Michel2/ESPEasy
1
0
Fork 0
mirror of https://github.com/letscontrolit/ESPEasy.git synced 2026-09-12 17:45:49 +00:00
Code Issues Releases Activity
Files
fc2bcabe2c282f7981edd0b7198e2e052d5687b6
ESPEasy/src/define_plugin_sets.h
T
Gijs Noorlander fc2bcabe2c Merge pull request #2604 from jimmys01/RX_pass_string_val 
[IR] Sent decoded values back to the controller
2019-11-27 09:20:18 +01:00

1008 lines
28 KiB
C
Raw Blame History

#ifndef DEFINE_PLUGIN_SETS_H
#define DEFINE_PLUGIN_SETS_H
#include "ESPEasy_common.h"
/*
#################################################
This is the place where plugins are registered
#################################################
To create/register a plugin, you have to :
- find an available number, ie 777.
- Create your own plugin, ie as "_P777_myfunction.ino"
- be sure it starts with ""#ifdef USES_P777", and ends with "#endif"
- then register it into the PLUGIN_SET_EXPERIMENTAL block (see below)
#ifdef PLUGIN_SET_EXPERIMENTAL
#define USES_P777 // MYsuperPlugin
#endif
- you can from now on test it by compiling using the PLUGIN_BUILD_DEV flag
either by adding "-DPLUGIN_BUILD_DEV" when compiling, or by momentarly
adding "#define PLUGIN_BUILD_DEV" at the top of the ESPEasy.ino file
- You will then have to push a PR including your plugin + the corret line (#define USES_P777) added to this file
When found stable enough, the maintainer (and only him) will choose to move it to TESTING or STABLE
*/
//#define FEATURE_SD
/******************************************************************************\
* WebServer pages **********************************************************
\******************************************************************************/
// FIXME TD-er: Make useful selections for these pages to be included. (e.g. view only)
#ifndef WEBSERVER_CUSTOM_BUILD_DEFINED
#ifndef WEBSERVER_TIMINGSTATS
#define WEBSERVER_TIMINGSTATS
#endif
#ifndef WEBSERVER_SYSVARS
#define WEBSERVER_SYSVARS
#endif
#ifndef WEBSERVER_NEW_UI
// #define WEBSERVER_NEW_UI
#endif
#ifndef WEBSERVER_I2C_SCANNER
#define WEBSERVER_I2C_SCANNER
#endif
#ifndef WEBSERVER_FAVICON
#define WEBSERVER_FAVICON
#endif
#ifndef WEBSERVER_LOG
#define WEBSERVER_LOG
#endif
#ifndef WEBSERVER_GITHUB_COPY
#define WEBSERVER_GITHUB_COPY
#endif
#ifndef WEBSERVER_ROOT
#define WEBSERVER_ROOT
#endif
#ifndef WEBSERVER_ADVANCED
#define WEBSERVER_ADVANCED
#endif
#ifndef WEBSERVER_CONFIG
#define WEBSERVER_CONFIG
#endif
#ifndef WEBSERVER_CONTROL
#define WEBSERVER_CONTROL
#endif
#ifndef WEBSERVER_CONTROLLERS
#define WEBSERVER_CONTROLLERS
#endif
#ifndef WEBSERVER_DEVICES
#define WEBSERVER_DEVICES
#endif
#ifndef WEBSERVER_DOWNLOAD
#define WEBSERVER_DOWNLOAD
#endif
#ifndef WEBSERVER_FACTORY_RESET
#define WEBSERVER_FACTORY_RESET
#endif
#ifndef WEBSERVER_FILELIST
#define WEBSERVER_FILELIST
#endif
#ifndef WEBSERVER_HARDWARE
#define WEBSERVER_HARDWARE
#endif
#ifndef WEBSERVER_PINSTATES
#define WEBSERVER_PINSTATES
#endif
#ifndef WEBSERVER_RULES
#define WEBSERVER_RULES
#endif
#ifndef WEBSERVER_SETUP
#define WEBSERVER_SETUP
#endif
#ifndef WEBSERVER_SYSINFO
#define WEBSERVER_SYSINFO
#endif
#ifndef WEBSERVER_TOOLS
#define WEBSERVER_TOOLS
#endif
#ifndef WEBSERVER_UPLOAD
#define WEBSERVER_UPLOAD
#endif
#ifndef WEBSERVER_WIFI_SCANNER
#define WEBSERVER_WIFI_SCANNER
#endif
#endif
#ifndef USE_CUSTOM_H
#ifndef USES_SSDP
#define USES_SSDP
#endif
#ifndef USES_TIMING_STATS
#define USES_TIMING_STATS
#endif
#endif
#ifdef MEMORY_ANALYSIS
#ifdef MQTT_ONLY
#define USES_C002 // Domoticz MQTT
#define USES_C005 // Home Assistant (openHAB) MQTT
#define USES_C006 // PiDome MQTT
#define USES_C014 // homie 3 & 4dev MQTT
#define USES_P037 // MQTTImport
#endif
#endif
/******************************************************************************\
* Available options **********************************************************
\******************************************************************************/
#if defined(CORE_POST_2_5_0) && !defined(MEMORY_ANALYSIS) && !defined(USE_CUSTOM_H)
#ifndef USE_SETTINGS_ARCHIVE
// FIXME TD-er: Disabled for now, to reduce binary size
// #define USE_SETTINGS_ARCHIVE
#endif // USE_SETTINGS_ARCHIVE
#endif
#if defined(USE_SETTINGS_ARCHIVE) && defined(FORCE_PRE_2_5_0)
#undef USE_SETTINGS_ARCHIVE
#endif
/******************************************************************************\
* BUILD Configs **************************************************************
\******************************************************************************/
// IR library is large, so make a separate build including stable plugins and IR.
#ifdef PLUGIN_BUILD_DEV_IR
#define PLUGIN_BUILD_DEV // add dev
#define PLUGIN_BUILD_IR
#endif
#ifdef PLUGIN_BUILD_TESTING_IR
#define PLUGIN_BUILD_TESTING // add testing
#define PLUGIN_BUILD_IR
#endif
#ifdef PLUGIN_BUILD_MINIMAL_IR
#define PLUGIN_BUILD_MINIMAL_OTA
#define PLUGIN_DESCR "Minimal, IR"
#define PLUGIN_BUILD_IR
#endif
#ifdef PLUGIN_BUILD_MINIMAL_IRext
#define PLUGIN_BUILD_MINIMAL_OTA
#define PLUGIN_DESCR "Minimal, IR with AC"
#define PLUGIN_BUILD_IR_EXTENDED
#endif
#ifdef PLUGIN_BUILD_NORMAL_IR
#define PLUGIN_BUILD_NORMAL // add stable
#define PLUGIN_DESCR "Normal, IR"
#define PLUGIN_BUILD_IR
#endif
#ifdef PLUGIN_BUILD_NORMAL_IRext
#define PLUGIN_BUILD_NORMAL // add stable
#define PLUGIN_DESCR "Normal, IR with AC"
#define PLUGIN_BUILD_IR_EXTENDED
#endif
#ifdef PLUGIN_BUILD_DEV
#define PLUGIN_SET_EXPERIMENTAL
#define CONTROLLER_SET_EXPERIMENTAL
#define NOTIFIER_SET_EXPERIMENTAL
#define PLUGIN_BUILD_TESTING // add testing
#endif
#ifdef PLUGIN_BUILD_TESTING
#define PLUGIN_SET_TESTING
#define CONTROLLER_SET_TESTING
#define NOTIFIER_SET_TESTING
#define PLUGIN_BUILD_NORMAL // add stable
#endif
#ifndef PLUGIN_BUILD_CUSTOM
#ifndef PLUGIN_BUILD_NORMAL
#define PLUGIN_BUILD_NORMAL // defaults to stable, if not custom
#endif
#endif
#ifdef PLUGIN_BUILD_NORMAL
#define PLUGIN_SET_STABLE
#define CONTROLLER_SET_STABLE
#define NOTIFIER_SET_STABLE
#ifndef BUILD_NO_DEBUG
#define BUILD_NO_DEBUG
#endif
#endif
#ifdef PLUGIN_BUILD_MINIMAL_OTA
#ifndef PLUGIN_DESCR
#define PLUGIN_DESCR "Minimal 1M OTA"
#endif
#define CONTROLLER_SET_NONE
#define BUILD_MINIMAL_OTA
#ifndef BUILD_NO_DEBUG
#define BUILD_NO_DEBUG
#endif
#define USES_C001 // Domoticz HTTP
#define USES_C002 // Domoticz MQTT
#define USES_C005 // Home Assistant (openHAB) MQTT
// #define USES_C006 // PiDome MQTT
#define USES_C008 // Generic HTTP
#define USES_C009 // FHEM HTTP
// #define USES_C010 // Generic UDP
#define USES_C013 // ESPEasy P2P network
// #define NOTIFIER_SET_STABLE
#define NOTIFIER_SET_NONE
#define PLUGIN_SET_NONE
#ifdef USE_SETTINGS_ARCHIVE
#undef USE_SETTINGS_ARCHIVE
#endif // USE_SETTINGS_ARCHIVE
#ifdef USES_TIMING_STATS
#undef USES_TIMING_STATS
#endif
#ifndef USES_P001
#define USES_P001 // switch
#endif
#ifndef USES_P026
#define USES_P026 // SysInfo
#endif
#ifndef USES_P033
#define USES_P033 // Dummy
#endif
#ifndef USES_P037
// #define USES_P037 // MQTTImport
#endif
#ifndef USES_P004
// #define USES_P004 // Dallas
#endif
#ifndef USES_P005
// #define USES_P005 // DHT
#endif
#ifdef USE_SERVO
#undef USE_SERVO
#endif
#endif
// Strip out parts not needed for either MINIMAL_OTA and MEMORY_ANALYSIS
#if defined(BUILD_MINIMAL_OTA) || defined(MEMORY_ANALYSIS)
#ifndef WEBSERVER_CUSTOM_BUILD_DEFINED
#ifdef WEBSERVER_TIMINGSTATS
#undef WEBSERVER_TIMINGSTATS
#endif
#ifdef WEBSERVER_SYSVARS
#undef WEBSERVER_SYSVARS
#endif
#ifdef WEBSERVER_NEW_UI
#undef WEBSERVER_NEW_UI
#endif
#ifdef WEBSERVER_I2C_SCANNER
#undef WEBSERVER_I2C_SCANNER
#endif
#ifdef WEBSERVER_FAVICON
#undef WEBSERVER_FAVICON
#endif
#ifdef WEBSERVER_LOG
#undef WEBSERVER_LOG
#endif
#ifdef WEBSERVER_GITHUB_COPY
#undef WEBSERVER_GITHUB_COPY
#endif
#ifdef WEBSERVER_PINSTATES
#undef WEBSERVER_PINSTATES
#endif
#ifdef WEBSERVER_WIFI_SCANNER
#undef WEBSERVER_WIFI_SCANNER
#endif
#ifdef USES_SSDP
#undef USES_SSDP
#endif
#endif // WEBSERVER_CUSTOM_BUILD_DEFINED
#endif
#ifdef BUILD_NO_DEBUG
#ifdef WEBSERVER_RULES_DEBUG
#undef WEBSERVER_RULES_DEBUG
#endif
#endif
/******************************************************************************\
* IR plugins *****************************************************************
\******************************************************************************/
// See lib\IRremoteESP8266\src\IRremoteESP8266.h
// Disable all settings like these when not needed:
// #define DECODE_TOSHIBA_AC true
// #define SEND_TOSHIBA_AC true
#ifdef PLUGIN_BUILD_IR
#define PLUGIN_DESCR "IR"
#define USES_P016 // IR
#define P016_SEND_IR_TO_CONTROLLER false //IF true then the JSON replay solution is transmited back to the condroller.
#define USES_P035 // IRTX
#define P016_P035_USE_RAW_RAW2 //Use the RAW and RAW2 encodings, disabling it saves 3.7Kb
#endif
#ifdef PLUGIN_BUILD_IR_EXTENDED
#ifndef PLUGIN_DESCR
#define PLUGIN_DESCR "IR Extended"
#endif // PLUGIN_DESCR
#define USES_P016 // IR
#define P016_SEND_IR_TO_CONTROLLER false //IF true then the JSON replay solution is transmited back to the condroller.
#define USES_P035 // IRTX
// The following define is needed for extended decoding of A/C Messages and or using standardised common arguments for controlling all deeply supported A/C units
#define P016_P035_Extended_AC
#define P016_P035_USE_RAW_RAW2 //Use the RAW and RAW2 encodings, disabling it saves 3.7Kb
#define USES_P088 // ToniA IR plugin
#define PLUGIN_SET_ONLY_SWITCH
#define USES_P029 // Output - Domoticz MQTT Helper
#define PLUGIN_SET_ONLY_TEMP_HUM
#endif
#ifdef PLUGIN_BUILD_IR_EXTENDED_NO_RX
#ifndef PLUGIN_DESCR
#define PLUGIN_DESCR "IR Extended, no IR RX"
#endif // PLUGIN_DESCR
#define USES_P035 // IRTX
// The following define is needed for extended decoding of A/C Messages and or using standardised common arguments for controlling all deeply supported A/C units
#define P016_P035_Extended_AC
#define P016_P035_USE_RAW_RAW2 //Use the RAW and RAW2 encodings, disabling it saves 3.7Kb
#define USES_P088 //ToniA IR plugin
#endif
/******************************************************************************\
* Devices ********************************************************************
\******************************************************************************/
// Itead ----------------------------
#ifdef PLUGIN_SET_SONOFF_BASIC
#define PLUGIN_DESCR "Sonoff Basic"
#define PLUGIN_SET_ONLY_SWITCH
#endif
#ifdef PLUGIN_SET_SONOFF_TH1x
#define PLUGIN_DESCR "Sonoff TH10/TH16"
#define PLUGIN_SET_ONLY_SWITCH
#define PLUGIN_SET_ONLY_TEMP_HUM
#endif
#ifdef PLUGIN_SET_SONOFF_POW
#define PLUGIN_DESCR "Sonoff POW R1/R2"
#define CONTROLLER_SET_STABLE
#define PLUGIN_SET_ONLY_SWITCH
#define USES_P076 // HWL8012 in POW r1
// Needs CSE7766 Energy sensor, via Serial RXD 4800 baud 8E1 (GPIO1), TXD (GPIO3)
#define USES_P077 // CSE7766 in POW R2
#define USES_P081 // Cron
#endif
#ifdef PLUGIN_SET_SONOFF_S2x
#define PLUGIN_DESCR "Sonoff S20/22/26"
#define PLUGIN_SET_ONLY_SWITCH
#endif
#ifdef PLUGIN_SET_SONOFF_4CH
#define PLUGIN_DESCR "Sonoff 4CH"
#define PLUGIN_SET_ONLY_SWITCH
#endif
#ifdef PLUGIN_SET_SONOFF_TOUCH
#define PLUGIN_DESCR "Sonoff Touch"
#define PLUGIN_SET_ONLY_SWITCH
#endif
// Shelly ----------------------------
#ifdef PLUGIN_SET_SHELLY_1
#define PLUGIN_DESCR "Shelly 1"
#define PLUGIN_SET_ONLY_SWITCH
#define CONTROLLER_SET_STABLE
#define NOTIFIER_SET_STABLE
#endif
// Easy ----------------------------
#ifdef PLUGIN_SET_EASY_TEMP
#define PLUGIN_DESCR "Temp Hum"
#define PLUGIN_SET_ONLY_TEMP_HUM
#endif
#ifdef PLUGIN_SET_EASY_CARBON
#define PLUGIN_DESCR "Carbon"
#define PLUGIN_SET_NONE
#define USES_P052 // SenseAir
#endif
/*
#ifdef PLUGIN_SET_EASY_NEXTION
#define PLUGIN_SET_ONLY_SWITCH
//#define USES_Pxxx // Nextion
#endif
*/
#ifdef PLUGIN_SET_EASY_OLED1
#define PLUGIN_SET_ONLY_SWITCH
#define USES_P036 // FrameOLED
#endif
#ifdef PLUGIN_SET_EASY_OLED2
#define PLUGIN_SET_ONLY_SWITCH
#define USES_P023 // OLED
#endif
#ifdef PLUGIN_SET_EASY_RELAY
#define PLUGIN_SET_ONLY_SWITCH
#endif
// LedStrips ----------------------------
#ifdef PLUGIN_SET_H801
#define PLUGIN_SET_ONLY_LEDSTRIP
#endif
#ifdef PLUGIN_SET_MAGICHOME
#define PLUGIN_SET_ONLY_LEDSTRIP
#endif
#ifdef PLUGIN_SET_MAGICHOME_IR
#define PLUGIN_SET_ONLY_LEDSTRIP
#define USES_P016 // IR
#endif
// Generic ESP32 -----------------------------
#ifdef PLUGIN_SET_GENERIC_ESP32
#define PLUGIN_DESCR "Generic ESP32"
#ifndef ESP32
#define ESP32
#endif
#ifdef ESP8266
#undef ESP8266
#endif
#define PLUGIN_SET_ONLY_SWITCH
#define USES_P036 // FrameOLED
#define USES_P027 // INA219
#define USES_P028 // BME280
#endif
#ifdef PLUGIN_SET_TEST_ESP32
#define PLUGIN_DESCR "TEST ESP32"
#ifndef ESP32
#define ESP32
#endif
#ifdef ESP8266
#undef ESP8266
#endif
// #define PLUGIN_SET_ONLY_SWITCH
#define PLUGIN_SET_TESTING
#define CONTROLLER_SET_STABLE
#define NOTIFIER_SET_STABLE
#define PLUGIN_SET_STABLE // add stable
// See also PLUGIN_SET_TEST_ESP32 section at end,
// where incompatible plugins will be disabled.
// TODO : Check compatibility of plugins for ESP32 board.
#endif
// Generic ------------------------------------
#ifdef PLUGIN_SET_GENERIC_1M
#define PLUGIN_SET_NONE
// TODO : small list of common plugins to fit in 1M
#endif
// Ventus W266 --------------------------------
#ifdef PLUGIN_SET_VENTUS_W266
#define PLUGIN_SET_ONLY_SWITCH
#define PLUGIN_BUILD_DISABLED
#define USES_P046 // TESTING Hardware P046_VentusW266.ino
#endif
/******************************************************************************\
* "ONLY" shorcuts ************************************************************
\******************************************************************************/
#ifdef PLUGIN_SET_ONLY_SWITCH
#ifndef PLUGIN_SET_NONE
#define PLUGIN_SET_NONE
#endif
#ifndef USES_P001
#define USES_P001 // switch
#endif
#ifndef USES_P003
// #define USES_P003 // pulse
#endif
#ifndef USES_P026
#define USES_P026 // SysInfo
#endif
#ifndef USES_P033
#define USES_P033 // Dummy
#endif
#ifndef USES_P037
#define USES_P037 // MQTTImport
#endif
#endif
#ifdef PLUGIN_SET_ONLY_TEMP_HUM
#ifndef PLUGIN_SET_NONE
#define PLUGIN_SET_NONE
#endif
#ifndef USES_P004
#define USES_P004 // Dallas
#endif
#ifndef USES_P005
#define USES_P005 // DHT
#endif
#ifndef USES_P014
#define USES_P014 // SI7021
#endif
#ifndef USES_P028
#define USES_P028 // BME280
#endif
#ifndef USES_P034
#define USES_P034 // DHT12
#endif
#endif
#ifdef PLUGIN_SET_ONLY_LEDSTRIP
#ifndef PLUGIN_SET_NONE
#define PLUGIN_SET_NONE
#endif
#ifndef USES_P141
#define USES_P141 // LedStrip
#endif
#ifndef USES_P037
#define USES_P037 // MQTTImport
#endif
#endif
/******************************************************************************\
* Main Families **************************************************************
\******************************************************************************/
// NONE #####################################
#ifdef PLUGIN_SET_NONE
#ifdef PLUGIN_SET_STABLE
#undef PLUGIN_SET_STABLE
#endif
#ifdef PLUGIN_SET_TESTING
#undef PLUGIN_SET_TESTING
#endif
#ifdef PLUGIN_SET_EXPERIMENTAL
#undef PLUGIN_SET_EXPERIMENTAL
#endif
#endif
#ifdef CONTROLLER_SET_NONE
#ifdef CONTROLLER_SET_STABLE
#undef CONTROLLER_SET_STABLE
#endif
#ifdef CONTROLLER_SET_TESTING
#undef CONTROLLER_SET_TESTING
#endif
#ifdef CONTROLLER_SET_EXPERIMENTAL
#undef CONTROLLER_SET_EXPERIMENTAL
#endif
#endif
#ifdef NOTIFIER_SET_NONE
#ifdef NOTIFIER_SET_STABLE
#undef NOTIFIER_SET_STABLE
#endif
#ifdef NOTIFIER_SET_TESTING
#undef NOTIFIER_SET_TESTING
#endif
#ifdef NOTIFIER_SET_EXPERIMENTAL
#undef NOTIFIER_SET_EXPERIMENTAL
#endif
#endif
// ALL ###########################################
#ifdef PLUGIN_SET_ALL
#ifndef PLUGIN_SET_STABLE
#define PLUGIN_SET_STABLE
#endif
#ifndef PLUGIN_SET_TESTING
#define PLUGIN_SET_TESTING
#endif
#ifndef PLUGIN_SET_EXPERIMENTAL
#define PLUGIN_SET_EXPERIMENTAL
#endif
#endif
#ifdef CONTROLLER_SET_ALL
#ifndef CONTROLLER_SET_STABLE
#define CONTROLLER_SET_STABLE
#endif
#ifndef CONTROLLER_SET_TESTING
#define CONTROLLER_SET_TESTING
#endif
#ifndef CONTROLLER_SET_EXPERIMENTAL
#define CONTROLLER_SET_EXPERIMENTAL
#endif
#endif
#ifdef NOTIFIER_SET_ALL
#ifndef NOTIFIER_SET_STABLE
#define NOTIFIER_SET_STABLE
#endif
#ifndef NOTIFIER_SET_TESTING
#define NOTIFIER_SET_TESTING
#endif
#ifndef NOTIFIER_SET_EXPERIMENTAL
#define NOTIFIER_SET_EXPERIMENTAL
#endif
#endif
// STABLE #####################################
#ifdef PLUGIN_SET_STABLE
#define USE_SERVO
#define USES_P001 // Switch
#define USES_P002 // ADC
#define USES_P003 // Pulse
#define USES_P004 // Dallas
#define USES_P005 // DHT
#define USES_P006 // BMP085
#define USES_P007 // PCF8591
#define USES_P008 // RFID
#define USES_P009 // MCP
#define USES_P010 // BH1750
#define USES_P011 // PME
#define USES_P012 // LCD
#define USES_P013 // HCSR04
#define USES_P014 // SI7021
#define USES_P015 // TSL2561
// #define USES_P016 // IR
#define USES_P017 // PN532
#define USES_P018 // Dust
#define USES_P019 // PCF8574
#define USES_P020 // Ser2Net
#define USES_P021 // Level
#define USES_P022 // PCA9685
#define USES_P023 // OLED
#define USES_P024 // MLX90614
#define USES_P025 // ADS1115
#define USES_P026 // SysInfo
#define USES_P027 // INA219
#define USES_P028 // BME280
#define USES_P029 // Output
// #define USES_P030 // BMP280 (Made obsolete, now BME280 can handle both)
#define USES_P031 // SHT1X
#define USES_P032 // MS5611
#define USES_P033 // Dummy
#define USES_P034 // DHT12
// #define USES_P035 // IRTX
#define USES_P036 // FrameOLED
#define USES_P037 // MQTTImport
#define USES_P038 // NeoPixel
#define USES_P039 // Environment - Thermocouple
#define USES_P040 // RFID - ID12LA/RDM6300
// FIXME TD-er: Disabled NeoClock and Candle plugin to make builds fit in max bin size.
// #define USES_P041 // NeoClock
// #define USES_P042 // Candle
#define USES_P043 // ClkOutput
#define USES_P044 // P1WifiGateway
#define USES_P049 // MHZ19
#define USES_P052 // SenseAir
#define USES_P056 // SDS011-Dust
#define USES_P059 // Encoder
#define USES_P063 // TTP229_KeyPad
#define USES_P073 // 7DG
#define USES_P079 // Wemos Motoshield
#endif
#ifdef CONTROLLER_SET_STABLE
#define USES_C001 // Domoticz HTTP
#define USES_C002 // Domoticz MQTT
#define USES_C003 // Nodo telnet
#define USES_C004 // ThingSpeak
#define USES_C005 // Home Assistant (openHAB) MQTT
#define USES_C006 // PiDome MQTT
#define USES_C007 // Emoncms
#define USES_C008 // Generic HTTP
#define USES_C009 // FHEM HTTP
#define USES_C010 // Generic UDP
#define USES_C013 // ESPEasy P2P network
#endif
#ifdef NOTIFIER_SET_STABLE
#define USES_N001 // Email
#define USES_N002 // Buzzer
#ifdef NOTIFIER_SET_NONE
#undef NOTIFIER_SET_NONE
#endif
#endif
// TESTING #####################################
#ifdef PLUGIN_SET_TESTING
#define USES_P045 // MPU6050
#define USES_P047 // I2C_soil_misture
#define USES_P048 // Motoshield_v2
#define USES_P051 // AM2320
#define USES_P053 // PMSx003
#define USES_P054 // DMX512
#define USES_P055 // Chiming
#define USES_P057 // HT16K33_LED
#define USES_P058 // HT16K33_KeyPad
#define USES_P060 // MCP3221
#define USES_P061 // Keypad
#define USES_P062 // MPR121_KeyPad
#define USES_P064 // APDS9960
#define USES_P065 // DRF0299
#define USES_P066 // VEML6040
#define USES_P067 // HX711_Load_Cell
#define USES_P068 // SHT3x
#define USES_P069 // LM75A
#define USES_P070 // NeoPixel_Clock
#define USES_P071 // Kamstrup401
#define USES_P072 // HDC1080
#define USES_P074 // TSL2561
#define USES_P075 // Nextion
#define USES_P076 // HWL8012 in POW r1
// Needs CSE7766 Energy sensor, via Serial RXD 4800 baud 8E1 (GPIO1), TXD (GPIO3)
#define USES_P077 // CSE7766 in POW R2
#define USES_P078 // Eastron Modbus Energy meters
#define USES_P080 // iButton Sensor DS1990A
#define USES_P081 // Cron
#define USES_P082 // GPS
#define USES_P083 // SGP30
#define USES_P084 // VEML6070
#define USES_P085 // AcuDC24x
#define USES_P086 // Receiving values according Homie convention. Works together with C014 Homie controller
//#define USES_P087 // Serial Proxy
#define USES_P089 // Serial Proxy
#endif
#ifdef CONTROLLER_SET_TESTING
#define USES_C011 // Generic HTTP Advanced
#define USES_C012 // Blynk HTTP
#define USES_C014 // homie 3 & 4dev MQTT
//#define USES_C015 // Blynk
#define USES_C017 // Zabbix
// #define USES_C018 // TTN RN2483
#endif
#ifdef NOTIFIER_SET_TESTING
#endif
// EXPERIMENTAL (playground) #######################
#ifdef PLUGIN_SET_EXPERIMENTAL
#define USES_P046 // VentusW266
#define USES_P050 // TCS34725 RGB Color Sensor with IR filter and White LED
#define USES_P064 // APDS9960 Gesture
#define USES_P077 // CSE7766 Was P134 on Playground
// [copied from Playground as of 6 March 2018]
// It needs some cleanup as some are ALSO in the main repo,
// thus they should have been removed from the Playground repo
#define USES_P100 // SRF01
#define USES_P101 // NeoClock (MERGED?)
#define USES_P102 // Nodo
#define USES_P103 // Event
#define USES_P104 // SRF02
#define USES_P105 // RGBW
#define USES_P106 // IRTX
#define USES_P107 // Email_Demo
#define USES_P108 // WOL
#define USES_P109 // RESOL_DeltaSol_Pro
#define USES_P110 // P1WifiGateway (MERGED?)
#define USES_P111 // RF
//#define USES_P111 // SenseAir (MERGED?)
#define USES_P112 // Power
//#define USES_P112 // RFTX
#define USES_P113 // SI1145
#define USES_P114 // DSM501
//#define USES_P115 // HeatpumpIR - P088 in the main repo.
#define USES_P116 // ID12
#define USES_P117 // LW12FC
//#define USES_P117 // Neopixels
//#define USES_P117 // Nextion
#define USES_P118 // CCS811
#define USES_P119 // BME680
#define USES_P120 // Thermocouple
#define USES_P121 // Candle
#define USES_P122 // NeoPixel (MERGED?)
#define USES_P123 // NeoPixel_Clock (MERGED?)
#define USES_P124 // NeoPixelBusFX
//#define USES_P124 // Ventus_W266_RFM69
#define USES_P125 // ArduCAM
#define USES_P127 // Teleinfo
#define USES_P130 // VEML6075
#define USES_P131 // SHT3X
#define USES_P133 // VL53L0X
#define USES_P141 // LedStrip
#define USES_P142 // RGB-Strip
#define USES_P143 // AnyonePresent
#define USES_P144 // RC-Switch-TX
#define USES_P145 // Itho
#define USES_P149 // MHZ19
#define USES_P150 // SDM120C
#define USES_P151 // CISA
#define USES_P153 // MAX44009
#define USES_P162 // MPL3115A2
#define USES_P163 // DS1631
#define USES_P165 // SerSwitch
#define USES_P166 // WiFiMan
#define USES_P167 // ADS1015
#define USES_P170 // HLW8012
#define USES_P171 // PZEM-004T
#define USES_P180 // Mux
#define USES_P181 // TempHumidity_SHT2x
#define USES_P182 // MT681
#define USES_P199 // RF443_KaKu
#define USES_P202 // ADC_ACcurrentSensor
#define USES_P205 // FrameOLED (MERGED?)
#define USES_P209 // IFTTTMaker
#define USES_P210 // MQTTImport (MERGED?)
#define USES_P211 // MPU6050
#define USES_P212 // MY9291
#define USES_P213 // VEML6070
#endif
#ifdef CONTROLLER_SET_EXPERIMENTAL
//#define USES_C016 // Cache controller
//#define USES_C018 // TTN/RN2483
#endif
#ifdef NOTIFIER_SET_EXPERIMENTAL
#endif
/******************************************************************************\
* Remove incompatible plugins ************************************************
\******************************************************************************/
#ifdef PLUGIN_SET_TEST_ESP32
#undef USES_P010 // BH1750 (doesn't work yet on ESP32)
// #undef USES_P049 // MHZ19 (doesn't work yet on ESP32)
// #undef USES_P052 // SenseAir (doesn't work yet on ESP32)
// #undef USES_P053 // PMSx003
// #undef USES_P056 // SDS011-Dust (doesn't work yet on ESP32)
// #undef USES_P065 // DRF0299
// #undef USES_P071 // Kamstrup401
#undef USES_P075 // Nextion
// #undef USES_P078 // Eastron Modbus Energy meters (doesn't work yet on ESP32)
// #undef USES_P082 // GPS
#ifdef USE_SERVO
#undef USE_SERVO
#endif
#endif
#ifdef ARDUINO_ESP8266_RELEASE_2_3_0
#ifdef USES_P081
#undef USES_P081 // Cron
#endif
#endif
/******************************************************************************\
* Libraries dependencies *****************************************************
\******************************************************************************/
#if defined(USES_P049) || defined(USES_P052) || defined(USES_P053) || defined(USES_P056) || defined(USES_P071) || defined(USES_P075) || defined(USES_P082) || defined(USES_P087)
// At least one plugin uses serial.
#else
// No plugin uses serial, so make sure software serial is not included.
#define DISABLE_SOFTWARE_SERIAL
#endif
/*
#if defined(USES_P00x) || defined(USES_P00y)
#include <the_required_lib.h>
#endif
*/
#if defined(USES_C018)
#define USES_PACKED_RAW_DATA
#endif
#if defined(USES_P085) || defined (USES_P052) || defined(USES_P078)
#define USES_MODBUS
#endif
#if defined(USES_C001) || defined (USES_C002) || defined(USES_P029)
#define USES_DOMOTICZ
#endif
#if defined(USES_C002) || defined (USES_C005) || defined(USES_C006) || defined(USES_C014) || defined(USES_P037)
#define USES_MQTT
#endif
#if defined(USES_C012) || defined (USES_C015)
#define USES_BLYNK
#endif
#ifdef USES_MQTT
// MQTT_MAX_PACKET_SIZE : Maximum packet size
#ifndef MQTT_MAX_PACKET_SIZE
#define MQTT_MAX_PACKET_SIZE 1024 // Is also used in PubSubClient
#endif
#endif //USES_MQTT
// Disable Homie plugin for now in the dev build to make it fit.
#if defined(PLUGIN_BUILD_DEV) && defined(USES_C014)
#undef USES_C014
#endif
// Due to size restrictions, disable a few plugins/controllers for 1M builds
#ifdef SIZE_1M
#ifdef USES_C003
#undef USES_C003
#endif
#endif
// Timing stats page needs timing stats
#if defined(WEBSERVER_TIMINGSTATS) && !defined(USES_TIMING_STATS)
#define USES_TIMING_STATS
#endif
// If timing stats page is not included, there is no need in collecting the stats
#if !defined(WEBSERVER_TIMINGSTATS) && defined(USES_TIMING_STATS)
#undef USES_TIMING_STATS
#endif
#endif // DEFINE_PLUGIN_SETS_H
View Git Blame Copy Permalink