mirror of
https://github.com/athom-tech/esp32-configs.git
synced 2026-07-28 04:05:53 +00:00
378 lines
8.6 KiB
YAML
378 lines
8.6 KiB
YAML
substitutions:
|
|
name: "athom-ps02c3mz-sensor"
|
|
friendly_name: "PS02C3MZ Sensor"
|
|
room: ""
|
|
device_description: "athom esp32c3 ld2450 motion target tracking sensor"
|
|
project_name: "Athom Technology.PS02C3MZ LD2450"
|
|
project_version: "v2.0.0"
|
|
update_interval: 60s
|
|
# Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
|
|
dns_domain: ""
|
|
# Set timezone of the smart plug. Useful if the plug is in a location different to the HA server. Can be entered in unix Country/Area format (i.e. "Australia/Sydney")
|
|
timezone: ""
|
|
# Set the duration between the sntp service polling ntp.org servers for an update
|
|
sntp_update_interval: 6h
|
|
# Network time servers for your region, enter from lowest to highest priority. To use local servers update as per zones or countries at: https://www.ntppool.org/zone/@
|
|
sntp_server_1: "0.pool.ntp.org"
|
|
sntp_server_2: "1.pool.ntp.org"
|
|
sntp_server_3: "2.pool.ntp.org"
|
|
# Enables faster network connections, with last connected SSID being connected to and no full scan for SSID being undertaken
|
|
wifi_fast_connect: "false"
|
|
# Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
|
log_level: "NONE"
|
|
# Enable or disable the use of IPv6 networking on the device
|
|
ipv6_enable: "false"
|
|
|
|
esphome:
|
|
name: "${name}"
|
|
friendly_name: "${friendly_name}"
|
|
area: "${room}"
|
|
name_add_mac_suffix: true
|
|
min_version: 2025.7.0
|
|
project:
|
|
name: "${project_name}"
|
|
version: "${project_version}"
|
|
platformio_options:
|
|
board_build.flash_mode: dio
|
|
|
|
esp32:
|
|
board: esp32-c3-devkitm-1
|
|
flash_size: 4MB
|
|
framework:
|
|
type: esp-idf
|
|
version: recommended
|
|
|
|
# Enable logging
|
|
logger:
|
|
baud_rate: 115200
|
|
hardware_uart: UART0
|
|
level: ${log_level}
|
|
|
|
mdns:
|
|
disabled: false
|
|
|
|
web_server:
|
|
port: 80
|
|
|
|
# Enable Home Assistant API
|
|
api:
|
|
|
|
ota:
|
|
- platform: esphome
|
|
|
|
network:
|
|
enable_ipv6: ${ipv6_enable}
|
|
|
|
wifi:
|
|
# This spawns an AP with the device name and mac address with no password.
|
|
ap: {}
|
|
# Allow rapid re-connection to previously connect WiFi SSID, skipping scan of all SSID
|
|
fast_connect: "${wifi_fast_connect}"
|
|
# Define dns domain / suffix to add to hostname
|
|
domain: "${dns_domain}"
|
|
|
|
captive_portal:
|
|
|
|
esp32_improv:
|
|
authorizer: none
|
|
|
|
dashboard_import:
|
|
package_import_url: github://athom-tech/esp32-configs/athom-ld2450-sensor.yaml
|
|
|
|
light:
|
|
- platform: status_led
|
|
name: "Status LED"
|
|
id: led
|
|
pin: GPIO2
|
|
disabled_by_default: true
|
|
entity_category: config
|
|
|
|
i2c:
|
|
sda: GPIO18
|
|
scl: GPIO19
|
|
scan: true
|
|
|
|
uart:
|
|
id: uart_ld2450
|
|
tx_pin: GPIO8
|
|
rx_pin: GPIO5
|
|
baud_rate: 256000
|
|
parity: NONE
|
|
stop_bits: 1
|
|
|
|
ld2450:
|
|
id: ld2450_radar
|
|
uart_id: uart_ld2450
|
|
throttle: 1000ms
|
|
|
|
button:
|
|
- platform: ld2450
|
|
ld2450_id: ld2450_radar
|
|
factory_reset:
|
|
name: "LD2450 Factory Reset"
|
|
entity_category: "config"
|
|
restart:
|
|
name: "LD2450 Restart"
|
|
entity_category: "config"
|
|
|
|
- platform: factory_reset
|
|
name: Restart with Factory Default Settings
|
|
id: Reset
|
|
entity_category: config
|
|
|
|
- platform: restart
|
|
name: Restart_esp
|
|
id: restart_esp
|
|
entity_category: config
|
|
|
|
- platform: safe_mode
|
|
name: "Safe Mode"
|
|
internal: false
|
|
entity_category: config
|
|
|
|
sensor:
|
|
- platform: ld2450
|
|
ld2450_id: ld2450_radar
|
|
target_count:
|
|
name: Presence Target Count
|
|
still_target_count:
|
|
name: Still Target Count
|
|
moving_target_count:
|
|
name: Moving Target Count
|
|
target_1:
|
|
x:
|
|
name: Target-1 X
|
|
y:
|
|
name: Target-1 Y
|
|
speed:
|
|
name: Target-1 Speed
|
|
angle:
|
|
name: Target-1 Angle
|
|
distance:
|
|
name: Target-1 Distance
|
|
resolution:
|
|
name: Target-1 Resolution
|
|
target_2:
|
|
x:
|
|
name: Target-2 X
|
|
y:
|
|
name: Target-2 Y
|
|
speed:
|
|
name: Target-2 Speed
|
|
angle:
|
|
name: Target-2 Angle
|
|
distance:
|
|
name: Target-2 Distance
|
|
resolution:
|
|
name: Target-2 Resolution
|
|
target_3:
|
|
x:
|
|
name: Target-3 X
|
|
y:
|
|
name: Target-3 Y
|
|
speed:
|
|
name: Target-3 Speed
|
|
angle:
|
|
name: Target-3 Angle
|
|
distance:
|
|
name: Target-3 Distance
|
|
resolution:
|
|
name: Target-3 Resolution
|
|
zone_1:
|
|
target_count:
|
|
name: Zone-1 All Target Count
|
|
still_target_count:
|
|
name: Zone-1 Still Target Count
|
|
moving_target_count:
|
|
name: Zone-1 Moving Target Count
|
|
zone_2:
|
|
target_count:
|
|
name: Zone-2 All Target Count
|
|
still_target_count:
|
|
name: Zone-2 Still Target Count
|
|
moving_target_count:
|
|
name: Zone-2 Moving Target Count
|
|
zone_3:
|
|
target_count:
|
|
name: Zone-3 All Target Count
|
|
still_target_count:
|
|
name: Zone-3 Still Target Count
|
|
moving_target_count:
|
|
name: Zone-3 Moving Target Count
|
|
|
|
- platform: uptime
|
|
name: "Uptime Sensor"
|
|
id: uptime_sensor
|
|
type:
|
|
timestamp
|
|
entity_category: "diagnostic"
|
|
|
|
- platform: wifi_signal
|
|
name: "WiFi Signal dB"
|
|
id: wifi_signal_db
|
|
update_interval: 60s
|
|
entity_category: "diagnostic"
|
|
|
|
- platform: copy
|
|
source_id: wifi_signal_db
|
|
name: "WiFi Signal Percent"
|
|
filters:
|
|
- lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
|
|
unit_of_measurement: "Signal %"
|
|
entity_category: "diagnostic"
|
|
device_class: ""
|
|
|
|
- platform: bh1750
|
|
name: "Light Sensor"
|
|
id: "bh1750_sensor"
|
|
address: 0x23
|
|
update_interval: 5s
|
|
|
|
binary_sensor:
|
|
- platform: ld2450
|
|
ld2450_id: ld2450_radar
|
|
has_target:
|
|
name: Presence
|
|
has_moving_target:
|
|
name: Moving Target
|
|
has_still_target:
|
|
name: Still Target
|
|
|
|
- platform: status
|
|
name: "Status"
|
|
entity_category: diagnostic
|
|
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO9
|
|
mode: INPUT_PULLUP
|
|
inverted: true
|
|
name: "Button"
|
|
disabled_by_default: true
|
|
on_multi_click:
|
|
- timing:
|
|
- ON for at least 4s
|
|
then:
|
|
- button.press: Reset
|
|
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO3
|
|
mode:
|
|
input: true
|
|
pullup: true
|
|
name: "Pir Sensor"
|
|
id: pir
|
|
filters:
|
|
- delayed_on: 50ms
|
|
- delayed_off: 10s
|
|
device_class: motion
|
|
|
|
switch:
|
|
- platform: ld2450
|
|
ld2450_id: ld2450_radar
|
|
bluetooth:
|
|
name: "Bluetooth"
|
|
multi_target:
|
|
name: "Multi Target Tracking"
|
|
|
|
text_sensor:
|
|
- platform: ld2450
|
|
ld2450_id: ld2450_radar
|
|
version:
|
|
name: "LD2450 Firmware"
|
|
mac_address:
|
|
name: "LD2450 BT MAC"
|
|
target_1:
|
|
direction:
|
|
name: "Target-1 Direction"
|
|
target_2:
|
|
direction:
|
|
name: "Target-2 Direction"
|
|
target_3:
|
|
direction:
|
|
name: "Target-3 Direction"
|
|
|
|
- platform: wifi_info
|
|
ip_address:
|
|
name: "IP Address"
|
|
entity_category: diagnostic
|
|
ssid:
|
|
name: "Connected SSID"
|
|
entity_category: diagnostic
|
|
mac_address:
|
|
name: "Mac Address"
|
|
entity_category: diagnostic
|
|
|
|
# Creates a sensor showing when the device was last restarted
|
|
- platform: template
|
|
name: 'Last Restart'
|
|
id: device_last_restart
|
|
icon: mdi:clock
|
|
entity_category: diagnostic
|
|
# device_class: timestamp
|
|
|
|
number:
|
|
- platform: ld2450
|
|
ld2450_id: ld2450_radar
|
|
presence_timeout:
|
|
name: "Timeout"
|
|
zone_1:
|
|
x1:
|
|
name: Zone-1 X1
|
|
y1:
|
|
name: Zone-1 Y1
|
|
x2:
|
|
name: Zone-1 X2
|
|
y2:
|
|
name: Zone-1 Y2
|
|
zone_2:
|
|
x1:
|
|
name: Zone-2 X1
|
|
y1:
|
|
name: Zone-2 Y1
|
|
x2:
|
|
name: Zone-2 X2
|
|
y2:
|
|
name: Zone-2 Y2
|
|
zone_3:
|
|
x1:
|
|
name: Zone-3 X1
|
|
y1:
|
|
name: Zone-3 Y1
|
|
x2:
|
|
name: Zone-3 X2
|
|
y2:
|
|
name: Zone-3 Y2
|
|
|
|
select:
|
|
- platform: ld2450
|
|
ld2450_id: ld2450_radar
|
|
baud_rate:
|
|
name: "Baud rate"
|
|
zone_type:
|
|
name: "Zone Type"
|
|
|
|
time:
|
|
- platform: sntp
|
|
id: sntp_time
|
|
# Define the timezone of the device
|
|
timezone: "${timezone}"
|
|
# Change sync interval from default 5min to 6 hours (or as set in substitutions)
|
|
update_interval: ${sntp_update_interval}
|
|
# Set specific sntp servers to use
|
|
servers:
|
|
- "${sntp_server_1}"
|
|
- "${sntp_server_2}"
|
|
- "${sntp_server_3}"
|
|
# Publish the time the device was last restarted
|
|
on_time_sync:
|
|
then:
|
|
# Update last restart time, but only once.
|
|
- if:
|
|
condition:
|
|
lambda: 'return id(device_last_restart).state == "";'
|
|
then:
|
|
- text_sensor.template.publish:
|
|
id: device_last_restart
|
|
state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");' |