mirror of
https://github.com/letscontrolit/ESPEasy.git
synced 2026-09-12 17:45:49 +00:00
57 lines
1.9 KiB
Plaintext
57 lines
1.9 KiB
Plaintext
.. csv-table::
|
|
:header: "Command Syntax", "Extra information"
|
|
:widths: 20, 30
|
|
|
|
"
|
|
|
|
| ``Eastron,Pause``
|
|
| ``Eastron,Resume``
|
|
|
|
","
|
|
| ``Pause`` and ``Resume`` refer to the continuous reading of set registers of all connected Eastron modules.
|
|
| When changing a setting on a specific module, this background register reading must be temporarily halted by calling ``Eastron,Pause`` first.
|
|
| All commands are case insensitive.
|
|
|
|
"
|
|
"
|
|
|
|
| ``Eastron,SetBaud,<new_baudrate>[,<node_id>]``
|
|
| ``Eastron,SetID,<new_id>[,<node_id>]``
|
|
|
|
","
|
|
| The optional ``<node_id>`` parameter indicates the current Modbus address. When not given, the default of address ``1`` is assumed.
|
|
| Valid node IDs are ``1 ... 247``.
|
|
| Call ``Eastron,Pause`` before changing settings on the module.
|
|
| On some modules, like the SDM120, the user must press the button for 3 seconds to enter ``-set-`` mode.
|
|
| After enabling the ``-set-`` mode, these commands can be given and then the user must press the button for 3 seconds to store the changed settings.
|
|
|
|
|
| Changing ID is active immediately, thus the new ID must be used for commands given after changing the ID.
|
|
| Change of baud rate is only active after the module is power cycled.
|
|
|
|
|
| Allowed baud rates:
|
|
| SDM120 / SDM230:
|
|
| ``0`` = 2400 baud (default)
|
|
| ``1`` = 4800 baud
|
|
| ``2`` = 9600 baud
|
|
| ``5`` = 1200 baud
|
|
|
|
|
| SDM320 / SDM530Y:
|
|
| ``0`` = 2400 baud
|
|
| ``1`` = 4800 baud
|
|
| ``2`` = 9600 baud (default)
|
|
| ``5`` = 1200 baud
|
|
|
|
|
| SDM630 / SDM72 / SDM72V2:
|
|
| ``0`` = 2400 baud
|
|
| ``1`` = 4800 baud
|
|
| ``2`` = 9600 baud (default)
|
|
| ``3`` = 19200 baud
|
|
| ``4`` = 38400 baud
|
|
|
|
|
| The baud rate parameter can be given either as a value ``0`` ... ``5``, or the exact (supported) baud rate.
|
|
|
|
|
| All commands are case insensitive.
|
|
|
|
"
|
|
|