diff --git a/source/images/overview.png b/source/images/overview.png
new file mode 100644
index 0000000..bb28118
Binary files /dev/null and b/source/images/overview.png differ
diff --git a/source/images/vsix.png b/source/images/vsix.png
new file mode 100644
index 0000000..9ebbbb7
Binary files /dev/null and b/source/images/vsix.png differ
diff --git a/source/startinstall.rst b/source/startinstall.rst
index 5f37467..a4b929e 100644
--- a/source/startinstall.rst
+++ b/source/startinstall.rst
@@ -1,56 +1,67 @@
+.. warning::
+
+    None
+        - ***
+        - ***
+
 Installation
 ===================
 
-.. note::
-    
 
-    
 
-Overview
------------------------------------------------------------
 
-.. todo::
-    Generic overview
+
+This page shows how you prepare your computer and the EV3 brick for writing and running Python programs. The final configuration is shown in the figure below.
+
+
+.. image:: images/overview.png
 
 What do you need?
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-
-.. todo::
-
-    - A micro SD card and card reader
-
-        - Specs
-    - Windows 10 or Mac OS computer
-    - Mini-USB cable
-
-What is the SD card for?
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Installing Python for EV3
 -----------------------------------------------------------
 
+To get started writing Python programs for your robot, you need the following items:
+
+- a Windows 10 or Mac OS computer
+- a micro SD card and card reader
+- a mini-USB cable (comes with the EV3 kit)
+
+You'll need internet access to complete the steps on this page. While programming your robots afterwards, internet access is not required.
+
+
 Preparing your computer
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+-----------------------------------------------------------
 
-.. todo::
+.. note::
 
-    - A micro SD card and card reader
+    
 
-        - Specs
-    - Windows 10 or Mac OS computer
-    - Mini-USB cable
+You will be writing your Python programs using Visual Studio Code. You can download, install, and configure this program using the steps below.
+
+1. Download, install, and open `Visual Studio Code  <https://code.visualstudio.com/Download>`_.
+2. Download the `Pybricks extension <vscode-pybricks-ev3dev/build15/pybricks-ev3dev-0.0.1.vsix>`_. Follow the steps in the diagram below to install it.
+3. Download the `EV3 Python extension </build3/ev3-python-0.0.1.vsix>`_. Follow the steps in the diagram below to install it.
+4. Close Visual Studio Code and open it again to activate the extensions.
+
+.. image:: images/vsix.png
 
 Preparing the SD Card
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+-----------------------------------------------------------
+
+You will now follow a series of steps to download and install the EV3 Python firmware onto your micro SD card.
+
+
+1. Download the `EV3 Python firmware <stretch-build6.zip>`_ and save it in a convenient location.
+2. Download and install `Etcher <https://www.balena.io/etcher/>`_. This is the program for installing the firmware file on your micro SD card.
+3. Insert the micro SD card into your computer or card reader.
+4. Launch the etcher program and follow the steps on your screen to install the firmware you have just downloaded. Do not remove the card until the installation process is complete.
+5. Put the micro SD card in the SD card slot of the EV3 brick. 
+
 
 .. todo::
 
-    - A micro SD card and card reader
-
-        - Specs
-    - Windows 10 or Mac OS computer
-    - Mini-USB cable
+    - images of the etcher process
+    - image of inserting an SD card into the brick
+    - write the following sections
 
 
 Using the EV3 brick