mirror of
https://github.com/letscontrolit/ESPEasy.git
synced 2026-09-12 09:36:59 +00:00
41 lines
1.5 KiB
Plaintext
41 lines
1.5 KiB
Plaintext
.. csv-table::
|
|
:header: "Command Syntax", "Extra information"
|
|
:widths: 20, 30
|
|
|
|
"
|
|
``<ch>`` = Output channel, 0, 1 or 2 (both channels)
|
|
","
|
|
When successfully changing an output value, the data will be sent to any configured Controller, and an event will also be generated when the Rules are enabled (Tools/Advanced).
|
|
"
|
|
"
|
|
``gp8403,volt,<ch>,<value>``
|
|
","
|
|
Set the output value for the channel(s) in volt. The range is determined by the configured Output range setting.
|
|
"
|
|
"
|
|
``gp8403,mvolt,<ch>,<value>``
|
|
","
|
|
Set the output value for the channel(s) in milli volt. The range is determined by the configured Output range setting.
|
|
"
|
|
"
|
|
``gp8403,range,<5|10>``
|
|
","
|
|
Set the output range to either 5 (0-5V) or 10 (0-10V). Is also set to the Device configuration, but not saved.
|
|
|
|
The range is applied to both channels, no separate configuration per channel supported by the chip.
|
|
"
|
|
"
|
|
``gp8403,preset,<ch>,<name>``
|
|
","
|
|
Set the output value for the channel(s) to the value configured for the preset stored with ``<name>``.
|
|
|
|
The value is range-checked before it is applied, so when configured for Output range 0-5V, a preset of 7V will be ignored.
|
|
|
|
When using duplicate names, the first matched preset will be used.
|
|
"
|
|
"
|
|
``gp8403,init,<ch>``
|
|
","
|
|
Set the output value for the channel(s) to the configured initial value(s). When both channels are addressed (2), each will get its own configured value.
|
|
"
|