Modify version number

athom-ld2450-sensor.yaml

@@ -3,8 +3,8 @@ substitutions:
   friendly_name: "PS02C3MZ Sensor"
   room: ""
   device_description: "athom esp32c3 ld2450 motion target tracking sensor"
-  project_name: "Athom Technology.PS02C3MZ LD2450"
-  project_version: "v2.0.3"
+  project_name: "China Athom Technology.PS02C3MZ LD2450"
+  project_version: "v2.0.4"
   update_interval: 60s
   # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
   dns_domain: ""
@@ -39,9 +39,18 @@ esphome:
 esp32:
   board: esp32-c3-devkitm-1
   flash_size: 4MB
+  variant: ESP32C3
   framework:
     type: esp-idf
     version: recommended
+    sdkconfig_options:
+      # @grigi found in testing that these options resulted in better responsiveness.
+      # BLE 4.2 is supported by ALL ESP32 boards that have bluetooth, the original and derivatives.
+      CONFIG_BT_BLE_42_FEATURES_SUPPORTED: y
+      # Also enable this on any derivative boards (S2, C3 etc) but not the original ESP32.
+      CONFIG_BT_BLE_50_FEATURES_SUPPORTED: y
+      # Extend the watchdog timeout, so the device reboots if the device appears locked up for over 10 seconds.
+      CONFIG_ESP_TASK_WDT_TIMEOUT_S: "10"
 
 # Enable logging
 logger:
@@ -73,7 +82,13 @@ captive_portal:
 
 esp32_ble_tracker:
   scan_parameters:
+    # Don't auto start BLE scanning, we control it in the `api` block's automation.
     continuous: false
+    active: true  # send scan-request packets to gather more info, like device name for some devices.
+    interval: 320ms  # default 320ms - how long to spend on each advert channel
+    window:   300ms  # default 30ms - how long to actually "listen" in each interval. Reduce this if device is unstable.
+    # If the device cannot keep up or becomes unstable, reduce the "window" setting. This may be
+    # required if your device is controlling other sensors or doing PWM for lights etc.
 
 # Enable Home Assistant API
 api: