fix #83, update readme.md (#85)

- fix #83, update readme.md (thanks to TonyRiddiough)
- add calculatePageSize(deviceSize) to replace getPageSize(deviceSize) prep.
- update GitHub actions
- minor update examples
- minor edits

.github/workflows/arduino-lint.yml

@@ -6,8 +6,8 @@ jobs:
     runs-on: ubuntu-latest
     timeout-minutes: 5
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
-      - uses: arduino/arduino-lint-action@v1
+      - uses: arduino/arduino-lint-action@v2
         with:
           library-manager: update
           compliance: strict

.github/workflows/arduino_test_runner.yml

@@ -8,7 +8,7 @@ jobs:
     timeout-minutes: 20
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
       - uses: ruby/setup-ruby@v1
         with:
           ruby-version: 2.6

.github/workflows/jsoncheck.yml

@@ -5,13 +5,15 @@ on:
     paths:
       - '**.json'
   pull_request:
+    paths:
+      - '**.json'
 
 jobs:
   test:
     runs-on: ubuntu-latest
     timeout-minutes: 5
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
       - name: json-syntax-check
         uses: limitusus/json-syntax-check@v2
         with:

CHANGELOG.md

@@ -6,10 +6,16 @@ The format is based on [Keep a Changelog](http://keepachangelog.com/)
 and this project adheres to [Semantic Versioning](http://semver.org/).
 
 
+## [1.9.4] - 2025-08-27
+- fix #83, update readme.md (thanks to TonyRiddiough)
+- add calculatePageSize(deviceSize) to replace getPageSize(deviceSize) prep.
+- update GitHub actions
+- minor update examples
+- minor edits
+
 ## [1.9.3] - 2025-08-01
 - update readme.md
 
-
 ## [1.9.2] - 2024-11-25
 - fix #79, wrong default in constructor - kudos to ekinohito
 

I2C_eeprom.cpp

@@ -45,7 +45,7 @@ I2C_eeprom::I2C_eeprom(const uint8_t deviceAddress, const uint32_t deviceSize, T
 {
   _deviceAddress = deviceAddress;
   _deviceSize = setDeviceSize(deviceSize);
-  _pageSize = getPageSize(_deviceSize);
+  _pageSize = calculatePageSize(_deviceSize);
   _wire = wire;
 
   //  Chips 16 Kbit (2048 Bytes) or smaller only have one-word addresses.
@@ -296,7 +296,7 @@ bool I2C_eeprom::updateBlockVerify(const uint16_t memoryAddress, const uint8_t *
 //   24LC01      128 B    YES
 uint32_t I2C_eeprom::determineSize(const bool debug)
 {
-  // try to read a byte to see if connected
+  //  try to read a byte to see if connected
   if (! isConnected()) return 0;
 
   uint8_t patAA = 0xAA;
@@ -308,7 +308,7 @@ uint32_t I2C_eeprom::determineSize(const bool debug)
 
     //  store old values
     bool addressSize = _isAddressSizeTwoWords;
-    _isAddressSizeTwoWords = size > I2C_DEVICESIZE_24LC16;  // 2048
+    _isAddressSizeTwoWords = size > I2C_DEVICESIZE_24LC16;  //  2048
     uint8_t buf = readByte(size);
 
     //  test folding
@@ -338,7 +338,7 @@ uint32_t I2C_eeprom::determineSize(const bool debug)
 //  new 1.8.1 #61
 //  updated 1.8.2 #63
 //
-// Returns:
+//  Returns:
 //  0 if device size cannot be determined or device is not online
 //  1 if device has default bytes in first dataFirstBytes bytes [0-BUFSIZE]
 //      Write some dataFirstBytes to the first bytes and retry or use the determineSize method
@@ -402,14 +402,14 @@ uint32_t I2C_eeprom::determineSizeNoWrite()
     _isAddressSizeTwoWords = (size >= I2C_DEVICESIZE_24LC16);  //  == 2048
 
     //  Try to read last byte of the block, should return length of 0 when fails for single byte devices
-    //  Will return the same dataFirstBytes as initially read on other devices 
+    //  Will return the same dataFirstBytes as initially read on other devices
     //  as the data pointer could not be moved to the requested position
     delay(2);
     uint16_t bSize = readBlock(size, dataMatch, BUFSIZE);
 
     if (bSize == BUFSIZE && memcmp(dataFirstBytes, dataMatch, BUFSIZE) != 0)
     {
-        //  Read is performed just over size (size + BUFSIZE), 
+        //  Read is performed just over size (size + BUFSIZE),
         //  this will only work for devices with mem > size;
         //  therefore return size * 2
         _isAddressSizeTwoWords = addressSize;
@@ -433,7 +433,7 @@ uint8_t I2C_eeprom::getPageSize()
 }
 
 
-uint8_t I2C_eeprom::getPageSize(uint32_t deviceSize)
+uint8_t I2C_eeprom::calculatePageSize(uint32_t deviceSize)
 {
     //  determine page size from device size
     //  based on Microchip 24LCXX data sheets.
@@ -441,8 +441,15 @@ uint8_t I2C_eeprom::getPageSize(uint32_t deviceSize)
     if (deviceSize <= I2C_DEVICESIZE_24LC16) return 16;
     if (deviceSize <= I2C_DEVICESIZE_24LC64) return 32;
     if (deviceSize <= I2C_DEVICESIZE_24LC256) return 64;
-    //  I2C_DEVICESIZE_24LC512
+    if (deviceSize <= I2C_DEVICESIZE_24LC512) return 128;
-    return 128;
+    //  Error.
+    return 0;
+}
+
+
+uint8_t I2C_eeprom::getPageSize(uint32_t deviceSize)
+{
+    return calculatePageSize(deviceSize);
 }
 
 
@@ -469,7 +476,7 @@ uint32_t I2C_eeprom::setDeviceSize(uint32_t deviceSize)
 
 uint8_t I2C_eeprom::setPageSize(uint8_t pageSize)
 {
-  // force power of 2.
+  //  force power of 2.
   if (pageSize >= 128) {
       _pageSize = 128;
   }
@@ -616,7 +623,7 @@ int I2C_eeprom::_WriteBlock(const uint16_t memoryAddress, const uint8_t * buffer
 
   _lastWrite = micros();
 
-  yield();     // For OS scheduling
+  yield();     //  For OS scheduling
 
 //  if (rv != 0)
 //  {
@@ -627,7 +634,7 @@ int I2C_eeprom::_WriteBlock(const uint16_t memoryAddress, const uint8_t * buffer
 //      SPRN("\t");
 //      SPRNL(rv);
 //    }
-//    return -(abs(rv));  // error
+//    return -(abs(rv));  //  error
 //  }
   return rv;
 }
@@ -728,9 +735,9 @@ void I2C_eeprom::_waitEEReady()
   {
     if (isConnected()) return;
     //  TODO remove pre 1.7.4 code
-    // _wire->beginTransmission(_deviceAddress);
+    //  _wire->beginTransmission(_deviceAddress);
-    // int x = _wire->endTransmission();
+    //  int x = _wire->endTransmission();
-    // if (x == 0) return;
+    //  if (x == 0) return;
     yield();     //  For OS scheduling
   }
   return;

I2C_eeprom.h

@@ -2,7 +2,7 @@
 //
 //    FILE: I2C_eeprom.h
 //  AUTHOR: Rob Tillaart
-// VERSION: 1.9.3
+// VERSION: 1.9.4
 // PURPOSE: Arduino Library for external I2C EEPROM 24LC256 et al.
 //     URL: https://github.com/RobTillaart/I2C_EEPROM
 
@@ -11,7 +11,7 @@
 #include "Wire.h"
 
 
-#define I2C_EEPROM_VERSION          (F("1.9.3"))
+#define I2C_EEPROM_VERSION          (F("1.9.4"))
 
 #define I2C_DEVICESIZE_24LC512      65536
 #define I2C_DEVICESIZE_24LC256      32768
@@ -74,17 +74,17 @@ public:
     * It will try to guess page size and address word size based on the size of the device.
     *
     * @param deviceAddress Byte address of the device.
-    * @param deviceSize    Max size in bytes of the device (divide your device size in Kbits by 8)
+    * @param deviceSize    Max size in bytes of the device (divide your device size in Kbits by 8 to get Kbytes)
     * @param wire          Select alternative Wire interface
     */
   I2C_eeprom(const uint8_t deviceAddress, const uint32_t deviceSize, TwoWire *wire = &Wire);
 
-  //  use default I2C pins.
   bool     begin(int8_t writeProtectPin = -1);
   bool     isConnected();
   uint8_t  getAddress();
 
 
+  //  user is responsible that address is in range of the EEPROM used.
   //  writes a byte to memoryAddress
   //  returns I2C status, 0 = OK
   int      writeByte(const uint16_t memoryAddress, const uint8_t value);
@@ -123,11 +123,13 @@ public:
 
 
   //  Meta data functions
-  uint32_t determineSize(const bool debug = false);
-  uint32_t determineSizeNoWrite();
   uint32_t getDeviceSize();
   uint8_t  getPageSize();
+  uint8_t  calculatePageSize(uint32_t deviceSize);
+  [[deprecated("Use calculatePageSize(deviceSize) instead.")]]
   uint8_t  getPageSize(uint32_t deviceSize);
+  uint32_t determineSizeNoWrite();
+  uint32_t determineSize(const bool debug = false);
   uint32_t getLastWrite();
 
 

I2C_eeprom_cyclic_store.h

@@ -5,6 +5,7 @@
 // VERSION: 1.0.0
 // PURPOSE: Supplemental utility class for I2C_EEPROM library
 //
+//     URL: https://github.com/RobTillaart/I2C_EEPROM
 
 
 #include <I2C_eeprom.h>

README.md

@@ -17,34 +17,42 @@ Arduino Library for external I2C EEPROM - 24LC512, 24LC256, 24LC64/32/16/08/04/0
 
 ## Description
 
-This library is to access the external I2C EEPROM up to 64KB (= 512 Kbit) in size.
+This library is used to access an external I2C EEPROM up to 64KB (= 512 Kbit) in size.
-MicroChip 24LC512, 24LC256, 24LC64, 24LC32, 24LC16, 24LC08, 24LC04, 24LC02, 24LC01 and equivalents.
+The MicroChip 24LC512, 24LC256, 24LC64, 24LC32, 24LC16, 24LC08, 24LC04, 24LC02, 24LC01 
+and equivalents are tested and working.
 
 Also confirmed working M24512-W, M24512-R, M24512-DF (See #68). 
-Not supported is the identification page functions.
+Not supported are the identification page functions.
 
 The **I2C_eeprom_cyclic_store** interface is documented [here](README_cyclic_store.md)
 
+**Warning** 
+
+The user is responsible to verify the used memoryAddress (range) exists in the used EEPROM. (read / write / verify functions).
+The library does not check this. If the address is larger than the EEPROM size, 
+the address used will probably be memoryAddress % deviceSize.
+
 
 ### RP2040
 
-There are at least two boards modules for the RP2040 that use a different Wire libraries. 
+There are at least two boards modules for the RP2040 that use different Wire libraries. 
 One from "Earle F. Philhower" and an "MBED" one. See issues #53 and #55 for details.
-
 In 1.7.3 defines are checked to select between these two and as far as tested this seems
 to solve the issue #53 while being backwards compatible.
 If a better solution is found, it will be implemented.
 
 
-### Breaking change
+### Breaking change 1.9.0
 
 Version 1.9.0 fixed a memory leak in **verifyBlock()**.
 
+### Breaking change 1.8.0
+
 Version 1.8.0 introduced a breaking change.
-You cannot set the pins in **begin()** any more.
+You cannot set the I2C pins in **begin()** any more.
-This reduces the dependency of processor dependent Wire implementations.
+This reduces the dependency of processor dependent Wire (I2C) implementations.
 The user has to call **Wire.begin()** and can optionally set the Wire pins 
-before calling **I2C_eeprom.begin()**.
+(if the board supports this), before calling **I2C_eeprom.begin()**.
 
 
 ### Related
@@ -56,6 +64,8 @@ before calling **I2C_eeprom.begin()**.
 
 ## Schematic
 
+Verify the datasheet for your specific EEPROM.
+
 ```cpp
               +---U---+
           A0  | 1   8 |  VCC = 1.7V to 5.5V
@@ -70,7 +80,7 @@ before calling **I2C_eeprom.begin()**.
 
 I2C address = 0x50 .. 0x57 depending on three address lines (A0, A1, A2).
 
-Read the datasheet, section device addressing.
+Read the datasheet of your specific EEPROM, section device addressing.
 
 
 ### I2C multiplexing
@@ -91,7 +101,6 @@ too if they are behind the multiplexer.
 - https://github.com/RobTillaart/TCA9548
 
 
-
 ## Interface
 
 ```cpp
@@ -101,22 +110,46 @@ too if they are behind the multiplexer.
 The interface is kept quite identical to the I2C_24LC1025 library.
 https://github.com/RobTillaart/I2C_24LC1025
 
-Most important difference is 32 bit memory addresses.
+Most important difference is that the latter uses 32 bit memory addresses.
 
 
 ### Constructor
 
-- **I2C_eeprom(uint8_t deviceAddress, TwoWire \*wire = &Wire)** constructor, 
+- **I2C_eeprom(uint8_t deviceAddress, TwoWire \*wire = &Wire)** constructor, to set the 
-optional Wire interface.
+device address and optional Wire interface. The deviceSize == I2C_DEVICESIZE_24LC256 (32KB) 
+is used as it is the most often used I2C_EEPROM size.
+Be aware that if you use other sized EEPROMs you have to use the next constructor,
+and name the deviceSize explicitly, otherwise errors might occur.
 - **I2C_eeprom(uint8_t deviceAddress, uint32_t deviceSize, TwoWire \*wire = &Wire)** 
-constructor, with optional Wire interface.
+constructor, idem as above, furthermore the deviceSize can be any of the defines in the 
-- **bool begin(uint8_t writeProtectPin = -1)** initializes the I2C bus with the default pins.
+table below or its number equivalent.
-Furthermore it checks if the deviceAddress is available on the I2C bus.
+The Wire interface is optional, default Wire.
-Returns true if deviceAddress is found on the bus, false otherwise.
+- **bool begin(uint8_t writeProtectPin = -1)** Optionally one can set the **WP**
-Optionally one can set the **WP** writeProtect pin. (see section below).
+writeProtect pin. (see section below).
 If the **WP** pin is defined, the default behaviour will be to **not** allow writing.
-- **bool isConnected()** test to see if deviceAddress is found on the bus.
+Furthermore it checks if the deviceAddress given in the constructor is available 
+on the defined I2C bus.
+Returns true if deviceAddress is found on the I2C bus, false otherwise.
+- **bool isConnected()** returns true if the address given in the constructor is
+available on the defined I2C bus.
 - **uint8_t getAddress()** returns deviceAddress set in the constructor.
+Convenience.
+
+
+Defined device sizes for constructor, more details see below.
+
+|  Define                  |  bytes  |  Notes  |
+|:-------------------------|--------:|:--------|
+|  I2C_DEVICESIZE_24LC512  |  65536  |
+|  I2C_DEVICESIZE_24LC256  |  32768  |  most used 
+|  I2C_DEVICESIZE_24LC128  |  16384  |
+|  I2C_DEVICESIZE_24LC64   |   8192  |
+|  I2C_DEVICESIZE_24LC32   |   4096  |
+|  I2C_DEVICESIZE_24LC16   |   2048  |
+|  I2C_DEVICESIZE_24LC08   |   1024  |
+|  I2C_DEVICESIZE_24LC04   |    512  |
+|  I2C_DEVICESIZE_24LC02   |    256  |
+|  I2C_DEVICESIZE_24LC01   |    128  |
 
 
 ### Write functions
@@ -134,8 +167,11 @@ Returns I2C status, 0 = OK.
 
 ### Update functions
 
+Using update instead of write functions does not write if the value is the same.
+The price is an extra read() call, but if there is no change the gain is performance.
+
 - **int updateByte(uint16_t memoryAddress, uint8_t value)** write a single byte, 
-but only if changed.
+but only if the value has changed.
 Returns 0 if value was same or write succeeded.
 - **uint16_t updateBlock(uint16_t memoryAddress, uint8_t \* buffer, uint16_t length)** 
 write a buffer starting at the specified memory address, but only if changed.
@@ -148,6 +184,7 @@ Returns bytes actually written <= length.
 - **uint16_t readBlock(uint16_t memoryAddress, uint8_t \* buffer, uint16_t length)** 
 read length bytes into buffer starting at specified memory address.
 Returns the number of bytes read, which should be length.
+The user is responsible that the used buffer can hold length bytes.
 
 
 ### Verify functions
@@ -155,6 +192,7 @@ Returns the number of bytes read, which should be length.
 Since 1.6.0. - experimental, needs extensive testing.
 
 Same as write and update functions above. Returns true if successful, false indicates an error.
+The user is responsible that the used buffer can hold length bytes.
 
 - **bool writeByteVerify(uint16_t memoryAddress, uint8_t value)**
 - **bool writeBlockVerify(uint16_t memoryAddress, uint8_t \* buffer,  uint16_t length)**
@@ -162,23 +200,24 @@ Same as write and update functions above. Returns true if successful, false indi
 - **bool updateByteVerify(uint16_t memoryAddress, uint8_t value)**
 - **bool updateBlockVerify(uint16_t memoryAddress, uint8_t \* buffer, uint16_t length)**
 - **bool verifyBlock(uint16_t memoryAddress, uint8_t \* buffer, uint16_t length)**
-Returns true is buffer equals memoryAddres for length bytes.
+Returns true is buffer equals memoryAddress for length bytes.
 
 
 ### Other
 
-- **uint32_t getDeviceSize()** idem
+- **uint32_t getDeviceSize()** returns the current set deviceSize.
-- **uint8_t  getPageSize()** idem
+- **uint8_t  getPageSize()** returns the current set pageSize.
-- **uint8_t  getPageSize(uint32_t deviceSize)** idem
+- **uint8_t  calculatePageSize(uint32_t deviceSize)** calculates the pageSize of a device
-- **uint32_t getLastWrite()** idem
+with deviceSize. Note it does not set the pageSize!
+- **uint8_t  getPageSize(uint32_t deviceSize)** deprecated, wrapper around calculatePageSize().
+- **uint32_t getLastWrite()** returns timestamp in millis since start of program.
 - **uint32_t determineSizeNoWrite()** function that determines the size of the EEPROM 
 by detecting when a selected memory address is not readable. (new in 1.8.1).
 - **uint32_t determineSize(bool debug = false)**
 function that determines the size of the EEPROM by detecting when a memory address 
 is folded upon memory address 0.
 It is based upon the observation that memory wraps around.
-The debug flag prints some output to Serial.
+The debug flag prints some output to Serial.  
-
 **Warning**: this function has changed (again) in 1.4.0
 
 Test results **determineSize()**
@@ -216,7 +255,7 @@ The function **updateBlock()** reads the block of data and compares it with the
 
 As the function reads/writes the data in blocks with a maximum length of **I2C_TWIBUFFERSIZE** 
 (== 30 AVR limitation; 128 for ESP32) 
-It does this comparison in chunks if the length exceeds this number.
+It does this comparison in chunks if the length exceeds the length of the I2C buffer.
 The result is that an **updateBlock()** call can result e.g. in 4 reads and only 2 writes under the hood.
 
 If data is changed often between writes, **updateBlock()** is slower than **writeBlock()**.
@@ -280,11 +319,12 @@ The library does not offer multiple EEPROMS as one continuous storage device.
 
 #### Should
 
-- investigate multi-EEPROM storage
+- investigate multi-EEPROM storage ==> wrapper class!
-  - wrapper class?
+- improve error handling
-- improve error handling, 
+  - address range check in begin
-  - write functions should return bytes written or so.
+  - write functions should return bytes written (like Print() does)
-- make deviceSize explicit in examples?
+    now they return I2C status... => error / status.
+- remove uint8_t getPageSize(uint32_t deviceSize) in 0.2.0. now deprecated.
 
 #### Could
 
@@ -292,7 +332,8 @@ The library does not offer multiple EEPROMS as one continuous storage device.
   => find first and last changed position could possibly result in less writes.
 - can **setBlock()** use strategies from **updateBlock()**
 - **pageBlock()**: incrBuffer is an implementation name, not a functional name.
-
+- replace defines with const uint8_t / const uint16_t to force type checking?
+- sync order .h file and readme.md.
 
 #### Wont
 

examples/I2C_eeprom_cyclic_store/I2C_eeprom_cyclic_store.ino

@@ -30,7 +30,12 @@ I2C_eeprom_cyclic_store<SampleData> cs;
 void setup()
 {
   Serial.begin(115200);
-  while(!Serial);
+  while (!Serial);  //  wait for Serial port to connect. Needed for Leonardo only
+  Serial.println();
+  Serial.println(__FILE__);
+  Serial.print("I2C_EEPROM_VERSION: ");
+  Serial.println(I2C_EEPROM_VERSION);
+  Serial.println();
 
   Wire.begin();
 
@@ -45,9 +50,9 @@ void setup()
     sprintf(data.message, "Initialized to %x", data.counter);
     cs.write(data);
   }
-
 }
 
+
 void loop()
 {
   Serial.println(data.message);

examples/I2C_eeprom_determineSize/I2C_eeprom_determineSize.ino

@@ -18,9 +18,11 @@ void setup()
 {
   Serial.begin(115200);
   while (!Serial);  //  wait for Serial port to connect. Needed for Leonardo only
+  Serial.println();
   Serial.println(__FILE__);
   Serial.print("I2C_EEPROM_VERSION: ");
   Serial.println(I2C_EEPROM_VERSION);
+  Serial.println();
 
   Wire.begin();
 
@@ -58,7 +60,7 @@ void setup()
   }
 
   Serial.print("PAGE: ");
-  uint8_t pageSize = ee.getPageSize(size);
+  uint8_t pageSize = ee.calculatePageSize(size);
   Serial.print(pageSize);
   Serial.println(" bytes.");
 

examples/I2C_eeprom_determineSizeNoWrite/I2C_eeprom_determineSizeNoWrite.ino

@@ -18,9 +18,11 @@ void setup()
 {
   Serial.begin(115200);
   while (!Serial);  //  wait for Serial port to connect. Needed for Leonardo only
+  Serial.println();
   Serial.println(__FILE__);
   Serial.print("I2C_EEPROM_VERSION: ");
   Serial.println(I2C_EEPROM_VERSION);
+  Serial.println();
 
   Wire.begin();
 
@@ -66,7 +68,7 @@ void setup()
   }
 
   Serial.print("PAGE: ");
-  uint8_t pageSize = ee.getPageSize(size);
+  uint8_t pageSize = ee.calculatePageSize(size);
   Serial.print(pageSize);
   Serial.println(" bytes.");
 

examples/I2C_eeprom_format/I2C_eeprom_format.ino

@@ -18,9 +18,11 @@ void setup()
 {
   Serial.begin(115200);
   while (!Serial);  //  wait for Serial port to connect. Needed for Leonardo only
+  Serial.println();
   Serial.println(__FILE__);
   Serial.print("I2C_EEPROM_VERSION: ");
   Serial.println(I2C_EEPROM_VERSION);
+  Serial.println();
 
   Wire.begin();
 

examples/I2C_eeprom_struct/I2C_eeprom_struct.ino

@@ -6,7 +6,6 @@
 //
 //  uses a 24LC256 (32KB) EEPROM
 //  as this test writes a lot it might wear out EEPROMs eventually.
-//
 
 
 #include "Wire.h"
@@ -29,9 +28,11 @@ void setup()
 {
   Serial.begin(115200);
   while (!Serial);  //  wait for Serial port to connect. Needed for Leonardo only
+  Serial.println();
   Serial.println(__FILE__);
   Serial.print("I2C_EEPROM_VERSION: ");
   Serial.println(I2C_EEPROM_VERSION);
+  Serial.println();
 
   Wire.begin();
 
@@ -39,7 +40,7 @@ void setup()
   if (! ee.isConnected())
   {
     Serial.println("ERROR: Can't find eeprom (stopped)...");
-    // while (1);
+    //  while (1);
   }
 
   Serial.print("size: \t");

examples/I2C_eeprom_test/I2C_eeprom_test.ino

@@ -18,8 +18,7 @@
 // #define SERIAL_OUT SerialUSB
 
 
-I2C_eeprom ee(0x50);
+I2C_eeprom ee(0x50, I2C_DEVICESIZE_24LC256);
-//  I2C_eeprom ee(0x50, I2C_DEVICESIZE_24LC256);
 
 uint32_t start, diff, totals = 0;
 
@@ -28,9 +27,11 @@ void setup()
 {
   SERIAL_OUT.begin(115200);
   while (!SERIAL_OUT);  //  wait for SERIAL_OUT port to connect. Needed for Leonardo only
+  SERIAL_OUT.println();
   SERIAL_OUT.println(__FILE__);
   SERIAL_OUT.print("I2C_EEPROM_VERSION: ");
   SERIAL_OUT.println(I2C_EEPROM_VERSION);
+  SERIAL_OUT.println();
 
   Wire.begin();
 
@@ -68,7 +69,7 @@ void setup()
   ee.setBlock(0, 0, 128);
   dumpEEPROM(0, 128);
   Serial.println("---");
-  // char data[] = "11111111111111111111";
+  //  char data[] = "11111111111111111111";
   char data[] = "33333333333333333333";
   ee.writeBlock(60, (uint8_t*) data, 10);
   dumpEEPROM(0, 128);
@@ -155,7 +156,7 @@ void setup()
   SERIAL_OUT.println(totals);
   totals = 0;
 
-  // same tests but now with a 5 millisec delay in between.
+  //  same tests but now with a 5 millisec delay in between.
   delay(5);
 
   SERIAL_OUT.print("\nTEST: timing writeByte()\t");
@@ -200,7 +201,7 @@ void setup()
   SERIAL_OUT.println(totals);
   totals = 0;
 
-  // does it go well?
+  //  did it go well?
   SERIAL_OUT.println(xx);
 
   SERIAL_OUT.println("\tDone...");
@@ -224,7 +225,7 @@ void dumpEEPROM(uint16_t memoryAddress, uint16_t length)
   }
   SERIAL_OUT.println();
 
-  // block to defined length
+  //  block to defined length
   memoryAddress = memoryAddress / BLOCK_TO_LENGTH * BLOCK_TO_LENGTH;
   length = (length + BLOCK_TO_LENGTH - 1) / BLOCK_TO_LENGTH * BLOCK_TO_LENGTH;
 

examples/I2C_eeprom_test_performance/I2C_eeprom_test_performance.ino

@@ -18,9 +18,11 @@ void setup()
 {
   Serial.begin(115200);
   while (!Serial);  //  wait for Serial port to connect. Needed for Leonardo only
+  Serial.println();
   Serial.println(__FILE__);
   Serial.print("I2C_EEPROM_VERSION: ");
   Serial.println(I2C_EEPROM_VERSION);
+  Serial.println();
 
   Wire.begin();
 
@@ -140,7 +142,7 @@ void test()
   Serial.println(totals);
   totals = 0;
 
-  // does it go well?
+  //  did it go well?
   Serial.println(xx);
 }
 
@@ -157,7 +159,7 @@ void dumpEEPROM(uint16_t memoryAddress, uint16_t length)
   }
   Serial.println();
 
-  // block to defined length
+  //  block to defined length
   memoryAddress = memoryAddress / BLOCK_TO_LENGTH * BLOCK_TO_LENGTH;
   length = (length + BLOCK_TO_LENGTH - 1) / BLOCK_TO_LENGTH * BLOCK_TO_LENGTH;
 

examples/I2C_eeprom_update/I2C_eeprom_update.ino

@@ -20,9 +20,11 @@ void setup()
 {
   Serial.begin(115200);
   while (!Serial);  //  wait for Serial port to connect. Needed for Leonardo only
+  Serial.println();
   Serial.println(__FILE__);
   Serial.print("I2C_EEPROM_VERSION: ");
   Serial.println(I2C_EEPROM_VERSION);
+  Serial.println();
 
   Wire.begin();
 

examples/I2C_eeprom_updateBlock/I2C_eeprom_updateBlock.ino

@@ -23,9 +23,11 @@ void setup()
 {
   Serial.begin(115200);
   while (!Serial);  //  wait for Serial port to connect. Needed for Leonardo only
+  Serial.println();
   Serial.println(__FILE__);
   Serial.print("I2C_EEPROM_VERSION: ");
   Serial.println(I2C_EEPROM_VERSION);
+  Serial.println();
 
   Wire.begin();
 

examples/I2C_eeprom_verify/I2C_eeprom_verify.ino

@@ -21,9 +21,11 @@ void setup()
 {
   Serial.begin(115200);
   while (!Serial);  //  wait for Serial port to connect. Needed for Leonardo only
+  Serial.println();
   Serial.println(__FILE__);
   Serial.print("I2C_EEPROM_VERSION: ");
   Serial.println(I2C_EEPROM_VERSION);
+  Serial.println();
 
   Wire.begin();
 

examples/I2C_eeprom_verifyBlock/I2C_eeprom_verifyBlock.ino

@@ -20,9 +20,11 @@ void setup()
 {
   Serial.begin(115200);
   while (!Serial);  //  wait for Serial port to connect. Needed for Leonardo only
+  Serial.println();
   Serial.println(__FILE__);
   Serial.print("I2C_EEPROM_VERSION: ");
   Serial.println(I2C_EEPROM_VERSION);
+  Serial.println();
 
   Wire.begin();
 
@@ -96,5 +98,4 @@ void disrupt(uint8_t location)
 }
 
 
-
 //  -- END OF FILE --

examples/I2C_small_eeprom_test/I2C_small_eeprom_test.ino

@@ -1,12 +1,13 @@
 //
 //    FILE: I2C_small_eeprom_test.ino
 //  AUTHOR: Tyler Freeman
-// VERSION: 0.1.1
+// VERSION: 0.1.2
 // PURPOSE: show/test I2C_EEPROM library with small EEPROMS
 //     URL: https://github.com/RobTillaart/I2C_EEPROM
 // HISTORY
 // 0.1.0    2014-05-xx initial version
 // 0.1.1    2020-07-14 fix #1 compile for ESP; fix author
+// 0.1.2    2025-08-27 add print filename and version number of library
 
 
 #include <Wire.h>
@@ -101,7 +102,12 @@ void readAndWritePage(unsigned int pageAddress, int bufferLen) {
 void setup()
 {
   SERIAL_DEBUG.begin(57600);
-  while (!SERIAL_DEBUG); // wait for SERIAL_DEBUG port to connect. Needed for Leonardo only
+  while (!SERIAL_DEBUG);  //  wait for SERIAL_DEBUG port to connect. Needed for Leonardo only
+  SERIAL_DEBUG.println();
+  SERIAL_DEBUG.println(__FILE__);
+  SERIAL_DEBUG.print("I2C_EEPROM_VERSION: ");
+  SERIAL_DEBUG.println(I2C_EEPROM_VERSION);
+  SERIAL_DEBUG.println();
 
   SERIAL_DEBUG.println("IT IS BEGINNING");
   SERIAL_DEBUG.println("WAIT FOR IT");
@@ -144,6 +150,6 @@ void setup()
 
 void loop()
 {
-  // Nothing to do during loop
+  //  Nothing to do during loop
 }
 

keywords.txt

@@ -34,6 +34,7 @@ determineSize	KEYWORD2
 determineSizeNoWrite	KEYWORD2
 getDeviceSize	KEYWORD2
 getPageSize	KEYWORD2
+calculatePageSize	KEYWORD2
 getLastWrite	KEYWORD2
 
 setDeviceSize	KEYWORD2

library.json

@@ -15,7 +15,7 @@
     "type": "git",
     "url": "https://github.com/RobTillaart/I2C_EEPROM.git"
   },
-  "version": "1.9.3",
+  "version": "1.9.4",
   "license": "MIT",
   "frameworks": "*",
   "platforms": "*",

library.properties

@@ -1,5 +1,5 @@
 name=I2C_EEPROM
-version=1.9.3
+version=1.9.4
 author=Rob Tillaart <rob.tillaart@gmail.com>
 maintainer=Rob Tillaart <rob.tillaart@gmail.com>
 sentence=Library for I2C EEPROMS