Michel2/Tasmota
1
0
Fork 0
mirror of https://github.com/arendst/Tasmota.git synced 2026-07-28 04:15:53 +00:00
Code Issues Releases Activity
Files
development
Tasmota/tasmota/language/zh_TW.h
T

1355 lines
55 KiB
C
Raw Permalink Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
/*
zh-TW.h - localization for Chinese (Traditional) - Taiwan for Tasmota
Copyright (C) 2021 Dannydu
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _LANGUAGE_ZH_TW_H_
#define _LANGUAGE_ZH_TW_H_
/*************************** ATTENTION *******************************\
*
* Due to memory constraints only UTF-8 is supported.
* To save code space keep text as short as possible.
* Time and Date provided by SDK can not be localized (yet).
* Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
* Use online command Prefix to translate cmnd, stat and tele.
*
* Updated until v9.3.1.1
\*********************************************************************/
//#define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
#define LANGUAGE_LCID 1028
// HTML (ISO 639-1) Language Code
#define D_HTML_LANGUAGE "zh-Hant-TW"
// "2017-03-07T11:08:02" - ISO8601:2004
#define D_YEAR_MONTH_SEPARATOR "-"
#define D_MONTH_DAY_SEPARATOR "-"
#define D_DATE_TIME_SEPARATOR "T"
#define D_HOUR_MINUTE_SEPARATOR ":"
#define D_MINUTE_SECOND_SEPARATOR ":"
#define D_DAY3LIST "日 一 二 三 四 五 六 "
#define D_MONTH3LIST "1月 2月 3月 4月 5月 6月 7月 8月 9月 10月11月12月"
// Non JSON decimal separator
#define D_DECIMAL_SEPARATOR "."
// Common
#define D_ABSOLUTE_HUMIDITY "絕對濕度"
#define D_ADDRESS "地址"
#define D_ADMIN "管理"
#define D_AIR_QUALITY "空氣品質"
#define D_AP "存取點 " // Access Point, added space to append numbers in code
#define D_AS "名稱：" // as
#define D_AT "at" // at (Used for memory addresses)
#define D_AUTO "自動"
#define D_AUTO_UPDATE "自動更新"
#define D_BATT "電池" // Short for Battery
#define D_BATTERY "電池"
#define D_BATTERY_CHARGE "充電" // Battery charge in %
#define D_BLINK "閃爍"
#define D_BLINKOFF "閃爍關"
#define D_BOOT_COUNT "啟動次數"
#define D_BRIGHTLIGHT "亮度"
#define D_BSSID "BSSId" // Basic Service Set Identifier (kept intact)
#define D_BUTTON "按鈕 " // Added space to append numbers in code
#define D_BY "由" // Written by me
#define D_BYTES "大小："
#define D_CELSIUS "攝氏"
#define D_CHANNEL "頻道 " // Added space to append numbers in code
#define D_CO2 "二氧化碳"
#define D_CODE "代碼" // Button code
#define D_COLDLIGHT "冷光"
#define D_COLOR "色彩"
#define D_COMMAND "命令："
#define D_CONNECTED "已連線"
#define D_CORS_DOMAIN "跨來源資源共享的網域（CORS Domain）"
#define D_COUNT "數量："
#define D_COUNTER "計數器 " // Added space to append numbers in code
#define D_CT_POWER "CT 功率"
#define D_CURRENT "電流" // As in Voltage and Current
#define D_CURRENT_NEUTRAL "中性電流"
#define D_DARKLIGHT "暗光"
#define D_DATA "資料："
#define D_DEBUG "除錯"
#define D_DEWPOINT "露點"
#define D_DISABLED "已停用"
#define D_DISCONNECTED "已斷線"
#define D_DISTANCE "距離"
#define D_DNS_SERVER "DNS 伺服器 " // Added space to append numbers in code
#define D_DO "溶氧量"
#define D_DONE "完成"
#define D_DST_TIME "日光節約時間"
#define D_EC "EC" // Electrical Conductivity (kept intact)
#define D_ECO2 "eCO₂" // equivalent CO2 (kept intact)
#define D_EMULATION "模擬"
#define D_ENABLED "已啟用"
#define D_ERASE "抹除"
#define D_ERROR "錯誤"
#define D_FAHRENHEIT "華氏"
#define D_FAILED "失敗"
#define D_FALLBACK "後備"
#define D_FALLBACK_TOPIC "後備主題"
#define D_FALSE "假"
#define D_FILE "檔案："
#define D_FILE_SYSTEM_SIZE "檔案系統大小"
#define D_FLOW_RATE "流量"
#define D_FRAGMENTATION "frag." // Lower case abbreviated version of fragmentation used in "memory fragmentation"
#define D_FRAME_RATE "幀率"
#define D_FREE_MEMORY "可用的記憶體"
#define D_FREQUENCY "頻率"
#define D_GAS "氣體"
#define D_GATEWAY "閘道器"
#define D_GROUP "群組："
#define D_HALL_EFFECT "霍爾效應"
#define D_HCHO "Formaldehyde"
#define D_HEATINDEX "酷熱指數"
#define D_HOST "主機"
#define D_HOSTNAME "主機名稱"
#define D_HUMIDITY "濕度"
#define D_ILLUMINANCE "照度"
#define D_IMMEDIATE "立即" // Button immediate
#define D_INDEX "索引："
#define D_INFO "資訊"
#define D_INFRARED "紅外線"
#define D_INITIALIZED "已初始化"
#define D_IP_ADDRESS "IP 位址"
#define D_LIGHT "燈光"
#define D_LQI "LQI" // Zigbee Link Quality Index (kept intact)
#define D_LWT "LWT" // Last Will and Testament (kept intact)
#define D_MODULE "模組"
#define D_MOISTURE "濕度"
#define D_MQ "MQ" // Message Queue (kept intact)
#define D_MQTT "MQTT" // Message Queuing Telemetry Transport (kept intact)
#define D_MULTI_PRESS "多重點擊"
#define D_NOISE "雜訊"
#define D_NONE "無"
#define D_NOX "NOx" // Nitrogen Oxides (kept intact)
#define D_O2 "氧氣"
#define D_OFF "關閉"
#define D_OFFLINE "離線"
#define D_OK "確定"
#define D_ON "開啟"
#define D_ONLINE "線上"
#define D_ORP "ORP" // Oxidation-Reduction Potential (kept intact)
#define D_PARTITION "分割區" // As in flash and firmware partition
#define D_PASSWORD "密碼"
#define D_PH "pH" // potential of Hydrogen (kept intact)
#define D_PORT "通訊埠"
#define D_POWER_FACTOR "功率因數"
#define D_POWERUSAGE "用電量"
#define D_POWERUSAGE_ACTIVE "實功率"
#define D_POWERUSAGE_ACTIVE_TOTAL "總實功率"
#define D_POWERUSAGE_APPARENT "視在功率"
#define D_POWERUSAGE_REACTIVE "虛功率"
#define D_PRESSURE "氣壓"
#define D_PRESSUREATSEALEVEL "海平面氣壓"
#define D_PROGRAM_FLASH_SIZE "程式記憶體大小"
#define D_PROGRAM_SIZE "程式大小"
#define D_PROJECT "專案"
#define D_PSR_FREE_MEMORY "PS-RAM 可用空間"
#define D_PSR_MAX_MEMORY "PS-RAM 容量"
#define D_RAIN "雨"
#define D_RANGE "範圍"
#define D_RECEIVED "已接收"
#define D_RESTART "重新啟動"
#define D_RESTART_REASON "重新啟動原因"
#define D_RESTARTING "正在重新啟動"
#define D_RETAINED "已保留"
#define D_RULE "規則"
#define D_SAVE "儲存"
#define D_SENSOR "感應器"
#define D_SOC "充電狀態"
#define D_SOH "健康狀態"
#define D_SSID "SSID" // Service Set Identifier (kept intact)
#define D_START "啟動"
#define D_STD_TIME "標準時間"
#define D_STOP "停止"
#define D_SUBNET_MASK "子網域遮罩"
#define D_SUBSCRIBE_TO "訂閱"
#define D_SUCCESSFUL "已成功"
#define D_SUNRISE "日出"
#define D_SUNSET "日落"
#define D_TEMPERATURE "溫度"
#define D_TIME_OF_DAY "時間"
#define D_TO "到"
#define D_TOGGLE "切換"
#define D_TOPIC "主題"
#define D_TOTAL_USAGE "總使用量"
#define D_TRANSMIT "發送"
#define D_TRUE "真"
#define D_TVOC "TVOC" // Total Volatile Organic Compounds (kept intact)
#define D_TWILIGHT_ASTRONOMICAL "天文"
#define D_TWILIGHT_CIVIL "民用"
#define D_TWILIGHT_NAUTICAL "航海"
#define D_UNSUBSCRIBE_FROM "取消訂閱"
#define D_UPLOAD "上傳"
#define D_UPTIME "啟動時間"
#define D_USED "已使用"
#define D_USER "使用者名稱"
#define D_UTC_TIME "世界協調時間（UTC）"
#define D_UV_INDEX "紫外線指數"
#define D_UV_INDEX_1 "低"
#define D_UV_INDEX_2 "中"
#define D_UV_INDEX_3 "高"
#define D_UV_INDEX_4 "危險"
#define D_UV_INDEX_5 "曬傷風險 L1/2"
#define D_UV_INDEX_6 "曬傷風險 L3"
#define D_UV_INDEX_7 "超出範圍" // Out of Range
#define D_UV_LEVEL "紫外線等級"
#define D_UV_POWER "紫外線能量"
#define D_VERSION "版本"
#define D_VOC "VOC" // Volatile Organic Compounds (kept intact)
#define D_VOLTAGE "電壓"
#define D_VOLUME "體積"
#define D_WARMLIGHT "暖光"
#define D_WATER_DEPTH "水深"
#define D_WEB_SERVER "網頁伺服器"
#define D_WEIGHT "重量"
// tasmota.ino
#define D_WARNING_MINIMAL_VERSION "警告：這個版本無法永久儲存設定！"
#define D_LEVEL_10 "等級 1-0"
#define D_LEVEL_01 "等級 0-1"
#define D_SERIAL_LOGGING_DISABLED "已停用序列埠日誌"
#define D_SYSLOG_LOGGING_REENABLED "系統日誌已經重新啟用"
#define D_SET_BAUDRATE_TO "將鮑率設定為："
#define D_RECEIVED_TOPIC "接收到的主題："
#define D_DATA_SIZE "資料大小："
#define D_ANALOG_INPUT "類比 " // Added space to append numbers in code
// support.ino
#define D_OSWATCH "osWatch" // kept intact
#define D_BLOCKED_LOOP "Blocked Loop" // kept intact
#define D_WPS_FAILED_WITH_STATUS "WPS 設定失敗，狀態碼："
#define D_ACTIVE_FOR_3_MINUTES "啟動三分鐘"
#define D_FAILED_TO_START "無法啟動"
#define D_PATCH_ISSUE_2186 "Patch issue 2186"
#define D_CONNECTING_TO_AP "正在連線至存取點"
#define D_IN_MODE "模式："
#define D_CONNECT_FAILED_NO_IP_ADDRESS "連線失敗：未收到 IP 位址"
#define D_CONNECT_FAILED_AP_NOT_REACHED "連線失敗：無法連線至存取點"
#define D_CONNECT_FAILED_WRONG_PASSWORD "連線失敗：密碼錯誤"
#define D_CONNECT_FAILED_AP_TIMEOUT "連線失敗：存取點超時"
#define D_ATTEMPTING_CONNECTION "正在試圖連線…"
#define D_CHECKING_CONNECTION "正在檢查連線…"
#define D_QUERY_DONE "已完成查詢，找到 MQTT 服務了"
#define D_MQTT_SERVICE_FOUND "MQTT 服務位於："
#define D_FOUND_AT "位於"
#define D_SYSLOG_HOST_NOT_FOUND "找不到系統日誌主機"
// settings.ino
#define D_SAVED_TO_FLASH_AT "儲存至快閃記憶體，位於："
#define D_LOADED_FROM_FLASH_AT "已從快閃記憶體中讀取，位置："
#define D_USE_DEFAULTS "使用預設值"
#define D_ERASED_SECTOR "抹除磁區"
// xdrv_02_webserver.ino
#define D_NOSCRIPT "請啟用 JavaScript 以使用 Tasmota"
#define D_SAFEBOOT "SAFEBOOT"
#define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "MINIMAL 版韌體<br>請升級"
#define D_WEBSERVER_ACTIVE_ON "網頁伺服器已經啟動，位於："
#define D_WITH_IP_ADDRESS "IP 位址："
#define D_WEBSERVER_STOPPED "網頁伺服器已經停止"
#define D_FILE_NOT_FOUND "找不到檔案"
#define D_REDIRECTED "已重新導向至認證頁面"
#define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wifimanager 設定 AccessPoint 並保留 Station"
#define D_WIFIMANAGER_SET_ACCESSPOINT "Wifimanager 設定 AccessPoint"
#define D_TRYING_TO_CONNECT "正在將裝置連線至網路"
#define D_RESTART_IN "重新啟動倒數 "
#define D_SECONDS " 秒"
#define D_DEVICE_WILL_RESTART "裝置將會在幾秒內重新啟動"
#define D_BUTTON_TOGGLE "切換"
#define D_CONFIGURATION "設定"
#define D_INFORMATION "資訊"
#define D_FIRMWARE_UPGRADE "韌體升級"
#define D_MANAGEMENT "工具"
#define D_GPIO_VIEWER "GPIO 檢視器"
#define D_CONSOLE "控制台"
#define D_CONFIRM_RESTART "確認重新啟動"
#define D_CONFIGURE_MODULE "模組設定"
#define D_CONFIGURE_WIFI "Wi-Fi 設定"
#define D_CONFIGURE_MQTT "MQTT 設定"
#define D_CONFIGURE_DOMOTICZ "Domoticz 設定"
#define D_CONFIGURE_LOGGING "日誌設定"
#define D_CONFIGURE_OTHER "其他設定"
#define D_CONFIRM_RESET_CONFIGURATION "請確認是否要重設設定"
#define D_RESET_CONFIGURATION "重設設定"
#define D_BACKUP_CONFIGURATION "備份設定"
#define D_RESTORE_CONFIGURATION "還原設定"
#define D_START_RESTORE "開始還原"
#define D_MAIN_MENU "主選單"
#define D_MODULE_PARAMETERS "模組參數"
#define D_MODULE_TYPE "模組類型"
#define D_PULLUP_ENABLE "無按鈕/上拉式開關"
#define D_ADC "類比轉數位"
#define D_GPIO "GPIO"
#define D_SERIAL_IN "序列埠輸入"
#define D_SERIAL_OUT "序列埠輸出"
#define D_WIFI_PARAMETERS "Wi-Fi 設定"
#define D_SCAN_FOR_WIFI_NETWORKS "掃描無線網路"
#define D_SCAN_DONE "掃描完畢"
#define D_NO_NETWORKS_FOUND "找不到任何網路"
#define D_REFRESH_TO_SCAN_AGAIN "重新整理以重新掃描"
#define D_DUPLICATE_ACCESSPOINT "重覆的存取點"
#define D_SKIPPING_LOW_QUALITY "正在忽略訊號品質不佳的訊號"
#define D_MODE "模式"
#define D_RSSI "RSSI"
#define D_WEP "WEP"
#define D_WPA_PSK "WPA PSK"
#define D_WPA2_PSK "WPA2 PSK"
#define D_AP1_SSID "存取點 1 的 SSID"
#define D_AP1_SSID_HELP "輸入或選擇您的 Wi-Fi 網路名稱"
#define D_AP2_SSID "存取點 2 的 SSID"
#define D_AP2_SSID_HELP "輸入您的備用 Wi-Fi 網路名稱"
#define D_AP_PASSWORD "Wi-Fi 密碼"
#define D_AP_PASSWORD_HELP "輸入您的 Wi-Fi 密碼"
#define D_SELECT_YOUR_WIFI_NETWORK "選擇您的 Wi-Fi 網路"
#define D_SHOW_MORE_WIFI_NETWORKS "掃描所有 Wi-Fi 網路"
#define D_SHOW_MORE_OPTIONS "更多選項"
#define D_CHECK_CREDENTIALS "請檢查密碼是否正確"
#define D_SUCCESSFUL_WIFI_CONNECTION "Wi-Fi 連線成功"
#define D_NOW_YOU_CAN_CLOSE_THIS_WINDOW "您現在可以關閉此視窗"
#define D_REDIRECTING_TO_NEW_IP "正在重新導向至新的 IP 位址"
#define D_MQTT_PARAMETERS "MQTT 設定"
#define D_CLIENT "客戶端"
#define D_FULL_TOPIC "完整主題"
#define D_LOGGING_PARAMETERS "日誌參數"
#define D_SERIAL_LOG_LEVEL "序列埠日誌等級"
#define D_MQTT_LOG_LEVEL "Mqtt 日誌等級"
#define D_WEB_LOG_LEVEL "Web 日誌等級"
#define D_SYS_LOG_LEVEL "Syslog 日誌等級"
#define D_MORE_DEBUG "更多除錯資訊"
#define D_SYSLOG_HOST "Syslog 主機位址"
#define D_SYSLOG_PORT "Syslog 通訊埠"
#define D_TELEMETRY_PERIOD "遙測週期"
#define D_OTHER_PARAMETERS "其他參數"
#define D_TEMPLATE "範本"
#define D_TEMPLATE_WRONG_ARCH "Reset to correct chip type"
#define D_ACTIVATE "啟動"
#define D_DEVICE_NAME "裝置名稱"
#define D_WEB_ADMIN_PASSWORD "網頁管理密碼"
#define D_MQTT_ENABLE "啟用 MQTT"
#define D_MQTT_TLS_ENABLE "MQTT TLS"
#define D_HTTP_API "HTTP API"
#define D_HTTP_API_ENABLE "啟用 HTTP API"
#define D_FRIENDLY_NAME "暱稱"
#define D_BELKIN_WEMO "Belkin WeMo"
#define D_HUE_BRIDGE "Hue 橋接器"
#define D_SINGLE_DEVICE "單個裝置"
#define D_MULTI_DEVICE "多重裝置"
#define D_CONFIGURE_TEMPLATE "範本設定"
#define D_TEMPLATE_PARAMETERS "範本參數"
#define D_TEMPLATE_NAME "名稱"
#define D_BASE_TYPE "基於"
#define D_TEMPLATE_FLAGS "選項"
#define D_SAVE_CONFIGURATION "儲存設定"
#define D_CONFIGURATION_SAVED "設定已儲存"
#define D_CONFIGURATION_RESET "設定已重設"
#define D_PROGRAM_VERSION "軟體版本"
#define D_BUILD_DATE_AND_TIME "編譯日期與時間"
#define D_CORE_AND_SDK_VERSION "核心與 SDK 版本"
#define D_HOSTED_MCU "託管的 MCU"
#define D_FLASH_WRITE_COUNT "快閃記憶體寫入次數"
#define D_MAC_ADDRESS "MAC 位址"
#define D_MQTT_HOST "MQTT 主機"
#define D_MQTT_PORT "MQTT 通訊埠"
#define D_MQTT_CLIENT "MQTT 客戶端"
#define D_MQTT_USER "MQTT 使用者名稱"
#define D_MQTT_TOPIC "MQTT 主題"
#define D_MQTT_GROUP_TOPIC "MQTT 群組主題"
#define D_MQTT_FULL_TOPIC "MQTT 完整主題"
#define D_MQTT_NO_RETAIN "MQTT 不保留"
#define D_MDNS_DISCOVERY "mDNS 探索"
#define D_MDNS_ADVERTISE "mDNS 廣播"
#define D_ESP_CHIP_ID "ESP 晶片 ID"
#define D_FLASH_CHIP_ID "快閃記憶體 ID"
#define D_FLASH_CHIP_SIZE "快閃記憶體大小"
#define D_FREE_PROGRAM_SPACE "可用的程式空間"
#define D_UPGRADE_BY_WEBSERVER "透過網頁升級"
#define D_OTA_URL "OTA 網址"
#define D_START_UPGRADE "開始升級"
#define D_UPGRADE_BY_FILE_UPLOAD "透過檔案升級"
#define D_UPLOAD_FACTORY "切換至 safeboot 分割區"
#define D_UPLOAD_STARTED "已開始上傳"
#define D_UPGRADE_STARTED "已開始升級"
#define D_UPLOAD_DONE "已上傳完成"
#define D_UPLOAD_TRANSFER "上傳傳輸"
#define D_TRANSFER_STARTED "傳輸已開始"
#define D_UPLOAD_ERR_1 "未選擇任何檔案"
#define D_UPLOAD_ERR_2 "可用空間不足"
#define D_UPLOAD_ERR_3 "檔案簽章無效"
#define D_UPLOAD_ERR_4 "軟體刷入的大小超出記憶體實際大小"
#define D_UPLOAD_ERR_5 "上傳緩衝區不符"
#define D_UPLOAD_ERR_6 "上傳失敗。請開啟 Logging 3"
#define D_UPLOAD_ERR_7 "上傳取消"
#define D_UPLOAD_ERR_8 "檔案無效"
#define D_UPLOAD_ERR_9 "檔案過大"
#define D_UPLOAD_ERR_10 "無法初始化 RF 晶片"
#define D_UPLOAD_ERR_11 "無法抹除 RF 晶片"
#define D_UPLOAD_ERR_12 "無法寫入 RF 晶片"
#define D_UPLOAD_ERR_13 "無法解碼 RF 韌體"
#define D_UPLOAD_ERR_14 "不相容"
#define D_UPLOAD_ERROR_CODE "上傳錯誤代碼"
#define D_ENTER_COMMAND "輸入命令"
#define D_ENABLE_WEBLOG_FOR_RESPONSE "如果回應如預期，啟用 Weblog 2"
#define D_NEED_USER_AND_PASSWORD "需要 user=<使用者名稱>&password=<密碼>"
// xdrv_01_mqtt.ino
#define D_FINGERPRINT "驗證 TLS 指紋…"
#define D_TLS_CONNECT_FAILED_TO "TLS 連線失敗，因為"
#define D_RETRY_IN "重新嘗試倒數 " // Added space to append numbers in code
#define D_VERIFIED "指紋驗證成功"
#define D_INSECURE "指紋無效，連線不安全"
#define D_CONNECT_FAILED_TO "連線失敗："
// xplg_wemohue.ino
#define D_MULTICAST_DISABLED "已停用群播"
#define D_MULTICAST_REJOINED "已（重新）加入群播"
#define D_MULTICAST_JOIN_FAILED "加入群播失敗"
#define D_FAILED_TO_SEND_RESPONSE "回應發送失敗"
#define D_WEMO "WeMo"
#define D_WEMO_BASIC_EVENT "WeMo 基本事件"
#define D_WEMO_EVENT_SERVICE "WeMo 事件服務"
#define D_WEMO_META_SERVICE "WeMo meta 服務"
#define D_WEMO_SETUP "WeMo 設定"
#define D_RESPONSE_SENT "請求已發送"
#define D_HUE "Hue"
#define D_HUE_BRIDGE_SETUP "Hue 設定"
#define D_HUE_API_NOT_IMPLEMENTED "Hue API 尚未實現"
#define D_HUE_API "Hue API"
#define D_HUE_POST_ARGS "Hue POST 參數"
#define D_3_RESPONSE_PACKETS_SENT "已發送 3 個回應封包"
// xdrv_07_domoticz.ino
#define D_DOMOTICZ_PARAMETERS "Domoticz 參數"
#define D_DOMOTICZ_IDX "Idx"
#define D_DOMOTICZ_KEY_IDX "按鈕 idx"
#define D_DOMOTICZ_SWITCH_IDX "開關 idx"
#define D_DOMOTICZ_KEY "按鈕"
#define D_DOMOTICZ_SWITCH "開關"
#define D_DOMOTICZ_SENSOR_IDX "感應器 idx"
#define D_DOMOTICZ_TEMP "溫度"
#define D_DOMOTICZ_TEMP_HUM "溫度、濕度"
#define D_DOMOTICZ_TEMP_HUM_BARO "溫度、濕度、氣壓"
#define D_DOMOTICZ_POWER_ENERGY "功率、電量"
#define D_DOMOTICZ_ILLUMINANCE "照度"
#define D_DOMOTICZ_COUNT "計數/PM1"
#define D_DOMOTICZ_VOLTAGE "電壓/PM2.5"
#define D_DOMOTICZ_CURRENT "電流/PM10"
#define D_DOMOTICZ_AIRQUALITY "空氣品質"
#define D_DOMOTICZ_P1_SMART_METER "P1SmartMeter"
#define D_DOMOTICZ_UPDATE_TIMER "更新計時器"
// xdrv_09_timers.ino
#define D_CONFIGURE_TIMER "設定計時器"
#define D_TIMER_PARAMETERS "計時器參數"
#define D_TIMER_ENABLE "啟用"
#define D_TIMER_ARM "啟用"
#define D_TIMER_DAYS "日數"
#define D_TIMER_REPEAT "重複"
#define D_TIMER_OUTPUT "輸出"
#define D_TIMER_ACTION "採取行動"
// xdrv_10_knx.ino
#define D_CONFIGURE_KNX "設定 KNX"
#define D_KNX_PARAMETERS "KNX 參數"
#define D_KNX_GENERAL_CONFIG "一般"
#define D_KNX_PHYSICAL_ADDRESS "實體位址"
#define D_KNX_PHYSICAL_ADDRESS_NOTE "（在 KNX 網路中必須是唯一值）"
#define D_KNX_ENABLE "啟用 KNX"
#define D_KNX_GROUP_ADDRESS_TO_WRITE "要傳向群組位址的資料"
#define D_ADD "加入"
#define D_DELETE "移除"
#define D_REPLY "回覆"
#define D_KNX_GROUP_ADDRESS_TO_READ "要接收資料的群組位址"
#define D_RECEIVED_FROM "接收自"
#define D_KNX_COMMAND_WRITE "寫入"
#define D_KNX_COMMAND_READ "讀取"
#define D_KNX_COMMAND_OTHER "其他"
#define D_SENT_TO "傳送至"
#define D_KNX_WARNING "群組位址（0/0/0）已保留，無法使用"
#define D_KNX_ENHANCEMENT "增強通訊"
#define D_KNX_TX_SLOT "KNX TX"
#define D_KNX_RX_SLOT "KNX RX"
#define D_KNX_TX_SCENE "KNX SCENE TX"
#define D_KNX_RX_SCENE "KNX SCENE RX"
// xdrv_23_zigbee
#define D_ZIGBEE_PERMITJOIN_ACTIVE "允許加入的裝置"
#define D_ZIGBEE_MAPPING_TITLE "Tasmota Zigbee 映射"
#define D_ZIGBEE_NOT_STARTED "Zigbee 未啟動"
#define D_ZIGBEE_MAPPING_IN_PROGRESS_SEC "映射進行中（剩餘 %d 秒）"
#define D_ZIGBEE_MAPPING_NOT_PRESENT "無映射"
#define D_ZIGBEE_MAP_REFRESH "重新整理 Zigbee 映射表"
#define D_ZIGBEE_MAP "Zigbee 映射表"
#define D_ZIGBEE_PERMITJOIN "Zigbee 允許加入"
#define D_ZIGBEE_GENERATE_KEY "正在產生隨機 Zigbee 網路金鑰"
#define D_ZIGBEE_UNKNOWN_DEVICE "未知裝置"
#define D_ZIGBEE_UNKNOWN_ATTRIBUTE "未知屬性"
#define D_ZIGBEE_UNKNOWN_ENDPOINT "未知端點"
#define D_ZIGBEE_INVALID_PARAM "無效參數"
#define D_ZIGBEE_MISSING_PARAM "缺少參數"
#define D_ZIGBEE_UNKNWON_ATTRIBUTE "屬性名稱未知（已忽略）：%s"
#define D_ZIGBEE_TOO_MANY_CLUSTERS "每個指令最多只能有一個 Cluster ID"
#define D_ZIGBEE_CONFLICTING_ENDPOINTS "目標端點衝突"
#define D_ZIGBEE_WRONG_DELIMITER "負載分隔符錯誤"
#define D_ZIGBEE_UNRECOGNIZED_COMMAND "Zigbee 指令無法識別：%s"
#define D_ZIGBEE_TOO_MANY_COMMANDS "只允許 1 個指令（%d）"
#define D_ZIGBEE_NO_ATTRIBUTE "屬性清單中沒有屬性"
#define D_ZIGBEE_UNSUPPORTED_ATTRIBUTE_TYPE "不支援的屬性類型"
#define D_ZIGBEE_JSON_REQUIRED "設定需要 JSON 物件"
#define D_ZIGBEE_RESET_1_OR_2 "1 或 2 來重置"
#define D_ZIGBEE_EEPROM_FOUND_AT_ADDRESS "在位址找到 ZBBridge EEPROM"
#define D_ZIGBEE_RANDOMIZING_ZBCONFIG "正在隨機化 Zigbee 參數，請使用 'ZbConfig' 檢查"
// xdrv_89_dali.ino
#define D_SENSOR_DALI_RX "Dali RX"
#define D_SENSOR_DALI_TX "Dali TX"
#define D_CONFIGURE_DALI "設定 DALI"
// xdrv_03_energy.ino
#define D_ENERGY_TODAY "今日用電量"
#define D_ENERGY_YESTERDAY "昨日用電量"
#define D_ENERGY_TOTAL "總用電量"
// xdrv_92_vid6608.ino
#define D_VID6608_F "VID6608 F"
#define D_VID6608_CW "VID6608 CW"
// xsns_100_ina3221.ino
#define D_UNIT_CHARGE "Ah"
#define D_CHARGE "電量"
#define D_ENERGY "能量"
// xdrv_27_shutter.ino
#define D_OPEN "開"
#define D_CLOSE "關"
#define D_DOMOTICZ_SHUTTER "百葉窗"
// xdrv_28_pcf8574.ino
#define D_CONFIGURE_PCF8574 "設定 PCF8574"
#define D_PCF8574_PARAMETERS "PCF8574 參數"
#define D_INVERT_PORTS "反轉通訊埠"
#define D_DEVICE "裝置"
#define D_DEVICE_INPUT "輸入"
#define D_DEVICE_OUTPUT "輸出"
// xdrv_39_thermostat.ino, xdrv_85_esp32_ble_eq3_trv.ino
#define D_THERMOSTAT "溫控器"
#define D_THERMOSTAT_SET_POINT "設定溫度"
#define D_THERMOSTAT_SENSOR "目前溫度"
#define D_THERMOSTAT_GRADIENT "梯度溫度"
#define D_THERMOSTAT_DUTY_CYCLE "工作週期"
#define D_THERMOSTAT_VALVE_POSITION "閥門位置"
#define D_THERMOSTAT_CYCLE_TIME "循環時間"
#define D_THERMOSTAT_PI_AUTOTUNE "PI 自動調整"
#define D_THERMOSTAT_CONTROL_METHOD "控制方法"
#define D_THERMOSTAT_RAMP_UP "升溫"
#define D_THERMOSTAT_PI "PI"
#define D_THERMOSTAT_AUTOTUNE "自動調整"
#define D_THERMOSTAT_RAMP_UP_HYBRID "升溫（混合）"
#define D_THERMOSTAT_PI_HYBRID "PI（混合）"
#define D_THERMOSTAT_AUTOTUNE_HYBRID "自動調整（混合）"
// xdrv_79_esp32_ble.ino
#define D_CONFIGURE_BLE "設定 BLE"
#define D_BLE_PARAMETERS "藍牙設定"
#define D_BLE_ENABLE "啟用藍牙"
#define D_BLE_ACTIVESCAN "啟用主動掃描（*）"
#define D_BLE_DEVICES "看見的裝置"
#define D_BLE_REMARK "標記（*）的項目不會儲存於設定中"
// xsns_05_ds18b20.ino
#define D_SENSOR_BUSY "感應器忙碌中"
#define D_SENSOR_CRC_ERROR "感應器 CRC 校驗錯誤"
#define D_SENSORS_FOUND "已找到感測器"
// xsns_06_dht.ino
#define D_TIMEOUT_WAITING_FOR "等待超時"
#define D_START_SIGNAL_LOW "開始低電位"
#define D_START_SIGNAL_HIGH "開始高電位"
#define D_PULSE "脈衝"
#define D_CHECKSUM_FAILURE "校驗失敗"
// xsns_07_sht1x.ino
#define D_SENSOR_DID_NOT_ACK_COMMAND "感應器並未確認命令"
#define D_SHT1X_FOUND "發現 SHT1X 感測器"
// xsns_18_pms5003.ino
#define D_STANDARD_CONCENTRATION "CF-1 PM" // Standard Particle CF-1 Particle Matter
#define D_ENVIRONMENTAL_CONCENTRATION "PM" // Environmetal Particle Matter
#define D_PARTICALS_BEYOND "粒子"
// xsns_27_apds9960.ino
#define D_GESTURE "手勢"
#define D_COLOR_RED "紅"
#define D_COLOR_GREEN "綠"
#define D_COLOR_BLUE "藍"
#define D_CCT "CCT"
#define D_PROXIMITY "距離"
// xsns_32_mpu6050.ino
#define D_AX_AXIS "X 軸加速度"
#define D_AY_AXIS "Y 軸加速度"
#define D_AZ_AXIS "Z 軸加速度"
#define D_GX_AXIS "X 軸陀螺儀"
#define D_GY_AXIS "Y 軸陀螺儀"
#define D_GZ_AXIS "Z 軸陀螺儀"
// xsns_33_QMC5883L.ino
#define D_MX "X 軸磁感應"
#define D_MY "Y 軸磁感應"
#define D_MZ "Z 軸磁感應"
#define D_MAGNETICFLD "磁感應"
// xsns_34_hx711.ino
#define D_HX_CAL_REMOVE "移除重量"
#define D_HX_CAL_REFERENCE "載入參考重量"
#define D_HX_CAL_DONE "已校正"
#define D_HX_CAL_FAIL "校正失敗"
#define D_RESET_HX711 "歸零"
#define D_CONFIGURE_HX711 "設定電子秤"
#define D_HX711_PARAMETERS "電子秤參數"
#define D_ITEM_WEIGHT "物品重量"
#define D_REFERENCE_WEIGHT "參考重量"
#define D_CALIBRATE "校正"
#define D_CALIBRATION "校正"
//xsns_35_tx20.ino
#define D_TX20_WIND_DIRECTION "風向"
#define D_TX20_WIND_SPEED "風速"
#define D_TX20_WIND_SPEED_MIN "最低風速"
#define D_TX20_WIND_SPEED_MAX "最高風速"
#define D_TX20_NORTH "北"
#define D_TX20_EAST "東"
#define D_TX20_SOUTH "南"
#define D_TX20_WEST "西"
// xsns_53_sml.ino
#define D_TPWRIN "輸入總量"
#define D_TPWRIN0 "輸入總量 T0"
#define D_TPWRIN1 "輸入總量 T1"
#define D_TPWROUT "輸出總量"
#define D_TPWRCURR "目前實功（進/出）"
#define D_TPWRCURR1 "目前輸入實功 p1"
#define D_TPWRCURR2 "目前輸入實功 p2"
#define D_TPWRCURR3 "目前輸入實功 p3"
#define D_Strom_L1 "電流 L1"
#define D_Strom_L2 "電流 L2"
#define D_Strom_L3 "電流 L3"
#define D_Spannung_L1 "電壓 L1"
#define D_Spannung_L2 "電壓 L2"
#define D_Spannung_L3 "電壓 L3"
#define D_METERNR "表號"
#define D_METERSID "服務 ID"
#define D_GasIN "瓦斯表度數" // Gas-Verbrauch
#define D_H2oIN "水表度數" // H2o-Verbrauch
#define D_StL1L2L3 "電流 L1+L2+L3"
#define D_SpL1L2L3 "電壓 L1+L2+L3/3"
// xsns_86_tfminiplus.ino
#define D_SIGNALSTRENGTH "訊號強度"
#define D_CHIPTEMPERATURE "晶片溫度"
// xsns_60_GPS
#define D_LATITUDE "緯度"
#define D_LONGITUDE "經度"
#define D_HORIZONTAL_ACCURACY "水平精準度"
#define D_ALTITUDE "海拔"
#define D_VERTICAL_ACCURACY "垂直精準度"
#define D_SPEED "速度"
#define D_SPEED_ACCURACY "速度精準度"
#define D_HEADING "航向"
#define D_HEADING_ACCURACY "航向精準度"
#define D_SAT_FIX "衛星定位"
#define D_SAT_FIX_NO_FIX "無"
#define D_SAT_FIX_DEAD_RECK "推測定位"
#define D_SAT_FIX_2D "2D"
#define D_SAT_FIX_3D "3D"
#define D_SAT_FIX_GPS_DEAD "GPS 與推測定位"
#define D_SAT_FIX_TIME "僅時間定位"
// tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
// 原則上不翻譯
#define D_SENSOR_NONE "無"
#define D_SENSOR_USER "User"
#define D_SENSOR_OPTION "Option"
#define D_SENSOR_DHT11 "DHT11"
#define D_SENSOR_AM2301 "AM2301"
#define D_SENSOR_SI7021 "SI7021"
#define D_SENSOR_MS01 "MS01"
#define D_SENSOR_DS18X20 "DS18x20"
#define D_SENSOR_I2C_SCL "I2C SCL"
#define D_SENSOR_I2C_SDA "I2C SDA"
#define D_SENSOR_I2C_SER_TX "I2C Ser TX"
#define D_SENSOR_I2C_SER_RX "I2C Ser RX"
#define D_SENSOR_I2S_MCLK "I2S MCLK"
#define D_SENSOR_I2S_BCLK "I2S BCLK"
#define D_SENSOR_I2S_WS_IN "I2S BCLK IN"
#define D_SENSOR_I2S_WS "I2S WS"
#define D_SENSOR_I2S_BCLK_IN "I2S WS IN"
#define D_SENSOR_I2S_DIN "I2S DIN"
#define D_SENSOR_I2S_DOUT "I2S DOUT"
#define D_SENSOR_I2S_DAC "I2S DAC"
#define D_SENSOR_HDMI_CEC "HDMI CEC"
#define D_SENSOR_WS2812 "WS2812"
#define D_SENSOR_DFR562 "MP3 Player"
#define D_SENSOR_DFR562_BUSY "MP3 Busy"
#define D_SENSOR_IRSEND "IRsend"
#define D_SENSOR_SWITCH "Switch" // Suffix "1"
#define D_SENSOR_BUTTON "Button" // Suffix "1"
#define D_SENSOR_RELAY "Relay" // Suffix "1i"
#define D_SENSOR_LED "LED" // Suffix "1i"
#define D_SENSOR_LED_LINK "LedLink" // Suffix "i"
#define D_SENSOR_PWM "PWM" // Suffix "1"
#define D_SENSOR_COUNTER "Counter" // Suffix "1"
#define D_SENSOR_INTERRUPT "Interrupt"
#define D_SENSOR_INPUT "Input"
#define D_SENSOR_IRRECV "IRrecv"
#define D_SENSOR_MHZ_RX "MHZ Rx"
#define D_SENSOR_MHZ_TX "MHZ Tx"
#define D_SENSOR_HC8_RX "HC8 Rx"
#define D_SENSOR_PZEM004_RX "PZEM004 Rx"
#define D_SENSOR_PZEM016_RX "PZEM016 Rx"
#define D_SENSOR_PZEM017_RX "PZEM017 Rx"
#define D_SENSOR_PZEM0XX_TX "PZEM0XX Tx"
#define D_SENSOR_SAIR_RX "SAir Rx"
#define D_SENSOR_SAIR_TX "SAir Tx"
#define D_SENSOR_SPI_CS "SPI CS"
#define D_SENSOR_SPI_DC "SPI DC"
#define D_SENSOR_SPI_MISO "SPI MISO"
#define D_SENSOR_SPI_MOSI "SPI MOSI"
#define D_SENSOR_SPI_CLK "SPI CLK"
#define D_SENSOR_SDIO_CMD "SDIO CMD"
#define D_GPIO_TS_SPI_CS "TS SPI CS"
#define D_GPIO_TS_RST "TS RST"
#define D_GPIO_TS_IRQ "TS IRQ"
#define D_SENSOR_SDIO_CMD "SDIO CMD"
#define D_SENSOR_SDIO_CLK "SDIO CLK"
#define D_SENSOR_SDIO_D0 "SDIO D0"
#define D_SENSOR_SDIO_D1 "SDIO D1"
#define D_SENSOR_SDIO_D2 "SDIO D2"
#define D_SENSOR_SDIO_D3 "SDIO D3"
#define D_SENSOR_HSDIO_CMD "HSDIO CMD"
#define D_SENSOR_HSDIO_CLK "HSDIO CLK"
#define D_SENSOR_HSDIO_RST "HSDIO RST"
#define D_SENSOR_HSDIO_D0 "HSDIO D0"
#define D_SENSOR_HSDIO_D1 "HSDIO D1"
#define D_SENSOR_HSDIO_D2 "HSDIO D2"
#define D_SENSOR_HSDIO_D3 "HSDIO D3"
#define D_SENSOR_BACKLIGHT "Backlight"
#define D_SENSOR_PMS5003_TX "PMS5003 Tx"
#define D_SENSOR_PMS5003_RX "PMS5003 Rx"
#define D_SENSOR_SDS0X1_RX "SDS0X1 Rx"
#define D_SENSOR_SDS0X1_TX "SDS0X1 Tx"
#define D_SENSOR_HPMA_RX "HPMA Rx"
#define D_SENSOR_HPMA_TX "HPMA Tx"
#define D_SENSOR_SBR_RX "SerBr Rx"
#define D_SENSOR_SBR_TX "SerBr Tx"
#define D_SENSOR_MBR_TX "ModBr Tx"
#define D_SENSOR_MBR_RX "ModBr Rx"
#define D_SENSOR_MBR_TX_ENA "ModBr Tx Ena"
#define D_SENSOR_SR04_TRIG "SR04 Tri/TX"
#define D_SENSOR_SR04_ECHO "SR04 Ech/RX"
#define D_SENSOR_NRG_MBS_TX "NrgMbs Tx"
#define D_SENSOR_NRG_MBS_RX "NrgMbs Rx"
#define D_SENSOR_NRG_MBS_TX_ENA "NrgMbs Tx Ena"
#define D_SENSOR_SDM72_TX "SDM72 Tx"
#define D_SENSOR_SDM72_RX "SDM72 Rx"
#define D_SENSOR_SDM120_TX "SDMx20 Tx"
#define D_SENSOR_SDM120_RX "SDMx20 Rx"
#define D_SENSOR_SDM230_TX "SDM230 Tx"
#define D_SENSOR_SDM230_RX "SDM230 Rx"
#define D_SENSOR_SDM630_TX "SDM630 Tx"
#define D_SENSOR_SDM630_RX "SDM630 Rx"
#define D_SENSOR_WE517_TX "WE517 Tx"
#define D_SENSOR_WE517_RX "WE517 Rx"
#define D_SENSOR_LD2402_TX "LD2402 Tx"
#define D_SENSOR_LD2402_RX "LD2402 Rx"
#define D_SENSOR_LD2410_TX "LD2410 Tx"
#define D_SENSOR_LD2410_RX "LD2410 Rx"
#define D_SENSOR_LD2410S_TX "LD2410S Tx"
#define D_SENSOR_LD2410S_RX "LD2410S Rx"
#define D_GPIO_TM1621_CS "TM1621 CS"
#define D_GPIO_TM1621_WR "TM1621 WR"
#define D_GPIO_TM1621_RD "TM1621 RD"
#define D_GPIO_TM1621_DAT "TM1621 DAT"
#define D_SENSOR_TM1637_CLK "TM1637 CLK"
#define D_SENSOR_TM1637_DIO "TM1637 DIO"
#define D_SENSOR_TM1638_CLK "TM1638 CLK"
#define D_SENSOR_TM1638_DIO "TM1638 DIO"
#define D_SENSOR_TM1638_STB "TM1638 STB"
#define D_SENSOR_TM1640_CLK "TM1640 CLK"
#define D_SENSOR_TM1640_DIN "TM1640 DIN"
#define D_SENSOR_MAX7219_DIN "MAX7219 DIN"
#define D_SENSOR_MAX7219_CS "MAX7219 CS"
#define D_SENSOR_MAX7219_CLK "MAX7219 CLK"
#define D_SENSOR_HX711_SCK "HX711 SCK"
#define D_SENSOR_HX711_DAT "HX711 DAT"
#define D_SENSOR_FTC532 "FTC532"
#define D_SENSOR_BS814_CLK "BS814 CLK"
#define D_SENSOR_BS814_DAT "BS814 DAT"
#define D_SENSOR_TX2X_TX "TX2x"
#define D_SENSOR_RFSEND "RFSend"
#define D_SENSOR_RFRECV "RFrecv"
#define D_SENSOR_TUYA_TX "Tuya Tx"
#define D_SENSOR_TUYA_RX "Tuya Rx"
#define D_SENSOR_MGC3130_XFER "MGC3130 Xfr"
#define D_SENSOR_MGC3130_RESET "MGC3130 Rst"
#define D_SENSOR_SSPI_MISO "SSPI MISO"
#define D_SENSOR_SSPI_MOSI "SSPI MOSI"
#define D_SENSOR_SSPI_SCLK "SSPI SCLK"
#define D_SENSOR_SSPI_CS "SSPI CS"
#define D_SENSOR_SSPI_DC "SSPI DC"
#define D_SENSOR_RF_SENSOR "RF Sensor"
#define D_SENSOR_AZ_RX "AZ Rx"
#define D_SENSOR_AZ_TX "AZ Tx"
#define D_SENSOR_MAX31855_CS "MX31855 CS"
#define D_SENSOR_MAX31855_CLK "MX31855 CLK"
#define D_SENSOR_MAX31855_DO "MX31855 DO"
#define D_SENSOR_MAX31865_CS "MX31865 CS"
#define D_GPIO_RN2XX3_TX "RN2XX3 Tx"
#define D_GPIO_RN2XX3_RX "RN2XX3 Rx"
#define D_GPIO_RN2XX3_RST "RN2XX3 Rst"
#define D_GPIO_ASR650X_TX "ASR650x Tx"
#define D_GPIO_ASR650X_RX "ASR650x Rx"
#define D_GPIO_LORA_CS "LoRa CS"
#define D_GPIO_LORA_RST "LoRa Rst"
#define D_GPIO_LORA_BUSY "LoRa Busy"
#define D_GPIO_LORA_DI "LoRa DIO" // Suffix "0" .. "5"
#define D_SENSOR_NRG_SEL "HLWBL SEL" // Suffix "i"
#define D_SENSOR_NRG_CF1 "HLWBL CF1"
#define D_SENSOR_HLW_CF "HLW8012 CF"
#define D_SENSOR_HJL_CF "BL0937 CF"
#define D_SENSOR_MCP39F5_TX "MCP39F5 Tx"
#define D_SENSOR_MCP39F5_RX "MCP39F5 Rx"
#define D_SENSOR_MCP39F5_RST "MCP39F5 Rst"
#define D_SENSOR_CSE7761_TX "CSE7761 Tx"
#define D_SENSOR_CSE7761_RX "CSE7761 Rx"
#define D_SENSOR_CSE7766_TX "CSE7766 Tx"
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
#define D_SENSOR_BL0906_RX "BL0906 Rx"
#define D_SENSOR_BL0939_RX "BL0939 Rx"
#define D_SENSOR_BL0942_RX "BL0942 Rx"
#define D_SENSOR_HM330X_SET "HM330X SET"
#define D_SENSOR_PN532_TX "PN532 Tx"
#define D_SENSOR_PN532_RX "PN532 Rx"
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
#define D_SENSOR_P9813_CLK "P9813 Clk"
#define D_SENSOR_P9813_DAT "P9813 Dat"
#define D_SENSOR_MY92X1_DI "MY92x1 DI"
#define D_SENSOR_MY92X1_DCKI "MY92x1 DCKI"
#define D_SENSOR_ARIRFRCV "ALux IrRcv"
#define D_SENSOR_ARIRFSEL "ALux IrSel"
#define D_SENSOR_TXD "Serial Tx"
#define D_SENSOR_RXD "Serial Rx"
#define D_SENSOR_ROTARY "Rotary" // Suffix "1A"
#define D_SENSOR_HRE_CLOCK "HRE Clock"
#define D_SENSOR_HRE_DATA "HRE Data"
#define D_SENSOR_ADE7880_IRQ "ADE7880 IRQ"
#define D_SENSOR_ADE7953_IRQ "ADE7953 IRQ"
#define D_SENSOR_ADE7953_RST "ADE7953 RST"
#define D_SENSOR_ADE7953_CS "ADE7953 CS"
#define D_SENSOR_BUZZER "Buzzer"
#define D_SENSOR_DISP_RESET "Display Rst"
#define D_SENSOR_ZIGBEE_TXD "Zigbee Tx"
#define D_SENSOR_ZIGBEE_RXD "Zigbee Rx"
#define D_SENSOR_ZIGBEE_RST "Zigbee Rst"
#define D_SENSOR_SOLAXX1_TX "SolaxX1 Tx"
#define D_SENSOR_SOLAXX1_RX "SolaxX1 Rx"
#define D_SENSOR_SOLAXX1_RTS "SolaxX1 RTS"
#define D_SENSOR_IBEACON_TX "iBeacon TX"
#define D_SENSOR_IBEACON_RX "iBeacon RX"
#define D_SENSOR_RDM6300_RX "RDM6300 RX"
#define D_SENSOR_CC1101_CS "CC1101 CS"
#define D_SENSOR_A4988_DIR "A4988 DIR"
#define D_SENSOR_A4988_STP "A4988 STP"
#define D_SENSOR_A4988_ENA "A4988 ENA"
#define D_SENSOR_A4988_MS1 "A4988 MS1"
#define D_SENSOR_OUTPUT_HI "Output Hi"
#define D_SENSOR_OUTPUT_LO "Output Lo"
#define D_SENSOR_AS608_TX "AS608 Tx"
#define D_SENSOR_AS608_RX "AS608 Rx"
#define D_SENSOR_GM861_TX "GM861 Tx"
#define D_SENSOR_GM861_RX "GM861 Rx"
#define D_SENSOR_DDS2382_TX "DDS238-2 Tx"
#define D_SENSOR_DDS2382_RX "DDS238-2 Rx"
#define D_SENSOR_DDSU666_TX "DDSU666 Tx"
#define D_SENSOR_DDSU666_RX "DDSU666 Rx"
#define D_SENSOR_SM2135_CLK "SM2135 Clk"
#define D_SENSOR_SM2135_DAT "SM2135 Dat"
#define D_SENSOR_SM2335_CLK "SM2335 Clk"
#define D_SENSOR_SM2335_DAT "SM2335 Dat"
#define D_SENSOR_BP1658CJ_CLK "BP1658CJ Clk"
#define D_SENSOR_BP1658CJ_DAT "BP1658CJ Dat"
#define D_SENSOR_BP5758D_CLK "BP5758D Clk"
#define D_SENSOR_BP5758D_DAT "BP5758D Dat"
#define D_SENSOR_DEEPSLEEP "DeepSleep"
#define D_SENSOR_EXS_ENABLE "EXS Enable"
#define D_SENSOR_CLIENT_TX "Client TX"
#define D_SENSOR_CLIENT_RX "Client RX"
#define D_SENSOR_CLIENT_RESET "Client RST"
#define D_SENSOR_GPS_RX "GPS RX"
#define D_SENSOR_GPS_TX "GPS TX"
#define D_SENSOR_HM10_RX "HM10 RX"
#define D_SENSOR_HM10_TX "HM10 TX"
#define D_SENSOR_LE01MR_RX "LE-01MR Rx"
#define D_SENSOR_LE01MR_TX "LE-01MR Tx"
#define D_SENSOR_BL0940_RX "BL0940 Rx"
#define D_SENSOR_CC1101_GDO0 "CC1101 GDO0"
#define D_SENSOR_CC1101_GDO2 "CC1101 GDO2"
#define D_SENSOR_HRXL_RX "HRXL Rx"
#define D_SENSOR_DYP_RX "DYP Rx"
#define D_SENSOR_ELECTRIQ_MOODL "MOODL Tx"
#define D_SENSOR_AS3935 "AS3935"
#define D_SENSOR_WINDMETER_SPEED "WindMeter Spd"
#define D_SENSOR_TELEINFO_RX "TInfo Rx"
#define D_SENSOR_TELEINFO_ENABLE "TInfo EN"
#define D_SENSOR_LMT01_PULSE "LMT01 Pulse"
#define D_SENSOR_ADC_INPUT "ADC Input"
#define D_SENSOR_ADC_TEMP "ADC Temp"
#define D_SENSOR_ADC_LIGHT "ADC Light"
#define D_SENSOR_ADC_BUTTON "ADC Button"
#define D_SENSOR_ADC_RANGE "ADC Range"
#define D_SENSOR_ADC_CT_POWER "ADC CT Power"
#define D_SENSOR_ADC_JOYSTICK "ADC Joystick"
#define D_SENSOR_ADC_PH "ADC pH"
#define D_SENSOR_ADC_MQ "ADC MQ"
#define D_SENSOR_ADC_VOLTAGE "ADC Voltage"
#define D_SENSOR_ADC_CURRENT "ADC Current"
#define D_GPIO_WEBCAM_PWDN "CAM_PWDN"
#define D_GPIO_WEBCAM_RESET "CAM_RESET"
#define D_GPIO_WEBCAM_XCLK "CAM_XCLK"
#define D_GPIO_WEBCAM_SIOD "CAM_SIOD"
#define D_GPIO_WEBCAM_SIOC "CAM_SIOC"
#define D_GPIO_WEBCAM_DATA "CAM_DATA"
#define D_GPIO_WEBCAM_VSYNC "CAM_VSYNC"
#define D_GPIO_WEBCAM_HREF "CAM_HREF"
#define D_GPIO_WEBCAM_PCLK "CAM_PCLK"
#define D_GPIO_WEBCAM_PSCLK "CAM_PSCLK"
#define D_GPIO_WEBCAM_HSD "CAM_HSD"
#define D_GPIO_WEBCAM_PSRCS "CAM_PSRCS"
#define D_SENSOR_ETH_PHY_POWER "ETH POWER"
#define D_SENSOR_ETH_PHY_MDC "ETH MDC"
#define D_SENSOR_ETH_PHY_MDIO "ETH MDIO"
#define D_SENSOR_TCP_TXD "TCP Tx"
#define D_SENSOR_TCP_TXD_EN "TCP Tx En"
#define D_SENSOR_TCP_RXD "TCP Rx"
#define D_SENSOR_IEM3000_TX "iEM3000 TX"
#define D_SENSOR_IEM3000_RX "iEM3000 RX"
#define D_SENSOR_MIEL_HVAC_TX "MiEl HVAC Tx"
#define D_SENSOR_MIEL_HVAC_RX "MiEl HVAC Rx"
#define D_SENSOR_PROJECTOR_CTRL_TX "DLP Tx"
#define D_SENSOR_PROJECTOR_CTRL_RX "DLP Rx"
#define D_SENSOR_SHELLY_DIMMER_BOOT0 "SHD Boot 0"
#define D_SENSOR_SHELLY_DIMMER_RST_INV "SHD Reset"
#define D_SENSOR_RC522_RST "RC522 Rst"
#define D_SENSOR_RC522_CS "RC522 CS"
#define D_SENSOR_NRF24_CS "NRF24 CS"
#define D_SENSOR_NRF24_DC "NRF24 DC"
#define D_SENSOR_XPT2046_CS "XPT2046 CS"
#define D_SENSOR_ILI9341_CS "ILI9341 CS"
#define D_SENSOR_ILI9341_DC "ILI9341 DC"
#define D_SENSOR_ILI9488_CS "ILI9488 CS"
#define D_SENSOR_EPAPER29_CS "EPaper29 CS"
#define D_SENSOR_EPAPER42_CS "EPaper42 CS"
#define D_SENSOR_SSD1351_CS "SSD1351 CS"
#define D_SENSOR_SSD1351_DC "SSD1351 DC"
#define D_SENSOR_RA8876_CS "RA8876 CS"
#define D_SENSOR_ST7789_CS "ST7789 CS"
#define D_SENSOR_ST7789_DC "ST7789 DC"
#define D_SENSOR_SSD1331_CS "SSD1331 CS"
#define D_SENSOR_SSD1331_DC "SSD1331 DC"
#define D_SENSOR_SDCARD_CS "SDCard CS"
#define D_SENSOR_WIEGAND_D0 "Wiegand D0"
#define D_SENSOR_WIEGAND_D1 "Wiegand D1"
#define D_SENSOR_NEOPOOL_TX "NeoPool Tx"
#define D_SENSOR_NEOPOOL_RX "NeoPool Rx"
#define D_SENSOR_VL53LXX_XSHUT "VL53LXX XSHUT"
#define D_SENSOR_TFMINIPLUS_TX "TFmini+ TX"
#define D_SENSOR_TFMINIPLUS_RX "TFmini+ RX"
#define D_SENSOR_ZEROCROSS "ZC Pulse"
#define D_SENSOR_HALLEFFECT "HallEffect"
#define D_SENSOR_EPD_DATA "EPD Data"
#define D_SENSOR_PCF8574_INT "PCF8574 Int"
#define D_SENSOR_MCP23XXX_INT "MCP23xxx Int"
#define D_SENSOR_MCP23SXX_CS "MCP23Sxx CS"
#define D_SENSOR_MCP2515_CS "MCP2515 CS"
#define D_SENSOR_HRG15_RX "HRG15 Rx"
#define D_SENSOR_HRG15_TX "HRG15 Tx"
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
#define D_SENSOR_BL6523_TX "BL6523 Tx"
#define D_SENSOR_BL6523_RX "BL6523 Rx"
#define D_SENSOR_HEARTBEAT "Heartbeat"
#define D_SENSOR_RESET "Reset"
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
#define D_GPIO_SHIFT595_OE "74x595 OE"
#define D_GPIO_SHIFT595_SER "74x595 SER"
#define D_GPIO_DINGTIAN_CLK "Dingtian CLK"
#define D_GPIO_DINGTIAN_SDI "Dingtian SDI"
#define D_GPIO_DINGTIAN_Q7 "Dingtian Q7"
#define D_GPIO_DINGTIAN_PL "Dingtian PL"
#define D_GPIO_DINGTIAN_OE "Dingtian OE"
#define D_GPIO_DINGTIAN_RCK "Dingtian RCK"
#define D_SENSOR_CM11_TX "CM110x TX"
#define D_SENSOR_CM11_RX "CM110x RX"
#define D_SENSOR_FLOWRATEMETER "Flowrate"
#define D_SENSOR_ME007_TRIG "ME007 Tri"
#define D_SENSOR_ME007_RX "ME007 Rx"
#define D_SENSOR_TUYAMCUBR_TX "TuyaMCUBr Tx"
#define D_SENSOR_TUYAMCUBR_RX "TuyaMCUBr Rx"
#define D_SENSOR_TWAI_TX "TWAI Tx"
#define D_SENSOR_TWAI_RX "TWAI Rx"
#define D_SENSOR_TWAI_BO "TWAI BusOff"
#define D_SENSOR_TWAI_CLK "TWAI ClkOut"
#define D_SENSOR_BIOPDU_PZEM0XX_TX "BioPDU PZEM0XX Tx"
#define D_SENSOR_BIOPDU_PZEM016_RX "BioPDU PZEM016 Rx"
#define D_SENSOR_BIOPDU_BIT "BioPDU Bit"
#define D_SENSOR_LOX_O2_RX "LoxO2 RX"
#define D_GPIO_MAGIC_SWITCH "MagicSwitch"
#define D_SENSOR_WOOLIIS_RX "Wooliis Rx"
#define D_SENSOR_C8_CO2_5K_RX "C8-CO2-5K Rx"
#define D_SENSOR_C8_CO2_5K_TX "C8-CO2-5K Tx"
#define D_SENSOR_MKSKYBLU_TX "MkSkyBlu Tx"
#define D_SENSOR_MKSKYBLU_RX "MkSkyBlu Rx"
// Units
// 原則上不翻譯
#define D_UNIT_AMPERE "A"
#define D_UNIT_CELSIUS "C"
#define D_UNIT_CENTIMETER "cm"
#define D_UNIT_DEGREE "°"
#define D_UNIT_FAHRENHEIT "F"
#define D_UNIT_FPS "FPS"
#define D_UNIT_HERTZ "Hz"
#define D_UNIT_HOUR "時"
#define D_UNIT_GALLONS "gal"
#define D_UNIT_GALLONS_PER_MIN "g/m"
#define D_UNIT_GRAM_PER_CUBIC_METER "g/m³"
#define D_UNIT_INCH_MERCURY "inHg"
#define D_UNIT_INCREMENTS "inc"
#define D_UNIT_KELVIN "K"
#define D_UNIT_KILOMETER "km"
#define D_UNIT_KILOGRAM "kg"
#define D_UNIT_KILOMETER_PER_HOUR "km/h" // or "km/h"
#define D_UNIT_KILOOHM "kΩ"
#define D_UNIT_KILOWATTHOUR "kWh"
#define D_UNIT_LITERS "L"
#define D_UNIT_LITERS_PER_MIN "L/m"
#define D_UNIT_LUX "lx"
#define D_UNIT_METER "m"
#define D_UNIT_MICROGRAM_PER_CUBIC_METER "µg/m³"
#define D_UNIT_MICROMETER "µm"
#define D_UNIT_MICROSECOND "µs"
#define D_UNIT_MICROSIEMENS_PER_CM "µS/cm"
#define D_UNIT_MICROTESLA "µT"
#define D_UNIT_MILLIAMPERE "mA"
#define D_UNIT_MILLILITERS "ml"
#define D_UNIT_MILLIMETER "mm"
#define D_UNIT_MILLIMETER_MERCURY "mmHg"
#define D_UNIT_MILLISECOND "ms"
#define D_UNIT_MILLIVOLT "mV"
#define D_UNIT_MINUTE "分"
#define D_UNIT_PARTS_PER_BILLION "ppb"
#define D_UNIT_PARTS_PER_DECILITER "ppd"
#define D_UNIT_PARTS_PER_MILLION "ppm"
#define D_UNIT_MILIGRAMS_PER_LITER "mg/L"
#define D_UNIT_PERCENT "%%"
#define D_UNIT_PRESSURE "hPa"
#define D_UNIT_SECOND "秒"
#define D_UNIT_SECTORS "sectors"
#define D_UNIT_VA "VA"
#define D_UNIT_VAR "var"
#define D_UNIT_VOLT "V"
#define D_UNIT_WATT "W"
#define D_UNIT_WATTHOUR "Wh"
#define D_UNIT_WATT_METER_QUADRAT "W/m²"
#define D_UNIT_LITER_PER_MINUTE "l/min"
#define D_UNIT_CUBICMETER_PER_HOUR "m³/h"
#define D_UNIT_CUBIC_METER "m³"
#define D_NEW_ADDRESS "設定位址為"
#define D_OUT_OF_RANGE "超出範圍"
#define D_SENSOR_DETECTED "已偵測到"
//SDM220, SDM120, SDM72, LE01MR, SDM230
#define D_EXPORT_POWER "輸出功率"
#define D_IMPORT_POWER "輸入功率"
#define D_PHASE_ANGLE "相位角"
#define D_IMPORT_ACTIVE "輸入實功"
#define D_EXPORT_ACTIVE "輸出實功"
#define D_IMPORT_REACTIVE "輸入虛功"
#define D_EXPORT_REACTIVE "輸出虛功"
#define D_TOTAL_REACTIVE "總虛功"
#define D_UNIT_KWARH "kvarh"
#define D_UNIT_ANGLE "度"
#define D_TOTAL_ACTIVE "總電量"
#define D_RESETTABLE_TOTAL_ACTIVE "總電量（可重設）"
//SOLAXX1
#define D_PV1_VOLTAGE "PV1 電壓"
#define D_PV1_CURRENT "PV1 電流"
#define D_PV1_POWER "PV1 功率"
#define D_PV2_VOLTAGE "PV2 電壓"
#define D_PV2_CURRENT "PV2 電流"
#define D_PV2_POWER "PV2 功率"
#define D_SOLAR_POWER "太陽能"
#define D_INVERTER_POWER "逆變器功率"
#define D_STATUS "狀態"
#define D_SOLAX_MODE_0 "等待中"
#define D_SOLAX_MODE_1 "確認中"
#define D_SOLAX_MODE_2 "運作中"
#define D_SOLAX_MODE_3 "錯誤"
#define D_SOLAX_MODE_4 "永久故障" // to be translated
#define D_SOLAX_MODE_5 "軟體更新" // to be translated
#define D_SOLAX_MODE_6 "自我檢測" // to be translated
#define D_SOLAX_ERROR_0 "無錯誤碼"
#define D_SOLAX_ERROR_1 "電網失聯錯誤"
#define D_SOLAX_ERROR_2 "電網電壓錯誤"
#define D_SOLAX_ERROR_3 "電網頻率錯誤"
#define D_SOLAX_ERROR_4 "光伏電壓錯誤"
#define D_SOLAX_ERROR_5 "隔離錯誤"
#define D_SOLAX_ERROR_6 "過熱錯誤"
#define D_SOLAX_ERROR_7 "風扇錯誤"
#define D_SOLAX_ERROR_8 "其他裝置錯誤"
//xdrv_10_scripter.ino
#define D_CONFIGURE_SCRIPT "編輯腳本"
#define D_SCRIPT "編輯腳本"
#define D_SDCARD_UPLOAD "上傳檔案"
#define D_UFSDIR "UFS 目錄"
#define D_UPL_DONE "完成"
#define D_SCRIPT_CHARS_LEFT "剩餘字元"
#define D_SCRIPT_CHARS_NO_MORE "已達字元上限"
#define D_SCRIPT_DOWNLOAD "下載"
#define D_SCRIPT_ENABLE "啟用腳本"
#define D_SCRIPT_UPLOAD "上傳"
#define D_SCRIPT_UPLOAD_FILES "上傳檔案"
//xdrv_50_filesystem.ino
#define D_MANAGE_FILE_SYSTEM "管理檔案系統"
#define D_FS_SIZE "大小"
#define D_FS_FREE "可用"
#define D_NEW_FILE "newfile.txt"
#define D_CREATE_NEW_FILE "建立並編輯新檔案"
#define D_EDIT_FILE "編輯檔案"
#define D_CONFIRM_FILE_DEL "確認刪除檔案"
#define D_SHOW_HIDDEN_FILES "顯示隱藏檔案"
//xsns_67_as3935.ino
#define D_AS3935_GAIN "增益："
#define D_AS3935_ENERGY "能量："
#define D_AS3935_DISTANCE "距離："
#define D_AS3935_DISTURBER "干擾物："
#define D_AS3935_VRMS "µVrms："
#define D_AS3935_APRX "大約："
#define D_AS3935_AWAY "遠離"
#define D_AS3935_LIGHT "閃電"
#define D_AS3935_OUT "閃電在範圍外"
#define D_AS3935_NOT "距離不確定"
#define D_AS3935_ABOVE "閃電在頭上"
#define D_AS3935_NOISE "偵測到雜訊"
#define D_AS3935_DISTDET "偵測到干擾物"
#define D_AS3935_INTNOEV "觸發中斷但無對應事件！"
#define D_AS3935_FLICKER "IRQ 腳位閃爍！"
#define D_AS3935_POWEROFF "已關閉"
#define D_AS3935_NOMESS "監聽中…"
#define D_AS3935_ON "開啟"
#define D_AS3935_OFF "關閉"
#define D_AS3935_INDOORS "室內"
#define D_AS3935_OUTDOORS "戶外"
#define D_AS3935_CAL_FAIL "校正失敗"
#define D_AS3935_CAL_OK "已校正為："
//xsns_68_opentherm.ino
#define D_SENSOR_BOILER_OT_RX "OpenTherm RX"
#define D_SENSOR_BOILER_OT_TX "OpenTherm TX"
// xnrg_15_teleinfo Denky (Teleinfo)
#define D_CONTRACT "契約"
#define D_POWER_LOAD "負載率"
#define D_CURRENT_TARIFF "目前電價"
#define D_TARIFF "電價"
#define D_OVERLOAD "ADPS"
#define D_MAX_POWER "最大功率"
#define D_MAX_CURRENT "最大電流"
// xsns_79_as608.ino
#define D_FP_ENROLL_PLACEFINGER "放置手指"
#define D_FP_ENROLL_REMOVEFINGER "移開手指"
#define D_FP_ENROLL_PLACESAMEFINGER "再次放置相同手指"
#define D_FP_ENROLL_RETRY "錯誤，請重試"
#define D_FP_ENROLL_RESTART "重新開始"
#define D_FP_ENROLL_ERROR "錯誤"
#define D_FP_ENROLL_RESET "重設"
#define D_FP_ENROLL_ACTIVE "啟動"
#define D_FP_ENROLL_INACTIVE "未啟動"
// Indexed by Adafruit_Fingerprint.h defines
#define D_FP_PACKETRECIEVEERR "通訊錯誤" // 0x01 Error when receiving data package
#define D_FP_NOFINGER "" // 0x02 No finger on the sensor
#define D_FP_IMAGEFAIL "成像錯誤" // 0x03 Failed to enroll the finger
#define D_FP_IMAGEMESS "影像模糊/品質不佳" // 0x06 Failed to generate character file due to overly disorderly fingerprint image
#define D_FP_FEATUREFAIL "特徵提取失敗（指紋太小）" // 0x07 Failed to generate character file due to the lack of character point or small fingerprint image
#define D_FP_NOMATCH "指紋不符" // 0x08 Finger doesn't match
#define D_FP_NOTFOUND "找不到符合的指紋" // 0x09 Failed to find matching finger
#define D_FP_ENROLLMISMATCH "指紋不符" // 0x0A Failed to combine the character files
#define D_FP_BADLOCATION "位置錯誤" // 0x0B Addressed PageID is beyond the finger library
#define D_FP_DBRANGEFAIL "資料庫範圍錯誤" // 0x0C Error when reading template from library or invalid template
#define D_FP_UPLOADFEATUREFAIL "特徵上傳錯誤" // 0x0D Error when uploading template
#define D_FP_PACKETRESPONSEFAIL "封包回應錯誤" // 0x0E Module failed to receive the following data packages
#define D_FP_UPLOADFAIL "上傳錯誤" // 0x0F Error when uploading image
#define D_FP_DELETEFAIL "刪除錯誤" // 0x10 Failed to delete the template
#define D_FP_DBCLEARFAIL "清除資料庫錯誤" // 0x11 Failed to clear finger library
#define D_FP_PASSFAIL "密碼錯誤" // 0x13 Find whether the fingerprint passed or failed
#define D_FP_INVALIDIMAGE "影像無效" // 0x15 Failed to generate image because of lac of valid primary image
#define D_FP_FLASHERR "快閃記憶體寫入錯誤" // 0x18 Error when writing flash
#define D_FP_INVALIDREG "編號無效" // 0x1A Invalid register number
#define D_FP_ADDRCODE "位址碼" // 0x20 Address code
#define D_FP_PASSVERIFY "密碼驗證成功" // 0x21 Verify the fingerprint passed
#define D_FP_UNKNOWNERROR "錯誤" // Any other error
// xsns_90_hrg15.ino
#define D_HRG_VALID "有效"
#define D_HRG_ACTIVE "作用中"
#define D_HRG_EVENT "事件"
#define D_HRG_TOTAL "總計"
#define D_HRG_FLOWRATE "流量"
// xsns_96_flowratemeter.ino
#define D_FLOWRATEMETER_NAME "流量計"
#define D_FLOWRATEMETER_AMOUNT_TODAY "今日總量"
#define D_FLOWRATEMETER_DURATION_TODAY "今日時長"
// xsns_83_neopool.ino
#define D_NEOPOOL_MACH_NONE "NeoPool" // Machine names
#define D_NEOPOOL_MACH_HIDROLIFE "Hidrolife"
#define D_NEOPOOL_MACH_AQUASCENIC "Aquascenic"
#define D_NEOPOOL_MACH_OXILIFE "Oxilife"
#define D_NEOPOOL_MACH_BIONET "Bionet"
#define D_NEOPOOL_MACH_HIDRONISER "Hidroniser"
#define D_NEOPOOL_MACH_UVSCENIC "UVScenic"
#define D_NEOPOOL_MACH_STATION "Station"
#define D_NEOPOOL_MACH_BRILIX "Brilix"
#define D_NEOPOOL_MACH_GENERIC "通用"
#define D_NEOPOOL_MACH_BAYROL "Bayrol"
#define D_NEOPOOL_MACH_HAY "Hay"
#define D_NEOPOOL_FILTRATION_MANUAL "手動" // Filtration modes
#define D_NEOPOOL_FILTRATION_AUTO "自動"
#define D_NEOPOOL_FILTRATION_HEATING "加熱"
#define D_NEOPOOL_FILTRATION_SMART "智慧"
#define D_NEOPOOL_FILTRATION_INTELLIGENT "智能"
#define D_NEOPOOL_FILTRATION_BACKWASH "反沖洗"
#define D_NEOPOOL_FILTRATION_NONE "" // Filtration speed level
#define D_NEOPOOL_FILTRATION_SLOW "慢速"
#define D_NEOPOOL_FILTRATION_MEDIUM "中速"
#define D_NEOPOOL_FILTRATION_FAST "快速"
#define D_NEOPOOL_TYPE "類型" // Sensor & relais names
#define D_NEOPOOL_REDOX "氧化還原"
#define D_NEOPOOL_CHLORINE "氯"
#define D_NEOPOOL_CONDUCTIVITY "導電度"
#define D_NEOPOOL_IONIZATION "離子化"
#define D_NEOPOOL_HYDROLYSIS "水解"
#define D_NEOPOOL_RELAY "繼電器"
#define D_NEOPOOL_RELAY_FILTRATION "過濾" // Relay assignment
#define D_NEOPOOL_RELAY_LIGHT "燈光"
#define D_NEOPOOL_RELAY_PH_ACID "酸泵"
#define D_NEOPOOL_RELAY_PH_BASE "鹼泵"
#define D_NEOPOOL_RELAY_RX "氧化還原等級"
#define D_NEOPOOL_RELAY_CL "氯泵"
#define D_NEOPOOL_RELAY_CD "導電度"
#define D_NEOPOOL_RELAY_HEATING "加熱"
#define D_NEOPOOL_RELAY_UV "UV"
#define D_NEOPOOL_RELAY_VALVE "閥門"
#define D_NEOPOOL_RELAY_AUX "Aux"
#define D_NEOPOOL_TIME "時間"
#define D_NEOPOOL_FILT_MODE "過濾模式"
#define D_NEOPOOL_CELL_RUNTIME "電解槽運作時間"
#define D_NEOPOOL_POLARIZATION "電極極性" // Sensor status
#define D_NEOPOOL_PR_OFF "製氯關閉"
#define D_NEOPOOL_SETPOINT_OK "設定值 OK"
#define D_NEOPOOL_COVER "泳池蓋"
#define D_NEOPOOL_SHOCK "加氯衝擊"
#define D_NEOPOOL_STATUS_ON "開"
#define D_NEOPOOL_STATUS_OFF "關"
#define D_NEOPOOL_STATUS_WAIT "等待"
#define D_NEOPOOL_STATUS_TANK "水箱"
#define D_NEOPOOL_STATUS_FLOW "流量"
#define D_NEOPOOL_LOW "低"
#define D_NEOPOOL_FLOW1 "FL1"
#define D_NEOPOOL_FLOW2 "FL2"
#define D_NEOPOOL_PH_HIGH "太高" // ph Alarms
#define D_NEOPOOL_PH_LOW "太低"
#define D_NEOPOOL_PUMP_TIME_EXCEEDED "已達泵浦運作時間上限"
// xsns_106_gdk101.ino
#define D_AVG_RAD_DOSE "平均輻射劑量"
#define D_UNIT_US_H "µSv/h"
// ixrv92_pipsolar.ino
#define D_SENSOR_PIPSOLAR_TX "Pipsolar TX"
#define D_SENSOR_PIPSOLAR_RX "Pipsolar RX"
// xsns_102_ld2410.ino
#define D_MOVING_DISTANCE "移動距離"
#define D_STATIC_DISTANCE "靜止距離"
#define D_DETECT_DISTANCE "偵測距離"
#define D_MOVING_ENERGY_T "移動目標"
#define D_STATIC_ENERGY_T "靜止目標"
#define D_LD2410_PIN_STATE "輸出腳位狀態"
#define D_LD2410_LIGHT "光照感應器"
// xsns_115_wooliis.ino
#define D_IMPORT "輸入"
#define D_EXPORT "輸出"
#define D_CHARGING "充電中"
#define D_CAPACITY "容量"
// xnrg_25_v9240.ino
#define D_SENSOR_V9240_TX "V9240 TX"
#define D_SENSOR_V9240_RX "V9240 RX"
#define D_SENSOR_MBS_RX_ENA "ModBr Rx Ena"
// xdrv_94_modbus_relay.ino
#define D_MODBUSRELAY_TX "MbsRelay TX"
#define D_MODBUSRELAY_TX_ENA "MbsRelay TX Ena"
#define D_MODBUSRELAY_RX "MbsRelay RX"
#define D_MODBUSRELAY_RX_ENA "MbsRelay RX Ena"
#endif // _LANGUAGE_ZH_TW_H_
View Git Blame Copy Permalink