.. csv-table::
   :header: "Event", "Example"
   :widths: 30, 20

   "
   ``MQTTimport#Value1``
   Will trigger when the value is set from MQTT topic 1 payload.
   ","

   .. code-block:: none

      on MQTTimport#Value1 do
        GPIO,2,%eventvalue% // Turn on based on an MQTT message
      endon

   When option **Generate events for accepted topics** is enabled:

   .. code-block:: none

     on MQTTimport#Value1=on do
       event,switchToggle // See next example
     endon

   "
   "
   ``{mqtttopic}#{json_attribute}={attribute_value}``
   Will trigger when the JSON option is available and enabled, and a JSON message is received, for each JSON attribute, or the Attribute specified.

   Should best be used combined with the Filtering option.
   ","

   .. code-block:: none

      on domoticz/in#svalue do
        TaskValueSet,2,1,%eventvalue%
      endon

   .. code-block:: none

      on zigbee2mqtt/eria_dimswitch_1#action=on do
        event,switchToggle
      endon
      on switchToggle do // Sonoff switch here
        if [Relay#State]=1
          gpio,12,0 // Relay off
        else
          gpio,12,1 // Relay on
        endif
      endon
   
   "