Files
ESPEasy/docs/source/Plugin/P120.rst
T

74 lines
1.7 KiB
ReStructuredText

.. include:: ../Plugin/_plugin_substitutions_p12x.repl
.. _P120_page:
|P120_typename|
==================================================
|P120_shortinfo|
Plugin details
--------------
Type: |P120_type|
Name: |P120_name|
Status: |P120_status|
GitHub: |P120_github|_
Maintainer: |P120_maintainer|
Used libraries: |P120_usedlibraries|
Description
-----------
The ADXL345 Acceleration sensor can be used to detect movement of the sensor in X, Y and Z direction, also supports detection of single and double taps, and free falling detection.
This sensor is sometimes combined with an ITG3205 Gyro sensor and a HMC5883L magneto position sensor on a single board, as these sensors are often used together because of their accompanying features.
Configuration
-------------
.. image:: P120_DeviceConfiguration.png
:alt: Device Configuration
**Name** A unique name should be entered here.
**Enabled** The device can be disabled or enabled. When not enabled the device should not use any resources.
I2C Options
^^^^^^^^^^^^
The available settings here depend on the build used. At least the **Force Slow I2C speed** option is available, but selections for the I2C Multiplexer can also be shown. For details see the :ref:`Hardware_page`
**I2C Address**: The address the device is using. Some boards holding this chip offer an extra connection SD0 that can be used to select the address. The available addresses are ``0x53`` and ``0x1D`` (secondary).
.. include:: P120_P125_common.repl
.. Commands available
.. ^^^^^^^^^^^^^^^^^^
.. .. include:: P120_commands.repl
.. Events
.. ~~~~~~
.. .. include:: P120_events.repl
Change log
----------
.. versionchanged:: 2.0
...
|added|
2021-10-30 Initial release version.