From 220ad471b8fb88996bb589dc20c5e9cd3c62f42f Mon Sep 17 00:00:00 2001
From: Laurens Valk <laurens@pybricks.com>
Date: Mon, 13 Jan 2020 13:30:08 +0100
Subject: [PATCH] api/ev3devices: remove duplicate AnalogSensor

This has previously been moved to the iodevices class
---
 pybricks/ev3devices.py | 60 ------------------------------------------
 1 file changed, 60 deletions(-)

diff --git a/pybricks/ev3devices.py b/pybricks/ev3devices.py
index 99d20c2..ac0bffe 100644
--- a/pybricks/ev3devices.py
+++ b/pybricks/ev3devices.py
@@ -292,63 +292,3 @@ class UltrasonicSensor():
             ``False`` if not.
         """
         pass
-
-
-class AnalogSensor():
-    """Generic or custom analog sensor."""
-
-    def __init__(self, port, check_type=True):
-        """
-
-        Arguments:
-            port (Port): Port to which the sensor is connected.
-            verify_type(bool): Verify that the sensor is detected as an analog
-                sensor (*Default*: ``True``).
-
-                If you choose ``verify_type=False``, the EV3 will treat it as
-                an analog sensor even if no such sensor is detected. This is
-                useful if you have a (custom) analog sensor that is not
-                detected automatically.
-        """
-        pass
-
-    def voltage(self):
-        """Measured analog voltage.
-
-        Returns:
-            :ref:`voltage`: Analog voltage.
-        """
-        pass
-
-    def resistance(self):
-        """Measured resistance.
-
-        This value is only meaningful if the analog device is a passive load
-        such as a resistor or thermistor.
-
-        Returns:
-            :ref:`resistance: Ω <voltage>`: Resistance of the analog device.
-        """
-        pass
-
-    def active(self):
-        """Set sensor to active mode. This sets pin 5 of the sensor
-        port to `high`.
-
-        This is used in some analog
-        sensors to control a switch. For example, if you use the NXT Light
-        Sensor as a custom analog sensor, this method will turn the light on.
-        From then on, ``voltage()`` returns the raw reflected light value.
-        """
-        pass
-
-    def passive(self):
-        """Set sensor to passive mode. This sets pin 5 of the sensor
-        port to `low`.
-
-        This is used in some analog
-        sensors to control a switch. For example, if you use the NXT Light
-        Sensor as a custom analog sensor, this method will turn the light off.
-        From then on, ``voltage()`` returns the raw ambient light value.
-        """
-        pass