mirror of
https://github.com/Seeed-Studio/Seeed_Arduino_CAN.git
synced 2026-07-27 19:55:59 +00:00
62 lines
1.7 KiB
Arduino
62 lines
1.7 KiB
Arduino
// demo: CAN-BUS Shield, send data
|
|
// Hardware: TWO ArduinoMega with CAN-SHIELDS
|
|
// Run this send_Blink_ROS.ino file on one of the Arduinos
|
|
// Run receive_Blink on the other
|
|
// ***ROS commands to be followe***//
|
|
// roscore
|
|
// rosrun roial_python serial_node.py /dev/ttyACM1 _baud:=57600
|
|
// rostopic pub toggle_led std_msgs/Empty -r 100
|
|
// Jaghvi: jaghvim@andrew.cmu.edu
|
|
|
|
#include <SPI.h>
|
|
#include "mcp2515_can.h"
|
|
//ROS
|
|
#include <ros.h>
|
|
#include <std_msgs/Empty.h>
|
|
|
|
ros::NodeHandle nh;
|
|
|
|
const int SPI_CS_PIN = 9;
|
|
const int ledHIGH = 1;
|
|
const int ledLOW = 0;
|
|
unsigned char stmp[8] = {ledHIGH, 1, 2, 3, ledLOW, 5, 6, 7};
|
|
|
|
mcp2515_can CAN(SPI_CS_PIN); // Set CS pin
|
|
|
|
void messageCb(const std_msgs::Empty& toggle_msg) {
|
|
//digitalWrite(13, HIGH-digitalRead(13)); // blink the led
|
|
// send data: id = 0x00, standrad frame, data len = 8, stmp: data buf
|
|
CAN.sendMsgBuf(0x70, 0, 8, stmp);
|
|
delay(1000); // send data per 100ms
|
|
}
|
|
|
|
ros::Subscriber<std_msgs::Empty> sub("toggle_led", &messageCb);
|
|
|
|
// the cs pin of the version after v1.1 is default to D9
|
|
// v0.9b and v1.0 is default D10
|
|
|
|
|
|
|
|
void setup() {
|
|
SERIAL_PORT_MONITOR.begin(115200);
|
|
nh.initNode();
|
|
nh.subscribe(sub);
|
|
|
|
while (CAN_OK != CAN.begin(CAN_500KBPS)) { // init can bus : baudrate = 500k
|
|
SERIAL_PORT_MONITOR.println("CAN init fail, retry...");
|
|
delay(100);
|
|
}
|
|
SERIAL_PORT_MONITOR.println("CAN init ok!");
|
|
}
|
|
|
|
|
|
void loop() {
|
|
|
|
nh.spinOnce();
|
|
delay(1);
|
|
}
|
|
|
|
/*********************************************************************************************************
|
|
END FILE
|
|
*********************************************************************************************************/
|