Update library.properties

clang
Merge pull request #39 from dherrada/patch-1
2026-09-13 10:03:41 +00:00 · 2020-01-16 11:36:14 -08:00 · 2020-01-13 19:17:10 -05:00 · 2019-11-16 22:49:03 -05:00 · 2019-11-16 22:42:48 -05:00 · 2019-08-10 16:20:30 -04:00
19 changed files with 3820 additions and 1 deletions
@@ -0,0 +1,46 @@
+Thank you for opening an issue on an Adafruit Arduino library repository.  To
+improve the speed of resolution please review the following guidelines and
+common troubleshooting steps below before creating the issue:
+
+- **Do not use GitHub issues for troubleshooting projects and issues.**  Instead use
+  the forums at http://forums.adafruit.com to ask questions and troubleshoot why
+  something isn't working as expected.  In many cases the problem is a common issue
+  that you will more quickly receive help from the forum community.  GitHub issues
+  are meant for known defects in the code.  If you don't know if there is a defect
+  in the code then start with troubleshooting on the forum first.
+
+- **If following a tutorial or guide be sure you didn't miss a step.** Carefully
+  check all of the steps and commands to run have been followed.  Consult the
+  forum if you're unsure or have questions about steps in a guide/tutorial.
+
+- **For Arduino projects check these very common issues to ensure they don't apply**:
+
+  - For uploading sketches or communicating with the board make sure you're using
+    a **USB data cable** and **not** a **USB charge-only cable**.  It is sometimes
+    very hard to tell the difference between a data and charge cable!  Try using the
+    cable with other devices or swapping to another cable to confirm it is not
+    the problem.
+
+  - **Be sure you are supplying adequate power to the board.**  Check the specs of
+    your board and plug in an external power supply.  In many cases just
+    plugging a board into your computer is not enough to power it and other
+    peripherals.
+
+  - **Double check all soldering joints and connections.**  Flakey connections
+    cause many mysterious problems.  See the [guide to excellent soldering](https://learn.adafruit.com/adafruit-guide-excellent-soldering/tools) for examples of good solder joints.
+
+  - **Ensure you are using an official Arduino or Adafruit board.** We can't
+    guarantee a clone board will have the same functionality and work as expected
+    with this code and don't support them.
+
+If you're sure this issue is a defect in the code and checked the steps above
+please fill in the following fields to provide enough troubleshooting information.
+You may delete the guideline and text above to just leave the following details:
+
+- Arduino board:  **INSERT ARDUINO BOARD NAME/TYPE HERE**
+
+- Arduino IDE version (found in Arduino -> About Arduino menu):  **INSERT ARDUINO
+  VERSION HERE**
+
+- List the steps to reproduce the problem below (if possible attach a sketch or
+  copy the sketch code in too): **LIST REPRO STEPS BELOW**
@@ -0,0 +1,26 @@
+Thank you for creating a pull request to contribute to Adafruit's GitHub code!
+Before you open the request please review the following guidelines and tips to
+help it be more easily integrated:
+
+- **Describe the scope of your change--i.e. what the change does and what parts
+  of the code were modified.**  This will help us understand any risks of integrating
+  the code.
+
+- **Describe any known limitations with your change.**  For example if the change
+  doesn't apply to a supported platform of the library please mention it.
+
+- **Please run any tests or examples that can exercise your modified code.**  We
+  strive to not break users of the code and running tests/examples helps with this
+  process.
+
+Thank you again for contributing!  We will try to test and integrate the change
+as soon as we can, but be aware we have many GitHub repositories to manage and
+can't immediately respond to every request.  There is no need to bump or check in
+on a pull request (it will clutter the discussion of the request).
+
+Also don't be worried if the request is closed or not integrated--sometimes the
+priorities of Adafruit's GitHub code (education, ease of use) might not match the
+priorities of the pull request.  Don't fret, the open source community thrives on
+forks and GitHub makes it easy to keep your changes in a forked repo.
+
+After reviewing the guidelines above you can delete this text from the pull request.
@@ -0,0 +1,99 @@
+// IMPORTANT: SEE COMMENTS @ LINE 15 REGARDING SHIELD VS BREAKOUT BOARD USAGE.
+
+// Graphics library by ladyada/adafruit with init code from Rossum
+// MIT license
+
+#ifndef _ADAFRUIT_TFTLCD_H_
+#define _ADAFRUIT_TFTLCD_H_
+
+#if ARDUINO >= 100
+#include "Arduino.h"
+#else
+#include "WProgram.h"
+#endif
+
+#include <Adafruit_GFX.h>
+
+// **** IF USING THE LCD BREAKOUT BOARD, COMMENT OUT THIS NEXT LINE. ****
+// **** IF USING THE LCD SHIELD, LEAVE THE LINE ENABLED:             ****
+
+//#define USE_ADAFRUIT_SHIELD_PINOUT 1
+
+class Adafruit_TFTLCD : public Adafruit_GFX {
+
+public:
+  Adafruit_TFTLCD(uint8_t cs, uint8_t cd, uint8_t wr, uint8_t rd, uint8_t rst);
+  Adafruit_TFTLCD(void);
+
+  void begin(uint16_t id = 0x9325);
+  void drawPixel(int16_t x, int16_t y, uint16_t color);
+  void drawFastHLine(int16_t x0, int16_t y0, int16_t w, uint16_t color);
+  void drawFastVLine(int16_t x0, int16_t y0, int16_t h, uint16_t color);
+  void fillRect(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t c);
+  void fillScreen(uint16_t color);
+  void reset(void);
+  void setRegisters8(uint8_t *ptr, uint8_t n);
+  void setRegisters16(uint16_t *ptr, uint8_t n);
+  void setRotation(uint8_t x);
+  // These methods are public in order for BMP examples to work:
+  void setAddrWindow(int x1, int y1, int x2, int y2);
+  void pushColors(uint16_t *data, uint8_t len, boolean first);
+
+  uint16_t color565(uint8_t r, uint8_t g, uint8_t b),
+      readPixel(int16_t x, int16_t y), readID(void);
+  uint32_t readReg(uint8_t r);
+
+private:
+  void init(),
+  // These items may have previously been defined as macros
+  // in pin_magic.h.  If not, function versions are declared:
+#ifndef write8
+      write8(uint8_t value),
+#endif
+#ifndef setWriteDir
+      setWriteDir(void),
+#endif
+#ifndef setReadDir
+      setReadDir(void),
+#endif
+#ifndef writeRegister8
+      writeRegister8(uint8_t a, uint8_t d),
+#endif
+#ifndef writeRegister16
+      writeRegister16(uint16_t a, uint16_t d),
+#endif
+      writeRegister24(uint8_t a, uint32_t d),
+      writeRegister32(uint8_t a, uint32_t d),
+#ifndef writeRegisterPair
+      writeRegisterPair(uint8_t aH, uint8_t aL, uint16_t d),
+#endif
+      setLR(void), flood(uint16_t color, uint32_t len);
+  uint8_t driver;
+
+#ifndef read8
+  uint8_t read8fn(void);
+#define read8isFunctionalized
+#endif
+
+#ifndef USE_ADAFRUIT_SHIELD_PINOUT
+
+#ifdef __AVR__
+  volatile uint8_t *csPort, *cdPort, *wrPort, *rdPort;
+  uint8_t csPinSet, cdPinSet, wrPinSet, rdPinSet, csPinUnset, cdPinUnset,
+      wrPinUnset, rdPinUnset, _reset;
+#endif
+#if defined(__SAM3X8E__)
+  Pio *csPort, *cdPort, *wrPort, *rdPort;
+  uint32_t csPinSet, cdPinSet, wrPinSet, rdPinSet, csPinUnset, cdPinUnset,
+      wrPinUnset, rdPinUnset, _reset;
+#endif
+
+#endif
+};
+
+// For compatibility with sketches written for older versions of library.
+// Color function name was changed to 'color565' for parity with 2.2" LCD
+// library.
+#define Color565 color565
+
+#endif
@@ -1 +1,19 @@
-My gh-pages branch
+# Adafruit library for 8-bit TFT LCDs such as ILI9325, ILI9328, etc
+
+This is a library for our Adafruit 16-channel PWM & Servo driver, shield or FeatherWing
+
+<a href="https://www.adafruit.com/products/335"><img src="assets/image.jpg" height="300"/></a>
+
+Pick one up today in the adafruit shop!
+  * https://www.adafruit.com/product/335
+  * https://www.adafruit.com/product/376
+
+These displays use 8-bit parallel to communicate, 12 or 13 pins are required to interface (RST is optional).
+
+Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!
+
+Written by Limor Fried/Ladyada for Adafruit Industries. BSD license, check license.txt for more information. 
+
+All text above must be included in any redistribution
+
+To install, use the Arduino Library Manager and search for "Adafruit 2.8" TFT display Library" and install the library.
@@ -0,0 +1,385 @@
+// IMPORTANT: Adafruit_TFTLCD LIBRARY MUST BE SPECIFICALLY
+// CONFIGURED FOR EITHER THE TFT SHIELD OR THE BREAKOUT BOARD.
+// SEE RELEVANT COMMENTS IN Adafruit_TFTLCD.h FOR SETUP.
+
+#include <Adafruit_GFX.h>    // Core graphics library
+#include <Adafruit_TFTLCD.h> // Hardware-specific library
+
+// The control pins for the LCD can be assigned to any digital or
+// analog pins...but we'll use the analog pins as this allows us to
+// double up the pins with the touch screen (see the TFT paint example).
+#define LCD_CS A3 // Chip Select goes to Analog 3
+#define LCD_CD A2 // Command/Data goes to Analog 2
+#define LCD_WR A1 // LCD Write goes to Analog 1
+#define LCD_RD A0 // LCD Read goes to Analog 0
+
+#define LCD_RESET A4 // Can alternately just connect to Arduino's reset pin
+
+// When using the BREAKOUT BOARD only, use these 8 data lines to the LCD:
+// For the Arduino Uno, Duemilanove, Diecimila, etc.:
+//   D0 connects to digital pin 8  (Notice these are
+//   D1 connects to digital pin 9   NOT in order!)
+//   D2 connects to digital pin 2
+//   D3 connects to digital pin 3
+//   D4 connects to digital pin 4
+//   D5 connects to digital pin 5
+//   D6 connects to digital pin 6
+//   D7 connects to digital pin 7
+// For the Arduino Mega, use digital pins 22 through 29
+// (on the 2-row header at the end of the board).
+
+// Assign human-readable names to some common 16-bit color values:
+#define	BLACK   0x0000
+#define	BLUE    0x001F
+#define	RED     0xF800
+#define	GREEN   0x07E0
+#define CYAN    0x07FF
+#define MAGENTA 0xF81F
+#define YELLOW  0xFFE0
+#define WHITE   0xFFFF
+
+Adafruit_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);
+// If using the shield, all control and data lines are fixed, and
+// a simpler declaration can optionally be used:
+// Adafruit_TFTLCD tft;
+
+void setup(void) {
+  Serial.begin(9600);
+  Serial.println(F("TFT LCD test"));
+
+#ifdef USE_ADAFRUIT_SHIELD_PINOUT
+  Serial.println(F("Using Adafruit 2.8\" TFT Arduino Shield Pinout"));
+#else
+  Serial.println(F("Using Adafruit 2.8\" TFT Breakout Board Pinout"));
+#endif
+
+  Serial.print("TFT size is "); Serial.print(tft.width()); Serial.print("x"); Serial.println(tft.height());
+
+  tft.reset();
+
+  uint16_t identifier = tft.readID();
+
+  if(identifier == 0x9325) {
+    Serial.println(F("Found ILI9325 LCD driver"));
+  } else if(identifier == 0x9328) {
+    Serial.println(F("Found ILI9328 LCD driver"));
+  } else if(identifier == 0x7575) {
+    Serial.println(F("Found HX8347G LCD driver"));
+  } else if(identifier == 0x9341) {
+    Serial.println(F("Found ILI9341 LCD driver"));
+  } else if(identifier == 0x8357) {
+    Serial.println(F("Found HX8357D LCD driver"));
+  } else {
+    Serial.print(F("Unknown LCD driver chip: "));
+    Serial.println(identifier, HEX);
+    Serial.println(F("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
+    Serial.println(F("  #define USE_ADAFRUIT_SHIELD_PINOUT"));
+    Serial.println(F("should appear in the library header (Adafruit_TFT.h)."));
+    Serial.println(F("If using the breakout board, it should NOT be #defined!"));
+    Serial.println(F("Also if using the breakout, double-check that all wiring"));
+    Serial.println(F("matches the tutorial."));
+    return;
+  }
+
+  tft.begin(identifier);
+
+  Serial.println(F("Benchmark                Time (microseconds)"));
+
+  Serial.print(F("Screen fill              "));
+  Serial.println(testFillScreen());
+  delay(500);
+
+  Serial.print(F("Text                     "));
+  Serial.println(testText());
+  delay(3000);
+
+  Serial.print(F("Lines                    "));
+  Serial.println(testLines(CYAN));
+  delay(500);
+
+  Serial.print(F("Horiz/Vert Lines         "));
+  Serial.println(testFastLines(RED, BLUE));
+  delay(500);
+
+  Serial.print(F("Rectangles (outline)     "));
+  Serial.println(testRects(GREEN));
+  delay(500);
+
+  Serial.print(F("Rectangles (filled)      "));
+  Serial.println(testFilledRects(YELLOW, MAGENTA));
+  delay(500);
+
+  Serial.print(F("Circles (filled)         "));
+  Serial.println(testFilledCircles(10, MAGENTA));
+
+  Serial.print(F("Circles (outline)        "));
+  Serial.println(testCircles(10, WHITE));
+  delay(500);
+
+  Serial.print(F("Triangles (outline)      "));
+  Serial.println(testTriangles());
+  delay(500);
+
+  Serial.print(F("Triangles (filled)       "));
+  Serial.println(testFilledTriangles());
+  delay(500);
+
+  Serial.print(F("Rounded rects (outline)  "));
+  Serial.println(testRoundRects());
+  delay(500);
+
+  Serial.print(F("Rounded rects (filled)   "));
+  Serial.println(testFilledRoundRects());
+  delay(500);
+
+  Serial.println(F("Done!"));
+}
+
+void loop(void) {
+  for(uint8_t rotation=0; rotation<4; rotation++) {
+    tft.setRotation(rotation);
+    testText();
+    delay(2000);
+  }
+}
+
+unsigned long testFillScreen() {
+  unsigned long start = micros();
+  tft.fillScreen(BLACK);
+  tft.fillScreen(RED);
+  tft.fillScreen(GREEN);
+  tft.fillScreen(BLUE);
+  tft.fillScreen(BLACK);
+  return micros() - start;
+}
+
+unsigned long testText() {
+  tft.fillScreen(BLACK);
+  unsigned long start = micros();
+  tft.setCursor(0, 0);
+  tft.setTextColor(WHITE);  tft.setTextSize(1);
+  tft.println("Hello World!");
+  tft.setTextColor(YELLOW); tft.setTextSize(2);
+  tft.println(1234.56);
+  tft.setTextColor(RED);    tft.setTextSize(3);
+  tft.println(0xDEADBEEF, HEX);
+  tft.println();
+  tft.setTextColor(GREEN);
+  tft.setTextSize(5);
+  tft.println("Groop");
+  tft.setTextSize(2);
+  tft.println("I implore thee,");
+  tft.setTextSize(1);
+  tft.println("my foonting turlingdromes.");
+  tft.println("And hooptiously drangle me");
+  tft.println("with crinkly bindlewurdles,");
+  tft.println("Or I will rend thee");
+  tft.println("in the gobberwarts");
+  tft.println("with my blurglecruncheon,");
+  tft.println("see if I don't!");
+  return micros() - start;
+}
+
+unsigned long testLines(uint16_t color) {
+  unsigned long start, t;
+  int           x1, y1, x2, y2,
+                w = tft.width(),
+                h = tft.height();
+
+  tft.fillScreen(BLACK);
+
+  x1 = y1 = 0;
+  y2    = h - 1;
+  start = micros();
+  for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color);
+  x2    = w - 1;
+  for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color);
+  t     = micros() - start; // fillScreen doesn't count against timing
+
+  tft.fillScreen(BLACK);
+
+  x1    = w - 1;
+  y1    = 0;
+  y2    = h - 1;
+  start = micros();
+  for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color);
+  x2    = 0;
+  for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color);
+  t    += micros() - start;
+
+  tft.fillScreen(BLACK);
+
+  x1    = 0;
+  y1    = h - 1;
+  y2    = 0;
+  start = micros();
+  for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color);
+  x2    = w - 1;
+  for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color);
+  t    += micros() - start;
+
+  tft.fillScreen(BLACK);
+
+  x1    = w - 1;
+  y1    = h - 1;
+  y2    = 0;
+  start = micros();
+  for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color);
+  x2    = 0;
+  for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color);
+
+  return micros() - start;
+}
+
+unsigned long testFastLines(uint16_t color1, uint16_t color2) {
+  unsigned long start;
+  int           x, y, w = tft.width(), h = tft.height();
+
+  tft.fillScreen(BLACK);
+  start = micros();
+  for(y=0; y<h; y+=5) tft.drawFastHLine(0, y, w, color1);
+  for(x=0; x<w; x+=5) tft.drawFastVLine(x, 0, h, color2);
+
+  return micros() - start;
+}
+
+unsigned long testRects(uint16_t color) {
+  unsigned long start;
+  int           n, i, i2,
+                cx = tft.width()  / 2,
+                cy = tft.height() / 2;
+
+  tft.fillScreen(BLACK);
+  n     = min(tft.width(), tft.height());
+  start = micros();
+  for(i=2; i<n; i+=6) {
+    i2 = i / 2;
+    tft.drawRect(cx-i2, cy-i2, i, i, color);
+  }
+
+  return micros() - start;
+}
+
+unsigned long testFilledRects(uint16_t color1, uint16_t color2) {
+  unsigned long start, t = 0;
+  int           n, i, i2,
+                cx = tft.width()  / 2 - 1,
+                cy = tft.height() / 2 - 1;
+
+  tft.fillScreen(BLACK);
+  n = min(tft.width(), tft.height());
+  for(i=n; i>0; i-=6) {
+    i2    = i / 2;
+    start = micros();
+    tft.fillRect(cx-i2, cy-i2, i, i, color1);
+    t    += micros() - start;
+    // Outlines are not included in timing results
+    tft.drawRect(cx-i2, cy-i2, i, i, color2);
+  }
+
+  return t;
+}
+
+unsigned long testFilledCircles(uint8_t radius, uint16_t color) {
+  unsigned long start;
+  int x, y, w = tft.width(), h = tft.height(), r2 = radius * 2;
+
+  tft.fillScreen(BLACK);
+  start = micros();
+  for(x=radius; x<w; x+=r2) {
+    for(y=radius; y<h; y+=r2) {
+      tft.fillCircle(x, y, radius, color);
+    }
+  }
+
+  return micros() - start;
+}
+
+unsigned long testCircles(uint8_t radius, uint16_t color) {
+  unsigned long start;
+  int           x, y, r2 = radius * 2,
+                w = tft.width()  + radius,
+                h = tft.height() + radius;
+
+  // Screen is not cleared for this one -- this is
+  // intentional and does not affect the reported time.
+  start = micros();
+  for(x=0; x<w; x+=r2) {
+    for(y=0; y<h; y+=r2) {
+      tft.drawCircle(x, y, radius, color);
+    }
+  }
+
+  return micros() - start;
+}
+
+unsigned long testTriangles() {
+  unsigned long start;
+  int           n, i, cx = tft.width()  / 2 - 1,
+                      cy = tft.height() / 2 - 1;
+
+  tft.fillScreen(BLACK);
+  n     = min(cx, cy);
+  start = micros();
+  for(i=0; i<n; i+=5) {
+    tft.drawTriangle(
+      cx    , cy - i, // peak
+      cx - i, cy + i, // bottom left
+      cx + i, cy + i, // bottom right
+      tft.color565(0, 0, i));
+  }
+
+  return micros() - start;
+}
+
+unsigned long testFilledTriangles() {
+  unsigned long start, t = 0;
+  int           i, cx = tft.width()  / 2 - 1,
+                   cy = tft.height() / 2 - 1;
+
+  tft.fillScreen(BLACK);
+  start = micros();
+  for(i=min(cx,cy); i>10; i-=5) {
+    start = micros();
+    tft.fillTriangle(cx, cy - i, cx - i, cy + i, cx + i, cy + i,
+      tft.color565(0, i, i));
+    t += micros() - start;
+    tft.drawTriangle(cx, cy - i, cx - i, cy + i, cx + i, cy + i,
+      tft.color565(i, i, 0));
+  }
+
+  return t;
+}
+
+unsigned long testRoundRects() {
+  unsigned long start;
+  int           w, i, i2,
+                cx = tft.width()  / 2 - 1,
+                cy = tft.height() / 2 - 1;
+
+  tft.fillScreen(BLACK);
+  w     = min(tft.width(), tft.height());
+  start = micros();
+  for(i=0; i<w; i+=6) {
+    i2 = i / 2;
+    tft.drawRoundRect(cx-i2, cy-i2, i, i, i/8, tft.color565(i, 0, 0));
+  }
+
+  return micros() - start;
+}
+
+unsigned long testFilledRoundRects() {
+  unsigned long start;
+  int           i, i2,
+                cx = tft.width()  / 2 - 1,
+                cy = tft.height() / 2 - 1;
+
+  tft.fillScreen(BLACK);
+  start = micros();
+  for(i=min(tft.width(), tft.height()); i>20; i-=6) {
+    i2 = i / 2;
+    tft.fillRoundRect(cx-i2, cy-i2, i, i, i/8, tft.color565(0, i, 0));
+  }
+
+  return micros() - start;
+}
@@ -0,0 +1,223 @@
+// IMPORTANT: Adafruit_TFTLCD LIBRARY MUST BE SPECIFICALLY
+// CONFIGURED FOR EITHER THE TFT SHIELD OR THE BREAKOUT BOARD.
+// SEE RELEVANT COMMENTS IN Adafruit_TFTLCD.h FOR SETUP.
+
+#include <Adafruit_GFX.h>    // Core graphics library
+#include <Adafruit_TFTLCD.h> // Hardware-specific library
+
+// The control pins for the LCD can be assigned to any digital or
+// analog pins...but we'll use the analog pins as this allows us to
+// double up the pins with the touch screen (see the TFT paint example).
+#define LCD_CS A3 // Chip Select goes to Analog 3
+#define LCD_CD A2 // Command/Data goes to Analog 2
+#define LCD_WR A1 // LCD Write goes to Analog 1
+#define LCD_RD A0 // LCD Read goes to Analog 0
+
+#define LCD_RESET A4 // Can alternately just connect to Arduino's reset pin
+
+// When using the BREAKOUT BOARD only, use these 8 data lines to the LCD:
+// For the Arduino Uno, Duemilanove, Diecimila, etc.:
+//   D0 connects to digital pin 8  (Notice these are
+//   D1 connects to digital pin 9   NOT in order!)
+//   D2 connects to digital pin 2
+//   D3 connects to digital pin 3
+//   D4 connects to digital pin 4
+//   D5 connects to digital pin 5
+//   D6 connects to digital pin 6
+//   D7 connects to digital pin 7
+// For the Arduino Mega, use digital pins 22 through 29
+// (on the 2-row header at the end of the board).
+
+// Assign human-readable names to some common 16-bit color values:
+#define	BLACK   0x0000
+#define	BLUE    0x001F
+#define	RED     0xF800
+#define	GREEN   0x07E0
+#define CYAN    0x07FF
+#define MAGENTA 0xF81F
+#define YELLOW  0xFFE0
+#define WHITE   0xFFFF
+
+Adafruit_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);
+// If using the shield, all control and data lines are fixed, and
+// a simpler declaration can optionally be used:
+// Adafruit_TFTLCD tft;
+
+void setup(void) {
+  Serial.begin(9600);
+  Serial.println(F("TFT LCD test"));
+
+#ifdef USE_ADAFRUIT_SHIELD_PINOUT
+  Serial.println(F("Using Adafruit 2.8\" TFT Arduino Shield Pinout"));
+#else
+  Serial.println(F("Using Adafruit 2.8\" TFT Breakout Board Pinout"));
+#endif
+
+  tft.reset();
+
+  uint16_t identifier = tft.readID();
+
+  if(identifier == 0x9325) {
+    Serial.println(F("Found ILI9325 LCD driver"));
+  } else if(identifier == 0x9328) {
+    Serial.println(F("Found ILI9328 LCD driver"));
+  } else if(identifier == 0x7575) {
+    Serial.println(F("Found HX8347G LCD driver"));
+  } else if(identifier == 0x9341) {
+    Serial.println(F("Found ILI9341 LCD driver"));
+  } else if(identifier == 0x8357) {
+    Serial.println(F("Found HX8357D LCD driver"));
+  } else {
+    Serial.print(F("Unknown LCD driver chip: "));
+    Serial.println(identifier, HEX);
+    Serial.println(F("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
+    Serial.println(F("  #define USE_ADAFRUIT_SHIELD_PINOUT"));
+    Serial.println(F("should appear in the library header (Adafruit_TFT.h)."));
+    Serial.println(F("If using the breakout board, it should NOT be #defined!"));
+    Serial.println(F("Also if using the breakout, double-check that all wiring"));
+    Serial.println(F("matches the tutorial."));
+    return;
+  }
+
+  tft.begin(identifier);
+
+  tft.fillScreen(BLACK);
+
+  Serial.println(F("This is a test of the rotation capabilities of the TFT library!"));
+  Serial.println(F("Press <SEND> (or type a character) to advance"));
+}
+
+void loop(void) {
+  rotatePixel();
+  rotateLine();
+  rotateFastline();
+  rotateDrawrect();
+  rotateFillrect();
+  rotateDrawcircle();
+  rotateFillcircle();
+  rotateText();
+}
+
+void rotateText() {
+  for (uint8_t i=0; i<4; i++) {
+    tft.fillScreen(BLACK);
+    Serial.println(tft.getRotation(), DEC);
+
+    tft.setCursor(0, 30);
+    tft.setTextColor(RED);
+    tft.setTextSize(1);
+    tft.println("Hello World!");
+    tft.setTextColor(YELLOW);
+    tft.setTextSize(2);
+    tft.println("Hello World!");
+    tft.setTextColor(GREEN);
+    tft.setTextSize(3);
+    tft.println("Hello World!");
+    tft.setTextColor(BLUE);
+    tft.setTextSize(4);
+    tft.print(1234.567);
+
+    while (!Serial.available());
+    Serial.read();  Serial.read();  Serial.read();
+
+    tft.setRotation(tft.getRotation()+1);
+  }
+}
+
+void rotateFillcircle(void) {
+  for (uint8_t i=0; i<4; i++) {
+    tft.fillScreen(BLACK);
+    Serial.println(tft.getRotation(), DEC);
+
+    tft.fillCircle(10, 30, 10, YELLOW);
+
+    while (!Serial.available());
+    Serial.read();  Serial.read();  Serial.read();
+
+    tft.setRotation(tft.getRotation()+1);
+  }
+}
+
+void rotateDrawcircle(void) {
+  for (uint8_t i=0; i<4; i++) {
+    tft.fillScreen(BLACK);
+    Serial.println(tft.getRotation(), DEC);
+
+    tft.drawCircle(10, 30, 10, YELLOW);
+
+    while (!Serial.available());
+    Serial.read();  Serial.read();  Serial.read();
+
+    tft.setRotation(tft.getRotation()+1);
+  }
+}
+
+void rotateFillrect(void) {
+  for (uint8_t i=0; i<4; i++) {
+    tft.fillScreen(BLACK);
+    Serial.println(tft.getRotation(), DEC);
+
+    tft.fillRect(10, 20, 10, 20, GREEN);
+
+    while (!Serial.available());
+    Serial.read();  Serial.read();  Serial.read();
+
+    tft.setRotation(tft.getRotation()+1);
+  }
+}
+
+void rotateDrawrect(void) {
+  for (uint8_t i=0; i<4; i++) {
+    tft.fillScreen(BLACK);
+    Serial.println(tft.getRotation(), DEC);
+
+    tft.drawRect(10, 20, 10, 20, GREEN);
+
+    while (!Serial.available());
+    Serial.read();  Serial.read();  Serial.read();
+
+    tft.setRotation(tft.getRotation()+1);
+  }
+}
+
+void rotateFastline(void) {
+  for (uint8_t i=0; i<4; i++) {
+    tft.fillScreen(BLACK);
+    Serial.println(tft.getRotation(), DEC);
+
+    tft.drawFastHLine(0, 20, tft.width(), RED);
+    tft.drawFastVLine(20, 0, tft.height(), BLUE);
+
+    while (!Serial.available());
+    Serial.read();  Serial.read();  Serial.read();
+
+    tft.setRotation(tft.getRotation()+1);
+  }
+}
+
+void rotateLine(void) {
+  for (uint8_t i=0; i<4; i++) {
+    tft.fillScreen(BLACK);
+    Serial.println(tft.getRotation(), DEC);
+
+    tft.drawLine(tft.width()/2, tft.height()/2, 0, 0, RED);
+    while (!Serial.available());
+    Serial.read();  Serial.read();  Serial.read();
+
+    tft.setRotation(tft.getRotation()+1);
+  }
+}
+
+void rotatePixel(void) {
+  for (uint8_t i=0; i<4; i++) {
+    tft.fillScreen(BLACK);
+    Serial.println(tft.getRotation(), DEC);
+
+    tft.drawPixel(10,20, RED);
+    while (!Serial.available());
+    Serial.read();  Serial.read();  Serial.read();
+
+    tft.setRotation(tft.getRotation()+1);
+  }
+}
+
@@ -0,0 +1,248 @@
+// BMP-loading example specifically for the TFTLCD breakout board.
+// If using the Arduino shield, use the tftbmp_shield.pde sketch instead!
+// If using an Arduino Mega make sure to use its hardware SPI pins, OR make
+// sure the SD library is configured for 'soft' SPI in the file Sd2Card.h.
+
+#include <Adafruit_GFX.h>    // Core graphics library
+#include <Adafruit_TFTLCD.h> // Hardware-specific library
+#include <SD.h>
+#include <SPI.h>
+
+// The control pins for the LCD can be assigned to any digital or
+// analog pins...but we'll use the analog pins as this allows us to
+// double up the pins with the touch screen (see the TFT paint example).
+#define LCD_CS A3 // Chip Select goes to Analog 3
+#define LCD_CD A2 // Command/Data goes to Analog 2
+#define LCD_WR A1 // LCD Write goes to Analog 1
+#define LCD_RD A0 // LCD Read goes to Analog 0
+
+// When using the BREAKOUT BOARD only, use these 8 data lines to the LCD:
+// For the Arduino Uno, Duemilanove, Diecimila, etc.:
+//   D0 connects to digital pin 8  (Notice these are
+//   D1 connects to digital pin 9   NOT in order!)
+//   D2 connects to digital pin 2
+//   D3 connects to digital pin 3
+//   D4 connects to digital pin 4
+//   D5 connects to digital pin 5
+//   D6 connects to digital pin 6
+//   D7 connects to digital pin 7
+// For the Arduino Mega, use digital pins 22 through 29
+// (on the 2-row header at the end of the board).
+
+// For Arduino Uno/Duemilanove, etc
+//  connect the SD card with DI going to pin 11, DO going to pin 12 and SCK going to pin 13 (standard)
+//  Then pin 10 goes to CS (or whatever you have set up)
+#define SD_CS 10     // Set the chip select line to whatever you use (10 doesnt conflict with the library)
+
+// In the SD card, place 24 bit color BMP files (be sure they are 24-bit!)
+// There are examples in the sketch folder
+
+// our TFT wiring
+Adafruit_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, A4);
+
+void setup()
+{
+  Serial.begin(9600);
+
+  tft.reset();
+
+  uint16_t identifier = tft.readID();
+
+  if(identifier == 0x9325) {
+    Serial.println(F("Found ILI9325 LCD driver"));
+  } else if(identifier == 0x9328) {
+    Serial.println(F("Found ILI9328 LCD driver"));
+  } else if(identifier == 0x7575) {
+    Serial.println(F("Found HX8347G LCD driver"));
+  } else if(identifier == 0x9341) {
+    Serial.println(F("Found ILI9341 LCD driver"));
+  } else if(identifier == 0x8357) {
+    Serial.println(F("Found HX8357D LCD driver"));
+  } else {
+    Serial.print(F("Unknown LCD driver chip: "));
+    Serial.println(identifier, HEX);
+    Serial.println(F("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
+    Serial.println(F("  #define USE_ADAFRUIT_SHIELD_PINOUT"));
+    Serial.println(F("should appear in the library header (Adafruit_TFT.h)."));
+    Serial.println(F("If using the breakout board, it should NOT be #defined!"));
+    Serial.println(F("Also if using the breakout, double-check that all wiring"));
+    Serial.println(F("matches the tutorial."));
+    return;
+  }
+
+  tft.begin(identifier);
+
+  Serial.print(F("Initializing SD card..."));
+  if (!SD.begin(SD_CS)) {
+    Serial.println(F("failed!"));
+    return;
+  }
+  Serial.println(F("OK!"));
+
+  bmpDraw("woof.bmp", 0, 0);
+  delay(1000);
+}
+
+void loop()
+{
+  for(int i = 0; i<4; i++) {
+    tft.setRotation(i);
+    tft.fillScreen(0);
+    for(int j=0; j <= 200; j += 50) {
+      bmpDraw("miniwoof.bmp", j, j);
+    }
+    delay(1000);
+  }
+}
+
+// This function opens a Windows Bitmap (BMP) file and
+// displays it at the given coordinates.  It's sped up
+// by reading many pixels worth of data at a time
+// (rather than pixel by pixel).  Increasing the buffer
+// size takes more of the Arduino's precious RAM but
+// makes loading a little faster.  20 pixels seems a
+// good balance.
+
+#define BUFFPIXEL 20
+
+void bmpDraw(char *filename, int x, int y) {
+
+  File     bmpFile;
+  int      bmpWidth, bmpHeight;   // W+H in pixels
+  uint8_t  bmpDepth;              // Bit depth (currently must be 24)
+  uint32_t bmpImageoffset;        // Start of image data in file
+  uint32_t rowSize;               // Not always = bmpWidth; may have padding
+  uint8_t  sdbuffer[3*BUFFPIXEL]; // pixel in buffer (R+G+B per pixel)
+  uint16_t lcdbuffer[BUFFPIXEL];  // pixel out buffer (16-bit per pixel)
+  uint8_t  buffidx = sizeof(sdbuffer); // Current position in sdbuffer
+  boolean  goodBmp = false;       // Set to true on valid header parse
+  boolean  flip    = true;        // BMP is stored bottom-to-top
+  int      w, h, row, col;
+  uint8_t  r, g, b;
+  uint32_t pos = 0, startTime = millis();
+  uint8_t  lcdidx = 0;
+  boolean  first = true;
+
+  if((x >= tft.width()) || (y >= tft.height())) return;
+
+  Serial.println();
+  Serial.print(F("Loading image '"));
+  Serial.print(filename);
+  Serial.println('\'');
+  // Open requested file on SD card
+  if ((bmpFile = SD.open(filename)) == NULL) {
+    Serial.println(F("File not found"));
+    return;
+  }
+
+  // Parse BMP header
+  if(read16(bmpFile) == 0x4D42) { // BMP signature
+    Serial.println(F("File size: ")); Serial.println(read32(bmpFile));
+    (void)read32(bmpFile); // Read & ignore creator bytes
+    bmpImageoffset = read32(bmpFile); // Start of image data
+    Serial.print(F("Image Offset: ")); Serial.println(bmpImageoffset, DEC);
+    // Read DIB header
+    Serial.print(F("Header size: ")); Serial.println(read32(bmpFile));
+    bmpWidth  = read32(bmpFile);
+    bmpHeight = read32(bmpFile);
+    if(read16(bmpFile) == 1) { // # planes -- must be '1'
+      bmpDepth = read16(bmpFile); // bits per pixel
+      Serial.print(F("Bit Depth: ")); Serial.println(bmpDepth);
+      if((bmpDepth == 24) && (read32(bmpFile) == 0)) { // 0 = uncompressed
+
+        goodBmp = true; // Supported BMP format -- proceed!
+        Serial.print(F("Image size: "));
+        Serial.print(bmpWidth);
+        Serial.print('x');
+        Serial.println(bmpHeight);
+
+        // BMP rows are padded (if needed) to 4-byte boundary
+        rowSize = (bmpWidth * 3 + 3) & ~3;
+
+        // If bmpHeight is negative, image is in top-down order.
+        // This is not canon but has been observed in the wild.
+        if(bmpHeight < 0) {
+          bmpHeight = -bmpHeight;
+          flip      = false;
+        }
+
+        // Crop area to be loaded
+        w = bmpWidth;
+        h = bmpHeight;
+        if((x+w-1) >= tft.width())  w = tft.width()  - x;
+        if((y+h-1) >= tft.height()) h = tft.height() - y;
+
+        // Set TFT address window to clipped image bounds
+        tft.setAddrWindow(x, y, x+w-1, y+h-1);
+
+        for (row=0; row<h; row++) { // For each scanline...
+          // Seek to start of scan line.  It might seem labor-
+          // intensive to be doing this on every line, but this
+          // method covers a lot of gritty details like cropping
+          // and scanline padding.  Also, the seek only takes
+          // place if the file position actually needs to change
+          // (avoids a lot of cluster math in SD library).
+          if(flip) // Bitmap is stored bottom-to-top order (normal BMP)
+            pos = bmpImageoffset + (bmpHeight - 1 - row) * rowSize;
+          else     // Bitmap is stored top-to-bottom
+            pos = bmpImageoffset + row * rowSize;
+          if(bmpFile.position() != pos) { // Need seek?
+            bmpFile.seek(pos);
+            buffidx = sizeof(sdbuffer); // Force buffer reload
+          }
+
+          for (col=0; col<w; col++) { // For each column...
+            // Time to read more pixel data?
+            if (buffidx >= sizeof(sdbuffer)) { // Indeed
+              // Push LCD buffer to the display first
+              if(lcdidx > 0) {
+                tft.pushColors(lcdbuffer, lcdidx, first);
+                lcdidx = 0;
+                first  = false;
+              }
+              bmpFile.read(sdbuffer, sizeof(sdbuffer));
+              buffidx = 0; // Set index to beginning
+            }
+
+            // Convert pixel from BMP to TFT format
+            b = sdbuffer[buffidx++];
+            g = sdbuffer[buffidx++];
+            r = sdbuffer[buffidx++];
+            lcdbuffer[lcdidx++] = tft.color565(r,g,b);
+          } // end pixel
+        } // end scanline
+        // Write any remaining data to LCD
+        if(lcdidx > 0) {
+          tft.pushColors(lcdbuffer, lcdidx, first);
+        } 
+        Serial.print(F("Loaded in "));
+        Serial.print(millis() - startTime);
+        Serial.println(" ms");
+      } // end goodBmp
+    }
+  }
+
+  bmpFile.close();
+  if(!goodBmp) Serial.println(F("BMP format not recognized."));
+}
+
+// These read 16- and 32-bit types from the SD card file.
+// BMP data is stored little-endian, Arduino is little-endian too.
+// May need to reverse subscript order if porting elsewhere.
+
+uint16_t read16(File f) {
+  uint16_t result;
+  ((uint8_t *)&result)[0] = f.read(); // LSB
+  ((uint8_t *)&result)[1] = f.read(); // MSB
+  return result;
+}
+
+uint32_t read32(File f) {
+  uint32_t result;
+  ((uint8_t *)&result)[0] = f.read(); // LSB
+  ((uint8_t *)&result)[1] = f.read();
+  ((uint8_t *)&result)[2] = f.read();
+  ((uint8_t *)&result)[3] = f.read(); // MSB
+  return result;
+}
+
@@ -0,0 +1,228 @@
+// BMP-loading example specifically for the TFTLCD Arduino shield.
+// If using the breakout board, use the tftbmp.pde sketch instead!
+// If using an Arduino Mega and your sheild does not use the ICSP header for 
+// SPI, make sure the SD library is configured for 'soft' SPI in the file Sd2Card.h.
+// If in doubt, update the library to use 'soft' SPI.
+
+#include <Adafruit_GFX.h>    // Core graphics library
+#include <Adafruit_TFTLCD.h> // Hardware-specific library
+#include <SD.h>
+
+// In the SD card, place 24 bit color BMP files (be sure they are 24-bit!)
+// There are examples in the sketch folder
+
+#define SD_CS 5 // Card select for shield use
+
+Adafruit_TFTLCD tft;
+uint8_t         spi_save;
+
+void setup()
+{
+  Serial.begin(9600);
+ 
+  tft.reset();
+
+  uint16_t identifier = tft.readID();
+
+  if(identifier == 0x9325) {
+    Serial.println(F("Found ILI9325 LCD driver"));
+  } else if(identifier == 0x9328) {
+    Serial.println(F("Found ILI9328 LCD driver"));
+  } else if(identifier == 0x7575) {
+    Serial.println(F("Found HX8347G LCD driver"));
+  } else if(identifier == 0x9341) {
+    Serial.println(F("Found ILI9341 LCD driver"));
+  } else {
+    Serial.print(F("Unknown LCD driver chip: "));
+    Serial.println(identifier, HEX);
+    Serial.println(F("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
+    Serial.println(F("  #define USE_ADAFRUIT_SHIELD_PINOUT"));
+    Serial.println(F("should appear in the library header (Adafruit_TFT.h)."));
+    Serial.println(F("If using the breakout board, it should NOT be #defined!"));
+    Serial.println(F("Also if using the breakout, double-check that all wiring"));
+    Serial.println(F("matches the tutorial."));
+    return;
+  }
+ 
+  tft.begin(identifier);
+
+  Serial.print(F("Initializing SD card..."));
+  if (!SD.begin(SD_CS)) {
+    Serial.println(F("failed!"));
+    return;
+  }
+  Serial.println(F("OK!"));
+  spi_save = SPCR;
+
+  bmpDraw("woof.bmp", 0, 0);
+  delay(1000);
+}
+
+void loop()
+{
+  for(int i = 0; i<4; i++) {
+    tft.setRotation(i);
+    tft.fillScreen(0);
+    for(int j=0; j <= 200; j += 50) {
+      bmpDraw("miniwoof.bmp", j, j);
+    }
+    delay(1000);
+  }
+}
+
+// This function opens a Windows Bitmap (BMP) file and
+// displays it at the given coordinates.  It's sped up
+// by reading many pixels worth of data at a time
+// (rather than pixel by pixel).  Increasing the buffer
+// size takes more of the Arduino's precious RAM but
+// makes loading a little faster.  20 pixels seems a
+// good balance.
+
+#define BUFFPIXEL 20
+
+void bmpDraw(char *filename, int x, int y) {
+  File     bmpFile;
+  int      bmpWidth, bmpHeight;   // W+H in pixels
+  uint8_t  bmpDepth;              // Bit depth (currently must be 24)
+  uint32_t bmpImageoffset;        // Start of image data in file
+  uint32_t rowSize;               // Not always = bmpWidth; may have padding
+  uint8_t  sdbuffer[3*BUFFPIXEL]; // pixel in buffer (R+G+B per pixel)
+  uint16_t lcdbuffer[BUFFPIXEL];  // pixel out buffer (16-bit per pixel)
+  uint8_t  buffidx = sizeof(sdbuffer); // Current position in sdbuffer
+  boolean  goodBmp = false;       // Set to true on valid header parse
+  boolean  flip    = true;        // BMP is stored bottom-to-top
+  int      w, h, row, col;
+  uint8_t  r, g, b;
+  uint32_t pos = 0, startTime = millis();
+  uint8_t  lcdidx = 0;
+  boolean  first = true;
+
+  if((x >= tft.width()) || (y >= tft.height())) return;
+
+  Serial.println();
+  Serial.print("Loading image '");
+  Serial.print(filename);
+  Serial.println('\'');
+  // Open requested file on SD card
+  SPCR = spi_save;
+  if ((bmpFile = SD.open(filename)) == NULL) {
+    Serial.print("File not found");
+    return;
+  }
+
+  // Parse BMP header
+  if(read16(bmpFile) == 0x4D42) { // BMP signature
+    Serial.print(F("File size: ")); Serial.println(read32(bmpFile));
+    (void)read32(bmpFile); // Read & ignore creator bytes
+    bmpImageoffset = read32(bmpFile); // Start of image data
+    Serial.print(F("Image Offset: ")); Serial.println(bmpImageoffset, DEC);
+    // Read DIB header
+    Serial.print(F("Header size: ")); Serial.println(read32(bmpFile));
+    bmpWidth  = read32(bmpFile);
+    bmpHeight = read32(bmpFile);
+    if(read16(bmpFile) == 1) { // # planes -- must be '1'
+      bmpDepth = read16(bmpFile); // bits per pixel
+      Serial.print(F("Bit Depth: ")); Serial.println(bmpDepth);
+      if((bmpDepth == 24) && (read32(bmpFile) == 0)) { // 0 = uncompressed
+
+        goodBmp = true; // Supported BMP format -- proceed!
+        Serial.print(F("Image size: "));
+        Serial.print(bmpWidth);
+        Serial.print('x');
+        Serial.println(bmpHeight);
+
+        // BMP rows are padded (if needed) to 4-byte boundary
+        rowSize = (bmpWidth * 3 + 3) & ~3;
+
+        // If bmpHeight is negative, image is in top-down order.
+        // This is not canon but has been observed in the wild.
+        if(bmpHeight < 0) {
+          bmpHeight = -bmpHeight;
+          flip      = false;
+        }
+
+        // Crop area to be loaded
+        w = bmpWidth;
+        h = bmpHeight;
+        if((x+w-1) >= tft.width())  w = tft.width()  - x;
+        if((y+h-1) >= tft.height()) h = tft.height() - y;
+
+        // Set TFT address window to clipped image bounds
+        SPCR = 0;
+        tft.setAddrWindow(x, y, x+w-1, y+h-1);
+
+        for (row=0; row<h; row++) { // For each scanline...
+          // Seek to start of scan line.  It might seem labor-
+          // intensive to be doing this on every line, but this
+          // method covers a lot of gritty details like cropping
+          // and scanline padding.  Also, the seek only takes
+          // place if the file position actually needs to change
+          // (avoids a lot of cluster math in SD library).
+          if(flip) // Bitmap is stored bottom-to-top order (normal BMP)
+            pos = bmpImageoffset + (bmpHeight - 1 - row) * rowSize;
+          else     // Bitmap is stored top-to-bottom
+            pos = bmpImageoffset + row * rowSize;
+          SPCR = spi_save;
+          if(bmpFile.position() != pos) { // Need seek?
+            bmpFile.seek(pos);
+            buffidx = sizeof(sdbuffer); // Force buffer reload
+          }
+
+          for (col=0; col<w; col++) { // For each column...
+            // Time to read more pixel data?
+            if (buffidx >= sizeof(sdbuffer)) { // Indeed
+              // Push LCD buffer to the display first
+              if(lcdidx > 0) {
+                SPCR   = 0;
+                tft.pushColors(lcdbuffer, lcdidx, first);
+                lcdidx = 0;
+                first  = false;
+              }
+              SPCR = spi_save;
+              bmpFile.read(sdbuffer, sizeof(sdbuffer));
+              buffidx = 0; // Set index to beginning
+            }
+
+            // Convert pixel from BMP to TFT format
+            b = sdbuffer[buffidx++];
+            g = sdbuffer[buffidx++];
+            r = sdbuffer[buffidx++];
+            lcdbuffer[lcdidx++] = tft.color565(r,g,b);
+          } // end pixel
+        } // end scanline
+        // Write any remaining data to LCD
+        if(lcdidx > 0) {
+          SPCR = 0;
+          tft.pushColors(lcdbuffer, lcdidx, first);
+        } 
+        Serial.print(F("Loaded in "));
+        Serial.print(millis() - startTime);
+        Serial.println(" ms");
+      } // end goodBmp
+    }
+  }
+
+  bmpFile.close();
+  if(!goodBmp) Serial.println("BMP format not recognized.");
+}
+
+// These read 16- and 32-bit types from the SD card file.
+// BMP data is stored little-endian, Arduino is little-endian too.
+// May need to reverse subscript order if porting elsewhere.
+
+uint16_t read16(File f) {
+  uint16_t result;
+  ((uint8_t *)&result)[0] = f.read(); // LSB
+  ((uint8_t *)&result)[1] = f.read(); // MSB
+  return result;
+}
+
+uint32_t read32(File f) {
+  uint32_t result;
+  ((uint8_t *)&result)[0] = f.read(); // LSB
+  ((uint8_t *)&result)[1] = f.read();
+  ((uint8_t *)&result)[2] = f.read();
+  ((uint8_t *)&result)[3] = f.read(); // MSB
+  return result;
+}
+
@@ -0,0 +1,209 @@
+// Paint example specifically for the TFTLCD breakout board.
+// If using the Arduino shield, use the tftpaint_shield.pde sketch instead!
+// DOES NOT CURRENTLY WORK ON ARDUINO LEONARDO
+
+#include <Adafruit_GFX.h>    // Core graphics library
+#include <Adafruit_TFTLCD.h> // Hardware-specific library
+#include <TouchScreen.h>
+
+#if defined(__SAM3X8E__)
+    #undef __FlashStringHelper::F(string_literal)
+    #define F(string_literal) string_literal
+#endif
+
+// When using the BREAKOUT BOARD only, use these 8 data lines to the LCD:
+// For the Arduino Uno, Duemilanove, Diecimila, etc.:
+//   D0 connects to digital pin 8  (Notice these are
+//   D1 connects to digital pin 9   NOT in order!)
+//   D2 connects to digital pin 2
+//   D3 connects to digital pin 3
+//   D4 connects to digital pin 4
+//   D5 connects to digital pin 5
+//   D6 connects to digital pin 6
+//   D7 connects to digital pin 7
+
+// For the Arduino Mega, use digital pins 22 through 29
+// (on the 2-row header at the end of the board).
+//   D0 connects to digital pin 22
+//   D1 connects to digital pin 23
+//   D2 connects to digital pin 24
+//   D3 connects to digital pin 25
+//   D4 connects to digital pin 26
+//   D5 connects to digital pin 27
+//   D6 connects to digital pin 28
+//   D7 connects to digital pin 29
+
+// For the Arduino Due, use digital pins 33 through 40
+// (on the 2-row header at the end of the board).
+//   D0 connects to digital pin 33
+//   D1 connects to digital pin 34
+//   D2 connects to digital pin 35
+//   D3 connects to digital pin 36
+//   D4 connects to digital pin 37
+//   D5 connects to digital pin 38
+//   D6 connects to digital pin 39
+//   D7 connects to digital pin 40
+
+#define YP A3  // must be an analog pin, use "An" notation!
+#define XM A2  // must be an analog pin, use "An" notation!
+#define YM 9   // can be a digital pin
+#define XP 8   // can be a digital pin
+
+#define TS_MINX 150
+#define TS_MINY 120
+#define TS_MAXX 920
+#define TS_MAXY 940
+
+// For better pressure precision, we need to know the resistance
+// between X+ and X- Use any multimeter to read it
+// For the one we're using, its 300 ohms across the X plate
+TouchScreen ts = TouchScreen(XP, YP, XM, YM, 300);
+
+#define LCD_CS A3
+#define LCD_CD A2
+#define LCD_WR A1
+#define LCD_RD A0
+// optional
+#define LCD_RESET A4
+
+// Assign human-readable names to some common 16-bit color values:
+#define	BLACK   0x0000
+#define	BLUE    0x001F
+#define	RED     0xF800
+#define	GREEN   0x07E0
+#define CYAN    0x07FF
+#define MAGENTA 0xF81F
+#define YELLOW  0xFFE0
+#define WHITE   0xFFFF
+
+
+Adafruit_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);
+
+#define BOXSIZE 40
+#define PENRADIUS 3
+int oldcolor, currentcolor;
+
+void setup(void) {
+  Serial.begin(9600);
+  Serial.println(F("Paint!"));
+  
+  tft.reset();
+  
+  uint16_t identifier = tft.readID();
+
+  if(identifier == 0x9325) {
+    Serial.println(F("Found ILI9325 LCD driver"));
+  } else if(identifier == 0x9328) {
+    Serial.println(F("Found ILI9328 LCD driver"));
+  } else if(identifier == 0x7575) {
+    Serial.println(F("Found HX8347G LCD driver"));
+  } else if(identifier == 0x9341) {
+    Serial.println(F("Found ILI9341 LCD driver"));
+  } else if(identifier == 0x8357) {
+    Serial.println(F("Found HX8357D LCD driver"));
+  } else {
+    Serial.print(F("Unknown LCD driver chip: "));
+    Serial.println(identifier, HEX);
+    Serial.println(F("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
+    Serial.println(F("  #define USE_ADAFRUIT_SHIELD_PINOUT"));
+    Serial.println(F("should appear in the library header (Adafruit_TFT.h)."));
+    Serial.println(F("If using the breakout board, it should NOT be #defined!"));
+    Serial.println(F("Also if using the breakout, double-check that all wiring"));
+    Serial.println(F("matches the tutorial."));
+    return;
+  }
+
+  tft.begin(identifier);
+
+  tft.fillScreen(BLACK);
+
+  tft.fillRect(0, 0, BOXSIZE, BOXSIZE, RED);
+  tft.fillRect(BOXSIZE, 0, BOXSIZE, BOXSIZE, YELLOW);
+  tft.fillRect(BOXSIZE*2, 0, BOXSIZE, BOXSIZE, GREEN);
+  tft.fillRect(BOXSIZE*3, 0, BOXSIZE, BOXSIZE, CYAN);
+  tft.fillRect(BOXSIZE*4, 0, BOXSIZE, BOXSIZE, BLUE);
+  tft.fillRect(BOXSIZE*5, 0, BOXSIZE, BOXSIZE, MAGENTA);
+  // tft.fillRect(BOXSIZE*6, 0, BOXSIZE, BOXSIZE, WHITE);
+ 
+  tft.drawRect(0, 0, BOXSIZE, BOXSIZE, WHITE);
+  currentcolor = RED;
+ 
+  pinMode(13, OUTPUT);
+}
+
+#define MINPRESSURE 10
+#define MAXPRESSURE 1000
+
+void loop()
+{
+  digitalWrite(13, HIGH);
+  TSPoint p = ts.getPoint();
+  digitalWrite(13, LOW);
+
+  // if sharing pins, you'll need to fix the directions of the touchscreen pins
+  //pinMode(XP, OUTPUT);
+  pinMode(XM, OUTPUT);
+  pinMode(YP, OUTPUT);
+  //pinMode(YM, OUTPUT);
+
+  // we have some minimum pressure we consider 'valid'
+  // pressure of 0 means no pressing!
+
+  if (p.z > MINPRESSURE && p.z < MAXPRESSURE) {
+    /*
+    Serial.print("X = "); Serial.print(p.x);
+    Serial.print("\tY = "); Serial.print(p.y);
+    Serial.print("\tPressure = "); Serial.println(p.z);
+    */
+    
+    if (p.y < (TS_MINY-5)) {
+      Serial.println("erase");
+      // press the bottom of the screen to erase 
+      tft.fillRect(0, BOXSIZE, tft.width(), tft.height()-BOXSIZE, BLACK);
+    }
+    // scale from 0->1023 to tft.width
+    p.x = map(p.x, TS_MINX, TS_MAXX, tft.width(), 0);
+    p.y = map(p.y, TS_MINY, TS_MAXY, tft.height(), 0);
+    /*
+    Serial.print("("); Serial.print(p.x);
+    Serial.print(", "); Serial.print(p.y);
+    Serial.println(")");
+    */
+    if (p.y < BOXSIZE) {
+       oldcolor = currentcolor;
+
+       if (p.x < BOXSIZE) { 
+         currentcolor = RED; 
+         tft.drawRect(0, 0, BOXSIZE, BOXSIZE, WHITE);
+       } else if (p.x < BOXSIZE*2) {
+         currentcolor = YELLOW;
+         tft.drawRect(BOXSIZE, 0, BOXSIZE, BOXSIZE, WHITE);
+       } else if (p.x < BOXSIZE*3) {
+         currentcolor = GREEN;
+         tft.drawRect(BOXSIZE*2, 0, BOXSIZE, BOXSIZE, WHITE);
+       } else if (p.x < BOXSIZE*4) {
+         currentcolor = CYAN;
+         tft.drawRect(BOXSIZE*3, 0, BOXSIZE, BOXSIZE, WHITE);
+       } else if (p.x < BOXSIZE*5) {
+         currentcolor = BLUE;
+         tft.drawRect(BOXSIZE*4, 0, BOXSIZE, BOXSIZE, WHITE);
+       } else if (p.x < BOXSIZE*6) {
+         currentcolor = MAGENTA;
+         tft.drawRect(BOXSIZE*5, 0, BOXSIZE, BOXSIZE, WHITE);
+       }
+
+       if (oldcolor != currentcolor) {
+          if (oldcolor == RED) tft.fillRect(0, 0, BOXSIZE, BOXSIZE, RED);
+          if (oldcolor == YELLOW) tft.fillRect(BOXSIZE, 0, BOXSIZE, BOXSIZE, YELLOW);
+          if (oldcolor == GREEN) tft.fillRect(BOXSIZE*2, 0, BOXSIZE, BOXSIZE, GREEN);
+          if (oldcolor == CYAN) tft.fillRect(BOXSIZE*3, 0, BOXSIZE, BOXSIZE, CYAN);
+          if (oldcolor == BLUE) tft.fillRect(BOXSIZE*4, 0, BOXSIZE, BOXSIZE, BLUE);
+          if (oldcolor == MAGENTA) tft.fillRect(BOXSIZE*5, 0, BOXSIZE, BOXSIZE, MAGENTA);
+       }
+    }
+    if (((p.y-PENRADIUS) > BOXSIZE) && ((p.y+PENRADIUS) < tft.height())) {
+      tft.fillCircle(p.x, p.y, PENRADIUS, currentcolor);
+    }
+  }
+}
+
@@ -0,0 +1,264 @@
+
+#ifndef FONT5X7_H
+#define FONT5X7_H
+
+// standard ascii 5x7 font
+
+static unsigned char  font[]  = {
+        0x00, 0x00, 0x00, 0x00, 0x00,   
+	0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 	
+	0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 	
+	0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 
+	0x18, 0x3C, 0x7E, 0x3C, 0x18, 
+	0x1C, 0x57, 0x7D, 0x57, 0x1C, 
+	0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 
+	0x00, 0x18, 0x3C, 0x18, 0x00, 
+	0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 
+	0x00, 0x18, 0x24, 0x18, 0x00, 
+	0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 
+	0x30, 0x48, 0x3A, 0x06, 0x0E, 
+	0x26, 0x29, 0x79, 0x29, 0x26, 
+	0x40, 0x7F, 0x05, 0x05, 0x07, 
+	0x40, 0x7F, 0x05, 0x25, 0x3F, 
+	0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 
+	0x7F, 0x3E, 0x1C, 0x1C, 0x08, 
+	0x08, 0x1C, 0x1C, 0x3E, 0x7F, 
+	0x14, 0x22, 0x7F, 0x22, 0x14, 
+	0x5F, 0x5F, 0x00, 0x5F, 0x5F, 
+	0x06, 0x09, 0x7F, 0x01, 0x7F, 
+	0x00, 0x66, 0x89, 0x95, 0x6A, 
+	0x60, 0x60, 0x60, 0x60, 0x60, 
+	0x94, 0xA2, 0xFF, 0xA2, 0x94, 
+	0x08, 0x04, 0x7E, 0x04, 0x08, 
+	0x10, 0x20, 0x7E, 0x20, 0x10, 
+	0x08, 0x08, 0x2A, 0x1C, 0x08, 
+	0x08, 0x1C, 0x2A, 0x08, 0x08, 
+	0x1E, 0x10, 0x10, 0x10, 0x10, 
+	0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 
+	0x30, 0x38, 0x3E, 0x38, 0x30, 
+	0x06, 0x0E, 0x3E, 0x0E, 0x06, 
+	0x00, 0x00, 0x00, 0x00, 0x00, 
+	0x00, 0x00, 0x5F, 0x00, 0x00, 
+	0x00, 0x07, 0x00, 0x07, 0x00, 
+	0x14, 0x7F, 0x14, 0x7F, 0x14, 
+	0x24, 0x2A, 0x7F, 0x2A, 0x12, 
+	0x23, 0x13, 0x08, 0x64, 0x62, 
+	0x36, 0x49, 0x56, 0x20, 0x50, 
+	0x00, 0x08, 0x07, 0x03, 0x00, 
+	0x00, 0x1C, 0x22, 0x41, 0x00, 
+	0x00, 0x41, 0x22, 0x1C, 0x00, 
+	0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 
+	0x08, 0x08, 0x3E, 0x08, 0x08, 
+	0x00, 0x80, 0x70, 0x30, 0x00, 
+	0x08, 0x08, 0x08, 0x08, 0x08, 
+	0x00, 0x00, 0x60, 0x60, 0x00, 
+	0x20, 0x10, 0x08, 0x04, 0x02, 
+	0x3E, 0x51, 0x49, 0x45, 0x3E, 
+	0x00, 0x42, 0x7F, 0x40, 0x00, 
+	0x72, 0x49, 0x49, 0x49, 0x46, 
+	0x21, 0x41, 0x49, 0x4D, 0x33, 
+	0x18, 0x14, 0x12, 0x7F, 0x10, 
+	0x27, 0x45, 0x45, 0x45, 0x39, 
+	0x3C, 0x4A, 0x49, 0x49, 0x31, 
+	0x41, 0x21, 0x11, 0x09, 0x07, 
+	0x36, 0x49, 0x49, 0x49, 0x36, 
+	0x46, 0x49, 0x49, 0x29, 0x1E, 
+	0x00, 0x00, 0x14, 0x00, 0x00, 
+	0x00, 0x40, 0x34, 0x00, 0x00, 
+	0x00, 0x08, 0x14, 0x22, 0x41, 
+	0x14, 0x14, 0x14, 0x14, 0x14, 
+	0x00, 0x41, 0x22, 0x14, 0x08, 
+	0x02, 0x01, 0x59, 0x09, 0x06, 
+	0x3E, 0x41, 0x5D, 0x59, 0x4E, 
+	0x7C, 0x12, 0x11, 0x12, 0x7C, 
+	0x7F, 0x49, 0x49, 0x49, 0x36, 
+	0x3E, 0x41, 0x41, 0x41, 0x22, 
+	0x7F, 0x41, 0x41, 0x41, 0x3E, 
+	0x7F, 0x49, 0x49, 0x49, 0x41, 
+	0x7F, 0x09, 0x09, 0x09, 0x01, 
+	0x3E, 0x41, 0x41, 0x51, 0x73, 
+	0x7F, 0x08, 0x08, 0x08, 0x7F, 
+	0x00, 0x41, 0x7F, 0x41, 0x00, 
+	0x20, 0x40, 0x41, 0x3F, 0x01, 
+	0x7F, 0x08, 0x14, 0x22, 0x41, 
+	0x7F, 0x40, 0x40, 0x40, 0x40, 
+	0x7F, 0x02, 0x1C, 0x02, 0x7F, 
+	0x7F, 0x04, 0x08, 0x10, 0x7F, 
+	0x3E, 0x41, 0x41, 0x41, 0x3E, 
+	0x7F, 0x09, 0x09, 0x09, 0x06, 
+	0x3E, 0x41, 0x51, 0x21, 0x5E, 
+	0x7F, 0x09, 0x19, 0x29, 0x46, 
+	0x26, 0x49, 0x49, 0x49, 0x32, 
+	0x03, 0x01, 0x7F, 0x01, 0x03, 
+	0x3F, 0x40, 0x40, 0x40, 0x3F, 
+	0x1F, 0x20, 0x40, 0x20, 0x1F, 
+	0x3F, 0x40, 0x38, 0x40, 0x3F, 
+	0x63, 0x14, 0x08, 0x14, 0x63, 
+	0x03, 0x04, 0x78, 0x04, 0x03, 
+	0x61, 0x59, 0x49, 0x4D, 0x43, 
+	0x00, 0x7F, 0x41, 0x41, 0x41, 
+	0x02, 0x04, 0x08, 0x10, 0x20, 
+	0x00, 0x41, 0x41, 0x41, 0x7F, 
+	0x04, 0x02, 0x01, 0x02, 0x04, 
+	0x40, 0x40, 0x40, 0x40, 0x40, 
+	0x00, 0x03, 0x07, 0x08, 0x00, 
+	0x20, 0x54, 0x54, 0x78, 0x40, 
+	0x7F, 0x28, 0x44, 0x44, 0x38, 
+	0x38, 0x44, 0x44, 0x44, 0x28, 
+	0x38, 0x44, 0x44, 0x28, 0x7F, 
+	0x38, 0x54, 0x54, 0x54, 0x18, 
+	0x00, 0x08, 0x7E, 0x09, 0x02, 
+	0x18, 0xA4, 0xA4, 0x9C, 0x78, 
+	0x7F, 0x08, 0x04, 0x04, 0x78, 
+	0x00, 0x44, 0x7D, 0x40, 0x00, 
+	0x20, 0x40, 0x40, 0x3D, 0x00, 
+	0x7F, 0x10, 0x28, 0x44, 0x00, 
+	0x00, 0x41, 0x7F, 0x40, 0x00, 
+	0x7C, 0x04, 0x78, 0x04, 0x78, 
+	0x7C, 0x08, 0x04, 0x04, 0x78, 
+	0x38, 0x44, 0x44, 0x44, 0x38, 
+	0xFC, 0x18, 0x24, 0x24, 0x18, 
+	0x18, 0x24, 0x24, 0x18, 0xFC, 
+	0x7C, 0x08, 0x04, 0x04, 0x08, 
+	0x48, 0x54, 0x54, 0x54, 0x24, 
+	0x04, 0x04, 0x3F, 0x44, 0x24, 
+	0x3C, 0x40, 0x40, 0x20, 0x7C, 
+	0x1C, 0x20, 0x40, 0x20, 0x1C, 
+	0x3C, 0x40, 0x30, 0x40, 0x3C, 
+	0x44, 0x28, 0x10, 0x28, 0x44, 
+	0x4C, 0x90, 0x90, 0x90, 0x7C, 
+	0x44, 0x64, 0x54, 0x4C, 0x44, 
+	0x00, 0x08, 0x36, 0x41, 0x00, 
+	0x00, 0x00, 0x77, 0x00, 0x00, 
+	0x00, 0x41, 0x36, 0x08, 0x00, 
+	0x02, 0x01, 0x02, 0x04, 0x02, 
+	0x3C, 0x26, 0x23, 0x26, 0x3C, 
+	0x1E, 0xA1, 0xA1, 0x61, 0x12, 
+	0x3A, 0x40, 0x40, 0x20, 0x7A, 
+	0x38, 0x54, 0x54, 0x55, 0x59, 
+	0x21, 0x55, 0x55, 0x79, 0x41, 
+	0x21, 0x54, 0x54, 0x78, 0x41, 
+	0x21, 0x55, 0x54, 0x78, 0x40, 
+	0x20, 0x54, 0x55, 0x79, 0x40, 
+	0x0C, 0x1E, 0x52, 0x72, 0x12, 
+	0x39, 0x55, 0x55, 0x55, 0x59, 
+	0x39, 0x54, 0x54, 0x54, 0x59, 
+	0x39, 0x55, 0x54, 0x54, 0x58, 
+	0x00, 0x00, 0x45, 0x7C, 0x41, 
+	0x00, 0x02, 0x45, 0x7D, 0x42, 
+	0x00, 0x01, 0x45, 0x7C, 0x40, 
+	0xF0, 0x29, 0x24, 0x29, 0xF0, 
+	0xF0, 0x28, 0x25, 0x28, 0xF0, 
+	0x7C, 0x54, 0x55, 0x45, 0x00, 
+	0x20, 0x54, 0x54, 0x7C, 0x54, 
+	0x7C, 0x0A, 0x09, 0x7F, 0x49, 
+	0x32, 0x49, 0x49, 0x49, 0x32, 
+	0x32, 0x48, 0x48, 0x48, 0x32, 
+	0x32, 0x4A, 0x48, 0x48, 0x30, 
+	0x3A, 0x41, 0x41, 0x21, 0x7A, 
+	0x3A, 0x42, 0x40, 0x20, 0x78, 
+	0x00, 0x9D, 0xA0, 0xA0, 0x7D, 
+	0x39, 0x44, 0x44, 0x44, 0x39, 
+	0x3D, 0x40, 0x40, 0x40, 0x3D, 
+	0x3C, 0x24, 0xFF, 0x24, 0x24, 
+	0x48, 0x7E, 0x49, 0x43, 0x66, 
+	0x2B, 0x2F, 0xFC, 0x2F, 0x2B, 
+	0xFF, 0x09, 0x29, 0xF6, 0x20, 
+	0xC0, 0x88, 0x7E, 0x09, 0x03, 
+	0x20, 0x54, 0x54, 0x79, 0x41, 
+	0x00, 0x00, 0x44, 0x7D, 0x41, 
+	0x30, 0x48, 0x48, 0x4A, 0x32, 
+	0x38, 0x40, 0x40, 0x22, 0x7A, 
+	0x00, 0x7A, 0x0A, 0x0A, 0x72, 
+	0x7D, 0x0D, 0x19, 0x31, 0x7D, 
+	0x26, 0x29, 0x29, 0x2F, 0x28, 
+	0x26, 0x29, 0x29, 0x29, 0x26, 
+	0x30, 0x48, 0x4D, 0x40, 0x20, 
+	0x38, 0x08, 0x08, 0x08, 0x08, 
+	0x08, 0x08, 0x08, 0x08, 0x38, 
+	0x2F, 0x10, 0xC8, 0xAC, 0xBA, 
+	0x2F, 0x10, 0x28, 0x34, 0xFA, 
+	0x00, 0x00, 0x7B, 0x00, 0x00, 
+	0x08, 0x14, 0x2A, 0x14, 0x22, 
+	0x22, 0x14, 0x2A, 0x14, 0x08, 
+	0xAA, 0x00, 0x55, 0x00, 0xAA, 
+	0xAA, 0x55, 0xAA, 0x55, 0xAA, 
+	0x00, 0x00, 0x00, 0xFF, 0x00, 
+	0x10, 0x10, 0x10, 0xFF, 0x00, 
+	0x14, 0x14, 0x14, 0xFF, 0x00, 
+	0x10, 0x10, 0xFF, 0x00, 0xFF, 
+	0x10, 0x10, 0xF0, 0x10, 0xF0, 
+	0x14, 0x14, 0x14, 0xFC, 0x00, 
+	0x14, 0x14, 0xF7, 0x00, 0xFF, 
+	0x00, 0x00, 0xFF, 0x00, 0xFF, 
+	0x14, 0x14, 0xF4, 0x04, 0xFC, 
+	0x14, 0x14, 0x17, 0x10, 0x1F, 
+	0x10, 0x10, 0x1F, 0x10, 0x1F, 
+	0x14, 0x14, 0x14, 0x1F, 0x00, 
+	0x10, 0x10, 0x10, 0xF0, 0x00, 
+	0x00, 0x00, 0x00, 0x1F, 0x10, 
+	0x10, 0x10, 0x10, 0x1F, 0x10, 
+	0x10, 0x10, 0x10, 0xF0, 0x10, 
+	0x00, 0x00, 0x00, 0xFF, 0x10, 
+	0x10, 0x10, 0x10, 0x10, 0x10, 
+	0x10, 0x10, 0x10, 0xFF, 0x10, 
+	0x00, 0x00, 0x00, 0xFF, 0x14, 
+	0x00, 0x00, 0xFF, 0x00, 0xFF, 
+	0x00, 0x00, 0x1F, 0x10, 0x17, 
+	0x00, 0x00, 0xFC, 0x04, 0xF4, 
+	0x14, 0x14, 0x17, 0x10, 0x17, 
+	0x14, 0x14, 0xF4, 0x04, 0xF4, 
+	0x00, 0x00, 0xFF, 0x00, 0xF7, 
+	0x14, 0x14, 0x14, 0x14, 0x14, 
+	0x14, 0x14, 0xF7, 0x00, 0xF7, 
+	0x14, 0x14, 0x14, 0x17, 0x14, 
+	0x10, 0x10, 0x1F, 0x10, 0x1F, 
+	0x14, 0x14, 0x14, 0xF4, 0x14, 
+	0x10, 0x10, 0xF0, 0x10, 0xF0, 
+	0x00, 0x00, 0x1F, 0x10, 0x1F, 
+	0x00, 0x00, 0x00, 0x1F, 0x14, 
+	0x00, 0x00, 0x00, 0xFC, 0x14, 
+	0x00, 0x00, 0xF0, 0x10, 0xF0, 
+	0x10, 0x10, 0xFF, 0x10, 0xFF, 
+	0x14, 0x14, 0x14, 0xFF, 0x14, 
+	0x10, 0x10, 0x10, 0x1F, 0x00, 
+	0x00, 0x00, 0x00, 0xF0, 0x10, 
+	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 
+	0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 
+	0xFF, 0xFF, 0xFF, 0x00, 0x00, 
+	0x00, 0x00, 0x00, 0xFF, 0xFF, 
+	0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 
+	0x38, 0x44, 0x44, 0x38, 0x44, 
+	0x7C, 0x2A, 0x2A, 0x3E, 0x14, 
+	0x7E, 0x02, 0x02, 0x06, 0x06, 
+	0x02, 0x7E, 0x02, 0x7E, 0x02, 
+	0x63, 0x55, 0x49, 0x41, 0x63, 
+	0x38, 0x44, 0x44, 0x3C, 0x04, 
+	0x40, 0x7E, 0x20, 0x1E, 0x20, 
+	0x06, 0x02, 0x7E, 0x02, 0x02, 
+	0x99, 0xA5, 0xE7, 0xA5, 0x99, 
+	0x1C, 0x2A, 0x49, 0x2A, 0x1C, 
+	0x4C, 0x72, 0x01, 0x72, 0x4C, 
+	0x30, 0x4A, 0x4D, 0x4D, 0x30, 
+	0x30, 0x48, 0x78, 0x48, 0x30, 
+	0xBC, 0x62, 0x5A, 0x46, 0x3D, 
+	0x3E, 0x49, 0x49, 0x49, 0x00, 
+	0x7E, 0x01, 0x01, 0x01, 0x7E, 
+	0x2A, 0x2A, 0x2A, 0x2A, 0x2A, 
+	0x44, 0x44, 0x5F, 0x44, 0x44, 
+	0x40, 0x51, 0x4A, 0x44, 0x40, 
+	0x40, 0x44, 0x4A, 0x51, 0x40, 
+	0x00, 0x00, 0xFF, 0x01, 0x03, 
+	0xE0, 0x80, 0xFF, 0x00, 0x00, 
+	0x08, 0x08, 0x6B, 0x6B, 0x08,
+	0x36, 0x12, 0x36, 0x24, 0x36, 
+	0x06, 0x0F, 0x09, 0x0F, 0x06, 
+	0x00, 0x00, 0x18, 0x18, 0x00, 
+	0x00, 0x00, 0x10, 0x10, 0x00, 
+	0x30, 0x40, 0xFF, 0x01, 0x01, 
+	0x00, 0x1F, 0x01, 0x01, 0x1E, 
+	0x00, 0x19, 0x1D, 0x17, 0x12, 
+	0x00, 0x3C, 0x3C, 0x3C, 0x3C, 
+	0x00, 0x00, 0x00, 0x00, 0x00, 
+};
+#endif
@@ -0,0 +1,175 @@
+// Paint example specifically for the TFTLCD Arduino shield.
+// If using the breakout board, use the tftpaint.pde sketch instead!
+
+#include <Adafruit_GFX.h>    // Core graphics library
+#include <Adafruit_TFTLCD.h> // Hardware-specific library
+#include <TouchScreen.h>
+
+#if defined(__SAM3X8E__)
+    #undef __FlashStringHelper::F(string_literal)
+    #define F(string_literal) string_literal
+#endif
+
+#ifndef USE_ADAFRUIT_SHIELD_PINOUT 
+ #error "This sketch is intended for use with the TFT LCD Shield. Make sure that USE_ADAFRUIT_SHIELD_PINOUT is #defined in the Adafruit_TFTLCD.h library file."
+#endif
+
+// These are the pins for the shield!
+#define YP A1  // must be an analog pin, use "An" notation!
+#define XM A2  // must be an analog pin, use "An" notation!
+#define YM 7   // can be a digital pin
+#define XP 6   // can be a digital pin
+
+#ifdef __SAM3X8E__
+  #define TS_MINX 125
+  #define TS_MINY 170
+  #define TS_MAXX 880
+  #define TS_MAXY 940
+#else
+  #define TS_MINX  150
+  #define TS_MINY  120
+  #define TS_MAXX  920
+  #define TS_MAXY  940
+#endif
+
+// For better pressure precision, we need to know the resistance
+// between X+ and X- Use any multimeter to read it
+// For the one we're using, its 300 ohms across the X plate
+TouchScreen ts = TouchScreen(XP, YP, XM, YM, 300);
+
+#define LCD_CS A3
+#define LCD_CD A2
+#define LCD_WR A1
+#define LCD_RD A0
+
+// Assign human-readable names to some common 16-bit color values:
+#define	BLACK   0x0000
+#define	BLUE    0x001F
+#define	RED     0xF800
+#define	GREEN   0x07E0
+#define CYAN    0x07FF
+#define MAGENTA 0xF81F
+#define YELLOW  0xFFE0
+#define WHITE   0xFFFF
+
+
+Adafruit_TFTLCD tft;
+
+#define BOXSIZE   40
+#define PENRADIUS  4
+int oldcolor, currentcolor;
+
+void setup(void) {
+  Serial.begin(9600);
+  Serial.println(F("Paint!"));
+
+  tft.reset();
+
+  uint16_t identifier = tft.readID();
+
+  if(identifier == 0x9325) {
+    Serial.println(F("Found ILI9325 LCD driver"));
+  } else if(identifier == 0x9328) {
+    Serial.println(F("Found ILI9328 LCD driver"));
+  } else if(identifier == 0x7575) {
+    Serial.println(F("Found HX8347G LCD driver"));
+  } else {
+    Serial.print(F("Unknown LCD driver chip: "));
+    Serial.println(identifier, HEX);
+    return;
+  }
+
+  tft.begin(identifier);
+
+  tft.fillScreen(BLACK);
+
+  tft.fillRect(0, 0, BOXSIZE, BOXSIZE, RED);
+  tft.fillRect(BOXSIZE, 0, BOXSIZE, BOXSIZE, YELLOW);
+  tft.fillRect(BOXSIZE*2, 0, BOXSIZE, BOXSIZE, GREEN);
+  tft.fillRect(BOXSIZE*3, 0, BOXSIZE, BOXSIZE, CYAN);
+  tft.fillRect(BOXSIZE*4, 0, BOXSIZE, BOXSIZE, BLUE);
+  tft.fillRect(BOXSIZE*5, 0, BOXSIZE, BOXSIZE, MAGENTA);
+  // tft.fillRect(BOXSIZE*6, 0, BOXSIZE, BOXSIZE, WHITE);
+ 
+  tft.drawRect(0, 0, BOXSIZE, BOXSIZE, WHITE);
+  currentcolor = RED;
+ 
+  pinMode(13, OUTPUT);
+}
+
+#define MINPRESSURE 10
+#define MAXPRESSURE 1000
+
+void loop()
+{
+  digitalWrite(13, HIGH);
+  TSPoint p = ts.getPoint();
+  digitalWrite(13, LOW);
+
+  // if sharing pins, you'll need to fix the directions of the touchscreen pins
+  //pinMode(XP, OUTPUT);
+  pinMode(XM, OUTPUT);
+  pinMode(YP, OUTPUT);
+  //pinMode(YM, OUTPUT);
+
+  // we have some minimum pressure we consider 'valid'
+  // pressure of 0 means no pressing!
+
+  if (p.z > MINPRESSURE && p.z < MAXPRESSURE) {
+    /*
+    Serial.print("X = "); Serial.print(p.x);
+    Serial.print("\tY = "); Serial.print(p.y);
+    Serial.print("\tPressure = "); Serial.println(p.z);
+    */
+    
+    if (p.y < (TS_MINY-5)) {
+      Serial.println("erase");
+      // press the bottom of the screen to erase 
+      tft.fillRect(0, BOXSIZE, tft.width(), tft.height()-BOXSIZE, BLACK);
+    }
+    // scale from 0->1023 to tft.width
+    p.x = map(p.x, TS_MINX, TS_MAXX, tft.width(), 0);
+    p.y = map(p.y, TS_MINY, TS_MAXY, tft.height(), 0);
+    /*
+    Serial.print("("); Serial.print(p.x);
+    Serial.print(", "); Serial.print(p.y);
+    Serial.println(")");
+    */
+    if (p.y < BOXSIZE) {
+       oldcolor = currentcolor;
+
+       if (p.x < BOXSIZE) { 
+         currentcolor = RED; 
+         tft.drawRect(0, 0, BOXSIZE, BOXSIZE, WHITE);
+       } else if (p.x < BOXSIZE*2) {
+         currentcolor = YELLOW;
+         tft.drawRect(BOXSIZE, 0, BOXSIZE, BOXSIZE, WHITE);
+       } else if (p.x < BOXSIZE*3) {
+         currentcolor = GREEN;
+         tft.drawRect(BOXSIZE*2, 0, BOXSIZE, BOXSIZE, WHITE);
+       } else if (p.x < BOXSIZE*4) {
+         currentcolor = CYAN;
+         tft.drawRect(BOXSIZE*3, 0, BOXSIZE, BOXSIZE, WHITE);
+       } else if (p.x < BOXSIZE*5) {
+         currentcolor = BLUE;
+         tft.drawRect(BOXSIZE*4, 0, BOXSIZE, BOXSIZE, WHITE);
+       } else if (p.x < BOXSIZE*6) {
+         currentcolor = MAGENTA;
+         tft.drawRect(BOXSIZE*5, 0, BOXSIZE, BOXSIZE, WHITE);
+       }
+
+       if (oldcolor != currentcolor) {
+          if (oldcolor == RED) tft.fillRect(0, 0, BOXSIZE, BOXSIZE, RED);
+          if (oldcolor == YELLOW) tft.fillRect(BOXSIZE, 0, BOXSIZE, BOXSIZE, YELLOW);
+          if (oldcolor == GREEN) tft.fillRect(BOXSIZE*2, 0, BOXSIZE, BOXSIZE, GREEN);
+          if (oldcolor == CYAN) tft.fillRect(BOXSIZE*3, 0, BOXSIZE, BOXSIZE, CYAN);
+          if (oldcolor == BLUE) tft.fillRect(BOXSIZE*4, 0, BOXSIZE, BOXSIZE, BLUE);
+          if (oldcolor == MAGENTA) tft.fillRect(BOXSIZE*5, 0, BOXSIZE, BOXSIZE, MAGENTA);
+       }
+    }
+    if (((p.y-PENRADIUS) > BOXSIZE) && ((p.y+PENRADIUS) < tft.height())) {
+      tft.fillCircle(p.x, p.y, PENRADIUS, currentcolor);
+    }
+  }
+}
+
@@ -0,0 +1,10 @@
+name=Adafruit TFTLCD Library
+version=1.0.1
+author=Adafruit
+maintainer=Adafruit <info@adafruit.com>
+sentence=Adafruit 2.8" TFT display Library
+paragraph=Adafruit 2.8" TFT display Library
+category=Display
+url=https://github.com/adafruit/TFTLCD-Library
+architectures=*
+depends=Adafruit GFX Library
@@ -0,0 +1,553 @@
+#ifndef _pin_magic_
+#define _pin_magic_
+
+// This header file serves two purposes:
+//
+// 1) Isolate non-portable MCU port- and pin-specific identifiers and
+//    operations so the library code itself remains somewhat agnostic
+//    (PORTs and pin numbers are always referenced through macros).
+//
+// 2) GCC doesn't always respect the "inline" keyword, so this is a
+//    ham-fisted manner of forcing the issue to minimize function calls.
+//    This sometimes makes the library a bit bigger than before, but fast++.
+//    However, because they're macros, we need to be SUPER CAREFUL about
+//    parameters -- for example, write8(x) may expand to multiple PORT
+//    writes that all refer to x, so it needs to be a constant or fixed
+//    variable and not something like *ptr++ (which, after macro
+//    expansion, may increment the pointer repeatedly and run off into
+//    la-la land).  Macros also give us fine-grained control over which
+//    operations are inlined on which boards (balancing speed against
+//    available program space).
+
+// When using the TFT shield, control and data pins exist in set physical
+// locations, but the ports and bitmasks corresponding to each vary among
+// boards.  A separate set of pin definitions is given for each supported
+// board type.
+// When using the TFT breakout board, control pins are configurable but
+// the data pins are still fixed -- making every data pin configurable
+// would be much too slow.  The data pin layouts are not the same between
+// the shield and breakout configurations -- for the latter, pins were
+// chosen to keep the tutorial wiring manageable more than making optimal
+// use of ports and bitmasks.  So there's a second set of pin definitions
+// given for each supported board.
+
+// Shield pin usage:
+// LCD Data Bit :    7    6    5    4    3    2    1    0
+// Digital pin #:    7    6   13    4   11   10    9    8
+// Uno port/pin :  PD7  PD6  PB5  PD4  PB3  PB2  PB1  PB0
+// Mega port/pin:  PH4  PH3  PB7  PG5  PB5  PB4  PH6  PH5
+// Leo port/pin :  PE6  PD7  PC7  PD4  PB7  PB6  PB5  PB4
+// Due port/pin : PC23 PC24 PB27 PC26  PD7 PC29 PC21 PC22
+// Breakout pin usage:
+// LCD Data Bit :   7   6   5   4   3   2   1   0
+// Uno dig. pin :   7   6   5   4   3   2   9   8
+// Uno port/pin : PD7 PD6 PD5 PD4 PD3 PD2 PB1 PB0
+// Mega dig. pin:  29  28  27  26  25  24  23  22
+// Mega port/pin: PA7 PA6 PA5 PA4 PA3 PA2 PA1 PA0 (one contiguous PORT)
+// Leo dig. pin :   7   6   5   4   3   2   9   8
+// Leo port/pin : PE6 PD7 PC6 PD4 PD0 PD1 PB5 PB4
+// Due dig. pin :  40  39  38  37  36  35  34  33
+// Due port/pin : PC8 PC7 PC6 PC5 PC4 PC3 PC2 PC1 (one contiguous PORT. -ish…)
+
+// Pixel read operations require a minimum 400 nS delay from RD_ACTIVE
+// to polling the input pins.  At 16 MHz, one machine cycle is 62.5 nS.
+// This code burns 7 cycles (437.5 nS) doing nothing; the RJMPs are
+// equivalent to two NOPs each, final NOP burns the 7th cycle, and the
+// last line is a radioactive mutant emoticon.
+#define DELAY7                                                                 \
+  asm volatile("rjmp .+0"                                                      \
+               "\n\t"                                                          \
+               "rjmp .+0"                                                      \
+               "\n\t"                                                          \
+               "rjmp .+0"                                                      \
+               "\n\t"                                                          \
+               "nop"                                                           \
+               "\n" ::);
+
+#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) ||               \
+    defined(__AVR_ATmega328__) || defined(__AVR_ATmega8__)
+
+// Arduino Uno, Duemilanove, etc.
+
+#ifdef USE_ADAFRUIT_SHIELD_PINOUT
+
+// LCD control lines:
+// RD (read), WR (write), CD (command/data), CS (chip select)
+#define RD_PORT PORTC /*pin A0 */
+#define WR_PORT PORTC /*pin A1 */
+#define CD_PORT PORTC /*pin A2 */
+#define CS_PORT PORTC /*pin A3 */
+#define RD_MASK B00000001
+#define WR_MASK B00000010
+#define CD_MASK B00000100
+#define CS_MASK B00001000
+
+// These are macros for I/O operations...
+
+// Write 8-bit value to LCD data lines
+#define write8inline(d)                                                        \
+  {                                                                            \
+    PORTD = (PORTD & B00101111) | ((d)&B11010000);                             \
+    PORTB = (PORTB & B11010000) | ((d)&B00101111);                             \
+    WR_STROBE;                                                                 \
+  } // STROBEs are defined later
+
+// Read 8-bit value from LCD data lines.  The signle argument
+// is a destination variable; this isn't a function and doesn't
+// return a value in the conventional sense.
+#define read8inline(result)                                                    \
+  {                                                                            \
+    RD_ACTIVE;                                                                 \
+    DELAY7;                                                                    \
+    result = (PIND & B11010000) | (PINB & B00101111);                          \
+    RD_IDLE;                                                                   \
+  }
+
+// These set the PORT directions as required before the write and read
+// operations.  Because write operations are much more common than reads,
+// the data-reading functions in the library code set the PORT(s) to
+// input before a read, and restore them back to the write state before
+// returning.  This avoids having to set it for output inside every
+// drawing method.  The default state has them initialized for writes.
+#define setWriteDirInline()                                                    \
+  {                                                                            \
+    DDRD |= B11010000;                                                         \
+    DDRB |= B00101111;                                                         \
+  }
+#define setReadDirInline()                                                     \
+  {                                                                            \
+    DDRD &= ~B11010000;                                                        \
+    DDRB &= ~B00101111;                                                        \
+  }
+
+#else // Uno w/Breakout board
+
+#define write8inline(d)                                                        \
+  {                                                                            \
+    PORTD = (PORTD & B00000011) | ((d)&B11111100);                             \
+    PORTB = (PORTB & B11111100) | ((d)&B00000011);                             \
+    WR_STROBE;                                                                 \
+  }
+#define read8inline(result)                                                    \
+  {                                                                            \
+    RD_ACTIVE;                                                                 \
+    DELAY7;                                                                    \
+    result = (PIND & B11111100) | (PINB & B00000011);                          \
+    RD_IDLE;                                                                   \
+  }
+#define setWriteDirInline()                                                    \
+  {                                                                            \
+    DDRD |= B11111100;                                                         \
+    DDRB |= B00000011;                                                         \
+  }
+#define setReadDirInline()                                                     \
+  {                                                                            \
+    DDRD &= ~B11111100;                                                        \
+    DDRB &= ~B00000011;                                                        \
+  }
+
+#endif
+
+// As part of the inline control, macros reference other macros...if any
+// of these are left undefined, an equivalent function version (non-inline)
+// is declared later.  The Uno has a moderate amount of program space, so
+// only write8() is inlined -- that one provides the most performance
+// benefit, but unfortunately also generates the most bloat.  This is
+// why only certain cases are inlined for each board.
+#define write8 write8inline
+
+#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) ||            \
+    defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
+
+// Arduino Mega, ADK, etc.
+
+#ifdef USE_ADAFRUIT_SHIELD_PINOUT
+
+#define RD_PORT PORTF
+#define WR_PORT PORTF
+#define CD_PORT PORTF
+#define CS_PORT PORTF
+#define RD_MASK B00000001
+#define WR_MASK B00000010
+#define CD_MASK B00000100
+#define CS_MASK B00001000
+
+#define write8inline(d)                                                        \
+  {                                                                            \
+    PORTH =                                                                    \
+        (PORTH & B10000111) | (((d)&B11000000) >> 3) | (((d)&B00000011) << 5); \
+    PORTB = (PORTB & B01001111) | (((d)&B00101100) << 2);                      \
+    PORTG = (PORTG & B11011111) | (((d)&B00010000) << 1);                      \
+    WR_STROBE;                                                                 \
+  }
+#define read8inline(result)                                                    \
+  {                                                                            \
+    RD_ACTIVE;                                                                 \
+    DELAY7;                                                                    \
+    result = ((PINH & B00011000) << 3) | ((PINB & B10110000) >> 2) |           \
+             ((PING & B00100000) >> 1) | ((PINH & B01100000) >> 5);            \
+    RD_IDLE;                                                                   \
+  }
+#define setWriteDirInline()                                                    \
+  {                                                                            \
+    DDRH |= B01111000;                                                         \
+    DDRB |= B10110000;                                                         \
+    DDRG |= B00100000;                                                         \
+  }
+#define setReadDirInline()                                                     \
+  {                                                                            \
+    DDRH &= ~B01111000;                                                        \
+    DDRB &= ~B10110000;                                                        \
+    DDRG &= ~B00100000;                                                        \
+  }
+
+#else // Mega w/Breakout board
+
+#define write8inline(d)                                                        \
+  {                                                                            \
+    PORTA = (d);                                                               \
+    WR_STROBE;                                                                 \
+  }
+#define read8inline(result)                                                    \
+  {                                                                            \
+    RD_ACTIVE;                                                                 \
+    DELAY7;                                                                    \
+    result = PINA;                                                             \
+    RD_IDLE;                                                                   \
+  }
+#define setWriteDirInline() DDRA = 0xff
+#define setReadDirInline() DDRA = 0
+
+#endif
+
+// All of the functions are inlined on the Arduino Mega.  When using the
+// breakout board, the macro versions aren't appreciably larger than the
+// function equivalents, and they're super simple and fast.  When using
+// the shield, the macros become pretty complicated...but this board has
+// so much code space, the macros are used anyway.  If you need to free
+// up program space, some macros can be removed, at a minor cost in speed.
+#define write8 write8inline
+#define read8 read8inline
+#define setWriteDir setWriteDirInline
+#define setReadDir setReadDirInline
+#define writeRegister8 writeRegister8inline
+#define writeRegister16 writeRegister16inline
+#define writeRegisterPair writeRegisterPairInline
+
+#elif defined(__AVR_ATmega32U4__)
+
+// Arduino Leonardo
+
+#ifdef USE_ADAFRUIT_SHIELD_PINOUT
+
+#define RD_PORT PORTF
+#define WR_PORT PORTF
+#define CD_PORT PORTF
+#define CS_PORT PORTF
+#define RD_MASK B10000000
+#define WR_MASK B01000000
+#define CD_MASK B00100000
+#define CS_MASK B00010000
+
+#define write8inline(d)                                                        \
+  {                                                                            \
+    PORTE = (PORTE & B10111111) | (((d)&B10000000) >> 1);                      \
+    PORTD = (PORTD & B01101111) | (((d)&B01000000) << 1) | ((d)&B00010000);    \
+    PORTC = (PORTC & B01111111) | (((d)&B00100000) << 2);                      \
+    PORTB = (PORTB & B00001111) | (((d)&B00001111) << 4);                      \
+    WR_STROBE;                                                                 \
+  }
+#define read8inline(result)                                                    \
+  {                                                                            \
+    RD_ACTIVE;                                                                 \
+    DELAY7;                                                                    \
+    result = ((PINE & B01000000) << 1) | ((PIND & B10000000) >> 1) |           \
+             ((PINC & B10000000) >> 2) | ((PINB & B11110000) >> 4) |           \
+             (PIND & B00010000);                                               \
+    RD_IDLE;                                                                   \
+  }
+#define setWriteDirInline()                                                    \
+  {                                                                            \
+    DDRE |= B01000000;                                                         \
+    DDRD |= B10010000;                                                         \
+    DDRC |= B10000000;                                                         \
+    DDRB |= B11110000;                                                         \
+  }
+#define setReadDirInline()                                                     \
+  {                                                                            \
+    DDRE &= ~B01000000;                                                        \
+    DDRD &= ~B10010000;                                                        \
+    DDRC &= ~B10000000;                                                        \
+    DDRB &= ~B11110000;                                                        \
+  }
+
+#else // Leonardo w/Breakout board
+
+#define write8inline(d)                                                        \
+  {                                                                            \
+    uint8_t dr1 = (d) >> 1, dl1 = (d) << 1;                                    \
+    PORTE = (PORTE & B10111111) | (dr1 & B01000000);                           \
+    PORTD = (PORTD & B01101100) | (dl1 & B10000000) | (((d)&B00001000) >> 3) | \
+            (dr1 & B00000010) | ((d)&B00010000);                               \
+    PORTC = (PORTC & B10111111) | (dl1 & B01000000);                           \
+    PORTB = (PORTB & B11001111) | (((d)&B00000011) << 4);                      \
+    WR_STROBE;                                                                 \
+  }
+#define read8inline(result)                                                    \
+  {                                                                            \
+    RD_ACTIVE;                                                                 \
+    DELAY7;                                                                    \
+    result = (((PINE & B01000000) | (PIND & B00000010)) << 1) |                \
+             (((PINC & B01000000) | (PIND & B10000000)) >> 1) |                \
+             ((PIND & B00000001) << 3) | ((PINB & B00110000) >> 4) |           \
+             (PIND & B00010000);                                               \
+    RD_IDLE;                                                                   \
+  }
+#define setWriteDirInline()                                                    \
+  {                                                                            \
+    DDRE |= B01000000;                                                         \
+    DDRD |= B10010011;                                                         \
+    DDRC |= B01000000;                                                         \
+    DDRB |= B00110000;                                                         \
+  }
+#define setReadDirInline()                                                     \
+  {                                                                            \
+    DDRE &= ~B01000000;                                                        \
+    DDRD &= ~B10010011;                                                        \
+    DDRC &= ~B01000000;                                                        \
+    DDRB &= ~B00110000;                                                        \
+  }
+
+#endif
+
+// On the Leonardo, only the write8() macro is used -- though even that
+// might be excessive given the code size and available program space
+// on this board.  You may need to disable this to get any sizable
+// program to compile.
+#define write8 write8inline
+
+#elif defined(__SAM3X8E__)
+
+// Arduino Due
+
+#ifdef USE_ADAFRUIT_SHIELD_PINOUT
+
+#define RD_PORT PIOA /*pin A0 */
+#define WR_PORT PIOA /*pin A1 */
+#define CD_PORT PIOA /*pin A2 */
+#define CS_PORT PIOA /*pin A3 */
+#define RD_MASK 0x00010000
+#define WR_MASK 0x01000000
+#define CD_MASK 0x00800000
+#define CS_MASK 0x00400000
+
+#define write8inline(d)                                                        \
+  {                                                                            \
+    PIO_Set(PIOD, (((d)&0x08) << (7 - 3)));                                    \
+    PIO_Clear(PIOD, (((~d) & 0x08) << (7 - 3)));                               \
+    PIO_Set(PIOC, (((d)&0x01) << (22 - 0)) | (((d)&0x02) << (21 - 1)) |        \
+                      (((d)&0x04) << (29 - 2)) | (((d)&0x10) << (26 - 4)) |    \
+                      (((d)&0x40) << (24 - 6)) | (((d)&0x80) << (23 - 7)));    \
+    PIO_Clear(PIOC,                                                            \
+              (((~d) & 0x01) << (22 - 0)) | (((~d) & 0x02) << (21 - 1)) |      \
+                  (((~d) & 0x04) << (29 - 2)) | (((~d) & 0x10) << (26 - 4)) |  \
+                  (((~d) & 0x40) << (24 - 6)) | (((~d) & 0x80) << (23 - 7)));  \
+    PIO_Set(PIOB, (((d)&0x20) << (27 - 5)));                                   \
+    PIO_Clear(PIOB, (((~d) & 0x20) << (27 - 5)));                              \
+    WR_STROBE;                                                                 \
+  }
+
+#define read8inline(result)                                                    \
+  {                                                                            \
+    \    
+   RD_ACTIVE;                                                                  \
+    delayMicroseconds(1);                                                      \
+    result = (((PIOC->PIO_PDSR & (1 << 23)) >> (23 - 7)) |                     \
+              ((PIOC->PIO_PDSR & (1 << 24)) >> (24 - 6)) |                     \
+              ((PIOB->PIO_PDSR & (1 << 27)) >> (27 - 5)) |                     \
+              ((PIOC->PIO_PDSR & (1 << 26)) >> (26 - 4)) |                     \
+              ((PIOD->PIO_PDSR & (1 << 7)) >> (7 - 3)) |                       \
+              ((PIOC->PIO_PDSR & (1 << 29)) >> (29 - 2)) |                     \
+              ((PIOC->PIO_PDSR & (1 << 21)) >> (21 - 1)) |                     \
+              ((PIOC->PIO_PDSR & (1 << 22)) >> (22 - 0)));                     \
+    RD_IDLE;                                                                   \
+  }
+
+#define setWriteDirInline()                                                    \
+  {                                                                            \
+    PIOD->PIO_MDDR |= 0x00000080; /*PIOD->PIO_SODR =  0x00000080;*/            \
+    PIOD->PIO_OER |= 0x00000080;                                               \
+    PIOD->PIO_PER |= 0x00000080;                                               \
+    PIOC->PIO_MDDR |= 0x25E00000; /*PIOC->PIO_SODR =  0x25E00000;*/            \
+    PIOC->PIO_OER |= 0x25E00000;                                               \
+    PIOC->PIO_PER |= 0x25E00000;                                               \
+    PIOB->PIO_MDDR |= 0x08000000; /*PIOB->PIO_SODR =  0x08000000;*/            \
+    PIOB->PIO_OER |= 0x08000000;                                               \
+    PIOB->PIO_PER |= 0x08000000;                                               \
+  }
+
+#define setReadDirInline()                                                     \
+  {                                                                            \
+    pmc_enable_periph_clk(ID_PIOD);                                            \
+    pmc_enable_periph_clk(ID_PIOC);                                            \
+    pmc_enable_periph_clk(ID_PIOB);                                            \
+    PIOD->PIO_PUDR |= 0x00000080;                                              \
+    PIOD->PIO_IFDR |= 0x00000080;                                              \
+    PIOD->PIO_ODR |= 0x00000080;                                               \
+    PIOD->PIO_PER |= 0x00000080;                                               \
+    PIOC->PIO_PUDR |= 0x25E00000;                                              \
+    PIOC->PIO_IFDR |= 0x25E00000;                                              \
+    PIOC->PIO_ODR |= 0x25E00000;                                               \
+    PIOC->PIO_PER |= 0x25E00000;                                               \
+    PIOB->PIO_PUDR |= 0x08000000;                                              \
+    PIOB->PIO_IFDR |= 0x08000000;                                              \
+    PIOB->PIO_ODR |= 0x08000000;                                               \
+    PIOB->PIO_PER |= 0x08000000;                                               \
+  }
+
+// Control signals are ACTIVE LOW (idle is HIGH)
+// Command/Data: LOW = command, HIGH = data
+// These are single-instruction operations and always inline
+#define RD_ACTIVE RD_PORT->PIO_CODR |= RD_MASK
+#define RD_IDLE RD_PORT->PIO_SODR |= RD_MASK
+#define WR_ACTIVE WR_PORT->PIO_CODR |= WR_MASK
+#define WR_IDLE WR_PORT->PIO_SODR |= WR_MASK
+#define CD_COMMAND CD_PORT->PIO_CODR |= CD_MASK
+#define CD_DATA CD_PORT->PIO_SODR |= CD_MASK
+#define CS_ACTIVE CS_PORT->PIO_CODR |= CS_MASK
+#define CS_IDLE CS_PORT->PIO_SODR |= CS_MASK
+
+#else // Due w/Breakout board
+
+#define write8inline(d)                                                        \
+  {                                                                            \
+    PIO_Set(PIOC, (((d)&0xFF) << 1));                                          \
+    PIO_Clear(PIOC, (((~d) & 0xFF) << 1));                                     \
+    WR_STROBE;                                                                 \
+  }
+
+#define read8inline(result)                                                    \
+  {                                                                            \
+    RD_ACTIVE;                                                                 \
+    delayMicroseconds(1);                                                      \
+    result = ((PIOC->PIO_PDSR & 0x1FE) >> 1);                                  \
+    RD_IDLE;                                                                   \
+  }
+
+#define setWriteDirInline()                                                    \
+  {                                                                            \
+    PIOC->PIO_MDDR |= 0x000001FE; /*PIOC->PIO_SODR |=  0x000001FE;*/           \
+    PIOC->PIO_OER |= 0x000001FE;                                               \
+    PIOC->PIO_PER |= 0x000001FE;                                               \
+  }
+
+#define setReadDirInline()                                                     \
+  {                                                                            \
+    pmc_enable_periph_clk(ID_PIOC);                                            \
+    PIOC->PIO_PUDR |= 0x000001FE;                                              \
+    PIOC->PIO_IFDR |= 0x000001FE;                                              \
+    PIOC->PIO_ODR |= 0x000001FE;                                               \
+    PIOC->PIO_PER |= 0x000001FE;                                               \
+  }
+
+// When using the TFT breakout board, control pins are configurable.
+#define RD_ACTIVE rdPort->PIO_CODR |= rdPinSet  // PIO_Clear(rdPort, rdPinSet)
+#define RD_IDLE rdPort->PIO_SODR |= rdPinSet    // PIO_Set(rdPort, rdPinSet)
+#define WR_ACTIVE wrPort->PIO_CODR |= wrPinSet  // PIO_Clear(wrPort, wrPinSet)
+#define WR_IDLE wrPort->PIO_SODR |= wrPinSet    // PIO_Set(wrPort, wrPinSet)
+#define CD_COMMAND cdPort->PIO_CODR |= cdPinSet // PIO_Clear(cdPort, cdPinSet)
+#define CD_DATA cdPort->PIO_SODR |= cdPinSet    // PIO_Set(cdPort, cdPinSet)
+#define CS_ACTIVE csPort->PIO_CODR |= csPinSet  // PIO_Clear(csPort, csPinSet)
+#define CS_IDLE csPort->PIO_SODR |= csPinSet    // PIO_Set(csPort, csPinSet)
+
+#endif
+
+#else
+
+#error "Board type unsupported / not recognized"
+
+#endif
+
+#if !defined(__SAM3X8E__)
+// Stuff common to all Arduino AVR board types:
+
+#ifdef USE_ADAFRUIT_SHIELD_PINOUT
+
+// Control signals are ACTIVE LOW (idle is HIGH)
+// Command/Data: LOW = command, HIGH = data
+// These are single-instruction operations and always inline
+#define RD_ACTIVE RD_PORT &= ~RD_MASK
+#define RD_IDLE RD_PORT |= RD_MASK
+#define WR_ACTIVE WR_PORT &= ~WR_MASK
+#define WR_IDLE WR_PORT |= WR_MASK
+#define CD_COMMAND CD_PORT &= ~CD_MASK
+#define CD_DATA CD_PORT |= CD_MASK
+#define CS_ACTIVE CS_PORT &= ~CS_MASK
+#define CS_IDLE CS_PORT |= CS_MASK
+
+#else // Breakout board
+
+// When using the TFT breakout board, control pins are configurable.
+#define RD_ACTIVE *rdPort &= rdPinUnset
+#define RD_IDLE *rdPort |= rdPinSet
+#define WR_ACTIVE *wrPort &= wrPinUnset
+#define WR_IDLE *wrPort |= wrPinSet
+#define CD_COMMAND *cdPort &= cdPinUnset
+#define CD_DATA *cdPort |= cdPinSet
+#define CS_ACTIVE *csPort &= csPinUnset
+#define CS_IDLE *csPort |= csPinSet
+
+#endif
+#endif
+
+// Data write strobe, ~2 instructions and always inline
+#define WR_STROBE                                                              \
+  {                                                                            \
+    WR_ACTIVE;                                                                 \
+    WR_IDLE;                                                                   \
+  }
+
+// These higher-level operations are usually functionalized,
+// except on Mega where's there's gobs and gobs of program space.
+
+// Set value of TFT register: 8-bit address, 8-bit value
+#define writeRegister8inline(a, d)                                             \
+  {                                                                            \
+    CD_COMMAND;                                                                \
+    write8(a);                                                                 \
+    CD_DATA;                                                                   \
+    write8(d);                                                                 \
+  }
+
+// Set value of TFT register: 16-bit address, 16-bit value
+// See notes at top about macro expansion, hence hi & lo temp vars
+#define writeRegister16inline(a, d)                                            \
+  {                                                                            \
+    uint8_t hi, lo;                                                            \
+    hi = (a) >> 8;                                                             \
+    lo = (a);                                                                  \
+    CD_COMMAND;                                                                \
+    write8(hi);                                                                \
+    write8(lo);                                                                \
+    hi = (d) >> 8;                                                             \
+    lo = (d);                                                                  \
+    CD_DATA;                                                                   \
+    write8(hi);                                                                \
+    write8(lo);                                                                \
+  }
+
+// Set value of 2 TFT registers: Two 8-bit addresses (hi & lo), 16-bit value
+#define writeRegisterPairInline(aH, aL, d)                                     \
+  {                                                                            \
+    uint8_t hi = (d) >> 8, lo = (d);                                           \
+    CD_COMMAND;                                                                \
+    write8(aH);                                                                \
+    CD_DATA;                                                                   \
+    write8(hi);                                                                \
+    CD_COMMAND;                                                                \
+    write8(aL);                                                                \
+    CD_DATA;                                                                   \
+    write8(lo);                                                                \
+  }
+
+#endif // _pin_magic_
@@ -0,0 +1,167 @@
+// Register names from Peter Barrett's Microtouch code
+#define ILI932X_START_OSC 0x00
+#define ILI932X_DRIV_OUT_CTRL 0x01
+#define ILI932X_DRIV_WAV_CTRL 0x02
+#define ILI932X_ENTRY_MOD 0x03
+#define ILI932X_RESIZE_CTRL 0x04
+#define ILI932X_DISP_CTRL1 0x07
+#define ILI932X_DISP_CTRL2 0x08
+#define ILI932X_DISP_CTRL3 0x09
+#define ILI932X_DISP_CTRL4 0x0A
+#define ILI932X_RGB_DISP_IF_CTRL1 0x0C
+#define ILI932X_FRM_MARKER_POS 0x0D
+#define ILI932X_RGB_DISP_IF_CTRL2 0x0F
+#define ILI932X_POW_CTRL1 0x10
+#define ILI932X_POW_CTRL2 0x11
+#define ILI932X_POW_CTRL3 0x12
+#define ILI932X_POW_CTRL4 0x13
+#define ILI932X_GRAM_HOR_AD 0x20
+#define ILI932X_GRAM_VER_AD 0x21
+#define ILI932X_RW_GRAM 0x22
+#define ILI932X_POW_CTRL7 0x29
+#define ILI932X_FRM_RATE_COL_CTRL 0x2B
+#define ILI932X_GAMMA_CTRL1 0x30
+#define ILI932X_GAMMA_CTRL2 0x31
+#define ILI932X_GAMMA_CTRL3 0x32
+#define ILI932X_GAMMA_CTRL4 0x35
+#define ILI932X_GAMMA_CTRL5 0x36
+#define ILI932X_GAMMA_CTRL6 0x37
+#define ILI932X_GAMMA_CTRL7 0x38
+#define ILI932X_GAMMA_CTRL8 0x39
+#define ILI932X_GAMMA_CTRL9 0x3C
+#define ILI932X_GAMMA_CTRL10 0x3D
+#define ILI932X_HOR_START_AD 0x50
+#define ILI932X_HOR_END_AD 0x51
+#define ILI932X_VER_START_AD 0x52
+#define ILI932X_VER_END_AD 0x53
+#define ILI932X_GATE_SCAN_CTRL1 0x60
+#define ILI932X_GATE_SCAN_CTRL2 0x61
+#define ILI932X_GATE_SCAN_CTRL3 0x6A
+#define ILI932X_PART_IMG1_DISP_POS 0x80
+#define ILI932X_PART_IMG1_START_AD 0x81
+#define ILI932X_PART_IMG1_END_AD 0x82
+#define ILI932X_PART_IMG2_DISP_POS 0x83
+#define ILI932X_PART_IMG2_START_AD 0x84
+#define ILI932X_PART_IMG2_END_AD 0x85
+#define ILI932X_PANEL_IF_CTRL1 0x90
+#define ILI932X_PANEL_IF_CTRL2 0x92
+#define ILI932X_PANEL_IF_CTRL3 0x93
+#define ILI932X_PANEL_IF_CTRL4 0x95
+#define ILI932X_PANEL_IF_CTRL5 0x97
+#define ILI932X_PANEL_IF_CTRL6 0x98
+
+#define HX8347G_COLADDRSTART_HI 0x02
+#define HX8347G_COLADDRSTART_LO 0x03
+#define HX8347G_COLADDREND_HI 0x04
+#define HX8347G_COLADDREND_LO 0x05
+#define HX8347G_ROWADDRSTART_HI 0x06
+#define HX8347G_ROWADDRSTART_LO 0x07
+#define HX8347G_ROWADDREND_HI 0x08
+#define HX8347G_ROWADDREND_LO 0x09
+#define HX8347G_MEMACCESS 0x16
+
+#define ILI9341_SOFTRESET 0x01
+#define ILI9341_SLEEPIN 0x10
+#define ILI9341_SLEEPOUT 0x11
+#define ILI9341_NORMALDISP 0x13
+#define ILI9341_INVERTOFF 0x20
+#define ILI9341_INVERTON 0x21
+#define ILI9341_GAMMASET 0x26
+#define ILI9341_DISPLAYOFF 0x28
+#define ILI9341_DISPLAYON 0x29
+#define ILI9341_COLADDRSET 0x2A
+#define ILI9341_PAGEADDRSET 0x2B
+#define ILI9341_MEMORYWRITE 0x2C
+#define ILI9341_PIXELFORMAT 0x3A
+#define ILI9341_FRAMECONTROL 0xB1
+#define ILI9341_DISPLAYFUNC 0xB6
+#define ILI9341_ENTRYMODE 0xB7
+#define ILI9341_POWERCONTROL1 0xC0
+#define ILI9341_POWERCONTROL2 0xC1
+#define ILI9341_VCOMCONTROL1 0xC5
+#define ILI9341_VCOMCONTROL2 0xC7
+#define ILI9341_MEMCONTROL 0x36
+#define ILI9341_MADCTL 0x36
+
+#define ILI9341_MADCTL_MY 0x80
+#define ILI9341_MADCTL_MX 0x40
+#define ILI9341_MADCTL_MV 0x20
+#define ILI9341_MADCTL_ML 0x10
+#define ILI9341_MADCTL_RGB 0x00
+#define ILI9341_MADCTL_BGR 0x08
+#define ILI9341_MADCTL_MH 0x04
+
+#define HX8357_NOP 0x00
+#define HX8357_SWRESET 0x01
+#define HX8357_RDDID 0x04
+#define HX8357_RDDST 0x09
+
+#define HX8357B_RDPOWMODE 0x0A
+#define HX8357B_RDMADCTL 0x0B
+#define HX8357B_RDCOLMOD 0x0C
+#define HX8357B_RDDIM 0x0D
+#define HX8357B_RDDSDR 0x0F
+
+#define HX8357_SLPIN 0x10
+#define HX8357_SLPOUT 0x11
+#define HX8357B_PTLON 0x12
+#define HX8357B_NORON 0x13
+
+#define HX8357_INVOFF 0x20
+#define HX8357_INVON 0x21
+#define HX8357_DISPOFF 0x28
+#define HX8357_DISPON 0x29
+
+#define HX8357_CASET 0x2A
+#define HX8357_PASET 0x2B
+#define HX8357_RAMWR 0x2C
+#define HX8357_RAMRD 0x2E
+
+#define HX8357B_PTLAR 0x30
+#define HX8357_TEON 0x35
+#define HX8357_TEARLINE 0x44
+#define HX8357_MADCTL 0x36
+#define HX8357_COLMOD 0x3A
+
+#define HX8357_SETOSC 0xB0
+#define HX8357_SETPWR1 0xB1
+#define HX8357B_SETDISPLAY 0xB2
+#define HX8357_SETRGB 0xB3
+#define HX8357D_SETCOM 0xB6
+
+#define HX8357B_SETDISPMODE 0xB4
+#define HX8357D_SETCYC 0xB4
+#define HX8357B_SETOTP 0xB7
+#define HX8357D_SETC 0xB9
+
+#define HX8357B_SET_PANEL_DRIVING 0xC0
+#define HX8357D_SETSTBA 0xC0
+#define HX8357B_SETDGC 0xC1
+#define HX8357B_SETID 0xC3
+#define HX8357B_SETDDB 0xC4
+#define HX8357B_SETDISPLAYFRAME 0xC5
+#define HX8357B_GAMMASET 0xC8
+#define HX8357B_SETCABC 0xC9
+#define HX8357_SETPANEL 0xCC
+
+#define HX8357B_SETPOWER 0xD0
+#define HX8357B_SETVCOM 0xD1
+#define HX8357B_SETPWRNORMAL 0xD2
+
+#define HX8357B_RDID1 0xDA
+#define HX8357B_RDID2 0xDB
+#define HX8357B_RDID3 0xDC
+#define HX8357B_RDID4 0xDD
+
+#define HX8357D_SETGAMMA 0xE0
+
+#define HX8357B_SETGAMMA 0xC8
+#define HX8357B_SETPANELRELATED 0xE9
+
+#define HX8357B_MADCTL_MY 0x80
+#define HX8357B_MADCTL_MX 0x40
+#define HX8357B_MADCTL_MV 0x20
+#define HX8357B_MADCTL_ML 0x10
+#define HX8357B_MADCTL_RGB 0x00
+#define HX8357B_MADCTL_BGR 0x08
+#define HX8357B_MADCTL_MH 0x04
Author	SHA1	Message	Date
siddacious	f93482daf4	Update library.properties	2020-01-16 11:36:14 -08:00
ladyada	5b2bead71b	clang	2020-01-13 19:17:10 -05:00
Limor "Ladyada" Fried	94d08c244f	Merge pull request #39 from dherrada/patch-1 Changed name in library.properties	2019-11-16 22:49:03 -05:00
dherrada	dfded750b1	Changed name	2019-11-16 22:42:48 -05:00
Limor "Ladyada" Fried	4ff23d2e7b	Merge pull request #38 from hoffmannjan/master travis + library.properties + image + readme	2019-08-10 16:20:30 -04:00
Jan Hoffmann	838ed8df3b	Update README.md	2019-08-08 18:09:10 +02:00
Jan Hoffmann	7462aa6034	travis disabled	2019-08-08 17:55:10 +02:00
Jan Hoffmann	2006f6a454	pde -> ino	2019-08-07 17:00:39 +02:00
Jan Hoffmann	1f6ced8df5	travis fixes	2019-08-07 16:56:44 +02:00
Jan Hoffmann	40db73b341	removed readme.txt	2019-08-07 16:32:39 +02:00
Jan Hoffmann	96d067bdc7	added image	2019-08-07 16:30:51 +02:00
Jan Hoffmann	4b120b2fc4	added readme	2019-08-07 16:30:17 +02:00
Jan Hoffmann	99aba1fb73	added travis and library properties	2019-08-07 16:26:38 +02:00
ladyada	8ad1ede59f	change init to retry ILI9341 checks a few times	2018-02-22 17:03:41 -05:00
Tony DiCola	d73bbf1866	Add GitHub issue template	2016-05-27 13:43:05 -07:00
Tony DiCola	9535fbf889	Add GitHub pull request template	2016-05-27 13:37:54 -07:00
driverblock	97a82854c8	Fixed 3.5" TFT text rotation issue Fixed MADCTL values for HX8357B	2014-11-13 10:38:59 -05:00
driverblock	ecf4cf17b0	add HX8357 driver check	2014-10-31 13:40:29 -04:00
driverblock	6c236e25fa	Add HX8357 driver check	2014-10-31 13:39:28 -04:00
ladyada	40266af7ab	add HX8357 check	2014-08-15 17:52:54 -04:00
ladyada	6c41da9750	fixes	2014-08-13 18:15:49 -04:00
ladyada	9323b5cdb5	Merge branch 'master' of github.com:adafruit/TFTLCD-Library Conflicts: Adafruit_TFTLCD.cpp	2014-08-13 17:43:31 -04:00
ladyada	87479c7442	Add HX8357D 3.5" tft support	2014-08-13 17:42:46 -04:00
Tony DiCola	7a983dcbc5	Fix #11 by adding SPI.h to tftbmp example.	2014-07-25 18:40:41 -07:00
Tony DiCola	7d70af32ff	Update tftbmp example note to mention Arduino mega hardware SPI.	2014-07-22 22:35:12 -07:00
Tony DiCola	d9b13dbda0	Fix #12 by sending rotated with/height limits to setAddrWindow instead of hardcoded values.	2014-07-22 16:57:31 -07:00
ladyada	318bb8356e	fix for pushcolor	2014-04-30 12:56:09 -04:00
ladyada	162103b583	Merge branch 'master' of github.com:adafruit/TFTLCD-Library	2014-04-30 12:54:08 -04:00
ladyada	879c387a08	added ILI9341 check to tftbmp!	2014-04-30 12:53:37 -04:00
driverblock	f775b97d86	Change Point to TSPoint Someone changed the TouchScreen l;ibrary to define TSPoint instead of Point, but didn't update this example sketch	2014-03-24 17:05:10 -04:00
ladyada	286f81f96e	TFTpaint for ili9341 fixed!	2014-03-18 14:35:33 -04:00
ladyada	391f1a503f	rotation for ili9341 fixed and also now default 'upright'	2014-03-18 14:33:29 -04:00
ladyada	7fc3d6fb0a	fix merge for readreg() and also, add ili9341 to graphicstest	2014-03-18 13:59:34 -04:00
ladyada	6bc43d3e67	Merge branch 'master' of github.com:adafruit/TFTLCD-Library Conflicts: Adafruit_TFTLCD.cpp Adafruit_TFTLCD.h	2014-03-17 21:23:22 -04:00
ladyada	b9d06458f5	add ILI9341 support - shield is no longer default (new shield has new library)	2014-03-17 21:20:57 -04:00
driverblock	1cf75baa9b	Restored Restored files mistakenly deleted	2013-09-07 17:47:22 -04:00
driverblock	4ccd1148b0	merge follies	2013-09-07 17:44:31 -04:00
driverblock	c596e1aa7f	Merge branch 'Due'	2013-09-07 17:43:26 -04:00
Phillip Burgess	ffce7315b6	readPixel() working, more robust readID()	2013-07-15 13:51:42 -07:00
Phillip Burgess	2926bacdbc	Fix for recent Adafruit_GFX change and PROGMEM kludges	2013-07-05 11:40:09 -07:00
Phillip Burgess	b229812d29	Fix(?) for readID returning 0	2013-03-17 21:10:48 -07:00
Phillip Burgess	e4b0fa892d	Fixed PROGMEM string-printing issues	2012-11-21 16:51:07 -08:00
Phillip Burgess	f74dd70f2c	Partial Leonardo support, BMP examples working on Mega	2012-09-17 16:58:20 -07:00
Phillip Burgess	4e398c8eef	Restored goTo() function for now	2012-09-03 11:54:10 -07:00
Phillip Burgess	a857c4960f	BMP fixes w/TFT breakout	2012-08-31 18:14:25 -07:00
ladyada	d44a453e17	BMP drawing working with HX chipset	2012-07-04 13:11:27 -04:00
ladyada	2938be3d5a	adjusted examples to check for HX type	2012-07-03 13:41:56 -04:00
ladyada	5cb1161bf8	Fixed HX rotation	2012-07-03 13:22:22 -04:00
ladyada	73f030d62e	read it	2012-04-20 12:20:00 -04:00
ladyada	10e5109e61	added header #ifndef	2012-04-17 15:06:58 -04:00
ladyada	936e71a5f0	little typo for UNO's fixed. should be mega + uno ready now	2012-04-16 12:57:07 -04:00
ladyada	450a1929d9	updated shield Mega hardcoded pins - still working on the touchscreen	2012-04-16 12:50:24 -04:00
Paint Your Dragon	ca4b16ac34	Tweaks for Adafruit_GFX	2012-04-09 20:53:28 -07:00
Paint Your Dragon	ce39dff490	Removed glcdfont.c; now handled by GFX library	2012-04-05 19:57:20 -07:00
ladyada	7167fc5a02	init with id	2012-04-05 22:42:08 -04:00
ladyada	df86262987	typo!	2012-04-05 22:34:20 -04:00
ladyada	f891b23d38	should be all ready to go now	2012-04-05 22:32:35 -04:00
ladyada	33ad503675	now with basic HX8347G support (need to do optimized fillRect)	2012-04-04 22:56:14 -04:00
Ladyada	418ae2f913	last example to fix	2012-04-04 18:06:44 -04:00
Ladyada	7838b6dad8	more updates	2012-04-04 18:05:27 -04:00
Ladyada	949444204d	fixed two more examples for new library name	2012-04-04 17:58:00 -04:00
Ladyada	115fc817ef	refactored to use GFX, & 4 times faster for the fixed shield pinout!	2012-04-04 17:53:38 -04:00
Ladyada	8566cff258	Merge branch 'master' of github.com:adafruit/TFTLCD-Library	2012-03-30 10:38:52 -04:00
Ladyada	41f69a0d66	typo fixes	2012-03-30 10:38:37 -04:00
Paint Your Dragon	164456f6f5	Arduino 1.0 compliant	2011-12-02 23:46:39 -08:00
Ladyada	59e176c21a	argh #ifdef typo. all good now	2011-08-24 14:04:49 -04:00
Ladyada	3bc51273a2	Added Mega support for the TFT shield	2011-08-23 19:32:30 -04:00
Ladyada	934226e5d2	recommented the TFT pinout changer	2011-07-20 18:37:10 -04:00
Ladyada	afe10512ab	fixed circles, added tests to example	2011-07-20 18:06:15 -04:00
Ladyada	18f10bb713	filled round rects, and color pickin' helper	2011-07-20 18:01:35 -04:00
Ladyada	b20c0ea119	added round rectangle drawing	2011-07-20 16:54:52 -04:00
Ladyada	c97a399067	triangles, filled and outlined	2011-07-13 15:47:42 -04:00
Ladyada	3090da8b2f	fixed new width/height calls instead of const	2011-06-10 12:04:32 -04:00
Ladyada	d0854b30db	oops. misnamed!	2011-06-08 17:08:50 -04:00
Ladyada	d723ae0eb9	Sorta adding roundrects	2011-06-08 16:38:28 -04:00
Ladyada	8ed1df7bea	Kinda started on roundrects	2011-06-08 16:38:10 -04:00
Ladyada	23f92b31a1	Load a bitmap example	2011-06-08 16:37:29 -04:00
Ladyada	d06df75d29	Does check for correct shield config!	2011-06-07 17:47:31 -04:00
Ladyada	409ee5e8c4	now with better text and rotation handling!	2011-06-07 17:47:00 -04:00
Ladyada	c792899657	TFT paint with correct touch pads for shield	2011-06-07 17:39:49 -04:00
Ladyada	ae8c502f61	Demo better text handling and rotation in graphics test	2011-06-07 17:26:10 -04:00
Ladyada	f6d0a609e2	Added rotation of all objects, this sketch tests it!	2011-06-07 17:18:47 -04:00
Ladyada	8fb4cda17b	Updated touchscreen & tspaint	2011-03-23 14:31:47 -04:00
Ladyada	9f29d4fc3e	lines now properly drawn, graphicstest updated with full 4 quadrant test	2011-03-23 13:33:53 -04:00
Ladyada	301e179fde	optimized 'away' digitalWrite calls	2011-03-23 13:28:45 -04:00
Ladyada	e068240057	Use masking instead of hardcoded pins	2011-03-23 13:19:22 -04:00
Ladyada	f9a3d8c3f0	fixed line drawing bug with unsigned ints	2011-03-15 17:18:52 -04:00
Ladyada	f56b15bede	Clarified BMP format	2011-03-11 16:32:25 -05:00
Ladyada	d62573ff58	Added BMP drawing sketch and example BMPs	2011-03-11 16:31:29 -05:00
Ladyada	d47f6ec8d0	Added sync code to reset() and a variable for the rotation	2011-03-10 14:04:47 -05:00
Ladyada	6499cc904b	Bitmap images for testing purposes	2011-03-09 16:43:04 -05:00
Ladyada	ff3d3c7d39	Optimized pin twiddling for much faster drawing (50%!) and a goto(x,y) function	2011-03-09 16:42:44 -05:00
Ladyada	706b8f2882	Added Mega support on portA	2011-02-23 11:46:15 -05:00
Ladyada	d81eb3cade	line drawin fix	2011-02-23 11:13:48 -05:00
Ladyada	20c0851274	Added a 5x8 generic font	2011-02-11 18:14:03 -05:00
Ladyada	2eb12095df	added string drawing and test. doesn't inherit the printing library (yet)	2011-02-11 16:52:16 -05:00
Ladyada	6e8edf0202	license header	2011-02-11 15:10:07 -05:00
Ladyada	adbdc7b8db	Two examples - a touchscreen painting program and a graphics test party	2011-02-11 15:09:52 -05:00
Ladyada	68a8afecd3	initial working code	2011-01-13 20:42:43 -05:00