automatically updated release notes for mega-20181111

Webserver content-type set fix for /control handler

.github/issue_template.md

@@ -1,18 +1,68 @@
-**NOTE: This is not a support forum! For questions and support go here: https://www.letscontrolit.com/forum/viewforum.php?f=1**
+### Checklist
+- [ ] The title of this issue is "to the point" and descriptive.
+- [ ] This issue describes what is happening.
+- [ ] This issue describes what components are affected (e.g. name of plugin/controller)
+- [ ] This issue describes how to reproduce it.
+- [ ] This issue describes when it was introduced (when known) and what version is now showing the problem.
 
-### Steps to reproduce
-How can we trigger this problem?
+### I have...
+- [ ] searched the [issue tracker](https://github.com/letscontrolit/ESPEasy/issues) or the [forum](https://www.letscontrolit.com/forum/viewforum.php?f=1) for a similar issue. (include links when applicable)
+- [ ] entered a system description using "Copy info to clipboard" on the sysinfo page. (when possible)
+- [ ] entered the full filename of the used version (e.g. `ESP_Easy_mega-20181001_test_ESP8266_4096_VCC.bin` )
+- [ ] given a list of active plugins or controllers when applicable.
+- [ ] filled out all applicable fields below.
 
-Does the problem persists after powering off and on? (just resetting isn't enough sometimes)
+### Steps already tried...
+- [ ] Tried a clean install (empty `.bin` files are included in the ZIP)
+- [ ] Tested previous/other build (mention which one already tested)
+- [ ] Tested on other node to make sure hardware isn't defective.
+- [ ] Verified if the problem is limited to a single plugin/controller
+
+
+
+### If you self compile, please state this and PLEASE try to ONLY REPORT ISSUES WITH OFFICIAL BUILDS! ###
+<!--- If you self compile, please state this and PLEASE try to ONLY REPORT ISSUES WITH OFFICIAL BUILDS!  --->
+<!--- NOTE: This is not a support forum! For questions and support go here: --->
+<!--- https://www.letscontrolit.com/forum/viewforum.php?f=1 --->
+<!--- Remove topics that are not applicable to your feature request of issue --->
+<!--- Remember to have a "to the point" TITLE --->
+
+
+### Summarize of the problem/feature request
+<!--- Describe the problem or feature request --->
+YOUR TEXT GOES HERE
 
 ### Expected behavior
-Tell us what should happen?
+<!--- Tell us what should happen? --->
+YOUR TEXT GOES HERE
 
 ### Actual behavior
-Tell us what happens instead?
+<!--- Tell us what happens instead? --->
+YOUR TEXT GOES HERE
 
+### Steps to reproduce
+<!--- How can we trigger this problem? --->
+1. 
+2. 
+3. 
+
+<!--- Does the problem persists after powering off and on? (just resetting isn't enough sometimes) --->
+<!--- Please document if you have restarted the unit and if the problem is then gone etc. etc. --->
 ### System configuration
-
+<!--- Please add as much information and screenshots as possible  --->
 Hardware:
 
-Software or git version:
+<!--- You should also provide links to hardware pages etc where we can find more info  --->
+<!--- If you self compile, please state this and PLEASE try to ONLY REPORT ISSUES WITH OFFICIAL BUILDS!  --->
+ESP Easy version: 
+
+<!--- In order to have a better readablity of your issue then you should place screenshots here  --->
+<!--- Simply drag and drop them onto this template, move the text string below the "ESP Easy settings/screenshots" topic  --->
+ESP Easy settings/screenshots: 
+
+### Rules or log data
+<!--- place your code/rules between the two ``` rows  --->
+<!--- remove if not applicable!  --->
+```
+
+```

.gitignore

@@ -16,3 +16,11 @@
 ## Project #####################
 lib/readme.txt
 src/Custom.h
+/ESPEasy
+test/output_export.cpp
+.vscode
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+
+docs/build/

.travis.yml

@@ -22,17 +22,18 @@ addons:
 
 
 install:
-  - pip install -U platformio
+  - pip install -U platformio sphinx recommonmark sphinx_bootstrap_theme
 
 script:
-  # - cppcheck --enable=warning src/*.ino -q --force -I src --include=src/ESPEasy.ino --error-exitcode=1
-  # - ./memanalyzer.py ~/.platformio/packages/toolchain-xtensa/bin/xtensa-lx106-elf-objdump
-  - PLATFORMIO_BUILD_FLAGS="-D CONTINUOUS_INTEGRATION" platformio run 
-
+  - platformio update
   # patch platformio core libs for PUYA bug (https://github.com/letscontrolit/ESPEasy/issues/650)
   - cd patches; ./check_puya_patch; cd ..
-  - PLATFORMIO_BUILD_FLAGS="-D CONTINUOUS_INTEGRATION" platformio run -s --environment dev_ESP8266PUYA_1024
 
+  # - bash ./preflight.sh # make sure input files are OK before wasting time with prereqs
+  # - cppcheck --enable=warning src/*.ino -q --force -I src --include=src/ESPEasy.ino --error-exitcode=1
+  # - ./memanalyzer.py ~/.platformio/packages/toolchain-xtensa/bin/xtensa-lx106-elf-objdump
+  - PLATFORMIO_BUILD_FLAGS="-D CONTINUOUS_INTEGRATION" platformio run
+  - PLATFORMIO_BUILD_FLAGS="-D CONTINUOUS_INTEGRATION" platformio run
 
 before_deploy:
   - ./before_deploy

README

@@ -0,0 +1,8 @@
+The scripts in this directory are so called GIT hooks.
+Purpose is to do automatic changes after merge, commit and checkout.
+
+Those files are for a Linux-like environment with basic tools ln, grep, sed and bash.
+
+Windows users can see them as template.
+
+To use them simply copy those files into your ESPEasy/.git/hooks directory.

README.md

@@ -1,6 +1,11 @@
+|Latest Nightly  | Build Status | Patreon | Ko-Fi | PayPal |
+|-------|-------|-------|-------|-------|
+| [![GitHub version](https://img.shields.io/github/release/letscontrolit/ESPEasy/all.svg)](https://github.com/letscontrolit/ESPEasy/releases/latest) | [![Build Status](https://travis-ci.org/letscontrolit/ESPEasy.svg?branch=mega)](https://travis-ci.org/letscontrolit/ESPEasy) | [![donate](https://img.shields.io/badge/donate-Patreon-blue.svg)](https://www.patreon.com/GrovkillenTDer) | [![donate](https://img.shields.io/badge/donate-KoFi-blue.svg)](https://ko-fi.com/grovkillentder) | [![donate](https://img.shields.io/badge/donate-PayPal-blue.svg)](https://www.paypal.me/espeasy) |
+
+For ways to *support* us, see [this announcement on the forum](https://www.letscontrolit.com/forum/viewtopic.php?f=14&t=5787), or have a look at the [Patreon](https://www.patreon.com/GrovkillenTDer), [Ko-Fi](https://ko-fi.com/grovkillentder) or [PayPal](https://www.paypal.me/espeasy) links above.
+
 # ESPEasy (development branch)
 
-Build status: [![Build Status](https://travis-ci.org/letscontrolit/ESPEasy.svg?branch=mega)](https://travis-ci.org/letscontrolit/ESPEasy)
 
 Introduction and wiki: https://www.letscontrolit.com/wiki/index.php/ESPEasy#Introduction
 
@@ -36,4 +41,4 @@ ESPEasy_mega-20180102_dev_ESP8285_1024.bin     | ESP8285 with 1Mb flash  | Stabl
 
 Details and discussion are on the Experimental forum: https://www.letscontrolit.com/forum/viewforum.php?f=18
 
-We're also on IRC: #ESPEasy @freenode
+Automated builds of the (new) documentation can be found at [ESPEasy.readthedocs.io](https://espeasy.readthedocs.io/en/latest/)

before_deploy

@@ -10,6 +10,9 @@ for ENV in \
   normal_ESP8266_1024 \
   normal_ESP8266_4096 \
   normal_ESP8285_1024 \
+  normal_IR_ESP8266_4096 \
+  normal_core_241_ESP8266_1024 \
+  normal_core_241_ESP8266_4096 \
   test_ESP8266_1024\
   test_ESP8266_4096\
   test_ESP8266_4096_VCC\
@@ -17,23 +20,32 @@ for ENV in \
   dev_ESP8266_1024\
   dev_ESP8266_4096\
   dev_ESP8285_1024\
-  dev_ESP8266PUYA_1024\
-  dev_ESP8266PUYA_1024_VCC;\
+  hard_SONOFF_POW\
+  hard_SONOFF_POW_R2_4M\
+  minimal_ESP8266_1024_OTA\
+  minimal_ESP8285_1024_OTA\
+  esp32dev\
+  esp32test_1M8_partition;\
 do
   echo
   echo "### Deploying environment $ENV for version $VERSION"
-  BIN=.pioenvs/$ENV/firmware.bin
+  BIN=.pioenvs/${ENV}/ESP_Easy_${VERSION}_${ENV}.bin
+  cp .pioenvs/${ENV}/firmware.bin $BIN
   python2 crc2.py $BIN
-  cp $BIN dist/"ESP_Easy_$VERSION""_$ENV.bin"
+  mv $BIN "dist/bin/ESP_Easy_${VERSION}_${ENV}.bin"
 done
 
 
 #create a source structure that is the same as the original ESPEasy project (and works with the howto on the wiki)
-rm -rf dist/Source 2>/dev/null
-mkdir dist/Source
-cp -r lib dist/Source/
-cp -r src dist/Source/
-cp platformio.ini dist/Source/
+#rm -rf dist/Source 2>/dev/null
+rm -rf dist/Docs 2>/dev/null
+
+mkdir -p dist/source
+#mkdir -p dist/docs
+cp -r lib dist/source/
+cp -r src dist/source/
+#cp -r docs/build/ dist/docs/
+cp platformio.ini dist/source/
 
 cd dist
 

crc2.py

@@ -5,10 +5,10 @@ import struct
 import md5
 import os
 MD5DUMMY      = "MD5_MD5_MD5_MD5_BoundariesOfTheSegmentsGoHere..." #48 chars
-FILENAMEDUMMY = "ThisIsTheDummyPlaceHolderForTheBinaryFilename..." #48 chars
+FILENAMEDUMMY = "ThisIsTheDummyPlaceHolderForTheBinaryFilename64ByteLongFilenames" #64 chars
 
 MemorySegmentStart,MemorySegmentEnd,MemoryContent=[],[],[]
- 
+
 ##################################################################
 # this subroutine shows the segments of a  part
 ##################################################################
@@ -18,7 +18,7 @@ def showSegments (fileContent,offset):
     herestr =""
     herestr2 =""
     MemorySegmentStart.append(struct.pack("I",header[0]))
-    MemorySegmentEnd.append(struct.pack("I",header[0]+header[1])) 
+    MemorySegmentEnd.append(struct.pack("I",header[0]+header[1]))
     MemoryContent.append(fileContent[offset+8:offset+8+header[1]])
     if  fileContent.find( MD5DUMMY, offset+8, offset+8+header[1]) >0 :
         herestr= " <-- CRC is here."
@@ -42,7 +42,7 @@ def showParts(fileContent, offset):
     return nextSegmentOffset
 
 ##################################################################
-# MAIN 
+# MAIN
 ##################################################################
 
 #if len(sys.argv) !=2 :
@@ -71,46 +71,46 @@ includeStr = "hash includes segments:"
 # 4: RAM
 
 for i in (1,2 ):     # use only stable segments, must be 4 in total. We use 2.
-    startArray =startArray + MemorySegmentStart[i] 
-    endArray =  endArray   + MemorySegmentEnd[i] 
+    startArray =startArray + MemorySegmentStart[i]
+    endArray =  endArray   + MemorySegmentEnd[i]
     hashString =hashString + MemoryContent[i]
     with open(FileName+str(i), mode='wb') as file: # b is important -> binary
       file.write(MemoryContent[i])
     includeStr = includeStr +" "+ str(i)
 print (includeStr)
-# IMPORTANT: pad array with zeros if you use only 3 segments (see above)    
-while len(startArray) < 16 : 
-	startArray =startArray + struct.pack("I",0) 
-	endArray =  endArray   + struct.pack("I",0) 
-# debug print (binascii.hexlify(startArray)) 
+# IMPORTANT: pad array with zeros if you use only 3 segments (see above)
+while len(startArray) < 16 :
+	startArray =startArray + struct.pack("I",0)
+	endArray =  endArray   + struct.pack("I",0)
+# debug print (binascii.hexlify(startArray))
 # debug print (binascii.hexlify(endArray))
 if (len(endArray) + len (startArray)) != 32 :
-    print("ERROR: please make sure you add / remove padding if you change the semgents.") 
+    print("ERROR: please make sure you add / remove padding if you change the semgents.")
 
 BinaryFileName = "";
 if  fileContent.find( FILENAMEDUMMY) < 0:
     print("ERROR: FILENAMEDUMMY dummy not found in binary")
 else:
 	BinaryFileName=os.path.basename(FileName) +"\0"
-	if len(BinaryFileName) >48:								# check that filename is <48 chars
-		BinaryFileName=BinaryFileName[0:48]					# truncate if necessary. 49th char in ESP is zero already
+	if len(BinaryFileName) >64:								# check that filename is <48 chars
+		BinaryFileName=BinaryFileName[0:64]					# truncate if necessary. 49th char in ESP is zero already
 	else:
-		BinaryFileName= BinaryFileName.ljust(48,'\0');		# pad with zeros. 	
-			
+		BinaryFileName= BinaryFileName.ljust(64,'\0');		# pad with zeros.
+
 
 if  fileContent.find( MD5DUMMY) < 0:
     print("ERROR: MD5 dummy not found in binary")
 else:
-    hashString=hashString.replace (MD5DUMMY,"",1) 
+    hashString=hashString.replace (MD5DUMMY,"",1)
     m = md5.new()
     m.update (hashString) #use segment 1
     md5hash = m.digest()
     print("MD5 hash: "+ m.hexdigest())
     print("\nwriting output file:\n" + FileName)
-	
+
     fileContent=fileContent.replace(MD5DUMMY,md5hash+startArray+endArray)
     fileContent=fileContent.replace(FILENAMEDUMMY,BinaryFileName)
 
     with open(FileName, mode='wb') as file: # b is important -> binary
       file.write(fileContent)
-#k=input("press close to exit") 
+#k=input("press close to exit")

dist/README.txt

@@ -0,0 +1,66 @@
+  _____ ____  ____
+ | ____/ ___||  _ \ ___  __ _ ___ _   _
+ |  _| \___ \| |_) / _ \/ _` / __| | | |
+ | |___ ___) |  __/  __/ (_| \__ \ |_| |
+ |_____|____/|_|   \___|\__,_|___/\__, |
+                                  |___/
+
+
+This is the distribution folder for ESPeasy.
+In here you will find a flash tool to program the ESP module.
+
+Also a number of binary images is included.
+
+The filename is quite descriptive:
+  ESP_Easy_mega-<date>_<buildType>_<chip>_<memorySize>.bin
+
+Build type can be:  (differ in included plugins)
+- normal  => Only Stable plugins and controllers
+- test    => Stable + Testing
+- dev     => Stable + Testing + Development
+
+There is also a number of special builds:
+- normal_IR => "Normal" + IR receiver/transmitter plugins and library
+- hard_xxxxx => Special builds for some off-the-shelf hardware.
+- normal_core_241 => "Normal" using core 2.4.1, since 2.4.2 has issues with PWM
+- minimal_ESP82xx_1024_OTA => Minimum number of plugins and a limited set of controllers included to be able to perform a 2-step OTA on 1 MB flash nodes.
+
+Chip can be:
+- ESP8266      => Most likely option
+- ESP8285      => Used in some Sonoff modules
+- ESP32        => Experimental support at this moment
+
+MemorySize can be:
+- 1024  => 1 MB flash modules (e.g. almost all Sonoff modules)
+- 2048  => 2 MB flash modules (e.g. Shelly1/WROOM02)
+- 4096  => 4 MB flash modules (e.g. NodeMCU/ESP32)
+
+ESP32 now has 2 builds:
+- esp32dev   Using the default partition layout (1.4 MB for the sketch)
+- esp32test_1M8_partition   Larger sketch partition (1.8MB) smaller SPIFFS (316 kB)
+
+Please note that changing between those versions will destroy the settings!
+The SPIFFS partition will be lost and that contains all settings.
+
+
+To help recover from a bad flash, there are also blank images included.
+- blank_1MB.bin
+- blank_2MB.bin
+- blank_4MB.bin
+
+When the wrong image is flashed, or the module behaves unstable, or is in a reboot loop,
+flash these images first and then the right image for the module.
+
+ESP.Easy.Flasher.exe...
+... is the new flashing tool for ESP Easy. You need to run it in elevated mode (as admin)
+for it to fetch the COM ports correctly. If you want you may save YOUR settings using the
+"Save as default settings" button in the lower left corner. If the window is too big or
+too small you can experiment with the "Pixels Per Inch" variable in the
+..\Settings\Default.ini file. Setting it to =96 is working for most users but the
+application will try to find the most optimal value by default. Sometimes it fails to
+do that. More information about the tool is found here:
+https://github.com/Grovkillen/ESP_Easy_Flasher
+
+Further reading:
+For more information, see: https://github.com/letscontrolit/ESPEasy
+Or our forum: https://www.letscontrolit.com/forum/

docs/Makefile

@@ -0,0 +1,19 @@
+# Minimal makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+SOURCEDIR     = source
+BUILDDIR      = build
+
+# Put it first so that "make" without argument is like "make help".
+help:
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+
+.PHONY: help Makefile
+
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

docs/make.bat

@@ -0,0 +1,35 @@
+@ECHO OFF
+
+pushd %~dp0
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set SOURCEDIR=source
+set BUILDDIR=build
+
+if "%1" == "" goto help
+
+%SPHINXBUILD% >NUL 2>NUL
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.http://sphinx-doc.org/
+	exit /b 1
+)
+
+%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
+goto end
+
+:help
+%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
+
+:end
+popd

docs/requirements.txt

@@ -0,0 +1,3 @@
+recommonmark
+Sphinx
+sphinx-bootstrap-theme

docs/source/Controller/Controller.rst

@@ -0,0 +1,66 @@
+Controller
+**********
+
+A controller is a component to enable a plugin to send data elsewhere.
+
+- Up-to 3 controllers can be active in ESPEasy.
+- Per plugin up-to 3 active controllers can be selected.
+- For some controllers an additional parameter can be given.
+
+For example, Domoticz needs an 'IDX' value to identify the configured entry in
+Domoticz for which new data is sent.
+
+Controller Parameters
+=====================
+
+Generic fields
+--------------
+
+- **Protocol** - The type of controller (e.g. ThingSpeak/OpenHAB MQTT/etc.)
+- **Locate Controller** - Selection between hostname/IP
+- **Controller Hostname/IP**  - The address to reach the selected service
+- **Controller Port** - TCP/UDP Port number (0...65536)
+- **Enabled** - Whether or not the controller is active.
+
+Send queue parameters
+---------------------
+
+Controllers have a queue to keep unsent messages.
+This queue is used to handle message bursts and also store messages which are recorded
+before WiFi connection is made or during lost connection.
+
+- **Minimum Send Interval** - Minimum time between two messages in msec.
+- **Max Queue Depth** - Maximum length of the buffer queue to keep unsent messages.
+- **Max Retries** - Maximum number of retries to send a message.
+- **Full Queue Action** - How to handle when queue is full, ignore new or delete oldest message.
+- **Client Timeout** - Timeout in msec for an network connection used by the controller.
+- **Check Reply** - When set to false, a sent message is considered always successful.
+
+
+Sample ThingSpeak configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Some controllers, like ThingSpeak, need a specific configuration.
+ThingSpeak only allows a message every 15 seconds for the free accounts.
+
+- **Minimum Send Interval** - 15000 msec
+- **Max Queue Depth** - 1 (only report the last value)
+- **Max Retries** - 2
+- **Full Queue Action** - Delete Oldest
+- **Client Timeout** - 500 msec (server is online, so timeout must be a bit longer)
+
+
+Controller user credentials
+---------------------------
+
+- **Controller User** - User name (optional)
+- **Controller Password** - Password (optional)
+
+MQTT related settings
+---------------------
+
+- **Controller Subscribe** - Subscribe to the given topic.
+- **Controller Publish** - Publish to the given topic.
+- **Controller lwl topic** - Topic to which LWT (Last Will Testament) messages should be sent.
+- **LWT Connect Message** - Connection established message.
+- **LWT Disconnect Message** - Connection lost message (sent to broker during connect and published by broker when connection is lost)

docs/source/ESPEasy/AboutUs.rst

@@ -0,0 +1,2 @@
+About Us
+********

docs/source/ESPEasy/FunctionBlocks.rst

@@ -0,0 +1,2 @@
+ESPEasy Function Blocks
+***********************

docs/source/Participate/Documentation.rst

@@ -0,0 +1,35 @@
+Documentation
+*************
+
+For documentation we use Sphinx and this will be read by ReadTheDocs.
+We use the `Sphinx Bootstrap Theme <https://github.com/ryan-roemer/sphinx-bootstrap-theme>`_
+
+This documentation is included in the GitHub repository.
+It allows us to create documentation per version of ESPEasy.
+
+See also the `ESPEasy wiki <https://www.letscontrolit.com/wiki/index.php/ESPEasy>`_
+for more documentation which has not been moved here.
+
+Needed Python packages::
+
+   pip install sphinx recommonmark sphinx_bootstrap_theme
+
+PlatformIO with Atom
+====================
+
+With the ESPEasy project open in Atom, open the PIO terminal in Atom.
+
+Install dependencies::
+
+   cd docs
+   pip install ... (see needed Python packages above)
+
+Build on Windows::
+
+   cd docs
+   .\make.bat html
+
+Build on Linux/Mac::
+
+   cd docs
+   ./make html

docs/source/Plugin/Plugin.rst

@@ -0,0 +1,2 @@
+Plugins
+*******

docs/source/Reference/Command.rst

@@ -0,0 +1,2 @@
+Command Reference
+*****************

docs/source/Reference/SystemVariable.rst

@@ -0,0 +1,2 @@
+System Variables
+****************

docs/source/Rules/Rules.rst

@@ -0,0 +1,2 @@
+Rules
+*****

docs/source/WiFi/WiFi.rst

@@ -0,0 +1,25 @@
+WiFi
+****
+
+WiFi disconnect reasons
+=======================
+
+Beacon timeout (200)
+--------------------
+
+For more information on the Beacon frame, see `Wikipedia <https://en.wikipedia.org/wiki/Beacon_frame>`_.
+
+In short, the access point sends periodically a packet containing information about the network.
+This interval is typically 100 TU (102.4 msec).
+The ESP module is trying to listen to this beacon every time, but for a number of reasons it may
+miss a beacon frame.
+The timeout is longer than 100 TU, so it must miss a number of these beacon frames
+to report a beacon timeout.
+Reasons to miss such a beacon frame are:
+
+- too busy processing other blocking tasks (very likely)
+- access point not sending a beacon due to high traffic demands of others (depending on brand/model/settings)
+- RF disturbances (not likely given how often this occurs)
+- clock drift (not really likely)
+
+So the "beacon timeout" is happening every now and then on the ESP nodes and ESPeasy will try to reconnect.

docs/source/conf.py

@@ -0,0 +1,286 @@
+# -*- coding: utf-8 -*-
+#
+# Configuration file for the Sphinx documentation builder.
+#
+# This file does only contain a selection of the most common options. For a
+# full list see the documentation:
+# http://www.sphinx-doc.org/en/master/config
+
+# -- Path setup --------------------------------------------------------------
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#
+# import os
+# import sys
+# sys.path.insert(0, os.path.abspath('.'))
+from recommonmark.parser import CommonMarkParser
+import sphinx_bootstrap_theme
+
+
+# -- Project information -----------------------------------------------------
+
+project = u'ESPEasy'
+copyright = u'2018, ESPEasy'
+author = u'Many'
+
+# The short X.Y version
+version = u''
+# The full version, including alpha/beta/rc tags
+release = u'2.1b1'
+
+
+# -- General configuration ---------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#
+# needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+    'sphinx.ext.autodoc',
+    'sphinx.ext.intersphinx',
+    'sphinx.ext.todo',
+    'sphinx.ext.imgmath',
+    'sphinx.ext.imgconverter',
+]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+source_parsers = {
+    '.md': CommonMarkParser,
+}
+
+# The suffix(es) of source filenames.
+# You can specify multiple suffix as a list of string:
+#
+source_suffix = ['.rst', '.md']
+#source_suffix = '.rst'
+
+# The master toctree document.
+master_doc = 'index'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = None
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This pattern also affects html_static_path and html_extra_path.
+exclude_patterns = []
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = None
+
+
+# -- Options for HTML output -------------------------------------------------
+html_logo = 'ESPEasy/espeasy_logo.png'
+html_favicon = 'ESPEasy/favicon.ico'
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
+#html_theme = 'sphinx_rtd_theme'
+html_theme = 'bootstrap'
+html_theme_path = sphinx_bootstrap_theme.get_html_theme_path()
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#
+# html_theme_options = {}
+#html_theme_options = {
+#    'canonical_url': '',
+#    'analytics_id': '',
+#    'logo_only': False,
+#    'display_version': True,
+#    'prev_next_buttons_location': 'bottom',
+#    'style_external_links': False,
+#    # Toc options
+#    'collapse_navigation': True,
+#    'sticky_navigation': True,
+#    'navigation_depth': 4,
+#    'includehidden': True,
+#    'titles_only': False
+#}
+
+html_theme_options = {
+    # Navigation bar title. (Default: ``project`` value)
+    'navbar_title': "ESPEasy",
+
+    # Tab name for entire site. (Default: "Site")
+    'navbar_site_name': "Site",
+
+    # A list of tuples containing pages or urls to link to.
+    # Valid tuples should be in the following forms:
+    #    (name, page)                 # a link to a page
+    #    (name, "/aa/bb", 1)          # a link to an arbitrary relative url
+    #    (name, "http://example.com", True) # arbitrary absolute url
+    # Note the "1" or "True" value above as the third argument to indicate
+    # an arbitrary url.
+    'navbar_links': [
+        ("Rules", "rules"),
+        ("Forum", "https://www.letscontrolit.com/forum/viewforum.php?f=1", True),
+    ],
+
+    # Render the next and previous page links in navbar. (Default: true)
+    'navbar_sidebarrel': True,
+
+    # Render the current pages TOC in the navbar. (Default: true)
+    'navbar_pagenav': True,
+
+    # Tab name for the current pages TOC. (Default: "Page")
+    'navbar_pagenav_name': "Page",
+
+    # Global TOC depth for "site" navbar tab. (Default: 1)
+    # Switching to -1 shows all levels.
+    'globaltoc_depth': 2,
+
+    # Include hidden TOCs in Site navbar?
+    #
+    # Note: If this is "false", you cannot have mixed ``:hidden:`` and
+    # non-hidden ``toctree`` directives in the same page, or else the build
+    # will break.
+    #
+    # Values: "true" (default) or "false"
+    'globaltoc_includehidden': "true",
+
+    # HTML navbar class (Default: "navbar") to attach to <div> element.
+    # For black navbar, do "navbar navbar-inverse"
+    'navbar_class': "navbar navbar-inverse",
+
+    # Fix navigation bar to top of page?
+    # Values: "true" (default) or "false"
+    'navbar_fixed_top': "true",
+
+    # Location of link to source.
+    # Options are "nav" (default), "footer" or anything else to exclude.
+    'source_link_position': "none",
+
+    # Bootswatch (http://bootswatch.com/) theme.
+    #
+    # Options are nothing (default) or the name of a valid theme
+    # such as "cosmo" or "sandstone".
+    #
+    # The set of valid themes depend on the version of Bootstrap
+    # that's used (the next config option).
+    #
+    # Currently, the supported themes are:
+    # - Bootstrap 2: https://bootswatch.com/2
+    # - Bootstrap 3: https://bootswatch.com/3
+    'bootswatch_theme': "cerulean",
+
+    # Choose Bootstrap version.
+    # Values: "3" (default) or "2" (in quotes)
+    'bootstrap_version': "3",
+}
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+# Custom sidebar templates, must be a dictionary that maps document names
+# to template names.
+#
+# The default sidebars (for documents that don't match any pattern) are
+# defined by theme itself.  Builtin themes are using these templates by
+# default: ``['localtoc.html', 'relations.html', 'sourcelink.html',
+# 'searchbox.html']``.
+#
+# html_sidebars = {}
+
+
+# -- Options for HTMLHelp output ---------------------------------------------
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'ESPEasydoc'
+
+
+# -- Options for LaTeX output ------------------------------------------------
+
+latex_elements = {
+    # The paper size ('letterpaper' or 'a4paper').
+    #
+    # 'papersize': 'letterpaper',
+
+    # The font size ('10pt', '11pt' or '12pt').
+    #
+    # 'pointsize': '10pt',
+
+    # Additional stuff for the LaTeX preamble.
+    #
+    # 'preamble': '',
+
+    # Latex figure (float) alignment
+    #
+    # 'figure_align': 'htbp',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [
+    (master_doc, 'ESPEasy.tex', u'ESPEasy Documentation',
+     u'Many', 'manual'),
+]
+
+
+# -- Options for manual page output ------------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    (master_doc, 'espeasy', u'ESPEasy Documentation',
+     [author], 1)
+]
+
+
+# -- Options for Texinfo output ----------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    (master_doc, 'ESPEasy', u'ESPEasy Documentation',
+     author, 'ESPEasy', 'ESP82xx/ESP32 firmware to connect people with any level of experience to system automation.',
+     'Miscellaneous'),
+]
+
+
+# -- Options for Epub output -------------------------------------------------
+
+# Bibliographic Dublin Core info.
+epub_title = project
+
+# The unique identifier of the text. This can be a ISBN number
+# or the project homepage.
+#
+# epub_identifier = ''
+
+# A unique identification for the text.
+#
+# epub_uid = ''
+
+# A list of files that should not be packed into the epub file.
+epub_exclude_files = ['search.html']
+
+
+# -- Extension configuration -------------------------------------------------
+
+# -- Options for intersphinx extension ---------------------------------------
+
+# Example configuration for intersphinx: refer to the Python standard library.
+intersphinx_mapping = {'https://docs.python.org/': None}
+
+# -- Options for todo extension ----------------------------------------------
+
+# If true, `todo` and `todoList` produce output, else they produce nothing.
+todo_include_todos = True

docs/source/index.rst

@@ -0,0 +1,39 @@
+.. ESPEasy documentation master file, created by
+   sphinx-quickstart on Sat Oct 06 22:34:34 2018.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
+
+Welcome to ESPEasy's documentation!
+===================================
+
+.. toctree::
+   :maxdepth: 2
+   :caption: Table of Contents
+
+   ESPEasy/AboutUs.rst
+   ESPEasy/FunctionBlocks.rst
+   Controller/Controller.rst
+   Plugin/Plugin.rst
+   Rules/Rules.rst
+   WiFi/WiFi.rst
+
+.. raw:: latex
+
+   \appendix
+
+
+.. toctree::
+   :caption: Appendix
+
+   Participate/Documentation.rst
+   Reference/Command.rst
+   Reference/SystemVariable.rst
+
+
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`

embed_files.sh

@@ -0,0 +1,82 @@
+#!/bin/bash
+
+#
+# This script walks through the assets folder and minifys all JS, HTML, CSS and SVG files. It also generates
+# the corresponding constants that are added to the data.h file on esp8266_deauther folder.
+#
+# @Author Erick B. Tedeschi < erickbt86 [at] gmail [dot] com >
+# @Author Wandmalfarbe https://github.com/Wandmalfarbe
+#
+# See: https://github.com/letscontrolit/ESPEasy/issues/1671#issuecomment-415144898
+
+outputfile="$(pwd)/data_h_temp"
+
+rm $outputfile
+
+function minify_html_css {
+	file=$1
+	curl -X POST -s --data-urlencode "input@$file" http://html-minifier.com/raw > /tmp/converter.temp
+}
+
+function minify_js {
+	file=$1
+	curl -X POST -s --data-urlencode "input@$file" https://javascript-minifier.com/raw > /tmp/converter.temp
+}
+
+function minify_svg {
+	file=$1
+	svgo -i /Users/User/Desktop/icons/tools.svg -o - > /tmp/converter.temp
+}
+
+function ascii2hexCstyle {
+	file_name=$(constFileName $1)
+	result=$(cat /tmp/converter.temp | hexdump -ve '1/1 "0x%.2x,"')
+	result=$(echo $result | sed 's/,$//')
+	echo "const char DATA_${file_name}[] PROGMEM = {$result};"
+}
+
+function constFileName {
+	extension=$(echo $1 | egrep -io "(json|svg|css|js|html)$" | tr "[:lower:]" "[:upper:]")
+	file=$(echo $1 | sed 's/\.json//' | sed 's/\.svg//' | sed 's/\.css//' | sed 's/\.html//' | sed 's/\.js//' | sed 's/\.\///' | tr '/' '_' | tr '.' '_' | tr '-' '_' | tr "[:lower:]" "[:upper:]")
+	underscore="_"
+	echo $file$underscore$extension
+}
+
+
+cd static
+file_list=$(find . -type f)
+
+for file in $file_list; do
+	echo "Processing: $file"
+	file_name=$(constFileName $file)
+	echo "  Array Name: $file_name"
+
+	if [[ "$file" == *.min.js ]]; then
+		echo "  JS already minified"
+		cat $file > /tmp/converter.temp
+		ascii2hexCstyle $file >> $outputfile
+	elif [[ "$file" == *.js ]]; then
+		echo "  JS minify"
+		minify_js $file
+		ascii2hexCstyle $file >> $outputfile
+	elif [[ "$file" == *.min.css ]]; then
+		echo "  CSS already minified"
+		cat $file > /tmp/converter.temp
+		ascii2hexCstyle $file >> $outputfile
+	elif [[ "$file" == *.html ]] || [[ "$file" == *.css ]]; then
+		echo "  HTML and CSS minify"
+		minify_html_css $file
+		ascii2hexCstyle $file >> $outputfile
+	elif [[ "$file" == *.svg ]]; then
+		echo "  SVG minify"
+		minify_svg $file
+		ascii2hexCstyle $file >> $outputfile
+	else
+		echo "  without minifier"
+		cat $file > /tmp/converter.temp
+		ascii2hexCstyle $file >> $outputfile
+	fi
+	echo ""
+	sleep 1
+done
+

esp32_partition_app1310k_spiffs1503k.csv

@@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x140000,
+app1,     app,  ota_1,   0x150000,0x140000,
+eeprom,   data, 0x99,    0x290000,0x1000,
+spiffs,   data, spiffs,  0x291000,0x16F000,

esp32_partition_app1810k_spiffs316k.csv

@@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x1D0000,
+app1,     app,  ota_1,   0x1E0000,0x1D0000,
+eeprom,   data, 0x99,    0x3B0000,0x1000,
+spiffs,   data, spiffs,  0x3B1000,0x4F000,

hooks/post-checkout

@@ -0,0 +1,11 @@
+#!/bin/bash
+# purpose: GIT post-commit
+#   change value of BUILD_GIT macro 
+#
+WORKDIR=src
+CUSTOM_H=${WORKDIR}/Custom.h
+GLOBAL_H=${WORKDIR}/ESPEasy-Globals.h
+
+# update BUILD_GIT on branch checkout
+[[ $3 == 1 && -f ${CUSTOM_H} ]] && \
+    sed -i.bak -e "s/\(#define BUILD_GIT\).*/\1 \"$(git log -1 --pretty=format:%h HEAD)\"/" ${CUSTOM_H}

hooks/post-commit

@@ -0,0 +1,10 @@
+#!/bin/bash
+# purpose: GIT post-commit
+#   change value of BUILD_GIT macro 
+#
+WORKDIR=src
+CUSTOM_H=${WORKDIR}/Custom.h
+GLOBAL_H=${WORKDIR}/ESPEasy-Globals.h
+
+[[ -f ${CUSTOM_H} ]] && \
+sed -i.bak -e "s/\(#define BUILD_GIT\).*/\1 \"$(git log -1 --pretty=format:%h HEAD)\"/" ${CUSTOM_H}

hooks/post-merge

@@ -0,0 +1,21 @@
+#!/bin/bash
+# build an include file to select plugins
+#
+WORKDIR=ESPEasy
+CUSTOM_H=${WORKDIR}/Custom.h
+GLOBAL_H=${WORKDIR}/ESPEasy-Globals.h
+
+[[ -L ${WORKDIR} ]] || (
+  ln -s src ${WORKDIR}
+)
+
+# we expect that ${CUSTOM_H} always contains a "#define BUILD_GIT" macro
+[[ -f ${CUSTOM_H} ]] && (
+echo "post_merge: change BUILD_GIT"
+sed -i.bak -e "s/\(#define BUILD_GIT\).*/\1 \"$(git log -1 --pretty=format:%h HEAD)\"/" ${CUSTOM_H}
+)
+
+# uncomment if you don't want to use the Custom.h include
+grep -q "^#define USE_CUSTOM_H" ${GLOBAL_H} || (
+sed -i -e "/[ \t]*#define ESPEASY_GLOBALS_H_/a #define USE_CUSTOM_H" ${GLOBAL_H}
+)

lib/AM2320/AM2320.cpp

@@ -1,25 +1,25 @@
 #include "AM2320.h"
 #include <Wire.h>
-// 
+//
 // AM2321 Temperature & Humidity Sensor library for Arduino
 // Сделана Тимофеевым Е.Н. из AM2320-master
 
-unsigned int CRC16(byte *ptr, byte length) 
-{ 
-      unsigned int crc = 0xFFFF; 
-      uint8_t s = 0x00; 
+unsigned int CRC16(byte *ptr, byte length)
+{
+      unsigned int crc = 0xFFFF;
+      uint8_t s = 0x00;
 
       while(length--) {
-        crc ^= *ptr++; 
+        crc ^= *ptr++;
         for(s = 0; s < 8; s++) {
           if((crc & 0x01) != 0) {
-            crc >>= 1; 
-            crc ^= 0xA001; 
-          } else crc >>= 1; 
-        } 
-      } 
-      return crc; 
-} 
+            crc >>= 1;
+            crc ^= 0xA001;
+          } else crc >>= 1;
+        }
+      }
+      return crc;
+}
 
 AM2320::AM2320()
 {
@@ -28,7 +28,7 @@ AM2320::AM2320()
 int AM2320::Read()
 {
 	byte buf[8];
-	for(int s = 0; s < 8; s++) buf[s] = 0x00; 
+	for(int s = 0; s < 8; s++) buf[s] = 0x00;
 
 	Wire.beginTransmission(AM2320_address);
 	Wire.endTransmission();
@@ -37,10 +37,10 @@ int AM2320::Read()
 	Wire.write(0x03);// запрос
 	Wire.write(0x00); // с 0-го адреса
 	Wire.write(0x04); // 4 байта
-	if (Wire.endTransmission(1) != 0) return 1;
+	if (Wire.endTransmission(true) != 0) return 1;
 	delayMicroseconds(1600); //>1.5ms
 	// считываем результаты запроса
-	Wire.requestFrom(AM2320_address, 0x08); 
+	Wire.requestFrom(AM2320_address, 0x08);
 	for (int i = 0; i < 0x08; i++) buf[i] = Wire.read();
 
 	// CRC check

lib/AS_BH1750/AS_BH1750.cpp

@@ -1,24 +1,24 @@
 /*
  This is a (Arduino) library for the BH1750FVI Digital Light Sensor.
- 
+
  Description:
  http://www.rohm.com/web/global/products/-/product/BH1750FVI
- 
+
  Datasheet:
  http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1750fvi-e.pdf
- 
+
  Copyright (c) 2013 Alexander Schulz.  All right reserved.
- 
+
  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
  License as published by the Free Software Foundation; either
  version 2.1 of the License, or (at your option) any later version.
- 
+
  This library is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the GNU
  Lesser General Public License for more details.
- 
+
  You should have received a copy of the GNU Lesser General Public
  License along with this library; if not, write to the Free Software
  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA	 02110-1301	 USA
@@ -31,10 +31,10 @@
 
 /**
  * Constructor.
- * Erlaubt die I2C-Adresse des Sensors zu ändern. 
- * Standardadresse: 0x23, Alternativadresse: 0x5C. 
+ * Erlaubt die I2C-Adresse des Sensors zu ändern.
+ * Standardadresse: 0x23, Alternativadresse: 0x5C.
  * Es sind entsprechende Konstanten definiert: BH1750_DEFAULT_I2CADDR  und BH1750_SECOND_I2CADDR.
- * Bei Nichtangabe wird die Standardadresse verwendet. 
+ * Bei Nichtangabe wird die Standardadresse verwendet.
  * Um die Alternativadresse zu nutzen, muss der Sensorpin 'ADR' des Chips auf VCC gelegt werden.
  */
 AS_BH1750::AS_BH1750(uint8_t address) {
@@ -44,23 +44,23 @@ AS_BH1750::AS_BH1750(uint8_t address) {
 
 /**
  * Führt die anfängliche Initialisierung des Sensors.
- * Mögliche Parameter: 
+ * Mögliche Parameter:
  *  - Modus für die Sensorauflösung:
  *    -- RESOLUTION_LOW:         Physische Sensormodus mit 4 lx Auflösung. Messzeit ca. 16ms. Bereich 0-54612.
  *    -- RESOLUTION_NORMAL:      Physische Sensormodus mit 1 lx Auflösung. Messzeit ca. 120ms. Bereich 0-54612.
  *    -- RESOLUTION_HIGH:        Physische Sensormodus mit 0,5 lx Auflösung. Messzeit ca. 120ms. Bereich 0-54612.
  *                               (Die Messbereiche können durch Änderung des MTreg verschoben werden.)
- *    -- RESOLUTION_AUTO_HIGH:   Die Werte im MTreg werden je nach Helligkeit automatisch so angepasst, 
+ *    -- RESOLUTION_AUTO_HIGH:   Die Werte im MTreg werden je nach Helligkeit automatisch so angepasst,
  *                               dass eine maximalmögliche Auflösung und Messbereich erziehlt werden.
  *                               Die messbaren Werte fangen von 0,11 lx und gehen bis über 100000 lx.
- *                               (ich weis nicht, wie genau die Werte in Grenzbereichen sind, 
+ *                               (ich weis nicht, wie genau die Werte in Grenzbereichen sind,
  *                               besonders bei hohen Werte habe ich da meine Zweifel.
  *                               Die Werte scheinen jedoch weitgehend linear mit der steigenden Helligkeit zu wachsen.)
  *                               Auflösung im Unteren Bereich ca. 0,13 lx, im mittleren 0,5 lx, im oberen etwa 1-2 lx.
- *                               Die Messzeiten verlängern sich durch mehrfache Messungen und 
+ *                               Die Messzeiten verlängern sich durch mehrfache Messungen und
  *                               die Änderungen von Measurement Time (MTreg) bis max. ca. 500 ms.
- *   
- * - AutoPowerDown: true = Der Sensor wird nach der Messung in den Stromsparmodus versetzt. 
+ *
+ * - AutoPowerDown: true = Der Sensor wird nach der Messung in den Stromsparmodus versetzt.
  *   Das spätere Aufwecken wird ggf. automatisch vorgenommen, braucht jedoch geringfügig mehr Zeit.
  *
  * Defaultwerte: RESOLUTION_AUTO_HIGH, true
@@ -73,8 +73,8 @@ bool AS_BH1750::begin(sensors_resolution_t mode, bool autoPowerDown) {
 #endif
   _virtualMode = mode;
   _autoPowerDown = autoPowerDown;
-  
-  Wire.begin();
+
+  //Wire.begin();   called in ESPEasy framework
 
   defineMTReg(BH1750_MTREG_DEFAULT); // eigentlich normalerweise unnötig, da standard
 
@@ -132,7 +132,7 @@ bool AS_BH1750::isPresent() {
   // Check I2C Adresse
   Wire.beginTransmission(_address);
   if(Wire.endTransmission()!=0) {
-    return false; 
+    return false;
   }
 
   // Check device: ist es ein BH1750
@@ -141,10 +141,10 @@ bool AS_BH1750::isPresent() {
     //write8(BH1750_POWER_ON);
     selectResolutionMode(BH1750_ONE_TIME_LOW_RES_MODE);
     _hardwareMode=255;
-  } 
+  }
   else {
     // falls einmal-modus aktiv war, muss der Sensor geweckt werden
-    powerOn(); 
+    powerOn();
   }
 
   // Prüfen, ob Werte auch wirklich geliefert werden (letztes Modus, ggf. wird auto-PowerDown ausgeführt)
@@ -189,9 +189,9 @@ void AS_BH1750::powerDown() {
  * Sendet zum Sensor ein Befehl zum Auswahl von HardwareMode.
  *
  * Parameter:
- * - mode: s.o. 
+ * - mode: s.o.
  * - DelayFuncPtr: delay(n) Möglichkeit, eigene Delay-Funktion mitzugeben (z.B. um sleep-Modus zu verwenden).
- * 
+ *
  * Defaultwerte: delay()
  *
  */
@@ -256,17 +256,17 @@ float AS_BH1750::readLightLevel(DelayFuncPtr fDelayPtr) {
     return -1;
   }
 
-  // ggf. PowerOn  
+  // ggf. PowerOn
   if(_autoPowerDown && _valueReaded){
     powerOn();
   }
 
   // Das Automatische Modus benötigt eine Sonderbehandlung.
-  // Zuerst wird die Helligkeit im LowRes-Modus gelesen, 
+  // Zuerst wird die Helligkeit im LowRes-Modus gelesen,
   // je nach Bereich (dunkel, normal, sehr hell) werden die Werte von MTreg gesetzt und
   // danach wird die eigentliche Messung vorgenommen.
   /*
-     Die feste Grenzwerte verursachen möglicherweise einen 'Sprung' in der Messkurve. 
+     Die feste Grenzwerte verursachen möglicherweise einen 'Sprung' in der Messkurve.
    In diesem Fall wäre eine laufende Anpassung von MTreg in Grenzbereichen vermutlich besser.
    Für meine Zwecke ist das jedoch ohne Bedeutung.
    */
@@ -282,8 +282,8 @@ float AS_BH1750::readLightLevel(DelayFuncPtr fDelayPtr) {
     if(level<10) {
 #if BH1750_DEBUG == 1
     Serial.println("level 0: dark");
-#endif    
-      // Dunkel, Empfindlichkeit auf Maximum. 
+#endif
+      // Dunkel, Empfindlichkeit auf Maximum.
       // Der Wert ist zufällig. Ab ca. 16000 wäre diese Vorgehnsweise möglich.
       // Ich brauche diese Genauigkeit aber nur in den ganz dunklen Bereichen (zu erkennen, wann wirklich 'dunkel' ist).
       defineMTReg(BH1750_MTREG_MAX);
@@ -294,16 +294,16 @@ float AS_BH1750::readLightLevel(DelayFuncPtr fDelayPtr) {
     else if(level<32767) {
 #if BH1750_DEBUG == 1
     Serial.println("level 1: normal");
-#endif    
+#endif
       // Bis hierher reicht die 0,5 lx Modus. Normale Empfindlichkeit.
       defineMTReg(BH1750_MTREG_DEFAULT);
       selectResolutionMode(_autoPowerDown?BH1750_ONE_TIME_HIGH_RES_MODE_2:BH1750_CONTINUOUS_HIGH_RES_MODE_2, fDelayPtr);
       fDelayPtr(120); // TODO: Wert prüfen
-    } 
+    }
     else if(level<60000) {
 #if BH1750_DEBUG == 1
     Serial.println("level 2: bright");
-#endif    
+#endif
       // hoher Bereich, 1 lx Modus, normale Empfindlichkeit. Der Wert von 60000 ist mehr oder weniger zufällig, es mus einfach ein hoher Wert, nah an der Grenze sein.
       defineMTReg(BH1750_MTREG_DEFAULT);
       selectResolutionMode(_autoPowerDown?BH1750_ONE_TIME_HIGH_RES_MODE:BH1750_CONTINUOUS_HIGH_RES_MODE, fDelayPtr);
@@ -312,29 +312,29 @@ float AS_BH1750::readLightLevel(DelayFuncPtr fDelayPtr) {
     else {
 #if BH1750_DEBUG == 1
     Serial.println("level 3: very bright");
-#endif    
+#endif
       // sehr hoher Bereich, Empfindlichkeit verringern
       defineMTReg(32); // Min+1, bei dem Minimum aus Doku spielt der Sensor (zumindest meiner) verrückt: Die Werte sind ca. 1/10 von den Erwarteten.
       selectResolutionMode(_autoPowerDown?BH1750_ONE_TIME_HIGH_RES_MODE:BH1750_CONTINUOUS_HIGH_RES_MODE, fDelayPtr);
       fDelayPtr(120); // TODO: Wert prüfen
     }
-  } 
+  }
 
   // Hardware Wert lesen und in Lux umrechnen.
   uint16_t raw = readRawLevel();
   if(raw==65535) {
-    // Wert verdächtig hoch. Sensor prüfen. 
+    // Wert verdächtig hoch. Sensor prüfen.
     // Check I2C Adresse
     Wire.beginTransmission(_address);
     if(Wire.endTransmission()!=0) {
-      return -1; 
+      return -1;
     }
   }
-  return convertRawValue(raw); 
+  return convertRawValue(raw);
 }
 
 /**
- * Roh-Wert der Helligkeit auslesen. 
+ * Roh-Wert der Helligkeit auslesen.
  * Wertebereich 0-65535.
  */
 uint16_t AS_BH1750::readRawLevel(void) {
@@ -457,7 +457,7 @@ void AS_BH1750::defineMTReg(uint8_t val) {
  * Gibt an, ob der Sensor initialisiert ist.
  */
 bool AS_BH1750::isInitialized() {
-  return _hardwareMode!=255; 
+  return _hardwareMode!=255;
 }
 
 /**

lib/Adafruit_MPR121/Adafruit_MPR121.cpp

@@ -20,7 +20,7 @@ Adafruit_MPR121::Adafruit_MPR121() {
 }
 
 boolean Adafruit_MPR121::begin(uint8_t i2caddr) {
-  Wire.begin();
+  //Wire.begin();   called in ESPEasy framework
 
   _i2caddr = i2caddr;
 

lib/Adafruit_Motor_Shield_V2/Adafruit_MotorShield.cpp

@@ -44,7 +44,7 @@ Adafruit_MotorShield::Adafruit_MotorShield(uint8_t addr) {
 
 void Adafruit_MotorShield::begin(uint16_t freq) {
   // init PWM w/_freq
-  WIRE.begin();
+  //Wire.begin();   called in ESPEasy framework
   _pwm.begin();
   _freq = freq;
   _pwm.setPWMFreq(_freq);  // This is the maximum PWM frequency

lib/Adafruit_Motor_Shield_V2/utility/Adafruit_MS_PWMServoDriver.cpp

@@ -1,17 +1,17 @@
-/*************************************************** 
+/***************************************************
   This is a library for our Adafruit 16-channel PWM & Servo driver
 
   Pick one up today in the adafruit shop!
   ------> http://www.adafruit.com/products/815
 
-  These displays use I2C to communicate, 2 pins are required to  
+  These displays use I2C to communicate, 2 pins are required to
   interface. For Arduino UNOs, thats SCL -> Analog 5, SDA -> Analog 4
 
-  Adafruit invests time and resources providing this open source code, 
-  please support Adafruit and open-source hardware by purchasing 
+  Adafruit invests time and resources providing this open source code,
+  please support Adafruit and open-source hardware by purchasing
   products from Adafruit!
 
-  Written by Limor Fried/Ladyada for Adafruit Industries.  
+  Written by Limor Fried/Ladyada for Adafruit Industries.
   BSD license, all text above must be included in any redistribution
  ****************************************************/
 
@@ -29,7 +29,7 @@ Adafruit_MS_PWMServoDriver::Adafruit_MS_PWMServoDriver(uint8_t addr) {
 }
 
 void Adafruit_MS_PWMServoDriver::begin(void) {
- WIRE.begin();
+ //Wire.begin();   called in ESPEasy framework
  reset();
 }
 
@@ -41,7 +41,7 @@ void Adafruit_MS_PWMServoDriver::reset(void) {
 void Adafruit_MS_PWMServoDriver::setPWMFreq(float freq) {
   //Serial.print("Attempting to set freq ");
   //Serial.println(freq);
-  
+
   freq *= 0.9;  // Correct for overshoot in the frequency setting (see issue #11).
 
   float prescaleval = 25000000;
@@ -50,8 +50,8 @@ void Adafruit_MS_PWMServoDriver::setPWMFreq(float freq) {
   prescaleval -= 1;
   //Serial.print("Estimated pre-scale: "); Serial.println(prescaleval);
   uint8_t prescale = floor(prescaleval + 0.5);
-  //Serial.print("Final pre-scale: "); Serial.println(prescale);  
-  
+  //Serial.print("Final pre-scale: "); Serial.println(prescale);
+
   uint8_t oldmode = read8(PCA9685_MODE1);
   uint8_t newmode = (oldmode&0x7F) | 0x10; // sleep
   write8(PCA9685_MODE1, newmode); // go to sleep

lib/Adafruit_TCS34725/Adafruit_TCS34725.cpp

@@ -119,7 +119,7 @@ void Adafruit_TCS34725::enable(void)
 {
   write8(TCS34725_ENABLE, TCS34725_ENABLE_PON);
   delay(3);
-  write8(TCS34725_ENABLE, TCS34725_ENABLE_PON | TCS34725_ENABLE_AEN);  
+  write8(TCS34725_ENABLE, TCS34725_ENABLE_PON | TCS34725_ENABLE_AEN);
 }
 
 /**************************************************************************/
@@ -144,7 +144,7 @@ void Adafruit_TCS34725::disable(void)
     Constructor
 */
 /**************************************************************************/
-Adafruit_TCS34725::Adafruit_TCS34725(tcs34725IntegrationTime_t it, tcs34725Gain_t gain) 
+Adafruit_TCS34725::Adafruit_TCS34725(tcs34725IntegrationTime_t it, tcs34725Gain_t gain)
 {
   _tcs34725Initialised = false;
   _tcs34725IntegrationTime = it;
@@ -161,10 +161,10 @@ Adafruit_TCS34725::Adafruit_TCS34725(tcs34725IntegrationTime_t it, tcs34725Gain_
     doing anything else)
 */
 /**************************************************************************/
-boolean Adafruit_TCS34725::begin(void) 
+boolean Adafruit_TCS34725::begin(void)
 {
-  Wire.begin();
-  
+  //Wire.begin();   called in ESPEasy framework
+
   /* Make sure we're actually connected */
   uint8_t x = read8(TCS34725_ID);
   if ((x != 0x44) && (x != 0x10))
@@ -182,7 +182,7 @@ boolean Adafruit_TCS34725::begin(void)
 
   return true;
 }
-  
+
 /**************************************************************************/
 /*!
     Sets the integration time for the TC34725
@@ -228,7 +228,7 @@ void Adafruit_TCS34725::getRawData (uint16_t *r, uint16_t *g, uint16_t *b, uint1
   *r = read16(TCS34725_RDATAL);
   *g = read16(TCS34725_GDATAL);
   *b = read16(TCS34725_BDATAL);
-  
+
   /* Set a delay for the integration time */
   switch (_tcs34725IntegrationTime)
   {

lib/Adafruit_TCS34725/examples/tcs34725autorange/tcs34725autorange.ino

@@ -163,7 +163,7 @@ void loop(void) {
   Serial.print(rgb_sensor.atime_ms); 
   Serial.print(F("ms (0x")); 
   Serial.print(rgb_sensor.atime, HEX);   
-  Serial.println(F(")"));
+  Serial.println(")");
   
   Serial.print(F("Raw R:")); 
   Serial.print(rgb_sensor.r); 
@@ -182,7 +182,7 @@ void loop(void) {
   Serial.print(rgb_sensor.saturation); 
   Serial.print(F(" Sat75:"));
   Serial.print(rgb_sensor.saturation75); 
-  Serial.print(F(" "));
+  Serial.print(" ");
   Serial.println(rgb_sensor.isSaturated ? "*SATURATED*" : "");
 
   Serial.print(F("CPL:")); 

lib/Adafruit_TSL2591/Adafruit_TSL2591.cpp

@@ -68,7 +68,7 @@ Adafruit_TSL2591::Adafruit_TSL2591(int32_t sensorID)
 
 boolean Adafruit_TSL2591::begin(void)
 {
-  Wire.begin();
+  //Wire.begin();   called in ESPEasy framework
 
   /*
   for (uint8_t i=0; i<0x20; i++)

lib/Adafruit_TSL2591/examples/tsl2591/tsl2591.ino

@@ -33,7 +33,7 @@ void displaySensorDetails(void)
   Serial.print  (F("Min Value:    ")); Serial.print(sensor.min_value); Serial.println(F(" lux"));
   Serial.print  (F("Resolution:   ")); Serial.print(sensor.resolution); Serial.println(F(" lux"));  
   Serial.println(F("------------------------------------"));
-  Serial.println(F(""));
+  Serial.println("");
   delay(500);
 }
 
@@ -81,7 +81,7 @@ void configureSensor(void)
   Serial.print((tsl.getTiming() + 1) * 100, DEC); 
   Serial.println(F(" ms"));
   Serial.println(F("------------------------------------"));
-  Serial.println(F(""));
+  Serial.println("");
 }
 
 

lib/ArduinoJson/.github/ISSUE_TEMPLATE.md

@@ -1,11 +1,14 @@
 <!--
-Thanks for using ArduinoJson :-)
+Before opening an issue, please read the FAQ:
+https://arduinojson.org/faq/
 
-Before opening an issue, please make sure you've read these:
-https://github.com/bblanchon/ArduinoJson/wiki/FAQ
-https://github.com/bblanchon/ArduinoJson/wiki/Avoiding-pitfalls
+Please provide all the relevant information:
+* good title
+* short description of the problem
+* target platform
+* compiler model and version
+* MVCE (https://stackoverflow.com/help/mcve)
+* compiler output
 
-Next, make sure you provide all the relevant information: platform, code snippet, and error messages.
-
-Please be concise!
--->
+Good questions get fast answers!
+-->

lib/ArduinoJson/.gitignore

@@ -6,3 +6,6 @@
 /sftp-config.json
 .tags
 .tags_sorted_by_file
+/fuzzing/*_fuzzer
+/fuzzing/*_fuzzer.options
+/fuzzing/*_fuzzer_seed_corpus.zip

lib/ArduinoJson/.mbedignore

@@ -0,0 +1,6 @@
+.github/
+examples/
+fuzzing/
+scripts/
+test/
+third-party/

lib/ArduinoJson/.travis.yml

@@ -7,111 +7,119 @@ matrix:
         apt:
           sources: ['ubuntu-toolchain-r-test']
           packages: ['g++-4.4']
-      env: SCRIPT=cmake CMAKE_CXX_COMPILER=g++-4.4
-    - compiler: gcc
-      addons:
-        apt:
-          sources: ['ubuntu-toolchain-r-test']
-          packages: ['g++-4.5']
-      env: SCRIPT=cmake CMAKE_CXX_COMPILER=g++-4.5
+      env: SCRIPT=cmake GCC=4.4
     - compiler: gcc
       addons:
         apt:
           sources: ['ubuntu-toolchain-r-test']
           packages: ['g++-4.6']
-      env: SCRIPT=cmake CMAKE_CXX_COMPILER=g++-4.6
+      env: SCRIPT=cmake GCC=4.6
     - compiler: gcc
       addons:
         apt:
           sources: ['ubuntu-toolchain-r-test']
           packages: ['g++-4.7']
-      env: SCRIPT=cmake CMAKE_CXX_COMPILER=g++-4.7
+      env: SCRIPT=cmake GCC=4.7
     - compiler: gcc
       addons:
         apt:
           sources: ['ubuntu-toolchain-r-test']
           packages: ['g++-4.8']
-      env: SCRIPT=cmake CMAKE_CXX_COMPILER=g++-4.8
+      env: SCRIPT=cmake GCC=4.8 SANITIZE=address
     - compiler: gcc
       addons:
         apt:
           sources: ['ubuntu-toolchain-r-test']
           packages: ['g++-4.9']
-      env: SCRIPT=cmake CMAKE_CXX_COMPILER=g++-4.9
+      env: SCRIPT=cmake GCC=4.9 SANITIZE=leak
     - compiler: gcc
       addons:
         apt:
           sources: ['ubuntu-toolchain-r-test']
           packages: ['g++-5']
-      env: SCRIPT=cmake CMAKE_CXX_COMPILER=g++-5
+      env: SCRIPT=cmake GCC=5
+    - compiler: gcc
+      addons:
+        apt:
+          sources: ['ubuntu-toolchain-r-test']
+          packages: ['g++-6']
+      env: SCRIPT=cmake GCC=6
+    - compiler: gcc
+      addons:
+        apt:
+          sources: ['ubuntu-toolchain-r-test']
+          packages: ['g++-7']
+      env: SCRIPT=cmake GCC=7
     - compiler: clang
-      env: SCRIPT=cmake CMAKE_CXX_COMPILER=clang++
+      env: SCRIPT=cmake
     - compiler: clang
       addons:
         apt:
           sources: ['ubuntu-toolchain-r-test','llvm-toolchain-precise-3.5']
           packages: ['clang-3.5']
-      env: SCRIPT=cmake CMAKE_CXX_COMPILER=clang++-3.5
+      env: SCRIPT=cmake CLANG=3.5 SANITIZE=address
     - compiler: clang
       addons:
         apt:
           sources: ['ubuntu-toolchain-r-test','llvm-toolchain-precise-3.6']
           packages: ['clang-3.6']
-      env: SCRIPT=cmake CMAKE_CXX_COMPILER=clang++-3.6
+      env: SCRIPT=cmake CLANG=3.6 SANITIZE=leak
     - compiler: clang
       addons:
         apt:
           sources: ['ubuntu-toolchain-r-test','llvm-toolchain-precise-3.7']
           packages: ['clang-3.7']
-      env: SCRIPT=cmake CMAKE_CXX_COMPILER=clang++-3.7
+      env: SCRIPT=cmake CLANG=3.7
     - compiler: clang
       addons:
         apt:
           sources: ['ubuntu-toolchain-r-test','llvm-toolchain-precise-3.8']
           packages: ['clang-3.8']
-      env: SCRIPT=cmake CMAKE_CXX_COMPILER=clang++-3.8
+      env: SCRIPT=cmake CLANG=3.8 SANITIZE=undefined
+    - compiler: clang
+      addons:
+        apt:
+          sources: ['ubuntu-toolchain-r-test','llvm-toolchain-trusty-3.9']
+          packages: ['clang-3.9']
+      env: SCRIPT=cmake CLANG=3.9
+    - compiler: clang
+      addons:
+        apt:
+          sources: ['ubuntu-toolchain-r-test','llvm-toolchain-trusty-4.0']
+          packages: ['clang-4.0']
+      env: SCRIPT=cmake CLANG=4.0
+    - compiler: clang
+      addons:
+        apt:
+          sources: ['ubuntu-toolchain-r-test','llvm-toolchain-trusty-5.0']
+          packages: ['clang-5.0']
+      env: SCRIPT=cmake CLANG=5.0
+    - compiler: clang
+      addons:
+        apt:
+          sources: ['ubuntu-toolchain-r-test','llvm-toolchain-trusty-6.0']
+          packages: ['clang-6.0']
+      env: SCRIPT=cmake CLANG=6.0
     - compiler: gcc
       env: SCRIPT=coverage
-    - os: osx
-      osx_image: beta-xcode6.1
-      compiler: clang
-      env: SCRIPT=cmake-osx
-    - os: osx
-      osx_image: beta-xcode6.2
-      compiler: clang
-      env: SCRIPT=cmake-osx
-    - os: osx
-      osx_image: beta-xcode6.3
-      compiler: clang
-      env: SCRIPT=cmake-osx
     - os: osx
       osx_image: xcode6.4
       compiler: clang
-      env: SCRIPT=cmake-osx
-    - os: osx
-      osx_image: xcode7
-      compiler: clang
-      env: SCRIPT=cmake-osx
-    - os: osx
-      osx_image: xcode7.1
-      compiler: clang
-      env: SCRIPT=cmake-osx
-    - os: osx
-      osx_image: xcode7.2
-      compiler: clang
-      env: SCRIPT=cmake-osx
+      env: SCRIPT=cmake
     - os: osx
       osx_image: xcode7.3
       compiler: clang
-      env: SCRIPT=cmake-osx
-    - env: SCRIPT=arduino VERSION=1.5.8 BOARD=arduino:avr:uno
+      env: SCRIPT=cmake SANITIZE=address
     - env: SCRIPT=arduino VERSION=1.6.7 BOARD=arduino:avr:uno
-    - env: SCRIPT=arduino VERSION=1.6.8 BOARD=arduino:avr:uno
-    - env: SCRIPT=arduino VERSION=1.6.9 BOARD=arduino:avr:uno
+    - env: SCRIPT=arduino VERSION=1.8.2 BOARD=arduino:avr:uno
     - env: SCRIPT=platformio BOARD=uno
-    - env: SCRIPT=platformio BOARD=due
     - env: SCRIPT=platformio BOARD=esp01
-    - env: SCRIPT=platformio BOARD=teensy31
+    - compiler: clang
+      addons:
+        apt:
+          sources: ['ubuntu-toolchain-r-test','llvm-toolchain-trusty-6.0']
+          packages: ['clang-6.0','llvm-6.0']
+      env: SCRIPT=fuzz CLANG=6.0
 cache:
   directories:
     - "~/.platformio"

lib/ArduinoJson/ArduinoJson.h

@@ -1,8 +1,5 @@
-// Copyright Benoit Blanchon 2014-2016
+// ArduinoJson - arduinojson.org
+// Copyright Benoit Blanchon 2014-2018
 // MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
 
-#include "include/ArduinoJson.h"
+#include "src/ArduinoJson.h"

lib/ArduinoJson/CHANGELOG.md

@@ -1,6 +1,270 @@
 ArduinoJson: change log
 =======================
 
+v5.13.2
+-------
+
+* Fixed `JsonBuffer::parse()` not respecting nesting limit correctly (issue #693)
+* Fixed inconsistencies in nesting level counting (PR #695 from Zhenyu Wu)
+* Fixed null values that could be pass to `strcmp()` (PR #745 from Mike Karlesky)
+* Added macros `ARDUINOJSON_VERSION`, `ARDUINOJSON_VERSION_MAJOR`...
+
+v5.13.1
+-------
+
+* Fixed `JsonVariant::operator|(int)` that returned the default value if the variant contained a double (issue #675)
+* Allowed non-quoted key to contain underscores (issue #665)
+
+v5.13.0
+-------
+
+* Changed the rules of string duplication (issue #658)
+* `RawJson()` accepts any kind of string and obeys to the same rules for duplication
+* Changed the return type of `strdup()` to `const char*` to prevent double duplication
+* Marked `strdup()` as deprecated
+
+> ### New rules for string duplication
+>
+> | type                       | duplication |
+> |:---------------------------|:------------|
+> | const char*                | no          |
+> | char*                      | ~~no~~ yes  |
+> | String                     | yes         |
+> | std::string                | yes         |
+> | const __FlashStringHelper* | yes         |
+>
+> These new rules make `JsonBuffer::strdup()` useless.
+
+v5.12.0
+-------
+
+* Added `JsonVariant::operator|` to return a default value (see below)
+* Added a clear error message when compiled as C instead of C++ (issue #629)
+* Added detection of MPLAB XC compiler (issue #629)
+* Added detection of Keil ARM Compiler (issue #629)
+* Added an example that shows how to save and load a configuration file
+* Reworked all other examples
+
+> ### How to use the new feature?
+>
+> If you have a block like this:
+>
+> ```c++
+> const char* ssid = root["ssid"];
+> if (!ssid)
+>   ssid = "default ssid";
+> ```
+>
+> You can simplify like that:
+>
+> ```c++
+> const char* ssid = root["ssid"] | "default ssid";
+> ```
+
+v5.11.2
+-------
+
+* Fixed `DynamicJsonBuffer::clear()` not resetting allocation size (issue #561)
+* Fixed incorrect rounding for float values (issue #588)
+
+v5.11.1
+-------
+
+* Removed dependency on `PGM_P` as Particle 0.6.2 doesn't define it (issue #546)
+* Fixed warning "dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]"
+* Fixed warning "floating constant exceeds range of 'float' [-Woverflow]" (issue #544)
+* Fixed warning "this statement may fall through" [-Wimplicit-fallthrough=] (issue #539)
+* Removed `ARDUINOJSON_DOUBLE_IS_64BITS` as it became useless.
+* Fixed too many decimals places in float serialization (issue #543)
+
+v5.11.0
+-------
+
+* Made `JsonBuffer` non-copyable (PR #524 by @luisrayas3)
+* Added `StaticJsonBuffer::clear()`
+* Added `DynamicJsonBuffer::clear()`
+
+v5.10.1
+-------
+
+* Fixed IntelliSense errors in Visual Micro (issue #483)
+* Fixed compilation in IAR Embedded Workbench (issue #515)
+* Fixed reading "true" as a float (issue #516)
+* Added `ARDUINOJSON_DOUBLE_IS_64BITS`
+* Added `ARDUINOJSON_EMBEDDED_MODE`
+
+v5.10.0
+-------
+
+* Removed configurable number of decimal places (issues #288, #427 and #506)
+* Changed exponentiation thresholds to `1e7` and `1e-5` (issues #288, #427 and #506)
+* `JsonVariant::is<double>()` now returns `true` for integers
+* Fixed error `IsBaseOf is not a member of ArduinoJson::TypeTraits` (issue #495)
+* Fixed error `forming reference to reference` (issue #495)
+
+> ### BREAKING CHANGES :warning:
+>
+> | Old syntax                      | New syntax          |
+> |:--------------------------------|:--------------------|
+> | `double_with_n_digits(3.14, 2)` | `3.14`              |
+> | `float_with_n_digits(3.14, 2)`  | `3.14f`             |
+> | `obj.set("key", 3.14, 2)`       | `obj["key"] = 3.14` |
+> | `arr.add(3.14, 2)`              | `arr.add(3.14)`     |
+>
+> | Input     | Old output | New output |
+> |:----------|:-----------|:-----------|
+> | `3.14159` | `3.14`     | `3.14159`  |
+> | `42.0`    | `42.00`    | `42`       |
+> | `0.0`     | `0.00`     | `0`        |
+>
+> | Expression                     | Old result | New result |
+> |:-------------------------------|:-----------|:-----------|
+> | `JsonVariant(42).is<int>()`    | `true`     | `true`     |
+> | `JsonVariant(42).is<float>()`  | `false`    | `true`     |
+> | `JsonVariant(42).is<double>()` | `false`    | `true`     |
+
+v5.9.0
+------
+
+* Added `JsonArray::remove(iterator)` (issue #479)
+* Added `JsonObject::remove(iterator)`
+* Renamed `JsonArray::removeAt(size_t)` into `remove(size_t)`
+* Renamed folder `include/` to `src/`
+* Fixed warnings `floating constant exceeds range of float`and `floating constant truncated to zero` (issue #483)
+* Removed `Print` class and converted `printTo()` to a template method (issue #276)
+* Removed example `IndentedPrintExample.ino`
+* Now compatible with Particle 0.6.1, thanks to Jacob Nite (issue #294 and PR #461 by @foodbag)
+
+v5.8.4
+------
+
+* Added custom implementation of `strtod()` (issue #453)
+* Added custom implementation of `strtol()` (issue #465)
+* `char` is now treated as an integral type (issue #337, #370)
+
+v5.8.3
+------
+
+* Fixed an access violation in `DynamicJsonBuffer` when memory allocation fails (issue #433)
+* Added operators `==` and `!=` for two `JsonVariant`s (issue #436)
+* Fixed `JsonVariant::operator[const FlashStringHelper*]` (issue #441)
+
+v5.8.2
+------
+
+* Fixed parsing of comments (issue #421)
+* Fixed ignored `Stream` timeout (issue #422)
+* Made sure we don't read more that necessary (issue #422)
+* Fixed error when the key of a `JsonObject` is a `char[]` (issue #423)
+* Reduced code size when using `const` references
+* Fixed error with string of type `unsigned char*` (issue #428)
+* Added `deprecated` attribute on `asArray()`, `asObject()` and `asString()` (issue #420)
+
+v5.8.1
+------
+
+* Fixed error when assigning a `volatile int` to a `JsonVariant` (issue #415)
+* Fixed errors with Variable Length Arrays (issue #416)
+* Fixed error when both `ARDUINOJSON_ENABLE_STD_STREAM` and `ARDUINOJSON_ENABLE_ARDUINO_STREAM` are set to `1`
+* Fixed error "Stream does not name a type" (issue #412)
+
+v5.8.0
+------
+
+* Added operator `==` to compare `JsonVariant` and strings (issue #402)
+* Added support for `Stream` (issue #300)
+* Reduced memory consumption by not duplicating spaces and comments
+
+> ### BREAKING CHANGES :warning:
+>
+> `JsonBuffer::parseObject()` and  `JsonBuffer::parseArray()` have been pulled down to the derived classes `DynamicJsonBuffer` and `StaticJsonBufferBase`.
+>
+> This means that if you have code like:
+>
+> ```c++
+> void myFunction(JsonBuffer& jsonBuffer);
+> ```
+>
+> you need to replace it with one of the following:
+>
+> ```c++
+> void myFunction(DynamicJsonBuffer& jsonBuffer);
+> void myFunction(StaticJsonBufferBase& jsonBuffer);
+> template<typename TJsonBuffer> void myFunction(TJsonBuffer& jsonBuffer);
+> ```
+
+v5.7.3
+------
+
+* Added an `printTo(char[N])` and `prettyPrintTo(char[N])` (issue #292)
+* Added ability to set a nested value like this: `root["A"]["B"] = "C"` (issue #352)
+* Renamed `*.ipp` to `*Impl.hpp` because they were ignored by Arduino IDE (issue #396)
+
+v5.7.2
+------
+
+* Made PROGMEM available on more platforms (issue #381)
+* Fixed PROGMEM causing an exception on ESP8266 (issue #383)
+
+v5.7.1
+------
+
+* Added support for PROGMEM (issue #76)
+* Fixed compilation error when index is not an `int` (issue #381)
+
+v5.7.0
+------
+
+* Templatized all functions using `String` or `std::string`
+* Removed `ArduinoJson::String`
+* Removed `JsonVariant::defaultValue<T>()`
+* Removed non-template `JsonObject::get()` and `JsonArray.get()`
+* Fixed support for `StringSumHelper` (issue #184)
+* Replaced `ARDUINOJSON_USE_ARDUINO_STRING` by `ARDUINOJSON_ENABLE_STD_STRING` and `ARDUINOJSON_ENABLE_ARDUINO_STRING` (issue #378)
+* Added example `StringExample.ino` to show where `String` can be used
+* Increased default nesting limit to 50 when compiled for a computer (issue #349)
+
+> ### BREAKING CHANGES :warning:
+>
+> The non-template functions `JsonObject::get()` and `JsonArray.get()` have been removed. This means that you need to explicitely tell the type you expect in return.
+>
+> Old code:
+>
+> ```c++
+> #define ARDUINOJSON_USE_ARDUINO_STRING 0
+> JsonVariant value1 = myObject.get("myKey");
+> JsonVariant value2 = myArray.get(0);
+> ```
+>
+> New code:
+>
+> ```c++
+> #define ARDUINOJSON_ENABLE_ARDUINO_STRING 0
+> #define ARDUINOJSON_ENABLE_STD_STRING 1
+> JsonVariant value1 = myObject.get<JsonVariant>("myKey");
+> JsonVariant value2 = myArray.get<JsonVariant>(0);
+> ```
+
+v5.6.7
+------
+
+* Fixed `array[idx].as<JsonVariant>()` and `object[key].as<JsonVariant>()`
+* Fixed return value of `JsonObject::set()` (issue #350)
+* Fixed undefined behavior in `Prettyfier` and `Print` (issue #354)
+* Fixed parser that incorrectly rejected floats containing a `+` (issue #349)
+
+v5.6.6
+------
+
+* Fixed `-Wparentheses` warning introduced in v5.6.5 (PR #335 by @nuket)
+* Added `.mbedignore` for ARM mbdeb (PR #334 by @nuket)
+* Fixed  `JsonVariant::success()` which didn't propagate `JsonArray::success()` nor `JsonObject::success()` (issue #342).
+
+v5.6.5
+------
+
+* `as<char*>()` now returns `true` when input is `null` (issue #330)
+
 v5.6.4
 ------
 
@@ -71,8 +335,9 @@ v5.1.0
 * Added support of `long long` (issue #171)
 * Moved all build settings to `ArduinoJson/Configuration.hpp`
 
-**BREAKING CHANGE**:
-If you defined `ARDUINOJSON_ENABLE_STD_STREAM`, you now need to define it to `1`.
+> ### BREAKING CHANGE :warning:
+>
+> If you defined `ARDUINOJSON_ENABLE_STD_STREAM`, you now need to define it to `1`.
 
 v5.0.8
 ------
@@ -86,9 +351,10 @@ v5.0.7
 * Made library easier to use from a CMake project: simply `add_subdirectory(ArduinoJson/src)`
 * Changed `String` to be a `typedef` of `std::string` (issues #142 and #161)
 
-**BREAKING CHANGES**:
-- `JsonVariant(true).as<String>()` now returns `"true"` instead of `"1"`
-- `JsonVariant(false).as<String>()` now returns `"false"` instead of `"0"`
+> ### BREAKING CHANGES :warning:
+>
+> - `JsonVariant(true).as<String>()` now returns `"true"` instead of `"1"`
+> - `JsonVariant(false).as<String>()` now returns `"false"` instead of `"0"`
 
 v5.0.6
 ------
@@ -142,10 +408,11 @@ v5.0.0
 * Redesigned `JsonVariant` to leverage converting constructors instead of assignment operators (issue #66)
 * Switched to new the library layout (requires Arduino 1.0.6 or above)
 
-**BREAKING CHANGES**:
-- `JsonObject::add()` was renamed to `set()`
-- `JsonArray::at()` and `JsonObject::at()` were renamed to `get()`
-- Number of digits of floating point value are now set with `double_with_n_digits()`
+> ### BREAKING CHANGES :warning:
+>
+> - `JsonObject::add()` was renamed to `set()`
+> - `JsonArray::at()` and `JsonObject::at()` were renamed to `get()`
+> - Number of digits of floating point value are now set with `double_with_n_digits()`
 
 **Personal note about the `String` class**:
 Support of the `String` class has been added to the library because many people use it in their programs.
@@ -198,106 +465,7 @@ v4.0
 * Unified parser and generator API (issue #23)
 * Updated library layout, now requires Arduino 1.0.6 or newer
 
-**BREAKING CHANGE**: API changed significantly, see [Migrating code to the new API](https://github.com/bblanchon/ArduinoJson/wiki/Migrating-code-to-the-new-API).
+> ### BREAKING CHANGES :warning:
+>
+> API changed significantly since v3, see [Migrating code to the new API](https://arduinojson.org/doc/migration/).
 
-
-v3.4
-----
-
-* Fixed escaped char parsing (issue #16)
-
-
-v3.3
-----
-
-* Added indented output for the JSON generator (issue #11), see example bellow.
-* Added `IndentedPrint`, a decorator for `Print` to allow indented output
-
-Example:
-
-    JsonOject<2> json;
-    json["key"] = "value";
-    json.prettyPrintTo(Serial);
-
-v3.2
-----
-
-* Fixed a bug when adding nested object in `JsonArray` (bug introduced in v3.1).
-
-v3.1
-----
-
-* Calling `Generator::JsonObject::add()` twice with the same `key` now replaces the `value`
-* Added `Generator::JsonObject::operator[]`, see bellow the new API
-* Added `Generator::JsonObject::remove()` (issue #9)
-
-Old generator API:
-
-	JsonObject<3> root;
-    root.add("sensor", "gps");
-    root.add("time", 1351824120);
-    root.add("data", array);
-
-New generator API:
-
-	JsonObject<3> root;
-    root["sensor"] = "gps";
-    root["time"] = 1351824120;
-    root["data"] = array;
-
-v3.0
-----
-
-* New parser API, see bellow
-* Renamed `JsonHashTable` into `JsonObject`
-* Added iterators for `JsonArray` and `JsonObject` (issue #4)
-
-Old parser API:
-
-    JsonHashTable root = parser.parseHashTable(json);
-
-	char*  sensor    = root.getString("sensor");
-	long   time      = root.getLong("time");
-	double latitude  = root.getArray("data").getDouble(0);
-    double longitude = root.getArray("data").getDouble(1);
-
-New parser API:
-
-	JsonObject root = parser.parse(json);
-
-	char*  sensor    = root["sensor"];
-    long   time      = root["time"];
-    double latitude  = root["data"][0];
-    double longitude = root["data"][1];
-
-v2.1
-----
-
-* Fixed case `#include "jsmn.cpp"` which caused an error in Linux (issue #6)
-* Fixed a buffer overrun in JSON Parser (issue #5)
-
-v2.0
-----
-
-* Added JSON encoding (issue #2)
-* Renamed the library `ArduinoJsonParser` becomes `ArduinoJson`
-
-**Breaking change**: you need to add the following line at the top of your program.
-
-	using namespace ArduinoJson::Parser;
-
-v1.2
-----
-
-* Fixed error in JSON parser example (issue #1)
-
-v1.1
-----
-
-* Example: changed `char* json` into `char[] json` so that the bytes are not write protected
-* Fixed parsing bug when the JSON contains multi-dimensional arrays
-
-v1.0
-----
-
-Initial release

lib/ArduinoJson/CMakeLists.txt

@@ -1,21 +1,16 @@
-# Copyright Benoit Blanchon 2014-2016
+# ArduinoJson - arduinojson.org
+# Copyright Benoit Blanchon 2014-2018
 # MIT License
-# 
-# Arduino JSON library
-# https://github.com/bblanchon/ArduinoJson
-# If you like this project, please add a star!
 
 cmake_minimum_required(VERSION 3.0)
 project(ArduinoJson)
 
 enable_testing()
 
-set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY ${CMAKE_SOURCE_DIR}/lib)
-set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${CMAKE_SOURCE_DIR}/lib)
-set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_SOURCE_DIR}/bin)
-
 if(${COVERAGE})
 	set(CMAKE_CXX_FLAGS "-g -O0 -fprofile-arcs -ftest-coverage")
 endif()
 
+include_directories(${CMAKE_CURRENT_LIST_DIR}/src)
+add_subdirectory(third-party/catch)
 add_subdirectory(test)

lib/ArduinoJson/CONTRIBUTING.md

@@ -0,0 +1,11 @@
+# Contribution to ArduinoJson
+
+First, thank you for taking the time to contribute to this project.
+
+You can submit changes via GitHub Pull Requests.
+
+Please:
+
+1. Unit test every change in behavior
+2. Use clang-format in "file" mode to format the code
+3. Consider using the Continuous Integration (Travis and AppVeyor)

lib/ArduinoJson/LICENSE.md

@@ -1,7 +1,7 @@
 The MIT License (MIT)
 ---------------------
 
-Copyright © 2014-2016 Benoit BLANCHON
+Copyright © 2014-2018 Benoit BLANCHON
 
 Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
 

lib/ArduinoJson/README.md

@@ -1,46 +1,60 @@
-Arduino JSON library
-====================
+![ArduinoJson](banner.svg)
+
+---
 
 [![Build status](https://ci.appveyor.com/api/projects/status/m7s53wav1l0abssg/branch/master?svg=true)](https://ci.appveyor.com/project/bblanchon/arduinojson/branch/master) [![Build Status](https://travis-ci.org/bblanchon/ArduinoJson.svg?branch=master)](https://travis-ci.org/bblanchon/ArduinoJson) [![Coverage Status](https://img.shields.io/coveralls/bblanchon/ArduinoJson.svg)](https://coveralls.io/r/bblanchon/ArduinoJson?branch=master) [![Star this project](http://githubbadges.com/star.svg?user=bblanchon&repo=ArduinoJson&style=flat&color=fff&background=007ec6)](https://github.com/bblanchon/ArduinoJson)
 
-*An elegant and efficient JSON library for embedded systems.*
+ArduinoJson is a C++ JSON library for Arduino and IoT (Internet Of Things).
 
-It's designed to have the most intuitive API, the smallest footprint and works without any allocation on the heap (no malloc).
-
-It has been written with Arduino in mind, but it isn't linked to Arduino libraries so you can use this library in any other C++ project.
-
-Features
---------
+## Features
 
 * JSON decoding (comments are supported)
 * JSON encoding (with optional indentation)
-* Elegant API, very easy to use
+* Elegant API, easy to use
 * Fixed memory allocation (zero malloc)
 * No data duplication (zero copy)
-* Portable (written in C++98)
+* Portable (written in C++98, can be used in any C++ project)
 * Self-contained (no external dependency)
 * Small footprint
-* Header-only library
-* MIT License
+* Input and output streams
+* [100% code coverage](https://coveralls.io/github/bblanchon/ArduinoJson)
+* [Header-only library](https://en.wikipedia.org/wiki/Header-only)
+* [MIT License](https://en.wikipedia.org/wiki/MIT_License)
+* [Comprehensive documentation](https://arduinojson.org?utm_source=github&utm_medium=readme)
 
-Works on
---------
+## Compatibility
 
-* All Arduino boards (Uno, Due, Mini, Micro, Yun...)
-* ESP8266
-* Teensy
-* Intel Edison and Galileo
-* PlatformIO
-* Energia
-* RedBearLab boards (BLE Nano...)
-* Computers (Windows, Linux, OSX...)
+ArduinoJson works on the following hardware:
 
-See [FAQ: Compatibility issues](https://github.com/bblanchon/ArduinoJson/wiki/Compatibility-issues)
+* <img src="https://www.arduino.cc/favicon.ico" height="16" width="16"> Arduino boards: [Uno](https://www.arduino.cc/en/Main/ArduinoBoardUno), [Due](https://www.arduino.cc/en/Main/ArduinoBoardDue), [Mini](https://www.arduino.cc/en/Main/ArduinoBoardMini), [Micro](https://www.arduino.cc/en/Main/ArduinoBoardMicro), [Yun](https://www.arduino.cc/en/Main/ArduinoBoardYun)...
+* <img src="http://espressif.com/sites/all/themes/espressif/favicon.ico" height="16" width="16"> Espressif chips: [ESP8266](https://en.wikipedia.org/wiki/ESP8266), [ESP32](https://en.wikipedia.org/wiki/ESP32)
+* <img src="https://www.wemos.cc/themes/martin-materialize-parallax/assets/favicon.ico" height="16" width="16"> WeMos boards: [D1](https://wiki.wemos.cc/products:d1:d1), [D1 mini](https://wiki.wemos.cc/products:d1:d1_mini),  ...
+* <img src="http://redbearlab.com/favicon.ico" height="16" width="16"> RedBearLab boards: [BLE Nano](http://redbearlab.com/blenano/), [BLE Mini](http://redbearlab.com/blemini/), [WiFi Micro](https://redbear.cc/product/wifi/wifi-micro.html), [LOLIN32](https://wiki.wemos.cc/products:lolin32:lolin32)...
+* <img src="https://www.pjrc.com/favicon.ico" height="16" width="16"> [Teensy](https://www.pjrc.com/teensy/) boards
+* <img src="https://software.intel.com/sites/all/themes/zero/favicon.ico" height="16" width="16"> Intel boards: Edison, Galileo...
+* <img src="https://www-assets.particle.io/images/favicon.png"  height="16" width="16"> Particle boards: [Photon](https://www.particle.io/products/hardware/photon-wifi-dev-kit), [Electron](https://www.particle.io/products/hardware/electron-cellular-dev-kit)...
+* <img src="http://www.ti.com/favicon.ico" height="16" width="16"> Texas Instruments boards: [MSP430](http://www.ti.com/microcontrollers/msp430-ultra-low-power-mcus/overview/overview.html)...
 
-Quick start
------------
+ArduinoJson compiles with zero warning on the following compilers, IDEs, and platforms:
 
-#### Decoding / Parsing
+* <img src="https://www.arduino.cc/favicon.ico" height="16" width="16"> [Arduino IDE](https://www.arduino.cc/en/Main/Software)
+* <img src="http://cdn.platformio.org/favicon.ico" height="16" width="16"> [PlatformIO](http://platformio.org/)
+* <img src="http://energia.nu/img/favicon.ico" height="16" width="16"> [Energia](http://energia.nu/)
+* <img src="http://www.visualmicro.com/pics/arduino-visual-studio-ld.png" height="16" width="16"> [Visual Micro](http://www.visualmicro.com/)
+* <img src="http://www.atmel.com/Images/favicon.ico" height="16" width="16"> [Atmel Studio](http://www.atmel.com/microsite/atmel-studio/)
+* <img src="https://www.iar.com/favicon.ico" height="16" width="16"> [IAR Embedded Workbench](https://www.iar.com/iar-embedded-workbench/)
+* <img src="http://www.st.com/etc/clientlibs/st-site/media/app/images/favicon.png" height="16" width="16"> [Atollic TrueSTUDIO](https://atollic.com/truestudio/)
+* <img src="http://www.keil.com/favicon.ico" height="16" width="16"> [Keil uVision](http://www.keil.com/)
+* <img src="http://www.microchip.com/favicon.ico" height="16" width="16"> [MPLAB X IDE](http://www.microchip.com/mplab/mplab-x-ide)
+* <img src="https://gcc.gnu.org/favicon.ico" height="16" width="16"> [GCC](https://gcc.gnu.org/)
+* <img src="https://clang.llvm.org/favicon.ico" height="16" width="16"> [Clang](https://clang.llvm.org/)
+* <img src="https://www.visualstudio.com/favicon.ico" height="16" width="16"> [Visual Studio](https://www.visualstudio.com/)
+
+## Quickstart
+
+### Deserialization
+
+Here is a program that parses a JSON document with ArduinoJson.
 
 ```c++
 char json[] = "{\"sensor\":\"gps\",\"time\":1351824120,\"data\":[48.756080,2.302038]}";
@@ -55,7 +69,11 @@ double latitude    = root["data"][0];
 double longitude   = root["data"][1];
 ```
 
-#### Encoding / Generating
+See the [tutorial on arduinojson.org](https://arduinojson.org/doc/decoding/?utm_source=github&utm_medium=readme)
+
+### Serialization
+
+Here is a program that generates a JSON document with ArduinoJson:
 
 ```c++
 StaticJsonBuffer<200> jsonBuffer;
@@ -65,66 +83,28 @@ root["sensor"] = "gps";
 root["time"] = 1351824120;
 
 JsonArray& data = root.createNestedArray("data");
-data.add(48.756080, 6);  // 6 is the number of decimals to print
-data.add(2.302038, 6);   // if not specified, 2 digits are printed
+data.add(48.756080);
+data.add(2.302038);
 
 root.printTo(Serial);
 // This prints:
 // {"sensor":"gps","time":1351824120,"data":[48.756080,2.302038]}
 ```
 
+See the [tutorial on arduinojson.org](https://arduinojson.org/doc/encoding/?utm_source=github&utm_medium=readme)
 
-Documentation
--------------
+## Documentation
 
-The documentation is available online in the [Arduino JSON wiki](https://github.com/bblanchon/ArduinoJson/wiki)
+The documentation is available on [arduinojson.org](https://arduinojson.org/?utm_source=github&utm_medium=readme), here are some shortcuts:
 
-Testimonials
-------------
-
-From Arduino's Forum user `jflaplante`:
-> I tried aJson json-arduino before trying your library. I always ran into memory problem after a while.
-> I have no such problem so far with your library. It is working perfectly with my web services.
-
-From Arduino's Forum user `gbathree`:
-> Thanks so much - this is an awesome library!  If you want to see what we're doing with it - the project is located at www.photosynq.org.
-
-From StackOverflow user `thegreendroid`:
-> It has a really elegant, simple API and it works like a charm on embedded and Windows/Linux platforms. We recently started using this on an embedded project and I can vouch for its quality.
-
-From GitHub user `zacsketches`:
-> Thanks for a great library!!!
-> I've been watching you consistently develop this library over the past six months, and I used it today for a publish and subscribe architecture designed to help hobbyists move into more advanced robotics. Your library allowed me to implement remote subscription in order to facilitate multi-processor robots.
-> ArduinoJson saved me a week's worth of time!!
-
-[From Reddit user `erm_what_`](https://www.reddit.com/r/arduino/comments/3jj6ep/announcing_arduinojson_50/cusjk8c):
-> This is a great library and I wouldn't be able to do the project I'm doing without it. I completely recommend it.
-
-[From Reddit user `makerhacks`](https://www.reddit.com/r/arduino/comments/3jj6ep/announcing_arduinojson_50/cusqg7b):
-> I am just starting an ESP8266 clock project and now I can output JSON from my server script and interpret it painlessly.
-
-[From Twitter user `@hemalchevli`](https://twitter.com/hemalchevli/status/715788439397011456):
-> ArduinoJson library should be used as a benchmark/reference for making libraries. Truly elegant.
-
-Donators
---------
-
-Special thanks to the following persons and companies who made generous donations to the library author:
-
-* Robert Murphy <img alt='USA' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1fa-1f1f8.svg' width='18' height='18'>
-* Surge Communications <img alt='USA' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1fa-1f1f8.svg' width='18' height='18'>
-* Alex Scott <img alt='United Kingdom' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1ec-1f1e7.svg' width='18' height='18'>
-* Firepick Services LLC <img alt='USA' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1fa-1f1f8.svg' width='18' height='18'>
-* A B Doodkorte <img alt='Netherlands' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1f3-1f1f1.svg' width='18' height='18'>
-* Scott Smith <img alt='USA' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1fa-1f1f8.svg' width='18' height='18'>
-* Johann Stieger <img alt='Austria' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1e6-1f1f9.svg' width='18' height='18'>
-* Gustavo Donizeti Gini <img alt='Brazil' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1e7-1f1f7.svg' width='18' height='18'>
-* Charles-Henri Hallard <img alt='France' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1eb-1f1f7.svg' width='18' height='18'>
-* Martijn van den Burg <img alt='Netherlands' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1f3-1f1f1.svg' width='18' height='18'>
-* Nick Koumaris <img alt='Greece' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1ec-1f1f7.svg' width='18' height='18'>
-* Jon Williams <img alt='USA' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1fa-1f1f8.svg' width='18' height='18'>
-* Kestutis Liaugminas <img alt='Lithuania' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1f1-1f1f9.svg' width='18' height='18'>
+* The [Examples](https://arduinojson.org/example/?utm_source=github&utm_medium=readme) show how to use the library in various situations.
+* The [API Reference](https://arduinojson.org/api/?utm_source=github&utm_medium=readme) contains the description of each class and function.
+* The [FAQ](https://arduinojson.org/faq/?utm_source=github&utm_medium=readme) has the answer to virtually every question.
+* The [ArduinoJson Assistant](https://arduinojson.org/assistant/?utm_source=github&utm_medium=readme) writes programs for you!
 
 ---
 
-Found this library useful? Please star this project or [help me back with a donation!](https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=donate%40benoitblanchon%2efr&lc=GB&item_name=Benoit%20Blanchon&item_number=Arduino%20JSON&currency_code=EUR&bn=PP%2dDonationsBF%3abtn_donate_LG%2egif%3aNonHosted) :smile:
+Do you like this library? Please [star this project on GitHub](https://github.com/bblanchon/ArduinoJson/stargazers)!
+
+What? You don't like it but you *love* it?
+We don't take donations anymore, but [we sell a book](https://arduinojson.org/book/?utm_source=github&utm_medium=readme), so you can help and learn at the same time!

lib/ArduinoJson/SUPPORT.md

@@ -0,0 +1,27 @@
+# ArduinoJson Support
+
+First off, thank you very much for using ArduinoJson.
+
+We'll be very happy to help you, but first please read the following.
+
+## Before asking for help
+
+1. Read the [FAQ](https://arduinojson.org/faq/?utm_source=github&utm_medium=support)
+2. Search in the [API Reference](https://arduinojson.org/api/?utm_source=github&utm_medium=support)
+
+If you did not find the answer, please create a [new issue on GitHub](https://github.com/bblanchon/ArduinoJson/issues/new).
+
+It is OK to add a comment to a currently opened issue, but please avoid adding comments to a closed issue.
+
+## Before hitting the Submit button
+
+Please provide all the relevant information:
+
+* Good title
+* Short description of the problem
+* Target platform
+* Compiler model and version
+* [MVCE](https://stackoverflow.com/help/mcve)
+* Compiler output
+
+Good questions get fast answers!

lib/ArduinoJson/appveyor.yml

@@ -1,13 +1,15 @@
-version: 5.6.4.{build}
+version: 5.13.2.{build}
 environment:
   matrix:
-  - CMAKE_GENERATOR: Visual Studio 14 2015
-  - CMAKE_GENERATOR: Visual Studio 12 2013
+  - APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2017
+    CMAKE_GENERATOR: Visual Studio 15 2017
+  - APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2015
+    CMAKE_GENERATOR: Visual Studio 14 2015
+  - APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2013
+    CMAKE_GENERATOR: Visual Studio 12 2013
   - CMAKE_GENERATOR: Visual Studio 11 2012
   - CMAKE_GENERATOR: Visual Studio 10 2010
-#  - CMAKE_GENERATOR: MinGW Makefiles
-# Note: Disabled because of unexplicated error -1073741511
-# This used to work fine with GCC 4.8.2 then failed after they upgraded to GCC 4.9.3
+  - CMAKE_GENERATOR: MinGW Makefiles
 configuration: Debug
 before_build:
 - set PATH=C:\MinGW\bin;%PATH:C:\Program Files\Git\usr\bin;=% # Workaround for CMake not wanting sh.exe on PATH for MinGW
@@ -15,4 +17,4 @@ before_build:
 build_script:
 - cmake --build . --config %CONFIGURATION%
 test_script:
-- ctest -V .
+- ctest --output-on-failure .

lib/ArduinoJson/examples/IndentedPrintExample/IndentedPrintExample.ino

@@ -1,35 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#include <ArduinoJson.h>
-
-using namespace ArduinoJson::Internals;
-
-void setup() {
-  Serial.begin(9600);
-  while (!Serial) {
-    // wait serial port initialization
-  }
-
-  IndentedPrint serial(Serial);
-  serial.setTabSize(4);
-
-  serial.println("This is at indentation 0");
-  serial.indent();
-  serial.println("This is at indentation 1");
-  serial.println("This is also at indentation 1");
-  serial.indent();
-  serial.println("This is at indentation 2");
-
-  serial.unindent();
-  serial.unindent();
-  serial.println("This is back at indentation 0");
-}
-
-void loop() {
-  // not used in this example
-}

lib/ArduinoJson/examples/JsonConfigFile/JsonConfigFile.ino

@@ -0,0 +1,144 @@
+// ArduinoJson - arduinojson.org
+// Copyright Benoit Blanchon 2014-2018
+// MIT License
+//
+// This example shows how to store your project configuration in a file.
+// It uses the SD library but can be easily modified for any other file-system.
+//
+// The file contains a JSON document with the following content:
+// {
+//   "hostname": "examples.com",
+//   "port": 2731
+// }
+
+#include <ArduinoJson.h>
+#include <SD.h>
+#include <SPI.h>
+
+// Configuration that we'll store on disk
+struct Config {
+  char hostname[64];
+  int port;
+};
+
+const char *filename = "/config.txt";  // <- SD library uses 8.3 filenames
+Config config;                         // <- global configuration object
+
+// Loads the configuration from a file
+void loadConfiguration(const char *filename, Config &config) {
+  // Open file for reading
+  File file = SD.open(filename);
+
+  // Allocate the memory pool on the stack.
+  // Don't forget to change the capacity to match your JSON document.
+  // Use arduinojson.org/assistant to compute the capacity.
+  StaticJsonBuffer<512> jsonBuffer;
+
+  // Parse the root object
+  JsonObject &root = jsonBuffer.parseObject(file);
+
+  if (!root.success())
+    Serial.println(F("Failed to read file, using default configuration"));
+
+  // Copy values from the JsonObject to the Config
+  config.port = root["port"] | 2731;
+  strlcpy(config.hostname,                   // <- destination
+          root["hostname"] | "example.com",  // <- source
+          sizeof(config.hostname));          // <- destination's capacity
+
+  // Close the file (File's destructor doesn't close the file)
+  file.close();
+}
+
+// Saves the configuration to a file
+void saveConfiguration(const char *filename, const Config &config) {
+  // Delete existing file, otherwise the configuration is appended to the file
+  SD.remove(filename);
+
+  // Open file for writing
+  File file = SD.open(filename, FILE_WRITE);
+  if (!file) {
+    Serial.println(F("Failed to create file"));
+    return;
+  }
+
+  // Allocate the memory pool on the stack
+  // Don't forget to change the capacity to match your JSON document.
+  // Use https://arduinojson.org/assistant/ to compute the capacity.
+  StaticJsonBuffer<256> jsonBuffer;
+
+  // Parse the root object
+  JsonObject &root = jsonBuffer.createObject();
+
+  // Set the values
+  root["hostname"] = config.hostname;
+  root["port"] = config.port;
+
+  // Serialize JSON to file
+  if (root.printTo(file) == 0) {
+    Serial.println(F("Failed to write to file"));
+  }
+
+  // Close the file (File's destructor doesn't close the file)
+  file.close();
+}
+
+// Prints the content of a file to the Serial
+void printFile(const char *filename) {
+  // Open file for reading
+  File file = SD.open(filename);
+  if (!file) {
+    Serial.println(F("Failed to read file"));
+    return;
+  }
+
+  // Extract each characters by one by one
+  while (file.available()) {
+    Serial.print((char)file.read());
+  }
+  Serial.println();
+
+  // Close the file (File's destructor doesn't close the file)
+  file.close();
+}
+
+void setup() {
+  // Initialize serial port
+  Serial.begin(9600);
+  while (!Serial) continue;
+
+  // Initialize SD library
+  while (!SD.begin()) {
+    Serial.println(F("Failed to initialize SD library"));
+    delay(1000);
+  }
+
+  // Should load default config if run for the first time
+  Serial.println(F("Loading configuration..."));
+  loadConfiguration(filename, config);
+
+  // Create configuration file
+  Serial.println(F("Saving configuration..."));
+  saveConfiguration(filename, config);
+
+  // Dump config file
+  Serial.println(F("Print config file..."));
+  printFile(filename);
+}
+
+void loop() {
+  // not used in this example
+}
+
+// See also
+// --------
+//
+// The website arduinojson.org contains the documentation for all the functions
+// used above. It also includes an FAQ that will help you solve any
+// serialization or deserialization problem.
+// Please check it out at: https://arduinojson.org/
+//
+// The book "Mastering ArduinoJson" contains a case study of a project that has
+// a complex configuration with nested members.
+// Contrary to this example, the project in the book uses the SPIFFS filesystem.
+// Please check it out at: https://arduinojson.org/book/

lib/ArduinoJson/examples/JsonGeneratorExample/JsonGeneratorExample.ino

@@ -1,29 +1,27 @@
-// Copyright Benoit Blanchon 2014-2016
+// ArduinoJson - arduinojson.org
+// Copyright Benoit Blanchon 2014-2018
 // MIT License
 //
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
+// This example shows how to generate a JSON document with ArduinoJson.
 
 #include <ArduinoJson.h>
 
 void setup() {
+  // Initialize Serial port
   Serial.begin(9600);
-  while (!Serial) {
-    // wait serial port initialization
-  }
+  while (!Serial) continue;
 
   // Memory pool for JSON object tree.
   //
   // Inside the brackets, 200 is the size of the pool in bytes.
-  // If the JSON object is more complex, you need to increase that value.
+  // Don't forget to change this value to match your JSON document.
+  // Use arduinojson.org/assistant to compute the capacity.
   StaticJsonBuffer<200> jsonBuffer;
 
   // StaticJsonBuffer allocates memory on the stack, it can be
   // replaced by DynamicJsonBuffer which allocates in the heap.
-  // It's simpler but less efficient.
   //
-  // DynamicJsonBuffer  jsonBuffer;
+  // DynamicJsonBuffer  jsonBuffer(200);
 
   // Create the root of the object tree.
   //
@@ -44,8 +42,8 @@ void setup() {
   // It's also possible to create the array separately and add it to the
   // JsonObject but it's less efficient.
   JsonArray& data = root.createNestedArray("data");
-  data.add(double_with_n_digits(48.756080, 6));
-  data.add(double_with_n_digits(2.302038, 6));
+  data.add(48.756080);
+  data.add(2.302038);
 
   root.printTo(Serial);
   // This prints:
@@ -68,3 +66,16 @@ void setup() {
 void loop() {
   // not used in this example
 }
+
+// See also
+// --------
+//
+// The website arduinojson.org contains the documentation for all the functions
+// used above. It also includes an FAQ that will help you solve any
+// serialization problem.
+// Please check it out at: https://arduinojson.org/
+//
+// The book "Mastering ArduinoJson" contains a tutorial on serialization.
+// It begins with a simple example, like the one above, and then adds more
+// features like serializing directly to a file or an HTTP request.
+// Please check it out at: https://arduinojson.org/book/

lib/ArduinoJson/examples/JsonHttpClient/JsonHttpClient.ino

@@ -1,195 +1,112 @@
-// Sample Arduino Json Web Client
-// Downloads and parse http://jsonplaceholder.typicode.com/users/1
-//
-// Copyright Benoit Blanchon 2014-2016
+// ArduinoJson - arduinojson.org
+// Copyright Benoit Blanchon 2014-2018
 // MIT License
 //
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
+// This example shows how to parse a JSON document in an HTTP response.
+// It uses the Ethernet library, but can be easily adapted for Wifi.
+//
+// It performs a GET resquest on arduinojson.org/example.json
+// Here is the expected response:
+// {
+//   "sensor": "gps",
+//   "time": 1351824120,
+//   "data": [
+//     48.756080,
+//     2.302038
+//   ]
+// }
 
 #include <ArduinoJson.h>
-#include <SPI.h>
 #include <Ethernet.h>
+#include <SPI.h>
 
-EthernetClient client;
-
-const char* server = "jsonplaceholder.typicode.com";  // server's address
-const char* resource = "/users/1";                    // http resource
-const unsigned long BAUD_RATE = 9600;                 // serial connection speed
-const unsigned long HTTP_TIMEOUT = 10000;  // max respone time from server
-const size_t MAX_CONTENT_SIZE = 512;       // max size of the HTTP response
-
-// The type of data that we want to extract from the page
-struct UserData {
-  char name[32];
-  char company[32];
-};
-
-// ARDUINO entry point #1: runs once when you press reset or power the board
 void setup() {
-  initSerial();
-  initEthernet();
-}
+  // Initialize Serial port
+  Serial.begin(9600);
+  while (!Serial) continue;
 
-// ARDUINO entry point #2: runs over and over again forever
-void loop() {
-  if (connect(server)) {
-    if (sendRequest(server, resource) && skipResponseHeaders()) {
-      char response[MAX_CONTENT_SIZE];
-      readReponseContent(response, sizeof(response));
-
-      UserData userData;
-      if (parseUserData(response, &userData)) {
-        printUserData(&userData);
-      }
-    }
-    disconnect();
-  }
-  wait();
-}
-
-// Initialize Serial port
-void initSerial() {
-  Serial.begin(BAUD_RATE);
-  while (!Serial) {
-    ;  // wait for serial port to initialize
-  }
-  Serial.println("Serial ready");
-}
-
-// Initialize Ethernet library
-void initEthernet() {
+  // Initialize Ethernet library
   byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
   if (!Ethernet.begin(mac)) {
-    Serial.println("Failed to configure Ethernet");
+    Serial.println(F("Failed to configure Ethernet"));
     return;
   }
-  Serial.println("Ethernet ready");
   delay(1000);
-}
 
-// Open connection to the HTTP server
-bool connect(const char* hostName) {
-  Serial.print("Connect to ");
-  Serial.println(hostName);
+  Serial.println(F("Connecting..."));
 
-  bool ok = client.connect(hostName, 80);
+  // Connect to HTTP server
+  EthernetClient client;
+  client.setTimeout(10000);
+  if (!client.connect("arduinojson.org", 80)) {
+    Serial.println(F("Connection failed"));
+    return;
+  }
 
-  Serial.println(ok ? "Connected" : "Connection Failed!");
-  return ok;
-}
+  Serial.println(F("Connected!"));
 
-// Send the HTTP GET request to the server
-bool sendRequest(const char* host, const char* resource) {
-  Serial.print("GET ");
-  Serial.println(resource);
+  // Send HTTP request
+  client.println(F("GET /example.json HTTP/1.0"));
+  client.println(F("Host: arduinojson.org"));
+  client.println(F("Connection: close"));
+  if (client.println() == 0) {
+    Serial.println(F("Failed to send request"));
+    return;
+  }
 
-  client.print("GET ");
-  client.print(resource);
-  client.println(" HTTP/1.1");
-  client.print("Host: ");
-  client.println(server);
-  client.println("Connection: close");
-  client.println();
+  // Check HTTP status
+  char status[32] = {0};
+  client.readBytesUntil('\r', status, sizeof(status));
+  if (strcmp(status, "HTTP/1.1 200 OK") != 0) {
+    Serial.print(F("Unexpected response: "));
+    Serial.println(status);
+    return;
+  }
 
-  return true;
-}
-
-// Skip HTTP headers so that we are at the beginning of the response's body
-bool skipResponseHeaders() {
-  // HTTP headers end with an empty line
+  // Skip HTTP headers
   char endOfHeaders[] = "\r\n\r\n";
-
-  client.setTimeout(HTTP_TIMEOUT);
-  bool ok = client.find(endOfHeaders);
-
-  if (!ok) {
-    Serial.println("No response or invalid response!");
+  if (!client.find(endOfHeaders)) {
+    Serial.println(F("Invalid response"));
+    return;
   }
 
-  return ok;
-}
-
-// Read the body of the response from the HTTP server
-void readReponseContent(char* content, size_t maxSize) {
-  size_t length = client.readBytes(content, maxSize);
-  content[length] = 0;
-  Serial.println(content);
-}
-
-// Parse the JSON from the input string and extract the interesting values
-// Here is the JSON we need to parse
-// {
-//   "id": 1,
-//   "name": "Leanne Graham",
-//   "username": "Bret",
-//   "email": "Sincere@april.biz",
-//   "address": {
-//     "street": "Kulas Light",
-//     "suite": "Apt. 556",
-//     "city": "Gwenborough",
-//     "zipcode": "92998-3874",
-//     "geo": {
-//       "lat": "-37.3159",
-//       "lng": "81.1496"
-//     }
-//   },
-//   "phone": "1-770-736-8031 x56442",
-//   "website": "hildegard.org",
-//   "company": {
-//     "name": "Romaguera-Crona",
-//     "catchPhrase": "Multi-layered client-server neural-net",
-//     "bs": "harness real-time e-markets"
-//   }
-// }
-bool parseUserData(char* content, struct UserData* userData) {
-  // Compute optimal size of the JSON buffer according to what we need to parse.
-  // This is only required if you use StaticJsonBuffer.
-  const size_t BUFFER_SIZE =
-      JSON_OBJECT_SIZE(8)     // the root object has 8 elements
-      + JSON_OBJECT_SIZE(5)   // the "address" object has 5 elements
-      + JSON_OBJECT_SIZE(2)   // the "geo" object has 2 elements
-      + JSON_OBJECT_SIZE(3);  // the "company" object has 3 elements
-
-  // Allocate a temporary memory pool on the stack
-  StaticJsonBuffer<BUFFER_SIZE> jsonBuffer;
-  // If the memory pool is too big for the stack, use this instead:
-  // DynamicJsonBuffer jsonBuffer;
-
-  JsonObject& root = jsonBuffer.parseObject(content);
+  // Allocate JsonBuffer
+  // Use arduinojson.org/assistant to compute the capacity.
+  const size_t capacity = JSON_OBJECT_SIZE(3) + JSON_ARRAY_SIZE(2) + 60;
+  DynamicJsonBuffer jsonBuffer(capacity);
 
+  // Parse JSON object
+  JsonObject& root = jsonBuffer.parseObject(client);
   if (!root.success()) {
-    Serial.println("JSON parsing failed!");
-    return false;
+    Serial.println(F("Parsing failed!"));
+    return;
   }
 
-  // Here were copy the strings we're interested in
-  strcpy(userData->name, root["name"]);
-  strcpy(userData->company, root["company"]["name"]);
-  // It's not mandatory to make a copy, you could just use the pointers
-  // Since, they are pointing inside the "content" buffer, so you need to make
-  // sure it's still in memory when you read the string
+  // Extract values
+  Serial.println(F("Response:"));
+  Serial.println(root["sensor"].as<char*>());
+  Serial.println(root["time"].as<char*>());
+  Serial.println(root["data"][0].as<char*>());
+  Serial.println(root["data"][1].as<char*>());
 
-  return true;
-}
-
-// Print the data extracted from the JSON
-void printUserData(const struct UserData* userData) {
-  Serial.print("Name = ");
-  Serial.println(userData->name);
-  Serial.print("Company = ");
-  Serial.println(userData->company);
-}
-
-// Close the connection with the HTTP server
-void disconnect() {
-  Serial.println("Disconnect");
+  // Disconnect
   client.stop();
 }
 
-// Pause for a 1 minute
-void wait() {
-  Serial.println("Wait 60 seconds");
-  delay(60000);
+void loop() {
+  // not used in this example
 }
+
+// See also
+// --------
+//
+// The website arduinojson.org contains the documentation for all the functions
+// used above. It also includes an FAQ that will help you solve any
+// serialization  problem.
+// Please check it out at: https://arduinojson.org/
+//
+// The book "Mastering ArduinoJson" contains a tutorial on deserialization
+// showing how to parse the response from Yahoo Weather. In the last chapter,
+// it shows how to parse the huge documents from OpenWeatherMap
+// and Weather Underground.
+// Please check it out at: https://arduinojson.org/book/

lib/ArduinoJson/examples/JsonParserExample/JsonParserExample.ino

@@ -1,29 +1,27 @@
-// Copyright Benoit Blanchon 2014-2016
+// ArduinoJson - arduinojson.org
+// Copyright Benoit Blanchon 2014-2018
 // MIT License
 //
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
+// This example shows how to deserialize a JSON document with ArduinoJson.
 
 #include <ArduinoJson.h>
 
 void setup() {
+  // Initialize serial port
   Serial.begin(9600);
-  while (!Serial) {
-    // wait serial port initialization
-  }
+  while (!Serial) continue;
 
   // Memory pool for JSON object tree.
   //
-  // Inside the brackets, 200 is the size of the pool in bytes,
-  // If the JSON object is more complex, you need to increase that value.
+  // Inside the brackets, 200 is the size of the pool in bytes.
+  // Don't forget to change this value to match your JSON document.
+  // Use arduinojson.org/assistant to compute the capacity.
   StaticJsonBuffer<200> jsonBuffer;
 
   // StaticJsonBuffer allocates memory on the stack, it can be
   // replaced by DynamicJsonBuffer which allocates in the heap.
-  // It's simpler but less efficient.
   //
-  // DynamicJsonBuffer  jsonBuffer;
+  // DynamicJsonBuffer  jsonBuffer(200);
 
   // JSON input string.
   //
@@ -65,3 +63,16 @@ void setup() {
 void loop() {
   // not used in this example
 }
+
+// See also
+// --------
+//
+// The website arduinojson.org contains the documentation for all the functions
+// used above. It also includes an FAQ that will help you solve any
+// deserialization problem.
+// Please check it out at: https://arduinojson.org/
+//
+// The book "Mastering ArduinoJson" contains a tutorial on deserialization.
+// It begins with a simple example, like the one above, and then adds more
+// features like deserializing directly from a file or an HTTP request.
+// Please check it out at: https://arduinojson.org/book/

lib/ArduinoJson/examples/JsonServer/JsonServer.ino

@@ -1,74 +1,109 @@
-// Sample Arduino Json Web Server
-// Created by Benoit Blanchon.
-// Heavily inspired by "Web Server" from David A. Mellis and Tom Igoe
+// ArduinoJson - arduinojson.org
+// Copyright Benoit Blanchon 2014-2018
+// MIT License
+//
+// This example shows how to implement an HTTP server that sends JSON document
+// in the responses.
+// It uses the Ethernet library but can be easily adapted for Wifi.
+//
+// It sends the value of the analog and digital pins.
+// The JSON document looks like the following:
+// {
+//   "analog": [ 0, 1, 2, 3, 4, 5 ],
+//   "digital": [ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 ]
+// }
 
-#include <SPI.h>
-#include <Ethernet.h>
 #include <ArduinoJson.h>
+#include <Ethernet.h>
+#include <SPI.h>
 
 byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
-IPAddress ip(192, 168, 0, 177);
 EthernetServer server(80);
 
-bool readRequest(EthernetClient& client) {
-  bool currentLineIsBlank = true;
-  while (client.connected()) {
-    if (client.available()) {
-      char c = client.read();
-      if (c == '\n' && currentLineIsBlank) {
-        return true;
-      } else if (c == '\n') {
-        currentLineIsBlank = true;
-      } else if (c != '\r') {
-        currentLineIsBlank = false;
-      }
-    }
+void setup() {
+  // Initialize serial port
+  Serial.begin(9600);
+  while (!Serial) continue;
+
+  // Initialize Ethernet libary
+  if (!Ethernet.begin(mac)) {
+    Serial.println(F("Failed to initialize Ethernet library"));
+    return;
   }
-  return false;
+
+  // Start to listen
+  server.begin();
+
+  Serial.println(F("Server is ready."));
+  Serial.print(F("Please connect to http://"));
+  Serial.println(Ethernet.localIP());
 }
 
-JsonObject& prepareResponse(JsonBuffer& jsonBuffer) {
+void loop() {
+  // Wait for an incomming connection
+  EthernetClient client = server.available();
+
+  // Do we have a client?
+  if (!client) return;
+
+  Serial.println(F("New client"));
+
+  // Read the request (we ignore the content in this example)
+  while (client.available()) client.read();
+
+  // Allocate JsonBuffer
+  // Use arduinojson.org/assistant to compute the capacity.
+  StaticJsonBuffer<500> jsonBuffer;
+
+  // Create the root object
   JsonObject& root = jsonBuffer.createObject();
 
+  // Create the "analog" array
   JsonArray& analogValues = root.createNestedArray("analog");
   for (int pin = 0; pin < 6; pin++) {
+    // Read the analog input
     int value = analogRead(pin);
+
+    // Add the value at the end of the array
     analogValues.add(value);
   }
 
+  // Create the "digital" array
   JsonArray& digitalValues = root.createNestedArray("digital");
   for (int pin = 0; pin < 14; pin++) {
+    // Read the digital input
     int value = digitalRead(pin);
+
+    // Add the value at the end of the array
     digitalValues.add(value);
   }
 
-  return root;
-}
+  Serial.print(F("Sending: "));
+  root.printTo(Serial);
+  Serial.println();
 
-void writeResponse(EthernetClient& client, JsonObject& json) {
-  client.println("HTTP/1.1 200 OK");
+  // Write response headers
+  client.println("HTTP/1.0 200 OK");
   client.println("Content-Type: application/json");
   client.println("Connection: close");
   client.println();
 
-  json.prettyPrintTo(client);
+  // Write JSON document
+  root.prettyPrintTo(client);
+
+  // Disconnect
+  client.stop();
 }
 
-void setup() {
-  Ethernet.begin(mac, ip);
-  server.begin();
-}
-
-void loop() {
-  EthernetClient client = server.available();
-  if (client) {
-    bool success = readRequest(client);
-    if (success) {
-      StaticJsonBuffer<500> jsonBuffer;
-      JsonObject& json = prepareResponse(jsonBuffer);
-      writeResponse(client, json);
-    }
-    delay(1);
-    client.stop();
-  }
-}
+// See also
+// --------
+//
+// The website arduinojson.org contains the documentation for all the functions
+// used above. It also includes an FAQ that will help you solve any
+// serialization problem.
+// Please check it out at: https://arduinojson.org/
+//
+// The book "Mastering ArduinoJson" contains a tutorial on serialization.
+// It begins with a simple example, then adds more features like serializing
+// directly to a file or an HTTP client.
+// Please check it out at: https://arduinojson.org/book/

lib/ArduinoJson/examples/JsonUdpBeacon/JsonUdpBeacon.ino

@@ -1,55 +1,101 @@
-// Send a JSON object on UDP at regular interval
+// ArduinoJson - arduinojson.org
+// Copyright Benoit Blanchon 2014-2018
+// MIT License
 //
-// You can easily test this program with netcat:
-// $ nc -ulp 8888
+// This example shows how to send a JSON document to a UDP socket.
+// At regular interval, it sends a UDP packet that contains the status of
+// analog and digital pins.
+// The JSON document looks like the following:
+// {
+//   "analog": [ 0, 1, 2, 3, 4, 5 ],
+//   "digital": [ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 ]
+// }
 //
-// by Benoit Blanchon, MIT License 2015-2016
+// If you want to test this program, you need to be able to receive the UDP
+// packets.
+// For example, you can run netcat on your computer
+// $ ncat -ulp 8888
+// See https://nmap.org/ncat/
 
-#include <SPI.h>
-#include <Ethernet.h>
 #include <ArduinoJson.h>
+#include <Ethernet.h>
+#include <SPI.h>
 
 byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
-IPAddress localIp(192, 168, 0, 177);
-IPAddress remoteIp(192, 168, 0, 109);
-unsigned int remotePort = 8888;
-unsigned localPort = 8888;
+IPAddress remoteIp(192, 168, 0, 108);  // <- EDIT!!!!
+unsigned short remotePort = 8888;
+unsigned short localPort = 8888;
 EthernetUDP udp;
 
-JsonObject& buildJson(JsonBuffer& jsonBuffer) {
-  JsonObject& root = jsonBuffer.createObject();
-
-  JsonArray& analogValues = root.createNestedArray("analog");
-  for (int pin = 0; pin < 6; pin++) {
-    int value = analogRead(pin);
-    analogValues.add(value);
-  }
-
-  JsonArray& digitalValues = root.createNestedArray("digital");
-  for (int pin = 0; pin < 14; pin++) {
-    int value = digitalRead(pin);
-    digitalValues.add(value);
-  }
-
-  return root;
-}
-
-void sendJson(JsonObject& json) {
-  udp.beginPacket(remoteIp, remotePort);
-  json.printTo(udp);
-  udp.println();
-  udp.endPacket();
-}
-
 void setup() {
-  Ethernet.begin(mac, localIp);
+  // Initialize serial port
+  Serial.begin(9600);
+  while (!Serial) continue;
+
+  // Initialize Ethernet libary
+  if (!Ethernet.begin(mac)) {
+    Serial.println(F("Failed to initialize Ethernet library"));
+    return;
+  }
+
+  // Enable UDP
   udp.begin(localPort);
 }
 
 void loop() {
-  delay(1000);
+  // Allocate JsonBuffer
+  // Use arduinojson.org/assistant to compute the capacity.
+  StaticJsonBuffer<500> jsonBuffer;
 
-  StaticJsonBuffer<300> jsonBuffer;
-  JsonObject& json = buildJson(jsonBuffer);
-  sendJson(json);
+  // Create the root object
+  JsonObject& root = jsonBuffer.createObject();
+
+  // Create the "analog" array
+  JsonArray& analogValues = root.createNestedArray("analog");
+  for (int pin = 0; pin < 6; pin++) {
+    // Read the analog input
+    int value = analogRead(pin);
+
+    // Add the value at the end of the array
+    analogValues.add(value);
+  }
+
+  // Create the "digital" array
+  JsonArray& digitalValues = root.createNestedArray("digital");
+  for (int pin = 0; pin < 14; pin++) {
+    // Read the digital input
+    int value = digitalRead(pin);
+
+    // Add the value at the end of the array
+    digitalValues.add(value);
+  }
+
+  // Log
+  Serial.print(F("Sending to "));
+  Serial.print(remoteIp);
+  Serial.print(F(" on port "));
+  Serial.println(remotePort);
+  root.printTo(Serial);
+
+  // Send UDP packet
+  udp.beginPacket(remoteIp, remotePort);
+  root.printTo(udp);
+  udp.println();
+  udp.endPacket();
+
+  // Wait
+  delay(10000);
 }
+
+// See also
+// --------
+//
+// The website arduinojson.org contains the documentation for all the functions
+// used above. It also includes an FAQ that will help you solve any
+// serialization problem.
+// Please check it out at: https://arduinojson.org/
+//
+// The book "Mastering ArduinoJson" contains a tutorial on serialization.
+// It begins with a simple example, then adds more features like serializing
+// directly to a file or any stream.
+// Please check it out at: https://arduinojson.org/book/

lib/ArduinoJson/examples/ProgmemExample/ProgmemExample.ino

@@ -0,0 +1,70 @@
+// ArduinoJson - arduinojson.org
+// Copyright Benoit Blanchon 2014-2018
+// MIT License
+//
+// This example shows the different ways you can use Flash strings with
+// ArduinoJson.
+//
+// Use Flash strings sparingly, because ArduinoJson duplicates them in the
+// JsonBuffer. Prefer plain old char*, as they are more efficient in term of
+// code size, speed, and memory usage.
+
+#include <ArduinoJson.h>
+
+void setup() {
+#ifdef PROGMEM  // <- check that Flash strings are supported
+
+  DynamicJsonBuffer jsonBuffer;
+
+  // You can use a Flash String as your JSON input.
+  // WARNING: the content of the Flash String will be duplicated in the
+  // JsonBuffer.
+  JsonObject& root =
+      jsonBuffer.parseObject(F("{\"sensor\":\"gps\",\"time\":1351824120,"
+                               "\"data\":[48.756080,2.302038]}"));
+
+  // You can use a Flash String to get an element of a JsonObject
+  // No duplication is done.
+  long time = root[F("time")];
+
+  // You can use a Flash String to set an element of a JsonObject
+  // WARNING: the content of the Flash String will be duplicated in the
+  // JsonBuffer.
+  root[F("time")] = time;
+
+  // You can set a Flash String to a JsonObject or JsonArray:
+  // WARNING: the content of the Flash String will be duplicated in the
+  // JsonBuffer.
+  root["sensor"] = F("gps");
+
+  // It works with RawJson too:
+  root["sensor"] = RawJson(F("\"gps\""));
+
+  // You can compare the content of a JsonVariant to a Flash String
+  if (root["sensor"] == F("gps")) {
+    // ...
+  }
+
+#else
+
+#warning PROGMEM is not supported on this platform
+
+#endif
+}
+
+void loop() {
+  // not used in this example
+}
+
+// See also
+// --------
+//
+// The website arduinojson.org contains the documentation for all the functions
+// used above. It also includes an FAQ that will help you solve any memory
+// problem.
+// Please check it out at: https://arduinojson.org/
+//
+// The book "Mastering ArduinoJson" contains a quick C++ course that explains
+// how your microcontroller stores strings in memory. It also tells why you
+// should not abuse Flash strings with ArduinoJson.
+// Please check it out at: https://arduinojson.org/book/

lib/ArduinoJson/examples/StringExample/StringExample.ino

@@ -0,0 +1,74 @@
+// ArduinoJson - arduinojson.org
+// Copyright Benoit Blanchon 2014-2018
+// MIT License
+//
+// This example shows the different ways you can use String with ArduinoJson.
+//
+// Use String objects sparingly, because ArduinoJson duplicates them in the
+// JsonBuffer. Prefer plain old char[], as they are more efficient in term of
+// code size, speed, and memory usage.
+
+#include <ArduinoJson.h>
+
+void setup() {
+  DynamicJsonBuffer jsonBuffer;
+
+  // You can use a String as your JSON input.
+  // WARNING: the content of the String will be duplicated in the JsonBuffer.
+  String input =
+      "{\"sensor\":\"gps\",\"time\":1351824120,\"data\":[48.756080,2.302038]}";
+  JsonObject& root = jsonBuffer.parseObject(input);
+
+  // You can use a String to get an element of a JsonObject
+  // No duplication is done.
+  long time = root[String("time")];
+
+  // You can use a String to set an element of a JsonObject
+  // WARNING: the content of the String will be duplicated in the JsonBuffer.
+  root[String("time")] = time;
+
+  // You can get a String from a JsonObject or JsonArray:
+  // No duplication is done, at least not in the JsonBuffer.
+  String sensor = root["sensor"];
+
+  // Unfortunately, the following doesn't work (issue #118):
+  // sensor = root["sensor"]; // <-  error "ambiguous overload for 'operator='"
+  // As a workaround, you need to replace by:
+  sensor = root["sensor"].as<String>();
+
+  // You can set a String to a JsonObject or JsonArray:
+  // WARNING: the content of the String will be duplicated in the JsonBuffer.
+  root["sensor"] = sensor;
+
+  // It works with RawJson too:
+  root["sensor"] = RawJson(sensor);
+
+  // You can also concatenate strings
+  // WARNING: the content of the String will be duplicated in the JsonBuffer.
+  root[String("sen") + "sor"] = String("gp") + "s";
+
+  // You can compare the content of a JsonObject with a String
+  if (root["sensor"] == sensor) {
+    // ...
+  }
+
+  // Lastly, you can print the resulting JSON to a String
+  String output;
+  root.printTo(output);
+}
+
+void loop() {
+  // not used in this example
+}
+
+// See also
+// --------
+//
+// The website arduinojson.org contains the documentation for all the functions
+// used above. It also includes an FAQ that will help you solve any problem.
+// Please check it out at: https://arduinojson.org/
+//
+// The book "Mastering ArduinoJson" contains a quick C++ course that explains
+// how your microcontroller stores strings in memory. On several occasions, it
+// shows how you can avoid String in your program.
+// Please check it out at: https://arduinojson.org/book/

lib/ArduinoJson/fuzzing/Makefile

@@ -0,0 +1,19 @@
+# CAUTION: this file is invoked by https://github.com/google/oss-fuzz
+
+CXXFLAGS += -I../src
+
+all: \
+	$(OUT)/json_fuzzer \
+	$(OUT)/json_fuzzer_seed_corpus.zip \
+	$(OUT)/json_fuzzer.options
+
+$(OUT)/json_fuzzer: fuzzer.cpp $(shell find ../src -type f)
+	$(CXX) $(CXXFLAGS) $< -o$@ $(LIB_FUZZING_ENGINE)
+
+$(OUT)/json_fuzzer_seed_corpus.zip: seed_corpus/*
+	zip -j $@ $?
+
+$(OUT)/json_fuzzer.options:
+	@echo "[libfuzzer]" > $@
+	@echo "max_len = 256" >> $@
+	@echo "timeout = 10" >> $@

lib/ArduinoJson/fuzzing/fuzzer.cpp

@@ -0,0 +1,26 @@
+#include <ArduinoJson.h>
+
+class memstream : public std::istream {
+  struct membuf : std::streambuf {
+    membuf(const uint8_t *p, size_t l) {
+      setg((char *)p, (char *)p, (char *)p + l);
+    }
+  };
+  membuf _buffer;
+
+ public:
+  memstream(const uint8_t *p, size_t l)
+      : std::istream(&_buffer), _buffer(p, l) {
+    rdbuf(&_buffer);
+  }
+};
+
+extern "C" int LLVMFuzzerTestOneInput(const uint8_t *data, size_t size) {
+  DynamicJsonBuffer jsonBuffer;
+  memstream json(data, size);
+  JsonVariant variant = jsonBuffer.parse(json);
+  if (variant.success()) {
+    variant.as<std::string>();  // <- serialize to JSON
+  }
+  return 0;
+}

lib/ArduinoJson/fuzzing/my_corpus/.gitignore

@@ -0,0 +1,2 @@
+*
+!.gitignore

lib/ArduinoJson/fuzzing/seed_corpus/Comments.json

@@ -0,0 +1,10 @@
+//comment
+/*comment*/
+[ //comment
+/*comment*/"comment"/*comment*/,//comment
+/*comment*/{//comment
+/* comment*/"key"//comment
+: //comment
+"value"//comment
+}/*comment*/
+]//comment

lib/ArduinoJson/fuzzing/seed_corpus/EmptyArray.json

@@ -0,0 +1 @@
+[]

lib/ArduinoJson/fuzzing/seed_corpus/EmptyObject.json

@@ -0,0 +1 @@
+{}

lib/ArduinoJson/fuzzing/seed_corpus/ExcessiveNesting.json

@@ -0,0 +1 @@
+[1,[2,[3,[4,[5,[6,[7,[8,[9,[10,[11,[12,[13,[14,[15,[16,[17,[18,[19,[20,[21,[22,[23,[24,[25,[26,[27,[28,[29,[30,[31,[32,[33,[34,[35,[36,[37,[38,[39,[40,[41,[42,[43,[44,[45,[46,[47,[48,[49,[50,[51,[52,[53,[54,[55,[56,[57,[58,[59,[60,[61,[62,[63,[64,[65,[66,[67,[68,[69,[70,[71,[72,[73,[74,[75,[76,[77,[78,[79,[80,[81,[82,[83,[84,[85,[86,[87,[88,[89,[90,[91,[92,[93,[94,[95,[96,[97,[98,[99,[100,[101,[102,[103,[104,[105,[106,[107,[108,[109,[110,[111,[112,[113,[114,[115,[116,[117,[118,[119,[120]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

lib/ArduinoJson/fuzzing/seed_corpus/Numbers.json

@@ -0,0 +1,24 @@
+[
+  123,
+  -123,
+  123.456,
+  -123.456,
+  12e34,
+  12e-34,
+  12e+34,
+  12E34,
+  12E-34,
+  12E+34,
+  12.34e56,
+  12.34e-56,
+  12.34e+56,
+  12.34E56,
+  12.34E-56,
+  12.34E+56,
+  NaN,
+  -NaN,
+  +NaN,
+  Infinity,
+  +Infinity,
+  -Infinity
+]

lib/ArduinoJson/fuzzing/seed_corpus/OpenWeatherMap.json

@@ -0,0 +1,53 @@
+{
+  "coord": {
+    "lon": -0.13,
+    "lat": 51.51
+  },
+  "weather": [
+    {
+      "id": 301,
+      "main": "Drizzle",
+      "description": "drizzle",
+      "icon": "09n"
+    },
+    {
+      "id": 701,
+      "main": "Mist",
+      "description": "mist",
+      "icon": "50n"
+    },
+    {
+      "id": 741,
+      "main": "Fog",
+      "description": "fog",
+      "icon": "50n"
+    }
+  ],
+  "base": "stations",
+  "main": {
+    "temp": 281.87,
+    "pressure": 1032,
+    "humidity": 100,
+    "temp_min": 281.15,
+    "temp_max": 283.15
+  },
+  "visibility": 2900,
+  "wind": {
+    "speed": 1.5
+  },
+  "clouds": {
+    "all": 90
+  },
+  "dt": 1483820400,
+  "sys": {
+    "type": 1,
+    "id": 5091,
+    "message": 0.0226,
+    "country": "GB",
+    "sunrise": 1483776245,
+    "sunset": 1483805443
+  },
+  "id": 2643743,
+  "name": "London",
+  "cod": 200
+}

lib/ArduinoJson/fuzzing/seed_corpus/Strings.json

@@ -0,0 +1,8 @@
+[
+  "hello",
+  'hello',
+  hello,
+  {"hello":"world"},
+  {'hello':'world'},
+  {hello:world}
+]

lib/ArduinoJson/fuzzing/seed_corpus/WeatherUnderground.json

@@ -0,0 +1,90 @@
+{
+  "response": {
+    "version": "0.1",
+    "termsofService": "http://www.wunderground.com/weather/api/d/terms.html",
+    "features": {
+      "conditions": 1
+    }
+  },
+  "current_observation": {
+    "image": {
+      "url": "http://icons-ak.wxug.com/graphics/wu2/logo_130x80.png",
+      "title": "Weather Underground",
+      "link": "http://www.wunderground.com"
+    },
+    "display_location": {
+      "full": "San Francisco, CA",
+      "city": "San Francisco",
+      "state": "CA",
+      "state_name": "California",
+      "country": "US",
+      "country_iso3166": "US",
+      "zip": "94101",
+      "latitude": "37.77500916",
+      "longitude": "-122.41825867",
+      "elevation": "47.00000000"
+    },
+    "observation_location": {
+      "full": "SOMA - Near Van Ness, San Francisco, California",
+      "city": "SOMA - Near Van Ness, San Francisco",
+      "state": "California",
+      "country": "US",
+      "country_iso3166": "US",
+      "latitude": "37.773285",
+      "longitude": "-122.417725",
+      "elevation": "49 ft"
+    },
+    "estimated": {},
+    "station_id": "KCASANFR58",
+    "observation_time": "Last Updated on June 27, 5:27 PM PDT",
+    "observation_time_rfc822": "Wed, 27 Jun 2012 17:27:13 -0700",
+    "observation_epoch": "1340843233",
+    "local_time_rfc822": "Wed, 27 Jun 2012 17:27:14 -0700",
+    "local_epoch": "1340843234",
+    "local_tz_short": "PDT",
+    "local_tz_long": "America/Los_Angeles",
+    "local_tz_offset": "-0700",
+    "weather": "Partly Cloudy",
+    "temperature_string": "66.3 F (19.1 C)",
+    "temp_f": 66.3,
+    "temp_c": 19.1,
+    "relative_humidity": "65%",
+    "wind_string": "From the NNW at 22.0 MPH Gusting to 28.0 MPH",
+    "wind_dir": "NNW",
+    "wind_degrees": 346,
+    "wind_mph": 22,
+    "wind_gust_mph": "28.0",
+    "wind_kph": 35.4,
+    "wind_gust_kph": "45.1",
+    "pressure_mb": "1013",
+    "pressure_in": "29.93",
+    "pressure_trend": "+",
+    "dewpoint_string": "54 F (12 C)",
+    "dewpoint_f": 54,
+    "dewpoint_c": 12,
+    "heat_index_string": "NA",
+    "heat_index_f": "NA",
+    "heat_index_c": "NA",
+    "windchill_string": "NA",
+    "windchill_f": "NA",
+    "windchill_c": "NA",
+    "feelslike_string": "66.3 F (19.1 C)",
+    "feelslike_f": "66.3",
+    "feelslike_c": "19.1",
+    "visibility_mi": "10.0",
+    "visibility_km": "16.1",
+    "solarradiation": "",
+    "UV": "5",
+    "precip_1hr_string": "0.00 in ( 0 mm)",
+    "precip_1hr_in": "0.00",
+    "precip_1hr_metric": " 0",
+    "precip_today_string": "0.00 in (0 mm)",
+    "precip_today_in": "0.00",
+    "precip_today_metric": "0",
+    "icon": "partlycloudy",
+    "icon_url": "http://icons-ak.wxug.com/i/c/k/partlycloudy.gif",
+    "forecast_url": "http://www.wunderground.com/US/CA/San_Francisco.html",
+    "history_url": "http://www.wunderground.com/history/airport/KCASANFR58/2012/6/27/DailyHistory.html",
+    "ob_url": "http://www.wunderground.com/cgi-bin/findweather/getForecast?query=37.773285,-122.417725"
+  }
+}

lib/ArduinoJson/include/ArduinoJson.h

@@ -1,9 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#include "ArduinoJson.hpp"
-using namespace ArduinoJson;

lib/ArduinoJson/include/ArduinoJson.hpp

@@ -1,21 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include "ArduinoJson/DynamicJsonBuffer.hpp"
-#include "ArduinoJson/JsonArray.hpp"
-#include "ArduinoJson/JsonObject.hpp"
-#include "ArduinoJson/StaticJsonBuffer.hpp"
-
-#include "ArduinoJson/Internals/JsonParser.ipp"
-#include "ArduinoJson/JsonArray.ipp"
-#include "ArduinoJson/JsonBuffer.ipp"
-#include "ArduinoJson/JsonObject.ipp"
-#include "ArduinoJson/JsonVariant.ipp"
-
-using namespace ArduinoJson;

lib/ArduinoJson/include/ArduinoJson/Configuration.hpp

@@ -1,89 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#ifdef ARDUINO  // assume this is an embedded platform
-
-// store using float instead of double to reduce the memory usage (issue #134)
-#ifndef ARDUINOJSON_USE_DOUBLE
-#define ARDUINOJSON_USE_DOUBLE 0
-#endif
-
-// store using a long because it usually match the size of a float.
-#ifndef ARDUINOJSON_USE_LONG_LONG
-#define ARDUINOJSON_USE_LONG_LONG 0
-#endif
-#ifndef ARDUINOJSON_USE_INT64
-#define ARDUINOJSON_USE_INT64 0
-#endif
-
-// arduino has its own implementation of String to replace std::string
-#ifndef ARDUINOJSON_USE_ARDUINO_STRING
-#define ARDUINOJSON_USE_ARDUINO_STRING 1
-#endif
-
-// arduino doesn't support STL stream
-#ifndef ARDUINOJSON_ENABLE_STD_STREAM
-#define ARDUINOJSON_ENABLE_STD_STREAM 0
-#endif
-
-#ifndef ARDUINOJSON_ENABLE_ALIGNMENT
-#ifdef ARDUINO_ARCH_AVR
-// alignment isn't needed for 8-bit AVR
-#define ARDUINOJSON_ENABLE_ALIGNMENT 0
-#else
-// but must processor needs pointer to be align on word size
-#define ARDUINOJSON_ENABLE_ALIGNMENT 1
-#endif
-#endif
-
-#else  // assume this is a computer
-
-// on a computer we have plenty of memory so we can use doubles
-#ifndef ARDUINOJSON_USE_DOUBLE
-#define ARDUINOJSON_USE_DOUBLE 1
-#endif
-
-// use long long when available
-#ifndef ARDUINOJSON_USE_LONG_LONG
-#if __cplusplus >= 201103L || (defined(_MSC_VER) && _MSC_VER >= 1800)
-#define ARDUINOJSON_USE_LONG_LONG 1
-#else
-#define ARDUINOJSON_USE_LONG_LONG 0
-#endif
-#endif
-
-// use _int64 on old versions of Visual Studio
-#ifndef ARDUINOJSON_USE_INT64
-#if defined(_MSC_VER) && _MSC_VER <= 1700
-#define ARDUINOJSON_USE_INT64 1
-#else
-#define ARDUINOJSON_USE_INT64 0
-#endif
-#endif
-
-// on a computer, we can use std::string
-#ifndef ARDUINOJSON_USE_ARDUINO_STRING
-#define ARDUINOJSON_USE_ARDUINO_STRING 0
-#endif
-
-// on a computer, we can assume that the STL is there
-#ifndef ARDUINOJSON_ENABLE_STD_STREAM
-#define ARDUINOJSON_ENABLE_STD_STREAM 1
-#endif
-
-#ifndef ARDUINOJSON_ENABLE_ALIGNMENT
-// even if not required, most cpu's are faster with aligned pointers
-#define ARDUINOJSON_ENABLE_ALIGNMENT 1
-#endif
-
-#endif
-
-#if ARDUINOJSON_USE_LONG_LONG && ARDUINOJSON_USE_INT64
-#error ARDUINOJSON_USE_LONG_LONG and ARDUINOJSON_USE_INT64 cannot be set together
-#endif

lib/ArduinoJson/include/ArduinoJson/DynamicJsonBuffer.hpp

@@ -1,18 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include "Internals/BlockJsonBuffer.hpp"
-
-namespace ArduinoJson {
-// Implements a JsonBuffer with dynamic memory allocation.
-// You are strongly encouraged to consider using StaticJsonBuffer which is much
-// more suitable for embedded systems.
-typedef Internals::BlockJsonBuffer<Internals::DefaultAllocator>
-    DynamicJsonBuffer;
-}

lib/ArduinoJson/include/ArduinoJson/Internals/Comments.hpp

@@ -1,56 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-namespace ArduinoJson {
-namespace Internals {
-inline const char *skipCStyleComment(const char *ptr) {
-  ptr += 2;
-  for (;;) {
-    if (ptr[0] == '\0') return ptr;
-    if (ptr[0] == '*' && ptr[1] == '/') return ptr + 2;
-    ptr++;
-  }
-}
-
-inline const char *skipCppStyleComment(const char *ptr) {
-  ptr += 2;
-  for (;;) {
-    if (ptr[0] == '\0' || ptr[0] == '\n') return ptr;
-    ptr++;
-  }
-}
-
-inline const char *skipSpacesAndComments(const char *ptr) {
-  for (;;) {
-    switch (ptr[0]) {
-      case ' ':
-      case '\t':
-      case '\r':
-      case '\n':
-        ptr++;
-        continue;
-      case '/':
-        switch (ptr[1]) {
-          case '*':
-            ptr = skipCStyleComment(ptr);
-            break;
-          case '/':
-            ptr = skipCppStyleComment(ptr);
-            break;
-          default:
-            return ptr;
-        }
-        break;
-      default:
-        return ptr;
-    }
-  }
-}
-}
-}

lib/ArduinoJson/include/ArduinoJson/Internals/DummyPrint.hpp

@@ -1,21 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include "../Print.hpp"
-
-namespace ArduinoJson {
-namespace Internals {
-
-// A dummy Print implementation used in JsonPrintable::measureLength()
-class DummyPrint : public Print {
- public:
-  virtual size_t write(uint8_t) { return 1; }
-};
-}
-}

lib/ArduinoJson/include/ArduinoJson/Internals/DynamicStringBuilder.hpp

@@ -1,33 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include "../Print.hpp"
-#include "../String.hpp"
-
-namespace ArduinoJson {
-namespace Internals {
-
-// A Print implementation that allows to write in a String
-class DynamicStringBuilder : public Print {
- public:
-  DynamicStringBuilder(String &str) : _str(str) {}
-
-  virtual size_t write(uint8_t c) {
-    // Need to cast to char, otherwise String will print a number (issue #120)
-    _str += static_cast<char>(c);
-    return 1;
-  }
-
- private:
-  DynamicStringBuilder &operator=(const DynamicStringBuilder &);
-
-  String &_str;
-};
-}
-}

lib/ArduinoJson/include/ArduinoJson/Internals/JsonParser.hpp

@@ -1,66 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include "../JsonBuffer.hpp"
-#include "../JsonVariant.hpp"
-
-namespace ArduinoJson {
-namespace Internals {
-
-// Parse JSON string to create JsonArrays and JsonObjects
-// This internal class is not indended to be used directly.
-// Instead, use JsonBuffer.parseArray() or .parseObject()
-class JsonParser {
- public:
-  JsonParser(JsonBuffer *buffer, char *json, uint8_t nestingLimit)
-      : _buffer(buffer),
-        _readPtr(json ? json : ""),
-        _writePtr(json),
-        _nestingLimit(nestingLimit) {}
-
-  JsonArray &parseArray();
-  JsonObject &parseObject();
-
-  JsonVariant parseVariant() {
-    JsonVariant result;
-    parseAnythingTo(&result);
-    return result;
-  }
-
- private:
-  bool skip(char charToSkip);
-
-  const char *parseString();
-  bool parseAnythingTo(JsonVariant *destination);
-  FORCE_INLINE bool parseAnythingToUnsafe(JsonVariant *destination);
-
-  inline bool parseArrayTo(JsonVariant *destination);
-  inline bool parseObjectTo(JsonVariant *destination);
-  inline bool parseStringTo(JsonVariant *destination);
-
-  static inline bool isInRange(char c, char min, char max) {
-    return min <= c && c <= max;
-  }
-
-  static inline bool isLetterOrNumber(char c) {
-    return isInRange(c, '0', '9') || isInRange(c, 'a', 'z') ||
-           isInRange(c, 'A', 'Z') || c == '-' || c == '.';
-  }
-
-  static inline bool isQuote(char c) {
-    return c == '\'' || c == '\"';
-  }
-
-  JsonBuffer *_buffer;
-  const char *_readPtr;
-  char *_writePtr;
-  uint8_t _nestingLimit;
-};
-}
-}

lib/ArduinoJson/include/ArduinoJson/Internals/JsonParser.ipp

@@ -1,191 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include "Comments.hpp"
-#include "JsonParser.hpp"
-
-inline bool ArduinoJson::Internals::JsonParser::skip(char charToSkip) {
-  const char *ptr = skipSpacesAndComments(_readPtr);
-  if (*ptr != charToSkip) return false;
-  ptr++;
-  _readPtr = skipSpacesAndComments(ptr);
-  return true;
-}
-
-inline bool ArduinoJson::Internals::JsonParser::parseAnythingTo(
-    JsonVariant *destination) {
-  if (_nestingLimit == 0) return false;
-  _nestingLimit--;
-  bool success = parseAnythingToUnsafe(destination);
-  _nestingLimit++;
-  return success;
-}
-
-inline bool ArduinoJson::Internals::JsonParser::parseAnythingToUnsafe(
-    JsonVariant *destination) {
-  _readPtr = skipSpacesAndComments(_readPtr);
-
-  switch (*_readPtr) {
-    case '[':
-      return parseArrayTo(destination);
-
-    case '{':
-      return parseObjectTo(destination);
-
-    default:
-      return parseStringTo(destination);
-  }
-}
-
-inline ArduinoJson::JsonArray &
-ArduinoJson::Internals::JsonParser::parseArray() {
-  // Create an empty array
-  JsonArray &array = _buffer->createArray();
-
-  // Check opening braket
-  if (!skip('[')) goto ERROR_MISSING_BRACKET;
-  if (skip(']')) goto SUCCESS_EMPTY_ARRAY;
-
-  // Read each value
-  for (;;) {
-    // 1 - Parse value
-    JsonVariant value;
-    if (!parseAnythingTo(&value)) goto ERROR_INVALID_VALUE;
-    if (!array.add(value)) goto ERROR_NO_MEMORY;
-
-    // 2 - More values?
-    if (skip(']')) goto SUCCES_NON_EMPTY_ARRAY;
-    if (!skip(',')) goto ERROR_MISSING_COMMA;
-  }
-
-SUCCESS_EMPTY_ARRAY:
-SUCCES_NON_EMPTY_ARRAY:
-  return array;
-
-ERROR_INVALID_VALUE:
-ERROR_MISSING_BRACKET:
-ERROR_MISSING_COMMA:
-ERROR_NO_MEMORY:
-  return JsonArray::invalid();
-}
-
-inline bool ArduinoJson::Internals::JsonParser::parseArrayTo(
-    JsonVariant *destination) {
-  JsonArray &array = parseArray();
-  if (!array.success()) return false;
-
-  *destination = array;
-  return true;
-}
-
-inline ArduinoJson::JsonObject &
-ArduinoJson::Internals::JsonParser::parseObject() {
-  // Create an empty object
-  JsonObject &object = _buffer->createObject();
-
-  // Check opening brace
-  if (!skip('{')) goto ERROR_MISSING_BRACE;
-  if (skip('}')) goto SUCCESS_EMPTY_OBJECT;
-
-  // Read each key value pair
-  for (;;) {
-    // 1 - Parse key
-    const char *key = parseString();
-    if (!key) goto ERROR_INVALID_KEY;
-    if (!skip(':')) goto ERROR_MISSING_COLON;
-
-    // 2 - Parse value
-    JsonVariant value;
-    if (!parseAnythingTo(&value)) goto ERROR_INVALID_VALUE;
-    if (!object.set(key, value)) goto ERROR_NO_MEMORY;
-
-    // 3 - More keys/values?
-    if (skip('}')) goto SUCCESS_NON_EMPTY_OBJECT;
-    if (!skip(',')) goto ERROR_MISSING_COMMA;
-  }
-
-SUCCESS_EMPTY_OBJECT:
-SUCCESS_NON_EMPTY_OBJECT:
-  return object;
-
-ERROR_INVALID_KEY:
-ERROR_INVALID_VALUE:
-ERROR_MISSING_BRACE:
-ERROR_MISSING_COLON:
-ERROR_MISSING_COMMA:
-ERROR_NO_MEMORY:
-  return JsonObject::invalid();
-}
-
-inline bool ArduinoJson::Internals::JsonParser::parseObjectTo(
-    JsonVariant *destination) {
-  JsonObject &object = parseObject();
-  if (!object.success()) return false;
-
-  *destination = object;
-  return true;
-}
-
-inline const char *ArduinoJson::Internals::JsonParser::parseString() {
-  const char *readPtr = _readPtr;
-  char *writePtr = _writePtr;
-
-  char c = *readPtr;
-
-  if (isQuote(c)) {  // quotes
-    char stopChar = c;
-    for (;;) {
-      c = *++readPtr;
-      if (c == '\0') break;
-
-      if (c == stopChar) {
-        readPtr++;
-        break;
-      }
-
-      if (c == '\\') {
-        // replace char
-        c = Encoding::unescapeChar(*++readPtr);
-        if (c == '\0') break;
-      }
-
-      *writePtr++ = c;
-    }
-  } else {  // no quotes
-    for (;;) {
-      if (!isLetterOrNumber(c)) break;
-      *writePtr++ = c;
-      c = *++readPtr;
-    }
-  }
-  // end the string here
-  *writePtr++ = '\0';
-
-  const char *startPtr = _writePtr;
-
-  // update end ptr
-  _readPtr = readPtr;
-  _writePtr = writePtr;
-
-  // return pointer to unquoted string
-  return startPtr;
-}
-
-inline bool ArduinoJson::Internals::JsonParser::parseStringTo(
-    JsonVariant *destination) {
-  bool hasQuotes = isQuote(_readPtr[0]);
-  const char *value = parseString();
-  if (value == NULL) return false;
-  if (hasQuotes) {
-    *destination = value;
-  } else {
-    *destination = RawJson(value);
-  }
-  return true;
-}

lib/ArduinoJson/include/ArduinoJson/Internals/JsonVariantType.hpp

@@ -1,39 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-namespace ArduinoJson {
-class JsonArray;
-class JsonObject;
-
-namespace Internals {
-
-// Enumerated type to know the current type of a JsonVariant.
-// The value determines which member of JsonVariantContent is used.
-enum JsonVariantType {
-  JSON_UNDEFINED,         // JsonVariant has not been initialized
-  JSON_UNPARSED,          // JsonVariant contains an unparsed string
-  JSON_STRING,            // JsonVariant stores a const char*
-  JSON_BOOLEAN,           // JsonVariant stores a bool
-  JSON_POSITIVE_INTEGER,  // JsonVariant stores an unsigned long
-  JSON_NEGATIVE_INTEGER,  // JsonVariant stores an unsigned long that must be
-                          // negated
-  JSON_ARRAY,             // JsonVariant stores a pointer to a JsonArray
-  JSON_OBJECT,            // JsonVariant stores a pointer to a JsonObject
-
-  // The following values are reserved for float values
-  // Multiple values are used for double, depending on the number of decimal
-  // digits that must be printed in the JSON output.
-  // This little trick allow to save one extra member in JsonVariant
-  JSON_FLOAT_0_DECIMALS
-  // JSON_FLOAT_1_DECIMAL
-  // JSON_FLOAT_2_DECIMALS
-  // ...
-};
-}
-}

lib/ArduinoJson/include/ArduinoJson/Internals/JsonWriter.hpp

@@ -1,184 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include "../Polyfills/attributes.hpp"
-#include "../Polyfills/math.hpp"
-#include "../Polyfills/normalize.hpp"
-#include "../Print.hpp"
-#include "Encoding.hpp"
-#include "JsonFloat.hpp"
-#include "JsonInteger.hpp"
-
-namespace ArduinoJson {
-namespace Internals {
-
-// Writes the JSON tokens to a Print implementation
-// This class is used by:
-// - JsonArray::writeTo()
-// - JsonObject::writeTo()
-// - JsonVariant::writeTo()
-// Its derived by PrettyJsonWriter that overrides some members to add
-// indentation.
-class JsonWriter {
- public:
-  explicit JsonWriter(Print &sink) : _sink(sink), _length(0) {}
-
-  // Returns the number of bytes sent to the Print implementation.
-  // This is very handy for implementations of printTo() that must return the
-  // number of bytes written.
-  size_t bytesWritten() const {
-    return _length;
-  }
-
-  void beginArray() {
-    writeRaw('[');
-  }
-  void endArray() {
-    writeRaw(']');
-  }
-
-  void beginObject() {
-    writeRaw('{');
-  }
-  void endObject() {
-    writeRaw('}');
-  }
-
-  void writeColon() {
-    writeRaw(':');
-  }
-  void writeComma() {
-    writeRaw(',');
-  }
-
-  void writeBoolean(bool value) {
-    writeRaw(value ? "true" : "false");
-  }
-
-  void writeString(const char *value) {
-    if (!value) {
-      writeRaw("null");
-    } else {
-      writeRaw('\"');
-      while (*value) writeChar(*value++);
-      writeRaw('\"');
-    }
-  }
-
-  void writeChar(char c) {
-    char specialChar = Encoding::escapeChar(c);
-    if (specialChar) {
-      writeRaw('\\');
-      writeRaw(specialChar);
-    } else {
-      writeRaw(c);
-    }
-  }
-
-  void writeFloat(JsonFloat value, uint8_t digits = 2) {
-    if (Polyfills::isNaN(value)) return writeRaw("NaN");
-
-    if (value < 0.0) {
-      writeRaw('-');
-      value = -value;
-    }
-
-    if (Polyfills::isInfinity(value)) return writeRaw("Infinity");
-
-    short powersOf10;
-    if (value > 1000 || value < 0.001) {
-      powersOf10 = Polyfills::normalize(value);
-    } else {
-      powersOf10 = 0;
-    }
-
-    // Round up last digit (so that print(1.999, 2) prints as "2.00")
-    value += getRoundingBias(digits);
-
-    // Extract the integer part of the value and print it
-    JsonUInt int_part = static_cast<JsonUInt>(value);
-    JsonFloat remainder = value - static_cast<JsonFloat>(int_part);
-    writeInteger(int_part);
-
-    // Print the decimal point, but only if there are digits beyond
-    if (digits > 0) {
-      writeRaw('.');
-    }
-
-    // Extract digits from the remainder one at a time
-    while (digits-- > 0) {
-      // Extract digit
-      remainder *= 10.0;
-      char currentDigit = char(remainder);
-      remainder -= static_cast<JsonFloat>(currentDigit);
-
-      // Print
-      writeRaw(char('0' + currentDigit));
-    }
-
-    if (powersOf10 < 0) {
-      writeRaw("e-");
-      writeInteger(-powersOf10);
-    }
-
-    if (powersOf10 > 0) {
-      writeRaw('e');
-      writeInteger(powersOf10);
-    }
-  }
-
-  void writeInteger(JsonUInt value) {
-    char buffer[22];
-    char *ptr = buffer + sizeof(buffer) - 1;
-
-    *ptr = 0;
-    do {
-      *--ptr = static_cast<char>(value % 10 + '0');
-      value /= 10;
-    } while (value);
-
-    writeRaw(ptr);
-  }
-
-  void writeRaw(const char *s) {
-    _length += _sink.print(s);
-  }
-  void writeRaw(char c) {
-    _length += _sink.write(c);
-  }
-
- protected:
-  Print &_sink;
-  size_t _length;
-
- private:
-  JsonWriter &operator=(const JsonWriter &);  // cannot be assigned
-
-  static JsonFloat getLastDigit(uint8_t digits) {
-    // Designed as a compromise between code size and speed
-    switch (digits) {
-      case 0:
-        return 1e-0;
-      case 1:
-        return 1e-1;
-      case 2:
-        return 1e-2;
-      case 3:
-        return 1e-3;
-      default:
-        return getLastDigit(uint8_t(digits - 4)) * 1e-4;
-    }
-  }
-
-  FORCE_INLINE static JsonFloat getRoundingBias(uint8_t digits) {
-    return 0.5 * getLastDigit(digits);
-  }
-};
-}
-}

lib/ArduinoJson/include/ArduinoJson/Internals/Parse.hpp

@@ -1,66 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include <stdlib.h>
-
-namespace ArduinoJson {
-namespace Internals {
-template <typename TFloat>
-TFloat parse(const char *);
-
-template <>
-inline float parse<float>(const char *s) {
-  return static_cast<float>(strtod(s, NULL));
-}
-
-template <>
-inline double parse<double>(const char *s) {
-  return strtod(s, NULL);
-}
-
-template <>
-inline long parse<long>(const char *s) {
-  return strtol(s, NULL, 10);
-}
-
-template <>
-inline unsigned long parse<unsigned long>(const char *s) {
-  return strtoul(s, NULL, 10);
-}
-
-template <>
-inline int parse<int>(const char *s) {
-  return atoi(s);
-}
-
-#if ARDUINOJSON_USE_LONG_LONG
-template <>
-inline long long parse<long long>(const char *s) {
-  return strtoll(s, NULL, 10);
-}
-
-template <>
-inline unsigned long long parse<unsigned long long>(const char *s) {
-  return strtoull(s, NULL, 10);
-}
-#endif
-
-#if ARDUINOJSON_USE_INT64
-template <>
-inline __int64 parse<__int64>(const char *s) {
-  return _strtoi64(s, NULL, 10);
-}
-
-template <>
-inline unsigned __int64 parse<unsigned __int64>(const char *s) {
-  return _strtoui64(s, NULL, 10);
-}
-#endif
-}
-}

lib/ArduinoJson/include/ArduinoJson/Internals/ReferenceType.hpp

@@ -1,35 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-namespace ArduinoJson {
-namespace Internals {
-
-// A type that is meant to be used by reference only (JsonArray and JsonObject)
-class ReferenceType {
- public:
-  bool operator==(const ReferenceType& other) const {
-    // two JsonArray are equal if they are the same instance
-    // (we don't compare the content)
-    return this == &other;
-  }
-
-  bool operator!=(const ReferenceType& other) const { return this != &other; }
-
- protected:
-  ReferenceType() {}
-
- private:
-  // copy constructor is private
-  ReferenceType(const ReferenceType&);
-
-  // copy operator is private
-  ReferenceType& operator=(const ReferenceType&);
-};
-}
-}

lib/ArduinoJson/include/ArduinoJson/Internals/StaticStringBuilder.hpp

@@ -1,37 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include "../Print.hpp"
-
-namespace ArduinoJson {
-namespace Internals {
-
-// A Print implementation that allows to write in a char[]
-class StaticStringBuilder : public Print {
- public:
-  StaticStringBuilder(char *buf, size_t size)
-      : buffer(buf), capacity(size - 1), length(0) {
-    buffer[0] = '\0';
-  }
-
-  virtual size_t write(uint8_t c) {
-    if (length >= capacity) return 0;
-
-    buffer[length++] = c;
-    buffer[length] = '\0';
-    return 1;
-  }
-
- private:
-  char *buffer;
-  size_t capacity;
-  size_t length;
-};
-}
-}

lib/ArduinoJson/include/ArduinoJson/JsonArray.hpp

@@ -1,268 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include "Internals/JsonBufferAllocated.hpp"
-#include "Internals/JsonPrintable.hpp"
-#include "Internals/List.hpp"
-#include "Internals/ReferenceType.hpp"
-#include "JsonVariant.hpp"
-#include "TypeTraits/EnableIf.hpp"
-#include "TypeTraits/IsFloatingPoint.hpp"
-#include "TypeTraits/IsReference.hpp"
-#include "TypeTraits/IsSame.hpp"
-
-// Returns the size (in bytes) of an array with n elements.
-// Can be very handy to determine the size of a StaticJsonBuffer.
-#define JSON_ARRAY_SIZE(NUMBER_OF_ELEMENTS) \
-  (sizeof(JsonArray) + (NUMBER_OF_ELEMENTS) * sizeof(JsonArray::node_type))
-
-namespace ArduinoJson {
-
-// Forward declarations
-class JsonObject;
-class JsonBuffer;
-class JsonArraySubscript;
-
-// An array of JsonVariant.
-//
-// The constructor is private, instances must be created via
-// JsonBuffer::createArray() or JsonBuffer::parseArray().
-// A JsonArray can be serialized to a JSON string via JsonArray::printTo().
-// It can also be deserialized from a JSON string via JsonBuffer::parseArray().
-class JsonArray : public Internals::JsonPrintable<JsonArray>,
-                  public Internals::ReferenceType,
-                  public Internals::List<JsonVariant>,
-                  public Internals::JsonBufferAllocated {
- public:
-  // A meta-function that returns true if type T can be used in
-  // JsonArray::set()
-  template <typename T>
-  struct CanSet {
-    static const bool value = JsonVariant::IsConstructibleFrom<T>::value ||
-                              TypeTraits::IsSame<T, String &>::value ||
-                              TypeTraits::IsSame<T, const String &>::value;
-  };
-
-  // Create an empty JsonArray attached to the specified JsonBuffer.
-  // You should not call this constructor directly.
-  // Instead, use JsonBuffer::createArray() or JsonBuffer::parseArray().
-  explicit JsonArray(JsonBuffer *buffer)
-      : Internals::List<JsonVariant>(buffer) {}
-
-  // Gets the value at the specified index
-  JsonVariant operator[](size_t index) const {
-    return get(index);
-  }
-
-  // Gets or sets the value at specified index
-  JsonArraySubscript operator[](size_t index);
-
-  // Adds the specified value at the end of the array.
-  //
-  // bool add(bool);
-  // bool add(char);
-  // bool add(long);
-  // bool add(int);
-  // bool add(short);
-  // bool add(float value);
-  // bool add(double value);
-  // bool add(const char*);
-  template <typename T>
-  bool add(
-      T value,
-      typename TypeTraits::EnableIf<
-          CanSet<T>::value && !TypeTraits::IsReference<T>::value>::type * = 0) {
-    return addNode<T>(value);
-  }
-  // bool add(const String&)
-  // bool add(const JsonVariant&);
-  // bool add(JsonArray&);
-  // bool add(JsonObject&);
-  template <typename T>
-  bool add(const T &value,
-           typename TypeTraits::EnableIf<CanSet<T &>::value>::type * = 0) {
-    return addNode<T &>(const_cast<T &>(value));
-  }
-  // bool add(float value, uint8_t decimals);
-  // bool add(double value, uint8_t decimals);
-  template <typename T>
-  bool add(T value, uint8_t decimals,
-           typename TypeTraits::EnableIf<
-               TypeTraits::IsFloatingPoint<T>::value>::type * = 0) {
-    return addNode<JsonVariant>(JsonVariant(value, decimals));
-  }
-
-  // Sets the value at specified index.
-  //
-  // bool set(size_t index, bool value);
-  // bool set(size_t index, long value);
-  // bool set(size_t index, int value);
-  // bool set(size_t index, short value);
-  template <typename T>
-  bool set(
-      size_t index, T value,
-      typename TypeTraits::EnableIf<
-          CanSet<T>::value && !TypeTraits::IsReference<T>::value>::type * = 0) {
-    return setNodeAt<T>(index, value);
-  }
-  // bool set(size_t index, const String&)
-  // bool set(size_t index, const JsonVariant&);
-  // bool set(size_t index, JsonArray&);
-  // bool set(size_t index, JsonObject&);
-  template <typename T>
-  bool set(size_t index, const T &value,
-           typename TypeTraits::EnableIf<CanSet<T &>::value>::type * = 0) {
-    return setNodeAt<T &>(index, const_cast<T &>(value));
-  }
-  // bool set(size_t index, float value, uint8_t decimals = 2);
-  // bool set(size_t index, double value, uint8_t decimals = 2);
-  template <typename T>
-  bool set(size_t index, T value, uint8_t decimals,
-           typename TypeTraits::EnableIf<
-               TypeTraits::IsFloatingPoint<T>::value>::type * = 0) {
-    return setNodeAt<const JsonVariant &>(index, JsonVariant(value, decimals));
-  }
-
-  // Gets the value at the specified index.
-  JsonVariant get(size_t index) const {
-    node_type *node = getNodeAt(index);
-    return node ? node->content : JsonVariant();
-  }
-
-  // Gets the value at the specified index.
-  template <typename T>
-  typename Internals::JsonVariantAs<T>::type get(size_t index) const {
-    node_type *node = getNodeAt(index);
-    return node ? node->content.as<T>() : JsonVariant::defaultValue<T>();
-  }
-
-  // Check the type of the value at specified index.
-  template <typename T>
-  bool is(size_t index) const {
-    node_type *node = getNodeAt(index);
-    return node ? node->content.is<T>() : false;
-  }
-
-  // Creates a JsonArray and adds a reference at the end of the array.
-  // It's a shortcut for JsonBuffer::createArray() and JsonArray::add()
-  JsonArray &createNestedArray();
-
-  // Creates a JsonObject and adds a reference at the end of the array.
-  // It's a shortcut for JsonBuffer::createObject() and JsonArray::add()
-  JsonObject &createNestedObject();
-
-  // Removes element at specified index.
-  void removeAt(size_t index) {
-    removeNode(getNodeAt(index));
-  }
-
-  // Returns a reference an invalid JsonArray.
-  // This object is meant to replace a NULL pointer.
-  // This is used when memory allocation or JSON parsing fail.
-  static JsonArray &invalid() {
-    static JsonArray instance(NULL);
-    return instance;
-  }
-
-  // Serialize the array to the specified JsonWriter.
-  void writeTo(Internals::JsonWriter &writer) const {
-    writer.beginArray();
-
-    const node_type *child = _firstNode;
-    while (child) {
-      child->content.writeTo(writer);
-
-      child = child->next;
-      if (!child) break;
-
-      writer.writeComma();
-    }
-
-    writer.endArray();
-  }
-
-  // Imports a 1D array
-  template <typename T, size_t N>
-  bool copyFrom(T(&array)[N]) {
-    return copyFrom(array, N);
-  }
-
-  // Imports a 1D array
-  template <typename T>
-  bool copyFrom(T *array, size_t len) {
-    bool ok = true;
-    for (size_t i = 0; i < len; i++) {
-      ok &= add(array[i]);
-    }
-    return ok;
-  }
-
-  // Imports a 2D array
-  template <typename T, size_t N1, size_t N2>
-  bool copyFrom(T(&array)[N1][N2]) {
-    bool ok = true;
-    for (size_t i = 0; i < N1; i++) {
-      JsonArray &nestedArray = createNestedArray();
-      for (size_t j = 0; j < N2; j++) {
-        ok &= nestedArray.add(array[i][j]);
-      }
-    }
-    return ok;
-  }
-
-  // Exports a 1D array
-  template <typename T, size_t N>
-  size_t copyTo(T(&array)[N]) const {
-    return copyTo(array, N);
-  }
-
-  // Exports a 1D array
-  template <typename T>
-  size_t copyTo(T *array, size_t len) const {
-    size_t i = 0;
-    for (const_iterator it = begin(); it != end() && i < len; ++it)
-      array[i++] = *it;
-    return i;
-  }
-
-  // Exports a 2D array
-  template <typename T, size_t N1, size_t N2>
-  void copyTo(T(&array)[N1][N2]) const {
-    size_t i = 0;
-    for (const_iterator it = begin(); it != end() && i < N1; ++it) {
-      it->asArray().copyTo(array[i++]);
-    }
-  }
-
- private:
-  node_type *getNodeAt(size_t index) const {
-    node_type *node = _firstNode;
-    while (node && index--) node = node->next;
-    return node;
-  }
-
-  template <typename TValue>
-  bool setNodeAt(size_t index, TValue value) {
-    node_type *node = getNodeAt(index);
-    return node != NULL && setNodeValue<TValue>(node, value);
-  }
-
-  template <typename TValue>
-  bool addNode(TValue value) {
-    node_type *node = addNewNode();
-    return node != NULL && setNodeValue<TValue>(node, value);
-  }
-
-  template <typename T>
-  bool setNodeValue(node_type *node, T value) {
-    node->content = value;
-    return true;
-  }
-};
-}

lib/ArduinoJson/include/ArduinoJson/JsonArray.ipp

@@ -1,62 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include "JsonArray.hpp"
-#include "JsonObject.hpp"
-#include "JsonArraySubscript.hpp"
-
-namespace ArduinoJson {
-
-template <>
-inline bool JsonArray::setNodeValue(node_type *node, String &value) {
-  const char *copy = _buffer->strdup(value);
-  if (!copy) return false;
-  node->content = copy;
-  return true;
-}
-
-template <>
-inline JsonArray &JsonVariant::defaultValue<JsonArray>() {
-  return JsonArray::invalid();
-}
-
-template <>
-inline JsonArray &JsonVariant::defaultValue<JsonArray &>() {
-  return JsonArray::invalid();
-}
-
-template <>
-inline const JsonArray &JsonVariant::defaultValue<const JsonArray>() {
-  return JsonArray::invalid();
-}
-
-template <>
-inline const JsonArray &JsonVariant::defaultValue<const JsonArray &>() {
-  return JsonArray::invalid();
-}
-
-inline JsonArray &JsonVariant::asArray() const {
-  if (_type == Internals::JSON_ARRAY) return *_content.asArray;
-  return JsonArray::invalid();
-}
-
-inline JsonArray &JsonArray::createNestedArray() {
-  if (!_buffer) return JsonArray::invalid();
-  JsonArray &array = _buffer->createArray();
-  add(array);
-  return array;
-}
-
-inline JsonArray &JsonObject::createNestedArray(JsonObjectKey key) {
-  if (!_buffer) return JsonArray::invalid();
-  JsonArray &array = _buffer->createArray();
-  setNodeAt<const JsonVariant &>(key, array);
-  return array;
-}
-}

lib/ArduinoJson/include/ArduinoJson/JsonArraySubscript.hpp

@@ -1,98 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include "Configuration.hpp"
-#include "JsonVariantBase.hpp"
-
-#ifdef _MSC_VER
-#pragma warning(push)
-#pragma warning(disable : 4522)
-#endif
-
-namespace ArduinoJson {
-class JsonArraySubscript : public JsonVariantBase<JsonArraySubscript> {
- public:
-  FORCE_INLINE JsonArraySubscript(JsonArray& array, size_t index)
-      : _array(array), _index(index) {}
-
-  JsonArraySubscript& operator=(const JsonArraySubscript& src) {
-    _array.set<const JsonVariant&>(_index, src);
-    return *this;
-  }
-
-  template <typename T>
-  typename TypeTraits::EnableIf<JsonArray::CanSet<T&>::value,
-                                JsonArraySubscript>::type&
-  operator=(const T& src) {
-    _array.set<T&>(_index, const_cast<T&>(src));
-    return *this;
-  }
-
-  template <typename T>
-  typename TypeTraits::EnableIf<JsonArray::CanSet<T>::value,
-                                JsonArraySubscript>::type&
-  operator=(T src) {
-    _array.set<T>(_index, src);
-    return *this;
-  }
-
-  FORCE_INLINE bool success() const {
-    return _index < _array.size();
-  }
-
-  FORCE_INLINE operator JsonVariant() const {
-    return _array.get(_index);
-  }
-
-  template <typename T>
-  FORCE_INLINE typename Internals::JsonVariantAs<T>::type as() const {
-    return _array.get<T>(_index);
-  }
-
-  template <typename T>
-  FORCE_INLINE bool is() const {
-    return _array.is<T>(_index);
-  }
-
-  void writeTo(Internals::JsonWriter& writer) const {
-    _array.get(_index).writeTo(writer);
-  }
-
-  template <typename TValue>
-  void set(TValue value) {
-    _array.set(_index, value);
-  }
-
- private:
-  JsonArray& _array;
-  const size_t _index;
-};
-
-#if ARDUINOJSON_ENABLE_STD_STREAM
-inline std::ostream& operator<<(std::ostream& os,
-                                const JsonArraySubscript& source) {
-  return source.printTo(os);
-}
-#endif
-
-inline JsonArraySubscript JsonArray::operator[](size_t index) {
-  return JsonArraySubscript(*this, index);
-}
-
-template <typename TImplem>
-inline const JsonArraySubscript JsonVariantBase<TImplem>::operator[](
-    int index) const {
-  return asArray()[index];
-}
-
-}  // namespace ArduinoJson
-
-#ifdef _MSC_VER
-#pragma warning(pop)
-#endif

lib/ArduinoJson/include/ArduinoJson/JsonBuffer.hpp

@@ -1,163 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include <stddef.h>  // for size_t
-#include <stdint.h>  // for uint8_t
-#include <string.h>
-
-#include "JsonVariant.hpp"
-#include "String.hpp"
-
-#if defined(__clang__)
-#pragma clang diagnostic push
-#pragma clang diagnostic ignored "-Wnon-virtual-dtor"
-#elif defined(__GNUC__)
-#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
-#pragma GCC diagnostic push
-#endif
-#pragma GCC diagnostic ignored "-Wnon-virtual-dtor"
-#endif
-
-namespace ArduinoJson {
-class JsonArray;
-class JsonObject;
-
-// Entry point for using the library.
-//
-// Handle the memory management (done in derived classes) and calls the parser.
-// This abstract class is implemented by StaticJsonBuffer which implements a
-// fixed memory allocation.
-class JsonBuffer {
- public:
-  // CAUTION: NO VIRTUAL DESTRUCTOR!
-  // If we add a virtual constructor the Arduino compiler will add malloc() and
-  // free() to the binary, adding 706 useless bytes.
-  // virtual ~JsonBuffer() {}
-
-  // Allocates an empty JsonArray.
-  //
-  // Returns a reference to the new JsonArray or JsonArray::invalid() if the
-  // allocation fails.
-  JsonArray &createArray();
-
-  // Allocates an empty JsonObject.
-  //
-  // Returns a reference to the new JsonObject or JsonObject::invalid() if the
-  // allocation fails.
-  JsonObject &createObject();
-
-  // Allocates and populate a JsonArray from a JSON string.
-  //
-  // The First argument is a pointer to the JSON string, the memory must be
-  // writable
-  // because the parser will insert null-terminators and replace escaped chars.
-  //
-  // The second argument set the nesting limit (see comment on DEFAULT_LIMIT)
-  //
-  // Returns a reference to the new JsonObject or JsonObject::invalid() if the
-  // allocation fails.
-  JsonArray &parseArray(char *json, uint8_t nestingLimit = DEFAULT_LIMIT);
-
-  // Same with a const char*.
-  // With this overload, the JsonBuffer will make a copy of the string
-  JsonArray &parseArray(const char *json, uint8_t nesting = DEFAULT_LIMIT) {
-    return parseArray(strdup(json), nesting);
-  }
-
-  // Same as above with a String class
-  JsonArray &parseArray(const String &json, uint8_t nesting = DEFAULT_LIMIT) {
-    return parseArray(json.c_str(), nesting);
-  }
-
-  // Allocates and populate a JsonObject from a JSON string.
-  //
-  // The First argument is a pointer to the JSON string, the memory must be
-  // writable
-  // because the parser will insert null-terminators and replace escaped chars.
-  //
-  // The second argument set the nesting limit (see comment on DEFAULT_LIMIT)
-  //
-  // Returns a reference to the new JsonObject or JsonObject::invalid() if the
-  // allocation fails.
-  JsonObject &parseObject(char *json, uint8_t nestingLimit = DEFAULT_LIMIT);
-
-  // Same with a const char*.
-  // With this overload, the JsonBuffer will make a copy of the string
-  JsonObject &parseObject(const char *json, uint8_t nesting = DEFAULT_LIMIT) {
-    return parseObject(strdup(json), nesting);
-  }
-
-  // Same as above with a String class
-  JsonObject &parseObject(const String &json, uint8_t nesting = DEFAULT_LIMIT) {
-    return parseObject(json.c_str(), nesting);
-  }
-
-  // Generalized version of parseArray() and parseObject(), also works for
-  // integral types.
-  JsonVariant parse(char *json, uint8_t nestingLimit = DEFAULT_LIMIT);
-
-  // Same with a const char*.
-  // With this overload, the JsonBuffer will make a copy of the string
-  JsonVariant parse(const char *json, uint8_t nesting = DEFAULT_LIMIT) {
-    return parse(strdup(json), nesting);
-  }
-
-  // Same as above with a String class
-  JsonVariant parse(const String &json, uint8_t nesting = DEFAULT_LIMIT) {
-    return parse(json.c_str(), nesting);
-  }
-
-  // Duplicate a string
-  char *strdup(const char *src) {
-    return src ? strdup(src, strlen(src)) : NULL;
-  }
-  char *strdup(const String &src) { return strdup(src.c_str(), src.length()); }
-
-  // Allocates n bytes in the JsonBuffer.
-  // Return a pointer to the allocated memory or NULL if allocation fails.
-  virtual void *alloc(size_t size) = 0;
-
- protected:
-  // Preserve aligment if nessary
-  static FORCE_INLINE size_t round_size_up(size_t bytes) {
-#if ARDUINOJSON_ENABLE_ALIGNMENT
-    const size_t x = sizeof(void *) - 1;
-    return (bytes + x) & ~x;
-#else
-    return bytes;
-#endif
-  }
-
- private:
-  char *strdup(const char *, size_t);
-
-  // Default value of nesting limit of parseArray() and parseObject().
-  //
-  // The nesting limit is a contain on the level of nesting allowed in the
-  // JSON
-  // string.
-  // If set to 0, only a flat array or objects can be parsed.
-  // If set to 1, the object can contain nested arrays or objects but only 1
-  // level deep.
-  // And bigger values will allow more level of nesting.
-  //
-  // The purpose of this feature is to prevent stack overflow that could
-  // lead to
-  // a security risk.
-  static const uint8_t DEFAULT_LIMIT = 10;
-};
-}
-
-#if defined(__clang__)
-#pragma clang diagnostic pop
-#elif defined(__GNUC__)
-#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
-#pragma GCC diagnostic pop
-#endif
-#endif

lib/ArduinoJson/include/ArduinoJson/JsonBuffer.ipp

@@ -1,46 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include "Internals/JsonParser.hpp"
-
-inline ArduinoJson::JsonArray &ArduinoJson::JsonBuffer::createArray() {
-  JsonArray *ptr = new (this) JsonArray(this);
-  return ptr ? *ptr : JsonArray::invalid();
-}
-
-inline ArduinoJson::JsonObject &ArduinoJson::JsonBuffer::createObject() {
-  JsonObject *ptr = new (this) JsonObject(this);
-  return ptr ? *ptr : JsonObject::invalid();
-}
-
-inline ArduinoJson::JsonArray &ArduinoJson::JsonBuffer::parseArray(
-    char *json, uint8_t nestingLimit) {
-  Internals::JsonParser parser(this, json, nestingLimit);
-  return parser.parseArray();
-}
-
-inline ArduinoJson::JsonObject &ArduinoJson::JsonBuffer::parseObject(
-    char *json, uint8_t nestingLimit) {
-  Internals::JsonParser parser(this, json, nestingLimit);
-  return parser.parseObject();
-}
-
-inline ArduinoJson::JsonVariant ArduinoJson::JsonBuffer::parse(
-    char *json, uint8_t nestingLimit) {
-  Internals::JsonParser parser(this, json, nestingLimit);
-  return parser.parseVariant();
-}
-
-inline char *ArduinoJson::JsonBuffer::strdup(const char *source,
-                                             size_t length) {
-  size_t size = length + 1;
-  char *dest = static_cast<char *>(alloc(size));
-  if (dest != NULL) memcpy(dest, source, size);
-  return dest;
-}

lib/ArduinoJson/include/ArduinoJson/JsonObject.hpp

@@ -1,201 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include "String.hpp"
-#include "Internals/JsonBufferAllocated.hpp"
-#include "Internals/JsonPrintable.hpp"
-#include "Internals/List.hpp"
-#include "Internals/ReferenceType.hpp"
-#include "JsonPair.hpp"
-#include "TypeTraits/EnableIf.hpp"
-#include "TypeTraits/IsFloatingPoint.hpp"
-#include "TypeTraits/IsReference.hpp"
-#include "TypeTraits/IsSame.hpp"
-
-// Returns the size (in bytes) of an object with n elements.
-// Can be very handy to determine the size of a StaticJsonBuffer.
-#define JSON_OBJECT_SIZE(NUMBER_OF_ELEMENTS) \
-  (sizeof(JsonObject) + (NUMBER_OF_ELEMENTS) * sizeof(JsonObject::node_type))
-
-namespace ArduinoJson {
-
-// Forward declarations
-class JsonArray;
-class JsonBuffer;
-
-// A dictionary of JsonVariant indexed by string (char*)
-//
-// The constructor is private, instances must be created via
-// JsonBuffer::createObject() or JsonBuffer::parseObject().
-// A JsonObject can be serialized to a JSON string via JsonObject::printTo().
-// It can also be deserialized from a JSON string via JsonBuffer::parseObject().
-class JsonObject : public Internals::JsonPrintable<JsonObject>,
-                   public Internals::ReferenceType,
-                   public Internals::List<JsonPair>,
-                   public Internals::JsonBufferAllocated {
- public:
-  // A meta-function that returns true if type T can be used in
-  // JsonObject::set()
-  template <typename T>
-  struct CanSet {
-    static const bool value = JsonVariant::IsConstructibleFrom<T>::value ||
-                              TypeTraits::IsSame<T, String&>::value ||
-                              TypeTraits::IsSame<T, const String&>::value;
-  };
-
-  // Create an empty JsonArray attached to the specified JsonBuffer.
-  // You should not use this constructor directly.
-  // Instead, use JsonBuffer::createObject() or JsonBuffer.parseObject().
-  explicit JsonObject(JsonBuffer* buffer) : Internals::List<JsonPair>(buffer) {}
-
-  // Gets or sets the value associated with the specified key.
-  JsonObjectSubscript<const char*> operator[](const char* key);
-  JsonObjectSubscript<const String&> operator[](const String& key);
-
-  // Gets the value associated with the specified key.
-  JsonVariant operator[](JsonObjectKey key) const {
-    return get(key);
-  }
-
-  // Sets the specified key with the specified value.
-  // bool set(TKey key, bool value);
-  // bool set(TKey key, char value);
-  // bool set(TKey key, long value);
-  // bool set(TKey key, int value);
-  // bool set(TKey key, short value);
-  // bool set(TKey key, float value);
-  // bool set(TKey key, double value);
-  // bool set(TKey key, const char* value);
-  // bool set(TKey key, RawJson value);
-  template <typename T>
-  bool set(
-      JsonObjectKey key, T value,
-      typename TypeTraits::EnableIf<
-          CanSet<T>::value && !TypeTraits::IsReference<T>::value>::type* = 0) {
-    return setNodeAt<T>(key, value);
-  }
-  // bool set(Key, String&);
-  // bool set(Key, JsonArray&);
-  // bool set(Key, JsonObject&);
-  // bool set(Key, JsonVariant&);
-  template <typename T>
-  bool set(JsonObjectKey key, const T& value,
-           typename TypeTraits::EnableIf<CanSet<T&>::value>::type* = 0) {
-    return setNodeAt<T&>(key, const_cast<T&>(value));
-  }
-  // bool set(Key, float value, uint8_t decimals);
-  // bool set(Key, double value, uint8_t decimals);
-  template <typename TValue>
-  bool set(JsonObjectKey key, TValue value, uint8_t decimals,
-           typename TypeTraits::EnableIf<
-               TypeTraits::IsFloatingPoint<TValue>::value>::type* = 0) {
-    return setNodeAt<const JsonVariant&>(key, JsonVariant(value, decimals));
-  }
-
-  // Gets the value associated with the specified key.
-  JsonVariant get(JsonObjectKey key) const {
-    node_type* node = getNodeAt(key.c_str());
-    return node ? node->content.value : JsonVariant();
-  }
-
-  // Gets the value associated with the specified key.
-  template <typename T>
-  typename Internals::JsonVariantAs<T>::type get(JsonObjectKey key) const {
-    node_type* node = getNodeAt(key.c_str());
-    return node ? node->content.value.as<T>() : JsonVariant::defaultValue<T>();
-  }
-
-  // Checks the type of the value associated with the specified key.
-  template <typename T>
-  bool is(JsonObjectKey key) const {
-    node_type* node = getNodeAt(key.c_str());
-    return node ? node->content.value.is<T>() : false;
-  }
-
-  // Creates and adds a JsonArray.
-  // This is a shortcut for JsonBuffer::createArray() and JsonObject::add().
-  JsonArray& createNestedArray(JsonObjectKey key);
-
-  // Creates and adds a JsonObject.
-  // This is a shortcut for JsonBuffer::createObject() and JsonObject::add().
-  JsonObject& createNestedObject(JsonObjectKey key);
-
-  // Tells weither the specified key is present and associated with a value.
-  bool containsKey(JsonObjectKey key) const {
-    return getNodeAt(key.c_str()) != NULL;
-  }
-
-  // Removes the specified key and the associated value.
-  void remove(JsonObjectKey key) {
-    removeNode(getNodeAt(key.c_str()));
-  }
-
-  // Returns a reference an invalid JsonObject.
-  // This object is meant to replace a NULL pointer.
-  // This is used when memory allocation or JSON parsing fail.
-  static JsonObject& invalid() {
-    static JsonObject instance(NULL);
-    return instance;
-  }
-
-  // Serialize the object to the specified JsonWriter
-  void writeTo(Internals::JsonWriter& writer) const {
-    writer.beginObject();
-
-    const node_type* node = _firstNode;
-    while (node) {
-      writer.writeString(node->content.key);
-      writer.writeColon();
-      node->content.value.writeTo(writer);
-
-      node = node->next;
-      if (!node) break;
-
-      writer.writeComma();
-    }
-
-    writer.endObject();
-  }
-
- private:
-  // Returns the list node that matches the specified key.
-  node_type* getNodeAt(const char* key) const {
-    for (node_type* node = _firstNode; node; node = node->next) {
-      if (!strcmp(node->content.key, key)) return node;
-    }
-    return NULL;
-  }
-
-  template <typename T>
-  bool setNodeAt(JsonObjectKey key, T value) {
-    node_type* node = getNodeAt(key.c_str());
-    if (!node) {
-      node = addNewNode();
-      if (!node || !setNodeKey(node, key)) return false;
-    }
-    return setNodeValue<T>(node, value);
-  }
-
-  bool setNodeKey(node_type* node, JsonObjectKey key) {
-    if (key.needs_copy()) {
-      node->content.key = _buffer->strdup(key.c_str());
-      if (node->content.key == NULL) return false;
-    } else {
-      node->content.key = key.c_str();
-    }
-    return true;
-  }
-
-  template <typename T>
-  bool setNodeValue(node_type* node, T value) {
-    node->content.value = value;
-    return true;
-  }
-};
-}

lib/ArduinoJson/include/ArduinoJson/JsonObject.ipp

@@ -1,66 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include "JsonArray.hpp"
-#include "JsonObject.hpp"
-#include "JsonObjectSubscript.hpp"
-
-namespace ArduinoJson {
-
-template <>
-inline bool JsonObject::setNodeValue(node_type *node, String &value) {
-  node->content.value = _buffer->strdup(value);
-  return node->content.value;
-}
-
-template <>
-inline bool JsonObject::setNodeValue(node_type *node, const String &value) {
-  node->content.value = _buffer->strdup(value);
-  return node->content.value;
-}
-
-template <>
-inline const JsonObject &JsonVariant::defaultValue<const JsonObject &>() {
-  return JsonObject::invalid();
-}
-
-template <>
-inline const JsonObject &JsonVariant::defaultValue<const JsonObject>() {
-  return JsonObject::invalid();
-}
-
-template <>
-inline JsonObject &JsonVariant::defaultValue<JsonObject &>() {
-  return JsonObject::invalid();
-}
-
-template <>
-inline JsonObject &JsonVariant::defaultValue<JsonObject>() {
-  return JsonObject::invalid();
-}
-
-inline JsonObject &JsonVariant::asObject() const {
-  if (_type == Internals::JSON_OBJECT) return *_content.asObject;
-  return JsonObject::invalid();
-}
-
-inline JsonObject &JsonObject::createNestedObject(JsonObjectKey key) {
-  if (!_buffer) return JsonObject::invalid();
-  JsonObject &array = _buffer->createObject();
-  setNodeAt<const JsonVariant &>(key, array);
-  return array;
-}
-
-inline JsonObject &JsonArray::createNestedObject() {
-  if (!_buffer) return JsonObject::invalid();
-  JsonObject &object = _buffer->createObject();
-  add(object);
-  return object;
-}
-}

lib/ArduinoJson/include/ArduinoJson/JsonObjectKey.hpp

@@ -1,27 +0,0 @@
-// Copyright Benoit Blanchon 2014-2016
-// MIT License
-//
-// Arduino JSON library
-// https://github.com/bblanchon/ArduinoJson
-// If you like this project, please add a star!
-
-#pragma once
-
-#include "String.hpp"
-
-namespace ArduinoJson {
-
-// Represents a key in a JsonObject
-class JsonObjectKey {
- public:
-  JsonObjectKey(const char* key) : _value(key), _needs_copy(false) {}
-  JsonObjectKey(const String& key) : _value(key.c_str()), _needs_copy(true) {}
-
-  const char* c_str() const { return _value; }
-  bool needs_copy() const { return _needs_copy; }
-
- private:
-  const char* _value;
-  bool _needs_copy;
-};
-}