.. csv-table::
    :header: "Command (GPIO/Value)", "Extra information"
    :widths: 20, 30

    "
    ``senseair_setrelay,<value>``

    Value:

    ``1`` will set the relay to ON.

    ``0`` will set the relay to OFF.

    ``-1`` will remove control over relay.
    ","
    Used in **tSense (K70)** to set the relay to either ``1`` or ``0``.
    Observe that using this command will take over the control of the relay from the
    tSense. If you want to give the control back you use the ``-1`` value.
    "