mirror of
https://github.com/letscontrolit/ESPEasy.git
synced 2026-07-27 19:57:38 +00:00
51 lines
1.8 KiB
Plaintext
51 lines
1.8 KiB
Plaintext
.. csv-table::
|
|
:header: "Command Syntax", "Extra information"
|
|
:widths: 20, 30
|
|
|
|
"
|
|
| ``m,<param>[,<param>,<param>...]``
|
|
","
|
|
| Light up leds on the display, description of params below, all values treated as decimal.
|
|
|
|
| This is a low-level command, giving exact control over what led/segment is lit.
|
|
"
|
|
"
|
|
| ``mx,<param>[,<param>,<param>...]``
|
|
","
|
|
| Light up leds on the display, description of params below, all values treated as hexadecimal.
|
|
|
|
| This is a low-level command, giving exact control over what led/segment is lit.
|
|
"
|
|
"
|
|
| ``mnum,<param>[,<param>,<param>...]``
|
|
","
|
|
| Light up segments on the display, description of params below, all values to be used as numeric content for a 7-segment display.
|
|
"
|
|
"
|
|
| ``mprint,<text>``
|
|
","
|
|
| Light up numeric digits on a 7-segment display. If a colon is configured, and another character would land on that segment, then the colon-segment is skipped, a colon would be shown on the colon segment.
|
|
|
|
| This would be the standard command to display numeric data on the display, when not used in Clock-mode.
|
|
"
|
|
"
|
|
| ``mbr,<0..255>``
|
|
","
|
|
| Set the brightness of the display in given range, 0 is off, 255 is max. brightness.
|
|
"
|
|
"
|
|
| ``<param>``
|
|
","
|
|
| A ``<param>`` can be one of these:
|
|
|
|
| ``<value>`` : A numeric (or hexadecimal, without any prefix, for ``MX`` command) value, that is displayed starting on segment 0, auto-incrementing the segment for multiple values in a single command.
|
|
|
|
| ``<seg>=<value>`` : Address an explicit segment with a value.
|
|
|
|
| ``clear`` : Set all values to 0, turning off all leds/segments.
|
|
|
|
| ``test`` : Fill the leds/segments with a test-pattern.
|
|
|
|
| ``log`` : Write the current led-buffer values to the log (INFO level).
|
|
"
|