Add files via upload

athom-smart-plug.yaml

@@ -0,0 +1,177 @@
+substitutions:
+  name: "athom-smart-plug-v3"
+  friendly_name: "Smart Plug V3"
+  room: ""
+  device_description: "athom esp32c3 smart plug"
+  project_name: "Athom Technology.Smart Plug V3"
+  project_version: "1.0"
+
+esphome:
+  name: "${name}"
+  friendly_name: "${friendly_name}"
+  name_add_mac_suffix: true
+  project:
+    name: "${project_name}"
+    version: "${project_version}"
+  platformio_options:
+    board_build.mcu: esp32c3
+    board_build.variant: esp32c3
+    board_build.flash_mode: dio
+
+esp32:
+  board: esp32-c3-devkitm-1
+  variant: ESP32C3
+  framework:
+    type: esp-idf
+    version: recommended
+
+api:
+
+ota:
+
+logger:
+  baud_rate: 0
+
+mdns:
+  disabled: false
+
+web_server:
+  port: 80
+
+wifi:
+  ap: {} # This spawns an AP with the device name and mac address with no password.
+
+captive_portal:
+
+dashboard_import:
+  package_import_url: github://athom-tech/esp32-configs/athom-smart-plug.yaml
+
+uart:
+  rx_pin: GPIO20
+  baud_rate: 4800
+
+globals:
+  - id: total_energy
+    type: float
+    restore_value: yes
+    initial_value: '0.0'
+
+binary_sensor:
+  - platform: status
+    name: "Status"
+
+  - platform: gpio
+    pin:
+      number: GPIO3
+      mode: INPUT_PULLUP
+      inverted: true
+    name: "Power Button"
+    disabled_by_default: true
+    on_multi_click:
+      - timing:
+          - ON for at most 1s
+          - OFF for at least 0.2s
+        then:
+          - switch.toggle: relay
+      - timing:
+          - ON for at least 4s
+        then:
+          - button.press: Reset
+
+sensor:
+  - platform: uptime
+    name: "Uptime Sensor"
+
+  - platform: wifi_signal
+    name: "WiFi Signal"
+    update_interval: 60s
+
+  - platform: cse7766
+    update_interval: 5s
+    current:
+      name: "Current"
+      filters:
+          - lambda: if (x < 0.060) return 0.0; else return x;   #For the chip will report less than 3w power when no load is connected
+
+
+    voltage:
+      name: "Voltage"
+    power:
+      name: "Power"
+      id: power_sensor
+      filters:
+          - lambda: if (x < 3.0) return 0.0; else return x;    #For the chip will report less than 3w power when no load is connected
+
+
+    energy:
+      name: "Energy"
+      id: energy
+      unit_of_measurement: kWh
+      filters:
+        # Multiplication factor from W to kW is 0.001
+        - multiply: 0.001
+      on_value:
+        then:
+          - lambda: |-
+              static float previous_energy_value = 0.0;
+              float current_energy_value = id(energy).state;
+              id(total_energy) += current_energy_value - previous_energy_value;
+              previous_energy_value = current_energy_value;
+
+  - platform: template
+    name: "Total Energy"
+    unit_of_measurement: kWh
+    device_class: "energy"
+    state_class: "total_increasing"
+    icon: "mdi:lightning-bolt"
+    accuracy_decimals: 3
+    lambda: |-
+      return id(total_energy);
+    update_interval: 10s
+
+  - platform: total_daily_energy
+    name: "Total Daily Energy"
+    restore: true
+    power_id: power_sensor
+    unit_of_measurement: kWh
+    accuracy_decimals: 3
+    filters:
+      - multiply: 0.001
+
+
+button:
+  - platform: factory_reset
+    name: "Restart with Factory Default Settings"
+    id: Reset
+
+  - platform: safe_mode
+    name: "Safe Mode"
+    internal: false
+
+switch:
+  - platform: gpio
+    name: "${friendly_name}"
+    pin: GPIO5
+    id: relay
+
+light:
+  - platform: status_led
+    name: "Status LED"
+    id: blue_led
+    disabled_by_default: true
+    pin:
+      inverted: true
+      number: GPIO6
+
+text_sensor:
+  - platform: wifi_info
+    ip_address:
+      name: "IP Address"
+    ssid:
+      name: "Connected SSID"
+    mac_address:
+      name: "Mac Address"
+
+time:
+  - platform: sntp
+    id: sntp_time