automatically updated release notes for mega-20181124

[docs] Fixed some syntax error

.github/issue_template.md

@@ -1,3 +1,25 @@
+### Checklist
+- [ ] The title of this issue is "to the point" and descriptive.
+- [ ] This issue describes what is happening.
+- [ ] This issue describes what components are affected (e.g. name of plugin/controller)
+- [ ] This issue describes how to reproduce it.
+- [ ] This issue describes when it was introduced (when known) and what version is now showing the problem.
+
+### I have...
+- [ ] searched the [issue tracker](https://github.com/letscontrolit/ESPEasy/issues) or the [forum](https://www.letscontrolit.com/forum/viewforum.php?f=1) for a similar issue. (include links when applicable)
+- [ ] entered a system description using "Copy info to clipboard" on the sysinfo page. (when possible)
+- [ ] entered the full filename of the used version (e.g. `ESP_Easy_mega-20181001_test_ESP8266_4096_VCC.bin` )
+- [ ] given a list of active plugins or controllers when applicable.
+- [ ] filled out all applicable fields below.
+
+### Steps already tried...
+- [ ] Tried a clean install (empty `.bin` files are included in the ZIP)
+- [ ] Tested previous/other build (mention which one already tested)
+- [ ] Tested on other node to make sure hardware isn't defective.
+- [ ] Verified if the problem is limited to a single plugin/controller
+
+
+
 ### If you self compile, please state this and PLEASE try to ONLY REPORT ISSUES WITH OFFICIAL BUILDS! ###
 <!--- If you self compile, please state this and PLEASE try to ONLY REPORT ISSUES WITH OFFICIAL BUILDS!  --->
 <!--- NOTE: This is not a support forum! For questions and support go here: --->
@@ -5,6 +27,7 @@
 <!--- Remove topics that are not applicable to your feature request of issue --->
 <!--- Remember to have a "to the point" TITLE --->
 
+
 ### Summarize of the problem/feature request
 <!--- Describe the problem or feature request --->
 YOUR TEXT GOES HERE

.gitignore

@@ -22,3 +22,5 @@ test/output_export.cpp
 .vscode/.browse.c_cpp.db*
 .vscode/c_cpp_properties.json
 .vscode/launch.json
+
+docs/build/

.travis.yml

@@ -22,20 +22,19 @@ addons:
 
 
 install:
-  - pip install -U platformio
+  - pip install -U platformio sphinx recommonmark sphinx_bootstrap_theme
 
 script:
+  - platformio update
+  # patch platformio core libs for PUYA bug (https://github.com/letscontrolit/ESPEasy/issues/650)
+  - cd patches; ./check_puya_patch; cd ..
+
+  # - bash ./preflight.sh # make sure input files are OK before wasting time with prereqs
   # - cppcheck --enable=warning src/*.ino -q --force -I src --include=src/ESPEasy.ino --error-exitcode=1
   # - ./memanalyzer.py ~/.platformio/packages/toolchain-xtensa/bin/xtensa-lx106-elf-objdump
   - PLATFORMIO_BUILD_FLAGS="-D CONTINUOUS_INTEGRATION" platformio run
   - PLATFORMIO_BUILD_FLAGS="-D CONTINUOUS_INTEGRATION" platformio run
 
-  # patch platformio core libs for PUYA bug (https://github.com/letscontrolit/ESPEasy/issues/650)
-  - cd patches; ./check_puya_patch; cd ..
-  - PLATFORMIO_BUILD_FLAGS="-D CONTINUOUS_INTEGRATION" platformio run -s --environment dev_ESP8266PUYA_1024
-  - PLATFORMIO_BUILD_FLAGS="-D CONTINUOUS_INTEGRATION" platformio run -s --environment dev_ESP8266PUYA_1024
-
-
 before_deploy:
   - ./before_deploy
   - export RELEASE_FILE=$(ls ESPEasy*.zip)

README.md

@@ -41,4 +41,4 @@ ESPEasy_mega-20180102_dev_ESP8285_1024.bin     | ESP8285 with 1Mb flash  | Stabl
 
 Details and discussion are on the Experimental forum: https://www.letscontrolit.com/forum/viewforum.php?f=18
 
-We're also on IRC: #ESPEasy @freenode
+Automated builds of the (new) documentation can be found at [ESPEasy.readthedocs.io](https://espeasy.readthedocs.io/en/latest/)

before_deploy

@@ -1,27 +1,46 @@
 #!/bin/bash
 
 VERSION=$(git describe)
+TMP_DIST=`mktemp -d`
+CURPATH=`pwd`
+
+if [ ! -d ${TMP_DIST} ]; then
+  # Could not create temp dir, so exit
+  exit 1
+fi
 
 #Naming convention:
 # ESP_Easy_[github version]_[plugin set]_[chip type]_[flash memory].bin
 
+mkdir -p ${TMP_DIST}
+cp -r dist/* ${TMP_DIST}/
+
+if [ -d "docs/build" ]; then
+  # Docs have been created
+  mkdir -p ${TMP_DIST}/docs
+  cp -r docs/build/* ${TMP_DIST}/docs/
+fi
+
 
 for ENV in \
   normal_ESP8266_1024 \
   normal_ESP8266_4096 \
   normal_ESP8285_1024 \
   normal_IR_ESP8266_4096 \
+  normal_core_241_ESP8266_1024 \
+  normal_core_241_ESP8266_4096 \
   test_ESP8266_1024\
   test_ESP8266_4096\
   test_ESP8266_4096_VCC\
+  test_ESP8266_1024_VCC\
   test_ESP8285_1024\
   dev_ESP8266_1024\
   dev_ESP8266_4096\
   dev_ESP8285_1024\
-  dev_ESP8266PUYA_1024\
-  dev_ESP8266PUYA_1024_VCC\
   hard_SONOFF_POW\
-  hard_Shelly_1\
+  hard_SONOFF_POW_R2_4M\
+  minimal_ESP8266_1024_OTA\
+  minimal_ESP8285_1024_OTA\
   esp32dev\
   esp32test_1M8_partition;\
 do
@@ -30,19 +49,23 @@ do
   BIN=.pioenvs/${ENV}/ESP_Easy_${VERSION}_${ENV}.bin
   cp .pioenvs/${ENV}/firmware.bin $BIN
   python2 crc2.py $BIN
-  mv $BIN "dist/ESP_Easy_${VERSION}_${ENV}.bin"
+  mv $BIN "${TMP_DIST}/bin/ESP_Easy_${VERSION}_${ENV}.bin"
 done
 
 
 #create a source structure that is the same as the original ESPEasy project (and works with the howto on the wiki)
-rm -rf dist/Source 2>/dev/null
-mkdir dist/Source
-cp -r lib dist/Source/
-cp -r src dist/Source/
-cp platformio.ini dist/Source/
+#rm -rf dist/Source 2>/dev/null
 
-cd dist
+mkdir -p ${TMP_DIST}/source
+cp -r lib ${TMP_DIST}/source/
+cp -r src ${TMP_DIST}/source/
+cp platformio.ini ${TMP_DIST}/source/
+
+cd ${TMP_DIST}
 
 echo
 echo "### Creating zip archive"
-zip ../ESPEasy_$VERSION.zip -r .
+zip ${CURPATH}/ESPEasy_$VERSION.zip -r .
+
+rm -Rf ${TMP_DIST}/* 2>/dev/null
+rmdir ${TMP_DIST}

dist/README.txt

@@ -22,16 +22,13 @@ Build type can be:  (differ in included plugins)
 There is also a number of special builds:
 - normal_IR => "Normal" + IR receiver/transmitter plugins and library
 - hard_xxxxx => Special builds for some off-the-shelf hardware.
+- normal_core_241 => "Normal" using core 2.4.1, since 2.4.2 has issues with PWM
+- minimal_ESP82xx_1024_OTA => Minimum number of plugins and a limited set of controllers included to be able to perform a 2-step OTA on 1 MB flash nodes.
 
 Chip can be:
 - ESP8266      => Most likely option
 - ESP8285      => Used in some Sonoff modules
 - ESP32        => Experimental support at this moment
-- ESP8266PUYA  => For ESP modules with a flash chip labeled "PUYA" (often 1 MB)
-
-The "PUYA" version deserves a bit more attention.
-If you cannot save settings, better try to see if the flash chip has "PUYA" written on it.
-If so, try the "PUYA" build.
 
 MemorySize can be:
 - 1024  => 1 MB flash modules (e.g. almost all Sonoff modules)
@@ -54,8 +51,16 @@ To help recover from a bad flash, there are also blank images included.
 When the wrong image is flashed, or the module behaves unstable, or is in a reboot loop,
 flash these images first and then the right image for the module.
 
-Another great flash tool can be found here: (Windows only)
-  https://github.com/Grovkillen/ESP_Easy_Flasher
+ESP.Easy.Flasher.exe...
+... is the new flashing tool for ESP Easy. You need to run it in elevated mode (as admin)
+for it to fetch the COM ports correctly. If you want you may save YOUR settings using the
+"Save as default settings" button in the lower left corner. If the window is too big or
+too small you can experiment with the "Pixels Per Inch" variable in the
+..\Settings\Default.ini file. Setting it to =96 is working for most users but the
+application will try to find the most optimal value by default. Sometimes it fails to
+do that. More information about the tool is found here:
+https://github.com/Grovkillen/ESP_Easy_Flasher
 
+Further reading:
 For more information, see: https://github.com/letscontrolit/ESPEasy
 Or our forum: https://www.letscontrolit.com/forum/

dist/Release_notes.txt

@@ -1,3 +1,630 @@
+-------------------------------------------------
+Changes in release mega-20181124 (since mega-20181123)
+-------------------------------------------------
+
+Release date: Sat Nov 24 04:00:07 CET 2018
+
+Grovkillen (5):
+      [docs] fixed the TOC + added changelogs to all plugins + core
+      [docs] Added plugin names to plugin pages + fixed "site map"
+      [docs] Added donation links in footer
+      [docs] Added hardware pages
+      [docs] Fixed some syntax error
+
+
+-------------------------------------------------
+Changes in release mega-20181123 (since mega-20181122)
+-------------------------------------------------
+
+Release date: Fri Nov 23 04:00:08 CET 2018
+
+Grovkillen (3):
+      [docs] Fixed error in image path
+      [docs] Global variables for plugins + added raw plugin files
+      [docs] added all plugins to global + generated generic pages for them
+
+
+-------------------------------------------------
+Changes in release mega-20181122 (since mega-20181121)
+-------------------------------------------------
+
+Release date: Thu Nov 22 04:00:12 CET 2018
+
+Grovkillen (2):
+      [docs] Plugins (added real name)
+      [docs] added a first device page
+
+TD-er (2):
+      [P073_7DGT] Removed old (duplicate) content
+      [P073_7DGT] Fix uninitialized p073_dispdigit
+
+papperone (2):
+      Update _P073_7DGT.ino
+      Update _P073_7DGT.ino
+
+
+-------------------------------------------------
+Changes in release mega-20181121 (since mega-20181120)
+-------------------------------------------------
+
+Release date: Wed Nov 21 04:00:13 CET 2018
+
+Unknown (2):
+      [SSDP] Disable SSDP checkbox
+      [HTML] Made HTML layout more uniform and optimize CSS
+
+
+-------------------------------------------------
+Changes in release mega-20181120 (since mega-20181117)
+-------------------------------------------------
+
+Release date: Tue Nov 20 04:00:07 CET 2018
+
+Gijs Noorlander (1):
+      Update build_ESPeasy.sh
+
+Unknown (6):
+      [issue 2063] Incorrect saving settings on LCD2004
+      [OLED framed] Do not keep display lines allocated on stack
+      [P075 Nextion] Do not keep display lines allocated on stack
+      [Timing stats] Add LoadCustomTaskSettings() to the timing stats
+      [Build scripts] Add build script for Linux and include docs
+      [Build] Add test_ESP8266_1024_VCC to deploy script
+
+
+-------------------------------------------------
+Changes in release mega-20181117 (since mega-20181112)
+-------------------------------------------------
+
+Release date: Sat Nov 17 04:00:10 CET 2018
+
+Gijs Noorlander (2):
+      Update Sphinx to 1.8.1
+      [PlatformIO] Use 2.4.2 platform for Sonoff builds
+
+Grovkillen (11):
+      [docs] Rules converted from wiki
+      [docs] History converted to rst
+      [docs] Spelling + syntax fix
+      [docs] More spelling
+      [docs] Rules, fixed compile error
+      [docs] About us, month as XX
+      [docs] Plugins list
+      [docs] Plugin list + update to config.py + some CSS
+      [docs] Removed some test code
+      [fix] reverted test code
+      [docs] Inverted icon for easy to navigate browser tabs
+
+Stephen Houser (4):
+      initial 12/24 hour config
+      Add 12/24 hour time to clock
+      Remove update every second
+      add comments for new clock functions
+
+TD-er (4):
+      [1024 VCC] Add test_ESP8266_1024_VCC
+      [Input check] Add check when copying input texts
+      [Statistics] Add timing statistics on connect and DNS lookup
+      [Travis] ESP32 does not support timeout on DNS lookups
+
+jimmys01 (7):
+      Ir Remote lib enchantments
+      Make max IR command to be 200 chars long
+      extra dot fix
+      Put a PLUGIN_EXIT in place
+      syntax fix
+      Add appropriate check to irReceiver before disabling it
+      further improvments
+
+
+-------------------------------------------------
+Changes in release mega-20181112 (since mega-20181111)
+-------------------------------------------------
+
+Release date: Mon Nov 12 04:00:07 CET 2018
+
+Bartlomiej Zimon (1):
+      Eastron fix for model selection     issue #1684
+
+TD-er (6):
+      [Cleanup] Uniform labels for GPIO pins (existing labels)
+      [Cleanup] Uniform labels for GPIO pins
+      [Cleanup] Change label for P035_IRTX
+      [SPIFFS] perform delay during save per page break
+      Improve comments
+      [WiFi] Make sure unhandled WiFi events will be processed
+
+
+-------------------------------------------------
+Changes in release mega-20181111 (since mega-20181110)
+-------------------------------------------------
+
+Release date: Sun Nov 11 04:00:06 CET 2018
+
+Bartlomiej Zimon (2):
+      Webserver /control proper Content type     it sets printToWebJSON during PLUGIN_WRITE/SendStatus     fix for #2018
+      Webserver optimize /control early handled commands
+
+TD-er (1):
+      [JavaScript] Append zero termination to embedded progmem data
+
+
+-------------------------------------------------
+Changes in release mega-20181110 (since mega-20181109)
+-------------------------------------------------
+
+Release date: Sat Nov 10 04:00:08 CET 2018
+
+Bartlomiej Zimon (4):
+      HTTP responses have duplicate Content-Types     fix for #2018
+      remove double strings for contenttype
+      remove old duplication
+      properly send content-type header     fix for #2022
+
+TD-er (2):
+      [ESP32] Upgrade core lib to espressif32@1.5.0
+      [WiFi] Improve disconnect detection and run delay(1) when not connected
+
+
+-------------------------------------------------
+Changes in release mega-20181109 (since mega-20181108)
+-------------------------------------------------
+
+Release date: Fri Nov  9 04:00:10 CET 2018
+
+Bartlomiej Zimon (1):
+      add p078_dev_id to form save
+
+
+-------------------------------------------------
+Changes in release mega-20181108 (since mega-20181107)
+-------------------------------------------------
+
+Release date: Thu Nov  8 04:00:09 CET 2018
+
+Bartlomiej Zimon (2):
+      Add optional DE PIN configuration     Add gpio names to form     fix for #1684
+      Sysinfo update to 4 values
+
+Plebs (4):
+      bug fixes
+      cleaned if from addLog as per uzi18 comment
+      final cleanup
+      BUG fix
+
+TD-er (6):
+      [PUYA] Apply generic patch on all builds checking for PUYA flash
+      [Travis] Update platformIO packages before build
+      [PUYA] Add PUYA patch v3 to check if patch is applied
+      [PUYA] Fix patch v3 for PUYA support
+      [PUYA] share static flash_chip_id among functions
+      [PUYA] Fix typo in patch
+
+stefan (2):
+      Amend nosleep command to accept awake time
+      Add System#NoSleep=<time> event
+
+
+-------------------------------------------------
+Changes in release mega-20181107 (since mega-20181106)
+-------------------------------------------------
+
+Release date: Wed Nov  7 04:00:08 CET 2018
+
+TD-er (14):
+      [Cleanup] Reduce build image size by 2k by wrapping flash strings
+      [Cleanup] Reduce length HTML form data IDs to reduce sketch size
+      [Cleanup] Minify JavaScript and CSS to reduce sketch size
+      [1MB OTA] Add small build to allow for 1MB OTA
+      [Cleanup] Make single definition for pin description
+      [OTA] Add ESP8285 1M OTA minimal build
+      [Cleanup] Strip HTML templates into sections to remove duplicate strings
+      [Cleanup] Increase load speed and lower memory usage rendering web page
+      [Cleanup] Do not use F-macro for short strings
+      [timing stats] Add http://<ip>/stat/timing/json to view timing stats
+      [timingstats] Implement HTML table of timing stats
+      [timingstats] Disable timing stats in log
+      [timingstats] Improve table layout of timing stats
+      [timingstats] Show stats in msec instead of usec.
+
+
+-------------------------------------------------
+Changes in release mega-20181106 (since mega-20181105)
+-------------------------------------------------
+
+Release date: Tue Nov  6 04:00:10 CET 2018
+
+Grovkillen (1):
+      [Flasher] fixed ip bug fixed
+
+
+-------------------------------------------------
+Changes in release mega-20181105 (since mega-20181101)
+-------------------------------------------------
+
+Release date: Mon Nov  5 04:00:10 CET 2018
+
+Bartlomiej Zimon (2):
+      fix for #1986
+      Eastron - save modbus id and enable SDM630 model      partial fix for #1684
+
+Grovkillen (1):
+      [Memanalyzer] cmd args are back (un-commented)
+
+Jimmy Westberg (2):
+      Revert "[Flasher] updated flasher (some minor error)"
+      [Memanalyzer] try to fix the memanalyzer not analyzing all plugins
+
+kpalczewski (1):
+      bump lib IRremoteESP8266 to 2.5.2 and add send Pioneer support for 035 IR plugin.
+
+stefan (2):
+      Add sent/return value check to client.print()
+      Add comment why we check for %256
+
+
+-------------------------------------------------
+Changes in release mega-20181101 (since mega-20181031)
+-------------------------------------------------
+
+Release date: Thu Nov  1 04:00:08 CET 2018
+
+Bartłomiej Zimoń (1):
+      BlynkGet add timeout 1,5s.
+
+Grovkillen (4):
+      [README] added more info about ESP.Easy.Flasher
+      [README] fixed some \r\n
+      [Deploy] "source" folder was named "Source"
+      [README] removed IRC link... we're not there.
+
+Jimmy Westberg (1):
+      [Flasher] updated flasher (some minor error)
+
+Plebs (2):
+      Update src/Misc.ino
+      Update src/Misc.ino
+
+
+-------------------------------------------------
+Changes in release mega-20181031 (since mega-20181030)
+-------------------------------------------------
+
+Release date: Wed Oct 31 04:00:10 CET 2018
+
+Bartłomiej Zimoń (1):
+      BlynkGet fix loop #1951
+
+Jimmy Westberg (7):
+      [Flasher] Added ESP.Easy.Flasher.exe
+      [Deploy] Added sub folder for BIN files
+      [Flasher] Updated to 0.02.001
+      [Deploy] small letters are the standard
+      [Flasher] Updated to 0.02.002
+      [Path] folder rename 1
+      [Path] folder rename 2
+
+TD-er (1):
+      [OTA] Add OTA info and disable when not enough space
+
+
+-------------------------------------------------
+Changes in release mega-20181030 (since mega-20181029)
+-------------------------------------------------
+
+Release date: Tue Oct 30 04:00:07 CET 2018
+
+James Tutton (2):
+      Added Special Case to allow Servo to be disabled
+      Fixed missing ;
+
+TD-er (1):
+      [Core 2.4.2] Set core 2.4.2 as default platform
+
+svmac (1):
+      P022_PCA9685 Enhancements
+
+
+-------------------------------------------------
+Changes in release mega-20181029 (since mega-20181028)
+-------------------------------------------------
+
+Release date: Mon Oct 29 04:00:08 CET 2018
+
+Bartlomiej Zimon (2):
+      Dallas: add ScratchPad to debug log - OK suffix means data integrity ok (no communication problems)
+      Dallas: use reset timming from OneWire lib
+
+TD-er (2):
+      [NTP] Improve NTP accuracy
+      [NTP] Change log level for NTP success to INFO
+
+
+-------------------------------------------------
+Changes in release mega-20181028 (since mega-20181027)
+-------------------------------------------------
+
+Release date: Sun Oct 28 04:00:09 CET 2018
+
+Saverio Cisternino (5):
+      [CRON] Replace timeStruct with standard tm
+      [CRON] Plugin
+      [CRON] Add event PLUGIN_TIME_CHANGE
+      [CRON] Intercept event PLUGIN_TIME_CHANGE
+      [CRON] Fixed Daily flash write rate exceeded!
+
+TD-er (2):
+      [Cron] Rename plugin name to match naming convention
+      [Eastron] Make configurable and allow for multiple values read (#1684)
+
+
+-------------------------------------------------
+Changes in release mega-20181027 (since mega-20181026)
+-------------------------------------------------
+
+Release date: Sat Oct 27 04:00:12 CEST 2018
+
+Bartlomiej Zimon (1):
+      CSE7766 - fix stats plus add buffer fill level
+
+Gilad (7):
+      Add IR RAW2 Reading / Transmitting.
+      Add IR RAW2 Reading / Transmitting.
+      Add IR RAW2 Reading / Transmitting - fixed ambiguity.
+      Add IR RAW2 Reading / Transmitting - added a safety check.
+      Improved IR RAW2 format to support RLE.
+      Fixed warnings...
+      Fixed warnings...
+
+Gilad Raz (1):
+      Increased buffer size. Added constants.
+
+Plebs (4):
+      doubleclick and longpress for PCF and MCP
+      fixed a display bug
+      final fixes
+      fixed as requested
+
+
+-------------------------------------------------
+Changes in release mega-20181026 (since mega-20181025)
+-------------------------------------------------
+
+Release date: Fri Oct 26 04:00:22 CEST 2018
+
+Bartlomiej Zimon (7):
+      CSE7766 uses 8E1 serial connection
+      Ser2Net catch serial data only if plugin used
+      CSE7766 add online checksumming, autosyncing without data loos
+      move to PLUGIN_TEN_PER_SECOND     update comments
+      move to PLUGIN_SERIAL_IN from PLUGIN_TEN_PER_SECOND - serial commandline uses our data
+      optimization - remove double checksum check
+      CSE7766 - add some stats to debug log
+
+Saverio Cisternino (1):
+      Fixed plugin timer processing do not start, when call setPluginTaskTimer in PLUGIN_TIMER_IN
+
+TD-er (1):
+      [C009] Reduce memory usage for C009 controller.
+
+
+-------------------------------------------------
+Changes in release mega-20181025 (since mega-20181023)
+-------------------------------------------------
+
+Release date: Thu Oct 25 04:00:13 CEST 2018
+
+Saverio Cisternino (1):
+      Added auto redirect to home after run reboot command from web page.
+
+TD-er (5):
+      [WDT] Change yield() to delay(0)
+      [Build] Add Sonoff POW R2 (4MB)
+      [Sonoff] Add pre-defined switch and relay + rules on factory reset
+      [Info] Remove MD5 check fail on self-built images
+      [Travis] Use variables even when no predefined plugins are added.
+
+
+-------------------------------------------------
+Changes in release mega-20181023 (since mega-20181022)
+-------------------------------------------------
+
+Release date: Tue Oct 23 04:00:14 CEST 2018
+
+Kurairaito (2):
+      Update _P067_HX711_Load_Cell.ino
+      Update _P067_HX711_Load_Cell.ino
+
+TD-er (6):
+      [#1486] Allow multiple instances of rotary encoder
+      [JavaScript] Fix update values on Devices tab
+      [JavaScript] Cleanup some code duplication
+      [PubSubClient] Add delay when waiting for data and flush on disconnect
+      [WiFi timeout] Set default to 1000 msec again
+      [Docs] Add some WiFi related information to docs
+
+
+-------------------------------------------------
+Changes in release mega-20181022 (since mega-20181021)
+-------------------------------------------------
+
+Release date: Mon Oct 22 04:00:15 CEST 2018
+
+TD-er (2):
+      [Webserver] Generate copyText id names
+      [Webserver] Uniform row labels to reduce flash string size
+
+
+-------------------------------------------------
+Changes in release mega-20181021 (since mega-20181020)
+-------------------------------------------------
+
+Release date: Sun Oct 21 04:00:16 CEST 2018
+
+Bartlomiej Zimon (2):
+      fix for #1920     fix for out of sync, check both header bytes     proper check for abnormal state
+      Revert "fix for #1920"
+
+TD-er (6):
+      [stack usage] Allocate temp char array on heap for parsing arguments
+      Proper look for connection.
+      [Rules] Early exit on rules processing when rules not enabled
+      [#1910] Notification settings extra strings on stack
+      [#1891] Send all values for Generic UDP controller
+      [#1870] Feature request build date as system info
+
+
+-------------------------------------------------
+Changes in release mega-20181020 (since mega-20181017)
+-------------------------------------------------
+
+Release date: Sat Oct 20 04:00:16 CEST 2018
+
+Plebs (22):
+      Added [plugin#pcfgpio#pinstate#xx]
+      added [plugin#mcpgpio#pinstate#xx]
+      code optimization
+      some code optimizations
+      Update src/_P001_Switch.ino
+      Update src/_P001_Switch.ino
+      small fixes
+      few changes
+      Update src/_P001_Switch.ino
+      Update src/_P001_Switch.ino
+      some fixes
+      added global variables for rules
+      some fixes
+      fixes
+      fixed length check
+      some optimizations
+      modified command and variable name
+      Update src/_P001_Switch.ino
+      Update src/_P001_Switch.ino
+      optimizations
+      Update src/StringConverter.ino
+      added 4 variables to verify the system status
+
+kpalczewski (1):
+      add support for 64bit IR codes.
+
+
+-------------------------------------------------
+Changes in release mega-20181017 (since mega-20181016)
+-------------------------------------------------
+
+Release date: Wed Oct 17 04:00:18 CEST 2018
+
+Gijs Noorlander (1):
+      Added checklist to the Issue_template
+
+TD-er (3):
+      [#1906] Allocate NotificationSettings on the heap
+      [#1906] Allocate ControllerSettings on the heap
+      [Stack] Add Free Stack to System Info plugin
+
+
+-------------------------------------------------
+Changes in release mega-20181016 (since mega-20181015)
+-------------------------------------------------
+
+Release date: Tue Oct 16 04:00:06 CEST 2018
+
+Plebs (1):
+      Fix for togglegpio without gpio initialization
+
+TD-er (1):
+      [Revert] Safe_strncpy cannot be used as generic strncpy replacement
+
+
+-------------------------------------------------
+Changes in release mega-20181015 (since mega-20181014)
+-------------------------------------------------
+
+Release date: Mon Oct 15 04:00:10 CEST 2018
+
+Plebs (2):
+      fix for bug #1864
+      Update src/_P023_OLED.ino
+
+TD-er (1):
+      [safe strncpy] Add warning when entered string is too large
+
+
+-------------------------------------------------
+Changes in release mega-20181014 (since mega-20181011)
+-------------------------------------------------
+
+Release date: Sun Oct 14 04:00:13 CEST 2018
+
+Gijs Noorlander (1):
+      [#1799] Add SSID to main page
+
+TD-er (5):
+      [#1891] Generic UPD controller - send only first value from sensor
+      [Controller] Fix send only first value
+      Time#Initialized event in rules before %syshour% is set
+      [UX] Warn user for incomplete network IP settings
+      [#1895] Incorrect number bytes read I2C_read32_reg
+
+
+-------------------------------------------------
+Changes in release mega-20181011 (since mega-20181010)
+-------------------------------------------------
+
+Release date: Thu Oct 11 04:00:24 CEST 2018
+
+TD-er (5):
+      [C009] Reduce memory usage of FHEM HTTP delay queue
+      [Controller] Set default timeout to 300 msec (was 100 msec)
+      Make sure to load ExtraTaskSettings when needed
+      [Travis Doc] Remove building documentation by Travis
+      [WebLog] Disable weblog when it is not being read
+
+
+-------------------------------------------------
+Changes in release mega-20181010 (since mega-20181009)
+-------------------------------------------------
+
+Release date: Wed Oct 10 04:00:09 CEST 2018
+
+Plebs (1):
+      Update src/_P019_PCF8574.ino
+
+
+-------------------------------------------------
+Changes in release mega-20181009 (since mega-20181008)
+-------------------------------------------------
+
+Release date: Tue Oct  9 04:00:18 CEST 2018
+
+TD-er (7):
+      [Docs] Add favicon to documentation
+      [Docs] Add Travis check for documentation and stop build for docs only
+      [Docs] Run Travic documentation check before compiling project
+      [Docs] Disable travis_terminate for now
+      [JSON] Replace \n and \r in text fields
+      [LWIP1.4] Move back to LWIP1.4
+      [StringConverter] Some optimisations to reduce memory allocation
+
+
+-------------------------------------------------
+Changes in release mega-20181008 (since mega-20181007)
+-------------------------------------------------
+
+Release date: Mon Oct  8 04:00:09 CEST 2018
+
+Gijs Noorlander (1):
+      Added link to ReadTheDocs
+
+Grovkillen (1):
+      [Sphinx] added extension "sphinx.ext.imgconverter"
+
+TD-er (3):
+      [Sphinx] Initial setup for Sphinx documentation
+      [Docs] First ESPEasy documentation (Controllers)
+      [Docs] Added some directory structure and template
+
+
 -------------------------------------------------
 Changes in release mega-20181007 (since mega-20181006)
 -------------------------------------------------

docs/Makefile

@@ -0,0 +1,19 @@
+# Minimal makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+SOURCEDIR     = source
+BUILDDIR      = build
+
+# Put it first so that "make" without argument is like "make help".
+help:
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+
+.PHONY: help Makefile
+
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

docs/make.bat

@@ -0,0 +1,35 @@
+@ECHO OFF
+
+pushd %~dp0
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set SOURCEDIR=source
+set BUILDDIR=build
+
+if "%1" == "" goto help
+
+%SPHINXBUILD% >NUL 2>NUL
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.http://sphinx-doc.org/
+	exit /b 1
+)
+
+%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
+goto end
+
+:help
+%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
+
+:end
+popd

docs/requirements.txt

@@ -0,0 +1,3 @@
+recommonmark==0.4.0
+Sphinx==1.8.1
+sphinx-bootstrap-theme==0.6.5

docs/source/Controller/C001.rst

@@ -0,0 +1,2 @@
+C001
+====

docs/source/Controller/_Controller.rst

@@ -0,0 +1,66 @@
+Controller
+**********
+
+A controller is a component to enable a plugin to send data elsewhere.
+
+- Up-to 3 controllers can be active in ESPEasy.
+- Per plugin up-to 3 active controllers can be selected.
+- For some controllers an additional parameter can be given.
+
+For example, Domoticz needs an 'IDX' value to identify the configured entry in
+Domoticz for which new data is sent.
+
+Controller Parameters
+=====================
+
+Generic fields
+--------------
+
+- **Protocol** - The type of controller (e.g. ThingSpeak/OpenHAB MQTT/etc.)
+- **Locate Controller** - Selection between hostname/IP
+- **Controller Hostname/IP**  - The address to reach the selected service
+- **Controller Port** - TCP/UDP Port number (0...65536)
+- **Enabled** - Whether or not the controller is active.
+
+Send queue parameters
+---------------------
+
+Controllers have a queue to keep unsent messages.
+This queue is used to handle message bursts and also store messages which are recorded
+before WiFi connection is made or during lost connection.
+
+- **Minimum Send Interval** - Minimum time between two messages in msec.
+- **Max Queue Depth** - Maximum length of the buffer queue to keep unsent messages.
+- **Max Retries** - Maximum number of retries to send a message.
+- **Full Queue Action** - How to handle when queue is full, ignore new or delete oldest message.
+- **Client Timeout** - Timeout in msec for an network connection used by the controller.
+- **Check Reply** - When set to false, a sent message is considered always successful.
+
+
+Sample ThingSpeak configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Some controllers, like ThingSpeak, need a specific configuration.
+ThingSpeak only allows a message every 15 seconds for the free accounts.
+
+- **Minimum Send Interval** - 15000 msec
+- **Max Queue Depth** - 1 (only report the last value)
+- **Max Retries** - 2
+- **Full Queue Action** - Delete Oldest
+- **Client Timeout** - 500 msec (server is online, so timeout must be a bit longer)
+
+
+Controller user credentials
+---------------------------
+
+- **Controller User** - User name (optional)
+- **Controller Password** - Password (optional)
+
+MQTT related settings
+---------------------
+
+- **Controller Subscribe** - Subscribe to the given topic.
+- **Controller Publish** - Publish to the given topic.
+- **Controller lwl topic** - Topic to which LWT (Last Will Testament) messages should be sent.
+- **LWT Connect Message** - Connection established message.
+- **LWT Disconnect Message** - Connection lost message (sent to broker during connect and published by broker when connection is lost)

docs/source/ESPEasy/AboutUs.rst

@@ -0,0 +1,138 @@
+About Us
+********
+The ESP Easy project is being handled by the core team of TD-er and Grovkillen.
+TD-er being the head of backend and Grovkillen being head of the frontend.
+We both dig down into each others areas of responsible on a daily basis though.
+
+Other than us we have around 100 volunteers that helping us maintain
+and improve the source code.
+
+History
+=======
+ESP Easy has gone through a lot of changes over the last years and here's some
+of the major milestones.
+
+Early days (Nodo Uno)
+---------------------
+It's somewhat unknown how it all started but Paul Tonkes (part of the Nodo team)
+built a IR (infrared) to Kaku controller because he was not happy with the
+commercial version. That unit came to the world named as Nodo (Uno).
+
+04/2010 (Nodo Due)
+------------------
+Taken from the old Nodo website at the time that the Nodo update was introduced
+(named Nodo Due). During this time, a nice production class Arduino Shield was
+also built.
+
+10/2011 (Joining the Nodo community)
+------------------------------------
+The founder of the ESP Easy project, Mvb, read about the Nodo project and
+ordered his first Nodo Arduino board from the Nodo shop. He was using it to
+control Kaku lights around his house.
+
+03/2012 (Nodo Mega)
+--------------------
+Beta Nodo Mega was released, based on Arduino Mega 2560 board with Ethernet
+Shield. Using a hosted web application.
+
+05/2013 (Nodo NES Shield)
+-------------------------
+The hardware guys from the Nodo team released a shield for Arduino Mega 2560
+that contains everything needed to run Nodo Mega with the web application.
+
+01/2014 (Exploring new wireless capabilities)
+---------------------------------------------
+Nodo got its first 2.4GHz communication plugin, using the well known NRF24L01.
+This had solved limitations of the 433MHz OOK modules and at the same time it
+reduced the load on that frequency so Kaku became more reliable.
+
+Mvb decided to run a setup with two Nodo Mega units in the house. First unit
+runs the NES board for 433MHz communication, second board was dedicated for
+NRF24L01 communications. Both Mega's could communicate through I2C or Ethernet.
+
+02/2015 (Entering the Wi-Fi solution)
+-------------------------------------
+Nodo got its first ESP Wi-Fi plugin, using it as a serial to Wi-Fi bridge.
+At that time we were using the stock firmware that came with the module.
+
+04/2015 (ESP Connexio)
+----------------------
+The ESP Connexio project was initiated as the first effort to port the original
+Nodo code to the ESP platform using early version of the ESP8266 Arduino Core.
+The team had to workaround a lot of issues but got it working reasonably.
+
+05/2015 (ESP Easy initiative)
+-----------------------------
+ESP Easy was initiated, mainly because the Nodo Connexio concept was a bit
+over complicated. It had the same event list as the original Nodo project.
+Quite powerful but also complicated to end users. So the idea was to have
+something plug and play to hook up sensors to Domoticz. That decision of
+targeting Domoticz is still present in current source code since many plugins
+from the early days have the values setup in such a way that Domoticz can
+import them with little effort.
+
+09/2015 (ESP Easy R020)
+-----------------------
+As of R017 the Nodo Plugin mechanism was also implemented within ESP Easy.
+Some other inconvenient bugs were fixed, help buttons added and it was decided
+that R020 could be the first production edition.
+
+ESP Easy was launched on Sourceforge as the very first production edition.
+No programming required.
+
+02/2016 (ESP Easy R078)
+-----------------------
+To make things even more easy, edition R078 was provided as binary images
+with a simple installer. No need for a complicated Arduino IDE setup.
+And it also introduced OTA, so subsequent updates could be done without
+connecting the module to a serial port.
+
+08/2016 (ESP Easy R120)
+-----------------------
+Lots of fixes and additional features:
+
+* Rules engine
+* Custom dummy device
+* GlobalSync
+* More commands
+* More controllers
+* More devices
+
+Estimated user count was at this time around 7 000.
+
+11/2016 (ESP Easy Mega)
+-----------------------
+ESP Easy Mega was initiated (only for ESP Modules with at least 1MB flash
+memory). We had to many limitations in ESP Easy, due to the code size that
+exceeded the 512kB modules flash size. Decided to drop support for these
+classic modules and went forward with this version.
+
+02/2017 (Change of roles)
+-------------------------
+Psy0rz took over lead development of ESP Easy Mega (2.0.0), he moved the
+source code onto the GitHub page and started to modularize the code. He also
+made ESP Easy support multiple controllers and fallback Wi-Fi. During this time
+nightly releases was introduced and user counts had grown to around 20 000.
+
+08/2018 (New core team)
+-----------------------
+With both Mvb and Psy0rz having little time to spend on the project two of the
+most eager contributors Grovkillen (mainly wiki documentation and help tools
+at that time) and TD-er (had already implemented the event based Wi-Fi and
+scheduler for better timing) stepped in. The aim for the core team is to
+make the ESP Easy OS as great as can be by dedicating full time commitment to
+the project.
+
+User count was at this point approximately around 32 000 and 24 hour download
+count around 280.
+
+.. 11/2018 (First stable 2+ version)
+   ----------------------------------
+   The first stable release of the new 2.0.0 version was finally released. Much
+   of the features added had been in the nightly releases for more than a year
+   but in the process of modularizing the source code a lot of bugs were fixed,
+   much better timing added, but also some new bugs came into the light. The
+   team wanted to have the official stable release to be just that, stable.
+
+   Estimated user count was at this point around 40 000 and 24 hour download count
+   around 540.

docs/source/ESPEasy/FunctionBlocks.rst

@@ -0,0 +1,2 @@
+ESP Easy Function Blocks
+************************

docs/source/Participate/Documentation.rst

@@ -0,0 +1,35 @@
+Documentation
+*************
+
+For documentation we use Sphinx and this will be read by ReadTheDocs.
+We use the `Sphinx Bootstrap Theme <https://github.com/ryan-roemer/sphinx-bootstrap-theme>`_
+
+This documentation is included in the GitHub repository.
+It allows us to create documentation per version of ESPEasy.
+
+See also the `ESPEasy wiki <https://www.letscontrolit.com/wiki/index.php/ESPEasy>`_
+for more documentation which has not been moved here.
+
+Needed Python packages::
+
+   pip install sphinx recommonmark sphinx_bootstrap_theme
+
+PlatformIO with Atom
+====================
+
+With the ESPEasy project open in Atom, open the PIO terminal in Atom.
+
+Install dependencies::
+
+   cd docs
+   pip install ... (see needed Python packages above)
+
+Build on Windows::
+
+   cd docs
+   .\make.bat html
+
+Build on Linux/Mac::
+
+   cd docs
+   ./make html

docs/source/Plugin/P000_Level_converter.rst

@@ -0,0 +1,66 @@
+.. _P000_Level_converter_page:
+
+Level converter
+===============
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Level shifter, aka logic converter. Used to turn logics of higher voltage (5V) down to ESP friendly voltage (3.3V).
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P001.rst

@@ -0,0 +1,40 @@
+.. _P001_page:
+
+|P001_typename|
+==================================================
+
+|P001_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P001_type|
+
+Name: |P001_name|
+
+Status: |P001_status|
+
+GitHub: |P001_github|_
+
+Maintainer: |P001_maintainer|
+
+
+Supported hardware
+------------------
+
+|P001_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P001_Buzzer_RTTL.rst

@@ -0,0 +1,69 @@
+.. _P001_Buzzer_RTTL_page:
+
+Buzzer (RTTL)
+=============
+
+|P001_typename|
+|P001_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Output
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P001_Door_switch.rst

@@ -0,0 +1,68 @@
+.. _P001_Door_switch_page:
+
+Door switch
+===========
+
+|P001_typename|
+|P001_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P001_ESP_internal_output.rst

@@ -0,0 +1,73 @@
+.. _P001_ESP_internal_output_page:
+
+ESP internal output
+===================
+
+|P001_typename|
+|P001_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * LED
+ * Tunes
+ * Servos
+ * PWM
+ * etc.
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P001_PIR_sensor.rst

@@ -0,0 +1,69 @@
+.. _P001_PIR_sensor_page:
+
+PIR sensor
+==========
+
+|P001_typename|
+|P001_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Motion (change in heat)
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P001_Piezo_element.rst

@@ -0,0 +1,69 @@
+.. _P001_Piezo_element_page:
+
+Piezo element
+=============
+
+|P001_typename|
+|P001_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Output
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P001_Relay.rst

@@ -0,0 +1,70 @@
+.. _P001_Relay_page:
+
+Relay
+=====
+
+|P001_typename|
+|P001_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Optocopler
+ * Solid state
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P001_Rotary_Encoder.rst

@@ -0,0 +1,69 @@
+.. _P001_Rotary_Encoder_page:
+
+Rotary Encoder
+==============
+
+|P001_typename|
+|P001_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Input
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P001_Servo_motor.rst

@@ -0,0 +1,69 @@
+.. _P001_Servo_motor_page:
+
+Servo motor
+===========
+
+|P001_typename|
+|P001_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Controlling servo motors using pwm
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P001_Speaker.rst

@@ -0,0 +1,69 @@
+.. _P001_Speaker_page:
+
+Speaker
+=======
+
+|P001_typename|
+|P001_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Output
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P001_Switch.rst

@@ -0,0 +1,68 @@
+.. _P001_Switch_page:
+
+Switch
+======
+
+|P001_typename|
+|P001_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P002.rst

@@ -0,0 +1,40 @@
+.. _P002_page:
+
+|P002_typename|
+==================================================
+
+|P002_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P002_type|
+
+Name: |P002_name|
+
+Status: |P002_status|
+
+GitHub: |P002_github|_
+
+Maintainer: |P002_maintainer|
+
+
+Supported hardware
+------------------
+
+|P002_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P002_ESP82XX_internal.rst

@@ -0,0 +1,69 @@
+.. _P002_ESP82XX_internal_page:
+
+ESP82XX internal
+================
+
+|P002_typename|
+|P002_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Analog signal (0-1V)
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P002_PCF8591.rst

@@ -0,0 +1,69 @@
+.. _P002_PCF8591_page:
+
+PCF8591
+=======
+
+|P002_typename|
+|P002_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Analog signal (0-5V)
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P002_Photosensitive_resistor.rst

@@ -0,0 +1,70 @@
+.. _P002_Photosensitive_resistor_page:
+
+Photosensitive resistor
+=======================
+
+|P002_typename|
+|P002_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Light intensity
+ * Analog 1-100% or Binary above/below trigger value
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P003.rst

@@ -0,0 +1,40 @@
+.. _P003_page:
+
+|P003_typename|
+==================================================
+
+|P003_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P003_type|
+
+Name: |P003_name|
+
+Status: |P003_status|
+
+GitHub: |P003_github|_
+
+Maintainer: |P003_maintainer|
+
+
+Supported hardware
+------------------
+
+|P003_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P003_LJ12A3.rst

@@ -0,0 +1,69 @@
+.. _P003_LJ12A3_page:
+
+LJ12A3
+======
+
+|P003_typename|
+|P003_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Inductive proximity sensor
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P003_Pulse_logic_input.rst

@@ -0,0 +1,69 @@
+.. _P003_Pulse_logic_input_page:
+
+Pulse logic input
+=================
+
+|P003_typename|
+|P003_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * General, output as pulse
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P003_TCR5000.rst

@@ -0,0 +1,70 @@
+.. _P003_TCR5000_page:
+
+TCR5000
+=======
+
+|P003_typename|
+|P003_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * IR emitter + phototransistor (for ex. water/electricity meters)
+ * Distance
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P004.rst

@@ -0,0 +1,40 @@
+.. _P004_page:
+
+|P004_typename|
+==================================================
+
+|P004_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P004_type|
+
+Name: |P004_name|
+
+Status: |P004_status|
+
+GitHub: |P004_github|_
+
+Maintainer: |P004_maintainer|
+
+
+Supported hardware
+------------------
+
+|P004_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P004_DS18b20.rst

@@ -0,0 +1,69 @@
+.. _P004_DS18b20_page:
+
+DS18b20
+=======
+
+|P004_typename|
+|P004_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Temperature (-55 to +125C)
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P005.rst

@@ -0,0 +1,40 @@
+.. _P005_page:
+
+|P005_typename|
+==================================================
+
+|P005_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P005_type|
+
+Name: |P005_name|
+
+Status: |P005_status|
+
+GitHub: |P005_github|_
+
+Maintainer: |P005_maintainer|
+
+
+Supported hardware
+------------------
+
+|P005_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P005_DHT11_DHT22.rst

@@ -0,0 +1,70 @@
+.. _P005_DHT11_DHT22_page:
+
+DHT11/DHT22
+===========
+
+|P005_typename|
+|P005_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Temperature (-40 to +85C) 
+ * Humidity (0-100 % rel. humidity)
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P006.rst

@@ -0,0 +1,40 @@
+.. _P006_page:
+
+|P006_typename|
+==================================================
+
+|P006_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P006_type|
+
+Name: |P006_name|
+
+Status: |P006_status|
+
+GitHub: |P006_github|_
+
+Maintainer: |P006_maintainer|
+
+
+Supported hardware
+------------------
+
+|P006_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P006_BMP085_BMP180.rst

@@ -0,0 +1,70 @@
+.. _P006_BMP085_BMP180_page:
+
+BMP085/BMP180
+=============
+
+|P006_typename|
+|P006_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Temperature (-40 to +85C)
+ * Barometric pressure (300-1100 hPa)
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P007.rst

@@ -0,0 +1,40 @@
+.. _P007_page:
+
+|P007_typename|
+==================================================
+
+|P007_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P007_type|
+
+Name: |P007_name|
+
+Status: |P007_status|
+
+GitHub: |P007_github|_
+
+Maintainer: |P007_maintainer|
+
+
+Supported hardware
+------------------
+
+|P007_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P008.rst

@@ -0,0 +1,40 @@
+.. _P008_page:
+
+|P008_typename|
+==================================================
+
+|P008_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P008_type|
+
+Name: |P008_name|
+
+Status: |P008_status|
+
+GitHub: |P008_github|_
+
+Maintainer: |P008_maintainer|
+
+
+Supported hardware
+------------------
+
+|P008_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P008_Wiegand-26.rst

@@ -0,0 +1,69 @@
+.. _P008_Wiegand-26_page:
+
+Wiegand-26
+==========
+
+|P008_typename|
+|P008_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * RFID
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P009.rst

@@ -0,0 +1,40 @@
+.. _P009_page:
+
+|P009_typename|
+==================================================
+
+|P009_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P009_type|
+
+Name: |P009_name|
+
+Status: |P009_status|
+
+GitHub: |P009_github|_
+
+Maintainer: |P009_maintainer|
+
+
+Supported hardware
+------------------
+
+|P009_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P009_MCP23017.rst

@@ -0,0 +1,69 @@
+.. _P009_MCP23017_page:
+
+MCP23017
+========
+
+|P009_typename|
+|P009_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Input / output
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P010.rst

@@ -0,0 +1,40 @@
+.. _P010_page:
+
+|P010_typename|
+==================================================
+
+|P010_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P010_type|
+
+Name: |P010_name|
+
+Status: |P010_status|
+
+GitHub: |P010_github|_
+
+Maintainer: |P010_maintainer|
+
+
+Supported hardware
+------------------
+
+|P010_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P010_BH1750.rst

@@ -0,0 +1,69 @@
+.. _P010_BH1750_page:
+
+BH1750
+======
+
+|P010_typename|
+|P010_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Illuminance, lux
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P011.rst

@@ -0,0 +1,40 @@
+.. _P011_page:
+
+|P011_typename|
+==================================================
+
+|P011_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P011_type|
+
+Name: |P011_name|
+
+Status: |P011_status|
+
+GitHub: |P011_github|_
+
+Maintainer: |P011_maintainer|
+
+
+Supported hardware
+------------------
+
+|P011_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P012.rst

@@ -0,0 +1,40 @@
+.. _P012_page:
+
+|P012_typename|
+==================================================
+
+|P012_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P012_type|
+
+Name: |P012_name|
+
+Status: |P012_status|
+
+GitHub: |P012_github|_
+
+Maintainer: |P012_maintainer|
+
+
+Supported hardware
+------------------
+
+|P012_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P012_LCD.rst

@@ -0,0 +1,69 @@
+.. _P012_LCD_page:
+
+LCD
+===
+
+|P012_typename|
+|P012_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Output
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P013.rst

@@ -0,0 +1,40 @@
+.. _P013_page:
+
+|P013_typename|
+==================================================
+
+|P013_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P013_type|
+
+Name: |P013_name|
+
+Status: |P013_status|
+
+GitHub: |P013_github|_
+
+Maintainer: |P013_maintainer|
+
+
+Supported hardware
+------------------
+
+|P013_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P013_HC-SR04.rst

@@ -0,0 +1,69 @@
+.. _P013_HC-SR04_page:
+
+HC-SR04
+=======
+
+|P013_typename|
+|P013_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Ultrasonic distance sensor
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P014.rst

@@ -0,0 +1,40 @@
+.. _P014_page:
+
+|P014_typename|
+==================================================
+
+|P014_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P014_type|
+
+Name: |P014_name|
+
+Status: |P014_status|
+
+GitHub: |P014_github|_
+
+Maintainer: |P014_maintainer|
+
+
+Supported hardware
+------------------
+
+|P014_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P014_SI7021_HTU21D.rst

@@ -0,0 +1,70 @@
+.. _P014_SI7021_HTU21D_page:
+
+SI7021/HTU21D
+=============
+
+|P014_typename|
+|P014_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Temperature (-40 to +125C) 
+ * Humidity (0-100 % rel. humidity)
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P015.rst

@@ -0,0 +1,40 @@
+.. _P015_page:
+
+|P015_typename|
+==================================================
+
+|P015_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P015_type|
+
+Name: |P015_name|
+
+Status: |P015_status|
+
+GitHub: |P015_github|_
+
+Maintainer: |P015_maintainer|
+
+
+Supported hardware
+------------------
+
+|P015_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P016.rst

@@ -0,0 +1,40 @@
+.. _P016_page:
+
+|P016_typename|
+==================================================
+
+|P016_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P016_type|
+
+Name: |P016_name|
+
+Status: |P016_status|
+
+GitHub: |P016_github|_
+
+Maintainer: |P016_maintainer|
+
+
+Supported hardware
+------------------
+
+|P016_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P017.rst

@@ -0,0 +1,40 @@
+.. _P017_page:
+
+|P017_typename|
+==================================================
+
+|P017_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P017_type|
+
+Name: |P017_name|
+
+Status: |P017_status|
+
+GitHub: |P017_github|_
+
+Maintainer: |P017_maintainer|
+
+
+Supported hardware
+------------------
+
+|P017_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P017_PN532.rst

@@ -0,0 +1,69 @@
+.. _P017_PN532_page:
+
+PN532
+=====
+
+|P017_typename|
+|P017_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * RFID
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P018.rst

@@ -0,0 +1,40 @@
+.. _P018_page:
+
+|P018_typename|
+==================================================
+
+|P018_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P018_type|
+
+Name: |P018_name|
+
+Status: |P018_status|
+
+GitHub: |P018_github|_
+
+Maintainer: |P018_maintainer|
+
+
+Supported hardware
+------------------
+
+|P018_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P018_GP2Y10.rst

@@ -0,0 +1,69 @@
+.. _P018_GP2Y10_page:
+
+GP2Y10
+======
+
+|P018_typename|
+|P018_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * "Dust" (particle matter: PM2.5)
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P019.rst

@@ -0,0 +1,40 @@
+.. _P019_page:
+
+|P019_typename|
+==================================================
+
+|P019_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P019_type|
+
+Name: |P019_name|
+
+Status: |P019_status|
+
+GitHub: |P019_github|_
+
+Maintainer: |P019_maintainer|
+
+
+Supported hardware
+------------------
+
+|P019_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P019_PCF8574.rst

@@ -0,0 +1,69 @@
+.. _P019_PCF8574_page:
+
+PCF8574
+=======
+
+|P019_typename|
+|P019_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Input / output
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P020.rst

@@ -0,0 +1,40 @@
+.. _P020_page:
+
+|P020_typename|
+==================================================
+
+|P020_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P020_type|
+
+Name: |P020_name|
+
+Status: |P020_status|
+
+GitHub: |P020_github|_
+
+Maintainer: |P020_maintainer|
+
+
+Supported hardware
+------------------
+
+|P020_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P021.rst

@@ -0,0 +1,40 @@
+.. _P021_page:
+
+|P021_typename|
+==================================================
+
+|P021_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P021_type|
+
+Name: |P021_name|
+
+Status: |P021_status|
+
+GitHub: |P021_github|_
+
+Maintainer: |P021_maintainer|
+
+
+Supported hardware
+------------------
+
+|P021_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P022.rst

@@ -0,0 +1,40 @@
+.. _P022_page:
+
+|P022_typename|
+==================================================
+
+|P022_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P022_type|
+
+Name: |P022_name|
+
+Status: |P022_status|
+
+GitHub: |P022_github|_
+
+Maintainer: |P022_maintainer|
+
+
+Supported hardware
+------------------
+
+|P022_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P022_PCA9685.rst

@@ -0,0 +1,69 @@
+.. _P022_PCA9685_page:
+
+PCA9685
+=======
+
+|P022_typename|
+|P022_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Output
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P023.rst

@@ -0,0 +1,40 @@
+.. _P023_page:
+
+|P023_typename|
+==================================================
+
+|P023_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P023_type|
+
+Name: |P023_name|
+
+Status: |P023_status|
+
+GitHub: |P023_github|_
+
+Maintainer: |P023_maintainer|
+
+
+Supported hardware
+------------------
+
+|P023_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P023_OLED.rst

@@ -0,0 +1,69 @@
+.. _P023_OLED_page:
+
+OLED
+====
+
+|P023_typename|
+|P023_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Output
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P024.rst

@@ -0,0 +1,40 @@
+.. _P024_page:
+
+|P024_typename|
+==================================================
+
+|P024_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P024_type|
+
+Name: |P024_name|
+
+Status: |P024_status|
+
+GitHub: |P024_github|_
+
+Maintainer: |P024_maintainer|
+
+
+Supported hardware
+------------------
+
+|P024_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P024_MLX90614.rst

@@ -0,0 +1,70 @@
+.. _P024_MLX90614_page:
+
+MLX90614
+========
+
+|P024_typename|
+|P024_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Sensor temperature (-40 to +125C)
+ * IR temperature (-70 to +380C)
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P025.rst

@@ -0,0 +1,40 @@
+.. _P025_page:
+
+|P025_typename|
+==================================================
+
+|P025_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P025_type|
+
+Name: |P025_name|
+
+Status: |P025_status|
+
+GitHub: |P025_github|_
+
+Maintainer: |P025_maintainer|
+
+
+Supported hardware
+------------------
+
+|P025_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P025_ADS1115.rst

@@ -0,0 +1,69 @@
+.. _P025_ADS1115_page:
+
+ADS1115
+=======
+
+|P025_typename|
+|P025_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Analog signal (0-5V)
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P026.rst

@@ -0,0 +1,40 @@
+.. _P026_page:
+
+|P026_typename|
+==================================================
+
+|P026_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P026_type|
+
+Name: |P026_name|
+
+Status: |P026_status|
+
+GitHub: |P026_github|_
+
+Maintainer: |P026_maintainer|
+
+
+Supported hardware
+------------------
+
+|P026_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P027.rst

@@ -0,0 +1,40 @@
+.. _P027_page:
+
+|P027_typename|
+==================================================
+
+|P027_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P027_type|
+
+Name: |P027_name|
+
+Status: |P027_status|
+
+GitHub: |P027_github|_
+
+Maintainer: |P027_maintainer|
+
+
+Supported hardware
+------------------
+
+|P027_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P027_INA219.rst

@@ -0,0 +1,70 @@
+.. _P027_INA219_page:
+
+INA219
+======
+
+|P027_typename|
+|P027_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Current (max +/-3.2A)
+ * Voltage (max. 26V)
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P028.rst

@@ -0,0 +1,40 @@
+.. _P028_page:
+
+|P028_typename|
+==================================================
+
+|P028_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P028_type|
+
+Name: |P028_name|
+
+Status: |P028_status|
+
+GitHub: |P028_github|_
+
+Maintainer: |P028_maintainer|
+
+
+Supported hardware
+------------------
+
+|P028_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P028_BME280.rst

@@ -0,0 +1,71 @@
+.. _P028_BME280_page:
+
+BME280
+======
+
+|P028_typename|
+|P028_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Temperature (-40 to +85C) 
+ * Humidity (0-100 % rel. humidity)
+ * Barometric pressure (300-1100 hPa)
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P029.rst

@@ -0,0 +1,40 @@
+.. _P029_page:
+
+|P029_typename|
+==================================================
+
+|P029_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P029_type|
+
+Name: |P029_name|
+
+Status: |P029_status|
+
+GitHub: |P029_github|_
+
+Maintainer: |P029_maintainer|
+
+
+Supported hardware
+------------------
+
+|P029_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P030.rst

@@ -0,0 +1,40 @@
+.. _P030_page:
+
+|P030_typename|
+==================================================
+
+|P030_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P030_type|
+
+Name: |P030_name|
+
+Status: |P030_status|
+
+GitHub: |P030_github|_
+
+Maintainer: |P030_maintainer|
+
+
+Supported hardware
+------------------
+
+|P030_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P030_BMP280.rst

@@ -0,0 +1,70 @@
+.. _P030_BMP280_page:
+
+BMP280
+======
+
+|P030_typename|
+|P030_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Temperature (-40 to +85C) 
+ * Barometric pressure (300-1100 hPa)
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P031.rst

@@ -0,0 +1,40 @@
+.. _P031_page:
+
+|P031_typename|
+==================================================
+
+|P031_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P031_type|
+
+Name: |P031_name|
+
+Status: |P031_status|
+
+GitHub: |P031_github|_
+
+Maintainer: |P031_maintainer|
+
+
+Supported hardware
+------------------
+
+|P031_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P031_SHT1X.rst

@@ -0,0 +1,70 @@
+.. _P031_SHT1X_page:
+
+SHT1X
+=====
+
+|P031_typename|
+|P031_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Temperature
+ * Humidity
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P032.rst

@@ -0,0 +1,40 @@
+.. _P032_page:
+
+|P032_typename|
+==================================================
+
+|P032_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P032_type|
+
+Name: |P032_name|
+
+Status: |P032_status|
+
+GitHub: |P032_github|_
+
+Maintainer: |P032_maintainer|
+
+
+Supported hardware
+------------------
+
+|P032_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P032_MS5611.rst

@@ -0,0 +1,70 @@
+.. _P032_MS5611_page:
+
+MS5611
+======
+
+|P032_typename|
+|P032_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Temperature (-40 to +85C) 
+ * Barometric pressure (10 to 1200 mbar)
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P033.rst

@@ -0,0 +1,40 @@
+.. _P033_page:
+
+|P033_typename|
+==================================================
+
+|P033_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P033_type|
+
+Name: |P033_name|
+
+Status: |P033_status|
+
+GitHub: |P033_github|_
+
+Maintainer: |P033_maintainer|
+
+
+Supported hardware
+------------------
+
+|P033_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P034.rst

@@ -0,0 +1,40 @@
+.. _P034_page:
+
+|P034_typename|
+==================================================
+
+|P034_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P034_type|
+
+Name: |P034_name|
+
+Status: |P034_status|
+
+GitHub: |P034_github|_
+
+Maintainer: |P034_maintainer|
+
+
+Supported hardware
+------------------
+
+|P034_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P034_DHT12.rst

@@ -0,0 +1,70 @@
+.. _P034_DHT12_page:
+
+DHT12
+=====
+
+|P034_typename|
+|P034_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * Temperature (-20 to +60C) 
+ * Humidity (20-95 % rel. humidity)
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P035.rst

@@ -0,0 +1,40 @@
+.. _P035_page:
+
+|P035_typename|
+==================================================
+
+|P035_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P035_type|
+
+Name: |P035_name|
+
+Status: |P035_status|
+
+GitHub: |P035_github|_
+
+Maintainer: |P035_maintainer|
+
+
+Supported hardware
+------------------
+
+|P035_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P035_IR_transmitter.rst

@@ -0,0 +1,69 @@
+.. _P035_IR_transmitter_page:
+
+IR transmitter
+==============
+
+|P035_typename|
+|P035_status|
+
+
+Introduction
+------------
+
+
+Specifications:
+ * IRTX
+
+
+Wiring
+------
+
+
+.. code-block:: html
+
+  ESP               S8
+  GPIO (X)   <-->   TX
+  GPIO (X)   <-->   RX
+
+
+  Power
+  5.0V       <-->   VCC
+  GND        <-->   GND
+
+
+Setup
+-----
+
+
+
+Rules examples
+--------------
+
+.. code-block:: html
+
+  //Code below...
+
+
+Indicators (recommended settings)
+---------------------------------
+
+.. csv-table::
+  :header: "Indicator", "Value Name", "Interval", "Decimals", "Extra information"
+  :widths: 8, 5, 5, 5, 40
+
+  "XXXXXX", "N/A", "", "", ""
+
+Where to buy
+------------
+
+.. csv-table::
+  :header: "Store", "Link"
+  :widths: 5, 40
+
+  "AliExpress","`Link 1 ($) <http://s.click.aliexpress.com/e/cg1fhDDI>`_"
+
+|affiliate|
+
+
+More pictures
+-------------

docs/source/Plugin/P036.rst

@@ -0,0 +1,40 @@
+.. _P036_page:
+
+|P036_typename|
+==================================================
+
+|P036_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P036_type|
+
+Name: |P036_name|
+
+Status: |P036_status|
+
+GitHub: |P036_github|_
+
+Maintainer: |P036_maintainer|
+
+
+Supported hardware
+------------------
+
+|P036_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P037.rst

@@ -0,0 +1,40 @@
+.. _P037_page:
+
+|P037_typename|
+==================================================
+
+|P037_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P037_type|
+
+Name: |P037_name|
+
+Status: |P037_status|
+
+GitHub: |P037_github|_
+
+Maintainer: |P037_maintainer|
+
+
+Supported hardware
+------------------
+
+|P037_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.

docs/source/Plugin/P038.rst

@@ -0,0 +1,40 @@
+.. _P038_page:
+
+|P038_typename|
+==================================================
+
+|P038_shortinfo|
+
+Plugin details
+--------------
+
+Type: |P038_type|
+
+Name: |P038_name|
+
+Status: |P038_status|
+
+GitHub: |P038_github|_
+
+Maintainer: |P038_maintainer|
+
+
+Supported hardware
+------------------
+
+|P038_usedby|
+
+Change log
+----------
+
+.. versionchanged:: 2.0
+  ...
+
+  |added|
+  Major overhaul for 2.0 release.
+
+.. versionadded:: 1.0
+  ...
+
+  |added|
+  Initial release version.