ESPEasy/docs/source/Plugin/P000_commands.repl

.. include:: ../Plugin/_plugin_substitutions_p00x.repl

.. csv-table::
    :header: "Command", "Class", "Purpose / Syntax"
    :widths: 8, 5, 30

    "Debug","
    :red:`Internal`","
    Change Serial port debug level

    ``Debug,<1-4>``"
    "
    IP","
    :red:`Internal`","
    Change IP address

    ``IP,<IP address>``"
    "
    Let","
    :red:`Internal`","
    Set the value of n (1..16).

    ``Let,<n>,<value>``"
    "
    LogEntry","
    :red:`Internal`","
    Add string to log

    ``LogEntry,<string>``"
    "
    Name","
    :red:`Internal`","
    Set the name of the unit

    ``Name,<new name>``"
    "
    Password","
    :red:`Internal`","
    Set the password of the unit

    ``Password,<new password>``"
    "
    Reboot","
    :red:`Internal`","
    Reboot the ESP

    ``Reboot``"
    "
    Reset","
    :red:`Internal`","
    Reset config to factory default. Caution, all settings will be lost!

    ``Reset``"
    "
    Reset Flash Write Counter","
    :red:`Internal`","
    Reset flash write to zero.

    ``ResetFlashWriteCounter``"
    "
    Rules","
    :red:`Internal`","
    Rules enabled (1) or rules disabled (0)

    ``Rules,<1/0>``"
    "
    Save","
    :red:`Internal`","
    Save config to persistent flash memory

    ``Save``"
    "
    Settings","
    :red:`Internal`","
    Show settings on serial terminal

    ``Settings``"
    "
    TaskClear","
    :red:`Internal`","
    Delete the given task/device

    ``TaskClear,<task/device nr>``"
    "
    TaskClearAll","
    :red:`Internal`","
    Delete ALL task/device

    ``TaskClearAll``"
    "
    TaskRun","
    :red:`Internal`","
    Run/excecute the given task/device, use to manually force an update/read of the task.

    ``TaskRun,<task/device nr>``"
    "
    Unit","
    :red:`Internal`","
    Set the unit number

    ``Unit,<unit number>``"
    "
    WifiAPKey","
    :red:`Internal`","
    Change AP WPA key

    ``WifiAPKey,<WPA key>``"
    "
    WifiAPMode","
    :red:`Internal`","
    Force the unit into AP mode.

    ``WifiAPMode``"
    "
    WifiConnect","
    :red:`Internal`","
    Connect to configured wireless network

    ``WifiConnect``"
    "
    WifiDisconnect","
    :red:`Internal`","
    Disconnect from wireless network

    ``WifiDisconnect``"
    "
    WifiKey","
    :red:`Internal`","
    Change WPA key for primary WiFi

    ``WifiKey,<Wifi WPA key>``"
    "
    WifiKey2","
    :red:`Internal`","
    Change WPA key for secondary WiFi

    ``WifiKey2,<Wifi WPA key>``"
    "
    WifiScan","
    :red:`Internal`","
    Scan Wireless networks

    ``WifiScan``"
    "
    WifiSSID","
    :red:`Internal`","
    Change SSID to connect as primary WiFi

    ``WifiSSID,<SSID>``"
    "
    WifiSSID2","
    :red:`Internal`","
    Change SSID to connect as secondry WiFi

    ``WifiSSID2,<SSID>``"
    "
    Delay","
    :green:`Rules`","
    Delay rule processing

    ``Delay,<delay in milliSeconds>``"
    "
    Publish","
    :green:`Rules`","
    Send command using MQTT broker service

    ``Publish,<topic>,<value>``"
    "
    SendTo","
    :green:`Rules`","
    Send command to other ESP (using UDP)

    ``SendTo,<unit nr>,<command>``"
    "
    SendToHTTP","
    :green:`Rules`","
    Send command to other network device using HTTP

    ``SendToHTTP,<IP address>,<Portnumber>,<command>``

    ``SendToHTTP,<domain>,<Portnumber>,</url>``"
    "
    SendToUDP","
    :green:`Rules`","
    Send command to other network device using UDP (non-ESP Easy units)

    ``SendToUDP,<IP address>,<Portnumber>,<command>``"
    "
    TaskValueSet","
    :green:`Rules`","
    Set values on a **Dummy Task** (device)

    ``TaskValueSet,<task/device nr>,<value nr>,<value/formula>``"
    "
    TimerSet","
    :green:`Rules`","
    Start a timed event

    ``TimerSet,<timernr>,<timeInSeconds>``

    ``TimerSet,<timernr>,0`` disables the timer"
    "
    Event","
    :blue:`Special`","
    Create an event, it's possible to send a float value along as well.

    See event syntax below..."


Event command
~~~~~~~~~~~~~

The event command is a special command used to trigger an event. This event can then be acted upon from the rules.
You can send 0..4 event values along with the event.


.. csv-table::
    :header: "Event / Info"
    :widths: 1

    "
    ``Event,SingleEvent``

    The event (triggered by any of the launch ways) will make the unit publish a message.

    **Rules example**

    .. code-block:: html

        on SingleEvent do
          Publish,%sysname%/Info,A single event has been triggered!
        endon
    "
    "
    ``Event,SingleValue=123``

    The event value ``123`` is intercepted and published.

    **Rules example**

    .. code-block:: html

      on SingleValue do
        Publish,%sysname%/Info,An event has been sent (%eventvalue%)!
      endon
    "
    "
    ``Event,Multi=1,2,3,99``

    The event value ``99`` (4) is intercepted and the rule ``TaskValueSet...`` is
    triggered, value of task 12 value 1 is then ``1 + 2`` = ``3`` or ``1 - 2`` = ``-1``.

    **Rules example**

    .. code-block:: html

      on Multi do
        if %eventvalue4%=99
          TaskValueSet,12,1,[%eventvalue1%+%eventvalue2%]
        else
          TaskValueSet,12,1,[%eventvalue3%-%eventvalue2%]
        endif
      endon
    "