mirror of
https://github.com/letscontrolit/ESPEasy.git
synced 2026-07-28 04:07:47 +00:00
esp8266nu
fb0a05a06b
Fixed a bug in setting for default delay Changed debug info Changed device tab, added more pin info and cancel button Fixed syslog loop bug
109 lines
4.5 KiB
Arduino
109 lines
4.5 KiB
Arduino
// R001 01-05-2015
|
|
// First 'stable' edition (meaning that it does not crash during boot of within one minute...)
|
|
|
|
// R002 02-05-2015
|
|
// Added configuration webinterface
|
|
// Start AP mode is ssid is not configured
|
|
|
|
// R003 06-05-2015
|
|
// Start AP mode if no connection, leave AP mode 30 seconds after succesfull connection
|
|
// Added option to set a fixed last octet of the ESP IP address (remaining config is still done with DHCP)
|
|
// This is the easiest way. You can still change subnet,gw,dns with DHCP but have a fixed IP
|
|
// This is convenient to control ESP with Domoticz http requests (relais, io expander, etc)
|
|
// Support for Domoticz multiple value sensor types (temp/hum/baro)
|
|
// Added support for pulsecounter
|
|
|
|
// R004 18-05-2015
|
|
// Fixed setting ip_octet to 0 on reset
|
|
// Fixed missing ; in domoticz send case 3:
|
|
// Fixed: Serial Pulse settings command did not work.
|
|
// Very experimental stuff for Nodo events on I2C (Nodo 3.8, R818)
|
|
// Some code optimization in string/char-array handling within webserver functions
|
|
// Replaced 'reboot function call' with ESP.reset
|
|
// Added hardware config web page to change io pins on ESP-01 boards
|
|
// Added basic stuff for UDP communications and syslog function
|
|
// Listens on UDP port 65500 for commands.
|
|
// Added connectionFailure counter
|
|
// Sends "WD <uptime in seconds> CF <connection failures>" every 30 seconds on serial to reset external watchdog
|
|
// Sends "WD <uptime in seconds> CF <connection failures>" to syslog if configured
|
|
// Delayed reboot on empty IP adress (in case of DHCP issue)
|
|
// Delayed reboot after 30 connection failures
|
|
|
|
// R005 21-05-2015
|
|
// Some fixes to be compabtible with Arduino 1.6.4 using ESP board addon 1.6.4.-628-g545ffde
|
|
|
|
// R006 23-05-2015
|
|
// Stored many constant strings to progmem
|
|
// delay(1) into http 'while' client check
|
|
// delay(10) in main loop instead of yield()
|
|
// DomoticzSend <type>,<idx>,<value> test command (via serial)
|
|
// Disabled analogRead, seems broken in g8cd3697 (use millis()/1000 as demo value!)
|
|
|
|
// R007 01-06-2015
|
|
// use custom counter for WD instead of millis() (millis does not reset on ESP.Reset)
|
|
// Changed BAUDrate to 9600
|
|
// DomoticzGet <type>, <idx> test command (via serial)
|
|
|
|
// R008 06-06-2015
|
|
// UDP listening port web configurable
|
|
// If UDP port enabled, also send IDX events to this UDP port
|
|
// Added Domotics lightswitch option, input on GPIO-0 pin.
|
|
|
|
// R009 26-06-2015
|
|
// Changed switch pin from GPIO-0 to wired input pin 1
|
|
// Added config options for static IP/gateway/subnet
|
|
// Using LCD library instead of local functions
|
|
// Added MQTT library
|
|
// Added JSON parse library
|
|
// Needs Domoticz 2560 and Mosquitto 3.1.1 or higher
|
|
// Reduced EEPROM from 4096->1024 (needs a RAM buffer from same size!)
|
|
// Added basic logging to web interface
|
|
|
|
// R010 30-06-2015
|
|
// Changed freemem request in root web page
|
|
// Some memory reduced by eliminating globals
|
|
// Init MQTT at boot only if protocol is set to MQTT
|
|
// Added syslog level for detailed logging
|
|
// Added menu buttons in webgui and stuctured data as HTML tables
|
|
|
|
// R011 12-07-2015
|
|
// Changed javascript link buttons into CSS button styled href links
|
|
// Fixed Main button, only worked on IE.
|
|
// Changed connectionFailures counting
|
|
// Reboot from main loop instead of web event callback
|
|
// Changed logging configuration
|
|
// BaudRate can be configured through webgui, defaults to 115200
|
|
// Added Serial.setDebugOutput(true) if serial loglevel = 4 (debug_more level)
|
|
// Added telnet protocol to send variable data to a Nodo Mega controller
|
|
// Added webgui I2C scanner
|
|
// Added webgui Wifi scanner
|
|
// Fixed bug in settingssave on devices
|
|
// Added delay(1) in Domoticz_sendData, while available loop
|
|
|
|
// R012 07-08-2015
|
|
// IMPORTANT NOTICE: this release needs ESP Package version 1.6.5-947-g39819f0, built on Jul 23, 2015)
|
|
// If udp port = 0 no actions!
|
|
// Used sprintf_P to save more RAM
|
|
// Added login page and admin password
|
|
// Added hardware custom gpio pin selection
|
|
// Added sanity check on BMP085 pressure values
|
|
|
|
// R013 15-08-2015
|
|
// Added configurable message delay in ms (delay between messages to controller)
|
|
// Changed login password field to type 'password'
|
|
// Fixed io pin settings for Dallas/DHT for inconsecutive pin configuration (ESP-01)
|
|
// Support for ThingsSpeak "controller" (webservice)
|
|
|
|
// R014 20-08-2015
|
|
// Redesigned device configuration mechanisme
|
|
// Changed password timeout to 5 minutes
|
|
// Added direct GPIO output control without password request
|
|
|
|
// R015 22-08-2015
|
|
// Fixed a bug in DHT22 device
|
|
// Fixed a bug in setting for default delay
|
|
// Changed debug info
|
|
// Changed device tab, added more pin info and cancel button
|
|
// Fixed syslog loop bug
|
|
|