mirror of
https://github.com/pybricks/pybricks-api.git
synced 2026-09-12 01:24:17 +00:00
121 lines
4.0 KiB
Python
121 lines
4.0 KiB
Python
"""Robotics module for the Pybricks API."""
|
|
|
|
from .parameters import Stop
|
|
from .builtins import Control
|
|
|
|
|
|
class DriveBase():
|
|
"""A robotic vehicle with two powered wheels and an optional support
|
|
wheel or caster."""
|
|
|
|
distance_control = Control()
|
|
"""PID control is used to track the desired speed and travel the control
|
|
required distance You can change the behavior through this attribute.
|
|
See :ref:`control` for an overview of available methods."""
|
|
|
|
heading_control = Control()
|
|
"""PID control is used to synchronize the wheel speed,
|
|
track the turn rate, and reach the turn angle. You can change the control
|
|
behavior through this attribute. See :ref:`control` for an overview of
|
|
available methods."""
|
|
|
|
def __init__(self, left_motor, right_motor, wheel_diameter, axle_track):
|
|
"""DriveBase(left_motor, right_motor, wheel_diameter, axle_track)
|
|
|
|
Arguments:
|
|
left_motor (Motor):
|
|
The motor that drives the left wheel.
|
|
right_motor (Motor):
|
|
The motor that drives the right wheel.
|
|
wheel_diameter (:ref:`dimension`): Diameter of the wheels.
|
|
axle_track (:ref:`dimension`): Distance between the midpoints of
|
|
the two wheels.
|
|
"""
|
|
|
|
def drive(self, drive_speed, turn_rate):
|
|
"""Start driving at the specified speed and turn rate. Both values are
|
|
measured at the center point between the wheels of the robot.
|
|
|
|
Arguments:
|
|
drive_speed (:ref:`linspeed`): Speed of the robot. Positive is forward,
|
|
negative is backward.
|
|
turn_rate (:ref:`speed`): Turn rate of the robot. Positive is to the
|
|
right, negative is to the left.
|
|
"""
|
|
pass
|
|
|
|
def stop(self, stop_type=Stop.COAST):
|
|
"""Stop the robot.
|
|
|
|
Arguments:
|
|
stop_type (Stop): Whether to coast, brake, or hold (*Default*:
|
|
:class:`Stop.COAST <.parameters.Stop>`).
|
|
"""
|
|
pass
|
|
|
|
def distance(self):
|
|
"""Get the estimated driven distance.
|
|
|
|
Returns:
|
|
:ref:`distance`: Driven distance since last reset.
|
|
"""
|
|
pass
|
|
|
|
def angle(self):
|
|
"""Get the estimated rotation angle of the drive base.
|
|
|
|
Returns:
|
|
:ref:`angle`: Accumulated angle since last reset.
|
|
"""
|
|
pass
|
|
|
|
def state(self):
|
|
"""Get the instantaneous physical state.
|
|
|
|
This returns the current :meth:`.distance`, the drive speed, the
|
|
:meth:`.angle`, and the turn rate.
|
|
|
|
:returns: Distance, drive speed, angle, turn rate
|
|
:rtype: (:ref:`distance`, :ref:`linspeed`, :ref:`angle`, :ref:`speed`)
|
|
"""
|
|
pass
|
|
|
|
def reset(self):
|
|
"""Reset the estimated driven distance and angle to 0."""
|
|
pass
|
|
|
|
def settings(self, drive_speed, drive_acceleration, turn_rate,
|
|
turn_acceleration, stop_type):
|
|
"""Configure the acceleration and maximum speed used
|
|
by :meth:`.straight`, :meth:`.turn`, and :meth:`.drive`.
|
|
|
|
If you give no arguments, this returns the current values as a tuple.
|
|
|
|
Arguments:
|
|
drive_speed (:ref:`linspeed`): Drive speed of the robot.
|
|
drive_acceleration (:ref:`linacceleration`): Linear acceleration
|
|
of the robot.
|
|
turn_rate (:ref:`speed`): Turn rate of the robot.
|
|
turn_acceleration (:ref:`acceleration`): Angular acceleration of
|
|
the robot.
|
|
stop_type (Stop): Whether to coast, brake, or hold after
|
|
a given command is complete.
|
|
"""
|
|
pass
|
|
|
|
def straight(self, distance):
|
|
"""Drive straight for a given distance and then stop.
|
|
|
|
Arguments:
|
|
distance (:ref:`distance`): Distance to travel.
|
|
"""
|
|
pass
|
|
|
|
def turn(self, angle):
|
|
"""Turn in place by a given angle and then stop.
|
|
|
|
Arguments:
|
|
angle (:ref:`angle`): Angle of the turn.
|
|
"""
|
|
pass
|