.. csv-table::
   :header: "Event", "Example"
   :widths: 30, 20

   "
   ``foo#Temp`` Measured temperature in degree Celsius.

   ``foo#Humi`` Measured relative humidity in ``%``.

   A task named ``foo`` running ``PMS5003T`` or ``PMS500ST`` sensor may send an additional event for the measured temperature and humidity.
   ","

   .. code-block:: none

      on foo#Humi do
        if %eventvalue1% > 90
          GPIO,2,1 //LED on
        else
          GPIO,2,0 //LED off
        endif
      endon

   "
   "
   ``foo#HCHO`` Measured Formaldehyde concentration (in mg/m^3)

   A task named ``foo`` running ``PMS5003S`` or ``PMS500ST`` sensor may send an additional event for the measured Formaldehyde concentration.
   ","

   .. code-block:: none

      on foo#HCHO do
        if %eventvalue1% > 0.1
          GPIO,2,1 //LED on
        else
          GPIO,2,0 //LED off
        endif
      endon

   "
   "
   ``foo#cnt0.3`` Counted particles >= 0.3 micron.

   ``foo#cnt0.5`` Counted particles >= 0.5 micron.

   ``foo#cnt1.0`` Counted particles >= 1.0 micron.

   ``foo#cnt2.5`` Counted particles >= 2.5 micron.

   ``foo#cnt5`` Counted particles >= 5 micron.

   ``foo#cnt10`` Counted particles >= 10 micron.

   A task named ``foo`` may send an additional event for the counted number of particles per 0.1 liter (100 ml).

   ","

   .. code-block:: none

      on foo#cnt1.0 do
        if %eventvalue1% > 300
          GPIO,2,1 //LED on
        else
          GPIO,2,0 //LED off
        endif
      endon

   "
   "
   ``foo#pm1.0`` Particles <= 1.0 micron.

   ``foo#pm2.5`` Particles <= 2.5 micron.

   ``foo#pm10`` Particles <= 5 micron.

   A task named ``foo`` may send an additional event for the measured particles of a specific size in ug/m^3.
   
   ","

   .. code-block:: none

      on foo#pm1.0 do
        if %eventvalue1% > 300
          GPIO,2,1 //LED on
        else
          GPIO,2,0 //LED off
        endif
      endon

   "

.. note:: ``PMxx`` values relate to particles **less than or equal** to said size, while count/100ml relates to  particles of **at least** said size.
   Except when "Split count bins" is checked, then the "count/0.1L" values represent only a single bin.