[PIO] Add all used libraries in lib folder

[PIO] Update lib/default folder in Platformio.ini [PIO] Update lib/default folder in Platformio.ini [PIO] Add missing parts in library.properties files
2026-09-12 09:36:59 +00:00 · 2022-11-07 16:01:28 +01:00
parent 2731bd15dd
commit 24cd5a2d74
330 changed files with 68138 additions and 112 deletions
@@ -0,0 +1,109 @@
+/*
+  Signal Compensation
+  By: Paul Clark
+  Based on earlier code by: Nathan Seidle
+  SparkFun Electronics
+  Date: June 3rd, 2021
+  License: MIT. See license file for more information but you can
+  basically do whatever you want with this code.
+
+  Feel like supporting open source hardware?
+  Buy a board from SparkFun! https://www.sparkfun.com/products/18365
+
+  This example prints the current CO2 level, relative humidity, and temperature in C.
+
+  Hardware Connections:
+  Attach RedBoard to computer using a USB cable.
+  Connect SCD40/41 to RedBoard using Qwiic cable.
+  Open Serial Monitor at 115200 baud.
+*/
+
+#include <Wire.h>
+
+#include "SparkFun_SCD4x_Arduino_Library.h" //Click here to get the library: http://librarymanager/All#SparkFun_SCD4x
+SCD4x mySensor;
+
+void setup()
+{
+  Serial.begin(115200);
+  Serial.println(F("SCD4x Example"));
+  Wire.begin();
+
+  //mySensor.enableDebugging(); // Uncomment this line to get helpful debug messages on Serial
+
+  if (mySensor.begin() == false)
+  {
+    Serial.println(F("Sensor not detected. Please check wiring. Freezing..."));
+    while (1)
+      ;
+  }
+
+  //We need to stop periodic measurements before we can change the sensor signal compensation settings
+  if (mySensor.stopPeriodicMeasurement() == true)
+  {
+    Serial.println(F("Periodic measurement is disabled!"));
+  }  
+
+  //Now we can change the sensor settings.
+  //There are three signal compensation commands we can use: setTemperatureOffset; setSensorAltitude; and setAmbientPressure
+
+  Serial.print(F("Temperature offset is currently: "));
+  Serial.println(mySensor.getTemperatureOffset(), 2); // Print the temperature offset with two decimal places
+  mySensor.setTemperatureOffset(5); // Set the temperature offset to 5C
+  Serial.print(F("Temperature offset is now: "));
+  Serial.println(mySensor.getTemperatureOffset(), 2); // Print the temperature offset with two decimal places
+
+  Serial.print(F("Sensor altitude is currently: "));
+  Serial.println(mySensor.getSensorAltitude()); // Print the sensor altitude
+  mySensor.setSensorAltitude(1000); // Set the sensor altitude to 1000m
+  Serial.print(F("Sensor altitude is now: "));
+  Serial.println(mySensor.getSensorAltitude()); // Print the sensor altitude
+
+  //There is no getAmbientPressure command
+  bool success = mySensor.setAmbientPressure(98700); // Set the ambient pressure to 98700 Pascals
+  if (success)
+  {
+    Serial.println(F("setAmbientPressure was successful"));
+  }
+
+  //The signal compensation settings are stored in RAM by default and will reset if reInit is called
+  //or if the power is cycled. To store the settings in EEPROM we can call:
+  mySensor.persistSettings(); // Uncomment this line to store the sensor settings in EEPROM
+
+  //Just for giggles, while the periodic measurements are stopped, let's read the sensor serial number
+  char serialNumber[13]; // The serial number is 48-bits. We need 12 bytes plus one extra to store it as ASCII Hex
+  if (mySensor.getSerialNumber(serialNumber) == true)
+  {
+    Serial.print(F("The sensor's serial number is: 0x"));
+    Serial.println(serialNumber);
+  }
+
+  //Finally, we need to restart periodic measurements
+  if (mySensor.startPeriodicMeasurement() == true)
+  {
+    Serial.println(F("Periodic measurements restarted!"));
+  }
+}
+
+void loop()
+{
+  if (mySensor.readMeasurement()) // readMeasurement will return true when fresh data is available
+  {
+    Serial.println();
+
+    Serial.print(F("CO2(ppm):"));
+    Serial.print(mySensor.getCO2());
+
+    Serial.print(F("\tTemperature(C):"));
+    Serial.print(mySensor.getTemperature(), 1);
+
+    Serial.print(F("\tHumidity(%RH):"));
+    Serial.print(mySensor.getHumidity(), 1);
+
+    Serial.println();
+  }
+  else
+    Serial.print(F("."));
+
+  delay(500);
+}