.. csv-table::
   :header: "Event", "Example"
   :widths: 30, 20

   "
   ``<taskname>#<taskvar1>``

   The regular events like in every other task. Only difference here is that you may have an event either when the touch pad is touched, released or both.
   ","

   .. code-block:: none

      on touch#Touch do
       LogEntry,'Touch value %eventvalue%'
      endon

   "
   "
   ``<taskname>#Duration=``
   
   When enabled, this event will be sent on release of the touch pad. The event variable is the time in msec the pad had been touched.
   ","

   .. code-block:: none
   
      on touch#Duration do
         LogEntry,'Touch Duration %eventvalue% ms'
      endon
   
   Example in the log:

   .. code-block:: none
   
      6553261 : Info  : Touch : ADC2 ch5 (T5): 10
      6553338 : Info  : EVENT: touch#Touch=10.00
      6553638 : Info  : EVENT: touch#Duration=460
      6553653 : Info  : ACT  : LogEntry,'Touch Duration 460 ms'
      6553654 : Info  : Command: LogEntry
      6553655 : Info  : Touch Duration 460 ms

   "
   "
   ``<taskname>#<taskvar2>``

   An event is sent every time the state of <taskvar2> changes. 
   
   The state can be either **0** for released, **1** for touched and **10** for long press.
   ","

   .. code-block:: none

      on touch#State do
       if %eventvalue% != 10
         GPIO,2,%eventvalue% //LED on or off 
       else
         GPIO,3,1 // on longpress turn on another LED
       endif
      endon

   "