diff --git a/examples/full_buffer/FPS/FPS.ino b/examples/full_buffer/FPS/FPS.ino
index 30c6a19b..e93e8b89 100644
--- a/examples/full_buffer/FPS/FPS.ino
+++ b/examples/full_buffer/FPS/FPS.ino
@@ -191,6 +191,8 @@
 //U8G2_SSD1322_NHD_256X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); 
 //U8G2_SSD1325_NHD_128X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	
+//U8G2_SSD1327_SEEED_96X96_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_F_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -211,12 +213,14 @@
 //U8G2_ST7565_EA_DOGM128_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -236,7 +240,6 @@
 //U8G2_UC1611_EA_DOGXL240_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);   // Due, SW SPI, DOGXL240 Test Board
 //U8G2_SSD1606_172X72_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// eInk/ePaper Display
 
-
 // End of constructor list
 
 typedef u8g2_uint_t u8g_uint_t;
diff --git a/examples/full_buffer/GraphicsTest/GraphicsTest.ino b/examples/full_buffer/GraphicsTest/GraphicsTest.ino
index 9c931db1..6d83d962 100644
--- a/examples/full_buffer/GraphicsTest/GraphicsTest.ino
+++ b/examples/full_buffer/GraphicsTest/GraphicsTest.ino
@@ -75,6 +75,8 @@
 //U8G2_SSD1322_NHD_256X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); 
 //U8G2_SSD1325_NHD_128X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	
+//U8G2_SSD1327_SEEED_96X96_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_F_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -95,12 +97,14 @@
 //U8G2_ST7565_EA_DOGM128_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -120,7 +124,6 @@
 //U8G2_UC1611_EA_DOGXL240_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);   // Due, SW SPI, DOGXL240 Test Board
 //U8G2_SSD1606_172X72_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// eInk/ePaper Display
 
-
 // End of constructor list
 
 
diff --git a/examples/full_buffer/HelloWorld/HelloWorld.ino b/examples/full_buffer/HelloWorld/HelloWorld.ino
index 87f2b431..a81cf300 100644
--- a/examples/full_buffer/HelloWorld/HelloWorld.ino
+++ b/examples/full_buffer/HelloWorld/HelloWorld.ino
@@ -74,6 +74,8 @@
 //U8G2_SSD1322_NHD_256X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); 
 //U8G2_SSD1325_NHD_128X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	
+//U8G2_SSD1327_SEEED_96X96_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_F_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -94,12 +96,14 @@
 //U8G2_ST7565_EA_DOGM128_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -119,7 +123,6 @@
 //U8G2_UC1611_EA_DOGXL240_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);   // Due, SW SPI, DOGXL240 Test Board
 //U8G2_SSD1606_172X72_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// eInk/ePaper Display
 
-
 // End of constructor list
 
 
@@ -132,6 +135,6 @@ void loop(void) {
   u8g2.setFont(u8g2_font_ncenB14_tr);	// choose a suitable font
   u8g2.drawStr(0,20,"Hello World!");	// write something to the internal memory
   u8g2.sendBuffer();					// transfer internal memory to the display
-  delay(1000);
+  delay(1000);  
 }
 
diff --git a/examples/full_buffer/PrintUTF8/PrintUTF8.ino b/examples/full_buffer/PrintUTF8/PrintUTF8.ino
index 2539874c..38192625 100644
--- a/examples/full_buffer/PrintUTF8/PrintUTF8.ino
+++ b/examples/full_buffer/PrintUTF8/PrintUTF8.ino
@@ -77,6 +77,8 @@
 //U8G2_SSD1322_NHD_256X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); 
 //U8G2_SSD1325_NHD_128X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	
+//U8G2_SSD1327_SEEED_96X96_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_F_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -97,12 +99,14 @@
 //U8G2_ST7565_EA_DOGM128_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -122,7 +126,6 @@
 //U8G2_UC1611_EA_DOGXL240_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);   // Due, SW SPI, DOGXL240 Test Board
 //U8G2_SSD1606_172X72_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// eInk/ePaper Display
 
-
 // End of constructor list
 
 
diff --git a/examples/full_buffer/SelectionList/SelectionList.ino b/examples/full_buffer/SelectionList/SelectionList.ino
index a20a8470..d64baab3 100644
--- a/examples/full_buffer/SelectionList/SelectionList.ino
+++ b/examples/full_buffer/SelectionList/SelectionList.ino
@@ -74,6 +74,8 @@
 //U8G2_SSD1322_NHD_256X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); 
 //U8G2_SSD1325_NHD_128X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	
+//U8G2_SSD1327_SEEED_96X96_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_F_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -94,12 +96,14 @@
 //U8G2_ST7565_EA_DOGM128_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -119,7 +123,6 @@
 //U8G2_UC1611_EA_DOGXL240_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);   // Due, SW SPI, DOGXL240 Test Board
 //U8G2_SSD1606_172X72_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// eInk/ePaper Display
 
-
 // End of constructor list
 
 
diff --git a/examples/full_buffer/U8g2Logo/U8g2Logo.ino b/examples/full_buffer/U8g2Logo/U8g2Logo.ino
index ef9b9880..dc97865f 100644
--- a/examples/full_buffer/U8g2Logo/U8g2Logo.ino
+++ b/examples/full_buffer/U8g2Logo/U8g2Logo.ino
@@ -75,6 +75,8 @@
 //U8G2_SSD1322_NHD_256X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); 
 //U8G2_SSD1325_NHD_128X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	
+//U8G2_SSD1327_SEEED_96X96_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_F_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -95,12 +97,14 @@
 //U8G2_ST7565_EA_DOGM128_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -120,7 +124,6 @@
 //U8G2_UC1611_EA_DOGXL240_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);   // Due, SW SPI, DOGXL240 Test Board
 //U8G2_SSD1606_172X72_F_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// eInk/ePaper Display
 
-
 // End of constructor list
 
 //#define MINI_LOGO
diff --git a/examples/page_buffer/ContrastTest/ContrastTest.ino b/examples/page_buffer/ContrastTest/ContrastTest.ino
index 7c396e35..fbf9940d 100644
--- a/examples/page_buffer/ContrastTest/ContrastTest.ino
+++ b/examples/page_buffer/ContrastTest/ContrastTest.ino
@@ -76,6 +76,8 @@
 //U8G2_SSD1322_NHD_256X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_SSD1325_NHD_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_SSD1327_SEEED_96X96_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_1_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -96,12 +98,14 @@
 //U8G2_ST7565_EA_DOGM128_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);			// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -124,8 +128,6 @@
 
 
 
-
-
 // End of constructor list
 
 
diff --git a/examples/page_buffer/DirectAccess/DirectAccess.ino b/examples/page_buffer/DirectAccess/DirectAccess.ino
index c750ef97..e9814cff 100644
--- a/examples/page_buffer/DirectAccess/DirectAccess.ino
+++ b/examples/page_buffer/DirectAccess/DirectAccess.ino
@@ -80,6 +80,8 @@
 //U8G2_SSD1322_NHD_256X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_SSD1325_NHD_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_SSD1327_SEEED_96X96_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_1_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -100,12 +102,14 @@
 //U8G2_ST7565_EA_DOGM128_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);			// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -128,8 +132,6 @@
 
 
 
-
-
 // End of constructor list
 
 uint8_t background_images[8][32];
diff --git a/examples/page_buffer/ExtUTF8/ExtUTF8.ino b/examples/page_buffer/ExtUTF8/ExtUTF8.ino
index 3d869d1a..42c3cdbd 100644
--- a/examples/page_buffer/ExtUTF8/ExtUTF8.ino
+++ b/examples/page_buffer/ExtUTF8/ExtUTF8.ino
@@ -76,6 +76,8 @@
 //U8G2_SSD1322_NHD_256X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_SSD1325_NHD_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_SSD1327_SEEED_96X96_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_1_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -96,12 +98,14 @@
 //U8G2_ST7565_EA_DOGM128_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);			// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -124,8 +128,6 @@
 
 
 
-
-
 // End of constructor list
 
 void setup(void) {
diff --git a/examples/page_buffer/FPS/FPS.ino b/examples/page_buffer/FPS/FPS.ino
index d6426179..502d6caf 100644
--- a/examples/page_buffer/FPS/FPS.ino
+++ b/examples/page_buffer/FPS/FPS.ino
@@ -222,6 +222,8 @@
 //U8G2_SSD1322_NHD_256X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_SSD1325_NHD_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_SSD1327_SEEED_96X96_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_1_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -242,12 +244,14 @@
 //U8G2_ST7565_EA_DOGM128_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);			// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -270,8 +274,6 @@
 
 
 
-
-
 // End of constructor list
 
 typedef u8g2_uint_t u8g_uint_t;
diff --git a/examples/page_buffer/FlipMode/FlipMode.ino b/examples/page_buffer/FlipMode/FlipMode.ino
index 4f6e9597..d2115d61 100644
--- a/examples/page_buffer/FlipMode/FlipMode.ino
+++ b/examples/page_buffer/FlipMode/FlipMode.ino
@@ -71,6 +71,8 @@
 //U8G2_SSD1322_NHD_256X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_SSD1325_NHD_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_SSD1327_SEEED_96X96_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_1_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -91,12 +93,14 @@
 //U8G2_ST7565_EA_DOGM128_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);			// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -119,8 +123,6 @@
 
 
 
-
-
 // End of constructor list
 
 
diff --git a/examples/page_buffer/GraphicsTest/GraphicsTest.ino b/examples/page_buffer/GraphicsTest/GraphicsTest.ino
index 56f7acfb..0afff8d8 100644
--- a/examples/page_buffer/GraphicsTest/GraphicsTest.ino
+++ b/examples/page_buffer/GraphicsTest/GraphicsTest.ino
@@ -75,7 +75,9 @@
 //U8G2_SSD1322_NHD_256X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1322_NHD_256X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_SSD1325_NHD_128X64_1_4W_HW_SPI u8g2(U8G2_R2, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_SSD1325_NHD_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_SSD1327_SEEED_96X96_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_1_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -96,12 +98,14 @@
 //U8G2_ST7565_EA_DOGM128_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);			// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -124,8 +128,6 @@
 
 
 
-
-
 // End of constructor list
 
 
@@ -137,6 +139,13 @@ void u8g2_prepare(void) {
   u8g2.setFontDirection(0);
 }
 
+void u8g2_box_title(uint8_t a) {
+  u8g2.drawStr( 10+a*2, 5, "U8g2");
+  u8g2.drawStr( 10, 20, "GraphicsTest");
+  
+  u8g2.drawFrame(0,0,u8g2.getDisplayWidth(),u8g2.getDisplayHeight() );
+}
+
 void u8g2_box_frame(uint8_t a) {
   u8g2.drawStr( 0, 0, "drawBox");
   u8g2.drawBox(5,10,20,10);
@@ -241,15 +250,16 @@ uint8_t draw_state = 0;
 void draw(void) {
   u8g2_prepare();
   switch(draw_state >> 3) {
-    case 0: u8g2_box_frame(draw_state&7); break;
-    case 1: u8g2_disc_circle(draw_state&7); break;
-    case 2: u8g2_r_frame(draw_state&7); break;
-    case 3: u8g2_string(draw_state&7); break;
-    case 4: u8g2_line(draw_state&7); break;
-    case 5: u8g2_triangle(draw_state&7); break;
-    case 6: u8g2_ascii_1(); break;
-    case 7: u8g2_ascii_2(); break;
-    case 8: u8g2_extra_page(draw_state&7); break;
+    case 0: u8g2_box_title(draw_state&7); break;
+    case 1: u8g2_box_frame(draw_state&7); break;
+    case 2: u8g2_disc_circle(draw_state&7); break;
+    case 3: u8g2_r_frame(draw_state&7); break;
+    case 4: u8g2_string(draw_state&7); break;
+    case 5: u8g2_line(draw_state&7); break;
+    case 6: u8g2_triangle(draw_state&7); break;
+    case 7: u8g2_ascii_1(); break;
+    case 8: u8g2_ascii_2(); break;
+    case 9: u8g2_extra_page(draw_state&7); break;
   }
 }
 
@@ -283,7 +293,7 @@ void loop(void) {
   
   // increase the state
   draw_state++;
-  if ( draw_state >= 9*8 )
+  if ( draw_state >= 10*8 )
     draw_state = 0;
 
   // delay between each page
diff --git a/examples/page_buffer/HelloWorld/HelloWorld.ino b/examples/page_buffer/HelloWorld/HelloWorld.ino
index f789f99a..1bf9fa1d 100644
--- a/examples/page_buffer/HelloWorld/HelloWorld.ino
+++ b/examples/page_buffer/HelloWorld/HelloWorld.ino
@@ -76,6 +76,8 @@
 //U8G2_SSD1322_NHD_256X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_SSD1325_NHD_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_SSD1327_SEEED_96X96_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_1_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -96,12 +98,14 @@
 //U8G2_ST7565_EA_DOGM128_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);			// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -124,8 +128,6 @@
 
 
 
-
-
 // End of constructor list
 
 void setup(void) {
diff --git a/examples/page_buffer/PrintHelloWorld/PrintHelloWorld.ino b/examples/page_buffer/PrintHelloWorld/PrintHelloWorld.ino
index 1cbe9cd5..5af8fc27 100644
--- a/examples/page_buffer/PrintHelloWorld/PrintHelloWorld.ino
+++ b/examples/page_buffer/PrintHelloWorld/PrintHelloWorld.ino
@@ -77,6 +77,8 @@
 //U8G2_SSD1322_NHD_256X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_SSD1325_NHD_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_SSD1327_SEEED_96X96_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_1_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -97,12 +99,14 @@
 //U8G2_ST7565_EA_DOGM128_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);			// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -125,8 +129,6 @@
 
 
 
-
-
 // End of constructor list
 
 
diff --git a/examples/page_buffer/PrintUTF8/PrintUTF8.ino b/examples/page_buffer/PrintUTF8/PrintUTF8.ino
index d6ecbcca..cd33194f 100644
--- a/examples/page_buffer/PrintUTF8/PrintUTF8.ino
+++ b/examples/page_buffer/PrintUTF8/PrintUTF8.ino
@@ -77,6 +77,8 @@
 //U8G2_SSD1322_NHD_256X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_SSD1325_NHD_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_SSD1327_SEEED_96X96_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_1_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -97,12 +99,14 @@
 //U8G2_ST7565_EA_DOGM128_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);			// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -125,8 +129,6 @@
 
 
 
-
-
 // End of constructor list
 
 
diff --git a/examples/page_buffer/ScrollingText/ScrollingText.ino b/examples/page_buffer/ScrollingText/ScrollingText.ino
index 047e1f6a..57482b57 100644
--- a/examples/page_buffer/ScrollingText/ScrollingText.ino
+++ b/examples/page_buffer/ScrollingText/ScrollingText.ino
@@ -77,6 +77,8 @@
 //U8G2_SSD1322_NHD_256X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_SSD1325_NHD_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_SSD1327_SEEED_96X96_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_1_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -97,12 +99,14 @@
 //U8G2_ST7565_EA_DOGM128_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);			// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -125,8 +129,6 @@
 
 
 
-
-
 // End of constructor list
 
 
diff --git a/examples/page_buffer/SelectionList/SelectionList.ino b/examples/page_buffer/SelectionList/SelectionList.ino
index 342c35cf..61a7eb84 100644
--- a/examples/page_buffer/SelectionList/SelectionList.ino
+++ b/examples/page_buffer/SelectionList/SelectionList.ino
@@ -66,6 +66,8 @@
 //U8G2_SSD1322_NHD_256X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_SSD1325_NHD_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_SSD1327_SEEED_96X96_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8G2_SSD1327_SEEED_96X96_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_1_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -86,12 +88,14 @@
 //U8G2_ST7565_EA_DOGM128_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);			// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -114,8 +118,6 @@
 
 
 
-
-
 // End of constructor list
 
 
diff --git a/examples/page_buffer/U8g2Logo/U8g2Logo.ino b/examples/page_buffer/U8g2Logo/U8g2Logo.ino
index ff5257d0..70712490 100644
--- a/examples/page_buffer/U8g2Logo/U8g2Logo.ino
+++ b/examples/page_buffer/U8g2Logo/U8g2Logo.ino
@@ -75,6 +75,8 @@
 //U8G2_SSD1322_NHD_256X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Enable U8G2_16BIT in u8g2.h
 //U8G2_SSD1325_NHD_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_SSD1325_NHD_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_SSD1327_SEEED_96X96_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+U8G2_SSD1327_SEEED_96X96_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8G2_LD7032_60X32_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8);	// SW SPI Nano Board
 //U8G2_LD7032_60X32_1_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE);	// NOT TESTED!
 //U8G2_UC1701_EA_DOGS102_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -95,12 +97,14 @@
 //U8G2_ST7565_EA_DOGM128_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_ZOLEN_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8G2_ST7565_LM6059_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
+//U8G2_ST7565_LM6059_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);			// Adafruit ST7565 GLCD
 //U8G2_ST7565_NHD_C12832_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7565_NHD_C12832_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8G2_ST7567_PI_132X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8G2_ST7567_PI_132X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8G2_NT7534_TG12864R_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8G2_NT7534_TG12864R_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
@@ -123,8 +127,6 @@
 
 
 
-
-
 // End of constructor list
 
 //#define MINI_LOGO
diff --git a/examples/u8x8/FlipMode/FlipMode.ino b/examples/u8x8/FlipMode/FlipMode.ino
index 5536b219..1aef94f9 100644
--- a/examples/u8x8/FlipMode/FlipMode.ino
+++ b/examples/u8x8/FlipMode/FlipMode.ino
@@ -67,6 +67,8 @@
 //U8X8_SSD1322_NHD_256X64_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_SSD1325_NHD_128X64_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_SSD1325_NHD_128X64_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	
+//U8X8_SSD1327_SEEED_96X96_SW_I2C u8x8(/* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8X8_SSD1327_SEEED_96X96_HW_I2C u8x8(/* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8X8_KS0108_128X64 u8x8(8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*dc=*/ 17, /*cs0=*/ 14, /*cs1=*/ 15, /*cs2=*/ U8X8_PIN_NONE, /* reset=*/  U8X8_PIN_NONE); 	// Set R/W to low!
 //U8X8_KS0108_ERM19264 u8x8(8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*dc=*/ 17, /*cs0=*/ 14, /*cs1=*/ 15, /*cs2=*/ 16, /* reset=*/  U8X8_PIN_NONE); 	// Set R/W to low!
 //U8X8_UC1701_EA_DOGS102_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -79,12 +81,14 @@
 //U8X8_ST7565_EA_DOGM128_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7565_ZOLEN_128X64_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7565_ZOLEN_128X64_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8X8_ST7565_LM6059_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8X8_ST7565_LM6059_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8X8_ST7565_LM6059_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Adafruit ST7565 GLCD
+//U8X8_ST7565_LM6059_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
 //U8X8_ST7565_NHD_C12832_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7565_NHD_C12832_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7567_PI_132X64_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8X8_ST7567_PI_132X64_4W_HW_SPI u8x8(/* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8X8_NT7534_TG12864R_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8X8_NT7534_TG12864R_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8X8_UC1604_JLX19264_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); 
 //U8X8_UC1604_JLX19264_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8X8_UC1608_ERC24064_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  // Due, SW SPI, ERC24064-1 Test Board 
@@ -97,7 +101,6 @@
 //U8X8_UC1611_EA_DOGXL240_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  // SW SPI, Due DOGXL240 Test Board
 //U8X8_SSD1606_172X72_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// eInk/ePaper Display
 
-
 // End of constructor list
 
 void setup(void)
diff --git a/examples/u8x8/GraphicsTest/GraphicsTest.ino b/examples/u8x8/GraphicsTest/GraphicsTest.ino
index a67801ec..f06252d1 100644
--- a/examples/u8x8/GraphicsTest/GraphicsTest.ino
+++ b/examples/u8x8/GraphicsTest/GraphicsTest.ino
@@ -69,6 +69,8 @@
 //U8X8_SSD1322_NHD_256X64_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_SSD1325_NHD_128X64_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_SSD1325_NHD_128X64_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	
+//U8X8_SSD1327_SEEED_96X96_SW_I2C u8x8(/* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8X8_SSD1327_SEEED_96X96_HW_I2C u8x8(/* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8X8_KS0108_128X64 u8x8(8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*dc=*/ 17, /*cs0=*/ 14, /*cs1=*/ 15, /*cs2=*/ U8X8_PIN_NONE, /* reset=*/  U8X8_PIN_NONE); 	// Set R/W to low!
 //U8X8_KS0108_ERM19264 u8x8(8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*dc=*/ 17, /*cs0=*/ 14, /*cs1=*/ 15, /*cs2=*/ 16, /* reset=*/  U8X8_PIN_NONE); 	// Set R/W to low!
 //U8X8_UC1701_EA_DOGS102_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -81,12 +83,14 @@
 //U8X8_ST7565_EA_DOGM128_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7565_ZOLEN_128X64_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7565_ZOLEN_128X64_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8X8_ST7565_LM6059_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8X8_ST7565_LM6059_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8X8_ST7565_LM6059_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Adafruit ST7565 GLCD
+//U8X8_ST7565_LM6059_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
 //U8X8_ST7565_NHD_C12832_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7565_NHD_C12832_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7567_PI_132X64_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8X8_ST7567_PI_132X64_4W_HW_SPI u8x8(/* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8X8_NT7534_TG12864R_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8X8_NT7534_TG12864R_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8X8_UC1604_JLX19264_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); 
 //U8X8_UC1604_JLX19264_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8X8_UC1608_ERC24064_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  // Due, SW SPI, ERC24064-1 Test Board 
@@ -99,7 +103,6 @@
 //U8X8_UC1611_EA_DOGXL240_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  // SW SPI, Due DOGXL240 Test Board
 //U8X8_SSD1606_172X72_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// eInk/ePaper Display
 
-
 // End of constructor list
 
 
@@ -177,9 +180,9 @@ void loop(void)
   u8x8.refreshDisplay();		// for SSD1606
   delay(2000);
    
+  pre();
   for( i = 19; i > 0; i-- )
   {
-    pre();
     u8x8.setCursor(3,2);
     u8x8.print(i);
     u8x8.print("  ");
diff --git a/examples/u8x8/HelloWorld/HelloWorld.ino b/examples/u8x8/HelloWorld/HelloWorld.ino
index b758e99a..4d04c405 100644
--- a/examples/u8x8/HelloWorld/HelloWorld.ino
+++ b/examples/u8x8/HelloWorld/HelloWorld.ino
@@ -66,6 +66,8 @@
 //U8X8_SSD1322_NHD_256X64_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_SSD1325_NHD_128X64_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_SSD1325_NHD_128X64_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	
+//U8X8_SSD1327_SEEED_96X96_SW_I2C u8x8(/* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8X8_SSD1327_SEEED_96X96_HW_I2C u8x8(/* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8X8_KS0108_128X64 u8x8(8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*dc=*/ 17, /*cs0=*/ 14, /*cs1=*/ 15, /*cs2=*/ U8X8_PIN_NONE, /* reset=*/  U8X8_PIN_NONE); 	// Set R/W to low!
 //U8X8_KS0108_ERM19264 u8x8(8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*dc=*/ 17, /*cs0=*/ 14, /*cs1=*/ 15, /*cs2=*/ 16, /* reset=*/  U8X8_PIN_NONE); 	// Set R/W to low!
 //U8X8_UC1701_EA_DOGS102_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -78,12 +80,14 @@
 //U8X8_ST7565_EA_DOGM128_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7565_ZOLEN_128X64_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7565_ZOLEN_128X64_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8X8_ST7565_LM6059_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8X8_ST7565_LM6059_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8X8_ST7565_LM6059_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Adafruit ST7565 GLCD
+//U8X8_ST7565_LM6059_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
 //U8X8_ST7565_NHD_C12832_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7565_NHD_C12832_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7567_PI_132X64_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8X8_ST7567_PI_132X64_4W_HW_SPI u8x8(/* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8X8_NT7534_TG12864R_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8X8_NT7534_TG12864R_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8X8_UC1604_JLX19264_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); 
 //U8X8_UC1604_JLX19264_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8X8_UC1608_ERC24064_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  // Due, SW SPI, ERC24064-1 Test Board 
@@ -96,7 +100,6 @@
 //U8X8_UC1611_EA_DOGXL240_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  // SW SPI, Due DOGXL240 Test Board
 //U8X8_SSD1606_172X72_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// eInk/ePaper Display
 
-
 // End of constructor list
 
 void setup(void)
diff --git a/examples/u8x8/MessageBox/MessageBox.ino b/examples/u8x8/MessageBox/MessageBox.ino
index aa5edbea..c577ba8f 100644
--- a/examples/u8x8/MessageBox/MessageBox.ino
+++ b/examples/u8x8/MessageBox/MessageBox.ino
@@ -66,6 +66,8 @@
 //U8X8_SSD1322_NHD_256X64_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_SSD1325_NHD_128X64_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_SSD1325_NHD_128X64_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	
+//U8X8_SSD1327_SEEED_96X96_SW_I2C u8x8(/* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
+//U8X8_SSD1327_SEEED_96X96_HW_I2C u8x8(/* reset=*/ U8X8_PIN_NONE);	// Seeedstudio Grove OLED 96x96
 //U8X8_KS0108_128X64 u8x8(8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*dc=*/ 17, /*cs0=*/ 14, /*cs1=*/ 15, /*cs2=*/ U8X8_PIN_NONE, /* reset=*/  U8X8_PIN_NONE); 	// Set R/W to low!
 //U8X8_KS0108_ERM19264 u8x8(8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*dc=*/ 17, /*cs0=*/ 14, /*cs1=*/ 15, /*cs2=*/ 16, /* reset=*/  U8X8_PIN_NONE); 	// Set R/W to low!
 //U8X8_UC1701_EA_DOGS102_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
@@ -78,12 +80,14 @@
 //U8X8_ST7565_EA_DOGM128_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7565_ZOLEN_128X64_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7565_ZOLEN_128X64_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8X8_ST7565_LM6059_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8X8_ST7565_LM6059_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
+//U8X8_ST7565_LM6059_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// Adafruit ST7565 GLCD
+//U8X8_ST7565_LM6059_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// Adafruit ST7565 GLCD
 //U8X8_ST7565_NHD_C12832_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7565_NHD_C12832_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
 //U8X8_ST7567_PI_132X64_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
 //U8X8_ST7567_PI_132X64_4W_HW_SPI u8x8(/* cs=*/ 7, /* dc=*/ 9, /* reset=*/ 8);  // Pax Instruments Shield, LCD_BL=6
+//U8X8_NT7534_TG12864R_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
+//U8X8_NT7534_TG12864R_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8X8_UC1604_JLX19264_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); 
 //U8X8_UC1604_JLX19264_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  
 //U8X8_UC1608_ERC24064_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  // Due, SW SPI, ERC24064-1 Test Board 
@@ -96,7 +100,6 @@
 //U8X8_UC1611_EA_DOGXL240_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);  // SW SPI, Due DOGXL240 Test Board
 //U8X8_SSD1606_172X72_4W_SW_SPI u8x8(/* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);	// eInk/ePaper Display
 
-
 // End of constructor list
 
 void setup(void)
diff --git a/extras/ChangeLog b/extras/ChangeLog
index a6fb722c..9e35ce57 100644
--- a/extras/ChangeLog
+++ b/extras/ChangeLog
@@ -78,10 +78,12 @@ https://github.com/olikraus/u8g2 ChangeLog
   * ST7565 LM6059 Display (issue 123)
   * SSD1606 eInk/ePaper Display (issue 100)
   * Documentation updates
-2016-1-xx	v2.11.x	 olikraus@gmail.com
+2017-01-xx	v2.11.x	 olikraus@gmail.com
   * Support for LC7981 (issue 134)
   * Support for PCF8812 (issue 135)
-  * Support for ST7567, Pax Instruments GLCD Shield (issue 138)
   * Fixed wrong half-move notation in Little Rook Chess (issue 137)
+  * Support for ST7567, Pax Instruments GLCD Shield (issue 138)
+  * Support for NT7534 (issue 143)
+  * Support for SSD1327, Seeedstudio OLED (issue 145)
   
   
diff --git a/library.properties b/library.properties
index 53bfd564..6f40088d 100644
--- a/library.properties
+++ b/library.properties
@@ -1,5 +1,5 @@
 name=U8g2
-version=2.11.0
+version=2.11.1
 author=oliver <olikraus@gmail.com>
 maintainer=oliver <olikraus@gmail.com>
 sentence=Monochrome LCD, OLED and eInk Library. Display controller: SSD1306, SSD1322, SSD1325, SSD1327, SSD1606, SH1106, T6963, RA8835, LC7981, PCD8544, PCF8812, UC1604, UC1608, UC1610, UC1611, UC1701, ST7565, ST7567, NT7534, ST7920, LD7032, KS0108. Interfaces: I2C, SPI, Parallel.
diff --git a/src/U8g2lib.h b/src/U8g2lib.h
index 3b277fd0..47356bf4 100644
--- a/src/U8g2lib.h
+++ b/src/U8g2lib.h
@@ -1260,6 +1260,204 @@ class U8G2_SSD1325_NHD_128X64_F_8080 : public U8G2 {
     u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
   }
 };
+class U8G2_SSD1325_NHD_128X64_1_SW_I2C : public U8G2 {
+  public: U8G2_SSD1325_NHD_128X64_1_SW_I2C(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1325_i2c_nhd_128x64_1(&u8g2, rotation, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SW_I2C(getU8x8(), clock,  data,  reset);
+  }
+};
+class U8G2_SSD1325_NHD_128X64_1_HW_I2C : public U8G2 {
+  public: U8G2_SSD1325_NHD_128X64_1_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1325_i2c_nhd_128x64_1(&u8g2, rotation, u8x8_byte_arduino_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
+class U8G2_SSD1325_NHD_128X64_1_2ND_HW_I2C : public U8G2 {
+  public: U8G2_SSD1325_NHD_128X64_1_2ND_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1325_i2c_nhd_128x64_1(&u8g2, rotation, u8x8_byte_arduino_2nd_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
+class U8G2_SSD1325_NHD_128X64_2_SW_I2C : public U8G2 {
+  public: U8G2_SSD1325_NHD_128X64_2_SW_I2C(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1325_i2c_nhd_128x64_2(&u8g2, rotation, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SW_I2C(getU8x8(), clock,  data,  reset);
+  }
+};
+class U8G2_SSD1325_NHD_128X64_2_HW_I2C : public U8G2 {
+  public: U8G2_SSD1325_NHD_128X64_2_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1325_i2c_nhd_128x64_2(&u8g2, rotation, u8x8_byte_arduino_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
+class U8G2_SSD1325_NHD_128X64_2_2ND_HW_I2C : public U8G2 {
+  public: U8G2_SSD1325_NHD_128X64_2_2ND_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1325_i2c_nhd_128x64_2(&u8g2, rotation, u8x8_byte_arduino_2nd_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
+class U8G2_SSD1325_NHD_128X64_F_SW_I2C : public U8G2 {
+  public: U8G2_SSD1325_NHD_128X64_F_SW_I2C(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1325_i2c_nhd_128x64_f(&u8g2, rotation, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SW_I2C(getU8x8(), clock,  data,  reset);
+  }
+};
+class U8G2_SSD1325_NHD_128X64_F_HW_I2C : public U8G2 {
+  public: U8G2_SSD1325_NHD_128X64_F_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1325_i2c_nhd_128x64_f(&u8g2, rotation, u8x8_byte_arduino_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
+class U8G2_SSD1325_NHD_128X64_F_2ND_HW_I2C : public U8G2 {
+  public: U8G2_SSD1325_NHD_128X64_F_2ND_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1325_i2c_nhd_128x64_f(&u8g2, rotation, u8x8_byte_arduino_2nd_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_1_4W_SW_SPI : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_1_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_seeed_96x96_1(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_1_4W_HW_SPI : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_1_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_seeed_96x96_1(&u8g2, rotation, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_1_3W_SW_SPI : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_1_3W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_seeed_96x96_1(&u8g2, rotation, u8x8_byte_3wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_3Wire_SW_SPI(getU8x8(), clock, data, cs, reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_1_6800 : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_1_6800(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_seeed_96x96_1(&u8g2, rotation, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_1_8080 : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_1_8080(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_seeed_96x96_1(&u8g2, rotation, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_2_4W_SW_SPI : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_2_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_seeed_96x96_2(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_2_4W_HW_SPI : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_2_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_seeed_96x96_2(&u8g2, rotation, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_2_3W_SW_SPI : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_2_3W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_seeed_96x96_2(&u8g2, rotation, u8x8_byte_3wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_3Wire_SW_SPI(getU8x8(), clock, data, cs, reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_2_6800 : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_2_6800(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_seeed_96x96_2(&u8g2, rotation, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_2_8080 : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_2_8080(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_seeed_96x96_2(&u8g2, rotation, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_F_4W_SW_SPI : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_F_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_seeed_96x96_f(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_F_4W_HW_SPI : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_F_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_seeed_96x96_f(&u8g2, rotation, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_F_3W_SW_SPI : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_F_3W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_seeed_96x96_f(&u8g2, rotation, u8x8_byte_3wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_3Wire_SW_SPI(getU8x8(), clock, data, cs, reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_F_6800 : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_F_6800(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_seeed_96x96_f(&u8g2, rotation, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_F_8080 : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_F_8080(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_seeed_96x96_f(&u8g2, rotation, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_1_SW_I2C : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_1_SW_I2C(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_i2c_seeed_96x96_1(&u8g2, rotation, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SW_I2C(getU8x8(), clock,  data,  reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_1_HW_I2C : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_1_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_i2c_seeed_96x96_1(&u8g2, rotation, u8x8_byte_arduino_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_1_2ND_HW_I2C : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_1_2ND_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_i2c_seeed_96x96_1(&u8g2, rotation, u8x8_byte_arduino_2nd_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_2_SW_I2C : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_2_SW_I2C(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_i2c_seeed_96x96_2(&u8g2, rotation, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SW_I2C(getU8x8(), clock,  data,  reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_2_HW_I2C : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_2_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_i2c_seeed_96x96_2(&u8g2, rotation, u8x8_byte_arduino_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_2_2ND_HW_I2C : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_2_2ND_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_i2c_seeed_96x96_2(&u8g2, rotation, u8x8_byte_arduino_2nd_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_F_SW_I2C : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_F_SW_I2C(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_i2c_seeed_96x96_f(&u8g2, rotation, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SW_I2C(getU8x8(), clock,  data,  reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_F_HW_I2C : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_F_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_i2c_seeed_96x96_f(&u8g2, rotation, u8x8_byte_arduino_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
+class U8G2_SSD1327_SEEED_96X96_F_2ND_HW_I2C : public U8G2 {
+  public: U8G2_SSD1327_SEEED_96X96_F_2ND_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_ssd1327_i2c_seeed_96x96_f(&u8g2, rotation, u8x8_byte_arduino_2nd_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
 class U8G2_LD7032_60X32_1_4W_SW_SPI : public U8G2 {
   public: U8G2_LD7032_60X32_1_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
     u8g2_Setup_ld7032_60x32_1(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
@@ -2898,6 +3096,78 @@ class U8G2_ST7567_PI_132X64_F_8080 : public U8G2 {
     u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
   }
 };
+class U8G2_NT7534_TG12864R_1_4W_SW_SPI : public U8G2 {
+  public: U8G2_NT7534_TG12864R_1_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_nt7534_tg12864r_1(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
+  }
+};
+class U8G2_NT7534_TG12864R_1_4W_HW_SPI : public U8G2 {
+  public: U8G2_NT7534_TG12864R_1_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_nt7534_tg12864r_1(&u8g2, rotation, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8G2_NT7534_TG12864R_1_6800 : public U8G2 {
+  public: U8G2_NT7534_TG12864R_1_6800(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_nt7534_tg12864r_1(&u8g2, rotation, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_NT7534_TG12864R_1_8080 : public U8G2 {
+  public: U8G2_NT7534_TG12864R_1_8080(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_nt7534_tg12864r_1(&u8g2, rotation, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_NT7534_TG12864R_2_4W_SW_SPI : public U8G2 {
+  public: U8G2_NT7534_TG12864R_2_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_nt7534_tg12864r_2(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
+  }
+};
+class U8G2_NT7534_TG12864R_2_4W_HW_SPI : public U8G2 {
+  public: U8G2_NT7534_TG12864R_2_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_nt7534_tg12864r_2(&u8g2, rotation, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8G2_NT7534_TG12864R_2_6800 : public U8G2 {
+  public: U8G2_NT7534_TG12864R_2_6800(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_nt7534_tg12864r_2(&u8g2, rotation, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_NT7534_TG12864R_2_8080 : public U8G2 {
+  public: U8G2_NT7534_TG12864R_2_8080(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_nt7534_tg12864r_2(&u8g2, rotation, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_NT7534_TG12864R_F_4W_SW_SPI : public U8G2 {
+  public: U8G2_NT7534_TG12864R_F_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_nt7534_tg12864r_f(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
+  }
+};
+class U8G2_NT7534_TG12864R_F_4W_HW_SPI : public U8G2 {
+  public: U8G2_NT7534_TG12864R_F_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_nt7534_tg12864r_f(&u8g2, rotation, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8G2_NT7534_TG12864R_F_6800 : public U8G2 {
+  public: U8G2_NT7534_TG12864R_F_6800(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_nt7534_tg12864r_f(&u8g2, rotation, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_NT7534_TG12864R_F_8080 : public U8G2 {
+  public: U8G2_NT7534_TG12864R_F_8080(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_nt7534_tg12864r_f(&u8g2, rotation, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
 class U8G2_KS0108_128X64_1 : public U8G2 {
   public: U8G2_KS0108_128X64_1(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t dc, uint8_t cs0, uint8_t cs1, uint8_t cs2, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
     u8g2_Setup_ks0108_128x64_1(&u8g2, rotation, u8x8_byte_arduino_ks0108, u8x8_gpio_and_delay_arduino);
diff --git a/src/U8x8lib.h b/src/U8x8lib.h
index f53ab2bd..f8bcad20 100644
--- a/src/U8x8lib.h
+++ b/src/U8x8lib.h
@@ -560,6 +560,72 @@ class U8X8_SSD1325_NHD_128X64_8080 : public U8X8 {
     u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
   }
 };
+class U8X8_SSD1325_NHD_128X64_SW_I2C : public U8X8 {
+  public: U8X8_SSD1325_NHD_128X64_SW_I2C(uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_ssd1325_nhd_128x64, u8x8_cad_ssd13xx_i2c, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SW_I2C(getU8x8(), clock,  data,  reset);
+  }
+};
+class U8X8_SSD1325_NHD_128X64_HW_I2C : public U8X8 {
+  public: U8X8_SSD1325_NHD_128X64_HW_I2C(uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_ssd1325_nhd_128x64, u8x8_cad_ssd13xx_i2c, u8x8_byte_arduino_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
+class U8X8_SSD1325_NHD_128X64_2ND_HW_I2C : public U8X8 {
+  public: U8X8_SSD1325_NHD_128X64_2ND_HW_I2C(uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_ssd1325_nhd_128x64, u8x8_cad_ssd13xx_i2c, u8x8_byte_arduino_2nd_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
+class U8X8_SSD1327_SEEED_96X96_4W_SW_SPI : public U8X8 {
+  public: U8X8_SSD1327_SEEED_96X96_4W_SW_SPI(uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_ssd1327_seeed_96x96, u8x8_cad_001, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
+  }
+};
+class U8X8_SSD1327_SEEED_96X96_4W_HW_SPI : public U8X8 {
+  public: U8X8_SSD1327_SEEED_96X96_4W_HW_SPI(uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_ssd1327_seeed_96x96, u8x8_cad_001, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8X8_SSD1327_SEEED_96X96_3W_SW_SPI : public U8X8 {
+  public: U8X8_SSD1327_SEEED_96X96_3W_SW_SPI(uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_ssd1327_seeed_96x96, u8x8_cad_001, u8x8_byte_3wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_3Wire_SW_SPI(getU8x8(), clock, data, cs, reset);
+  }
+};
+class U8X8_SSD1327_SEEED_96X96_6800 : public U8X8 {
+  public: U8X8_SSD1327_SEEED_96X96_6800(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_ssd1327_seeed_96x96, u8x8_cad_001, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8X8_SSD1327_SEEED_96X96_8080 : public U8X8 {
+  public: U8X8_SSD1327_SEEED_96X96_8080(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_ssd1327_seeed_96x96, u8x8_cad_001, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8X8_SSD1327_SEEED_96X96_SW_I2C : public U8X8 {
+  public: U8X8_SSD1327_SEEED_96X96_SW_I2C(uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_ssd1327_seeed_96x96, u8x8_cad_ssd13xx_i2c, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SW_I2C(getU8x8(), clock,  data,  reset);
+  }
+};
+class U8X8_SSD1327_SEEED_96X96_HW_I2C : public U8X8 {
+  public: U8X8_SSD1327_SEEED_96X96_HW_I2C(uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_ssd1327_seeed_96x96, u8x8_cad_ssd13xx_i2c, u8x8_byte_arduino_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
+class U8X8_SSD1327_SEEED_96X96_2ND_HW_I2C : public U8X8 {
+  public: U8X8_SSD1327_SEEED_96X96_2ND_HW_I2C(uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_ssd1327_seeed_96x96, u8x8_cad_ssd13xx_i2c, u8x8_byte_arduino_2nd_hw_i2c, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_HW_I2C(getU8x8(), reset);
+  }
+};
 class U8X8_LD7032_60X32_4W_SW_SPI : public U8X8 {
   public: U8X8_LD7032_60X32_4W_SW_SPI(uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
     u8x8_Setup(getU8x8(), u8x8_d_ld7032_60x32, u8x8_cad_011, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
@@ -1106,6 +1172,30 @@ class U8X8_ST7567_PI_132X64_8080 : public U8X8 {
     u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
   }
 };
+class U8X8_NT7534_TG12864R_4W_SW_SPI : public U8X8 {
+  public: U8X8_NT7534_TG12864R_4W_SW_SPI(uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_nt7534_tg12864r, u8x8_cad_001, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
+  }
+};
+class U8X8_NT7534_TG12864R_4W_HW_SPI : public U8X8 {
+  public: U8X8_NT7534_TG12864R_4W_HW_SPI(uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_nt7534_tg12864r, u8x8_cad_001, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8X8_NT7534_TG12864R_6800 : public U8X8 {
+  public: U8X8_NT7534_TG12864R_6800(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_nt7534_tg12864r, u8x8_cad_001, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8X8_NT7534_TG12864R_8080 : public U8X8 {
+  public: U8X8_NT7534_TG12864R_8080(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_nt7534_tg12864r, u8x8_cad_001, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
 class U8X8_KS0108_128X64 : public U8X8 {
   public: U8X8_KS0108_128X64(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t dc, uint8_t cs0, uint8_t cs1, uint8_t cs2, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
     u8x8_Setup(getU8x8(), u8x8_d_ks0108_128x64, u8x8_cad_001, u8x8_byte_arduino_ks0108, u8x8_gpio_and_delay_arduino);
diff --git a/src/clib/u8g2.h b/src/clib/u8g2.h
index 392ea44f..4176bd64 100644
--- a/src/clib/u8g2.h
+++ b/src/clib/u8g2.h
@@ -417,6 +417,9 @@ uint8_t *u8g2_m_ssd1306_8_f(uint8_t *page_cnt);
 uint8_t *u8g2_m_ssd1325_16_1(uint8_t *page_cnt);
 uint8_t *u8g2_m_ssd1325_16_2(uint8_t *page_cnt);
 uint8_t *u8g2_m_ssd1325_16_f(uint8_t *page_cnt);
+uint8_t *u8g2_m_ssd1327_12_1(uint8_t *page_cnt);
+uint8_t *u8g2_m_ssd1327_12_2(uint8_t *page_cnt);
+uint8_t *u8g2_m_ssd1327_12_f(uint8_t *page_cnt);
 uint8_t *u8g2_m_ld7032_8_1(uint8_t *page_cnt);
 uint8_t *u8g2_m_ld7032_8_2(uint8_t *page_cnt);
 uint8_t *u8g2_m_ld7032_8_f(uint8_t *page_cnt);
@@ -459,6 +462,9 @@ uint8_t *u8g2_m_st7565_16_f(uint8_t *page_cnt);
 uint8_t *u8g2_m_st7567_17_1(uint8_t *page_cnt);
 uint8_t *u8g2_m_st7567_17_2(uint8_t *page_cnt);
 uint8_t *u8g2_m_st7567_17_f(uint8_t *page_cnt);
+uint8_t *u8g2_m_nt7534_16_1(uint8_t *page_cnt);
+uint8_t *u8g2_m_nt7534_16_2(uint8_t *page_cnt);
+uint8_t *u8g2_m_nt7534_16_f(uint8_t *page_cnt);
 uint8_t *u8g2_m_ks0108_16_1(uint8_t *page_cnt);
 uint8_t *u8g2_m_ks0108_16_2(uint8_t *page_cnt);
 uint8_t *u8g2_m_ks0108_16_f(uint8_t *page_cnt);
@@ -536,6 +542,15 @@ void u8g2_Setup_ssd1306_i2c_64x48_er_f(u8g2_t *u8g2, const u8g2_cb_t *rotation,
 void u8g2_Setup_ssd1325_nhd_128x64_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_ssd1325_nhd_128x64_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_ssd1325_nhd_128x64_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_ssd1325_i2c_nhd_128x64_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_ssd1325_i2c_nhd_128x64_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_ssd1325_i2c_nhd_128x64_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_ssd1327_seeed_96x96_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_ssd1327_seeed_96x96_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_ssd1327_seeed_96x96_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_ssd1327_i2c_seeed_96x96_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_ssd1327_i2c_seeed_96x96_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_ssd1327_i2c_seeed_96x96_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_ld7032_60x32_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_ld7032_60x32_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_ld7032_60x32_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
@@ -626,6 +641,9 @@ void u8g2_Setup_st7565_nhd_c12832_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x
 void u8g2_Setup_st7567_pi_132x64_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_st7567_pi_132x64_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_st7567_pi_132x64_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_nt7534_tg12864r_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_nt7534_tg12864r_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_nt7534_tg12864r_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_ks0108_128x64_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_ks0108_128x64_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_ks0108_128x64_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
diff --git a/src/clib/u8g2_d_memory.c b/src/clib/u8g2_d_memory.c
index 4ad0dd22..003bc032 100644
--- a/src/clib/u8g2_d_memory.c
+++ b/src/clib/u8g2_d_memory.c
@@ -75,6 +75,24 @@ uint8_t *u8g2_m_ssd1325_16_f(uint8_t *page_cnt)
   *page_cnt = 8;
   return buf;
 }
+uint8_t *u8g2_m_ssd1327_12_1(uint8_t *page_cnt)
+{
+  static uint8_t buf[96];
+  *page_cnt = 1;
+  return buf;
+}
+uint8_t *u8g2_m_ssd1327_12_2(uint8_t *page_cnt)
+{
+  static uint8_t buf[192];
+  *page_cnt = 2;
+  return buf;
+}
+uint8_t *u8g2_m_ssd1327_12_f(uint8_t *page_cnt)
+{
+  static uint8_t buf[1152];
+  *page_cnt = 12;
+  return buf;
+}
 uint8_t *u8g2_m_ld7032_8_1(uint8_t *page_cnt)
 {
   static uint8_t buf[64];
@@ -327,6 +345,24 @@ uint8_t *u8g2_m_st7567_17_f(uint8_t *page_cnt)
   *page_cnt = 8;
   return buf;
 }
+uint8_t *u8g2_m_nt7534_16_1(uint8_t *page_cnt)
+{
+  static uint8_t buf[128];
+  *page_cnt = 1;
+  return buf;
+}
+uint8_t *u8g2_m_nt7534_16_2(uint8_t *page_cnt)
+{
+  static uint8_t buf[256];
+  *page_cnt = 2;
+  return buf;
+}
+uint8_t *u8g2_m_nt7534_16_f(uint8_t *page_cnt)
+{
+  static uint8_t buf[1024];
+  *page_cnt = 8;
+  return buf;
+}
 uint8_t *u8g2_m_ks0108_16_1(uint8_t *page_cnt)
 {
   static uint8_t buf[128];
diff --git a/src/clib/u8g2_d_setup.c b/src/clib/u8g2_d_setup.c
index d26c6f7a..d21d1e69 100644
--- a/src/clib/u8g2_d_setup.c
+++ b/src/clib/u8g2_d_setup.c
@@ -351,6 +351,90 @@ void u8g2_Setup_ssd1325_nhd_128x64_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8
   buf = u8g2_m_ssd1325_16_f(&tile_buf_height);
   u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
 }
+/* ssd1325 */
+/* ssd1325 1 */
+void u8g2_Setup_ssd1325_i2c_nhd_128x64_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_ssd1325_nhd_128x64, u8x8_cad_ssd13xx_i2c, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_ssd1325_16_1(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
+/* ssd1325 2 */
+void u8g2_Setup_ssd1325_i2c_nhd_128x64_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_ssd1325_nhd_128x64, u8x8_cad_ssd13xx_i2c, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_ssd1325_16_2(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
+/* ssd1325 f */
+void u8g2_Setup_ssd1325_i2c_nhd_128x64_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_ssd1325_nhd_128x64, u8x8_cad_ssd13xx_i2c, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_ssd1325_16_f(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
+/* ssd1327 */
+/* ssd1327 1 */
+void u8g2_Setup_ssd1327_seeed_96x96_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_ssd1327_seeed_96x96, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_ssd1327_12_1(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
+/* ssd1327 2 */
+void u8g2_Setup_ssd1327_seeed_96x96_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_ssd1327_seeed_96x96, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_ssd1327_12_2(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
+/* ssd1327 f */
+void u8g2_Setup_ssd1327_seeed_96x96_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_ssd1327_seeed_96x96, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_ssd1327_12_f(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
+/* ssd1327 */
+/* ssd1327 1 */
+void u8g2_Setup_ssd1327_i2c_seeed_96x96_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_ssd1327_seeed_96x96, u8x8_cad_ssd13xx_i2c, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_ssd1327_12_1(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
+/* ssd1327 2 */
+void u8g2_Setup_ssd1327_i2c_seeed_96x96_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_ssd1327_seeed_96x96, u8x8_cad_ssd13xx_i2c, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_ssd1327_12_2(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
+/* ssd1327 f */
+void u8g2_Setup_ssd1327_i2c_seeed_96x96_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_ssd1327_seeed_96x96, u8x8_cad_ssd13xx_i2c, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_ssd1327_12_f(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
 /* ld7032 */
 /* ld7032 1 */
 void u8g2_Setup_ld7032_60x32_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
@@ -1183,6 +1267,34 @@ void u8g2_Setup_st7567_pi_132x64_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8
   buf = u8g2_m_st7567_17_f(&tile_buf_height);
   u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
 }
+/* nt7534 */
+/* nt7534 1 */
+void u8g2_Setup_nt7534_tg12864r_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_nt7534_tg12864r, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_nt7534_16_1(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
+/* nt7534 2 */
+void u8g2_Setup_nt7534_tg12864r_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_nt7534_tg12864r, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_nt7534_16_2(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
+/* nt7534 f */
+void u8g2_Setup_nt7534_tg12864r_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_nt7534_tg12864r, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_nt7534_16_f(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
 /* ks0108 */
 /* ks0108 1 */
 void u8g2_Setup_ks0108_128x64_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
diff --git a/src/clib/u8g2_ll_hvline.c b/src/clib/u8g2_ll_hvline.c
index c63ce3c3..3e5c77ae 100644
--- a/src/clib/u8g2_ll_hvline.c
+++ b/src/clib/u8g2_ll_hvline.c
@@ -122,7 +122,7 @@ void u8g2_ll_hvline_vertical_top_lsb(u8g2_t *u8g2, u8g2_uint_t x, u8g2_uint_t y,
 
       if ( bit_pos == 0 )
       {
-	ptr+=u8g2->width;
+	ptr+=u8g2->pixel_buf_width;	/* 6 Jan 17: Changed u8g2->width to u8g2->pixel_buf_width, issue #148 */
 	
 	/* another speed optimization, but requires about 60 bytes on AVR */
 	/*
diff --git a/src/clib/u8x8.h b/src/clib/u8x8.h
index 99785306..0eebcf22 100644
--- a/src/clib/u8x8.h
+++ b/src/clib/u8x8.h
@@ -728,6 +728,7 @@ uint8_t u8x8_d_st7565_zolen_128x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, v
 uint8_t u8x8_d_st7565_nhd_c12832(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_st7565_lm6059(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_st7567_pi_132x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
+uint8_t u8x8_d_nt7534_tg12864r(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr); /* u8x8_d_st7565.c */
 uint8_t u8x8_d_ld7032_60x32(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_t6963_240x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_t6963_240x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
@@ -738,6 +739,7 @@ uint8_t u8x8_d_a2printer_384x240(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, voi
 uint8_t u8x8_d_sed1330_240x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_ra8835_nhd_240x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_ssd1325_nhd_128x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
+uint8_t u8x8_d_ssd1327_seeed_96x96(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_uc1604_jlx19264(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_uc1608_erc24064(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_uc1608_240x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
diff --git a/src/clib/u8x8_d_ssd1305.c b/src/clib/u8x8_d_ssd1305.c
new file mode 100644
index 00000000..5d89a8ba
--- /dev/null
+++ b/src/clib/u8x8_d_ssd1305.c
@@ -0,0 +1,155 @@
+/*
+
+  u8x8_d_ssd1305.c
+
+  Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
+
+  Copyright (c) 2017, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+
+#include "u8x8.h"
+
+
+
+/* more or less generic setup of all these small OLEDs */
+static const uint8_t u8x8_d_ssd1305_128x32_noname_init_seq[] = {
+    
+  U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  
+  
+  U8X8_C(0x0ae),		                /* display off */
+  U8X8_CA(0x0d5, 0x080),		/* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
+  U8X8_CA(0x0a8, 0x03f),		/* multiplex ratio */
+  U8X8_CA(0x0d3, 0x000),		/* display offset */
+  U8X8_C(0x040),		                /* set display start line to 0 */
+  U8X8_CA(0x08d, 0x014),		/* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */
+  U8X8_CA(0x020, 0x000),		/* page addressing mode */
+  
+  U8X8_C(0x0a1),				/* segment remap a0/a1*/
+  U8X8_C(0x0c8),				/* c0: scan dir normal, c8: reverse */
+  // Flipmode
+  // U8X8_C(0x0a0),				/* segment remap a0/a1*/
+  // U8X8_C(0x0c0),				/* c0: scan dir normal, c8: reverse */
+  
+  U8X8_CA(0x0da, 0x012),		/* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
+
+  U8X8_CA(0x081, 0x0cf), 		/* [2] set contrast control */
+  U8X8_CA(0x0d9, 0x0f1), 		/* [2] pre-charge period 0x022/f1*/
+  U8X8_CA(0x0db, 0x040), 		/* vcomh deselect level */  
+  // if vcomh is 0, then this will give the biggest range for contrast control issue #98
+  // restored the old values for the noname constructor, because vcomh=0 will not work for all OLEDs, #116
+  
+  U8X8_C(0x02e),				/* Deactivate scroll */ 
+  U8X8_C(0x0a4),				/* output ram to display */
+  U8X8_C(0x0a6),				/* none inverted normal display mode */
+    
+  U8X8_END_TRANSFER(),             	/* disable chip */
+  U8X8_END()             			/* end of sequence */
+};
+
+
+static const uint8_t u8x8_d_ssd1305_powersave0_seq[] = {
+  U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  U8X8_C(0x0af),		                /* display on */
+  U8X8_END_TRANSFER(),             	/* disable chip */
+  U8X8_END()             			/* end of sequence */
+};
+
+static const uint8_t u8x8_d_ssd1305_powersave1_seq[] = {
+  U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  U8X8_C(0x0ae),		                /* display off */
+  U8X8_END_TRANSFER(),             	/* disable chip */
+  U8X8_END()             			/* end of sequence */
+};
+
+static const uint8_t u8x8_d_ssd1305_flip0_seq[] = {
+  U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  U8X8_C(0x0a1),				/* segment remap a0/a1*/
+  U8X8_C(0x0c8),				/* c0: scan dir normal, c8: reverse */
+  U8X8_END_TRANSFER(),             	/* disable chip */
+  U8X8_END()             			/* end of sequence */
+};
+
+static const uint8_t u8x8_d_ssd1305_flip1_seq[] = {
+  U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  U8X8_C(0x0a0),				/* segment remap a0/a1*/
+  U8X8_C(0x0c0),				/* c0: scan dir normal, c8: reverse */
+  U8X8_END_TRANSFER(),             	/* disable chip */
+  U8X8_END()             			/* end of sequence */
+};
+
+
+
+
+static const u8x8_display_info_t u8x8_ssd1305_128x32_noname_display_info =
+{
+  /* chip_enable_level = */ 0,
+  /* chip_disable_level = */ 1,
+  
+  /* post_chip_enable_wait_ns = */ 20,
+  /* pre_chip_disable_wait_ns = */ 10,
+  /* reset_pulse_width_ms = */ 100, 	/* SSD1306: 3 us */
+  /* post_reset_wait_ms = */ 100, /* far east OLEDs need much longer setup time */
+  /* sda_setup_time_ns = */ 50,		/* SSD1306: 15ns, but cycle time is 100ns, so use 100/2 */
+  /* sck_pulse_width_ns = */ 50,	/* SSD1306: 20ns, but cycle time is 100ns, so use 100/2, AVR: below 70: 8 MHz, >= 70 --> 4MHz clock */
+  /* sck_clock_hz = */ 4000000UL,	/* since Arduino 1.6.0, the SPI bus speed in Hz. Should be  1000000000/sck_pulse_width_ns */
+  /* spi_mode = */ 0,		/* active high, rising edge */
+  /* i2c_bus_clock_100kHz = */ 4,
+  /* data_setup_time_ns = */ 40,
+  /* write_pulse_width_ns = */ 150,	/* SSD1306: cycle time is 300ns, so use 300/2 = 150 */
+  /* tile_width = */ 16,
+  /* tile_hight = */ 8,
+  /* default_x_offset = */ 0,
+  /* flipmode_x_offset = */ 0,
+  /* pixel_width = */ 128,
+  /* pixel_height = */ 64
+};
+
+uint8_t u8x8_d_ssd1305_128x32_noname(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
+{
+    
+  //if ( u8x8_d_ssd1306_sh1106_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
+  //  return 1;
+  
+  switch(msg)
+  {
+    case U8X8_MSG_DISPLAY_INIT:
+      u8x8_d_helper_display_init(u8x8);
+      u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1305_128x32_noname_init_seq);    
+      break;
+    case U8X8_MSG_DISPLAY_SETUP_MEMORY:
+      u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1305_128x32_noname_display_info);
+      break;
+    default:
+      return 0;
+  }
+  return 1;
+}
+
diff --git a/src/clib/u8x8_d_ssd1322.c b/src/clib/u8x8_d_ssd1322.c
index ed679da6..afbb4cda 100644
--- a/src/clib/u8x8_d_ssd1322.c
+++ b/src/clib/u8x8_d_ssd1322.c
@@ -106,6 +106,8 @@ static const uint8_t u8x8_d_ssd1322_256x64_flip1_seq[] = {
 /* interpret b as a monochrome bit pattern, write value 15 for high bit and value 0 for a low bit */
 /* topbit (msb) is sent last */
 /* example: b = 0x083 will send 0xff, 0x00, 0x00, 0xf0 */
+
+/* 4 Jan 2017: I think this procedure not required any more. Delete? */
 uint8_t u8x8_write_byte_to_16gr_device(u8x8_t *u8x8, uint8_t b)
 {
   static uint8_t buf[4];
diff --git a/src/clib/u8x8_d_ssd1325.c b/src/clib/u8x8_d_ssd1325.c
index 3111eb12..a679288f 100644
--- a/src/clib/u8x8_d_ssd1325.c
+++ b/src/clib/u8x8_d_ssd1325.c
@@ -1,6 +1,6 @@
 /*
 
-  u8x8_d_ssd1325_128x64.c
+  u8x8_d_ssd1325.c
 
   Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
 
@@ -209,7 +209,7 @@ static uint8_t u8x8_d_ssd1325_128x64_generic(u8x8_t *u8x8, uint8_t msg, uint8_t
 	{
 	  if ( ptr[0] | ptr[1] | ptr[2] | ptr[3] | ptr[4] | ptr[5] | ptr[6] | ptr[7] )
 	  {
-	    /* draw the tile of pattern is not fully clear */
+	    /* draw the tile if pattern is not zero for all bytes */
 	    u8x8_cad_SendCmd(u8x8, 0x015 );	/* set column address */
 	    u8x8_cad_SendArg(u8x8, x );	/* start */
 	    u8x8_cad_SendArg(u8x8, x+3 );	/* end */
diff --git a/src/clib/u8x8_d_ssd1327.c b/src/clib/u8x8_d_ssd1327.c
new file mode 100644
index 00000000..e980039b
--- /dev/null
+++ b/src/clib/u8x8_d_ssd1327.c
@@ -0,0 +1,310 @@
+/*
+
+  u8x8_d_ssd1327.c
+
+  Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
+
+  Copyright (c) 2016, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+
+#include "u8x8.h"
+
+
+static const uint8_t u8x8_d_ssd1327_96x96_powersave0_seq[] = {
+  U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  U8X8_C(0x0af),		                /* display on */
+  U8X8_END_TRANSFER(),             	/* disable chip */
+  U8X8_END()             			/* end of sequence */
+};
+
+static const uint8_t u8x8_d_ssd1327_96x96_powersave1_seq[] = {
+  U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  U8X8_C(0x0ae),		                /* display off */
+  U8X8_END_TRANSFER(),             	/* disable chip */
+  U8X8_END()             			/* end of sequence */
+};
+
+
+
+
+/*
+  input:
+    one tile (8 Bytes)
+  output:
+    Tile for ssd1327 (32 Bytes)
+*/
+
+static uint8_t u8x8_ssd1327_8to32_dest_buf[32];
+
+static uint8_t *u8x8_ssd1327_8to32(U8X8_UNUSED u8x8_t *u8x8, uint8_t *ptr)
+{
+  uint8_t v;
+  uint8_t a,b;
+  uint8_t i, j;
+  uint8_t *dest;
+  
+  for( j = 0; j < 4; j++ )
+  {
+    dest = u8x8_ssd1327_8to32_dest_buf;
+    dest += j;
+    a =*ptr;
+    ptr++;
+    b = *ptr;
+    ptr++;
+    for( i = 0; i < 8; i++ )
+    {
+      v = 0;
+      if ( a&1 ) v |= 0xf0;
+      if ( b&1 ) v |= 0x0f;
+      *dest = v;
+      dest+=4;
+      a >>= 1;
+      b >>= 1;
+    }
+  }
+  
+  return u8x8_ssd1327_8to32_dest_buf;
+}
+
+
+
+
+static uint8_t u8x8_d_ssd1327_96x96_generic(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
+{
+  uint8_t x, y, c;
+  uint8_t *ptr;
+  switch(msg)
+  {
+    /* handled by the calling function
+    case U8X8_MSG_DISPLAY_SETUP_MEMORY:
+      u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1327_96x96_display_info);
+      break;
+    */
+    /* handled by the calling function
+    case U8X8_MSG_DISPLAY_INIT:
+      u8x8_d_helper_display_init(u8x8);
+      u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1327_96x96_init_seq);    
+      break;
+    */
+    case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
+      if ( arg_int == 0 )
+	u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1327_96x96_powersave0_seq);
+      else
+	u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1327_96x96_powersave1_seq);
+      break;
+#ifdef U8X8_WITH_SET_CONTRAST
+    case U8X8_MSG_DISPLAY_SET_CONTRAST:
+      u8x8_cad_StartTransfer(u8x8);
+      u8x8_cad_SendCmd(u8x8, 0x081 );
+      u8x8_cad_SendArg(u8x8, arg_int );	/* ssd1327 has range from 0 to 255 */
+      u8x8_cad_EndTransfer(u8x8);
+      break;
+#endif
+    case U8X8_MSG_DISPLAY_DRAW_TILE:
+      u8x8_cad_StartTransfer(u8x8);
+      x = ((u8x8_tile_t *)arg_ptr)->x_pos;    
+      x *= 4;
+      x+=u8x8->x_offset/2;
+    
+      y = (((u8x8_tile_t *)arg_ptr)->y_pos);
+      y *= 8;
+    
+      
+      do
+      {
+	c = ((u8x8_tile_t *)arg_ptr)->cnt;
+	ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
+
+	do
+	{
+	  u8x8_cad_SendCmd(u8x8, 0x015 );	/* set column address */
+	  u8x8_cad_SendArg(u8x8, x );	/* start */
+	  u8x8_cad_SendArg(u8x8, x+3 );	/* end */
+
+	  u8x8_cad_SendCmd(u8x8, 0x075 );	/* set row address */
+	  u8x8_cad_SendArg(u8x8, y);
+	  u8x8_cad_SendArg(u8x8, y+7);
+	  
+	  
+	  u8x8_cad_SendData(u8x8, 32, u8x8_ssd1327_8to32(u8x8, ptr));
+	  ptr += 8;
+	  x += 4;
+	  c--;
+	} while( c > 0 );
+	
+	//x += 4;
+	arg_int--;
+      } while( arg_int > 0 );
+      
+      u8x8_cad_EndTransfer(u8x8);
+      break;
+    default:
+      return 0;
+  }
+  return 1;
+}
+
+/*=============================================*/
+/*  Seeedstudio Grove OLED 96x96 */
+
+static const u8x8_display_info_t u8x8_ssd1327_96x96_display_info =
+{
+  /* chip_enable_level = */ 0,
+  /* chip_disable_level = */ 1,
+  
+  /* post_chip_enable_wait_ns = */ 20,
+  /* pre_chip_disable_wait_ns = */ 10,
+  /* reset_pulse_width_ms = */ 100, 	
+  /* post_reset_wait_ms = */ 100, 		/**/
+  /* sda_setup_time_ns = */ 100,		/* */
+  /* sck_pulse_width_ns = */ 100,	/*  */
+  /* sck_clock_hz = */ 4000000UL,	/* since Arduino 1.6.0, the SPI bus speed in Hz. Should be  1000000000/sck_pulse_width_ns */
+  /* spi_mode = */ 0,		/* active high, rising edge */
+  /* i2c_bus_clock_100kHz = */ 1,	/* use 1 instead of 4, because the SSD1327 seems to be very slow */
+  /* data_setup_time_ns = */ 40,
+  /* write_pulse_width_ns = */ 60,	
+  /* tile_width = */ 12,
+  /* tile_hight = */ 12,
+  /* default_x_offset = */ 16,
+  /* flipmode_x_offset = */ 16,		
+  /* pixel_width = */ 96,
+  /* pixel_height = */ 96
+};
+
+/*  https://github.com/SeeedDocument/Grove_OLED_1.12/raw/master/resources/LY120-096096.pdf */
+/*  http://www.seeedstudio.com/wiki/index.php?title=Twig_-_OLED_96x96 */
+/* values from u8glib */
+/*
+  Re-map setting in Graphic Display Data RAM, command 0x0a0
+    Bit 0: Column Address Re-map
+    Bit 1: Nibble Re-map
+    Bit 2: Horizontal/Vertical Address Increment
+    Bit 3: Not used, must be 0
+    
+    Bit 4: COM Re-map
+    Bit 5: Not used, must be 0
+    Bit 6: COM Split Odd Even
+    Bit 7: Not used, must be 0
+*/
+
+
+static const uint8_t u8x8_d_ssd1327_96x96_init_seq[] = {
+    
+  U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  
+  U8X8_CA(0x0fd, 0x012),		/* unlock display, usually not required because the display is unlocked after reset */
+  U8X8_C(0x0ae),		                /* display off */
+  //U8X8_CA(0x0a8, 0x03f),		/* multiplex ratio: 0x03f * 1/64 duty */
+  U8X8_CA(0x0a8, 0x05f),		/* multiplex ratio: 0x05f * 1/64 duty */
+  U8X8_CA(0x0a1, 0x000),		/* display start line */
+  //U8X8_CA(0x0a2, 0x04c),		/* display offset, shift mapping ram counter */
+  
+  U8X8_CA(0x0a2, 0x020),		/* display offset, shift mapping ram counter */
+  U8X8_CA(0x0a0, 0x051),		/* remap configuration */
+  
+  
+  U8X8_CA(0x0ab, 0x001),		/* Enable internal VDD regulator (RESET) */
+  //U8X8_CA(0x081, 0x070),		/* contrast, brightness, 0..128 */
+  U8X8_CA(0x081, 0x053),		/* contrast, brightness, 0..128 */
+  //U8X8_CA(0x0b1, 0x055),                    /* phase length */
+  U8X8_CA(0x0b1, 0x051),                    /* phase length */  
+  //U8X8_CA(0x0b3, 0x091),		/* set display clock divide ratio/oscillator frequency (set clock as 135 frames/sec) */			
+  U8X8_CA(0x0b3, 0x001),		/* set display clock divide ratio/oscillator frequency  */			
+  
+  //? U8X8_CA(0x0ad, 0x002),		/* master configuration: disable embedded DC-DC, enable internal VCOMH */
+  //? U8X8_C(0x086),				/* full current range (0x084, 0x085, 0x086) */
+  
+  U8X8_C(0x0b9),				/* use linear lookup table */
+
+  //U8X8_CA(0x0bc, 0x010),                    /* pre-charge voltage level */
+  U8X8_CA(0x0bc, 0x008),                    /* pre-charge voltage level */
+  //U8X8_CA(0x0be, 0x01c),                     /* VCOMH voltage */
+  U8X8_CA(0x0be, 0x007),                     /* VCOMH voltage */
+  U8X8_CA(0x0b6, 0x001),		/* second precharge */
+  U8X8_CA(0x0d5, 0x062),		/* enable second precharge, internal vsl (bit0 = 0) */
+
+
+  
+  U8X8_C(0x0a4),				/* normal display mode */
+    
+  U8X8_END_TRANSFER(),             	/* disable chip */
+  U8X8_END()             			/* end of sequence */
+};
+
+
+static const uint8_t u8x8_d_ssd1327_seeed_96x96_flip0_seq[] = {
+  U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  U8X8_CA(0x0a2, 0x020),		/* display offset, shift mapping ram counter */
+  U8X8_CA(0x0a0, 0x051),		/* remap configuration */
+  U8X8_END_TRANSFER(),             	/* disable chip */
+  U8X8_END()             			/* end of sequence */
+};
+
+static const uint8_t u8x8_d_ssd1327_seeed_96x96_flip1_seq[] = {
+  U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  U8X8_CA(0x0a2, 0x060),		/* display offset, shift mapping ram counter */
+  U8X8_CA(0x0a0, 0x042),		/* remap configuration */
+  U8X8_END_TRANSFER(),             	/* disable chip */
+  U8X8_END()             			/* end of sequence */
+};
+
+
+uint8_t u8x8_d_ssd1327_seeed_96x96(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
+{
+  if ( u8x8_d_ssd1327_96x96_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
+    return 1;
+  if ( msg == U8X8_MSG_DISPLAY_SETUP_MEMORY )
+  {
+    u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1327_96x96_display_info);
+    return 1;
+  }
+  else if ( msg == U8X8_MSG_DISPLAY_INIT )
+  {
+    u8x8_d_helper_display_init(u8x8);
+    u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1327_96x96_init_seq);    
+    return 1;
+  }
+  else if  ( msg == U8X8_MSG_DISPLAY_SET_FLIP_MODE )
+  {
+    if ( arg_int == 0 )
+    {
+      u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1327_seeed_96x96_flip0_seq);
+      u8x8->x_offset = u8x8->display_info->default_x_offset;
+    }
+    else
+    {
+      u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1327_seeed_96x96_flip1_seq);
+      u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
+    }
+  }
+  return 0;
+}
+
+
diff --git a/src/clib/u8x8_d_st7565.c b/src/clib/u8x8_d_st7565.c
index 710cd3b7..15affe51 100644
--- a/src/clib/u8x8_d_st7565.c
+++ b/src/clib/u8x8_d_st7565.c
@@ -1,6 +1,7 @@
 /*
 
   u8x8_d_st7565.c
+  also includes support for nt7534
   
   Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
 
@@ -41,6 +42,7 @@
 
 static const uint8_t u8x8_d_st7565_powersave0_seq[] = {
   U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  U8X8_C(0x0a4),		                /* all pixel off, issue 142 */
   U8X8_C(0x0af),		                /* display on */
   U8X8_END_TRANSFER(),             	/* disable chip */
   U8X8_END()             			/* end of sequence */
@@ -49,6 +51,7 @@ static const uint8_t u8x8_d_st7565_powersave0_seq[] = {
 static const uint8_t u8x8_d_st7565_powersave1_seq[] = {
   U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
   U8X8_C(0x0ae),		                /* display off */
+  U8X8_C(0x0a5),		                /* enter powersafe: all pixel on, issue 142 */
   U8X8_END_TRANSFER(),             	/* disable chip */
   U8X8_END()             			/* end of sequence */
 };
@@ -223,7 +226,9 @@ static const uint8_t u8x8_d_st7565_dogm128_init_seq[] = {
   U8X8_CA(0x0f8, 0x000),		/* set booster ratio to 4x */
   U8X8_C(0x027),		                /* regulator, booster and follower */
   U8X8_CA(0x081, 0x018),		/* set contrast, contrast value, EA default: 0x016 */
-  U8X8_C(0x0a4),		                /* normal display  */
+  
+  U8X8_C(0x0ae),		                /* display off */
+  U8X8_C(0x0a5),		                /* enter powersafe: all pixel on, issue 142 */
   
   U8X8_END_TRANSFER(),             	/* disable chip */
   U8X8_END()             			/* end of sequence */
@@ -286,7 +291,9 @@ static const uint8_t u8x8_d_st7565_zolen_128x64_init_seq[] = {
   U8X8_CA(0x0f8, 0x000),		/* set booster ratio to 4x */
   U8X8_C(0x027),		                /* regulator, booster and follower */
   U8X8_CA(0x081, 0x007),		/* set contrast, contrast value, EA default: 0x016 */
-  U8X8_C(0x0a4),		                /* normal display  */
+  
+  U8X8_C(0x0ae),		                /* display off */
+  U8X8_C(0x0a5),		                /* enter powersafe: all pixel on, issue 142 */
   
   U8X8_END_TRANSFER(),             	/* disable chip */
   U8X8_END()             			/* end of sequence */
@@ -351,7 +358,9 @@ static const uint8_t u8x8_d_st7565_nhd_c12832_init_seq[] = {
   U8X8_CA(0x0f8, 0x000),		/* set booster ratio to 4x */
   U8X8_C(0x023),		                /* set V0 voltage resistor ratio to large*/
   U8X8_CA(0x081, 0x00a),		/* set contrast, contrast value NHD C12832 */
-  U8X8_C(0x0a4),		                /* normal display  */
+  
+  U8X8_C(0x0ae),		                /* display off */
+  U8X8_C(0x0a5),		                /* enter powersafe: all pixel on, issue 142 */
   
   U8X8_END_TRANSFER(),             	/* disable chip */
   U8X8_END()             			/* end of sequence */
@@ -392,7 +401,7 @@ uint8_t u8x8_d_st7565_nhd_c12832(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, voi
 }
 
 /*================================================*/
-/* LM6059 (Adafruit) */
+/* LM6059 (Adafruit)... probably this is a ST7567 display */
 
 static const uint8_t u8x8_d_st7565_lm6059_init_seq[] = {
     
@@ -413,10 +422,12 @@ static const uint8_t u8x8_d_st7565_lm6059_init_seq[] = {
   U8X8_C(0x0a6),		                /* display normal, bit val 0: LCD pixel off. */
   U8X8_C(0x0a3),		                /* LCD bias 1/9 */
   U8X8_C(0x02f),		                /* all power  control circuits on */
-  U8X8_CA(0x0f8, 0x000),		/* set booster ratio to 4x */
+  U8X8_CA(0x0f8, 0x000),		/* set booster ratio to 4x (ST7567 feature)*/
   U8X8_C(0x027),		                /* regulator, booster and follower */
   U8X8_CA(0x081, 0x018),		/* set contrast, contrast value, EA default: 0x016 */
-  U8X8_C(0x0a4),		                /* normal display  */
+  
+  U8X8_C(0x0ae),		                /* display off */
+  U8X8_C(0x0a5),		                /* enter powersafe: all pixel on, issue 142 */
   
   U8X8_END_TRANSFER(),             	/* disable chip */
   U8X8_END()             			/* end of sequence */
@@ -480,3 +491,73 @@ uint8_t u8x8_d_st7565_lm6059(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *a
   return 1;
 }
 
+/*================================================*/
+/* NT7534, TG12864R */
+/* The NT7534 has an extended command set for the ST7565, however this is not used. */
+/* The TG12864R display is also shifted in lines, like the LM6059/Adafruit display */
+/* However contrast seems to be different */
+
+static const uint8_t u8x8_d_nt7534_tg12864r_init_seq[] = {
+    
+  U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  
+  U8X8_C(0x0e2),            			/* soft reset */
+  U8X8_C(0x0ae),		                /* display off */
+  U8X8_C(0x060),		                /* set display start line to ... */
+  
+  U8X8_C(0x0a0),		                /* ADC set to reverse */
+  U8X8_C(0x0c8),		                /* common output mode */
+  // Flipmode
+  //U8X8_C(0x0a1),		                /* ADC set to reverse */
+  //U8X8_C(0x0c0),		                /* common output mode */
+  
+  U8X8_C(0x0a6),		                /* display normal, bit val 0: LCD pixel off. */
+  U8X8_C(0x0a3),		                /* LCD bias 1/9 */
+  U8X8_C(0x02f),		                /* all power  control circuits on */
+  //U8X8_CA(0x0f8, 0x000),		/* set booster ratio to 4x (ST7567 feature)*/
+  U8X8_C(0x027),		                /* regulator, booster and follower */
+  U8X8_CA(0x081, 0x009),		/* set contrast, contrast value, EA default: 0x016 */
+  
+  U8X8_C(0x0ae),		                /* display off */
+  U8X8_C(0x0a5),		                /* enter powersafe: all pixel on, issue 142 */
+  
+  U8X8_END_TRANSFER(),             	/* disable chip */
+  U8X8_END()             			/* end of sequence */
+};
+
+uint8_t u8x8_d_nt7534_tg12864r(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
+{
+  /* call common procedure first and handle messages there */
+  if ( u8x8_d_st7565_common(u8x8, msg, arg_int, arg_ptr) == 0 )
+  {
+    /* msg not handled, then try here */
+    switch(msg)
+    {
+      case U8X8_MSG_DISPLAY_SETUP_MEMORY:
+	/* reuse the LM6059 data structure... this display seems to have similar shifts and offsets */
+	u8x8_d_helper_display_setup_memory(u8x8, &u8x8_st7565_lm6059_display_info);
+	break;
+      case U8X8_MSG_DISPLAY_INIT:
+	u8x8_d_helper_display_init(u8x8);
+      
+	//u8x8_cad_SendSequence(u8x8, u8x8_d_st7565_lm6059_init_seq);
+	u8x8_cad_SendSequence(u8x8, u8x8_d_nt7534_tg12864r_init_seq);
+	break;
+      case U8X8_MSG_DISPLAY_SET_FLIP_MODE:
+	if ( arg_int == 0 )
+	{
+	  u8x8_cad_SendSequence(u8x8, u8x8_d_st7565_flip1_seq);
+	  u8x8->x_offset = u8x8->display_info->default_x_offset;
+	}
+	else
+	{
+	  u8x8_cad_SendSequence(u8x8, u8x8_d_st7565_flip0_seq);
+	  u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
+	}	
+	break;
+      default:
+	return 0;		/* msg unknown */
+    }
+  }
+  return 1;
+}
diff --git a/src/clib/u8x8_d_st7567.c b/src/clib/u8x8_d_st7567.c
index c544e465..a7f1ddf5 100644
--- a/src/clib/u8x8_d_st7567.c
+++ b/src/clib/u8x8_d_st7567.c
@@ -40,6 +40,7 @@
 
 static const uint8_t u8x8_d_st7567_132x64_powersave0_seq[] = {
   U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  U8X8_C(0x0a4),		                /* all pixel off, issue 142 */
   U8X8_C(0x0af),		                /* display on */
   U8X8_END_TRANSFER(),             	/* disable chip */
   U8X8_END()             			/* end of sequence */
@@ -48,6 +49,7 @@ static const uint8_t u8x8_d_st7567_132x64_powersave0_seq[] = {
 static const uint8_t u8x8_d_st7567_132x64_powersave1_seq[] = {
   U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
   U8X8_C(0x0ae),		                /* display off */
+  U8X8_C(0x0a5),		                /* enter powersafe: all pixel on, issue 142 */
   U8X8_END_TRANSFER(),             	/* disable chip */
   U8X8_END()             			/* end of sequence */
 };
@@ -119,8 +121,10 @@ static const uint8_t u8x8_d_st7567_132x64_init_seq[] = {
   
   U8X8_C(0x026),		                /* v0 voltage resistor ratio */
   U8X8_CA(0x081, 0x027),		/* set contrast, contrast value*/
-  U8X8_C(0x0a4),		                /* normal display  */
   
+  U8X8_C(0x0ae),		                /* display off */
+  U8X8_C(0x0a5),		                /* enter powersafe: all pixel on, issue 142 */
+   
   U8X8_END_TRANSFER(),             	/* disable chip */
   U8X8_END()             			/* end of sequence */
 };
diff --git a/src/clib/u8x8_d_uc1701_dogs102.c b/src/clib/u8x8_d_uc1701_dogs102.c
index 3a0e202a..7d0fc3e4 100644
--- a/src/clib/u8x8_d_uc1701_dogs102.c
+++ b/src/clib/u8x8_d_uc1701_dogs102.c
@@ -59,7 +59,9 @@ static const uint8_t u8x8_d_uc1701_dogs102_init_seq[] = {
   U8X8_CA(0x081, 0x00e),		/* set contrast, contrast value, EA default: 0x010, previous value for S102: 0x0e */
   U8X8_C(0x0fa),		                /* Set Temp compensation */ 
   U8X8_C(0x090),		                /* 0.11 deg/c WP Off WC Off*/
-  U8X8_C(0x0a4),		                /* normal display  */
+  
+  U8X8_C(0x0ae),		                /* display off */
+  U8X8_C(0x0a5),		                /* enter powersafe: all pixel on, issue 142 */
   
   U8X8_END_TRANSFER(),             	/* disable chip */
   U8X8_END()             			/* end of sequence */
@@ -67,6 +69,7 @@ static const uint8_t u8x8_d_uc1701_dogs102_init_seq[] = {
 
 static const uint8_t u8x8_d_uc1701_dogs102_powersave0_seq[] = {
   U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  U8X8_C(0x0a4),		                /* all pixel off, issue 142 */
   U8X8_C(0x0af),		                /* display on */
   U8X8_END_TRANSFER(),             	/* disable chip */
   U8X8_END()             			/* end of sequence */
@@ -75,6 +78,7 @@ static const uint8_t u8x8_d_uc1701_dogs102_powersave0_seq[] = {
 static const uint8_t u8x8_d_uc1701_dogs102_powersave1_seq[] = {
   U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
   U8X8_C(0x0ae),		                /* display off */
+  U8X8_C(0x0a5),		                /* enter powersafe: all pixel on, issue 142 */
   U8X8_END_TRANSFER(),             	/* disable chip */
   U8X8_END()             			/* end of sequence */
 };
diff --git a/src/clib/u8x8_d_uc1701_mini12864.c b/src/clib/u8x8_d_uc1701_mini12864.c
index dd9f5e7c..2fd53d4d 100644
--- a/src/clib/u8x8_d_uc1701_mini12864.c
+++ b/src/clib/u8x8_d_uc1701_mini12864.c
@@ -60,7 +60,8 @@ static const uint8_t u8x8_d_uc1701_mini12864_init_seq[] = {
   U8X8_C(0x0ac),		/* indicator */
   //  0x000,		/* disable */
   
-  U8X8_C(0x0a4),		                /* normal display  */
+  U8X8_C(0x0ae),		                /* display off */
+  U8X8_C(0x0a5),		                /* enter powersafe: all pixel on, issue 142 */
   
   U8X8_END_TRANSFER(),             	/* disable chip */
   U8X8_END()             			/* end of sequence */
@@ -68,6 +69,7 @@ static const uint8_t u8x8_d_uc1701_mini12864_init_seq[] = {
 
 static const uint8_t u8x8_d_uc1701_mini12864_powersave0_seq[] = {
   U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  U8X8_C(0x0a4),		                /* all pixel off, issue 142 */
   U8X8_C(0x0af),		                /* display on */
   U8X8_END_TRANSFER(),             	/* disable chip */
   U8X8_END()             			/* end of sequence */
@@ -76,6 +78,7 @@ static const uint8_t u8x8_d_uc1701_mini12864_powersave0_seq[] = {
 static const uint8_t u8x8_d_uc1701_mini12864_powersave1_seq[] = {
   U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
   U8X8_C(0x0ae),		                /* display off */
+  U8X8_C(0x0a5),		                /* enter powersafe: all pixel on, issue 142 */
   U8X8_END_TRANSFER(),             	/* disable chip */
   U8X8_END()             			/* end of sequence */
 };