mirror of
https://github.com/athom-tech/esp32-configs.git
synced 2026-07-28 04:05:53 +00:00
395 lines
9.3 KiB
YAML
395 lines
9.3 KiB
YAML
substitutions:
|
|
name: "athom-8ch-relay-board"
|
|
friendly_name: "Athom 8CH Relay Board"
|
|
room: ""
|
|
device_description: "athom esp32 8ch relay board"
|
|
project_name: "Athom Technology.ESP32 8CH Relay Board"
|
|
project_version: "v2.0.5"
|
|
update_interval: 60s
|
|
# Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
|
|
dns_domain: ".local"
|
|
# Set timezone of the smart plug. Useful if the plug is in a location different to the HA server. Can be entered in unix Country/Area format (i.e. "Australia/Sydney")
|
|
timezone: ""
|
|
# Set the duration between the sntp service polling ntp.org servers for an update
|
|
sntp_update_interval: 6h
|
|
# Network time servers for your region, enter from lowest to highest priority. To use local servers update as per zones or countries at: https://www.ntppool.org/zone/@
|
|
sntp_server_1: "0.pool.ntp.org"
|
|
sntp_server_2: "1.pool.ntp.org"
|
|
sntp_server_3: "2.pool.ntp.org"
|
|
# Enables faster network connections, with last connected SSID being connected to and no full scan for SSID being undertaken
|
|
wifi_fast_connect: "false"
|
|
# Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
|
log_level: "DEBUG"
|
|
# Enable or disable the use of IPv6 networking on the device
|
|
ipv6_enable: "false"
|
|
relay1_restore_mode: RESTORE_DEFAULT_OFF
|
|
relay2_restore_mode: RESTORE_DEFAULT_OFF
|
|
relay3_restore_mode: RESTORE_DEFAULT_OFF
|
|
relay4_restore_mode: RESTORE_DEFAULT_OFF
|
|
relay5_restore_mode: RESTORE_DEFAULT_OFF
|
|
relay6_restore_mode: RESTORE_DEFAULT_OFF
|
|
relay7_restore_mode: RESTORE_DEFAULT_OFF
|
|
relay8_restore_mode: RESTORE_DEFAULT_OFF
|
|
|
|
esphome:
|
|
name: "${name}"
|
|
friendly_name: "${friendly_name}"
|
|
comment: "${device_description}"
|
|
area: "${room}"
|
|
name_add_mac_suffix: true
|
|
min_version: 2025.7.0
|
|
project:
|
|
name: "${project_name}"
|
|
version: "${project_version}"
|
|
platformio_options:
|
|
board_build.flash_mode: dio
|
|
|
|
esp32:
|
|
board: esp32dev
|
|
flash_size: 4MB
|
|
framework:
|
|
type: esp-idf
|
|
version: recommended
|
|
|
|
preferences:
|
|
flash_write_interval: 5min
|
|
|
|
# Enable logging
|
|
logger:
|
|
baud_rate: 115200
|
|
level: ${log_level}
|
|
|
|
mdns:
|
|
disabled: false
|
|
|
|
web_server:
|
|
port: 80
|
|
|
|
# Enable Home Assistant API
|
|
api:
|
|
|
|
ota:
|
|
- platform: esphome
|
|
|
|
network:
|
|
enable_ipv6: ${ipv6_enable}
|
|
|
|
wifi:
|
|
# This spawns an AP with the device name and mac address with no password.
|
|
ap: {}
|
|
# Allow rapid re-connection to previously connect WiFi SSID, skipping scan of all SSID
|
|
fast_connect: "${wifi_fast_connect}"
|
|
# Define dns domain / suffix to add to hostname
|
|
domain: "${dns_domain}"
|
|
|
|
captive_portal:
|
|
|
|
improv_serial:
|
|
|
|
esp32_improv:
|
|
authorizer: none
|
|
|
|
dashboard_import:
|
|
package_import_url: github://athom-tech/esp32-configs/athom-8ch-relay-board.yaml
|
|
|
|
# esp32_ble_tracker:
|
|
# scan_parameters:
|
|
# interval: 1100ms
|
|
# window: 1100ms
|
|
# active: true
|
|
|
|
# bluetooth_proxy:
|
|
# active: true
|
|
|
|
remote_receiver:
|
|
pin: GPIO17
|
|
dump: rc_switch
|
|
id: "rc_switch_receiver"
|
|
|
|
binary_sensor:
|
|
- platform: status
|
|
name: "Status"
|
|
entity_category: "diagnostic"
|
|
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO26
|
|
mode:
|
|
input: true
|
|
inverted: true
|
|
name: "Power Button1"
|
|
disabled_by_default: true
|
|
on_multi_click:
|
|
- timing:
|
|
- ON for at most 1s
|
|
- OFF for at least 0.2s
|
|
then:
|
|
- switch.toggle: relay1
|
|
- timing:
|
|
- ON for at least 4s
|
|
then:
|
|
- button.press: Reset
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO25
|
|
mode:
|
|
input: true
|
|
inverted: true
|
|
name: "Power Button2"
|
|
disabled_by_default: true
|
|
on_multi_click:
|
|
- timing:
|
|
- ON for at most 1s
|
|
- OFF for at least 0.2s
|
|
then:
|
|
- switch.toggle: relay2
|
|
- timing:
|
|
- ON for at least 4s
|
|
then:
|
|
- button.press: Reset
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO33
|
|
mode:
|
|
input: true
|
|
inverted: true
|
|
name: "Power Button3"
|
|
disabled_by_default: true
|
|
on_multi_click:
|
|
- timing:
|
|
- ON for at most 1s
|
|
- OFF for at least 0.2s
|
|
then:
|
|
- switch.toggle: relay3
|
|
- timing:
|
|
- ON for at least 4s
|
|
then:
|
|
- button.press: Reset
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO32
|
|
mode:
|
|
input: true
|
|
inverted: true
|
|
name: "Power Button4"
|
|
disabled_by_default: true
|
|
on_multi_click:
|
|
- timing:
|
|
- ON for at most 1s
|
|
- OFF for at least 0.2s
|
|
then:
|
|
- switch.toggle: relay4
|
|
- timing:
|
|
- ON for at least 4s
|
|
then:
|
|
- button.press: Reset
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO35
|
|
mode:
|
|
input: true
|
|
inverted: true
|
|
name: "Power Button5"
|
|
disabled_by_default: true
|
|
on_multi_click:
|
|
- timing:
|
|
- ON for at most 1s
|
|
- OFF for at least 0.2s
|
|
then:
|
|
- switch.toggle: relay5
|
|
- timing:
|
|
- ON for at least 4s
|
|
then:
|
|
- button.press: Reset
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO34
|
|
mode:
|
|
input: true
|
|
inverted: true
|
|
name: "Power Button6"
|
|
disabled_by_default: true
|
|
on_multi_click:
|
|
- timing:
|
|
- ON for at most 1s
|
|
- OFF for at least 0.2s
|
|
then:
|
|
- switch.toggle: relay6
|
|
- timing:
|
|
- ON for at least 4s
|
|
then:
|
|
- button.press: Reset
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO39
|
|
mode:
|
|
input: true
|
|
inverted: true
|
|
name: "Power Button7"
|
|
disabled_by_default: true
|
|
on_multi_click:
|
|
- timing:
|
|
- ON for at most 1s
|
|
- OFF for at least 0.2s
|
|
then:
|
|
- switch.toggle: relay7
|
|
- timing:
|
|
- ON for at least 4s
|
|
then:
|
|
- button.press: Reset
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO36
|
|
mode:
|
|
input: true
|
|
inverted: true
|
|
name: "Power Button8"
|
|
disabled_by_default: true
|
|
on_multi_click:
|
|
- timing:
|
|
- ON for at most 1s
|
|
- OFF for at least 0.2s
|
|
then:
|
|
- switch.toggle: relay8
|
|
- timing:
|
|
- ON for at least 4s
|
|
then:
|
|
- button.press: Reset
|
|
sensor:
|
|
- platform: uptime
|
|
name: "Uptime Sensor"
|
|
id: uptime_sensor
|
|
type:
|
|
timestamp
|
|
entity_category: "diagnostic"
|
|
|
|
- platform: wifi_signal # Reports the WiFi signal strength/RSSI in dB
|
|
name: "WiFi Signal dB"
|
|
id: wifi_signal_db
|
|
update_interval: "${update_interval}"
|
|
entity_category: "diagnostic"
|
|
|
|
- platform: copy # Reports the WiFi signal strength in %
|
|
source_id: wifi_signal_db
|
|
name: "WiFi Signal Percent"
|
|
filters:
|
|
- lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
|
|
unit_of_measurement: "Signal %"
|
|
entity_category: "diagnostic"
|
|
device_class: ""
|
|
|
|
button:
|
|
- platform: restart
|
|
name: "Restart"
|
|
entity_category: "config"
|
|
|
|
- platform: factory_reset
|
|
name: "Factory Reset"
|
|
id: Reset
|
|
entity_category: "config"
|
|
|
|
- platform: safe_mode
|
|
name: "Safe Mode"
|
|
internal: false
|
|
entity_category: "config"
|
|
|
|
switch:
|
|
# Relay
|
|
- platform: gpio
|
|
name: "Relay1"
|
|
pin: GPIO27
|
|
id: relay1
|
|
restore_mode: ${relay1_restore_mode}
|
|
|
|
- platform: gpio
|
|
name: "Relay2"
|
|
pin: GPIO14
|
|
id: relay2
|
|
restore_mode: ${relay2_restore_mode}
|
|
|
|
- platform: gpio
|
|
name: "Relay3"
|
|
pin: GPIO12
|
|
id: relay3
|
|
restore_mode: ${relay3_restore_mode}
|
|
|
|
- platform: gpio
|
|
name: "Relay4"
|
|
pin: GPIO13
|
|
id: relay4
|
|
restore_mode: ${relay4_restore_mode}
|
|
|
|
- platform: gpio
|
|
name: "Relay5"
|
|
pin: GPIO2
|
|
id: relay5
|
|
restore_mode: ${relay5_restore_mode}
|
|
|
|
- platform: gpio
|
|
name: "Relay6"
|
|
pin: GPIO4
|
|
id: relay6
|
|
restore_mode: ${relay6_restore_mode}
|
|
|
|
- platform: gpio
|
|
name: "Relay7"
|
|
pin: GPIO5
|
|
id: relay7
|
|
restore_mode: ${relay7_restore_mode}
|
|
|
|
- platform: gpio
|
|
name: "Relay8"
|
|
pin: GPIO18
|
|
id: relay8
|
|
restore_mode: ${relay8_restore_mode}
|
|
|
|
light:
|
|
- platform: status_led
|
|
name: "Status LED"
|
|
disabled_by_default: true
|
|
pin: GPIO15
|
|
|
|
text_sensor:
|
|
- platform: wifi_info
|
|
ip_address:
|
|
name: "IP Address"
|
|
entity_category: "diagnostic"
|
|
ssid:
|
|
name: "Connected SSID"
|
|
entity_category: "diagnostic"
|
|
mac_address:
|
|
name: "Mac Address"
|
|
entity_category: "diagnostic"
|
|
|
|
# Creates a sensor showing when the device was last restarted
|
|
- platform: template
|
|
name: 'Last Restart'
|
|
id: device_last_restart
|
|
icon: mdi:clock
|
|
entity_category: "diagnostic"
|
|
# device_class: timestamp
|
|
|
|
time:
|
|
- platform: sntp
|
|
id: sntp_time
|
|
# Define the timezone of the device
|
|
timezone: "${timezone}"
|
|
# Change sync interval from default 5min to 6 hours (or as set in substitutions)
|
|
update_interval: ${sntp_update_interval}
|
|
# Set specific sntp servers to use
|
|
servers:
|
|
- "${sntp_server_1}"
|
|
- "${sntp_server_2}"
|
|
- "${sntp_server_3}"
|
|
# Publish the time the device was last restarted
|
|
on_time_sync:
|
|
then:
|
|
# Update last restart time, but only once.
|
|
- if:
|
|
condition:
|
|
lambda: 'return id(device_last_restart).state == "";'
|
|
then:
|
|
- text_sensor.template.publish:
|
|
id: device_last_restart
|
|
state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'
|