Michel2/ESPEasy
1
0
Fork 0
mirror of https://github.com/letscontrolit/ESPEasy.git synced 2026-07-28 04:07:47 +00:00
Code Issues Releases Activity
Files
44f4559f3c9bf90b51bd1d8401b1a0f771533bf3
ESPEasy/lib/Adafruit_TSL2591/Adafruit_TSL2591.cpp
T

530 lines
12 KiB
C++
Raw Blame History

/**************************************************************************/
/*!
@file Adafruit_TSL2591.cpp
@author KT0WN (adafruit.com)
This is a library for the Adafruit TSL2591 breakout board
This library works with the Adafruit TSL2591 breakout
----> https://www.adafruit.com/products/1980
Check out the links above for our tutorials and wiring diagrams
These chips use I2C to communicate
Adafruit invests time and resources providing this open source code,
please support Adafruit and open-source hardware by purchasing
products from Adafruit!
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2014 Adafruit Industries
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**************************************************************************/
#if defined(ESP8266) || defined(ESP32)
#include <pgmspace.h>
#else
#include <avr/pgmspace.h>
#endif
#if defined(__AVR__)
#include <util/delay.h>
#endif
#include <stdlib.h>
#include "Adafruit_TSL2591.h"
Adafruit_TSL2591::Adafruit_TSL2591(int32_t sensorID)
{
_initialized = false;
_integration = TSL2591_INTEGRATIONTIME_100MS;
_gain = TSL2591_GAIN_MED;
_sensorID = sensorID;
// we cant do wire initialization till later, because we havent loaded Wire yet
}
boolean Adafruit_TSL2591::begin(void)
{
//Wire.begin(); called in ESPEasy framework
/*
for (uint8_t i=0; i<0x20; i++)
{
uint8_t id = read8(0x12);
Serial.print("$"); Serial.print(i, HEX);
Serial.print(" = 0x"); Serial.println(read8(i), HEX);
}
*/
uint8_t id = read8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_DEVICE_ID);
if (id == 0x50 )
{
// Serial.println("Found Adafruit_TSL2591");
}
else
{
return false;
}
_initialized = true;
// Set default integration time and gain
setTiming(_integration);
setGain(_gain);
// Note: by default, the device is in power down mode on bootup
disable();
return true;
}
void Adafruit_TSL2591::enable(void)
{
if (!_initialized)
{
if (!begin())
{
return;
}
}
// Enable the device by setting the control bit to 0x01
write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_ENABLE, TSL2591_ENABLE_POWERON | TSL2591_ENABLE_AEN | TSL2591_ENABLE_AIEN | TSL2591_ENABLE_NPIEN);
}
void Adafruit_TSL2591::disable(void)
{
if (!_initialized)
{
if (!begin())
{
return;
}
}
// Disable the device by setting the control bit to 0x00
write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_ENABLE, TSL2591_ENABLE_POWEROFF);
}
void Adafruit_TSL2591::setGain(tsl2591Gain_t gain)
{
if (!_initialized)
{
if (!begin())
{
return;
}
}
enable();
_gain = gain;
const uint8_t value = static_cast<uint8_t>(_integration) | static_cast<uint8_t>(_gain);
write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_CONTROL, value);
disable();
}
tsl2591Gain_t Adafruit_TSL2591::getGain()
{
return _gain;
}
void Adafruit_TSL2591::setTiming(tsl2591IntegrationTime_t integration)
{
if (!_initialized)
{
if (!begin())
{
return;
}
}
enable();
_integration = integration;
const uint8_t value = static_cast<uint8_t>(_integration) | static_cast<uint8_t>(_gain);
write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_CONTROL, value);
disable();
}
tsl2591IntegrationTime_t Adafruit_TSL2591::getTiming()
{
return _integration;
}
float Adafruit_TSL2591::calculateLuxf(uint16_t ch0, uint16_t ch1)
{
float atime, again;
float cpl, lux1, lux2, lux;
//uint32_t chan0, chan1;
// Check for overflow conditions first
if ((ch0 == 0xFFFF) | (ch1 == 0xFFFF))
{
// Signal an overflow
return 0;
}
// Note: This algorithm is based on preliminary coefficients
// provided by AMS and may need to be updated in the future
switch (_integration)
{
case TSL2591_INTEGRATIONTIME_100MS :
atime = 100.0F;
break;
case TSL2591_INTEGRATIONTIME_200MS :
atime = 200.0F;
break;
case TSL2591_INTEGRATIONTIME_300MS :
atime = 300.0F;
break;
case TSL2591_INTEGRATIONTIME_400MS :
atime = 400.0F;
break;
case TSL2591_INTEGRATIONTIME_500MS :
atime = 500.0F;
break;
case TSL2591_INTEGRATIONTIME_600MS :
atime = 600.0F;
break;
default: // 100ms
atime = 100.0F;
break;
}
switch (_gain)
{
case TSL2591_GAIN_LOW :
again = 1.0F;
break;
case TSL2591_GAIN_MED :
again = 25.0F;
break;
case TSL2591_GAIN_HIGH :
again = 428.0F;
break;
case TSL2591_GAIN_MAX :
again = 9876.0F;
break;
default:
again = 1.0F;
break;
}
// cpl = (ATIME * AGAIN) / DF
cpl = (atime * again) / TSL2591_LUX_DF;
lux1 = (((float) ch0 - (float) ch1)) * (1.0F - ((float) ch1 / (float) ch0)) / cpl;//( (float)ch0 - (TSL2591_LUX_COEFB * (float)ch1) ) / cpl;
lux2 = ((TSL2591_LUX_COEFC * (float) ch0) - (TSL2591_LUX_COEFD * (float) ch1)) / cpl;
lux = lux1 > lux2 ? lux1 : lux2;
// Alternate lux calculation
//lux = ( (float)ch0 - ( 1.7F * (float)ch1 ) ) / cpl;
// Signal I2C had no errors
return lux;
}
uint32_t Adafruit_TSL2591::calculateLux(uint16_t ch0, uint16_t ch1)
{
return (uint32_t) calculateLuxf(ch0, ch1);
}
uint32_t Adafruit_TSL2591::getFullLuminosity (bool& finished)
{
const uint8_t status = read8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_DEVICE_STATUS);
// ALS Valid. Indicates that the ADC channels have completed an
// integration cycle since the AEN bit was asserted.
finished = status & 0x01;
if (!finished) {
return 0;
}
uint32_t x;
uint16_t y = 0;
y |= read16(TSL2591_COMMAND_BIT | TSL2591_REGISTER_CHAN0_LOW);
x = read16(TSL2591_COMMAND_BIT | TSL2591_REGISTER_CHAN1_LOW);
x <<= 16;
x |= y;
disable();
return x;
}
uint32_t Adafruit_TSL2591::getFullLuminosity (void)
{
if (!_initialized)
{
if (!begin())
{
return 0;
}
}
// Enable the device
enable();
// Wait x ms for ADC to complete
for (uint8_t d=0; d<=_integration; d++)
{
delay(120);
}
uint32_t x;
uint16_t y = 0;
y |= read16(TSL2591_COMMAND_BIT | TSL2591_REGISTER_CHAN0_LOW);
x = read16(TSL2591_COMMAND_BIT | TSL2591_REGISTER_CHAN1_LOW);
x <<= 16;
x |= y;
disable();
return x;
}
uint16_t Adafruit_TSL2591::getLuminosity (uint8_t channel)
{
uint32_t x = getFullLuminosity();
if (channel == TSL2591_FULLSPECTRUM)
{
// Reads two byte value from channel 0 (visible + infrared)
return (x & 0xFFFF);
}
else if (channel == TSL2591_INFRARED)
{
// Reads two byte value from channel 1 (infrared)
return (x >> 16);
}
else if (channel == TSL2591_VISIBLE)
{
// Reads all and subtracts out just the visible!
return ( (x & 0xFFFF) - (x >> 16));
}
// unknown channel!
return 0;
}
void Adafruit_TSL2591::registerInterrupt(uint16_t lowerThreshold, uint16_t upperThreshold)
{
if (!_initialized)
{
if (!begin())
{
return;
}
}
enable();
write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_THRESHOLD_NPAILTL, lowerThreshold);
write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_THRESHOLD_NPAILTH, lowerThreshold >> 8);
write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_THRESHOLD_NPAIHTL, upperThreshold);
write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_THRESHOLD_NPAIHTH, upperThreshold >> 8);
disable();
}
void Adafruit_TSL2591::registerInterrupt(uint16_t lowerThreshold, uint16_t upperThreshold, tsl2591Persist_t persist)
{
if (!_initialized)
{
if (!begin())
{
return;
}
}
enable();
write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_PERSIST_FILTER, persist);
write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_THRESHOLD_AILTL, lowerThreshold);
write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_THRESHOLD_AILTH, lowerThreshold >> 8);
write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_THRESHOLD_AIHTL, upperThreshold);
write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_THRESHOLD_AIHTH, upperThreshold >> 8);
disable();
}
void Adafruit_TSL2591::clearInterrupt()
{
if (!_initialized)
{
if (!begin())
{
return;
}
}
enable();
write8(TSL2591_CLEAR_INT);
disable();
}
uint8_t Adafruit_TSL2591::getStatus()
{
if (!_initialized)
{
if (!begin())
{
return 0;
}
}
// Enable the device
enable();
uint8_t x;
x = read8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_DEVICE_STATUS);
disable();
return x;
}
uint8_t Adafruit_TSL2591::read8(uint8_t reg)
{
uint8_t x;
Wire.beginTransmission(TSL2591_ADDR);
#if ARDUINO >= 100
Wire.write(reg);
#else
Wire.send(reg);
#endif
Wire.endTransmission();
Wire.requestFrom(TSL2591_ADDR, 1);
#if ARDUINO >= 100
x = Wire.read();
#else
x = Wire.receive();
#endif
// while (! Wire.available());
// return Wire.read();
return x;
}
uint16_t Adafruit_TSL2591::read16(uint8_t reg)
{
uint16_t x;
uint16_t t;
Wire.beginTransmission(TSL2591_ADDR);
#if ARDUINO >= 100
Wire.write(reg);
#else
Wire.send(reg);
#endif
Wire.endTransmission();
Wire.requestFrom(TSL2591_ADDR, 2);
#if ARDUINO >= 100
t = Wire.read();
x = Wire.read();
#else
t = Wire.receive();
x = Wire.receive();
#endif
x <<= 8;
x |= t;
return x;
}
void Adafruit_TSL2591::write8 (uint8_t reg, uint8_t value)
{
Wire.beginTransmission(TSL2591_ADDR);
#if ARDUINO >= 100
Wire.write(reg);
Wire.write(value);
#else
Wire.send(reg);
Wire.send(value);
#endif
Wire.endTransmission();
}
void Adafruit_TSL2591::write8 (uint8_t reg)
{
Wire.beginTransmission(TSL2591_ADDR);
#if ARDUINO >= 100
Wire.write(reg);
#else
Wire.send(reg);
#endif
Wire.endTransmission();
}
/**************************************************************************/
/*!
@brief Gets the most recent sensor event
*/
/**************************************************************************/
bool Adafruit_TSL2591::getEvent(sensors_event_t *event)
{
uint16_t ir, full;
uint32_t lum = getFullLuminosity();
/* Early silicon seems to have issues when there is a sudden jump in */
/* light levels. :( To work around this for now sample the sensor 2x */
lum = getFullLuminosity();
ir = lum >> 16;
full = lum & 0xFFFF;
/* Clear the event */
memset(event, 0, sizeof(sensors_event_t));
event->version = sizeof(sensors_event_t);
event->sensor_id = _sensorID;
event->type = SENSOR_TYPE_LIGHT;
event->timestamp = millis();
/* Calculate the actual lux value */
/* 0 = sensor overflow (too much light) */
event->light = calculateLux(full, ir);
return true;
}
/**************************************************************************/
/*!
@brief Gets the sensor_t data
*/
/**************************************************************************/
void Adafruit_TSL2591::getSensor(sensor_t *sensor)
{
/* Clear the sensor_t object */
memset(sensor, 0, sizeof(sensor_t));
/* Insert the sensor name in the fixed length char array */
strncpy (sensor->name, "TSL2591", sizeof(sensor->name) - 1);
sensor->name[sizeof(sensor->name)- 1] = 0;
sensor->version = 1;
sensor->sensor_id = _sensorID;
sensor->type = SENSOR_TYPE_LIGHT;
sensor->min_delay = 0;
sensor->max_value = 88000.0;
sensor->min_value = 0.0;
sensor->resolution = 1.0;
}
View Git Blame Copy Permalink