diff --git a/cppsrc/U8g2lib.h b/cppsrc/U8g2lib.h
index a8d33a04..002936fa 100644
--- a/cppsrc/U8g2lib.h
+++ b/cppsrc/U8g2lib.h
@@ -16013,6 +16013,132 @@ class U8G2_UC1698_160X160_F_8080 : public U8G2 {
     u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
   }
 };
+class U8G2_UC1698_240X64_1_4W_SW_SPI : public U8G2 {
+  public: U8G2_UC1698_240X64_1_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_1(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
+  }
+};
+class U8G2_UC1698_240X64_1_4W_HW_SPI : public U8G2 {
+  public: U8G2_UC1698_240X64_1_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_1(&u8g2, rotation, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8G2_UC1698_240X64_1_2ND_4W_HW_SPI : public U8G2 {
+  public: U8G2_UC1698_240X64_1_2ND_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_1(&u8g2, rotation, u8x8_byte_arduino_2nd_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8G2_UC1698_240X64_1_3W_SW_SPI : public U8G2 {
+  public: U8G2_UC1698_240X64_1_3W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_1(&u8g2, rotation, u8x8_byte_arduino_3wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_3Wire_SW_SPI(getU8x8(), clock, data, cs, reset);
+  }
+};
+class U8G2_UC1698_240X64_1_3W_HW_SPI : public U8G2 {
+  public: U8G2_UC1698_240X64_1_3W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_1(&u8g2, rotation, u8x8_byte_arduino_3wire_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_3Wire_HW_SPI(getU8x8(), cs, reset);
+  }
+};
+class U8G2_UC1698_240X64_1_6800 : public U8G2 {
+  public: U8G2_UC1698_240X64_1_6800(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_1(&u8g2, rotation, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_UC1698_240X64_1_8080 : public U8G2 {
+  public: U8G2_UC1698_240X64_1_8080(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_1(&u8g2, rotation, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_UC1698_240X64_2_4W_SW_SPI : public U8G2 {
+  public: U8G2_UC1698_240X64_2_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_2(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
+  }
+};
+class U8G2_UC1698_240X64_2_4W_HW_SPI : public U8G2 {
+  public: U8G2_UC1698_240X64_2_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_2(&u8g2, rotation, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8G2_UC1698_240X64_2_2ND_4W_HW_SPI : public U8G2 {
+  public: U8G2_UC1698_240X64_2_2ND_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_2(&u8g2, rotation, u8x8_byte_arduino_2nd_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8G2_UC1698_240X64_2_3W_SW_SPI : public U8G2 {
+  public: U8G2_UC1698_240X64_2_3W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_2(&u8g2, rotation, u8x8_byte_arduino_3wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_3Wire_SW_SPI(getU8x8(), clock, data, cs, reset);
+  }
+};
+class U8G2_UC1698_240X64_2_3W_HW_SPI : public U8G2 {
+  public: U8G2_UC1698_240X64_2_3W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_2(&u8g2, rotation, u8x8_byte_arduino_3wire_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_3Wire_HW_SPI(getU8x8(), cs, reset);
+  }
+};
+class U8G2_UC1698_240X64_2_6800 : public U8G2 {
+  public: U8G2_UC1698_240X64_2_6800(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_2(&u8g2, rotation, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_UC1698_240X64_2_8080 : public U8G2 {
+  public: U8G2_UC1698_240X64_2_8080(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_2(&u8g2, rotation, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_UC1698_240X64_F_4W_SW_SPI : public U8G2 {
+  public: U8G2_UC1698_240X64_F_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_f(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
+  }
+};
+class U8G2_UC1698_240X64_F_4W_HW_SPI : public U8G2 {
+  public: U8G2_UC1698_240X64_F_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_f(&u8g2, rotation, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8G2_UC1698_240X64_F_2ND_4W_HW_SPI : public U8G2 {
+  public: U8G2_UC1698_240X64_F_2ND_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_f(&u8g2, rotation, u8x8_byte_arduino_2nd_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8G2_UC1698_240X64_F_3W_SW_SPI : public U8G2 {
+  public: U8G2_UC1698_240X64_F_3W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_f(&u8g2, rotation, u8x8_byte_arduino_3wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_3Wire_SW_SPI(getU8x8(), clock, data, cs, reset);
+  }
+};
+class U8G2_UC1698_240X64_F_3W_HW_SPI : public U8G2 {
+  public: U8G2_UC1698_240X64_F_3W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_f(&u8g2, rotation, u8x8_byte_arduino_3wire_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_3Wire_HW_SPI(getU8x8(), cs, reset);
+  }
+};
+class U8G2_UC1698_240X64_F_6800 : public U8G2 {
+  public: U8G2_UC1698_240X64_F_6800(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_f(&u8g2, rotation, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8G2_UC1698_240X64_F_8080 : public U8G2 {
+  public: U8G2_UC1698_240X64_F_8080(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
+    u8g2_Setup_uc1698_240x64_f(&u8g2, rotation, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
 class U8G2_ST7511_AVD_320X240_1_4W_SW_SPI : public U8G2 {
   public: U8G2_ST7511_AVD_320X240_1_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
     u8g2_Setup_st7511_avd_320x240_1(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
diff --git a/cppsrc/U8x8lib.h b/cppsrc/U8x8lib.h
index dbb8216b..0a799165 100644
--- a/cppsrc/U8x8lib.h
+++ b/cppsrc/U8x8lib.h
@@ -5607,6 +5607,48 @@ class U8X8_UC1698_160X160_8080 : public U8X8 {
     u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
   }
 };
+class U8X8_UC1698_240X64_4W_SW_SPI : public U8X8 {
+  public: U8X8_UC1698_240X64_4W_SW_SPI(uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_uc1698_240x64, u8x8_cad_001, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
+  }
+};
+class U8X8_UC1698_240X64_4W_HW_SPI : public U8X8 {
+  public: U8X8_UC1698_240X64_4W_HW_SPI(uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_uc1698_240x64, u8x8_cad_001, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8X8_UC1698_240X64_2ND_4W_HW_SPI : public U8X8 {
+  public: U8X8_UC1698_240X64_2ND_4W_HW_SPI(uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_uc1698_240x64, u8x8_cad_001, u8x8_byte_arduino_2nd_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
+  }
+};
+class U8X8_UC1698_240X64_3W_SW_SPI : public U8X8 {
+  public: U8X8_UC1698_240X64_3W_SW_SPI(uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_uc1698_240x64, u8x8_cad_001, u8x8_byte_arduino_3wire_sw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_3Wire_SW_SPI(getU8x8(), clock, data, cs, reset);
+  }
+};
+class U8X8_UC1698_240X64_3W_HW_SPI : public U8X8 {
+  public: U8X8_UC1698_240X64_3W_HW_SPI(uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_uc1698_240x64, u8x8_cad_001, u8x8_byte_arduino_3wire_hw_spi, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_3Wire_HW_SPI(getU8x8(), cs, reset);
+  }
+};
+class U8X8_UC1698_240X64_6800 : public U8X8 {
+  public: U8X8_UC1698_240X64_6800(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_uc1698_240x64, u8x8_cad_001, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
+class U8X8_UC1698_240X64_8080 : public U8X8 {
+  public: U8X8_UC1698_240X64_8080(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_uc1698_240x64, u8x8_cad_001, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
+  }
+};
 class U8X8_ST7511_AVD_320X240_4W_SW_SPI : public U8X8 {
   public: U8X8_ST7511_AVD_320X240_4W_SW_SPI(uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
     u8x8_Setup(getU8x8(), u8x8_d_st7511_avd_320x240, u8x8_cad_011, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
diff --git a/csrc/u8g2.h b/csrc/u8g2.h
index 79156def..e387dd79 100644
--- a/csrc/u8g2.h
+++ b/csrc/u8g2.h
@@ -1274,6 +1274,9 @@ void u8g2_Setup_uc1611_i2c_ids4073_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8
 void u8g2_Setup_uc1698_160x160_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_uc1698_160x160_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_uc1698_160x160_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_uc1698_240x64_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_uc1698_240x64_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_uc1698_240x64_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_st7511_avd_320x240_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_st7511_avd_320x240_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_st7511_avd_320x240_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
diff --git a/csrc/u8g2_d_setup.c b/csrc/u8g2_d_setup.c
index 66b01774..bb06646a 100644
--- a/csrc/u8g2_d_setup.c
+++ b/csrc/u8g2_d_setup.c
@@ -5215,6 +5215,34 @@ void u8g2_Setup_uc1698_160x160_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_m
   buf = u8g2_m_20_20_f(&tile_buf_height);
   u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_horizontal_right_lsb, rotation);
 }
+/* uc1698 */
+/* uc1698 1 */
+void u8g2_Setup_uc1698_240x64_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_uc1698_240x64, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_30_8_1(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_horizontal_right_lsb, rotation);
+}
+/* uc1698 2 */
+void u8g2_Setup_uc1698_240x64_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_uc1698_240x64, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_30_8_2(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_horizontal_right_lsb, rotation);
+}
+/* uc1698 f */
+void u8g2_Setup_uc1698_240x64_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_uc1698_240x64, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_30_8_f(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_horizontal_right_lsb, rotation);
+}
 /* st7511 */
 /* st7511 1 */
 void u8g2_Setup_st7511_avd_320x240_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
diff --git a/csrc/u8x8.h b/csrc/u8x8.h
index 29870e96..8a3a5889 100644
--- a/csrc/u8x8.h
+++ b/csrc/u8x8.h
@@ -1032,6 +1032,7 @@ uint8_t u8x8_d_uc1638_160x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *
 uint8_t u8x8_d_uc1638_192x96(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_uc1638_240x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_uc1698_160x160(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
+uint8_t u8x8_d_uc1698_240x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_ks0108_128x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_ks0108_erm19264(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_t7932_150x32(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr); /* t7932 and hd44102 are compatible */
diff --git a/csrc/u8x8_d_uc1698.c b/csrc/u8x8_d_uc1698.c
index bed0f61a..a7375c2b 100644
--- a/csrc/u8x8_d_uc1698.c
+++ b/csrc/u8x8_d_uc1698.c
@@ -109,6 +109,7 @@ uint8_t u8x8_d_uc1698u_common(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *
       u8x8_cad_SendCmd(u8x8,x);
       
       y = ((u8x8_tile_t *)arg_ptr)->y_pos;
+      y+=40;
       y = y<<3;
       u8x8_cad_SendCmd(u8x8,0xF5); //start y
       u8x8_cad_SendCmd(u8x8,y);
@@ -356,4 +357,258 @@ uint8_t u8x8_d_uc1698_160x160(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *
     }
   }
   return 1;
-}
\ No newline at end of file
+}
+
+/*=====================================================*/
+/* 240x64 display 
+
+  Notes:
+    The above 160x160 had been a great inital code template for the below 240x64 display,
+    however i did several improvements
+    - The window size is now maximized to avoid any line breaks by the display
+    - The row/col position is set for each horizontal row
+    - I think the below common2 is more portable and could be reused.
+    - If the y-offset differs, it could be passed/changed via function arguments
+*/
+
+
+
+uint8_t u8x8_d_uc1698u_common2(u8x8_t *u8x8, uint8_t y_offset, uint8_t msg, uint8_t arg_int, void *arg_ptr)
+{
+  uint8_t x, y, c, r;
+  uint8_t *ptr;
+  uint8_t arr_4k[4];
+  
+  switch(msg)
+  {
+    case U8X8_MSG_DISPLAY_DRAW_TILE:
+      u8x8_cad_StartTransfer(u8x8);
+    
+      x = ((u8x8_tile_t *)arg_ptr)->x_pos;
+      // in u8g2 horizontal mode, x is always 0
+      //x = x<<3;         // Fast multiplication by 8 with shift
+      //x /= 3;           //The X-axis is addressed using 1 RAM cell. 1 cell is 3 pixels in 4k RGB format.
+      x += u8x8->x_offset;
+      
+      y = ((u8x8_tile_t *)arg_ptr)->y_pos;
+      y = y<<3;
+      y += y_offset;
+    
+      c = ((u8x8_tile_t *)arg_ptr)->cnt;
+      ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
+      
+      do
+      {
+
+        for( r = 0; r < 8; r++ )
+        {
+          u8x8_cad_SendCmd(u8x8,((x>>0)&0x0F)|0x00);
+          u8x8_cad_SendCmd(u8x8,((x>>4)&0x0F)|0x10);    
+          u8x8_cad_SendCmd(u8x8,((y>>0)&0x0F)|0x60);
+          u8x8_cad_SendCmd(u8x8,((y>>4)&0x0F)|0x70);
+          for (uint16_t i=0; i<c; i++)
+          {  
+            const uint8_t *low  = lut_nibble[*ptr & 0x0F];
+            const uint8_t *high = lut_nibble[*ptr >> 4];
+            
+            arr_4k[3] = low[1];
+            arr_4k[2] = low[0];
+            arr_4k[1] = high[1];
+            arr_4k[0] = high[0];
+            
+            u8x8_cad_SendData(u8x8, 4, arr_4k);
+            ptr++;
+          }
+          y++;
+        }
+        arg_int--;
+      } while( arg_int > 0 );
+
+      
+      u8x8_cad_EndTransfer(u8x8);
+      break;
+    /*	handled in the calling procedure 
+    case U8X8_MSG_DISPLAY_SETUP_MEMORY:
+      u8x8_d_helper_display_setup_memory(u8x8, &u8x8_uc1611_128x64_display_info);
+      break;
+    case U8X8_MSG_DISPLAY_INIT:
+      u8x8_d_helper_display_init(u8x8);
+      u8x8_cad_SendSequence(u8x8, u8x8_d_uc1701_dogs102_init_seq);
+      break;
+    */
+#ifdef U8X8_WITH_SET_CONTRAST
+    case U8X8_MSG_DISPLAY_SET_CONTRAST:
+      u8x8_cad_StartTransfer(u8x8);
+      u8x8_cad_SendCmd(u8x8, 0x081 );
+      u8x8_cad_SendArg(u8x8, arg_int  );	/* uc1611 has range from 0 to 255 */
+      u8x8_cad_EndTransfer(u8x8);
+      break;
+#endif
+    default:
+      return 0;
+  }
+  return 1;
+}
+
+
+static const u8x8_display_info_t u8x8_uc1698u_240x64_display_info =
+{
+  /* chip_enable_level = */ 0,			/* use CS0 of the UC1698 */
+  /* chip_disable_level = */ 1,
+  
+  /* post_chip_enable_wait_ns = */ 10,	/* uc1611 datasheet, page 60, actually 0 */
+  /* pre_chip_disable_wait_ns = */ 10,	/* uc1611 datasheet, page 60, actually 0 */
+  /* reset_pulse_width_ms = */     20, 
+  /* post_reset_wait_ms = */    200, 	/* uc1611 datasheet, page 67 */
+  /* sda_setup_time_ns = */ 10,		/* uc1611 datasheet, page 64, actually 0 */
+  /* sck_pulse_width_ns = */ 60,	/* half of cycle time  */
+  /* sck_clock_hz = */ 8000000UL,	/* since Arduino 1.6.0, the SPI bus speed in Hz. Should be  1000000000/sck_pulse_width_ns */
+  /* spi_mode = */ 0,		/* active high, rising edge */
+  /* i2c_bus_clock_100kHz = */ 4,
+  /* data_setup_time_ns = */ 30,	/* uc1611 datasheet, page 60 */
+  /* write_pulse_width_ns = */ 80,	/* uc1611 datasheet, page 60 */
+  /* tile_width = */ 30,		/* width of 30*8=240 pixel */
+  /* tile_height = */ 8,
+  /* default_x_offset = */ 0,
+  /* flipmode_x_offset = */ 0,
+  /* pixel_width = */ 240,
+  /* pixel_height = */ 64
+};
+
+/*
+System Reset: E2H 	--> DONE
+Set Temp. Compensation: 24H --> DONE
+Set up LCD format specific parameters MX,MY,etc(double-byte command): C0H,04H  --> FLIP0
+Set line rate: A3H --> DONE
+Set Pump Control (internal Vlcd): 2FH --> DONE
+Set Isolation Clock Front (3 bytes command): 82H, 13H, 01H  --> DONE
+Set Isolation Clock Back (3 bytes command): 82H, 14H, 00H  --> DONE
+Set LCD Bias Ratio: EAH 
+LCD Specific Operation Voltage Setting (double-byte command): 81H, 90H --> DONE
+Set RAM Address Control: 80H --> DOES NOT MAKE SENSE
+Set Page Addr. MSB: 72H 		--> DONE
+Set Page Addr. LSB : 60H 		--> DONE
+Set Column Addr. LSB: 00H 		--> DONE
+Set Column Addr.MSB: 10H 		--> DONE
+Window Program Enable : F8H 		--> NOT REQURED
+Window Starting Column (double-byte command): F4H , 00H --> NOT REQURED
+Window Ending Column (double-byte command): F6H, 9FH --> NOT REQURED
+Set one bit for one pixel: D1H 		--> DONE
+Set Display Enable: A9H 
+*/
+
+static const uint8_t u8x8_d_uc1698u_240x64_init_seq[] = {
+    
+  U8X8_START_TRANSFER(),             	/* enable chip, delay is part of the transfer start */
+  U8X8_C(0x0e2),		        /* system reset */
+  U8X8_DLY(10),
+  
+  /*power control*/					
+	U8X8_C(0x0e9),			//Bias Ratio:1/10 bias
+	U8X8_C(0x02b),			//power control set as internal power
+	U8X8_C(0x024),			//set temperate compensation as 0%
+	U8X8_C(0x081),			//electronic potentionmeter
+	U8X8_C(0x096),	                //start contrast level
+
+	/*display control*/
+	U8X8_C(0x0a4),			//all pixel off 
+	U8X8_C(0x0a6),			//inverse display off
+
+	/*lcd control*/
+	U8X8_C(0x0c4),			//Set LCD Maping Control (MY=1, MX=0)
+       
+        
+        
+        U8X8_C(0x0a1),			//line rate 15.2klps
+	U8X8_C(0x0d1),			//rgb-rgb
+        
+//        U8X8_C(0x0d6),			//64k color mode
+        U8X8_C(0x0d5),			//4k color mode
+ 	      
+	U8X8_C(0x084),			//12:partial display control disable
+
+
+	/*n-line inversion*/
+	U8X8_C(0x0c8),
+	U8X8_C(0x010),			//enable NIV
+
+	/*com scan fuction*/
+	U8X8_C(0x0da),			//enable FRC,PWM,LRM sequence
+
+	/* window covers the complete RAM*/
+	U8X8_C(0x0f4),			//wpc0:column
+	U8X8_C(0),			//
+	U8X8_C(0x0f6),			//wpc1
+	U8X8_C(127),			//
+
+	U8X8_C(0x0f5),			//wpp0:row
+	U8X8_C(0),			//start from 0
+	U8X8_C(0x0f7),			//wpp1
+	U8X8_C(159),			//end 160
+        
+	U8X8_C(0x0f8),			//inside window mode 
+
+	U8X8_C(0x089),			//RAM control /** Draw right then down **/
+
+	
+	/*scroll line*/
+	U8X8_C(0x040),			//low bit of scroll line
+	U8X8_C(0x050),			//high bit of scroll line
+
+	U8X8_C(0x090),			//14:FLT,FLB set
+	U8X8_C(0x000),
+
+	/*partial display*/
+	U8X8_C(0x084),			//12,set partial display control:off
+	U8X8_C(0x0f1),			//com end
+	U8X8_C(0x09f),			//160
+	U8X8_C(0x0f2),			//display start 
+	U8X8_C(0x000),				//0
+	U8X8_C(0x0f3),			//display end
+	U8X8_C(0x0a0),	                //160
+  
+        U8X8_C(0x0ac),                   //display OFF,select on/off mode.Green Enhance mode disable
+  
+  U8X8_END_TRANSFER(),             	/* disable chip */
+  U8X8_END()             		/* end of sequence */
+};
+
+uint8_t u8x8_d_uc1698_240x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
+{
+  /* call common procedure first and handle messages there */
+  if ( u8x8_d_uc1698u_common2(u8x8, /* y offset */ 12*8, msg, arg_int, arg_ptr) == 0 )
+  {
+    /* msg not handled, then try here */
+    switch(msg)
+    {
+      case U8X8_MSG_DISPLAY_SETUP_MEMORY:
+	u8x8_d_helper_display_setup_memory(u8x8, &u8x8_uc1698u_240x64_display_info);
+	break;
+      case U8X8_MSG_DISPLAY_INIT:
+	u8x8_d_helper_display_init(u8x8);
+	u8x8_cad_SendSequence(u8x8, u8x8_d_uc1698u_240x64_init_seq);
+	break;
+      case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
+	if ( arg_int == 0 )
+	  u8x8_cad_SendSequence(u8x8, u8x8_d_uc1698u_powersave0_seq);
+	else
+	  u8x8_cad_SendSequence(u8x8, u8x8_d_uc1698u_powersave1_seq);
+	break;
+      case U8X8_MSG_DISPLAY_SET_FLIP_MODE:
+	if ( arg_int == 0 )
+	{
+	  u8x8_cad_SendSequence(u8x8, u8x8_d_uc1698u_flip0_seq);
+	  u8x8->x_offset = u8x8->display_info->default_x_offset;
+	}
+	else
+	{
+	  u8x8_cad_SendSequence(u8x8, u8x8_d_uc1698u_flip1_seq);
+	  u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
+	}	
+	break;
+      default:
+	return 0;		/* msg unknown */
+    }
+  }
+  return 1;
+}
diff --git a/tools/codebuild/codebuild.c b/tools/codebuild/codebuild.c
index bde5c510..52e4a994 100644
--- a/tools/codebuild/codebuild.c
+++ b/tools/codebuild/codebuild.c
@@ -1423,6 +1423,15 @@ struct controller controller_list[] =
     }
   },  
 
+  {
+    "uc1698", 	30, 	8, 	"u8g2_ll_hvline_horizontal_right_lsb", "u8x8_cad_001", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
+    "", /* is_generate_u8g2_class= */ 1,
+    {
+      { "240x64" },
+      { NULL }
+    }
+  },  
+  
   {
     "st7511", 	40, 	30, 	"u8g2_ll_hvline_vertical_top_lsb", "u8x8_cad_011", "", COM_4WSPI|COM_3WSPI|COM_6800|COM_8080,
     "", /* is_generate_u8g2_class= */ 1,