mirror of
https://github.com/arendst/Tasmota.git
synced 2026-10-26 22:11:22 +00:00
db46cbc14d
* copy pins_arduino from tasmota not framework * move specific P4 settings out of pins_arduino.h * keep backwards compability with the option to redefine the specific different P4 board configs * Keep P4 SD card on SDMMC slot 0 and set hosted MCU pins in default module Arduino core and libraries do not see my_user_config.h, so without BOARD_SDMMC_SLOT in pins_arduino.h SD_MMC uses slot 1 which is taken by ESP-Hosted. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Add command Ldo<x> <mV> to configure ESP32-P4 LDO3 and LDO4 LDOs are set at boot before any GPIO use. LDO settings of DSI display descriptor, CSI camera and SD card are only used if not set by command Ldo and are deprecated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Show clear error if pins_arduino.h for a variant is missing Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Jason2866 <obermeier.johann@googlemail.com> Co-authored-by: Jason2866 <24528715+Jason2866@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
1071 lines
46 KiB
C
1071 lines
46 KiB
C
/*
|
|
i18n.h - internationalization for Tasmota
|
|
|
|
Copyright (C) 2021 Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef _I18N_H_
|
|
#define _I18N_H_
|
|
|
|
/*********************************************************************************************\
|
|
* All text used in Commands, MQTT, JSON messages only in English (#1473)
|
|
*
|
|
* (At this location they can/may be overruled by language files using undefs)
|
|
\*********************************************************************************************/
|
|
|
|
#define D_JSON_ABORTED "Aborted"
|
|
#define D_JSON_ACK "Ack"
|
|
#define D_JSON_ACTIVE "Active"
|
|
#define D_JSON_ADDRESS "Address"
|
|
#define D_JSON_AHUM "aHumidity"
|
|
#define D_JSON_AIRQUALITY "AirQuality"
|
|
#define D_JSON_ANALOG_INPUT "Analog"
|
|
#define D_JSON_AP "AP" // Access Point
|
|
#define D_JSON_APMAC_ADDRESS "APMac"
|
|
#define D_JSON_APPENDED "Appended"
|
|
#define D_JSON_BANDWIDTH "Bandwidth"
|
|
#define D_JSON_BAUDRATE "Baudrate"
|
|
#define D_JSON_BLINK "Blink"
|
|
#define D_JSON_BLOCKED_LOOP "Blocked Loop"
|
|
#define D_JSON_BLUE "Blue"
|
|
#define D_JSON_BOOTVERSION "Boot"
|
|
#define D_JSON_BOOTCOUNT "BootCount"
|
|
#define D_JSON_BSSID "BSSId"
|
|
#define D_JSON_BUTTON "Button"
|
|
#define D_JSON_BUILDDATETIME "BuildDateTime"
|
|
#define D_JSON_CAPACITY "Capacity"
|
|
#define D_JSON_CHANNEL "Channel"
|
|
#define D_JSON_CHARGING "Charging"
|
|
#define D_JSON_CO2 "CarbonDioxide"
|
|
#define D_JSON_CODINGRATE4 "CodingRate4"
|
|
#define D_JSON_COMMAND "Command"
|
|
#define D_JSON_CONFIDENCE "Confidence"
|
|
#define D_JSON_CONFIG_HOLDER "CfgHolder"
|
|
#define D_JSON_CONNECT_FAILED "Connect failed"
|
|
#define D_JSON_CONNECTION_LOST "Connection lost"
|
|
#define D_JSON_COREVERSION "Core"
|
|
#define D_JSON_COUNT "Count"
|
|
#define D_JSON_COUNTER "Counter"
|
|
#define D_JSON_CRC_BYTES "CrcBytes"
|
|
#define D_JSON_CURRENT "Current" // As in Voltage and Current
|
|
#define D_JSON_CURRENT_LIMIT "CurrentLimit"
|
|
#define D_JSON_CURRENT_NEUTRAL "CurrentNeutral"
|
|
#define D_JSON_DARKNESS "Darkness"
|
|
#define D_JSON_DATA "Data"
|
|
#define D_JSON_DEWPOINT "DewPoint"
|
|
#define D_JSON_DO "DisolvedOxygen"
|
|
#define D_JSON_DISTANCE "Distance"
|
|
#define D_JSON_DNSSERVER "DNSServer"
|
|
#define D_JSON_DONE "Done"
|
|
#define D_JSON_DOWNTIME "Downtime"
|
|
#define D_JSON_EC "EC"
|
|
#define D_JSON_ECO2 "eCO2"
|
|
#define D_JSON_EMPTY "Empty"
|
|
#define D_JSON_ENDDST "EndDST" // End Daylight Savings Time
|
|
#define D_JSON_ENERGY "Energy"
|
|
#define D_JSON_ERASE "Erase"
|
|
#define D_JSON_ERROR "Error"
|
|
#define D_JSON_EVENT "Event"
|
|
#define D_JSON_EVERY "Every"
|
|
#define D_JSON_EXPORT "Export"
|
|
#define D_JSON_EXPORT_ACTIVE "ExportActive"
|
|
#define D_JSON_EXPORT_ACTIVE_TOTAL "ExportActiveTotal"
|
|
#define D_JSON_EXPORT_REACTIVE "ExportReactive"
|
|
#define D_JSON_EXPORT_POWER "ExportPower"
|
|
#define D_JSON_FAILED "Failed"
|
|
#define D_JSON_FALLBACKTOPIC "FallbackTopic"
|
|
#define D_JSON_FEATURES "Features"
|
|
#define D_JSON_FLASHCHIPID "FlashChipId"
|
|
#define D_JSON_FLASHMODE "FlashMode"
|
|
#define D_JSON_FLASHSIZE "FlashSize"
|
|
#define D_JSON_FLOWRATE "FlowRate"
|
|
#define D_JSON_FREEMEMORY "Free"
|
|
#define D_JSON_FREQUENCY "Frequency"
|
|
#define D_JSON_FROM "from"
|
|
#define D_JSON_GAS "Gas"
|
|
#define D_JSON_GATEWAY "Gateway"
|
|
#define D_JSON_GREEN "Green"
|
|
#define D_JSON_GROUPS "Groups"
|
|
#define D_JSON_HALLEFFECT "HallEffect"
|
|
#define D_JSON_HALTING "Halting"
|
|
#define D_JSON_HCHO "Formaldehyde"
|
|
#define D_JSON_HEAPSIZE "Heap"
|
|
#define D_JSON_HEATINDEX "HeatIndex"
|
|
#define D_JSON_HIGH "High"
|
|
#define D_JSON_HOST_NOT_FOUND "Host not found"
|
|
#define D_JSON_FILE_NOT_FOUND "File not found"
|
|
#define D_JSON_OTHER_HTTP_ERROR "Other http error"
|
|
#define D_JSON_HSBCOLOR "HSBColor"
|
|
#define D_JSON_HUMIDITY "Humidity"
|
|
#define D_JSON_ID "Id"
|
|
#define D_JSON_ILLUMINANCE "Illuminance"
|
|
#define D_JSON_IMPLICIT_HEADER "ImplicitHeader"
|
|
#define D_JSON_IMPORT_ACTIVE "ImportActive"
|
|
#define D_JSON_IMPORT_POWER "ImportPower"
|
|
#define D_JSON_IMPORT_REACTIVE "ImportReactive"
|
|
#define D_JSON_INFRARED "Infrared"
|
|
#define D_JSON_INVALID_FILE_TYPE "Invalid filetype or buffer"
|
|
#define D_JSON_IP6_GLOBAL "IP6Global"
|
|
#define D_JSON_IP6_LOCAL "IP6Local"
|
|
#define D_JSON_UNKNOWN "Unknown"
|
|
#define D_JSON_LIGHT "Light"
|
|
#define D_JSON_LINK_COUNT "LinkCount"
|
|
#define D_JSON_LOCAL_TIME "Local"
|
|
#define D_JSON_LOW "Low"
|
|
#define D_JSON_MAC "Mac"
|
|
#define D_JSON_MASK "Mask"
|
|
#define D_JSON_MD5_MISMATCH "MD5 mismatch"
|
|
#define D_JSON_MEMORY_ERROR "Memory error"
|
|
#define D_JSON_MINIMAL "minimal"
|
|
#define D_JSON_MODEL "Model"
|
|
#define D_JSON_MOISTURE "Moisture"
|
|
#define D_JSON_MQTT_COUNT "MqttCount"
|
|
#define D_JSON_MQTT_TLS "MqttTLS"
|
|
#define D_JSON_NULL "null"
|
|
#define D_JSON_NO "No"
|
|
#define D_JSON_NOISE "Noise"
|
|
#define D_JSON_NONE "None"
|
|
#define D_JSON_OR "or"
|
|
#define D_JSON_ORP "ORP"
|
|
#define D_JSON_OUTPUT_POWER "OutputPower"
|
|
#define D_JSON_O2 "Oxygen"
|
|
#define D_JSON_PERIOD "Period"
|
|
#define D_JSON_PH "pH"
|
|
#define D_JSON_PHASE_ANGLE "PhaseAngle"
|
|
#define D_JSON_POWERFACTOR "Factor"
|
|
#define D_JSON_POWERMAX "MaxPower"
|
|
#define D_JSON_POWERUSAGE "Power"
|
|
#define D_JSON_POWERUSAGE_TOTAL "PowerTotal"
|
|
#define D_JSON_ACTIVE_POWERUSAGE "ActivePower"
|
|
#define D_JSON_APPARENT_POWERUSAGE "ApparentPower"
|
|
#define D_JSON_REACTIVE_POWERUSAGE "ReactivePower"
|
|
#define D_JSON_RANGE "Range"
|
|
#define D_JSON_PREAMBLE_LENGTH "PreambleLength"
|
|
#define D_JSON_PRESSURE "Pressure"
|
|
#define D_JSON_PRESSUREATSEALEVEL "SeaPressure"
|
|
#define D_JSON_PRESSURE_UNIT "PressureUnit"
|
|
#define D_JSON_PROBETEMPERATURE "ProbeTemperature"
|
|
#define D_JSON_PROGRAMFLASHSIZE "ProgramFlashSize"
|
|
#define D_JSON_PROGRAMSIZE "ProgramSize"
|
|
#define D_JSON_STACKLOWMARK "StackLowMark"
|
|
#define D_JSON_PSRMAXMEMORY "PsrMax"
|
|
#define D_JSON_PSRFREEMEMORY "PsrFree"
|
|
#define D_JSON_PUMP "Pumped"
|
|
#define D_JSON_RED "Red"
|
|
#define D_JSON_REFERENCETEMPERATURE "ReferenceTemperature"
|
|
#define D_JSON_REGION "Region"
|
|
#define D_JSON_REMAINING "Remaining"
|
|
#define D_JSON_RESET "Reset"
|
|
#define D_JSON_RESISTANCE "Resistance"
|
|
#define D_JSON_RESOLUTION "Resolution"
|
|
#define D_JSON_RESTARTING "Restarting"
|
|
#define D_JSON_RESTARTREASON "RestartReason"
|
|
#define D_JSON_RSSI "RSSI"
|
|
#define D_JSON_RUNTIME "Runtime"
|
|
#define D_JSON_SAVEADDRESS "SaveAddress"
|
|
#define D_JSON_SAVECOUNT "SaveCount"
|
|
#define D_JSON_SAVED "Saved"
|
|
#define D_JSON_SAVESTATE "SaveState"
|
|
#define D_JSON_SDKVERSION "SDK"
|
|
#define D_JSON_SELECTED "selected"
|
|
#define D_JSON_SERIALRECEIVED "SerialReceived"
|
|
#define D_JSON_SET "Set"
|
|
#define D_JSON_SIGNAL "Signal"
|
|
#define D_JSON_SIZE "Size"
|
|
#define D_JSON_SPEED "Speed"
|
|
#define D_JSON_SPEED_UNIT "SpeedUnit"
|
|
#define D_JSON_SPREADING_FACTOR "SpreadingFactor"
|
|
#define D_JSON_SSID "SSId"
|
|
#define D_JSON_STAGE "Stage"
|
|
#define D_JSON_STARTDST "StartDST" // Start Daylight Savings Time
|
|
#define D_JSON_STARTED "Started"
|
|
#define D_JSON_STARTUPUTC "StartupUTC"
|
|
#define D_JSON_STATUS "Status"
|
|
#define D_JSON_SUBNETMASK "Subnetmask"
|
|
#define D_JSON_SUCCESSFUL "Successful"
|
|
#define D_JSON_SUNRISE "Sunrise"
|
|
#define D_JSON_SUNSET "Sunset"
|
|
#define D_JSON_SWITCH "Switch"
|
|
#define D_JSON_SYNC "Sync"
|
|
#define D_JSON_SYNCWORD "SyncWord"
|
|
#define D_JSON_TEMPERATURE "Temperature"
|
|
#define D_JSON_TEMPERATURE_UNIT "TempUnit"
|
|
#define D_JSON_TIME "Time"
|
|
#define D_JSON_TODAY "Today"
|
|
#define D_JSON_TODAY_SUM_EXPORT "TodaySumExport"
|
|
#define D_JSON_TODAY_SUM_IMPORT "TodaySumImport"
|
|
#define D_JSON_TOTAL "Total"
|
|
#define D_JSON_TOTAL_USAGE "TotalUsage"
|
|
#define D_JSON_TOTAL_REACTIVE "TotalReactive"
|
|
#define D_JSON_TOTAL_START_TIME "TotalStartTime"
|
|
#define D_JSON_TVOC "TVOC"
|
|
#define D_JSON_TYPE "Type"
|
|
#define D_JSON_UID "UID"
|
|
#define D_JSON_UPTIME "Uptime"
|
|
#define D_JSON_UTC_TIME "UTC"
|
|
#define D_JSON_UV_INDEX "UvIndex"
|
|
#define D_JSON_UV_INDEX_TEXT "UvIndexText"
|
|
#define D_JSON_UV_LEVEL "UvLevel"
|
|
#define D_JSON_UV_POWER "UvPower"
|
|
#define D_JSON_VALID "Valid"
|
|
#define D_JSON_VCC "Vcc"
|
|
#define D_JSON_VERSION "Version"
|
|
#define D_JSON_VOLTAGE "Voltage"
|
|
#define D_JSON_VOLUME "Volume"
|
|
#define D_JSON_WATER_DEPTH "Water Depth"
|
|
#define D_JSON_WEIGHT "Weight"
|
|
#define D_JSON_WIFI "Wifi"
|
|
#define D_JSON_WIFI_MODE "Mode"
|
|
#define D_JSON_NOT_STARTED "Not Started"
|
|
#define D_JSON_SCANNING "Scanning"
|
|
#define D_JSON_TESTING "Testing"
|
|
#define D_JSON_BUSY "Busy"
|
|
#define D_JSON_ENCRYPTION "Encryption"
|
|
#define D_JSON_WRONG "Wrong"
|
|
#define D_JSON_WRONG_PARAMETERS "Wrong parameters"
|
|
#define D_JSON_YESTERDAY "Yesterday"
|
|
#define D_JSON_ZERO_POINT_CALIBRATION "Zero Point Calibration"
|
|
#define D_JSON_PV1_VOLTAGE "Pv1Voltage"
|
|
#define D_JSON_PV1_CURRENT "Pv1Current"
|
|
#define D_JSON_PV1_POWER "Pv1Power"
|
|
#define D_JSON_PV2_VOLTAGE "Pv2Voltage"
|
|
#define D_JSON_PV2_CURRENT "Pv2Current"
|
|
#define D_JSON_PV2_POWER "Pv2Power"
|
|
#define D_JSON_SOLAR_POWER "SolarPower"
|
|
#define D_JSON_USAGE "Usage"
|
|
#define D_JSON_IMPORT "Import"
|
|
#define D_JSON_EXPORT "Export"
|
|
#define D_JSON_TOTAL_ACTIVE "TotalActive"
|
|
#define D_JSON_RESETTABLE_TOTAL_ACTIVE "ResetTotalActive"
|
|
#define D_JSON_SIGNALSTRENGTH "SignalStrength"
|
|
#define D_JSON_CHIPTEMPERATURE "ChipTemperature"
|
|
#define D_JSON_RAW "Raw"
|
|
#define D_JSON_MX "XaxisInduction"
|
|
#define D_JSON_MY "YaxisInduction"
|
|
#define D_JSON_MZ "ZaxisInduction"
|
|
#define D_JSON_MAGNETICFLD "MagneticInduction"
|
|
#define D_JSON_ALERT "Alert"
|
|
#define D_JSON_BATTPERCENT "BatteryPercentage"
|
|
#define D_RSLT_ENERGY "ENERGY"
|
|
#define D_RSLT_HASS_STATE "HASS_STATE"
|
|
#define D_RSLT_INFO "INFO"
|
|
#define D_RSLT_MARGINS "MARGINS"
|
|
#define D_RSLT_POWER "POWER"
|
|
#define D_RSLT_RESULT "RESULT"
|
|
#define D_RSLT_SENSOR "SENSOR"
|
|
#define D_RSLT_STATE "STATE"
|
|
#define D_RSLT_UPTIME "UPTIME"
|
|
#define D_RSLT_WARNING "WARNING"
|
|
#define D_RSLT_COMMAND "COMMAND"
|
|
|
|
#define D_LOG_SOME_SETTINGS_RESET "Some settings have been reset"
|
|
|
|
// Commands tasmota.ino
|
|
#define D_CMND_BACKLOG "Backlog"
|
|
#define D_CMND_JSON "Json"
|
|
#define D_CMND_JSON_PP "JsonPP"
|
|
#define D_CMND_DELAY "Delay"
|
|
#define D_CMND_NODELAY "NoDelay"
|
|
#define D_CMND_STATUS "Status"
|
|
#define D_STATUS1_PARAMETER "PRM"
|
|
#define D_STATUS2_FIRMWARE "FWR"
|
|
#define D_STATUS3_LOGGING "LOG"
|
|
#define D_STATUS4_MEMORY "MEM"
|
|
#define D_STATUS5_NETWORK "NET"
|
|
#define D_STATUS6_MQTT "MQT"
|
|
#define D_STATUS7_TIME "TIM"
|
|
#define D_STATUS8_POWER "PWR"
|
|
#define D_STATUS9_MARGIN "PTH"
|
|
#define D_STATUS10_SENSOR "SNS"
|
|
#define D_STATUS11_STATUS "STS"
|
|
#define D_STATUS12_STATUS "STK"
|
|
#define D_STATUS13_SHUTTER "SHT"
|
|
#define D_CMND_STATE "State"
|
|
#define D_CMND_POWER "Power"
|
|
#define D_CMND_TIMEDPOWER "TimedPower"
|
|
#define D_CMND_POWERLOCK "PowerLock"
|
|
#define D_CMND_FANSPEED "FanSpeed"
|
|
#define D_CMND_POWERONSTATE "PowerOnState"
|
|
#define D_CMND_PULSETIME "PulseTime"
|
|
#define D_CMND_BLINKTIME "BlinkTime"
|
|
#define D_CMND_BLINKCOUNT "BlinkCount"
|
|
#define D_CMND_SETSENSOR "SetSensor"
|
|
#define D_CMND_SENSOR "Sensor"
|
|
#define D_CMND_DRIVER "Driver"
|
|
#define D_CMND_SAVEDATA "SaveData"
|
|
#define D_CMND_SETOPTION "SetOption"
|
|
#define D_CMND_SO "SO"
|
|
#define D_CMND_TEMPERATURE_RESOLUTION "TempRes"
|
|
#define D_CMND_HUMIDITY_RESOLUTION "HumRes"
|
|
#define D_CMND_PRESSURE_RESOLUTION "PressRes"
|
|
#define D_CMND_POWER_RESOLUTION "WattRes"
|
|
#define D_CMND_VOLTAGE_RESOLUTION "VoltRes"
|
|
#define D_CMND_FREQUENCY_RESOLUTION "FreqRes"
|
|
#define D_CMND_CURRENT_RESOLUTION "AmpRes"
|
|
#define D_CMND_ENERGY_RESOLUTION "EnergyRes"
|
|
#define D_CMND_WEIGHT_RESOLUTION "WeightRes"
|
|
#define D_CMND_MODULE "Module"
|
|
#define D_CMND_MODULES "Modules"
|
|
#define D_CMND_ADC "ADC"
|
|
#define D_CMND_ADCS "ADCs"
|
|
#define D_CMND_GPIO "GPIO"
|
|
#define D_JSON_NOT_SUPPORTED "Not supported"
|
|
#define D_CMND_GPIOS "GPIOs"
|
|
#define D_CMND_GPIOREAD "GPIORead"
|
|
#define D_CMND_PWM "PWM"
|
|
#define D_CMND_PWMFREQUENCY "PWMFrequency"
|
|
#define D_CMND_PWMRANGE "PWMRange"
|
|
#define D_CMND_BUTTONDEBOUNCE "ButtonDebounce"
|
|
#define D_CMND_SWITCHDEBOUNCE "SwitchDebounce"
|
|
#define D_CMND_SWITCHTEXT "SwitchText"
|
|
#define D_CMND_SLEEP "Sleep"
|
|
#define D_CMND_UPLOAD "Upload"
|
|
#define D_CMND_UPGRADE "Upgrade"
|
|
#define D_JSON_ONE_OR_GT "1 or >%s to upgrade"
|
|
#define D_CMND_OTAURL "OtaUrl"
|
|
#define D_CMND_HOSTEDOTA "HostedOta"
|
|
#define D_CMND_HOSTEDLOAD "HostedLoad"
|
|
#define D_CMND_SERIALLOG "SerialLog"
|
|
#define D_CMND_SYSLOG "SysLog"
|
|
#define D_CMND_FILELOG "FileLog"
|
|
#define D_CMND_LOGHOST "LogHost"
|
|
#define D_CMND_LOGPORT "LogPort"
|
|
#define D_CMND_IPADDRESS "IPAddress"
|
|
#define D_CMND_NTPSERVER "NtpServer"
|
|
#define D_CMND_AP "Ap"
|
|
#define D_CMND_BSSID "BSSId"
|
|
#define D_CMND_SSID "SSId"
|
|
#define D_CMND_PASSWORD "Password"
|
|
#define D_CMND_HOSTNAME "Hostname"
|
|
#define D_CMND_WIFI "Wifi"
|
|
#define D_CMND_WIFISCAN "WiFiScan"
|
|
#define D_CMND_WIFITEST "WiFiTest"
|
|
#define D_CMND_ETHERNET "Ethernet"
|
|
#define D_CMND_WIFICONFIG "WifiConfig"
|
|
#define D_WCFG_0_RESTART "Restart"
|
|
#define D_WCFG_2_WIFIMANAGER "WifiManager"
|
|
#define D_WCFG_4_RETRY "Retry"
|
|
#define D_WCFG_5_WAIT "Wait"
|
|
#define D_WCFG_6_SERIAL "Serial"
|
|
#define D_WCFG_7_WIFIMANAGER_RESET_ONLY "ManagerRst"
|
|
#define D_CMND_DNSTIMEOUT "DnsTimeout"
|
|
#define D_CMND_DEVICENAME "DeviceName"
|
|
#define D_CMND_FRIENDLYNAME "FriendlyName"
|
|
#define D_CMND_FN "FN"
|
|
#define D_CMND_SWITCHMODE "SwitchMode"
|
|
#define D_CMND_INTERLOCK "Interlock"
|
|
#define D_CMND_TELEPERIOD "TelePeriod"
|
|
#define D_CMND_RESTART "Restart"
|
|
#define D_JSON_ONE_TO_RESTART "1 to restart, 2 to halt"
|
|
#define D_CMND_RESET "Reset"
|
|
#define D_JSON_RESET_AND_RESTARTING "Reset and Restarting"
|
|
#define D_JSON_ONE_TO_RESET "1 to reset"
|
|
#define D_CMND_TIME "Time"
|
|
#define D_CMND_TIMEZONE "Timezone"
|
|
#define D_CMND_TIMESTD "TimeStd"
|
|
#define D_CMND_TIMEDST "TimeDst"
|
|
#define D_CMND_ALTITUDE "Altitude"
|
|
#define D_CMND_LEDPOWER "LedPower"
|
|
#define D_CMND_LEDSTATE "LedState"
|
|
#define D_CMND_LEDMASK "LedMask"
|
|
#define D_CMND_LEDPWM_OFF "LedPwmOff"
|
|
#define D_CMND_LEDPWM_ON "LedPwmOn"
|
|
#define D_CMND_LEDPWM_MODE "LedPwmMode"
|
|
#define D_CMND_WIFIPOWER "WifiPower"
|
|
#define D_CMND_SPEEDUNIT "SpeedUnit"
|
|
#define D_CMND_I2CSCAN "I2CScan"
|
|
#define D_CMND_I2CDRIVER "I2CDriver"
|
|
#define D_CMND_DEVGROUP_NAME "DevGroupName"
|
|
#define D_CMND_DEVGROUP_SEND "DevGroupSend"
|
|
#define D_CMND_DEVGROUP_SHARE "DevGroupShare"
|
|
#define D_CMND_DEVGROUPSTATUS "DevGroupStatus"
|
|
#define D_CMND_DEVGROUP_TIE "DevGroupTie"
|
|
#define D_CMND_SERIALBUFFER "SerialBuffer"
|
|
#define D_CMND_SERIALSEND "SerialSend"
|
|
#define D_CMND_SERIALDELIMITER "SerialDelimiter"
|
|
#define D_CMND_BAUDRATE "Baudrate"
|
|
#define D_CMND_SERIALCONFIG "SerialConfig"
|
|
#define D_CMND_TEMPLATE "Template"
|
|
#define D_JSON_NAME "NAME"
|
|
#define D_JSON_ARCH "ARCH"
|
|
#define D_JSON_GPIO "GPIO"
|
|
#define D_JSON_FLAG "FLAG"
|
|
#define D_JSON_BASE "BASE"
|
|
#define D_JSON_CMND "CMND"
|
|
#define D_JSON_DCDR "DCDR"
|
|
#define D_CMND_TEMPOFFSET "TempOffset"
|
|
#define D_CMND_HUMOFFSET "HumOffset"
|
|
#define D_CMND_GLOBAL_TEMP "GlobalTemp"
|
|
#define D_CMND_GLOBAL_HUM "GlobalHum"
|
|
#define D_CMND_GLOBAL_PRESS "GlobalPress"
|
|
|
|
#define D_SO_WIFINOSLEEP "WifiNoSleep"
|
|
|
|
#ifdef ESP32
|
|
#define D_CMND_TOUCH_CAL "TouchCal"
|
|
#define D_CMND_TOUCH_THRES "TouchThres"
|
|
#define D_CMND_TOUCH_NUM "TouchNum"
|
|
#define D_CMND_CPU_FREQUENCY "CpuFrequency"
|
|
#define D_CMND_LDO "Ldo"
|
|
#endif // ESP32
|
|
|
|
// Commands xdrv_02_mqtt.ino
|
|
#define D_SO_MQTTJSONONLY "MqttJSONOnly"
|
|
#define D_SO_MQTTTLS "MqttTLS"
|
|
#define D_SO_MQTTTLS_FINGERPRINT "MqttTLSFingerprint"
|
|
#define D_SO_MQTTNORETAIN "MqttNoRetain"
|
|
#define D_SO_MQTTDETACHRELAY "MqttDetachRelay"
|
|
#define D_CMND_MQTTLOG "MqttLog"
|
|
#define D_CMND_MQTTHOST "MqttHost"
|
|
#define D_CMND_MQTTPORT "MqttPort"
|
|
#define D_CMND_MQTTRETRY "MqttRetry"
|
|
#define D_CMND_STATETEXT "StateText"
|
|
#define D_CMND_MQTTFINGERPRINT "MqttFingerprint"
|
|
#define D_CMND_MQTTCLIENT "MqttClient"
|
|
#define D_CMND_MQTTUSER "MqttUser"
|
|
#define D_CMND_MQTTPASSWORD "MqttPassword"
|
|
#define D_CMND_MQTTKEEPALIVE "MqttKeepAlive"
|
|
#define D_CMND_MQTTTIMEOUT "MqttTimeout"
|
|
#define D_CMND_MQTTWIFITIMEOUT "MqttWifiTimeout"
|
|
#define D_CMND_TLSKEY "TLSKey"
|
|
#define D_CMND_FULLTOPIC "FullTopic"
|
|
#define D_CMND_PREFIX "Prefix"
|
|
#define D_CMND "cmnd"
|
|
#define D_STAT "stat"
|
|
#define D_TELE "tele"
|
|
#define D_CMND_GROUPTOPIC "GroupTopic"
|
|
#define D_CMND_TOPIC "Topic"
|
|
#define D_CMND_BUTTONTOPIC "ButtonTopic"
|
|
#define D_CMND_SWITCHTOPIC "SwitchTopic"
|
|
#define D_CMND_BUTTONRETAIN "ButtonRetain"
|
|
#define D_CMND_SWITCHRETAIN "SwitchRetain"
|
|
#define D_CMND_POWERRETAIN "PowerRetain"
|
|
#define D_CMND_SENSORRETAIN "SensorRetain"
|
|
#define D_CMND_INFORETAIN "InfoRetain"
|
|
#define D_CMND_STATERETAIN "StateRetain"
|
|
#define D_CMND_STATUSRETAIN "StatusRetain"
|
|
#define D_CMND_PUBLISH "Publish"
|
|
#define D_CMND_FILEUPLOAD "FileUpload"
|
|
#define D_CMND_FILEDOWNLOAD "FileDownload"
|
|
|
|
// Commands xdrv_01_webserver.ino
|
|
#define D_CMND_WEBSERVER "Webserver"
|
|
#define D_JSON_WEBSERVER_MODE "WebServerMode"
|
|
#define D_JSON_ACTIVE_FOR "Active for"
|
|
#define D_JSON_ON_DEVICE "on"
|
|
#define D_JSON_WITH_IP_ADDRESS "with IP address"
|
|
#define D_CMND_WEBPASSWORD "WebPassword"
|
|
#define D_CMND_WEBLOG "WebLog"
|
|
#define D_CMND_WEBREFRESH "WebRefresh"
|
|
#define D_CMND_WEBSEND "WebSend"
|
|
#define D_CMND_WEBQUERY "WebQuery"
|
|
#define D_CMND_WEBCOLOR "WebColor"
|
|
#define D_CMND_WEBBUTTON "WebButton"
|
|
#define D_CMND_WEBCANVAS "WebCanvas"
|
|
#define D_CMND_WEBTIME "WebTime"
|
|
#define D_CMND_WEBSENSOR "WebSensor"
|
|
#define D_CMND_WEBGETCONFIG "WebGetConfig"
|
|
#define D_CMND_WEBRUN "WebRun"
|
|
#define D_CMND_EMULATION "Emulation"
|
|
#define D_CMND_SENDMAIL "Sendmail"
|
|
#define D_CMND_CORS "CORS"
|
|
|
|
// Commands xdrv_03_energy.ino
|
|
#define D_CMND_POWERLOW "PowerLow"
|
|
#define D_CMND_POWERHIGH "PowerHigh"
|
|
#define D_CMND_POWERDELTA "PowerDelta"
|
|
#define D_CMND_VOLTAGELOW "VoltageLow"
|
|
#define D_CMND_VOLTAGEHIGH "VoltageHigh"
|
|
#define D_CMND_CURRENTLOW "CurrentLow"
|
|
#define D_CMND_CURRENTHIGH "CurrentHigh"
|
|
#define D_CMND_ENERGYDISPLAY "EnergyDisplay"
|
|
#define D_CMND_ENERGYCOLS "EnergyCols"
|
|
#define D_CMND_ENERGYTODAY "EnergyToday"
|
|
#define D_CMND_ENERGYYESTERDAY "EnergyYesterday"
|
|
#define D_CMND_ENERGYTOTAL "EnergyTotal"
|
|
#define D_CMND_ENERGYUSAGE "EnergyUsage"
|
|
#define D_CMND_ENERGYEXPORT "EnergyExport"
|
|
#define D_CMND_ENERGYEXPORTACTIVE "EnergyExportActive"
|
|
#define D_CMND_POWERSET "PowerSet"
|
|
#define D_CMND_VOLTAGESET "VoltageSet"
|
|
#define D_CMND_CURRENTSET "CurrentSet"
|
|
#define D_CMND_FREQUENCYSET "FrequencySet"
|
|
#define D_CMND_ENERGYCONFIG "EnergyConfig"
|
|
#define D_CMND_MAXPOWER "MaxPower"
|
|
#define D_CMND_MAXPOWERHOLD "MaxPowerHold"
|
|
#define D_CMND_MAXPOWERWINDOW "MaxPowerWindow"
|
|
#define D_JSON_MAXPOWERREACHED "MaxPowerReached"
|
|
#define D_JSON_MAXPOWERREACHEDRETRY "MaxPowerReachedRetry"
|
|
#define D_CMND_SAFEPOWER "SafePower"
|
|
#define D_CMND_SAFEPOWERHOLD "SafePowerHold"
|
|
#define D_CMND_SAFEPOWERWINDOW "SafePowerWindow"
|
|
#define D_JSON_POWERMONITOR "PowerMonitor"
|
|
#define D_CMND_MAXENERGY "MaxEnergy"
|
|
#define D_CMND_MAXENERGYSTART "MaxEnergyStart"
|
|
#define D_JSON_ENERGYMONITOR "EnergyMonitor"
|
|
#define D_JSON_MAXENERGYREACHED "MaxEnergyReached"
|
|
|
|
// xsns_100_ina3221.ino
|
|
#define D_JSON_CHARGE "Charge"
|
|
|
|
|
|
// Commands xdrv_04_light.ino
|
|
#define D_SO_CHANNELREMAP "ChannelRemap" // SO37
|
|
#define D_SO_MULTIPWM "MultiPWM" // SO68
|
|
#define D_SO_ALEXACTRANGE "AlexaCTRange" // SO82
|
|
#define D_SO_POWERONFADE "PowerOnFade" // SO91
|
|
#define D_SO_PWMCT "PWMCT" // SO92
|
|
#define D_SO_WHITEBLEND "WhiteBlend" // SO105
|
|
#define D_CMND_CHANNEL "Channel"
|
|
#define D_CMND_COLOR "Color"
|
|
#define D_CMND_COLORTEMPERATURE "CT"
|
|
#define D_CMND_DIMMER "Dimmer"
|
|
#define D_CMND_DIMMER_RANGE "DimmerRange"
|
|
#define D_CMND_DIMMER_STEP "DimmerStep"
|
|
#define D_CMND_HSBCOLOR "HSBColor"
|
|
#define D_CMND_VIRTUALCT "VirtualCT"
|
|
#define D_CMND_CTRANGE "CTRange"
|
|
#define D_CMND_LED "Led"
|
|
#define D_CMND_LEDTABLE "LedTable"
|
|
#define D_CMND_FADE "Fade"
|
|
#define D_CMND_PALETTE "Palette"
|
|
#define D_CMND_PIXELS "Pixels"
|
|
#define D_CMND_STEPPIXELS "StepPixels"
|
|
#define D_CMND_PIXELTYPE "PixelType"
|
|
#define D_CMND_ARTNET "ArtNet"
|
|
#define D_CMND_ARTNET_CONFIG "ArtNetConfig"
|
|
#define D_SO_ARTNET_AUTORUN "ArtNetAutorun"
|
|
#define D_CMND_RGBWWTABLE "RGBWWTable"
|
|
#define D_CMND_ROTATION "Rotation"
|
|
#define D_CMND_SCHEME "Scheme"
|
|
#define D_CMND_SEQUENCE_OFFSET "SequenceOffset"
|
|
#define D_CMND_SPEED "Speed"
|
|
#define D_CMND_WAKEUP "Wakeup"
|
|
#define D_CMND_WAKEUPDURATION "WakeUpDuration"
|
|
#define D_CMND_WHITE "White"
|
|
#define D_CMND_WIDTH "Width"
|
|
|
|
// Commands xdrv_05_irremote.ino
|
|
#define D_CMND_IRSEND "IRSend"
|
|
#define D_JSON_INVALID_JSON "Invalid JSON"
|
|
#define D_JSON_INVALID_HEXDATA "Invalid Hex data"
|
|
#define D_JSON_INVALID_RAWDATA "Invalid RawData"
|
|
#define D_JSON_NO_BUFFER_SPACE "No buffer space"
|
|
#define D_JSON_PROTOCOL_NOT_SUPPORTED "Protocol not supported"
|
|
#define D_JSON_IR_PROTOCOL "Protocol"
|
|
#define D_JSON_IR_BITS "Bits"
|
|
#define D_JSON_IR_DATA "Data"
|
|
#define D_JSON_IR_DATALSB "DataLSB"
|
|
#define D_JSON_IR_HASH "Hash"
|
|
#define D_JSON_IR_RAWDATA "RawData"
|
|
#define D_JSON_IR_FREQUENCY "Frequency"
|
|
#define D_JSON_IR_REPEAT "Repeat"
|
|
#define D_JSON_IR_CHANNEL "Channel"
|
|
#define D_CMND_IRHVAC "IRHVAC"
|
|
#define D_JSON_IRHVAC_VENDOR "Vendor"
|
|
#define D_JSON_IRHVAC_PROTOCOL "Protocol"
|
|
#define D_JSON_IRHVAC_MODEL "Model"
|
|
#define D_JSON_IRHVAC_COMMAND "Command"
|
|
#define D_JSON_IRHVAC_POWER "Power"
|
|
#define D_JSON_IRHVAC_MODE "Mode"
|
|
#define D_JSON_IRHVAC_FANSPEED "FanSpeed"
|
|
#define D_JSON_IRHVAC_TEMP "Temp"
|
|
#define D_JSON_IRHVAC_CELSIUS "Celsius"
|
|
#define D_JSON_IRHVAC_SWINGV "SwingV"
|
|
#define D_JSON_IRHVAC_SWINGH "SwingH"
|
|
#define D_JSON_IRHVAC_LIGHT "Light"
|
|
#define D_JSON_IRHVAC_BEEP "Beep"
|
|
#define D_JSON_IRHVAC_ECONO "Econo"
|
|
#define D_JSON_IRHVAC_FILTER "Filter"
|
|
#define D_JSON_IRHVAC_TURBO "Turbo"
|
|
#define D_JSON_IRHVAC_QUIET "Quiet"
|
|
#define D_JSON_IRHVAC_CLEAN "Clean"
|
|
#define D_JSON_IRHVAC_SLEEP "Sleep"
|
|
#define D_JSON_IRHVAC_CLOCK "Clock"
|
|
#define D_JSON_IRHVAC_IFEEL "iFeel"
|
|
#define D_JSON_IRHVAC_CONFIG_KEY "ConfigKey"
|
|
#define D_JSON_IRHVAC_CONFIG_VALUE "ConfigValue"
|
|
#define D_JSON_IRHVAC_SENSOR_TEMP "SensorTemp"
|
|
#define D_JSON_IRHVAC_STATE_MODE "StateMode"
|
|
#define D_JSON_IRHVAC_STATE_MODE_SEND_ONLY "SendOnly"
|
|
#define D_JSON_IRHVAC_STATE_MODE_STORE_ONLY "StoreOnly"
|
|
#define D_JSON_IRHVAC_STATE_MODE_SEND_STORE "SendStore"
|
|
#define D_JSON_IRHVAC_INCREMENTAL "Incremental"
|
|
#define D_JSON_IRRECEIVED "IrReceived"
|
|
|
|
// Commands xdrv_06_snfbridge.ino
|
|
#define D_CMND_PREFIX_RF "Rf"
|
|
#define D_CMND_RFCODE "Code"
|
|
#define D_CMND_RFHIGH "High"
|
|
#define D_CMND_RFHOST "Host"
|
|
#define D_CMND_RFKEY "Key"
|
|
#define D_JSON_START_LEARNING "Start learning"
|
|
#define D_JSON_SET_TO_DEFAULT "Set to default"
|
|
#define D_JSON_DEFAULT_SENT "Default sent"
|
|
#define D_JSON_LEARNED_SENT "Learned sent"
|
|
#define D_JSON_LEARNING_ACTIVE "Learning active"
|
|
#define D_JSON_LEARN_FAILED "Learn failed"
|
|
#define D_JSON_LEARNED "Learned"
|
|
#define D_CMND_RFLOW "Low"
|
|
#define D_CMND_RFSYNC "Sync"
|
|
#define D_JSON_RFRECEIVED "RfReceived"
|
|
#define D_CMND_RFRAW "Raw"
|
|
#define D_CMND_RFTIMEOUT "Timeout"
|
|
|
|
// Commands xdrv_08_serial_bridge.ino
|
|
#define D_CMND_SSERIALSEND "SSerialSend"
|
|
#define D_CMND_SBAUDRATE "SBaudrate"
|
|
#define D_CMND_SSERIALMODE "SSerialMode"
|
|
#define D_CMND_SSERIALBUFFER "SSerialBuffer"
|
|
#define D_CMND_SSERIALCONFIG "SSerialConfig"
|
|
#define D_JSON_SSERIALRECEIVED "SSerialReceived"
|
|
|
|
// Commands xdrv_09_timers.ino
|
|
#define D_CMND_TIMER "Timer"
|
|
#define D_JSON_TIMER_ARM "Enable"
|
|
#define D_JSON_TIMER_MODE "Mode"
|
|
#define D_JSON_TIMER_TIME "Time"
|
|
#define D_JSON_TIMER_WINDOW "Window"
|
|
#define D_JSON_TIMER_DAYS "Days"
|
|
#define D_JSON_TIMER_REPEAT "Repeat"
|
|
#define D_JSON_TIMER_OUTPUT "Output"
|
|
#define D_JSON_TIMER_ACTION "Action"
|
|
#define D_JSON_TIMER_NO_DEVICE "No GPIO as output configured"
|
|
#define D_CMND_TIMERS "Timers"
|
|
#define D_CMND_LATITUDE "Latitude"
|
|
#define D_CMND_LONGITUDE "Longitude"
|
|
#define D_CMND_SUNRISE "Sunrise"
|
|
|
|
// Commands xdrv_23_zigbee.ino
|
|
#define D_PRFX_ZB "Zb"
|
|
#define D_SO_ZIGBEE_NAMEKEY "NameKey"
|
|
#define D_SO_ZIGBEE_DEVICETOPIC "DeviceTopic"
|
|
#define D_SO_ZIGBEE_NOPREFIX "NoPrefix"
|
|
#define D_SO_ZIGBEE_ENDPOINTSUFFIX "EndpointSuffix"
|
|
#define D_SO_ZIGBEE_NOAUTOBIND "NoAutoBind"
|
|
#define D_SO_ZIGBEE_NAMETOPIC "NameTopic"
|
|
#define D_SO_ZIGBEE_ENDPOINTTOPIC "EndpointTopic"
|
|
#define D_SO_ZIGBEE_NOAUTOQUERY "NoAutoQuery"
|
|
#define D_SO_ZIGBEE_ZBRECEIVEDTOPIC "ReceivedTopic"
|
|
#define D_SO_ZIGBEE_OMITDEVICE "OmitDevice"
|
|
#define D_CMND_ZIGBEE_PERMITJOIN "PermitJoin"
|
|
#define D_CMND_ZIGBEE_STATUS "Status"
|
|
#define D_CMND_ZIGBEE_RESET "Reset"
|
|
#define D_JSON_ZIGBEE_CC2530 "CCxxxx"
|
|
#define D_JSON_ZIGBEE_EZSP "EZSP"
|
|
#define D_CMND_ZIGBEEZNPRECEIVE "ZNPReceive" // only for debug
|
|
#define D_CMND_ZIGBEE_EZSP_RECEIVE "EZSPReceive" // only for debug
|
|
#define D_CMND_ZIGBEE_EZSP_RECEIVE_RAW "EZSPReceiveRaw" // only for debug
|
|
#define D_CMND_ZIGBEE_EZSP_LISTEN "Listen" // only for EZSP
|
|
#define D_CMND_ZIGBEEZNPSEND "ZNPSend"
|
|
#define D_CMND_ZIGBEE_EZSP_SEND "EZSPSend"
|
|
#define D_CMND_ZIGBEE_EZSP_SEND_RAW "EZSPSendRaw"
|
|
#define D_JSON_ZIGBEE_STATE "ZbState"
|
|
#define D_JSON_ZIGBEE_ROUTE_ERROR "ZbRouteError"
|
|
#define D_JSON_ZIGBEEZNPRECEIVED "ZbZNPReceived"
|
|
#define D_JSON_ZIGBEE_EZSP_RECEIVED "ZbEZSPReceived"
|
|
#define D_JSON_ZIGBEEZNPSENT "ZbZNPSent"
|
|
#define D_JSON_ZIGBEE_EZSP_SENT "ZbEZSPSent"
|
|
#define D_JSON_ZIGBEE_EZSP_SENT_RAW "ZbEZSPSentRaw"
|
|
#define D_JSON_ZIGBEEZCL_RECEIVED "ZbZCLReceived"
|
|
#define D_JSON_ZIGBEEGP_RECEIVED "ZbGPReceived"
|
|
#define D_JSON_ZIGBEEZCL_RAW_RECEIVED "ZbZCLRawReceived"
|
|
#define D_JSON_ZIGBEE_DEVICE "Device"
|
|
#define D_JSON_ZIGBEE_NAME "Name"
|
|
#define D_JSON_ZIGBEE_NAMES "Names"
|
|
#define D_JSON_ZIGBEE_CONFIRM "ZbConfirm"
|
|
#define D_CMND_ZIGBEE_NAME "Name"
|
|
#define D_CMND_ZIGBEE_MODELID "ModelId"
|
|
#define D_JSON_ZIGBEE_MODELID "ModelId"
|
|
#define D_CMND_ZIGBEE_PROBE "Probe"
|
|
#define D_CMND_ZIGBEE_FORGET "Forget"
|
|
#define D_CMND_ZIGBEE_INFO "Info"
|
|
#define D_CMND_ZIGBEE_SAVE "Save"
|
|
#define D_CMND_ZIGBEE_LINKQUALITY "LinkQuality"
|
|
#define D_CMND_ZIGBEE_CLUSTER "Cluster"
|
|
#define D_CMND_ZIGBEE_BATTPERCENT "BatteryPercentage"
|
|
#define D_CMND_ZIGBEE_ENDPOINT "Endpoint"
|
|
#define D_CMND_ZIGBEE_GROUP "Group"
|
|
#define D_CMND_ZIGBEE_MANUF "Manuf"
|
|
#define D_CMND_ZIGBEE_DEVICE "Device"
|
|
#define D_CMND_ZIGBEE_READ "Read"
|
|
#define D_CMND_ZIGBEE_SEND "Send"
|
|
#define D_CMND_ZIGBEE_WRITE "Write"
|
|
#define D_CMND_ZIGBEE_REPORT "Report"
|
|
#define D_CMND_ZIGBEE_READ_CONFIG "ReadConfig"
|
|
#define D_CMND_ZIGBEE_CONFIG "Config"
|
|
#define D_CMND_ZIGBEE_RESPONSE "Response"
|
|
#define D_JSON_ZIGBEE_ZCL_SENT "ZbZCLSent"
|
|
#define D_JSON_ZIGBEE_RECEIVED "ZbReceived"
|
|
#define D_JSON_ZIGBEE_INFO "ZbInfo"
|
|
#define D_CMND_ZIGBEE_BIND "Bind"
|
|
#define D_JSON_ZIGBEE_BIND "ZbBind"
|
|
#define D_CMND_ZIGBEE_UNBIND "Unbind"
|
|
#define D_JSON_ZIGBEE_UNBIND "ZbUnbind"
|
|
#define D_CMND_ZIGBEE_BIND_STATE "BindState"
|
|
#define D_JSON_ZIGBEE_BIND_STATE "ZbBindState"
|
|
#define D_CMND_ZIGBEE_LEAVE "Leave"
|
|
#define D_CMND_ZIGBEE_MAP "Map"
|
|
#define D_JSON_ZIGBEE_MAP "ZbMap"
|
|
#define D_JSON_ZIGBEE_PARENT "ZbParent"
|
|
#define D_CMND_ZIGBEE_PING "Ping"
|
|
#define D_JSON_ZIGBEE_PING "ZbPing"
|
|
#define D_JSON_ZIGBEE_IEEE "IEEEAddr"
|
|
#define D_JSON_ZIGBEE_RESPONSE "ZbResponse"
|
|
#define D_JSON_ZIGBEE_CMD "Command"
|
|
#define D_JSON_ZIGBEE_STATUS "Status"
|
|
#define D_JSON_ZIGBEE_STATUS_MSG "StatusMessage"
|
|
#define D_CMND_ZIGBEE_LIGHT "Light"
|
|
#define D_JSON_ZIGBEE_LIGHT "Light"
|
|
#define D_CMND_ZIGBEE_OCCUPANCY "Occupancy"
|
|
#define D_JSON_ZIGBEE_OCCUPANCY "Occupancy"
|
|
#define D_CMND_ZIGBEE_RESTORE "Restore"
|
|
#define D_CMND_ZIGBEE_CONFIG "Config"
|
|
#define D_JSON_ZIGBEE_CONFIG "Config"
|
|
#define D_CMND_ZIGBEE_DATA "Data"
|
|
#define D_CMND_ZIGBEE_SCAN "Scan"
|
|
#define D_JSON_ZIGBEE_SCAN "ZbScan"
|
|
#define D_CMND_ZIGBEE_CIE "CIE"
|
|
#define D_CMND_ZIGBEE_EMULATION "Emulation"
|
|
#define D_CMND_ZIGBEE_ENROLL "Enroll"
|
|
#define D_CMND_ZIGBEE_LOAD "Load"
|
|
#define D_CMND_ZIGBEE_LOADDUMP "LoadDump"
|
|
#define D_CMND_ZIGBEE_UNLOAD "Unload"
|
|
#define D_CMND_ZIGBEE_ATTRDUMP "AttrDump"
|
|
|
|
// Commands xdrv_25_A4988_Stepper.ino
|
|
#define D_CMND_MOTOR "MOTOR"
|
|
#define D_JSON_MOTOR_MOVE "doMove"
|
|
#define D_JSON_MOTOR_ROTATE "doRotate"
|
|
#define D_JSON_MOTOR_TURN "doTurn"
|
|
#define D_JSON_MOTOR_SPR "setSPR"
|
|
#define D_JSON_MOTOR_RPM "setRPM"
|
|
#define D_JSON_MOTOR_MIS "setMIS"
|
|
|
|
// Commands xdrv_27_Shutter.ino
|
|
#define D_PRFX_SHUTTER "Shutter"
|
|
#define D_CMND_SHUTTER_OPEN "Open"
|
|
#define D_CMND_SHUTTER_CLOSE "Close"
|
|
#define D_CMND_SHUTTER_TOGGLE "Toggle"
|
|
#define D_CMND_SHUTTER_TOGGLEDIR "ToggleDir"
|
|
#define D_CMND_SHUTTER_UP "Up"
|
|
#define D_CMND_SHUTTER_DOWN "Down"
|
|
#define D_CMND_SHUTTER_MODE "Mode"
|
|
#define D_CMND_SHUTTER_STOPOPEN "StopOpen"
|
|
#define D_CMND_SHUTTER_STOPCLOSE "StopClose"
|
|
#define D_CMND_SHUTTER_STOPTOGGLE "StopToggle"
|
|
#define D_CMND_SHUTTER_STOPTOGGLEDIR "StopToggleDir"
|
|
#define D_CMND_SHUTTER_INCDEC "Change"
|
|
#define D_CMND_SHUTTER_STOPPOSITION "StopPosition"
|
|
#define D_CMND_SHUTTER_STOP "Stop"
|
|
#define D_CMND_SHUTTER_POSITION "Position"
|
|
#define D_CMND_SHUTTER_OPENTIME "OpenDuration"
|
|
#define D_CMND_SHUTTER_CLOSETIME "CloseDuration"
|
|
#define D_CMND_SHUTTER_RELAY "Relay"
|
|
#define D_CMND_SHUTTER_SETHALFWAY "SetHalfway"
|
|
#define D_CMND_SHUTTER_SETCLOSE "SetClose"
|
|
#define D_CMND_SHUTTER_SETOPEN "SetOpen"
|
|
#define D_CMND_SHUTTER_SETPOSITION "SetPosition"
|
|
#define D_CMND_SHUTTER_INVERT "Invert"
|
|
#define D_CMND_SHUTTER_CLIBRATION "Calibration"
|
|
#define D_CMND_SHUTTER_MOTORDELAY "MotorDelay"
|
|
#define D_CMND_SHUTTER_FREQUENCY "Frequency"
|
|
#define D_CMND_SHUTTER_BUTTON "Button"
|
|
#define D_CMND_SHUTTER_LOCK "Lock"
|
|
#define D_CMND_SHUTTER_OPENENDSTOPTIME "OpenEndStopTime"
|
|
#define D_CMND_SHUTTER_CLOSEENDSTOPTIME "CloseEndStopTime"
|
|
#define D_CMND_SHUTTER_INVERTWEBBUTTONS "InvertWebButtons"
|
|
#define D_CMND_SHUTTER_PWMRANGE "PWMRange"
|
|
#define D_CMND_SHUTTER_UNITTEST "UnitTest"
|
|
#define D_CMND_SHUTTER_TILTCONFIG "TiltConfig"
|
|
#define D_CMND_SHUTTER_SETTILT "Tilt"
|
|
#define D_CMND_SHUTTER_TILTINCDEC "TiltChange"
|
|
#define D_CMND_SHUTTER_MOTORSTOP "MotorStop"
|
|
#define D_CMND_SHUTTER_SETUP "Setup"
|
|
#define D_CMD_SHUTTER_EXTRASTOPRELAY "StopRelay"
|
|
|
|
// Commands xdrv_32_hotplug.ino
|
|
#define D_CMND_HOTPLUG "HotPlug"
|
|
|
|
// Commands xdrv_34_pwm_dimmer.ino
|
|
#ifdef USE_PWM_DIMMER
|
|
#define D_CMND_BRI_PRESET "BriPreset"
|
|
#define D_CMND_PWM_DIMMER_PWMS "PWMDimmerPWMs"
|
|
#endif
|
|
|
|
// Commands xdrv_38_ping.ino
|
|
#define D_CMND_PING "Ping"
|
|
#define D_JSON_PING "Ping"
|
|
|
|
// Commands xdrv_42_audio - I2S Audio
|
|
#define D_PRFX_I2S "I2S"
|
|
#define D_JSON_I2S_CONFIG "Config"
|
|
|
|
|
|
// Commands xdrv_52_berry.ino - Berry scripting language
|
|
#define D_PRFX_BR "Br"
|
|
#define D_CMND_BR_RUN ""
|
|
#define D_CMND_BR_RESTART "Restart"
|
|
#define D_BR_NOT_STARTED "Berry not started"
|
|
|
|
// Commands xdrv_60_shift595.ino - 74x595 family shift register driver
|
|
#define D_CMND_SHIFT595_DEVICE_COUNT "Shift595DeviceCount"
|
|
|
|
// Commands xdrv_70_hdmi_cec.ino
|
|
#define D_PRFX_HDMI "Hdmi"
|
|
#define D_CMND_HDMI_SEND "Send"
|
|
#define D_CMND_HDMI_SEND_RAW "SendRaw"
|
|
#define D_CMND_HDMI_TYPE "Type"
|
|
#define D_CMND_HDMI_ADDR "Addr"
|
|
|
|
// Commands xdrv_89_dali.ino
|
|
#define D_CMND_DALI_POWER "power"
|
|
#define D_CMND_DALI_DIMMER "dim"
|
|
|
|
// Commands xsns_02_analog.ino
|
|
#define D_CMND_ADCGPIO "Gpio"
|
|
#define D_CMND_ADCPARAM "Param"
|
|
|
|
// Commands xsns_05_ds18x20.ino
|
|
#define D_CMND_DS_ALIAS "Alias"
|
|
#define D_CMND_DS_RESCAN "Rescan"
|
|
#define D_CMND_DS_RETRYREAD "RetryRead"
|
|
|
|
// xsns_70_veml6075.ino
|
|
#define D_JSON_UVA_INTENSITY "UvaIntensity"
|
|
#define D_JSON_UVB_INTENSITY "UvbIntensity"
|
|
#define D_CMND_VEML6075_POWER "power"
|
|
#define D_CMND_VEML6075_DYNAMIC "dynamic"
|
|
#define D_CMND_VEML6075_INTTIME "inttime"
|
|
|
|
// xsns_71_veml7700.ino
|
|
#define D_JSON_WHITE_CONTENT "WhiteContent"
|
|
|
|
// xdrv_92_pipsolar.ino
|
|
#define D_CMND_PIP_PREFIX "PipSolar"
|
|
#define D_CMND_PIP_QT "QT"
|
|
#define D_CMND_PIP_QET "QET"
|
|
#define D_CMND_PIP_QEY "QEY"
|
|
#define D_CMND_PIP_QEM "QEM"
|
|
#define D_CMND_PIP_QED "QED"
|
|
#define D_CMND_PIP_QEH "QEH"
|
|
#define D_CMND_PIP_DAT "DAT"
|
|
#define D_CMND_PIP_QMOD "QMOD"
|
|
#define D_CMND_PIP_QPIWS "QPIWS"
|
|
#define D_CMND_PIP_QPIRI "QPIRI"
|
|
#define D_CMND_PIP_QPIGS "QPIGS"
|
|
#define D_CMND_PIP_QFLAG "QFLAG"
|
|
#define D_CMND_PIP_CUSTOM "CUSTOM"
|
|
#define D_CMND_PIP_POLLVALUES "PollValues"
|
|
#define D_CMND_PIP_BAUDRATE "BaudRate"
|
|
#define D_CMND_PIP_SERIALCONFIG "SerialConfig"
|
|
|
|
/********************************************************************************************/
|
|
|
|
// Log message prefix
|
|
#define D_LOG_APPLICATION "APP: " // Application
|
|
#define D_LOG_BRIDGE "BRG: " // Bridge
|
|
#define D_LOG_BERRY "BRY: " // Berry scripting language
|
|
#define D_LOG_CONFIG "CFG: " // Settings
|
|
#define D_LOG_COMMAND "CMD: " // Command
|
|
#define D_LOG_DEBUG "DBG: " // Debug
|
|
#define D_LOG_DHT "DHT: " // DHT sensor
|
|
#define D_LOG_DOMOTICZ "DOM: " // Domoticz
|
|
#define D_LOG_DSB "DSB: " // DS18xB20 sensor
|
|
#define D_LOG_ETH "ETH: " // Ethernet
|
|
#define D_LOG_HTTP "HTP: " // HTTP webserver
|
|
#define D_LOG_HRE "HRE: " // Badger HR-E Water Meter
|
|
#define D_LOG_I2C "I2C: " // I2C
|
|
#define D_LOG_IRR "IRR: " // Infra Red Received
|
|
#define D_LOG_KNX "KNX: " // KNX server
|
|
#define D_LOG_LOG "LOG: " // Logging
|
|
#define D_LOG_LVGL "LVG: " // LVGL graphics engine
|
|
#define D_LOG_MODULE "MOD: " // Module
|
|
#define D_LOG_MDNS "mDN: " // mDNS
|
|
#define D_LOG_MQTT "MQT: " // MQTT
|
|
#define D_LOG_OTHER "OTH: " // Other
|
|
#define D_LOG_RESULT "RSL: " // Result
|
|
#define D_LOG_RFR "RFR: " // RF Received
|
|
#define D_LOG_SERIAL "SER: " // Serial
|
|
#define D_LOG_SENSEAIR "SNA: " // Senseair driver
|
|
#define D_LOG_SENSOR "SNS: " // Sensor driver
|
|
#define D_LOG_SHT1 "SHT: " // SHT1x sensor
|
|
#define D_LOG_TCP "TCP: " // TCP bridge
|
|
#define D_LOG_TELNET "TEL: " // Telnet server
|
|
#define D_LOG_THERMOSTAT "THE: " // Thermostat driver
|
|
#define D_LOG_UFS "UFS: " // File system
|
|
#define D_LOG_UPLOAD "UPL: " // Upload
|
|
#define D_LOG_UPNP "UPP: " // UPnP
|
|
#define D_LOG_WIFI "WIF: " // Wifi
|
|
#define D_LOG_ZIGBEE "ZIG: " // Zigbee
|
|
|
|
/********************************************************************************************/
|
|
|
|
#define D_ASTERISK_PWD "****"
|
|
|
|
#ifndef MY_LANGUAGE
|
|
#include "language/en_GB.h"
|
|
#else
|
|
#define QUOTEME(x) QUOTEME_1(x)
|
|
#define QUOTEME_1(x) #x
|
|
#define INCLUDE_FILE(x) QUOTEME(language/x.h)
|
|
#include INCLUDE_FILE(MY_LANGUAGE)
|
|
#endif
|
|
#ifndef LANGUAGE_LCID
|
|
#define LANGUAGE_LCID 2057 // en_GB
|
|
#endif
|
|
|
|
// Common
|
|
const char S_JSON_COMMAND_NVALUE_SPACE_UNIT[] PROGMEM = "{\"%s\":\"%d %s\"}";
|
|
const char S_JSON_COMMAND_LVALUE_SPACE_UNIT[] PROGMEM = "{\"%s\":\"%lu %s\"}";
|
|
const char S_JSON_COMMAND_SVALUE_SPACE_UNIT[] PROGMEM = "{\"%s\":\"%s %s\"}";
|
|
|
|
const char S_JSON_COMMAND_NVALUE_SVALUE[] PROGMEM = "{\"%s\":{\"%d\":\"%s\"}}";
|
|
const char S_JSON_COMMAND_NVALUE_ACTIVE_NVALUE[] PROGMEM = "{\"%s\":{\"%d\":{\"" D_JSON_ACTIVE "\":\"%d\"}}}";
|
|
|
|
const char S_JSON_COMMAND_NVALUE[] PROGMEM = "{\"%s\":%d}";
|
|
const char S_JSON_COMMAND_LVALUE[] PROGMEM = "{\"%s\":%lu}";
|
|
const char S_JSON_COMMAND_SVALUE[] PROGMEM = "{\"%s\":\"%s\"}";
|
|
const char S_JSON_COMMAND_ASTERISK[] PROGMEM = "{\"%s\":\"" D_ASTERISK_PWD "\"}";
|
|
const char S_JSON_COMMAND_XVALUE[] PROGMEM = "{\"%s\":%s}"; // %s must provide quotes on non-number
|
|
|
|
const char S_JSON_COMMAND_INDEX_NVALUE[] PROGMEM = "{\"%s%d\":%d}";
|
|
const char S_JSON_COMMAND_INDEX_LVALUE[] PROGMEM = "{\"%s%d\":%lu}";
|
|
const char S_JSON_COMMAND_INDEX_SVALUE[] PROGMEM = "{\"%s%d\":\"%s\"}";
|
|
const char S_JSON_COMMAND_INDEX_ASTERISK[] PROGMEM = "{\"%s%d\":\"" D_ASTERISK_PWD "\"}";
|
|
|
|
const char S_JSON_SENSOR_INDEX_NVALUE[] PROGMEM = "{\"" D_CMND_SENSOR "%d\":%d}";
|
|
const char S_JSON_SENSOR_INDEX_SVALUE[] PROGMEM = "{\"" D_CMND_SENSOR "%d\":\"%s\"}";
|
|
|
|
const char S_JSON_DRIVER_INDEX_NVALUE[] PROGMEM = "{\"" D_CMND_DRIVER "%d\":%d}";
|
|
const char S_JSON_DRIVER_INDEX_SVALUE[] PROGMEM = "{\"" D_CMND_DRIVER "%d\":\"%s\"}";
|
|
|
|
const char S_JSON_SVALUE_ACTION_SVALUE[] PROGMEM = "{\"%s\":{\"Action\":\"%s\"}}";
|
|
|
|
const char JSON_SNS_F_TEMP[] PROGMEM = ",\"%s\":{\"" D_JSON_TEMPERATURE "\":%*_f}";
|
|
const char JSON_SNS_TEMP[] PROGMEM = ",\"%s\":{\"" D_JSON_TEMPERATURE "\":%s}";
|
|
|
|
const char JSON_SNS_ILLUMINANCE[] PROGMEM = ",\"%s\":{\"" D_JSON_ILLUMINANCE "\":%d}";
|
|
const char JSON_SNS_MOISTURE[] PROGMEM = ",\"%s\":{\"" D_JSON_MOISTURE "\":%d}";
|
|
const char JSON_SNS_RANGE[] PROGMEM = ",\"%s\":{\"" D_JSON_RANGE "\":%d}";
|
|
|
|
const char JSON_SNS_GNGPM[] PROGMEM = ",\"%s\":{\"" D_JSON_TOTAL_USAGE "\":%s,\"" D_JSON_FLOWRATE "\":%s}";
|
|
|
|
const char S_LOG_I2C_FOUND_AT[] PROGMEM = D_LOG_I2C "%s " D_FOUND_AT " 0x%x";
|
|
|
|
const char S_RSLT_POWER[] PROGMEM = D_RSLT_POWER;
|
|
const char S_RSLT_RESULT[] PROGMEM = D_RSLT_RESULT;
|
|
const char S_RSLT_WARNING[] PROGMEM = D_RSLT_WARNING;
|
|
const char S_LWT[] PROGMEM = D_LWT;
|
|
const char S_LWT_OFFLINE[] PROGMEM = MQTT_LWT_OFFLINE;
|
|
|
|
// support.ino
|
|
static const char kMonthNames[] = D_MONTH3LIST;
|
|
|
|
const char kSpeedUnit[] PROGMEM = "|m/s|km/h|kn|mph|ft/s|yd/s";
|
|
const float kSpeedConversionFactor[] = {1, // none
|
|
1, // m/s
|
|
3.6, // km/h
|
|
1.943844492, // kn
|
|
2.236936292, // mph
|
|
3.280839895, // ft/s
|
|
1.093613298 // yd/s
|
|
};
|
|
|
|
// xdrv_02_webserver.ino
|
|
#ifdef USE_WEBSERVER
|
|
// {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
|
|
const char HTTP_SNS_HR[] PROGMEM = "<tr><td colspan=2 style='font-size:2px'><hr></td></tr>";
|
|
const char HTTP_SNS_HR_THIN[] PROGMEM = "<tr><td colspan=2 style='font-size:2px'><hr size=1></td></tr>";
|
|
|
|
const char HTTP_SNS_F_TEMP[] PROGMEM = "{s}%s " D_TEMPERATURE "{m}%*_f " D_UNIT_DEGREE "%c{e}";
|
|
const char HTTP_SNS_F_VOLTAGE[] PROGMEM = "{s}%s " D_VOLTAGE "{m}%*_f " D_UNIT_VOLT "{e}";
|
|
const char HTTP_SNS_F_CURRENT[] PROGMEM = "{s}%s " D_CURRENT "{m}%*_f " D_UNIT_AMPERE "{e}";
|
|
const char HTTP_SNS_F_POWER[] PROGMEM = "{s}%s " D_POWERUSAGE "{m}%*_f " D_UNIT_WATT "{e}";
|
|
const char HTTP_SNS_F_DISTANCE_CM[] PROGMEM = "{s}%s " D_DISTANCE "{m}%1_f " D_UNIT_CENTIMETER "{e}";
|
|
const char HTTP_SNS_F_NOX[] PROGMEM = "{s}%s " D_NOX "{m}%0_f" "{e}";
|
|
const char HTTP_SNS_F_VOC[] PROGMEM = "{s}%s " D_VOC "{m}%0_f" "{e}";
|
|
const char HTTP_SNS_F_CO2[] PROGMEM = "{s}%s " D_CO2 "{m}%0_f " D_UNIT_PARTS_PER_MILLION "{e}";
|
|
const char HTTP_SNS_F_HCHO[] PROGMEM = "{s}%s " D_HCHO "{m}%0_f " D_UNIT_PARTS_PER_BILLION "{e}";
|
|
const char HTTP_SNS_F_ABS_HUM[] PROGMEM = "{s}%s " D_ABSOLUTE_HUMIDITY "{m}%*_f " D_UNIT_GRAM_PER_CUBIC_METER "{e}";
|
|
|
|
const char HTTP_SNS_HUM[] PROGMEM = "{s}%s " D_HUMIDITY "{m}%s " D_UNIT_PERCENT "{e}";
|
|
const char HTTP_SNS_DEW[] PROGMEM = "{s}%s " D_DEWPOINT "{m}%s " D_UNIT_DEGREE "%c{e}";
|
|
const char HTTP_SNS_HEATINDEX[] PROGMEM = "{s}%s " D_HEATINDEX "{m}%s " D_UNIT_DEGREE "%c{e}";
|
|
const char HTTP_SNS_PRESSURE[] PROGMEM = "{s}%s " D_PRESSURE "{m}%s " "%s{e}";
|
|
const char HTTP_SNS_SEAPRESSURE[] PROGMEM = "{s}%s " D_PRESSUREATSEALEVEL "{m}%s " "%s{e}";
|
|
const char HTTP_SNS_ANALOG[] PROGMEM = "{s}%s " D_ANALOG_INPUT "%d{m}%d" "{e}";
|
|
const char HTTP_SNS_ILLUMINANCE[] PROGMEM = "{s}%s " D_ILLUMINANCE "{m}%d " D_UNIT_LUX "{e}";
|
|
const char HTTP_SNS_CO2[] PROGMEM = "{s}%s " D_CO2 "{m}%d " D_UNIT_PARTS_PER_MILLION "{e}";
|
|
const char HTTP_SNS_CO2EAVG[] PROGMEM = "{s}%s " D_ECO2 "{m}%d " D_UNIT_PARTS_PER_MILLION "{e}";
|
|
const char HTTP_SNS_GALLONS[] PROGMEM = "{s}%s " D_TOTAL_USAGE "{m}%s " D_UNIT_GALLONS "{e}";
|
|
const char HTTP_SNS_GPM[] PROGMEM = "{s}%s " D_FLOW_RATE "{m}%s " D_UNIT_GALLONS_PER_MIN "{e}";
|
|
const char HTTP_SNS_MOISTURE[] PROGMEM = "{s}%s " D_MOISTURE "{m}%d " D_UNIT_PERCENT "{e}";
|
|
const char HTTP_SNS_RANGE_CHR[] PROGMEM = "{s}%s " D_RANGE "{m}%s" "{e}";
|
|
const char HTTP_SNS_RANGE[] PROGMEM = "{s}%s " D_RANGE "{m}%d" "{e}";
|
|
const char HTTP_SNS_HALL_EFFECT[] PROGMEM = "{s}%s " D_HALL_EFFECT "{m}%d" "{e}";
|
|
const char HTTP_SNS_PH[] PROGMEM = "{s}%s " D_PH "{m}%s" "{e}";
|
|
const char HTTP_SNS_MQ[] PROGMEM = "{s}" D_MQ "-%s" "{m}%s " D_UNIT_PARTS_PER_MILLION "{e}";
|
|
const char HTTP_SNS_ORP[] PROGMEM = "{s}%s " D_ORP "{m}%s " D_UNIT_MILLIVOLT "{e}";
|
|
const char HTTP_SNS_EC[] PROGMEM = "{s}%s " D_EC "{m}%s " D_UNIT_MICROSIEMENS_PER_CM "{e}";
|
|
const char HTTP_SNS_O2[] PROGMEM = "{s}%s " D_O2 "{m}%s " D_UNIT_PERCENT "{e}";
|
|
const char HTTP_SNS_LITERS[] PROGMEM = "{s}%s " D_VOLUME "{m}%s " D_UNIT_LITERS "{e}";
|
|
const char HTTP_SNS_LPM[] PROGMEM = "{s}%s " D_FLOW_RATE "{m}%s " D_UNIT_LITERS_PER_MIN "{e}";
|
|
const char HTTP_SNS_DO[] PROGMEM = "{s}%s " D_DO "{m}%s " D_UNIT_MILIGRAMS_PER_LITER "{e}";
|
|
const char HTTP_SNS_COLOR_RED[] PROGMEM = "{s}%s " D_COLOR_RED "{m}%u" "{e}";
|
|
const char HTTP_SNS_COLOR_GREEN[] PROGMEM = "{s}%s " D_COLOR_GREEN "{m}%u" "{e}";
|
|
const char HTTP_SNS_COLOR_BLUE[] PROGMEM = "{s}%s " D_COLOR_BLUE "{m}%u" "{e}";
|
|
const char HTTP_SNS_MILLILITERS[] PROGMEM = "{s}%s " D_VOLUME "{m}%s " D_UNIT_MILLILITERS "{e}";
|
|
const char HTTP_SNS_GAS[] PROGMEM = "{s}%s " D_GAS "{m}%d " D_UNIT_PERCENT "LEL{e}";
|
|
const char HTTP_SNS_SOC[] PROGMEM = "{s}%s " D_SOC "{m}%d " D_UNIT_PERCENT "{e}";
|
|
const char HTTP_SNS_SOH[] PROGMEM = "{s}%s " D_SOH "{m}%d " D_UNIT_PERCENT "{e}";
|
|
const char HTTP_SNS_WATER_DEPTH[] PROGMEM = "{s}%s " D_WATER_DEPTH "{m}%s " D_UNIT_CENTIMETER "{e}";
|
|
|
|
const char HTTP_SNS_STANDARD_CONCENTRATION[] PROGMEM = "{s}%s " D_STANDARD_CONCENTRATION " %s " D_UNIT_MICROMETER "{m}%d " D_UNIT_MICROGRAM_PER_CUBIC_METER "{e}";
|
|
const char HTTP_SNS_ENVIRONMENTAL_CONCENTRATION[] PROGMEM = "{s}%s " D_ENVIRONMENTAL_CONCENTRATION " %s " D_UNIT_MICROMETER "{m}%d " D_UNIT_MICROGRAM_PER_CUBIC_METER "{e}";
|
|
const char HTTP_SNS_F_ENVIRONMENTAL_CONCENTRATION[] PROGMEM = "{s}%s " D_ENVIRONMENTAL_CONCENTRATION " %s " D_UNIT_MICROMETER "{m}%1_f " D_UNIT_MICROGRAM_PER_CUBIC_METER "{e}";
|
|
const char HTTP_SNS_PARTICALS_BEYOND[] PROGMEM = "{s}%s " D_PARTICALS_BEYOND " %s " D_UNIT_MICROMETER "{m}%d " D_UNIT_PARTS_PER_DECILITER "{e}";
|
|
const char HTTP_SNS_AVG_RAD_DOSE[] PROGMEM = "{s}%s " D_AVG_RAD_DOSE " %s " D_UNIT_MINUTE "{m}%d.%02d " D_UNIT_US_H "{e}";
|
|
const char HTTP_SNS_US_AQI[] PROGMEM = "{s}%s US AQI" "{m}%d" "{e}";
|
|
const char HTTP_SNS_US_EPA_AQI[] PROGMEM = "{s}%s US EPA AQI" "{m}%d" "{e}";
|
|
|
|
const char HTTP_SNS_VOLTAGE[] PROGMEM = "{s}" D_VOLTAGE "{m}%s " D_UNIT_VOLT "{e}";
|
|
const char HTTP_SNS_CURRENT[] PROGMEM = "{s}" D_CURRENT "{m}%s " D_UNIT_AMPERE "{e}";
|
|
const char HTTP_SNS_CURRENT_N[] PROGMEM = "{s}" D_CURRENT_NEUTRAL "{m}%s " D_UNIT_AMPERE "{e}";
|
|
const char HTTP_SNS_POWER[] PROGMEM = "{s}" D_POWERUSAGE_ACTIVE "{m}%s " D_UNIT_WATT "{e}";
|
|
const char HTTP_SNS_IMPORT_POWER[] PROGMEM = "{s}" D_IMPORT_POWER "{m}%s " D_UNIT_WATT "{e}";
|
|
const char HTTP_SNS_EXPORT_POWER[] PROGMEM = "{s}" D_EXPORT_POWER "{m}%s " D_UNIT_WATT "{e}";
|
|
const char HTTP_SNS_MAX_POWER[] PROGMEM = "{s}" D_MAX_POWER "{m}%s " D_UNIT_WATT "{e}";
|
|
const char HTTP_SNS_POWER_TOTAL[] PROGMEM = "{s}" D_POWERUSAGE_ACTIVE_TOTAL "{m}%s " D_UNIT_WATT "{e}";
|
|
const char HTTP_SNS_POWERUSAGE_APPARENT[] PROGMEM = "{s}" D_POWERUSAGE_APPARENT "{m}%s " D_UNIT_VA "{e}";
|
|
const char HTTP_SNS_POWERUSAGE_REACTIVE[] PROGMEM = "{s}" D_POWERUSAGE_REACTIVE "{m}%s " D_UNIT_VAR "{e}";
|
|
const char HTTP_SNS_POWER_FACTOR[] PROGMEM = "{s}" D_POWER_FACTOR "{m}%s" "{e}";
|
|
const char HTTP_SNS_ENERGY_TODAY[] PROGMEM = "{s}" D_ENERGY_TODAY "{m}%s " D_UNIT_KILOWATTHOUR "{e}";
|
|
const char HTTP_SNS_ENERGY_YESTERDAY[] PROGMEM = "{s}" D_ENERGY_YESTERDAY "{m}%s " D_UNIT_KILOWATTHOUR "{e}";
|
|
const char HTTP_SNS_ENERGY_TOTAL[] PROGMEM = "{s}" D_ENERGY_TOTAL "{m}%s " D_UNIT_KILOWATTHOUR "{e}";
|
|
const char HTTP_SNS_EXPORT_ACTIVE[] PROGMEM = "{s}" D_EXPORT_ACTIVE "{m}%s " D_UNIT_KILOWATTHOUR "{e}";
|
|
const char HTTP_SNS_TOTAL_ACTIVE[] PROGMEM = "{s}" D_TOTAL_ACTIVE "{m}%s " D_UNIT_KILOWATTHOUR "{e}";
|
|
const char HTTP_SNS_RSTTBL_TOTAL_ACTIVE[] PROGMEM = "{s}" D_RESETTABLE_TOTAL_ACTIVE "{m}%s " D_UNIT_KILOWATTHOUR "{e}";
|
|
const char HTTP_SNS_IMPORT_REACTIVE[] PROGMEM = "{s}" D_IMPORT_REACTIVE "{m}%s " D_UNIT_KWARH "{e}";
|
|
const char HTTP_SNS_EXPORT_REACTIVE[] PROGMEM = "{s}" D_EXPORT_REACTIVE "{m}%s " D_UNIT_KWARH "{e}";
|
|
const char HTTP_SNS_TOTAL_REACTIVE[] PROGMEM = "{s}" D_TOTAL_REACTIVE "{m}%s " D_UNIT_KWARH "{e}";
|
|
const char HTTP_SNS_PHASE_ANGLE[] PROGMEM = "{s}" D_PHASE_ANGLE "{m}%s " D_UNIT_ANGLE "{e}";
|
|
const char HTTP_SNS_ADDRESS[] PROGMEM = "{s}" D_ADDRESS "{m}%s" "{e}";
|
|
|
|
#endif // USE_WEBSERVER
|
|
|
|
#endif // _I18N_H_
|