mirror of
https://github.com/Seeed-Studio/Seeed_Arduino_CAN.git
synced 2026-07-27 19:55:59 +00:00
113 lines
2.8 KiB
Arduino
113 lines
2.8 KiB
Arduino
/*
|
||
* demo: CAN-BUS Shield, send random id/type/data
|
||
* This code has a little same with linux can-utils 'cangen -mv'
|
||
*
|
||
* Copyright (C) 2020 Seeed Technology Co.,Ltd.
|
||
*/
|
||
#include <SPI.h>
|
||
|
||
#define CAN_2515
|
||
// #define CAN_2518FD
|
||
|
||
// the cs pin of the version after v1.1 is default to D9
|
||
// v0.9b and v1.0 is default D10
|
||
|
||
// Set SPI CS Pin according to your hardware
|
||
// For Wio Terminal w/ MCP2518FD RPi Hat：
|
||
// Channel 0 SPI_CS Pin: BCM 8
|
||
// Channel 1 SPI_CS Pin: BCM 7
|
||
// Interupt Pin: BCM25
|
||
// *****************************************
|
||
// For Arduino MCP2515 Hat:
|
||
// SPI_CS Pin: D9
|
||
|
||
#ifdef CAN_2518FD
|
||
#include "mcp2518fd_can.h"
|
||
const int SPI_CS_PIN = 9;
|
||
const int CAN_INT_PIN = 2;
|
||
mcp2518fd CAN(SPI_CS_PIN); // Set CS pin
|
||
#define MAX_DATA_SIZE 64
|
||
#endif
|
||
|
||
#ifdef CAN_2515
|
||
#include "mcp2515_can.h"
|
||
const int SPI_CS_PIN = 9;
|
||
const int CAN_INT_PIN = 2;
|
||
mcp2515_can CAN(SPI_CS_PIN); // Set CS pin
|
||
#define MAX_DATA_SIZE 8
|
||
#endif
|
||
|
||
void setup() {
|
||
SERIAL_PORT_MONITOR.begin(115200);
|
||
while(!Serial){};
|
||
|
||
#ifdef CAN_2518FD
|
||
while (0 != CAN.begin((byte)CAN_500K_1M)) { // init can bus : baudrate = 500k
|
||
#else
|
||
while (CAN_OK != CAN.begin(CAN_500KBPS)) { // init can bus : baudrate = 500k
|
||
#endif
|
||
SERIAL_PORT_MONITOR.println("CAN init fail, retry...");
|
||
delay(100);
|
||
}
|
||
SERIAL_PORT_MONITOR.println("CAN init ok!");
|
||
|
||
randomSeed(millis());
|
||
}
|
||
|
||
uint32_t id;
|
||
uint8_t type; // bit0: ext, bit1: rtr
|
||
unsigned len;
|
||
byte cdata[MAX_DATA_SIZE] = {0};
|
||
|
||
void loop() {
|
||
type = random(4);
|
||
if (type & 0x1) {
|
||
// total 29 bits
|
||
// Arduino AVR only generate up to 16 bits random number
|
||
id = random(0x1U << 14);
|
||
id |= (uint32_t)random(0x1U << 15) << 14;
|
||
} else {
|
||
id = random(0x1U << 11);
|
||
}
|
||
if (type & 0x2) {
|
||
len = 0;
|
||
// remote frame could also carry data
|
||
// but don't do it.
|
||
// len = random(0, MAX_DATA_SIZE + 1);
|
||
} else {
|
||
len = random(0, MAX_DATA_SIZE + 1);
|
||
}
|
||
|
||
int i;
|
||
for (i = 0; i < len; i++) {
|
||
cdata[i] = random(0x100);
|
||
}
|
||
|
||
CAN.sendMsgBuf(id, bool(type & 0x1),
|
||
bool(type & 0x2),
|
||
len, cdata);
|
||
char prbuf[0x40];
|
||
int n;
|
||
|
||
/* Displayed type:
|
||
*
|
||
* 0x00: standard data frame
|
||
* 0x02: extended data frame
|
||
* 0x30: standard remote frame
|
||
* 0x32: extended remote frame
|
||
*/
|
||
static const byte type2[] = {0x00, 0x02, 0x30, 0x32};
|
||
n = sprintf(prbuf, "TX: [%08lX](%02X) ", (unsigned long)id, type2[type]);
|
||
// n = sprintf(prbuf, "TX: [%08lX](%02X) ", id, type);
|
||
|
||
for (i = 0; i < len; i++) {
|
||
n += sprintf(prbuf + n, "%02X ", cdata[i]);
|
||
}
|
||
SERIAL_PORT_MONITOR.println(prbuf);
|
||
|
||
unsigned d = random(30);
|
||
SERIAL_PORT_MONITOR.println(d);
|
||
delay(d);
|
||
}
|
||
// END FILE
|