.. csv-table::
        :header: "Command", "Extra information"
        :widths: 20, 30

        "
        ``7dn,<number>``

        Example:

        ``7dn,[BME280#Humidity]`` to display the humidity measured by a BME280 sensor.

        ","
        Displays a numeric value on the display, with 1 decimal.
        "
        "
        ``7dt,<temperature>``

        Example:

        ``7dt,[BME280#Temperature]``

        ","
        To display the temperature measured by a BME280 sensor. By default includes a ° symbol, unless option 'Hide ° for Temperatures' is enabled.
        "
        "
        ``7ddt,<temperature1>,<temperature2>``

        Example:

        ``7ddt,[BME280#Temperature],[DS18b20#Temperature]``

        ","
        To display two temperatures measured, f.e. by a BME280 sensor and a DS18b20 sensor. Applicable for 8 digit or wider displays.
        "
        "
        ``7dst,<hh>,<mm>,<ss>``

        Example:

        ``7dst,%syshour%+6,%sysmin%,%syssec%``

        ","
        To display the time, f.e. for a different time zone.

        Can also be used to set a next appointment time externally.
        "
        "
        ``7dsd,<dd>,<mm>,<yy>``

        ","
        To display a date.
        "
        "
        ``7dtext,<text>``

        Examples:

        ``7dtext,OUT [BLK#Temperature#d2.1]^``

        ``7dtext,HU. [BLK#Humidity#d2.1]^o`` Will result in 'HU. 57.2°o' being displayed (8 digit or wider display)
        ","
        To display a text on the display. Any variable can be used. Unsupported characters (like accented letters) will show as a space (empty digit).

        With the Scroll Text option disabled, the first n characters the display can show are displayed, if the Scroll Text option is enabled, longer texts will scroll from right to left across the display, at the set speed.
        "
        "
        ``7dfont,<font>``

        ","
        Select a different font, either by name: ``Default`` or ``7dgt`` for the original font (0), ``Siekoo`` for standard Siekoo font (1), ``Siekoo_Upper`` for the Siekoo font with uppercase 'CHNORUX' characters (2), and ``dSEG7`` for the dSEG7 font (3). Numbers can also be used, 0, 1, 2, or 3 as noted. Fontnames are not case-sensitive.

        Only applicable when a 7-segment **Display Type** is selected.
        "
        "
        ``7dbin,[<byte>,|'<quoted text>']...``

        Example:

        ``7dbin,0x40,0x20,0x10,0x08,0x04,0x02,0x01,0x80`` (7-segment Display Type)
        
        ``7dbin,'ESPEasy is fun! and costs 0.00 ',2441,'uro'`` (14-segment Display Type, using the € sign)
        ","
        To display any bit pattern on the display.

        The example shows each digit with a different segment on, including the dot/colon, and assuming Scroll Text enabled.

        See explanation on how the bits map to segments, below.
        "
        "
        ``7don``

        ","
        Turn the display on.
        "
        "
        ``7doff``

        ","
        Turn the display off.
        "
        "
        ``7db,<0..15>``

        ","
        Set the brightness to the provided level.
        "
        "
        ``7output,<0..5>``

        ","
        Change the Display Output setting, available options:
        
        * 0 - Manual
        * 1 - Clock 24h - Blink
        * 2 - Clock 24h - No Blink
        * 3 - Clock 12h - Blink
        * 4 - Clock 12h - No Blink
        * 5 - Date
        "
        "
        ``7digit,<dgt>,<char/text>``

        ","
        Write content to a specific digit, or range of digits up to the end of the display (no scrolling supported)

        ``7digit,8,C.`` : Write a C with a period attached to digit 8 of the display (assuming it has at least 8 digits available).

        ``7digit,-4,0b110110`` : Write a bitmap (``||`` used here), similar to ``7dbin`` command, to a digit (the ``abs(dgt)`` value is used).
        "