Add Arduino example

2026-07-27 19:56:23 +00:00 · 2019-07-08 16:21:52 +03:00
parent cef716d94f
commit 8dda391d4b
1 changed files with 152 additions and 0 deletions
@@ -0,0 +1,152 @@
+/**************************************************************
+ *
+ * This sketch connects to a website and downloads a page.
+ * It can be used to perform HTTP/RESTful API calls.
+ *
+ * TinyGSM Getting Started guide:
+ *   https://tiny.cc/tinygsm-readme
+ *
+ **************************************************************/
+
+// Select your modem:
+#define TINY_GSM_MODEM_SIM800
+
+// Increase RX buffer if needed
+#define TINY_GSM_RX_BUFFER 512
+
+// Define the serial console for debug prints, if needed
+//#define TINY_GSM_DEBUG SerialMon
+//#define DUMP_AT_COMMANDS
+
+// Uncomment this if you want to use SSL
+//#define USE_SSL
+
+// Set serial for debug console (to the Serial Monitor, default speed 115200)
+#define SerialMon Serial
+
+// Set serial for AT commands (to the module)
+#define SerialAT Serial1
+
+// Your GPRS credentials (leave empty, if missing)
+const char apn[]      = ""; // Your APN
+const char gprsUser[] = ""; // User
+const char gprsPass[] = ""; // Password
+const char simPIN[]   = ""; // SIM card PIN code, if any
+
+// Server details
+const char server[] = "vsh.pp.ua";
+const char resource[] = "/TinyGSM/logo.txt";
+
+#include <TinyGsmClient.h>
+
+#ifdef DUMP_AT_COMMANDS
+  #include <StreamDebugger.h>
+  StreamDebugger debugger(SerialAT, SerialMon);
+  TinyGsm modem(debugger);
+#else
+  TinyGsm modem(SerialAT);
+#endif
+
+#ifdef USE_SSL
+  TinyGsmClientSecure client(modem);
+  const int  port = 443;
+#else
+  TinyGsmClient client(modem);
+  const int  port = 80;
+#endif
+
+void setup() {
+  // Set console baud rate
+  SerialMon.begin(115200);
+  delay(10);
+
+  // Set your reset, enable, power pins here
+  pinMode(4, OUTPUT);
+  pinMode(5, OUTPUT);
+  digitalWrite(4, LOW);
+  digitalWrite(5, HIGH);
+
+  SerialMon.println("Wait...");
+
+  // Set GSM module baud rate and UART pins
+  SerialAT.begin(115200, SERIAL_8N1, 26, 27);
+  delay(3000);
+
+  // Restart takes quite some time
+  // To skip it, call init() instead of restart()
+  SerialMon.println("Initializing modem...");
+  modem.restart();
+  // modem.init();
+
+  String modemInfo = modem.getModemInfo();
+  SerialMon.print("Modem: ");
+  SerialMon.println(modemInfo);
+
+  // Unlock your SIM card with a PIN if needed
+  if (strlen(simPIN) && modem.getSimStatus() != 3 ) {
+    modem.simUnlock(simPIN);
+  }
+}
+
+void loop() {
+  SerialMon.print("Waiting for network...");
+  if (!modem.waitForNetwork(240000L)) {
+    SerialMon.println(" fail");
+    delay(10000);
+    return;
+  }
+  SerialMon.println(" OK");
+
+  if (modem.isNetworkConnected()) {
+    SerialMon.println("Network connected");
+  }
+
+  SerialMon.print(F("Connecting to "));
+  SerialMon.print(apn);
+  if (!modem.gprsConnect(apn, gprsUser, gprsPass)) {
+    SerialMon.println(" fail");
+    delay(10000);
+    return;
+  }
+  SerialMon.println(" OK");
+
+  SerialMon.print("Connecting to ");
+  SerialMon.println(server);
+  if (!client.connect(server, port)) {
+    SerialMon.println(" fail");
+    delay(10000);
+    return;
+  }
+  SerialMon.println(" OK");
+
+  // Make a HTTP GET request:
+  SerialMon.println("Performing HTTP GET request...");
+  client.print(String("GET ") + resource + " HTTP/1.1\r\n");
+  client.print(String("Host: ") + server + "\r\n");
+  client.print("Connection: close\r\n\r\n");
+  client.println();
+
+  unsigned long timeout = millis();
+  while (client.connected() && millis() - timeout < 10000L) {
+    // Print available data
+    while (client.available()) {
+      char c = client.read();
+      SerialMon.print(c);
+      timeout = millis();
+    }
+  }
+  SerialMon.println();
+
+  // Shutdown
+
+  client.stop();
+  SerialMon.println(F("Server disconnected"));
+
+  modem.gprsDisconnect();
+  SerialMon.println(F("GPRS disconnected"));
+
+  // Do nothing forevermore
+  while (true) {
+    delay(1000);
+  }
+}