.. csv-table::
   :header: "Event", "Example"
   :widths: 30, 20

   "
   ``<taskname>#<valuename>``
   As described already, each task can produced one or more events, one for each measured value. You should not name your devices and value names so that the combination equals to any of the below listed system events!
   ","

   .. code-block:: html

        on DHT11Outside#Temperature>20 do
         GPIO,2,1
        endon

   "
   "
   ``System#Wake``
   Triggered after power on.
   ","

   .. code-block:: html

        on System#Wake do
          GPIO,15,1
        endon

   "
   "
   ``System#Boot``
   Triggered at boot time.
   ","

   .. code-block:: html

      on System#Boot do
        GPIO,2,1
        timerSet,1,30
      endon

   "
   "
   ``System#Sleep``
   Triggered just before the ESP goes to deep sleep.
   ","

   .. code-block:: html

	   on System#Sleep do
	    GPIO,2,0
	   endon

   "
   "
   ``MQTT#Connected``
   Triggered when the ESP has connected to broker.
   ","

   .. code-block:: html

	   on MQTT#Connected do
	    Publish,%sysname%/status,First message!
	   endon

   "
   "
   ``MQTT#Disconnected``
   Triggered when the ESP has disconnected from the broker.
   ","

   .. code-block:: html

	   on MQTT#Disconnected do
	    Reboot
	   endon

   "
   "
   ``MQTTimport#Connected``
   Triggered when the ESP has connected to broker (the MQTT Import plugin uses a separate connection than the generic one).
   ","

   .. code-block:: html

	   on MQTTimport#Connected do
	    Publish,%sysname%/status,MQTT Import is now operational
	   endon

   "
   "
   ``MQTTimport#Disconnected``
   Triggered when the ESP has disconnected from the broker (the MQTT Import plugin uses a separate connection than the generic one).
   ","

   .. code-block:: html

	   on MQTTimport#Disconnected do
	    Reboot
	   endon

   "
   "
   ``WiFi#Connected``
   Triggered when the ESP has connected to Wi-Fi.
   ","

   .. code-block:: html

	   on WiFi#Connected do
	    SendToHTTP,url.com,80,/report.php?hash=123abc456&t=[temp2#out]
	   endon

   "
   "
   ``WiFi#ChangedAccesspoint``
   Triggered when the ESP has changed to access point, will also trigger first time the unit connects to the Wi-Fi.
   ","

   .. code-block:: html

	   on WiFi#ChangedAccesspoint do
	    Publish,%sysname%/status,AP changed
	   endon

   "
   "
   ``WiFi#ChangedWiFichannel``
   Triggered when the ESP is connected to the AP on a different channel, will also trigger first time the unit connects to the Wi-Fi.
   This has been added in build mega-20190910
   ","

   .. code-block:: html

	   on WiFi#ChangedWiFichannel do
	    Publish,%sysname%/status,channel changed
	   endon

   "
   "
   ``WiFi#APmodeEnabled``
   Triggered when the ESP has set the AP mode (access point) active.
   This may happen when no valid WiFi settings are found or the ESP cannot connect to the set AP, but it can also be enabled via some command.
   N.B. Sending a publish command may not be very useful on this event, since this will mainly happen when there is no WiFi connection.
   ","

   .. code-block:: html

	   on WiFi#APmodeEnabled do
	    ... // Some command
	   endon

   "
   "
   ``WiFi#APmodeDisabled``
   Triggered when the ESP has disabled the AP mode (access point).
   This can happen some time (default 60 seconds) after a WiFi connection has been made. Or disabled using some command.
   ","

   .. code-block:: html

	   on WiFi#APmodeDisabled do
	    Publish,%sysname%/status,AP disabled
	   endon

   "
   "
   ``Login#Failed``
   Triggered when (someone) has tried to login to a ESP unit with admin password enabled, but have failed to enter correct password.
   ","

   .. code-block:: html

	   on Login#Failed do
	    Publish,%sysname%/warning,Intruder alert!
	   endon

   "
   "
   ``Time#Initialized``
   Triggered the first time (after boot) NTP is updating the unit.
   ","

   .. code-block:: html

	   on Time#Initialized do
	    Publish,%sysname%/Time,%systime%
	   endon

   "
   "
   ``Time#Set``
   Triggered when the time is set by an update from NTP.
   ","

   .. code-block:: html

	   on Time#Set do
	    Publish,%sysname%/Time,%systime%
	    Publish,%sysname%/NTP,Updated time at: %systime%
	   endon

   "
   "
   ``Rules#Timer=``
   As described already, triggered when a rules timer ends (setting a timer to 0 will disable the timer).
   ","

   .. code-block:: html

	   on Rules#Timer=1 do
	    GPIO,2,1
	   endon

   "
   "
   ``Clock#Time=``
   Triggered every minute with day and time like: Mon,12:30 or Tue,14:45. You can define triggers on specific days or all days using 'All' for days indicator. You can also use wildcards in the time setting like All,**:00 to run every hour.
   ","

   .. code-block:: html

	   on Clock#Time=All,12:00 do //will run once a day at noon
	    GPIO,2,1
	   endon

	   on Clock#Time=All,**:30 do //will run half past every hour
	    GPIO,2,1
	   endon

	   on Clock#Time=All,%sunrise% do //will run at sunrise  (%sunset% is also available)
	    GPIO,2,1
	   endon

   "
   "
   ``GPIO#N``
   If the command 'Monitor' is used to monitor a given pin you will receive an event for that GPIO as soon as it's state changes. As seen in the example you can always use the square brackets together with the task/value name of ``Plugin#GPIO#Pinstate#N`` to get the state, but to trigger events you need to add the monitor command (preferably at boot).
   ","

   .. code-block:: html

       on System#Boot do
        Monitor GPIO,15
       endon

        on GPIO#15=0 do
         if [Plugin#GPIO#Pinstate#13]=0
          // do something
         endif
        endon

        on GPIO#15=1 do
         if [Plugin#GPIO#Pinstate#13]=1
          // do something
         endif
        endon

   "