moved to proper subfolder!

examples/BMP085test/BMP085test.pde

@@ -0,0 +1,44 @@
+#include <Wire.h>
+#include <BMP085.h>
+
+
+// Connect VCC of the BMP085 sensor to 3.3V (NOT 5.0V!)
+// Connect GND to Ground
+// Connect SCL to i2c clock - on '168/'328 Arduino Uno/Duemilanove/etc thats Analog 5
+// Connect SDA to i2c data - on '168/'328 Arduino Uno/Duemilanove/etc thats Analog 4
+// EOC is not used, it signifies an end of conversion
+// XCLR is a reset pin, also not used here
+
+BMP085 bmp;
+  
+void setup() {
+  Serial.begin(9600);
+  bmp.begin();  
+}
+  
+void loop() {
+    Serial.print("Temperature = ");
+    Serial.print(bmp.readTemperature());
+    Serial.println(" *C");
+    
+    Serial.print("Pressure = ");
+    Serial.print(bmp.readPressure());
+    Serial.println(" Pa");
+    
+    // Calculate altitude assuming 'standard' barometric
+    // pressure of 1013.25 millibar = 101325 Pascal
+    Serial.print("Altitude = ");
+    Serial.print(bmp.readAltitude());
+    Serial.println(" meters");
+
+  // you can get a more precise measurement of altitude
+  // if you know the current sea level pressure which will
+  // vary with weather and such. If it is 1015 millibars
+  // that is equal to 101500 Pascals.
+    Serial.print("Real altitude = ");
+    Serial.print(bmp.readAltitude(101500));
+    Serial.println(" meters");
+    
+    Serial.println();
+    delay(500);
+}