mirror of
https://github.com/Seeed-Studio/Seeed_Arduino_CAN.git
synced 2026-07-28 04:06:45 +00:00
83 lines
2.2 KiB
Arduino
83 lines
2.2 KiB
Arduino
// demo: CAN-BUS Shield, receive data with check mode
|
||
// send data coming to fast, such as less than 10ms, you can use this way
|
||
// loovee, 2014-6-13
|
||
|
||
|
||
#include <SPI.h>
|
||
/*SAMD core*/
|
||
#ifdef ARDUINO_SAMD_VARIANT_COMPLIANCE
|
||
#define SERIAL SerialUSB
|
||
#else
|
||
#define SERIAL Serial
|
||
#endif
|
||
|
||
#define CAN_2515
|
||
// #define CAN_2518FD
|
||
|
||
// the cs pin of the version after v1.1 is default to D9
|
||
// v0.9b and v1.0 is default D10
|
||
|
||
// Set SPI CS Pin according to your hardware
|
||
// For Wio Terminal w/ MCP2518FD RPi Hat：
|
||
// Channel 0 SPI_CS Pin: BCM 8
|
||
// Channel 1 SPI_CS Pin: BCM 7
|
||
// Interupt Pin: BCM25
|
||
// *****************************************
|
||
// For Arduino MCP2515 Hat:
|
||
// SPI_CS Pin: D9
|
||
|
||
#ifdef CAN_2518FD
|
||
#include "mcp2518fd_can.h"
|
||
const int SPI_CS_PIN = 9;
|
||
const int CAN_INT_PIN = 2;
|
||
mcp2518fd CAN(SPI_CS_PIN); // Set CS pin
|
||
#endif
|
||
|
||
#ifdef CAN_2515
|
||
#include "mcp2515_can.h"
|
||
const int SPI_CS_PIN = 9;
|
||
const int CAN_INT_PIN = 2;
|
||
mcp2515_can CAN(SPI_CS_PIN); // Set CS pin
|
||
#endif
|
||
|
||
void setup() {
|
||
SERIAL.begin(115200);
|
||
|
||
#ifdef CAN_2518FD
|
||
while (0 != CAN.begin((byte)CAN_500K_1M)) { // init can bus : baudrate = 500k
|
||
#else
|
||
while (CAN_OK != CAN.begin(CAN_500KBPS)) { // init can bus : baudrate = 500k
|
||
#endif
|
||
SERIAL.println("CAN BUS Shield init fail");
|
||
SERIAL.println(" Init CAN BUS Shield again");
|
||
delay(100);
|
||
}
|
||
SERIAL.println("CAN BUS Shield init ok!");
|
||
}
|
||
|
||
|
||
void loop() {
|
||
unsigned char len = 0;
|
||
unsigned char buf[8];
|
||
|
||
if (CAN_MSGAVAIL == CAN.checkReceive()) { // check if data coming
|
||
CAN.readMsgBuf(&len, buf); // read data, len: data length, buf: data buf
|
||
|
||
unsigned long canId = CAN.getCanId();
|
||
|
||
SERIAL.println("-----------------------------");
|
||
SERIAL.print("Get data from ID: 0x");
|
||
SERIAL.println(canId, HEX);
|
||
|
||
for (int i = 0; i < len; i++) { // print the data
|
||
SERIAL.print(buf[i], HEX);
|
||
SERIAL.print("\t");
|
||
}
|
||
SERIAL.println();
|
||
}
|
||
}
|
||
|
||
/*********************************************************************************************************
|
||
END FILE
|
||
*********************************************************************************************************/
|