esp32-configs/athom-smart-plug.yaml

substitutions:
  name: "athom-smart-plug-v3"
  friendly_name: "Athom Plug V3"
  room: ""
  device_description: "athom esp32c3 smart plug"
  project_name: "Athom Technology.Smart Plug V3"
  project_version: "ESP32C3"
  relay_restore_mode: RESTORE_DEFAULT_OFF
  hidden_ssid: "false"
  sensor_update_interval: 10s

esphome:
  name: "${name}"
  friendly_name: "${friendly_name}"
  name_add_mac_suffix: true
  project:
    name: "${project_name}"
    version: "${project_version}"
  platformio_options:
    board_build.mcu: esp32c3
    board_build.variant: esp32c3
    board_build.flash_mode: dio

esp32:
  board: esp32-c3-devkitm-1
  flash_size: 4MB
  variant: ESP32C3
  framework:
    type: arduino
    version: recommended

preferences:
  flash_write_interval: 5min

api:

ota:

logger:
  baud_rate: 0

mdns:
  disabled: false

web_server:
  port: 80

wifi:
  fast_connect: ${hidden_ssid}
  ap: {}

captive_portal:

dashboard_import:
  package_import_url: github://athom-tech/esp32-configs/athom-smart-plug.yaml

uart:
  rx_pin: GPIO20
  baud_rate: 4800
  data_bits: 8
  stop_bits: 1
  parity: EVEN

globals:
  - id: total_energy
    type: float
    restore_value: yes
    initial_value: '0.0'

binary_sensor:
  - platform: status
    name: "Status"
    entity_category: diagnostic

  - platform: gpio
    pin:
      number: GPIO3
      mode: INPUT_PULLUP
      inverted: true
    name: "Power Button"
    disabled_by_default: true
    on_multi_click:
      - timing:
          - ON for at most 1s
          - OFF for at least 0.2s
        then:
          - switch.toggle: relay
      - timing:
          - ON for at least 4s
        then:
          - button.press: Reset
sensor:
  - platform: uptime
    name: "Uptime Sensor"
    id: uptime_sensor
    entity_category: diagnostic
    internal: True

  - platform: wifi_signal
    name: "WiFi Signal"
    id: wifi_signal_db
    update_interval: 60s
    entity_category: diagnostic
    internal: true

  # Reports the WiFi signal strength in %
  - platform: copy
    source_id: wifi_signal_db
    name: "WiFi Strength"
    filters:
      - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
    unit_of_measurement: "%"
    entity_category: diagnostic


  - platform: cse7766
    current:
      name: "Current"
      filters:
          - throttle_average: ${sensor_update_interval}
          - lambda: if (x < 0.060) return 0.0; else return x;   #For the chip will report less than 3w power when no load is connected


    voltage:
      name: "Voltage"
      filters:
          - throttle_average: ${sensor_update_interval}

    power:
      name: "Power"
      id: power_sensor
      filters:
          - throttle_average: ${sensor_update_interval}
          - lambda: if (x < 3.0) return 0.0; else return x;    #For the chip will report less than 3w power when no load is connected


    energy:
      name: "Energy"
      id: energy
      unit_of_measurement: kWh
      filters:
        - throttle_average: ${sensor_update_interval}
        # Multiplication factor from W to kW is 0.001
        - multiply: 0.001
        - filter_out: nan
      on_value:
        then:
          - lambda: |-
              static float previous_energy_value = 0.0;
              float current_energy_value = id(energy).state;
              id(total_energy) += current_energy_value - previous_energy_value;
              previous_energy_value = current_energy_value;

  - platform: template
    name: "Total Energy"
    unit_of_measurement: kWh
    device_class: "energy"
    state_class: "total_increasing"
    icon: "mdi:lightning-bolt"
    accuracy_decimals: 3
    lambda: |-
      return id(total_energy);
    update_interval: ${sensor_update_interval}

  - platform: total_daily_energy
    name: "Total Daily Energy"
    restore: true
    power_id: power_sensor
    unit_of_measurement: kWh
    accuracy_decimals: 3
    filters:
      - multiply: 0.001

button:
  - platform: factory_reset
    name: "Restart with Factory Default Settings"
    id: Reset

  - platform: safe_mode
    name: "Safe Mode"
    internal: false
    entity_category: config

switch:
  - platform: gpio
    name: "Power"
    pin: GPIO5
    id: relay
    restore_mode: ${relay_restore_mode}

light:
  - platform: status_led
    name: "Status LED"
    id: blue_led
    disabled_by_default: true
    pin:
      inverted: true
      number: GPIO6

text_sensor:
  - platform: wifi_info
    ip_address:
      name: "IP Address"
      entity_category: diagnostic
    ssid:
      name: "Connected SSID"
      entity_category: diagnostic
    mac_address:
      name: "Mac Address"
      entity_category: diagnostic

  #  Creates a sensor showing when the device was last restarted
  - platform: template
    name: 'Device Last Restart'
    id: device_last_restart
    icon: mdi:clock
    entity_category: diagnostic
#    device_class: timestamp

  #  Creates a sensor of the uptime of the device, in formatted days, hours, minutes and seconds
  - platform: template
    name: "Device Uptime"
    entity_category: diagnostic
    lambda: |-
      int seconds = (id(uptime_sensor).state);
      int days = seconds / (24 * 3600);
      seconds = seconds % (24 * 3600);
      int hours = seconds / 3600;
      seconds = seconds % 3600;
      int minutes = seconds /  60;
      seconds = seconds % 60;
      if ( days > 3650 ) {
        return { "Starting up" };
      } else if ( days ) {
        return { (String(days) +"d " + String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
      } else if ( hours ) {
        return { (String(hours) +"h " + String(minutes) +"m "+ String(seconds) +"s").c_str() };
      } else if ( minutes ) {
        return { (String(minutes) +"m "+ String(seconds) +"s").c_str() };
      } else {
        return { (String(seconds) +"s").c_str() };
      }
    icon: mdi:clock-start

time:
  - platform: sntp
    id: sntp_time
  # Change sync interval from default 5min to 6 hours
    update_interval: 360min    
  # Publish the time the device was last restarted
    on_time_sync:
      then:
        # Update last restart time, but only once.
        - if:
            condition:
              lambda: 'return id(device_last_restart).state == "";'
            then:
              - text_sensor.template.publish:
                  id: device_last_restart
                  state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'