Michel2/esp32-configs
1
0
Fork 0
mirror of https://github.com/athom-tech/esp32-configs.git synced 2026-07-27 19:56:13 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
e565e292888ee911cc4811f153c396ba68913d87
esp32-configs/athom-energy-monitor-x6.yaml
T
Aiden 4ccde7c60d Modify version number
2026-07-24 11:22:34 +08:00

625 lines
16 KiB
YAML
Raw Blame History

substitutions:
name: "athom-em-6"
friendly_name: "Athom Energy Meter"
# Allows ESP device to be automatically lined to an 'Area' in Home Assistant. Typically used for areas such as 'Lounge Room', 'Kitchen' etc
room: ""
device_description: "athom bl0906 energy meter (6 channels)"
project_name: "Athom Technology.Athom Energy Meter(6 Channels)"
project_version: "3.0.4"
update_interval: 5s
# Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
dns_domain: ".local"
# Set timezone of the smart plug. Useful if the plug is in a location different to the HA server. Can be entered in unix Country/Area format (i.e. "Australia/Sydney")
timezone: ""
# Set the duration between the sntp service polling ntp.org servers for an update
sntp_update_interval: 6h
# Network time servers for your region, enter from lowest to highest priority. To use local servers update as per zones or countries at: https://www.ntppool.org/zone/@
sntp_server_1: "0.pool.ntp.org"
sntp_server_2: "1.pool.ntp.org"
sntp_server_3: "2.pool.ntp.org"
# Enables faster network connections, with last connected SSID being connected to and no full scan for SSID being undertaken
wifi_fast_connect: "false"
# Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
log_level: "DEBUG"
# Enable or disable the use of IPv6 networking on the device
ipv6_enable: "false"
#############################ESP32C3###########################
bl0906_tx_pin: GPIO7
bl0906_rx_pin: GPIO8
button_pin: GPIO9
led_pin: GPIO10
clk_pin: GPIO2
mosi_pin: GPIO3
backlight_pin: GPIO18
reset_pin: GPIO4
dc_pin: GPIO5
cs_pin: GPIO6
#############################ESP32C3###########################
#############################ESP32-WROOM-32D###########################
# bl0906_tx_pin: GPIO12
# bl0906_rx_pin: GPIO14
# button_pin: GPIO0
# led_pin: GPIO15
# backlight_pin: GPIO33
# clk_pin: GPIO16
# mosi_pin: GPIO17
# reset_pin: GPIO5
# dc_pin: GPIO18
# cs_pin: GPIO19
#############################ESP32-WROOM-32D###########################
esphome:
name: "${name}"
friendly_name: "${friendly_name}"
comment: "${device_description}"
area: "${room}"
name_add_mac_suffix: true
min_version: 2026.6.0
project:
name: "${project_name}"
version: "${project_version}"
esp32:
board: esp32-c3-devkitm-1
flash_size: 4MB
variant: ESP32C3
framework:
type: esp-idf
version: recommended
sdkconfig_options:
# @grigi found in testing that these options resulted in better responsiveness.
# BLE 4.2 is supported by ALL ESP32 boards that have bluetooth, the original and derivatives.
CONFIG_BT_BLE_42_FEATURES_SUPPORTED: y
# Also enable this on any derivative boards (S2, C3 etc) but not the original ESP32.
CONFIG_BT_BLE_50_FEATURES_SUPPORTED: y
# Extend the watchdog timeout, so the device reboots if the device appears locked up for over 10 seconds.
CONFIG_ESP_TASK_WDT_TIMEOUT_S: "10"
# esp32:
# board: esp32dev
# flash_size: 4MB
# variant: ESP32
# framework:
# type: arduino
# version: recommended
preferences:
flash_write_interval: 5min
api:
# reboot_timeout: 0s
# Only enable BLE tracking when wifi is up and api is connected
# Gives single-core ESP32-C3 devices time to manage wifi and authenticate with api
on_client_connected:
- esp32_ble_tracker.start_scan:
continuous: true
# Disable BLE tracking when there are no api connections live
on_client_disconnected:
if:
condition:
not:
api.connected:
then:
- esp32_ble_tracker.stop_scan:
ota:
- platform: esphome
id: ota_esphome
# Enables OTA firmware flashing from a URL (used by the update component below)
- platform: http_request
id: ota_http_request
# Required by the ota http_request platform and the update component.
# verify_ssl: false skips TLS cert validation to reduce heap/RAM pressure during
# the download; the manifest's MD5 still verifies firmware integrity before flashing.
http_request:
id: http_request_component
verify_ssl: false
update:
# Managed updates via HTTP request: periodically checks the published manifest
# and exposes a "Firmware Update" entity, pointing at this device's GitHub Pages
# manifest. Pages URLs avoid the redirect/buffer issues of Release download URLs.
- platform: http_request
id: update_http_request
name: "Firmware Update"
source: https://athom-tech.github.io/esp32-configs/firmware/athom-energy-monitor-x6.manifest.json
# update_interval defaults to 6h (how often it checks, not installs)
logger:
baud_rate: 115200
level: ${log_level}
hardware_uart: UART0
mdns:
disabled: false
web_server:
port: 80
network:
enable_ipv6: ${ipv6_enable}
wifi:
ap: {}
fast_connect: "${wifi_fast_connect}"
domain: "${dns_domain}"
captive_portal:
improv_serial:
esp32_improv:
authorizer: none
esp32_ble_tracker:
scan_parameters:
# Don't auto start BLE scanning, we control it in the `api` block's automation.
continuous: false
active: true # send scan-request packets to gather more info, like device name for some devices.
interval: 320ms # default 320ms - how long to spend on each advert channel
window: 300ms # default 30ms - how long to actually "listen" in each interval. Reduce this if device is unstable.
# If the device cannot keep up or becomes unstable, reduce the "window" setting. This may be
# required if your device is controlling other sensors or doing PWM for lights etc.
bluetooth_proxy:
active: true
dashboard_import:
package_import_url: github://athom-tech/esp32-configs/athom-energy-monitor-x6.yaml
globals:
- id: id_Energy_sum_persist
type: float
restore_value: yes
initial_value: '0.0'
- id: id_Energy_sum_lastvalue
type: float
restore_value: no
initial_value: '0.0'
- id: id_Energy_1_persist
type: float
restore_value: yes
initial_value: '0.0'
- id: id_Energy_1_lastvalue
type: float
restore_value: no
initial_value: '0.0'
- id: id_Energy_2_persist
type: float
restore_value: yes
initial_value: '0.0'
- id: id_Energy_2_lastvalue
type: float
restore_value: no
initial_value: '0.0'
- id: id_Energy_3_persist
type: float
restore_value: yes
initial_value: '0.0'
- id: id_Energy_3_lastvalue
type: float
restore_value: no
initial_value: '0.0'
- id: id_Energy_4_persist
type: float
restore_value: yes
initial_value: '0.0'
- id: id_Energy_4_lastvalue
type: float
restore_value: no
initial_value: '0.0'
- id: id_Energy_5_persist
type: float
restore_value: yes
initial_value: '0.0'
- id: id_Energy_5_lastvalue
type: float
restore_value: no
initial_value: '0.0'
- id: id_Energy_6_persist
type: float
restore_value: yes
initial_value: '0.0'
- id: id_Energy_6_lastvalue
type: float
restore_value: no
initial_value: '0.0'
uart:
tx_pin: "$bl0906_tx_pin"
rx_pin: "$bl0906_rx_pin"
baud_rate: 19200
id: uart_bl0906
light:
- platform: status_led
name: "Status LED"
id: blue_led
disabled_by_default: true
pin: $led_pin
binary_sensor:
- platform: status
name: "Status"
entity_category: diagnostic
- platform: gpio
pin:
number: "$button_pin"
mode: INPUT_PULLUP
inverted: true
name: "Power Button"
disabled_by_default: true
on_multi_click:
- timing:
- ON for at least 4s
then:
- button.press: Reset
sensor:
- platform: uptime
name: "Uptime Sensor"
id: uptime_sensor
type:
timestamp
entity_category: "diagnostic"
- platform: wifi_signal
name: "WiFi Signal dB"
id: wifi_signal_db
update_interval: 60s
entity_category: "diagnostic"
- platform: copy
source_id: wifi_signal_db
name: "WiFi Signal Percent"
filters:
- lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
unit_of_measurement: "Signal %"
entity_category: "diagnostic"
device_class: ""
- platform: bl0906
id: id_bl0906
update_interval: "${update_interval}"
frequency:
name: 'Frequency'
id: 'Frequency'
temperature:
name: 'Temperature'
id: 'Temperature'
voltage:
name: 'Voltage'
id: 'Voltage'
channel_1:
current:
name: 'Current_1'
id: 'Current_1'
power:
name: 'Power_1'
id: 'Power_1'
energy:
id: 'Energy_1'
name: 'Energy_1_Internal'
internal: true
channel_2:
current:
name: 'Current_2'
id: 'Current_2'
power:
name: 'Power_2'
id: 'Power_2'
energy:
id: 'Energy_2'
name: 'Energy_2_Internal'
internal: true
channel_3:
current:
name: 'Current_3'
id: 'Current_3'
power:
name: 'Power_3'
id: 'Power_3'
energy:
id: 'Energy_3'
name: 'Energy_3_Internal'
internal: true
channel_4:
current:
name: 'Current_4'
id: 'Current_4'
power:
name: 'Power_4'
id: 'Power_4'
energy:
id: 'Energy_4'
name: 'Energy_4_Internal'
internal: true
channel_5:
current:
name: 'Current_5'
id: 'Current_5'
power:
name: 'Power_5'
id: 'Power_5'
energy:
id: 'Energy_5'
name: 'Energy_5_Internal'
internal: true
channel_6:
current:
name: 'Current_6'
id: 'Current_6'
power:
name: 'Power_6'
id: 'Power_6'
energy:
id: 'Energy_6'
name: 'Energy_6_Internal'
internal: true
total_energy:
name: 'Total_Energy'
id: 'Energy_sum'
internal: true
total_power:
name: 'Total_Power'
id: 'Total_Power'
- platform: copy
name: 'Total_Energy'
id: Energy_sum_persist
source_id: Energy_sum
state_class: total_increasing
filters:
- lambda: |-
if(id(id_Energy_sum_lastvalue) == 0.0 )
{
id(id_Energy_sum_lastvalue) = id(Energy_sum).state;
}
if(x < id(id_Energy_sum_persist))
{
float delta = x - id(id_Energy_sum_lastvalue);
id(id_Energy_sum_persist) += delta;
id(id_Energy_sum_lastvalue) = x;
}
else
{
id(id_Energy_sum_persist) = x;
}
return id(id_Energy_sum_persist);
- platform: copy
name: 'Energy_1'
id: Energy_1_persist
source_id: Energy_1
state_class: total_increasing
filters:
- lambda: |-
if(id(id_Energy_1_lastvalue) == 0.0 )
{
id(id_Energy_1_lastvalue) = id(Energy_1).state;
}
if(x < id(id_Energy_1_persist))
{
float delta = x - id(id_Energy_1_lastvalue);
id(id_Energy_1_persist) += delta;
id(id_Energy_1_lastvalue) = x;
}
else
{
id(id_Energy_1_persist) = x;
}
return id(id_Energy_1_persist);
- platform: copy
name: 'Energy_2'
id: Energy_2_persist
source_id: Energy_2
state_class: total_increasing
filters:
- lambda: |-
if(id(id_Energy_2_lastvalue) == 0.0 )
{
id(id_Energy_2_lastvalue) = id(Energy_2).state;
}
if(x < id(id_Energy_2_persist))
{
float delta = x - id(id_Energy_2_lastvalue);
id(id_Energy_2_persist) += delta;
id(id_Energy_2_lastvalue) = x;
}
else
{
id(id_Energy_2_persist) = x;
}
return id(id_Energy_2_persist);
- platform: copy
name: 'Energy_3'
id: Energy_3_persist
source_id: Energy_3
state_class: total_increasing
filters:
- lambda: |-
if(id(id_Energy_3_lastvalue) == 0.0 )
{
id(id_Energy_3_lastvalue) = id(Energy_3).state;
}
if(x < id(id_Energy_3_persist))
{
float delta = x - id(id_Energy_3_lastvalue);
id(id_Energy_3_persist) += delta;
id(id_Energy_3_lastvalue) = x;
}
else
{
id(id_Energy_3_persist) = x;
}
return id(id_Energy_3_persist);
- platform: copy
name: 'Energy_4'
id: Energy_4_persist
source_id: Energy_4
state_class: total_increasing
filters:
- lambda: |-
if(id(id_Energy_4_lastvalue) == 0.0 )
{
id(id_Energy_4_lastvalue) = id(Energy_4).state;
}
if(x < id(id_Energy_4_persist))
{
float delta = x - id(id_Energy_4_lastvalue);
id(id_Energy_4_persist) += delta;
id(id_Energy_4_lastvalue) = x;
}
else
{
id(id_Energy_4_persist) = x;
}
return id(id_Energy_4_persist);
- platform: copy
name: 'Energy_5'
id: Energy_5_persist
source_id: Energy_5
state_class: total_increasing
filters:
- lambda: |-
if(id(id_Energy_5_lastvalue) == 0.0 )
{
id(id_Energy_5_lastvalue) = id(Energy_5).state;
}
if(x < id(id_Energy_5_persist))
{
float delta = x - id(id_Energy_5_lastvalue);
id(id_Energy_5_persist) += delta;
id(id_Energy_5_lastvalue) = x;
}
else
{
id(id_Energy_5_persist) = x;
}
return id(id_Energy_5_persist);
- platform: copy
name: 'Energy_6'
id: Energy_6_persist
source_id: Energy_6
state_class: total_increasing
filters:
- lambda: |-
if(id(id_Energy_6_lastvalue) == 0.0 )
{
id(id_Energy_6_lastvalue) = id(Energy_6).state;
}
if(x < id(id_Energy_6_persist))
{
float delta = x - id(id_Energy_6_lastvalue);
id(id_Energy_6_persist) += delta;
id(id_Energy_6_lastvalue) = x;
}
else
{
id(id_Energy_6_persist) = x;
}
return id(id_Energy_6_persist);
button:
- platform: restart
name: "Restart"
entity_category: config
- platform: factory_reset
name: "Factory Reset"
id: Reset
entity_category: config
- platform: safe_mode
name: "Safe Mode"
internal: false
entity_category: config
- platform: template
name: Reset Energy
entity_category: config
on_press:
then:
- globals.set:
id: id_Energy_1_persist
value: '0.0'
- globals.set:
id: id_Energy_2_persist
value: '0.0'
- globals.set:
id: id_Energy_3_persist
value: '0.0'
- globals.set:
id: id_Energy_4_persist
value: '0.0'
- globals.set:
id: id_Energy_5_persist
value: '0.0'
- globals.set:
id: id_Energy_6_persist
value: '0.0'
- globals.set:
id: id_Energy_sum_persist
value: '0.0'
- bl0906.reset_energy: id_bl0906
text_sensor:
- platform: wifi_info
ip_address:
name: "IP Address"
id: ip_address
entity_category: diagnostic
ssid:
name: "Connected SSID"
id: ssid
entity_category: diagnostic
mac_address:
name: "Mac Address"
id: mac_address
entity_category: diagnostic
- platform: template
name: "Last Restart"
id: device_last_restart
icon: mdi:clock
entity_category: diagnostic
device_class: timestamp
time:
- platform: sntp
id: sntp_time
# Define the timezone of the device
timezone: "${timezone}"
# Change sync interval from default 5min to 6 hours (or as set in substitutions)
update_interval: ${sntp_update_interval}
# Set specific sntp servers to use
servers:
- "${sntp_server_1}"
- "${sntp_server_2}"
- "${sntp_server_3}"
# Publish the time the device was last restarted
on_time_sync:
then:
# Update last restart time, but only once.
- if:
condition:
lambda: 'return id(device_last_restart).state == "";'
then:
- text_sensor.template.publish:
id: device_last_restart
state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'
Reference in New Issue View Git Blame Copy Permalink