diff --git a/examples/graphicstest/graphicstest.pde b/examples/graphicstest/graphicstest.pde
index bf43e76..a3f660c 100644
--- a/examples/graphicstest/graphicstest.pde
+++ b/examples/graphicstest/graphicstest.pde
@@ -45,12 +45,12 @@ Adafruit_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);
 
 void setup(void) {
   Serial.begin(9600);
-  Serial.println("TFT LCD test");
+  progmemPrintln(PSTR("TFT LCD test"));
 
 #ifdef USE_ADAFRUIT_SHIELD_PINOUT
-  Serial.println("Using Adafruit 2.8\" TFT Arduino Shield Pinout");
+  progmemPrintln(PSTR("Using Adafruit 2.8\" TFT Arduino Shield Pinout"));
 #else
-  Serial.println("Using Adafruit 2.8\" TFT Breakout Board Pinout");
+  progmemPrintln(PSTR("Using Adafruit 2.8\" TFT Breakout Board Pinout"));
 #endif
 
   tft.reset();
@@ -58,75 +58,75 @@ void setup(void) {
   uint16_t identifier = tft.readID();
 
   if(identifier == 0x9325) {
-    Serial.println(PSTR("Found ILI9325 LCD driver"));
+    progmemPrintln(PSTR("Found ILI9325 LCD driver"));
   } else if(identifier == 0x9328) {
-    Serial.println(PSTR("Found ILI9328 LCD driver"));
+    progmemPrintln(PSTR("Found ILI9328 LCD driver"));
   } else if(identifier == 0x7575) {
-    Serial.println(PSTR("Found HX8347G LCD driver"));
+    progmemPrintln(PSTR("Found HX8347G LCD driver"));
   } else {
-    Serial.print(PSTR("Unknown LCD driver chip: "));
+    progmemPrint(PSTR("Unknown LCD driver chip: "));
     Serial.println(identifier, HEX);
-    Serial.println(PSTR("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
-    Serial.println(PSTR("  #define USE_ADAFRUIT_SHIELD_PINOUT"));
-    Serial.println(PSTR("should appear in the library header (Adafruit_TFT.h)."));
-    Serial.println(PSTR("If using the breakout board, it should NOT be #defined!"));
-    Serial.println(PSTR("Also if using the breakout, double-check that all wiring"));
-    Serial.println(PSTR("matches the tutorial."));
+    progmemPrintln(PSTR("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
+    progmemPrintln(PSTR("  #define USE_ADAFRUIT_SHIELD_PINOUT"));
+    progmemPrintln(PSTR("should appear in the library header (Adafruit_TFT.h)."));
+    progmemPrintln(PSTR("If using the breakout board, it should NOT be #defined!"));
+    progmemPrintln(PSTR("Also if using the breakout, double-check that all wiring"));
+    progmemPrintln(PSTR("matches the tutorial."));
     return;
   }
 
   tft.begin(identifier);
 
-  Serial.println("Benchmark                Time (microseconds)");
+  progmemPrintln(PSTR("Benchmark                Time (microseconds)"));
 
-  Serial.print("Screen fill              ");
+  progmemPrint(PSTR("Screen fill              "));
   Serial.println(testFillScreen());
   delay(500);
 
-  Serial.print("Text                     ");
+  progmemPrint(PSTR("Text                     "));
   Serial.println(testText());
   delay(3000);
 
-  Serial.print("Lines                    ");
+  progmemPrint(PSTR("Lines                    "));
   Serial.println(testLines(CYAN));
   delay(500);
 
-  Serial.print("Horiz/Vert Lines         ");
+  progmemPrint(PSTR("Horiz/Vert Lines         "));
   Serial.println(testFastLines(RED, BLUE));
   delay(500);
 
-  Serial.print("Rectangles (outline)     ");
+  progmemPrint(PSTR("Rectangles (outline)     "));
   Serial.println(testRects(GREEN));
   delay(500);
 
-  Serial.print("Rectangles (filled)      ");
+  progmemPrint(PSTR("Rectangles (filled)      "));
   Serial.println(testFilledRects(YELLOW, MAGENTA));
   delay(500);
 
-  Serial.print("Circles (filled)         ");
+  progmemPrint(PSTR("Circles (filled)         "));
   Serial.println(testFilledCircles(10, MAGENTA));
 
-  Serial.print("Circles (outline)        ");
+  progmemPrint(PSTR("Circles (outline)        "));
   Serial.println(testCircles(10, WHITE));
   delay(500);
 
-  Serial.print("Triangles (outline)      ");
+  progmemPrint(PSTR("Triangles (outline)      "));
   Serial.println(testTriangles());
   delay(500);
 
-  Serial.print("Triangles (filled)       ");
+  progmemPrint(PSTR("Triangles (filled)       "));
   Serial.println(testFilledTriangles());
   delay(500);
 
-  Serial.print("Rounded rects (outline)  ");
+  progmemPrint(PSTR("Rounded rects (outline)  "));
   Serial.println(testRoundRects());
   delay(500);
 
-  Serial.print("Rounded rects (filled)   ");
+  progmemPrint(PSTR("Rounded rects (filled)   "));
   Serial.println(testFilledRoundRects());
   delay(500);
 
-  Serial.println("Done!");
+  progmemPrintln(PSTR("Done!"));
 }
 
 void loop(void) {
@@ -377,3 +377,17 @@ unsigned long testFilledRoundRects() {
 
   return micros() - start;
 }
+
+// Copy string from flash to serial port
+// Source string MUST be inside a PSTR() declaration!
+void progmemPrint(const char *str) {
+  char c;
+  while(c = pgm_read_byte(str++)) Serial.print(c);
+}
+
+// Same as above, with trailing newline
+void progmemPrintln(const char *str) {
+  progmemPrint(str);
+  Serial.println();
+}
+
diff --git a/examples/rotationtest/rotationtest.pde b/examples/rotationtest/rotationtest.pde
index e62484a..3d067de 100644
--- a/examples/rotationtest/rotationtest.pde
+++ b/examples/rotationtest/rotationtest.pde
@@ -45,12 +45,12 @@ Adafruit_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);
 
 void setup(void) {
   Serial.begin(9600);
-  Serial.println("TFT LCD test");
+  progmemPrintln(PSTR("TFT LCD test"));
 
 #ifdef USE_ADAFRUIT_SHIELD_PINOUT
-  Serial.println("Using Adafruit 2.8\" TFT Arduino Shield Pinout");
+  progmemPrintln(PSTR("Using Adafruit 2.8\" TFT Arduino Shield Pinout"));
 #else
-  Serial.println("Using Adafruit 2.8\" TFT Breakout Board Pinout");
+  progmemPrintln(PSTR("Using Adafruit 2.8\" TFT Breakout Board Pinout"));
 #endif
 
   tft.reset();
@@ -58,20 +58,20 @@ void setup(void) {
   uint16_t identifier = tft.readID();
 
   if(identifier == 0x9325) {
-    Serial.println("Found ILI9325 LCD driver");
+    progmemPrintln(PSTR("Found ILI9325 LCD driver"));
   } else if(identifier == 0x9328) {
-    Serial.println("Found ILI9328 LCD driver");
+    progmemPrintln(PSTR("Found ILI9328 LCD driver"));
   } else if(identifier == 0x7575) {
-    Serial.println("Found HX8347G LCD driver");
+    progmemPrintln(PSTR("Found HX8347G LCD driver"));
   } else {
-    Serial.print("Unknown LCD driver chip: ");
+    progmemPrint(PSTR("Unknown LCD driver chip: "));
     Serial.println(identifier, HEX);
-    Serial.println("If using the Adafruit 2.8\" TFT Arduino shield, the line:");
-    Serial.println("  #define USE_ADAFRUIT_SHIELD_PINOUT");
-    Serial.println("should appear in the library header (Adafruit_TFT.h).");
-    Serial.println("If using the breakout board, it should NOT be #defined!");
-    Serial.println("Also if using the breakout, double-check that all wiring");
-    Serial.println("matches the tutorial.");
+    progmemPrintln(PSTR("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
+    progmemPrintln(PSTR("  #define USE_ADAFRUIT_SHIELD_PINOUT"));
+    progmemPrintln(PSTR("should appear in the library header (Adafruit_TFT.h)."));
+    progmemPrintln(PSTR("If using the breakout board, it should NOT be #defined!"));
+    progmemPrintln(PSTR("Also if using the breakout, double-check that all wiring"));
+    progmemPrintln(PSTR("matches the tutorial."));
     return;
   }
 
@@ -79,8 +79,8 @@ void setup(void) {
 
   tft.fillScreen(BLACK);
 
-  Serial.println("This is a test of the rotation capabilities of the TFT library!");
-  Serial.println("Press <SEND> (or type a character) to advance");
+  progmemPrintln(PSTR("This is a test of the rotation capabilities of the TFT library!"));
+  progmemPrintln(PSTR("Press <SEND> (or type a character) to advance"));
 }
 
 void loop(void) {
@@ -216,3 +216,17 @@ void rotatePixel(void) {
     tft.setRotation(tft.getRotation()+1);
   }
 }
+
+// Copy string from flash to serial port
+// Source string MUST be inside a PSTR() declaration!
+void progmemPrint(const char *str) {
+  char c;
+  while(c = pgm_read_byte(str++)) Serial.print(c);
+}
+
+// Same as above, with trailing newline
+void progmemPrintln(const char *str) {
+  progmemPrint(str);
+  Serial.println();
+}
+
diff --git a/examples/tftbmp/tftbmp.pde b/examples/tftbmp/tftbmp.pde
index 6eb1c4f..8e3ea02 100644
--- a/examples/tftbmp/tftbmp.pde
+++ b/examples/tftbmp/tftbmp.pde
@@ -48,31 +48,31 @@ void setup()
   uint16_t identifier = tft.readID();
 
   if(identifier == 0x9325) {
-    Serial.println(PSTR("Found ILI9325 LCD driver"));
+    progmemPrintln(PSTR("Found ILI9325 LCD driver"));
   } else if(identifier == 0x9328) {
-    Serial.println(PSTR("Found ILI9328 LCD driver"));
+    progmemPrintln(PSTR("Found ILI9328 LCD driver"));
   } else if(identifier == 0x7575) {
-    Serial.println(PSTR("Found HX8347G LCD driver"));
+    progmemPrintln(PSTR("Found HX8347G LCD driver"));
   } else {
-    Serial.print(PSTR("Unknown LCD driver chip: "));
+    progmemPrint(PSTR("Unknown LCD driver chip: "));
     Serial.println(identifier, HEX);
-    Serial.println(PSTR("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
-    Serial.println(PSTR("  #define USE_ADAFRUIT_SHIELD_PINOUT"));
-    Serial.println(PSTR("should appear in the library header (Adafruit_TFT.h)."));
-    Serial.println(PSTR("If using the breakout board, it should NOT be #defined!"));
-    Serial.println(PSTR("Also if using the breakout, double-check that all wiring"));
-    Serial.println(PSTR("matches the tutorial."));
+    progmemPrintln(PSTR("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
+    progmemPrintln(PSTR("  #define USE_ADAFRUIT_SHIELD_PINOUT"));
+    progmemPrintln(PSTR("should appear in the library header (Adafruit_TFT.h)."));
+    progmemPrintln(PSTR("If using the breakout board, it should NOT be #defined!"));
+    progmemPrintln(PSTR("Also if using the breakout, double-check that all wiring"));
+    progmemPrintln(PSTR("matches the tutorial."));
     return;
   }
 
   tft.begin(identifier);
 
-  Serial.print("Initializing SD card...");
+  progmemPrint(PSTR("Initializing SD card..."));
   if (!SD.begin(SD_CS)) {
-    Serial.println("failed!");
+    progmemPrintln(PSTR("failed!"));
     return;
   }
-  Serial.println("OK!");
+  progmemPrintln(PSTR("OK!"));
 
   bmpDraw("woof.bmp", 0, 0);
   delay(1000);
@@ -121,32 +121,32 @@ void bmpDraw(char *filename, int x, int y) {
   if((x >= tft.width()) || (y >= tft.height())) return;
 
   Serial.println();
-  Serial.print("Loading image '");
+  progmemPrint(PSTR("Loading image '"));
   Serial.print(filename);
   Serial.println('\'');
   // Open requested file on SD card
   if ((bmpFile = SD.open(filename)) == NULL) {
-    Serial.print("File not found");
+    progmemPrintln(PSTR("File not found"));
     return;
   }
 
   // Parse BMP header
   if(read16(bmpFile) == 0x4D42) { // BMP signature
-    Serial.print("File size: "); Serial.println(read32(bmpFile));
+    progmemPrint(PSTR("File size: ")); Serial.println(read32(bmpFile));
     (void)read32(bmpFile); // Read & ignore creator bytes
     bmpImageoffset = read32(bmpFile); // Start of image data
-    Serial.print("Image Offset: "); Serial.println(bmpImageoffset, DEC);
+    progmemPrint(PSTR("Image Offset: ")); Serial.println(bmpImageoffset, DEC);
     // Read DIB header
-    Serial.print("Header size: "); Serial.println(read32(bmpFile));
+    progmemPrint(PSTR("Header size: ")); Serial.println(read32(bmpFile));
     bmpWidth  = read32(bmpFile);
     bmpHeight = read32(bmpFile);
     if(read16(bmpFile) == 1) { // # planes -- must be '1'
       bmpDepth = read16(bmpFile); // bits per pixel
-      Serial.print("Bit Depth: "); Serial.println(bmpDepth);
+      progmemPrint(PSTR("Bit Depth: ")); Serial.println(bmpDepth);
       if((bmpDepth == 24) && (read32(bmpFile) == 0)) { // 0 = uncompressed
 
         goodBmp = true; // Supported BMP format -- proceed!
-        Serial.print("Image size: ");
+        progmemPrint(PSTR("Image size: "));
         Serial.print(bmpWidth);
         Serial.print('x');
         Serial.println(bmpHeight);
@@ -210,7 +210,7 @@ void bmpDraw(char *filename, int x, int y) {
         if(lcdidx > 0) {
           tft.pushColors(lcdbuffer, lcdidx, first);
         } 
-        Serial.print("Loaded in ");
+        progmemPrint(PSTR("Loaded in "));
         Serial.print(millis() - startTime);
         Serial.println(" ms");
       } // end goodBmp
@@ -218,7 +218,7 @@ void bmpDraw(char *filename, int x, int y) {
   }
 
   bmpFile.close();
-  if(!goodBmp) Serial.println("BMP format not recognized.");
+  if(!goodBmp) progmemPrintln(PSTR("BMP format not recognized."));
 }
 
 // These read 16- and 32-bit types from the SD card file.
@@ -241,3 +241,16 @@ uint32_t read32(File f) {
   return result;
 }
 
+// Copy string from flash to serial port
+// Source string MUST be inside a PSTR() declaration!
+void progmemPrint(const char *str) {
+  char c;
+  while(c = pgm_read_byte(str++)) Serial.print(c);
+}
+
+// Same as above, with trailing newline
+void progmemPrintln(const char *str) {
+  progmemPrint(str);
+  Serial.println();
+}
+
diff --git a/examples/tftbmp_shield/tftbmp_shield.pde b/examples/tftbmp_shield/tftbmp_shield.pde
index 9ff201c..72815ad 100644
--- a/examples/tftbmp_shield/tftbmp_shield.pde
+++ b/examples/tftbmp_shield/tftbmp_shield.pde
@@ -24,31 +24,31 @@ void setup()
   uint16_t identifier = tft.readID();
 
   if(identifier == 0x9325) {
-    Serial.println(PSTR("Found ILI9325 LCD driver"));
+    progmemPrintln(PSTR("Found ILI9325 LCD driver"));
   } else if(identifier == 0x9328) {
-    Serial.println(PSTR("Found ILI9328 LCD driver"));
+    progmemPrintln(PSTR("Found ILI9328 LCD driver"));
   } else if(identifier == 0x7575) {
-    Serial.println(PSTR("Found HX8347G LCD driver"));
+    progmemPrintln(PSTR("Found HX8347G LCD driver"));
   } else {
-    Serial.print(PSTR("Unknown LCD driver chip: "));
+    progmemPrint(PSTR("Unknown LCD driver chip: "));
     Serial.println(identifier, HEX);
-    Serial.println(PSTR("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
-    Serial.println(PSTR("  #define USE_ADAFRUIT_SHIELD_PINOUT"));
-    Serial.println(PSTR("should appear in the library header (Adafruit_TFT.h)."));
-    Serial.println(PSTR("If using the breakout board, it should NOT be #defined!"));
-    Serial.println(PSTR("Also if using the breakout, double-check that all wiring"));
-    Serial.println(PSTR("matches the tutorial."));
+    progmemPrintln(PSTR("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
+    progmemPrintln(PSTR("  #define USE_ADAFRUIT_SHIELD_PINOUT"));
+    progmemPrintln(PSTR("should appear in the library header (Adafruit_TFT.h)."));
+    progmemPrintln(PSTR("If using the breakout board, it should NOT be #defined!"));
+    progmemPrintln(PSTR("Also if using the breakout, double-check that all wiring"));
+    progmemPrintln(PSTR("matches the tutorial."));
     return;
   }
  
   tft.begin(identifier);
 
-  Serial.print("Initializing SD card...");
+  progmemPrint(PSTR("Initializing SD card..."));
   if (!SD.begin(SD_CS)) {
-    Serial.println("failed!");
+    progmemPrintln(PSTR("failed!"));
     return;
   }
-  Serial.println("OK!");
+  progmemPrintln(PSTR("OK!"));
   spi_save = SPCR;
 
   bmpDraw("woof.bmp", 0, 0);
@@ -109,21 +109,21 @@ void bmpDraw(char *filename, int x, int y) {
 
   // Parse BMP header
   if(read16(bmpFile) == 0x4D42) { // BMP signature
-    Serial.print("File size: "); Serial.println(read32(bmpFile));
+    progmemPrint(PSTR("File size: ")); Serial.println(read32(bmpFile));
     (void)read32(bmpFile); // Read & ignore creator bytes
     bmpImageoffset = read32(bmpFile); // Start of image data
-    Serial.print("Image Offset: "); Serial.println(bmpImageoffset, DEC);
+    progmemPrint(PSTR("Image Offset: ")); Serial.println(bmpImageoffset, DEC);
     // Read DIB header
-    Serial.print("Header size: "); Serial.println(read32(bmpFile));
+    progmemPrint(PSTR("Header size: ")); Serial.println(read32(bmpFile));
     bmpWidth  = read32(bmpFile);
     bmpHeight = read32(bmpFile);
     if(read16(bmpFile) == 1) { // # planes -- must be '1'
       bmpDepth = read16(bmpFile); // bits per pixel
-      Serial.print("Bit Depth: "); Serial.println(bmpDepth);
+      progmemPrint(PSTR("Bit Depth: ")); Serial.println(bmpDepth);
       if((bmpDepth == 24) && (read32(bmpFile) == 0)) { // 0 = uncompressed
 
         goodBmp = true; // Supported BMP format -- proceed!
-        Serial.print("Image size: ");
+        progmemPrint(PSTR("Image size: "));
         Serial.print(bmpWidth);
         Serial.print('x');
         Serial.println(bmpHeight);
@@ -192,7 +192,7 @@ void bmpDraw(char *filename, int x, int y) {
           SPCR = 0;
           tft.pushColors(lcdbuffer, lcdidx, first);
         } 
-        Serial.print("Loaded in ");
+        progmemPrint(PSTR("Loaded in "));
         Serial.print(millis() - startTime);
         Serial.println(" ms");
       } // end goodBmp
@@ -223,3 +223,16 @@ uint32_t read32(File f) {
   return result;
 }
 
+// Copy string from flash to serial port
+// Source string MUST be inside a PSTR() declaration!
+void progmemPrint(const char *str) {
+  char c;
+  while(c = pgm_read_byte(str++)) Serial.print(c);
+}
+
+// Same as above, with trailing newline
+void progmemPrintln(const char *str) {
+  progmemPrint(str);
+  Serial.println();
+}
+
diff --git a/examples/tftpaint/tftpaint.pde b/examples/tftpaint/tftpaint.pde
index 1a80de3..0ec6a53 100644
--- a/examples/tftpaint/tftpaint.pde
+++ b/examples/tftpaint/tftpaint.pde
@@ -60,20 +60,20 @@ int oldcolor, currentcolor;
 
 void setup(void) {
   Serial.begin(9600);
-  Serial.println("Paint!");
+  progmemPrintln(PSTR("Paint!"));
   
   tft.reset();
   
   uint16_t identifier = tft.readID();
 
   if(identifier == 0x9325) {
-    Serial.println("Found ILI9325 LCD driver");
+    progmemPrintln(PSTR("Found ILI9325 LCD driver"));
   } else if(identifier == 0x9328) {
-    Serial.println("Found ILI9328 LCD driver");
+    progmemPrintln(PSTR("Found ILI9328 LCD driver"));
   } else if(identifier == 0x7575) {
-    Serial.println("Found HX8347G LCD driver");
+    progmemPrintln(PSTR("Found HX8347G LCD driver"));
   } else {
-    Serial.print("Unknown LCD driver chip: ");
+    progmemPrint(PSTR("Unknown LCD driver chip: "));
     Serial.println(identifier, HEX);
     return;
   }
@@ -171,3 +171,17 @@ void loop()
     }
   }
 }
+
+// Copy string from flash to serial port
+// Source string MUST be inside a PSTR() declaration!
+void progmemPrint(const char *str) {
+  char c;
+  while(c = pgm_read_byte(str++)) Serial.print(c);
+}
+
+// Same as above, with trailing newline
+void progmemPrintln(const char *str) {
+  progmemPrint(str);
+  Serial.println();
+}
+
diff --git a/examples/tftpaint_shield/tftpaint_shield.pde b/examples/tftpaint_shield/tftpaint_shield.pde
index 74f482c..5287ce9 100644
--- a/examples/tftpaint_shield/tftpaint_shield.pde
+++ b/examples/tftpaint_shield/tftpaint_shield.pde
@@ -49,20 +49,20 @@ int oldcolor, currentcolor;
 
 void setup(void) {
   Serial.begin(9600);
-  Serial.println("Paint!");
+  progmemPrintln(PSTR("Paint!"));
 
   tft.reset();
 
   uint16_t identifier = tft.readID();
 
   if(identifier == 0x9325) {
-    Serial.println("Found ILI9325 LCD driver");
+    progmemPrintln(PSTR("Found ILI9325 LCD driver"));
   } else if(identifier == 0x9328) {
-    Serial.println("Found ILI9328 LCD driver");
+    progmemPrintln(PSTR("Found ILI9328 LCD driver"));
   } else if(identifier == 0x7575) {
-    Serial.println("Found HX8347G LCD driver");
+    progmemPrintln(PSTR("Found HX8347G LCD driver"));
   } else {
-    Serial.print("Unknown LCD driver chip: ");
+    progmemPrint(PSTR("Unknown LCD driver chip: "));
     Serial.println(identifier, HEX);
     return;
   }
@@ -160,3 +160,17 @@ void loop()
     }
   }
 }
+
+// Copy string from flash to serial port
+// Source string MUST be inside a PSTR() declaration!
+void progmemPrint(const char *str) {
+  char c;
+  while(c = pgm_read_byte(str++)) Serial.print(c);
+}
+
+// Same as above, with trailing newline
+void progmemPrintln(const char *str) {
+  progmemPrint(str);
+  Serial.println();
+}
+
diff --git a/examples/tftpaintshield/tftpaintshield.pde b/examples/tftpaintshield/tftpaintshield.pde
deleted file mode 100644
index 143cbf4..0000000
--- a/examples/tftpaintshield/tftpaintshield.pde
+++ /dev/null
@@ -1,164 +0,0 @@
-#include <Adafruit_GFX.h>    // Core graphics library
-#include <Adafruit_TFTLCD.h> // Hardware-specific library
-#include <TouchScreen.h>
-
-#if not defined USE_ADAFRUIT_SHIELD_PINOUT 
- #error "For use with the shield, make sure to #define USE_ADAFRUIT_SHIELD_PINOUT in the TFTLCD.h library file"
-#endif
-
-// These are the pins for the shield!
-#define YP A1  // must be an analog pin, use "An" notation!
-#define XM A2  // must be an analog pin, use "An" notation!
-#define YM 7   // can be a digital pin
-#define XP 6   // can be a digital pin
-
-#define TS_MINX 150
-#define TS_MINY 120
-#define TS_MAXX 920
-#define TS_MAXY 940
-
-// For better pressure precision, we need to know the resistance
-// between X+ and X- Use any multimeter to read it
-// For the one we're using, its 300 ohms across the X plate
-TouchScreen ts = TouchScreen(XP, YP, XM, YM, 300);
-
-#define LCD_CS A3
-#define LCD_CD A2
-#define LCD_WR A1
-#define LCD_RD A0 
-
-// Color definitions
-#define	BLACK           0x0000
-#define	BLUE            0x001F
-#define	RED             0xF800
-#define	GREEN           0x07E0
-#define CYAN            0x07FF
-#define MAGENTA         0xF81F
-#define YELLOW          0xFFE0 
-#define WHITE           0xFFFF
-
-
-Adafruit_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, 0);
-
-#define BOXSIZE 40
-#define PENRADIUS 4
-int oldcolor, currentcolor;
-
-void setup(void) {
-  Serial.begin(9600);
-  Serial.println("Paint!");
-  
-  tft.reset();
-  
-  uint16_t identifier = tft.readRegister(0x0);
-  if (identifier == 0x9325) {
-    Serial.println("Found ILI9325");
-  } else if (identifier == 0x9328) {
-    Serial.println("Found ILI9328");
-  } else if (identifier == 0x7575) {
-    Serial.println("Found HX8347G");
-  } else {
-    Serial.print("Unknown driver chip ");
-    Serial.println(identifier, HEX);
-    while (1);
-  }
-
-  tft.begin(identifier); 
-  tft.fillScreen(BLACK);
-  
-  tft.fillRect(0, 0, BOXSIZE, BOXSIZE, RED);
-  tft.fillRect(BOXSIZE, 0, BOXSIZE, BOXSIZE, YELLOW);
-  tft.fillRect(BOXSIZE*2, 0, BOXSIZE, BOXSIZE, GREEN);
-  tft.fillRect(BOXSIZE*3, 0, BOXSIZE, BOXSIZE, CYAN);
-  tft.fillRect(BOXSIZE*4, 0, BOXSIZE, BOXSIZE, BLUE);
-  tft.fillRect(BOXSIZE*5, 0, BOXSIZE, BOXSIZE, MAGENTA);
- // tft.fillRect(BOXSIZE*6, 0, BOXSIZE, BOXSIZE, WHITE);
- 
- tft.drawRect(0, 0, BOXSIZE, BOXSIZE, WHITE);
- currentcolor = RED;
- 
-  pinMode(13, OUTPUT);
-}
-
-#define MINPRESSURE 10
-#define MAXPRESSURE 1000
-
-void loop()
-{
-  digitalWrite(13, HIGH);
-  Point p = ts.getPoint();
-  digitalWrite(13, LOW);
-
-  // if you're sharing pins, you'll need to fix the directions of the touchscreen pins!
-  //pinMode(XP, OUTPUT);
-  pinMode(XM, OUTPUT);
-  pinMode(YP, OUTPUT);
-  //pinMode(YM, OUTPUT);
-
-  // we have some minimum pressure we consider 'valid'
-  // pressure of 0 means no pressing!
-
-  if (p.z > MINPRESSURE && p.z < MAXPRESSURE) {
-    /*
-    Serial.print("X = "); Serial.print(p.x);
-    Serial.print("\tY = "); Serial.print(p.y);
-    Serial.print("\tPressure = "); Serial.println(p.z);
-    */
-    
-    if (p.y < (TS_MINY-5)) {
-      Serial.println("erase");
-     // press the bottom of the screen to erase 
-      tft.fillRect(0, BOXSIZE, tft.width(), tft.height()-BOXSIZE, BLACK);
-      
-    }
-    // turn from 0->1023 to tft.width
-    p.x = map(p.x, TS_MINX, TS_MAXX, tft.width(), 0);
-    p.y = map(p.y, TS_MINY, TS_MAXY, tft.height(), 0);
-    /*
-    Serial.print("("); Serial.print(p.x);
-    Serial.print(", "); Serial.print(p.y);
-    Serial.println(")");
-    */
-    if (p.y < BOXSIZE) {
-       oldcolor = currentcolor;
- 
-  
-       if (p.x < BOXSIZE) { 
-         currentcolor = RED; 
-         tft.drawRect(0, 0, BOXSIZE, BOXSIZE, WHITE);
-       } 
-       else if (p.x < BOXSIZE*2) {
-         currentcolor = YELLOW; 
-         tft.drawRect(BOXSIZE, 0, BOXSIZE, BOXSIZE, WHITE);
-       }
-       else if (p.x < BOXSIZE*3) {
-         currentcolor = GREEN; 
-         tft.drawRect(BOXSIZE*2, 0, BOXSIZE, BOXSIZE, WHITE);
-       }
-       else if (p.x < BOXSIZE*4) {
-         currentcolor = CYAN; 
-         tft.drawRect(BOXSIZE*3, 0, BOXSIZE, BOXSIZE, WHITE);
-       }
-       else if (p.x < BOXSIZE*5) {
-         currentcolor = BLUE; 
-         tft.drawRect(BOXSIZE*4, 0, BOXSIZE, BOXSIZE, WHITE);
-       }
-       else if (p.x < BOXSIZE*6) {
-         currentcolor = MAGENTA; 
-         tft.drawRect(BOXSIZE*5, 0, BOXSIZE, BOXSIZE, WHITE);
-       }
-       
-       if (oldcolor != currentcolor) {
-          if (oldcolor == RED) tft.fillRect(0, 0, BOXSIZE, BOXSIZE, RED);
-          if (oldcolor == YELLOW) tft.fillRect(BOXSIZE, 0, BOXSIZE, BOXSIZE, YELLOW);
-          if (oldcolor == GREEN) tft.fillRect(BOXSIZE*2, 0, BOXSIZE, BOXSIZE, GREEN);
-          if (oldcolor == CYAN) tft.fillRect(BOXSIZE*3, 0, BOXSIZE, BOXSIZE, CYAN);
-          if (oldcolor == BLUE) tft.fillRect(BOXSIZE*4, 0, BOXSIZE, BOXSIZE, BLUE);
-          if (oldcolor == MAGENTA) tft.fillRect(BOXSIZE*5, 0, BOXSIZE, BOXSIZE, MAGENTA);
-       }
-    }
-    if (((p.y-PENRADIUS) > BOXSIZE) && ((p.y+PENRADIUS) < tft.height())) {
-      tft.fillCircle(p.x, p.y, PENRADIUS, currentcolor);
-    }
-  }
-}