PEAP_password now 63 chars

firmware/sha1sums

@@ -1,3 +1,3 @@
-16a684d2010ba4e1f455c0c447eb49fe04842f58  firmware/0x02000.bin
+d324a9a4a90fa827f6ef7c568ee36f15dd6f462c  firmware/0x02000.bin
-9869f9b53d93b2ee6c272e35fcba314e2357a327  firmware/0x82000.bin
+bb6317dc3644c01984015b2f4b6772882f5045e1  firmware/0x82000.bin
 9bd7d25204d71b3db5f35e0b2def8a6aaa7f765c  firmware/0x00000.bin

user/config_flash.c

@@ -190,12 +190,13 @@ int ICACHE_FLASH_ATTR config_load(sysconfig_p config)
         config_save(config);
         return -1;
     }
-
-    os_printf("\r\nConfig found and loaded\r\n");
     spi_flash_read(base_address * SPI_FLASH_SEC_SIZE, (uint32 *) config, sizeof(sysconfig_t));
+
+    os_printf("\r\nConfig found and loaded (%d Bytes)\r\n", config->length);
+
     if (config->length != sizeof(sysconfig_t))
     {
-        os_printf("Length Mismatch, probably old version of config, loading defaults\r\n");
+        os_printf("Length Mismatch (should be %d), probably old version of config, loading defaults\r\n", sizeof(sysconfig_t));
         config_load_default(config);
         config_save(config);
 	return -1;
@@ -309,3 +310,81 @@ void user_rf_pre_init() {
     }*/
   }
 }
+/*
+// user_pre_init is required from SDK v3.0.0 onwards
+// It is used to register the parition map with the SDK, primarily to allow
+// the app to use the SDK's OTA capability.  We don't make use of that in 
+// otb-iot and therefore the only info we provide is the mandatory stuff:
+// - RF calibration data
+// - Physical data
+// - System parameter
+// The location and length of these are from the 2A SDK getting started guide
+void ICACHE_FLASH_ATTR user_pre_init(void)
+{
+  bool rc = false;
+  static const partition_item_t part_table[] = 
+  {
+    {SYSTEM_PARTITION_RF_CAL,
+     0x3fb000,
+     0x1000},
+    {SYSTEM_PARTITION_PHY_DATA,
+     0x3fc000,
+     0x1000},
+    {SYSTEM_PARTITION_SYSTEM_PARAMETER,
+     0x3fd000,
+     0x3000},
+  };
+/*
+  enum flash_size_map size_map = system_get_flash_size_map();
+  uint32 rf_cal_sec = 0, addr, i;
+  //os_printf("\nUser preinit: ");
+   switch (size_map) {
+      case FLASH_SIZE_4M_MAP_256_256:
+         rf_cal_sec = 128 - 5;
+         break;
+
+      case FLASH_SIZE_8M_MAP_512_512:
+         rf_cal_sec = 256 - 5;
+         break;
+
+      case FLASH_SIZE_16M_MAP_512_512:
+      case FLASH_SIZE_16M_MAP_1024_1024:
+         rf_cal_sec = 512 - 5;
+         break;
+
+      case FLASH_SIZE_32M_MAP_512_512:
+      case FLASH_SIZE_32M_MAP_1024_1024:
+         rf_cal_sec = 1024 - 5;
+         break;
+
+      default:
+         rf_cal_sec = 0;
+         break;
+   }
+
+    static const partition_item_t part_table[] = 
+    {
+        {SYSTEM_PARTITION_RF_CAL,
+        rf_cal_sec * 0x1000,
+        0x1000},
+        {SYSTEM_PARTITION_PHY_DATA,
+        (rf_cal_sec + 1) * 0x1000,
+        0x1000},
+        {SYSTEM_PARTITION_SYSTEM_PARAMETER,
+        (rf_cal_sec + 2) * 0x1000,
+        0x3000},
+    };
+
+  // This isn't an ideal approach but there's not much point moving on unless
+  // or until this has succeeded cos otherwise the SDK will just barf and 
+  // refuse to call user_init()
+  while (!rc)
+  {
+    rc = system_partition_table_regist(part_table,
+				       sizeof(part_table)/sizeof(part_table[0]),
+                                       4);
+  }
+
+  return;
+}
+*/

user/config_flash.h

@@ -14,9 +14,9 @@
 #include "user_config.h"
 #include "acl.h"
 
-#define FLASH_BLOCK_NO 0x61
+#define FLASH_BLOCK_NO 0x68
 
-#define MAGIC_NUMBER    0x6e2f5510
+#define MAGIC_NUMBER    0x6e2dc510
 
 typedef enum {
         AUTOMESH_OFF = 0, AUTOMESH_LEARNING, AUTOMESH_OPERATIONAL
@@ -56,7 +56,7 @@ typedef struct {
         uint8_t use_PEAP; // WPA2 PEAP Authentication
         uint8_t PEAP_identity[64]; // PEAP enterprise outer identity
         uint8_t PEAP_username[64]; // PEAP enterprise username
-        uint8_t PEAP_password[32]; // PEAP enterprise password
+        uint8_t PEAP_password[64]; // PEAP enterprise password
 #endif
         uint8_t lock_password[64]; // Password of config lock
         uint8_t locked; // Should we allow for config changes

user/user_config.h

@@ -1,7 +1,7 @@
 #ifndef _USER_CONFIG_
 #define _USER_CONFIG_
 
-#define		ESP_REPEATER_VERSION "V2.2.13"
+#define		ESP_REPEATER_VERSION "V2.2.14"
 
 #define		LOCAL_ACCESS 0x01
 #define		REMOTE_ACCESS 0x02

user/user_main.c

@@ -2523,7 +2523,7 @@ void ICACHE_FLASH_ATTR console_handle_command(struct espconn *pespconn)
 
             if (strcmp(tokens[1], "peap_identity") == 0)
             {
-                if (os_strlen(tokens[2]) > sizeof(config.PEAP_password) - 1)
+                if (os_strlen(tokens[2]) > sizeof(config.PEAP_identity) - 1)
                 {
                     os_sprintf(response, "Identity too long (max. %d)\r\n", sizeof(config.PEAP_identity) - 1);
                 }
@@ -2537,7 +2537,7 @@ void ICACHE_FLASH_ATTR console_handle_command(struct espconn *pespconn)
 
             if (strcmp(tokens[1], "peap_username") == 0)
             {
-                if (os_strlen(tokens[2]) > sizeof(config.PEAP_password) - 1)
+                if (os_strlen(tokens[2]) > sizeof(config.PEAP_username) - 1)
                 {
                     os_sprintf(response, "Username too long (max. %d)\r\n", sizeof(config.PEAP_username) - 1);
                 }