[Build] Deduplicate libs and un-space lib foldernames

2026-09-12 01:24:04 +00:00 · 2022-12-07 20:32:48 +01:00
parent beee04a020
commit 4408170871
195 changed files with 196 additions and 8897 deletions
@@ -0,0 +1,78 @@
+/*
+  Disable Auto Calibration
+  By: Paul Clark
+  Based on earlier code by: Nathan Seidle
+  SparkFun Electronics
+  Date: June 3rd, 2021
+  License: MIT. See license file for more information but you can
+  basically do whatever you want with this code.
+
+  Feel like supporting open source hardware?
+  Buy a board from SparkFun! https://www.sparkfun.com/products/18365
+
+  This example prints the current CO2 level, relative humidity, and temperature in C.
+
+  Hardware Connections:
+  Attach RedBoard to computer using a USB cable.
+  Connect SCD40/41 to RedBoard using Qwiic cable.
+  Open Serial Monitor at 115200 baud.
+*/
+
+#include <Wire.h>
+
+#include "SparkFun_SCD4x_Arduino_Library.h" //Click here to get the library: http://librarymanager/All#SparkFun_SCD4x
+SCD4x mySensor;
+
+void setup()
+{
+  Serial.begin(115200);
+  Serial.println(F("SCD4x Example"));
+  Wire.begin();
+
+  //mySensor.enableDebugging(); // Uncomment this line to get helpful debug messages on Serial
+
+  //.begin has three boolean parameters:
+  //  measBegin: set to true to begin periodic measurements automatically;
+  //             set to false to leave periodic measurements disabled.
+  //             Default is true.
+  //  autoCalibrate: set to true to leave automatic calibration enabled;
+  //                 set to false to disable automatic calibration.
+  //                 Default is true.
+  //  skipStopPeriodicMeasurements: set to true to make .begin skip the initial call of stopPeriodicMeasurement;
+  //                                set to false to make .begin stop periodic measurements before doing anything else.
+  //                                Default is false.
+  //Please see the next example for a full description of skipStopPeriodicMeasurements
+
+  //In this example, we call .begin and set autoCalibrate to false to disable automatic calibration
+  if (mySensor.begin(true, false) == false)
+  //measBegin_________/     |
+  //autoCalibrate__________/
+  {
+    Serial.println(F("Sensor did not begin correctly. Please check wiring. Freezing..."));
+    while (1)
+      ;
+  }
+}
+
+void loop()
+{
+  if (mySensor.readMeasurement()) // readMeasurement will return true when fresh data is available
+  {
+    Serial.println();
+
+    Serial.print(F("CO2(ppm):"));
+    Serial.print(mySensor.getCO2());
+
+    Serial.print(F("\tTemperature(C):"));
+    Serial.print(mySensor.getTemperature(), 1);
+
+    Serial.print(F("\tHumidity(%RH):"));
+    Serial.print(mySensor.getHumidity(), 1);
+
+    Serial.println();
+  }
+  else
+    Serial.print(F("."));
+
+  delay(500);
+}