* Converted indenting to Arduino-style

NewRemoteSwitch library/NewRemoteSwitch/examples/Retransmitter/Retransmitter.ino

@@ -1,12 +1,12 @@
 /*
 * Demo for RF remote switch receiver.
-* For details, see NewRemoteReceiver.h!
-*
-* Connect the transmitter to digital pin 11, and the receiver to digital pin 2.
-*
-* When run, this sketch waits for a valid code from a new-style the receiver, 
-* decodes it, and retransmits it after 5 seconds.
-*/
+ * For details, see NewRemoteReceiver.h!
+ *
+ * Connect the transmitter to digital pin 11, and the receiver to digital pin 2.
+ *
+ * When run, this sketch waits for a valid code from a new-style the receiver, 
+ * decodes it, and retransmits it after 5 seconds.
+ */
 
 #include <NewRemoteReceiver.h>
 #include <NewRemoteTransmitter.h>
@@ -22,31 +22,35 @@ void loop() {
 void retransmitter(NewRemoteCode receivedCode) {  
   // Disable the receiver; otherwise it might pick up the retransmit as well.
   NewRemoteReceiver::disable();
-  
+
   // Need interrupts for delay()
   interrupts();
-    
+
   // Wait 5 seconds before sending.
   delay(5000);
 
-  // Create a new transmitter with the received address and period, use digital pin 11 as output pin, and repeat the signal 2^3=8 times.
+  // Create a new transmitter with the received address and period, use digital pin 11 as output pin, and repeat the signal 2^3=8 times
+
   NewRemoteTransmitter transmitter(receivedCode.address, 11, receivedCode.period, 3);
-  
+
   // Switch type 0 = switch off, type 1 = switch on, type 2 = set dim level.
   if (receivedCode.switchType == 2) {
-	// Dimmer signal received
-	transmitter.sendDim(receivedCode.unit, receivedCode.dimLevel);	
-  } else {
-	// On/Off signal received
-	
-	if (receivedCode.groupBit) {
-		// Send to the group
-		transmitter.sendGroup(receivedCode.switchType);
-	} else {
-		// Send to a single unit
-		transmitter.sendUnit(receivedCode.unit, receivedCode.switchType);
-	}
+    // Dimmer signal received
+    transmitter.sendDim(receivedCode.unit, receivedCode.dimLevel);	
+  } 
+  else {
+    // On/Off signal received
+
+    if (receivedCode.groupBit) {
+      // Send to the group
+      transmitter.sendGroup(receivedCode.switchType);
+    } 
+    else {
+      // Send to a single unit
+      transmitter.sendUnit(receivedCode.unit, receivedCode.switchType);
+    }
   }
-  
+
   NewRemoteReceiver::enable();
-}
+}
+