Trying to get CCL working, not there yet

Breakout only (no shield), data pins are hardcoded, works on ItsyBitsy M4.

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,46 @@
+Thank you for opening an issue on an Adafruit Arduino library repository.  To
+improve the speed of resolution please review the following guidelines and
+common troubleshooting steps below before creating the issue:
+
+- **Do not use GitHub issues for troubleshooting projects and issues.**  Instead use
+  the forums at http://forums.adafruit.com to ask questions and troubleshoot why
+  something isn't working as expected.  In many cases the problem is a common issue
+  that you will more quickly receive help from the forum community.  GitHub issues
+  are meant for known defects in the code.  If you don't know if there is a defect
+  in the code then start with troubleshooting on the forum first.
+
+- **If following a tutorial or guide be sure you didn't miss a step.** Carefully
+  check all of the steps and commands to run have been followed.  Consult the
+  forum if you're unsure or have questions about steps in a guide/tutorial.
+
+- **For Arduino projects check these very common issues to ensure they don't apply**:
+
+  - For uploading sketches or communicating with the board make sure you're using
+    a **USB data cable** and **not** a **USB charge-only cable**.  It is sometimes
+    very hard to tell the difference between a data and charge cable!  Try using the
+    cable with other devices or swapping to another cable to confirm it is not
+    the problem.
+
+  - **Be sure you are supplying adequate power to the board.**  Check the specs of
+    your board and plug in an external power supply.  In many cases just
+    plugging a board into your computer is not enough to power it and other
+    peripherals.
+
+  - **Double check all soldering joints and connections.**  Flakey connections
+    cause many mysterious problems.  See the [guide to excellent soldering](https://learn.adafruit.com/adafruit-guide-excellent-soldering/tools) for examples of good solder joints.
+
+  - **Ensure you are using an official Arduino or Adafruit board.** We can't
+    guarantee a clone board will have the same functionality and work as expected
+    with this code and don't support them.
+
+If you're sure this issue is a defect in the code and checked the steps above
+please fill in the following fields to provide enough troubleshooting information.
+You may delete the guideline and text above to just leave the following details:
+
+- Arduino board:  **INSERT ARDUINO BOARD NAME/TYPE HERE**
+
+- Arduino IDE version (found in Arduino -> About Arduino menu):  **INSERT ARDUINO
+  VERSION HERE**
+
+- List the steps to reproduce the problem below (if possible attach a sketch or
+  copy the sketch code in too): **LIST REPRO STEPS BELOW**

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,26 @@
+Thank you for creating a pull request to contribute to Adafruit's GitHub code!
+Before you open the request please review the following guidelines and tips to
+help it be more easily integrated:
+
+- **Describe the scope of your change--i.e. what the change does and what parts
+  of the code were modified.**  This will help us understand any risks of integrating
+  the code.
+
+- **Describe any known limitations with your change.**  For example if the change
+  doesn't apply to a supported platform of the library please mention it.
+
+- **Please run any tests or examples that can exercise your modified code.**  We
+  strive to not break users of the code and running tests/examples helps with this
+  process.
+
+Thank you again for contributing!  We will try to test and integrate the change
+as soon as we can, but be aware we have many GitHub repositories to manage and
+can't immediately respond to every request.  There is no need to bump or check in
+on a pull request (it will clutter the discussion of the request).
+
+Also don't be worried if the request is closed or not integrated--sometimes the
+priorities of Adafruit's GitHub code (education, ease of use) might not match the
+priorities of the pull request.  Don't fret, the open source community thrives on
+forks and GitHub makes it easy to keep your changes in a forked repo.
+
+After reviewing the guidelines above you can delete this text from the pull request.

Adafruit_TFTLCD.h

@@ -16,7 +16,8 @@
 
 // **** IF USING THE LCD BREAKOUT BOARD, COMMENT OUT THIS NEXT LINE. ****
 // **** IF USING THE LCD SHIELD, LEAVE THE LINE ENABLED:             ****
-//#define USE_ADAFRUIT_SHIELD_PINOUT
+
+//#define USE_ADAFRUIT_SHIELD_PINOUT 1
 
 class Adafruit_TFTLCD : public Adafruit_GFX {
 
@@ -25,7 +26,6 @@ class Adafruit_TFTLCD : public Adafruit_GFX {
   Adafruit_TFTLCD(uint8_t cs, uint8_t cd, uint8_t wr, uint8_t rd, uint8_t rst);
   Adafruit_TFTLCD(void);
 
-  void     setup(uint8_t cs, uint8_t cd, uint8_t wr, uint8_t rd, uint8_t rst);
   void     begin(uint16_t id = 0x9325);
   void     drawPixel(int16_t x, int16_t y, uint16_t color);
   void     drawFastHLine(int16_t x0, int16_t y0, int16_t w, uint16_t color);
@@ -38,12 +38,18 @@ class Adafruit_TFTLCD : public Adafruit_GFX {
   void     setRotation(uint8_t x);
        // These methods are public in order for BMP examples to work:
   void     setAddrWindow(int x1, int y1, int x2, int y2);
+#if defined(__SAMD51__)
+  void     pushColors(uint16_t *data, uint16_t len, boolean first);
+#else
   void     pushColors(uint16_t *data, uint8_t len, boolean first);
+#endif
+  void     pushColorsDMA(uint32_t totalBytes, uint8_t *buffer,
+             uint16_t bufSize, void (*callback)(uint8_t *dest, uint16_t len));
+
 
   uint16_t color565(uint8_t r, uint8_t g, uint8_t b),
            readPixel(int16_t x, int16_t y),
            readID(void);
-
   uint32_t readReg(uint8_t r);
 
  private:
@@ -66,9 +72,8 @@ class Adafruit_TFTLCD : public Adafruit_GFX {
 #ifndef writeRegister16
            writeRegister16(uint16_t a, uint16_t d),
 #endif
-#ifndef writeRegister32
-           writeRegister32(uint16_t a, uint32_t d),
-#endif
+    writeRegister24(uint8_t a, uint32_t d),
+    writeRegister32(uint8_t a, uint32_t d),
 #ifndef writeRegisterPair
            writeRegisterPair(uint8_t aH, uint8_t aL, uint16_t d),
 #endif
@@ -83,19 +88,25 @@ class Adafruit_TFTLCD : public Adafruit_GFX {
 
 #ifndef USE_ADAFRUIT_SHIELD_PINOUT
 
-  #ifdef __AVR__
-    volatile uint8_t *csPort    , *cdPort    , *wrPort    , *rdPort;
-	uint8_t           csPinSet  ,  cdPinSet  ,  wrPinSet  ,  rdPinSet  ,
-					  csPinUnset,  cdPinUnset,  wrPinUnset,  rdPinUnset,
-					  _reset;
-  #endif
-  #if defined(__SAM3X8E__)
-    Pio *csPort    , *cdPort    , *wrPort    , *rdPort;
-	uint32_t          csPinSet  ,  cdPinSet  ,  wrPinSet  ,  rdPinSet  ,
-					  csPinUnset,  cdPinUnset,  wrPinUnset,  rdPinUnset,
-					  _reset;
-  #endif
+ #ifdef __AVR__
+  volatile uint8_t  *csPort    , *cdPort    , *wrPort    , *rdPort;
+  uint8_t            csPinSet  ,  cdPinSet  ,  wrPinSet  ,  rdPinSet  ,
+                     csPinUnset,  cdPinUnset,  wrPinUnset,  rdPinUnset,
+                     _reset;
+ #elif defined(__SAM3X8E__)
+  Pio               *csPort    , *cdPort    , *wrPort    , *rdPort;
+  uint32_t           csPinSet  ,  cdPinSet  ,  wrPinSet  ,  rdPinSet  ,
+                     csPinUnset,  cdPinUnset,  wrPinUnset,  rdPinUnset,
+                     _reset;
+ #elif defined(__SAMD51__)
+  volatile uint32_t *csPortSet , *cdPortSet , *wrPortSet , *rdPortSet,
+                    *csPortClr , *cdPortClr , *wrPortClr , *rdPortClr;
+  uint32_t           csPinMask ,  cdPinMask ,  wrPinMask ,  rdPinMask,
+                     _reset;
+  volatile uint8_t  *writePort, *readPort, *dirSet, *dirClr;
 
+ #endif
+  
 #endif
 };
 

examples/graphicstest/graphicstest.pde

@@ -1,32 +1,39 @@
-// IMPORTANT: Adafruit_TFTLCD LIBRARY MUST BE SPECIFICALLY
-// CONFIGURED FOR EITHER THE TFT SHIELD OR THE BREAKOUT BOARD.
-// SEE RELEVANT COMMENTS IN Adafruit_TFTLCD.h FOR SETUP.
+// Graphics test rigged specifically for the SAMD21 branch
+// of TFTLCD and the ItsyBitsy M4 board.  TFTLCD lib MUST be
+// configured for the breakout board option, plus there's
+// some wiring shenanigans...
+
+// LCD_WR MUST go to pin D4, because we're using a specific
+// timer/counter for PWM output.  The pin # could be changed
+// IF a corresponding timer change is made in the SAMD21 TFTLIB.
+
+// One of two additional wiring changes MUST be made.  Either:
+// LCD_WR MUST go through an inverter (e.g. 74HC04)
+//  -or-
+// The TFT 'CS' pin MUST be tied HIGH (ignoring LCD_CS setting)
+// If you opt for this latter arrangement, you CANNOT read the
+// device ID from the display (or anything else) -- see setup()
+// where 'identifier' is hardcoded;
+
+// Data pins are as follows:
+//   D0 connects to digital pin 0  (Notice these are
+//   D1 connects to digital pin 1   NOT in order!)
+//   D2 connects to digital pin 7
+//   D3 connects to digital pin 9
+//   D4 connects to digital pin 10
+//   D5 connects to digital pin 11
+//   D6 connects to digital pin 13
+//   D7 connects to digital pin 12
 
 #include <Adafruit_GFX.h>    // Core graphics library
 #include <Adafruit_TFTLCD.h> // Hardware-specific library
 
-// The control pins for the LCD can be assigned to any digital or
-// analog pins...but we'll use the analog pins as this allows us to
-// double up the pins with the touch screen (see the TFT paint example).
-#define LCD_CS A3 // Chip Select goes to Analog 3
-#define LCD_CD A2 // Command/Data goes to Analog 2
-#define LCD_WR A1 // LCD Write goes to Analog 1
-#define LCD_RD A0 // LCD Read goes to Analog 0
+#define LCD_CS A3 // Chip Select (see notes above)
+#define LCD_CD A2 // Command/Data
+#define LCD_RD A0 // LCD Read strobe
+#define LCD_WR  4 // LCD Write strobe (see notes above)
 
-#define LCD_RESET A4 // Can alternately just connect to Arduino's reset pin
-
-// When using the BREAKOUT BOARD only, use these 8 data lines to the LCD:
-// For the Arduino Uno, Duemilanove, Diecimila, etc.:
-//   D0 connects to digital pin 8  (Notice these are
-//   D1 connects to digital pin 9   NOT in order!)
-//   D2 connects to digital pin 2
-//   D3 connects to digital pin 3
-//   D4 connects to digital pin 4
-//   D5 connects to digital pin 5
-//   D6 connects to digital pin 6
-//   D7 connects to digital pin 7
-// For the Arduino Mega, use digital pins 22 through 29
-// (on the 2-row header at the end of the board).
+#define LCD_RESET A4 // Alternately just connect to Arduino's reset pin
 
 // Assign human-readable names to some common 16-bit color values:
 #define	BLACK   0x0000
@@ -39,30 +46,36 @@
 #define WHITE   0xFFFF
 
 Adafruit_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);
-// If using the shield, all control and data lines are fixed, and
-// a simpler declaration can optionally be used:
-// Adafruit_TFTLCD tft;
 
 void setup(void) {
   Serial.begin(9600);
   Serial.println(F("TFT LCD test"));
-
 #ifdef USE_ADAFRUIT_SHIELD_PINOUT
   Serial.println(F("Using Adafruit 2.8\" TFT Arduino Shield Pinout"));
 #else
   Serial.println(F("Using Adafruit 2.8\" TFT Breakout Board Pinout"));
 #endif
 
+  Serial.print("TFT size is "); Serial.print(tft.width()); Serial.print("x"); Serial.println(tft.height());
+
   tft.reset();
 
   uint16_t identifier = tft.readID();
 
+  // SEE NOTES ABOVE - this is necessary IF using the
+  // hard-wired CS (and no inverter) option.
+  identifier = 0x9341;
+
   if(identifier == 0x9325) {
     Serial.println(F("Found ILI9325 LCD driver"));
   } else if(identifier == 0x9328) {
     Serial.println(F("Found ILI9328 LCD driver"));
   } else if(identifier == 0x7575) {
     Serial.println(F("Found HX8347G LCD driver"));
+  } else if(identifier == 0x9341) {
+    Serial.println(F("Found ILI9341 LCD driver"));
+  } else if(identifier == 0x8357) {
+    Serial.println(F("Found HX8357D LCD driver"));
   } else {
     Serial.print(F("Unknown LCD driver chip: "));
     Serial.println(identifier, HEX);
@@ -72,11 +85,30 @@ void setup(void) {
     Serial.println(F("If using the breakout board, it should NOT be #defined!"));
     Serial.println(F("Also if using the breakout, double-check that all wiring"));
     Serial.println(F("matches the tutorial."));
-    return;
   }
 
   tft.begin(identifier);
 
+#if 0
+// Test frame rate:
+uint32_t startTime = millis();
+uint32_t frames = 0;
+for(;;) {
+  tft.fillScreen(0x0000);
+  frames++;
+//  delay(500);
+  tft.fillScreen(0xFFFF);
+  frames++;
+//  delay(500);
+  if(!(frames & 0xFF)) {
+    uint32_t elapsed = (millis() - startTime) / 1000;
+    if(elapsed > 0) {
+      Serial.println(frames / elapsed);
+    }
+  }
+}
+#endif
+
   Serial.println(F("Benchmark                Time (microseconds)"));
 
   Serial.print(F("Screen fill              "));
@@ -377,4 +409,3 @@ unsigned long testFilledRoundRects() {
 
   return micros() - start;
 }
-

examples/graphicstestx/graphicstestx.pde

@@ -1,351 +0,0 @@
-// This is the same "graphicstest" demo, except modified
-// to work on a XMEGA A3BU Xplained board
-// DO NOT DEFINE "USE_ADAFRUIT_SHIELD_PINOUT" in Adafruit_TFTLCD.h
-// the pin mapping are different, and Serial4 is used for debug messages
-// SEE RELEVANT COMMENTS IN Adafruit_TFTLCD.h FOR SETUP.
-
-#include <Adafruit_GFX.h>    // Core graphics library
-#include <Adafruit_TFTLCD.h> // Hardware-specific library
-
-#define LCD_CS		31	// PA4
-#define LCD_CD		38	// PB3
-#define LCD_WR		37	// PB2
-#define LCD_RD		36	// PB1
-#define LCD_RESET	35	// PA0
-
-// Frank: On the XMEGA256A3BU-Xplained, PORTC is connected to the LCD data bus directly
-
-Adafruit_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);
-
-// Assign human-readable names to some common 16-bit color values:
-#define	BLACK   0x0000
-#define	BLUE    0x001F
-#define	RED     0xF800
-#define	GREEN   0x07E0
-#define CYAN    0x07FF
-#define MAGENTA 0xF81F
-#define YELLOW  0xFFE0
-#define WHITE   0xFFFF
-
-void setup(void) {
-  Serial4.begin(9600);
-  Serial4.println("TFT LCD test");
-
-  tft.reset();
-
-  uint16_t identifier = tft.readID();
-
-  if(identifier == 0x9325) {
-    Serial4.println(F("Found ILI9325 LCD driver"));
-  } else if(identifier == 0x9328) {
-    Serial4.println(F("Found ILI9328 LCD driver"));
-  } else if(identifier == 0x7575) {
-    Serial4.println(F("Found HX8347G LCD driver"));
-  } else {
-    Serial4.print(F("Unknown LCD driver chip: "));
-    Serial4.println(identifier, HEX);    
-    return;
-  }
-
-  tft.begin(identifier);
-
-  Serial4.println(F("Benchmark                Time (microseconds)"));
-
-  Serial4.print(F("Screen fill              "));
-  Serial4.println(testFillScreen());
-  delay(500);
-
-  Serial4.print(F("Text                     "));
-  Serial4.println(testText());
-  delay(3000);
-
-  Serial4.print(F("Lines                    "));
-  Serial4.println(testLines(CYAN));
-  delay(500);
-
-  Serial4.print(F("Horiz/Vert Lines         "));
-  Serial4.println(testFastLines(RED, BLUE));
-  delay(500);
-
-  Serial4.print(F("Rectangles (outline)     "));
-  Serial4.println(testRects(GREEN));
-  delay(500);
-
-  Serial4.print(F("Rectangles (filled)      "));
-  Serial4.println(testFilledRects(YELLOW, MAGENTA));
-  delay(500);
-
-  Serial4.print(F("Circles (filled)         "));
-  Serial4.println(testFilledCircles(10, MAGENTA));
-
-  Serial4.print(F("Circles (outline)        "));
-  Serial4.println(testCircles(10, WHITE));
-  delay(500);
-
-  Serial4.print(F("Triangles (outline)      "));
-  Serial4.println(testTriangles());
-  delay(500);
-
-  Serial4.print(F("Triangles (filled)       "));
-  Serial4.println(testFilledTriangles());
-  delay(500);
-
-  Serial4.print(F("Rounded rects (outline)  "));
-  Serial4.println(testRoundRects());
-  delay(500);
-
-  Serial4.print(F("Rounded rects (filled)   "));
-  Serial4.println(testFilledRoundRects());
-  delay(500);
-
-  Serial4.println(F("Done!"));
-}
-
-void loop(void) {
-  for(uint8_t rotation=0; rotation<4; rotation++) {
-    tft.setRotation(rotation);
-    testText();
-    delay(2000);
-  }
-}
-
-unsigned long testFillScreen() {
-  unsigned long start = micros();
-  tft.fillScreen(BLACK);
-  tft.fillScreen(RED);
-  tft.fillScreen(GREEN);
-  tft.fillScreen(BLUE);
-  tft.fillScreen(BLACK);
-  return micros() - start;
-}
-
-unsigned long testText() {
-  tft.fillScreen(BLACK);
-  unsigned long start = micros();
-  tft.setCursor(0, 0);
-  tft.setTextColor(WHITE);  tft.setTextSize(1);
-  tft.println("Hello World!");
-  tft.setTextColor(YELLOW); tft.setTextSize(2);
-  tft.println(1234.56);
-  tft.setTextColor(RED);    tft.setTextSize(3);
-  tft.println(0xDEADBEEF, HEX);
-  tft.println();
-  tft.setTextColor(GREEN);
-  tft.setTextSize(5);
-  tft.println("Groop");
-  tft.setTextSize(2);
-  tft.println("I implore thee,");
-  tft.setTextSize(1);
-  tft.println("my foonting turlingdromes.");
-  tft.println("And hooptiously drangle me");
-  tft.println("with crinkly bindlewurdles,");
-  tft.println("Or I will rend thee");
-  tft.println("in the gobberwarts");
-  tft.println("with my blurglecruncheon,");
-  tft.println("see if I don't!");
-  return micros() - start;
-}
-
-unsigned long testLines(uint16_t color) {
-  unsigned long start, t;
-  int           x1, y1, x2, y2,
-                w = tft.width(),
-                h = tft.height();
-
-  tft.fillScreen(BLACK);
-
-  x1 = y1 = 0;
-  y2    = h - 1;
-  start = micros();
-  for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color);
-  x2    = w - 1;
-  for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color);
-  t     = micros() - start; // fillScreen doesn't count against timing
-
-  tft.fillScreen(BLACK);
-
-  x1    = w - 1;
-  y1    = 0;
-  y2    = h - 1;
-  start = micros();
-  for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color);
-  x2    = 0;
-  for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color);
-  t    += micros() - start;
-
-  tft.fillScreen(BLACK);
-
-  x1    = 0;
-  y1    = h - 1;
-  y2    = 0;
-  start = micros();
-  for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color);
-  x2    = w - 1;
-  for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color);
-  t    += micros() - start;
-
-  tft.fillScreen(BLACK);
-
-  x1    = w - 1;
-  y1    = h - 1;
-  y2    = 0;
-  start = micros();
-  for(x2=0; x2<w; x2+=6) tft.drawLine(x1, y1, x2, y2, color);
-  x2    = 0;
-  for(y2=0; y2<h; y2+=6) tft.drawLine(x1, y1, x2, y2, color);
-
-  return micros() - start;
-}
-
-unsigned long testFastLines(uint16_t color1, uint16_t color2) {
-  unsigned long start;
-  int           x, y, w = tft.width(), h = tft.height();
-
-  tft.fillScreen(BLACK);
-  start = micros();
-  for(y=0; y<h; y+=5) tft.drawFastHLine(0, y, w, color1);
-  for(x=0; x<w; x+=5) tft.drawFastVLine(x, 0, h, color2);
-
-  return micros() - start;
-}
-
-unsigned long testRects(uint16_t color) {
-  unsigned long start;
-  int           n, i, i2,
-                cx = tft.width()  / 2,
-                cy = tft.height() / 2;
-
-  tft.fillScreen(BLACK);
-  n     = min(tft.width(), tft.height());
-  start = micros();
-  for(i=2; i<n; i+=6) {
-    i2 = i / 2;
-    tft.drawRect(cx-i2, cy-i2, i, i, color);
-  }
-
-  return micros() - start;
-}
-
-unsigned long testFilledRects(uint16_t color1, uint16_t color2) {
-  unsigned long start, t = 0;
-  int           n, i, i2,
-                cx = tft.width()  / 2 - 1,
-                cy = tft.height() / 2 - 1;
-
-  tft.fillScreen(BLACK);
-  n = min(tft.width(), tft.height());
-  for(i=n; i>0; i-=6) {
-    i2    = i / 2;
-    start = micros();
-    tft.fillRect(cx-i2, cy-i2, i, i, color1);
-    t    += micros() - start;
-    // Outlines are not included in timing results
-    tft.drawRect(cx-i2, cy-i2, i, i, color2);
-  }
-
-  return t;
-}
-
-unsigned long testFilledCircles(uint8_t radius, uint16_t color) {
-  unsigned long start;
-  int x, y, w = tft.width(), h = tft.height(), r2 = radius * 2;
-
-  tft.fillScreen(BLACK);
-  start = micros();
-  for(x=radius; x<w; x+=r2) {
-    for(y=radius; y<h; y+=r2) {
-      tft.fillCircle(x, y, radius, color);
-    }
-  }
-
-  return micros() - start;
-}
-
-unsigned long testCircles(uint8_t radius, uint16_t color) {
-  unsigned long start;
-  int           x, y, r2 = radius * 2,
-                w = tft.width()  + radius,
-                h = tft.height() + radius;
-
-  // Screen is not cleared for this one -- this is
-  // intentional and does not affect the reported time.
-  start = micros();
-  for(x=0; x<w; x+=r2) {
-    for(y=0; y<h; y+=r2) {
-      tft.drawCircle(x, y, radius, color);
-    }
-  }
-
-  return micros() - start;
-}
-
-unsigned long testTriangles() {
-  unsigned long start;
-  int           n, i, cx = tft.width()  / 2 - 1,
-                      cy = tft.height() / 2 - 1;
-
-  tft.fillScreen(BLACK);
-  n     = min(cx, cy);
-  start = micros();
-  for(i=0; i<n; i+=5) {
-    tft.drawTriangle(
-      cx    , cy - i, // peak
-      cx - i, cy + i, // bottom left
-      cx + i, cy + i, // bottom right
-      tft.color565(0, 0, i));
-  }
-
-  return micros() - start;
-}
-
-unsigned long testFilledTriangles() {
-  unsigned long start, t = 0;
-  int           i, cx = tft.width()  / 2 - 1,
-                   cy = tft.height() / 2 - 1;
-
-  tft.fillScreen(BLACK);
-  start = micros();
-  for(i=min(cx,cy); i>10; i-=5) {
-    start = micros();
-    tft.fillTriangle(cx, cy - i, cx - i, cy + i, cx + i, cy + i,
-      tft.color565(0, i, i));
-    t += micros() - start;
-    tft.drawTriangle(cx, cy - i, cx - i, cy + i, cx + i, cy + i,
-      tft.color565(i, i, 0));
-  }
-
-  return t;
-}
-
-unsigned long testRoundRects() {
-  unsigned long start;
-  int           w, i, i2,
-                cx = tft.width()  / 2 - 1,
-                cy = tft.height() / 2 - 1;
-
-  tft.fillScreen(BLACK);
-  w     = min(tft.width(), tft.height());
-  start = micros();
-  for(i=0; i<w; i+=6) {
-    i2 = i / 2;
-    tft.drawRoundRect(cx-i2, cy-i2, i, i, i/8, tft.color565(i, 0, 0));
-  }
-
-  return micros() - start;
-}
-
-unsigned long testFilledRoundRects() {
-  unsigned long start;
-  int           i, i2,
-                cx = tft.width()  / 2 - 1,
-                cy = tft.height() / 2 - 1;
-
-  tft.fillScreen(BLACK);
-  start = micros();
-  for(i=min(tft.width(), tft.height()); i>20; i-=6) {
-    i2 = i / 2;
-    tft.fillRoundRect(cx-i2, cy-i2, i, i, i/8, tft.color565(0, i, 0));
-  }
-
-  return micros() - start;
-}

examples/rotationtest/rotationtest.pde

@@ -1,219 +0,0 @@
-// IMPORTANT: Adafruit_TFTLCD LIBRARY MUST BE SPECIFICALLY
-// CONFIGURED FOR EITHER THE TFT SHIELD OR THE BREAKOUT BOARD.
-// SEE RELEVANT COMMENTS IN Adafruit_TFTLCD.h FOR SETUP.
-
-#include <Adafruit_GFX.h>    // Core graphics library
-#include <Adafruit_TFTLCD.h> // Hardware-specific library
-
-// The control pins for the LCD can be assigned to any digital or
-// analog pins...but we'll use the analog pins as this allows us to
-// double up the pins with the touch screen (see the TFT paint example).
-#define LCD_CS A3 // Chip Select goes to Analog 3
-#define LCD_CD A2 // Command/Data goes to Analog 2
-#define LCD_WR A1 // LCD Write goes to Analog 1
-#define LCD_RD A0 // LCD Read goes to Analog 0
-
-#define LCD_RESET A4 // Can alternately just connect to Arduino's reset pin
-
-// When using the BREAKOUT BOARD only, use these 8 data lines to the LCD:
-// For the Arduino Uno, Duemilanove, Diecimila, etc.:
-//   D0 connects to digital pin 8  (Notice these are
-//   D1 connects to digital pin 9   NOT in order!)
-//   D2 connects to digital pin 2
-//   D3 connects to digital pin 3
-//   D4 connects to digital pin 4
-//   D5 connects to digital pin 5
-//   D6 connects to digital pin 6
-//   D7 connects to digital pin 7
-// For the Arduino Mega, use digital pins 22 through 29
-// (on the 2-row header at the end of the board).
-
-// Assign human-readable names to some common 16-bit color values:
-#define	BLACK   0x0000
-#define	BLUE    0x001F
-#define	RED     0xF800
-#define	GREEN   0x07E0
-#define CYAN    0x07FF
-#define MAGENTA 0xF81F
-#define YELLOW  0xFFE0
-#define WHITE   0xFFFF
-
-Adafruit_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);
-// If using the shield, all control and data lines are fixed, and
-// a simpler declaration can optionally be used:
-// Adafruit_TFTLCD tft;
-
-void setup(void) {
-  Serial.begin(9600);
-  Serial.println(F("TFT LCD test"));
-
-#ifdef USE_ADAFRUIT_SHIELD_PINOUT
-  Serial.println(F("Using Adafruit 2.8\" TFT Arduino Shield Pinout"));
-#else
-  Serial.println(F("Using Adafruit 2.8\" TFT Breakout Board Pinout"));
-#endif
-
-  tft.reset();
-
-  uint16_t identifier = tft.readID();
-
-  if(identifier == 0x9325) {
-    Serial.println(F("Found ILI9325 LCD driver"));
-  } else if(identifier == 0x9328) {
-    Serial.println(F("Found ILI9328 LCD driver"));
-  } else if(identifier == 0x7575) {
-    Serial.println(F("Found HX8347G LCD driver"));
-  } else {
-    Serial.print(F("Unknown LCD driver chip: "));
-    Serial.println(identifier, HEX);
-    Serial.println(F("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
-    Serial.println(F("  #define USE_ADAFRUIT_SHIELD_PINOUT"));
-    Serial.println(F("should appear in the library header (Adafruit_TFT.h)."));
-    Serial.println(F("If using the breakout board, it should NOT be #defined!"));
-    Serial.println(F("Also if using the breakout, double-check that all wiring"));
-    Serial.println(F("matches the tutorial."));
-    return;
-  }
-
-  tft.begin(identifier);
-
-  tft.fillScreen(BLACK);
-
-  Serial.println(F("This is a test of the rotation capabilities of the TFT library!"));
-  Serial.println(F("Press <SEND> (or type a character) to advance"));
-}
-
-void loop(void) {
-  rotatePixel();
-  rotateLine();
-  rotateFastline();
-  rotateDrawrect();
-  rotateFillrect();
-  rotateDrawcircle();
-  rotateFillcircle();
-  rotateText();
-}
-
-void rotateText() {
-  for (uint8_t i=0; i<4; i++) {
-    tft.fillScreen(BLACK);
-    Serial.println(tft.getRotation(), DEC);
-
-    tft.setCursor(0, 30);
-    tft.setTextColor(RED);
-    tft.setTextSize(1);
-    tft.println("Hello World!");
-    tft.setTextColor(YELLOW);
-    tft.setTextSize(2);
-    tft.println("Hello World!");
-    tft.setTextColor(GREEN);
-    tft.setTextSize(3);
-    tft.println("Hello World!");
-    tft.setTextColor(BLUE);
-    tft.setTextSize(4);
-    tft.print(1234.567);
-
-    while (!Serial.available());
-    Serial.read();  Serial.read();  Serial.read();
-
-    tft.setRotation(tft.getRotation()+1);
-  }
-}
-
-void rotateFillcircle(void) {
-  for (uint8_t i=0; i<4; i++) {
-    tft.fillScreen(BLACK);
-    Serial.println(tft.getRotation(), DEC);
-
-    tft.fillCircle(10, 30, 10, YELLOW);
-
-    while (!Serial.available());
-    Serial.read();  Serial.read();  Serial.read();
-
-    tft.setRotation(tft.getRotation()+1);
-  }
-}
-
-void rotateDrawcircle(void) {
-  for (uint8_t i=0; i<4; i++) {
-    tft.fillScreen(BLACK);
-    Serial.println(tft.getRotation(), DEC);
-
-    tft.drawCircle(10, 30, 10, YELLOW);
-
-    while (!Serial.available());
-    Serial.read();  Serial.read();  Serial.read();
-
-    tft.setRotation(tft.getRotation()+1);
-  }
-}
-
-void rotateFillrect(void) {
-  for (uint8_t i=0; i<4; i++) {
-    tft.fillScreen(BLACK);
-    Serial.println(tft.getRotation(), DEC);
-
-    tft.fillRect(10, 20, 10, 20, GREEN);
-
-    while (!Serial.available());
-    Serial.read();  Serial.read();  Serial.read();
-
-    tft.setRotation(tft.getRotation()+1);
-  }
-}
-
-void rotateDrawrect(void) {
-  for (uint8_t i=0; i<4; i++) {
-    tft.fillScreen(BLACK);
-    Serial.println(tft.getRotation(), DEC);
-
-    tft.drawRect(10, 20, 10, 20, GREEN);
-
-    while (!Serial.available());
-    Serial.read();  Serial.read();  Serial.read();
-
-    tft.setRotation(tft.getRotation()+1);
-  }
-}
-
-void rotateFastline(void) {
-  for (uint8_t i=0; i<4; i++) {
-    tft.fillScreen(BLACK);
-    Serial.println(tft.getRotation(), DEC);
-
-    tft.drawFastHLine(0, 20, tft.width(), RED);
-    tft.drawFastVLine(20, 0, tft.height(), BLUE);
-
-    while (!Serial.available());
-    Serial.read();  Serial.read();  Serial.read();
-
-    tft.setRotation(tft.getRotation()+1);
-  }
-}
-
-void rotateLine(void) {
-  for (uint8_t i=0; i<4; i++) {
-    tft.fillScreen(BLACK);
-    Serial.println(tft.getRotation(), DEC);
-
-    tft.drawLine(tft.width()/2, tft.height()/2, 0, 0, RED);
-    while (!Serial.available());
-    Serial.read();  Serial.read();  Serial.read();
-
-    tft.setRotation(tft.getRotation()+1);
-  }
-}
-
-void rotatePixel(void) {
-  for (uint8_t i=0; i<4; i++) {
-    tft.fillScreen(BLACK);
-    Serial.println(tft.getRotation(), DEC);
-
-    tft.drawPixel(10,20, RED);
-    while (!Serial.available());
-    Serial.read();  Serial.read();  Serial.read();
-
-    tft.setRotation(tft.getRotation()+1);
-  }
-}
-

examples/tftbmp/tftbmp.pde

@@ -1,58 +1,86 @@
-// BMP-loading example specifically for the TFTLCD breakout board.
-// If using the Arduino shield, use the tftbmp_shield.pde sketch instead!
-// If using an Arduino Mega, make sure the SD library is configured for
-// 'soft' SPI in the file Sd2Card.h.
+// BMP-loading demo rigged specifically for the SAMD21 branch
+// of TFTLCD and the ItsyBitsy M4 board.  TFTLCD lib MUST be
+// configured for the breakout board option, plus there's
+// some wiring shenanigans...
 
+// LCD_WR MUST go to pin D4, because we're using a specific
+// timer/counter for PWM output.  The pin # could be changed
+// IF a corresponding timer change is made in the SAMD21 TFTLIB.
+
+// One of two additional wiring changes MUST be made.  Either:
+// LCD_WR MUST go through an inverter (e.g. 74HC04)
+//  -or-
+// The TFT 'CS' pin MUST be tied HIGH (ignoring LCD_CS setting)
+// If you opt for this latter arrangement, you CANNOT read the
+// device ID from the display (or anything else) -- see setup()
+// where 'identifier' is hardcoded;
+
+// Data pins are as follows:
+//   D0 connects to digital pin 0  (Notice these are
+//   D1 connects to digital pin 1   NOT in order!)
+//   D2 connects to digital pin 7
+//   D3 connects to digital pin 9
+//   D4 connects to digital pin 10
+//   D5 connects to digital pin 11
+//   D6 connects to digital pin 13
+//   D7 connects to digital pin 12
+
+#include <SD.h>
 #include <Adafruit_GFX.h>    // Core graphics library
 #include <Adafruit_TFTLCD.h> // Hardware-specific library
-#include <SD.h>
 
-// The control pins for the LCD can be assigned to any digital or
-// analog pins...but we'll use the analog pins as this allows us to
-// double up the pins with the touch screen (see the TFT paint example).
-#define LCD_CS A3 // Chip Select goes to Analog 3
-#define LCD_CD A2 // Command/Data goes to Analog 2
-#define LCD_WR A1 // LCD Write goes to Analog 1
-#define LCD_RD A0 // LCD Read goes to Analog 0
+#define LCD_CS A3 // Chip Select (see notes above)
+#define LCD_CD A2 // Command/Data
+#define LCD_RD A0 // LCD Read strobe
+#define LCD_WR  4 // LCD Write strobe (see notes above)
 
-// When using the BREAKOUT BOARD only, use these 8 data lines to the LCD:
-// For the Arduino Uno, Duemilanove, Diecimila, etc.:
-//   D0 connects to digital pin 8  (Notice these are
-//   D1 connects to digital pin 9   NOT in order!)
-//   D2 connects to digital pin 2
-//   D3 connects to digital pin 3
-//   D4 connects to digital pin 4
-//   D5 connects to digital pin 5
-//   D6 connects to digital pin 6
-//   D7 connects to digital pin 7
-// For the Arduino Mega, use digital pins 22 through 29
-// (on the 2-row header at the end of the board).
+#define LCD_RESET A4 // Alternately just connect to Arduino's reset pin
 
-// For Arduino Uno/Duemilanove, etc
-//  connect the SD card with DI going to pin 11, DO going to pin 12 and SCK going to pin 13 (standard)
-//  Then pin 10 goes to CS (or whatever you have set up)
-#define SD_CS 10     // Set the chip select line to whatever you use (10 doesnt conflict with the library)
+// DO NOT use the SD card slot on the TFT breakout -- it doesn't
+// appear to work when using the parallel interface.  Instead, a
+// separate SD breakout is needed.
+
+#define SD_CS A5 // SD card delect
+
+// A switch or jumper on A1 selects DMA vs non-DMA BMP loading.
+// There's really not a huge performance difference in this case
+// just because the bottleneck is in the SD card access and color
+// conversion operations...BUT...it does demonstrate how the
+// pushColorsDMA() function works, and how to use a callback to
+// load the next block of data while the current block is sent.
+#define DMA_SELECT A1 // Hi/lo chooses DMA vs non-DMA DMA loader
 
 // In the SD card, place 24 bit color BMP files (be sure they are 24-bit!)
 // There are examples in the sketch folder
 
 // our TFT wiring
-Adafruit_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, A4);
+Adafruit_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);
 
 void setup()
 {
   Serial.begin(9600);
+  while(!Serial);
+
+  pinMode(DMA_SELECT, INPUT_PULLUP);
 
   tft.reset();
 
   uint16_t identifier = tft.readID();
 
+  // SEE NOTES ABOVE - this is necessary IF using the
+  // hard-wired CS (and no inverter) option.
+  identifier = 0x9341;
+
   if(identifier == 0x9325) {
     Serial.println(F("Found ILI9325 LCD driver"));
   } else if(identifier == 0x9328) {
     Serial.println(F("Found ILI9328 LCD driver"));
   } else if(identifier == 0x7575) {
     Serial.println(F("Found HX8347G LCD driver"));
+  } else if(identifier == 0x9341) {
+    Serial.println(F("Found ILI9341 LCD driver"));
+  } else if(identifier == 0x8357) {
+    Serial.println(F("Found HX8357D LCD driver"));
   } else {
     Serial.print(F("Unknown LCD driver chip: "));
     Serial.println(identifier, HEX);
@@ -66,16 +94,23 @@ void setup()
   }
 
   tft.begin(identifier);
+  tft.fillScreen(0);
 
   Serial.print(F("Initializing SD card..."));
   if (!SD.begin(SD_CS)) {
     Serial.println(F("failed!"));
-    return;
+    tft.fillScreen(0xF800);
+    for(;;);
   }
-  Serial.println(F("OK!"));
 
-  bmpDraw("woof.bmp", 0, 0);
-  delay(1000);
+  Serial.println(F("OK!"));
+  tft.fillScreen(0x001F);
+
+  if(digitalRead(DMA_SELECT))
+    bmpDrawDMA("woof.bmp", 0, 0);
+  else
+    bmpDraw("woof.bmp", 0, 0);
+//  delay(1000);
 }
 
 void loop()
@@ -84,12 +119,39 @@ void loop()
     tft.setRotation(i);
     tft.fillScreen(0);
     for(int j=0; j <= 200; j += 50) {
-      bmpDraw("miniwoof.bmp", j, j);
+      if(digitalRead(DMA_SELECT))
+        bmpDrawDMA("miniwoof.bmp", j, j);
+      else
+        bmpDraw("miniwoof.bmp", j, j);
     }
-    delay(1000);
+//    delay(1000);
   }
 }
 
+// Common functions/vars for both BMP loaders ------------------------------
+
+// These read 16- and 32-bit types from the SD card file.
+// BMP data is stored little-endian, Arduino is little-endian too.
+// May need to reverse subscript order if porting elsewhere.
+
+uint16_t read16(File f) {
+  uint16_t result;
+  ((uint8_t *)&result)[0] = f.read(); // LSB
+  ((uint8_t *)&result)[1] = f.read(); // MSB
+  return result;
+}
+
+uint32_t read32(File f) {
+  uint32_t result;
+  ((uint8_t *)&result)[0] = f.read(); // LSB
+  ((uint8_t *)&result)[1] = f.read();
+  ((uint8_t *)&result)[2] = f.read();
+  ((uint8_t *)&result)[3] = f.read(); // MSB
+  return result;
+}
+
+// "Vanilla" (non-DMA) BMP Loader ------------------------------------------
+
 // This function opens a Windows Bitmap (BMP) file and
 // displays it at the given coordinates.  It's sped up
 // by reading many pixels worth of data at a time
@@ -98,10 +160,9 @@ void loop()
 // makes loading a little faster.  20 pixels seems a
 // good balance.
 
-#define BUFFPIXEL 20
+#define BUFFPIXEL 64
 
 void bmpDraw(char *filename, int x, int y) {
-
   File     bmpFile;
   int      bmpWidth, bmpHeight;   // W+H in pixels
   uint8_t  bmpDepth;              // Bit depth (currently must be 24)
@@ -117,6 +178,7 @@ void bmpDraw(char *filename, int x, int y) {
   uint32_t pos = 0, startTime = millis();
   uint8_t  lcdidx = 0;
   boolean  first = true;
+  uint16_t col16;
 
   if((x >= tft.width()) || (y >= tft.height())) return;
 
@@ -203,7 +265,8 @@ void bmpDraw(char *filename, int x, int y) {
             b = sdbuffer[buffidx++];
             g = sdbuffer[buffidx++];
             r = sdbuffer[buffidx++];
-            lcdbuffer[lcdidx++] = tft.color565(r,g,b);
+            col16 = tft.color565(r,g,b);
+            lcdbuffer[lcdidx++] = (col16 * 0x00010001) >> 8; // Flip hi/lo bytes
           } // end pixel
         } // end scanline
         // Write any remaining data to LCD
@@ -216,28 +279,141 @@ void bmpDraw(char *filename, int x, int y) {
       } // end goodBmp
     }
   }
+  tft.setAddrWindow(0, 0, tft.width() - 1, tft.height() - 1);
 
   bmpFile.close();
   if(!goodBmp) Serial.println(F("BMP format not recognized."));
 }
 
-// These read 16- and 32-bit types from the SD card file.
-// BMP data is stored little-endian, Arduino is little-endian too.
-// May need to reverse subscript order if porting elsewhere.
+// DMA BMP Loader ----------------------------------------------------------
 
-uint16_t read16(File f) {
-  uint16_t result;
-  ((uint8_t *)&result)[0] = f.read(); // LSB
-  ((uint8_t *)&result)[1] = f.read(); // MSB
-  return result;
+// DMA buffer: 320 pixels max width, DMALINES height, 2 bytes/pixel, 2 bufs
+// SD buffer: 320 pixels max width, one scanline
+#define DMALINES 16
+uint8_t dmabuf[DMALINES * 320 * 2 * 2];
+uint8_t sdbuf[320 * 3];
+
+File     bmpFile;
+uint32_t bmpImageoffset;        // Start of image data in file
+int      lineNum, linesToGo;    // Current, remaining lines to load
+boolean  flip;                  // BMP is stored bottom-to-top
+int      bmpHeight;             // Uncropped height in pixels
+int      croppedWidth;          // Cropped width in pixels
+uint32_t rowSize;               // Not always bmpWidth; may have padding
+
+void bmpCallback(uint8_t *dest, uint16_t len) {
+  int      row, col, linesThisPass;
+  uint8_t  r, g, b, *ptr;
+  uint16_t col16;
+  uint32_t pos;
+
+  linesThisPass = (linesToGo > DMALINES) ? DMALINES : linesToGo;
+
+  for(row=0; row<linesThisPass; row++, lineNum++) { // For each scanline...
+    // Seek to start of scan line.  It might seem labor-
+    // intensive to be doing this on every line, but this
+    // method covers a lot of gritty details like cropping
+    // and scanline padding.  Also, the seek only takes
+    // place if the file position actually needs to change
+    // (avoids a lot of cluster math in SD library).
+    if(flip) // Bitmap is stored bottom-to-top order (normal BMP)
+      pos = bmpImageoffset + (bmpHeight - 1 - lineNum) * rowSize;
+    else     // Bitmap is stored top-to-bottom
+      pos = bmpImageoffset + lineNum * rowSize;
+    if(bmpFile.position() != pos) { // Need seek?
+      bmpFile.seek(pos);
+    }
+
+    bmpFile.read(sdbuf, croppedWidth * 3); // Read scanline
+    ptr = sdbuf;
+    for(col=0; col<croppedWidth; col++) { // For each column...
+      // Convert pixel from BMP to TFT format
+      b = *ptr++;
+      g = *ptr++;
+      r = *ptr++;
+      col16 = tft.color565(r,g,b);
+      *dest++ = col16 >> 8; // High byte
+      *dest++ = col16;      // Low byte
+    } // end pixel
+  } // end scanline
+
+  linesToGo -= linesThisPass;
 }
 
-uint32_t read32(File f) {
-  uint32_t result;
-  ((uint8_t *)&result)[0] = f.read(); // LSB
-  ((uint8_t *)&result)[1] = f.read();
-  ((uint8_t *)&result)[2] = f.read();
-  ((uint8_t *)&result)[3] = f.read(); // MSB
-  return result;
+void bmpDrawDMA(char *filename, int x, int y) {
+  int      bmpWidth;              // Image width in pixels
+  uint8_t  bmpDepth;              // Bit depth (currently must be 24)
+  boolean  goodBmp = false;       // Set to true on valid header parse
+  int      w, h;
+  uint32_t startTime = millis();
+
+  if((x >= tft.width()) || (y >= tft.height())) return;
+
+  Serial.println();
+  Serial.print(F("Loading image '"));
+  Serial.print(filename);
+  Serial.println('\'');
+  // Open requested file on SD card
+  if ((bmpFile = SD.open(filename)) == NULL) {
+    Serial.println(F("File not found"));
+    return;
+  }
+
+  // Parse BMP header
+  if(read16(bmpFile) == 0x4D42) { // BMP signature
+    Serial.println(F("File size: ")); Serial.println(read32(bmpFile));
+    (void)read32(bmpFile); // Read & ignore creator bytes
+    bmpImageoffset = read32(bmpFile); // Start of image data
+    Serial.print(F("Image Offset: ")); Serial.println(bmpImageoffset, DEC);
+    // Read DIB header
+    Serial.print(F("Header size: ")); Serial.println(read32(bmpFile));
+    bmpWidth  = read32(bmpFile);
+    bmpHeight = read32(bmpFile);
+    if(read16(bmpFile) == 1) { // # planes -- must be '1'
+      bmpDepth = read16(bmpFile); // bits per pixel
+      Serial.print(F("Bit Depth: ")); Serial.println(bmpDepth);
+      if((bmpDepth == 24) && (read32(bmpFile) == 0)) { // 0 = uncompressed
+
+        goodBmp = true; // Supported BMP format -- proceed!
+        Serial.print(F("Image size: "));
+        Serial.print(bmpWidth);
+        Serial.print('x');
+        Serial.println(bmpHeight);
+
+        // BMP rows are padded (if needed) to 4-byte boundary
+        rowSize = (bmpWidth * 3 + 3) & ~3;
+
+        // If bmpHeight is negative, image is in top-down order.
+        // This is not canon but has been observed in the wild.
+        if(bmpHeight < 0) {
+          bmpHeight = -bmpHeight;
+          flip      = false;
+        } else {
+          flip      = true;
+        }
+
+        // Crop area to be loaded
+        w = bmpWidth;
+        h = bmpHeight;
+        if((x+w-1) >= tft.width())  w = tft.width()  - x;
+        if((y+h-1) >= tft.height()) h = tft.height() - y;
+
+        // Set TFT address window to clipped image bounds
+        tft.setAddrWindow(x, y, x+w-1, y+h-1);
+        croppedWidth = w;
+        lineNum      = 0;
+        linesToGo    = h;
+        tft.pushColorsDMA(w * h * 2, dmabuf, w * DMALINES * 2, bmpCallback);
+
+        Serial.print(F("Loaded in "));
+        Serial.print(millis() - startTime);
+        Serial.println(" ms");
+      } // end goodBmp
+    }
+  }
+  tft.setAddrWindow(0, 0, tft.width() - 1, tft.height() - 1);
+
+  bmpFile.close();
+  if(!goodBmp) Serial.println(F("BMP format not recognized."));
 }
 

examples/tftbmp_shield/tftbmp_shield.pde

@@ -1,225 +0,0 @@
-// BMP-loading example specifically for the TFTLCD Arduino shield.
-// If using the breakout board, use the tftbmp.pde sketch instead!
-// If using an Arduino Mega, make sure the SD library is configured for
-// 'soft' SPI in the file Sd2Card.h.
-
-#include <Adafruit_GFX.h>    // Core graphics library
-#include <Adafruit_TFTLCD.h> // Hardware-specific library
-#include <SD.h>
-
-// In the SD card, place 24 bit color BMP files (be sure they are 24-bit!)
-// There are examples in the sketch folder
-
-#define SD_CS 5 // Card select for shield use
-
-Adafruit_TFTLCD tft;
-uint8_t         spi_save;
-
-void setup()
-{
-  Serial.begin(9600);
- 
-  tft.reset();
-
-  uint16_t identifier = tft.readID();
-
-  if(identifier == 0x9325) {
-    Serial.println(F("Found ILI9325 LCD driver"));
-  } else if(identifier == 0x9328) {
-    Serial.println(F("Found ILI9328 LCD driver"));
-  } else if(identifier == 0x7575) {
-    Serial.println(F("Found HX8347G LCD driver"));
-  } else {
-    Serial.print(F("Unknown LCD driver chip: "));
-    Serial.println(identifier, HEX);
-    Serial.println(F("If using the Adafruit 2.8\" TFT Arduino shield, the line:"));
-    Serial.println(F("  #define USE_ADAFRUIT_SHIELD_PINOUT"));
-    Serial.println(F("should appear in the library header (Adafruit_TFT.h)."));
-    Serial.println(F("If using the breakout board, it should NOT be #defined!"));
-    Serial.println(F("Also if using the breakout, double-check that all wiring"));
-    Serial.println(F("matches the tutorial."));
-    return;
-  }
- 
-  tft.begin(identifier);
-
-  Serial.print(F("Initializing SD card..."));
-  if (!SD.begin(SD_CS)) {
-    Serial.println(F("failed!"));
-    return;
-  }
-  Serial.println(F("OK!"));
-  spi_save = SPCR;
-
-  bmpDraw("woof.bmp", 0, 0);
-  delay(1000);
-}
-
-void loop()
-{
-  for(int i = 0; i<4; i++) {
-    tft.setRotation(i);
-    tft.fillScreen(0);
-    for(int j=0; j <= 200; j += 50) {
-      bmpDraw("miniwoof.bmp", j, j);
-    }
-    delay(1000);
-  }
-}
-
-// This function opens a Windows Bitmap (BMP) file and
-// displays it at the given coordinates.  It's sped up
-// by reading many pixels worth of data at a time
-// (rather than pixel by pixel).  Increasing the buffer
-// size takes more of the Arduino's precious RAM but
-// makes loading a little faster.  20 pixels seems a
-// good balance.
-
-#define BUFFPIXEL 20
-
-void bmpDraw(char *filename, int x, int y) {
-  File     bmpFile;
-  int      bmpWidth, bmpHeight;   // W+H in pixels
-  uint8_t  bmpDepth;              // Bit depth (currently must be 24)
-  uint32_t bmpImageoffset;        // Start of image data in file
-  uint32_t rowSize;               // Not always = bmpWidth; may have padding
-  uint8_t  sdbuffer[3*BUFFPIXEL]; // pixel in buffer (R+G+B per pixel)
-  uint16_t lcdbuffer[BUFFPIXEL];  // pixel out buffer (16-bit per pixel)
-  uint8_t  buffidx = sizeof(sdbuffer); // Current position in sdbuffer
-  boolean  goodBmp = false;       // Set to true on valid header parse
-  boolean  flip    = true;        // BMP is stored bottom-to-top
-  int      w, h, row, col;
-  uint8_t  r, g, b;
-  uint32_t pos = 0, startTime = millis();
-  uint8_t  lcdidx = 0;
-  boolean  first = true;
-
-  if((x >= tft.width()) || (y >= tft.height())) return;
-
-  Serial.println();
-  Serial.print("Loading image '");
-  Serial.print(filename);
-  Serial.println('\'');
-  // Open requested file on SD card
-  SPCR = spi_save;
-  if ((bmpFile = SD.open(filename)) == NULL) {
-    Serial.print("File not found");
-    return;
-  }
-
-  // Parse BMP header
-  if(read16(bmpFile) == 0x4D42) { // BMP signature
-    Serial.print(F("File size: ")); Serial.println(read32(bmpFile));
-    (void)read32(bmpFile); // Read & ignore creator bytes
-    bmpImageoffset = read32(bmpFile); // Start of image data
-    Serial.print(F("Image Offset: ")); Serial.println(bmpImageoffset, DEC);
-    // Read DIB header
-    Serial.print(F("Header size: ")); Serial.println(read32(bmpFile));
-    bmpWidth  = read32(bmpFile);
-    bmpHeight = read32(bmpFile);
-    if(read16(bmpFile) == 1) { // # planes -- must be '1'
-      bmpDepth = read16(bmpFile); // bits per pixel
-      Serial.print(F("Bit Depth: ")); Serial.println(bmpDepth);
-      if((bmpDepth == 24) && (read32(bmpFile) == 0)) { // 0 = uncompressed
-
-        goodBmp = true; // Supported BMP format -- proceed!
-        Serial.print(F("Image size: "));
-        Serial.print(bmpWidth);
-        Serial.print('x');
-        Serial.println(bmpHeight);
-
-        // BMP rows are padded (if needed) to 4-byte boundary
-        rowSize = (bmpWidth * 3 + 3) & ~3;
-
-        // If bmpHeight is negative, image is in top-down order.
-        // This is not canon but has been observed in the wild.
-        if(bmpHeight < 0) {
-          bmpHeight = -bmpHeight;
-          flip      = false;
-        }
-
-        // Crop area to be loaded
-        w = bmpWidth;
-        h = bmpHeight;
-        if((x+w-1) >= tft.width())  w = tft.width()  - x;
-        if((y+h-1) >= tft.height()) h = tft.height() - y;
-
-        // Set TFT address window to clipped image bounds
-        SPCR = 0;
-        tft.setAddrWindow(x, y, x+w-1, y+h-1);
-
-        for (row=0; row<h; row++) { // For each scanline...
-          // Seek to start of scan line.  It might seem labor-
-          // intensive to be doing this on every line, but this
-          // method covers a lot of gritty details like cropping
-          // and scanline padding.  Also, the seek only takes
-          // place if the file position actually needs to change
-          // (avoids a lot of cluster math in SD library).
-          if(flip) // Bitmap is stored bottom-to-top order (normal BMP)
-            pos = bmpImageoffset + (bmpHeight - 1 - row) * rowSize;
-          else     // Bitmap is stored top-to-bottom
-            pos = bmpImageoffset + row * rowSize;
-          SPCR = spi_save;
-          if(bmpFile.position() != pos) { // Need seek?
-            bmpFile.seek(pos);
-            buffidx = sizeof(sdbuffer); // Force buffer reload
-          }
-
-          for (col=0; col<w; col++) { // For each column...
-            // Time to read more pixel data?
-            if (buffidx >= sizeof(sdbuffer)) { // Indeed
-              // Push LCD buffer to the display first
-              if(lcdidx > 0) {
-                SPCR   = 0;
-                tft.pushColors(lcdbuffer, lcdidx, first);
-                lcdidx = 0;
-                first  = false;
-              }
-              SPCR = spi_save;
-              bmpFile.read(sdbuffer, sizeof(sdbuffer));
-              buffidx = 0; // Set index to beginning
-            }
-
-            // Convert pixel from BMP to TFT format
-            b = sdbuffer[buffidx++];
-            g = sdbuffer[buffidx++];
-            r = sdbuffer[buffidx++];
-            lcdbuffer[lcdidx++] = tft.color565(r,g,b);
-          } // end pixel
-        } // end scanline
-        // Write any remaining data to LCD
-        if(lcdidx > 0) {
-          SPCR = 0;
-          tft.pushColors(lcdbuffer, lcdidx, first);
-        } 
-        Serial.print(F("Loaded in "));
-        Serial.print(millis() - startTime);
-        Serial.println(" ms");
-      } // end goodBmp
-    }
-  }
-
-  bmpFile.close();
-  if(!goodBmp) Serial.println("BMP format not recognized.");
-}
-
-// These read 16- and 32-bit types from the SD card file.
-// BMP data is stored little-endian, Arduino is little-endian too.
-// May need to reverse subscript order if porting elsewhere.
-
-uint16_t read16(File f) {
-  uint16_t result;
-  ((uint8_t *)&result)[0] = f.read(); // LSB
-  ((uint8_t *)&result)[1] = f.read(); // MSB
-  return result;
-}
-
-uint32_t read32(File f) {
-  uint32_t result;
-  ((uint8_t *)&result)[0] = f.read(); // LSB
-  ((uint8_t *)&result)[1] = f.read();
-  ((uint8_t *)&result)[2] = f.read();
-  ((uint8_t *)&result)[3] = f.read(); // MSB
-  return result;
-}
-

examples/tftpaint/tftpaint.ino

@@ -1,199 +0,0 @@
-// Paint example specifically for the TFTLCD breakout board.
-// If using the Arduino shield, use the tftpaint_shield.pde sketch instead!
-// DOES NOT CURRENTLY WORK ON ARDUINO LEONARDO
-
-#include <Adafruit_GFX.h>    // Core graphics library
-#include <Adafruit_TFTLCD.h> // Hardware-specific library
-#include <TouchScreen.h>
-
-#if defined(__SAM3X8E__)
-    #undef __FlashStringHelper::F(string_literal)
-    #define F(string_literal) string_literal
-#endif
-
-// When using the BREAKOUT BOARD only, use these 8 data lines to the LCD:
-// For the Arduino Uno, Duemilanove, Diecimila, etc.:
-//   D0 connects to digital pin 8  (Notice these are
-//   D1 connects to digital pin 9   NOT in order!)
-//   D2 connects to digital pin 2
-//   D3 connects to digital pin 3
-//   D4 connects to digital pin 4
-//   D5 connects to digital pin 5
-//   D6 connects to digital pin 6
-//   D7 connects to digital pin 7
-
-// For the Arduino Mega, use digital pins 22 through 29
-// (on the 2-row header at the end of the board).
-//   D0 connects to digital pin 22
-//   D1 connects to digital pin 23
-//   D2 connects to digital pin 24
-//   D3 connects to digital pin 25
-//   D4 connects to digital pin 26
-//   D5 connects to digital pin 27
-//   D6 connects to digital pin 28
-//   D7 connects to digital pin 29
-
-// For the Arduino Due, use digital pins 33 through 40
-// (on the 2-row header at the end of the board).
-//   D0 connects to digital pin 33
-//   D1 connects to digital pin 34
-//   D2 connects to digital pin 35
-//   D3 connects to digital pin 36
-//   D4 connects to digital pin 37
-//   D5 connects to digital pin 38
-//   D6 connects to digital pin 39
-//   D7 connects to digital pin 40
-
-#define YP A3  // must be an analog pin, use "An" notation!
-#define XM A2  // must be an analog pin, use "An" notation!
-#define YM 9   // can be a digital pin
-#define XP 8   // can be a digital pin
-
-#define TS_MINX 150
-#define TS_MINY 120
-#define TS_MAXX 920
-#define TS_MAXY 940
-
-// For better pressure precision, we need to know the resistance
-// between X+ and X- Use any multimeter to read it
-// For the one we're using, its 300 ohms across the X plate
-TouchScreen ts = TouchScreen(XP, YP, XM, YM, 300);
-
-#define LCD_CS A3
-#define LCD_CD A2
-#define LCD_WR A1
-#define LCD_RD A0
-// optional
-#define LCD_RESET A4
-
-// Assign human-readable names to some common 16-bit color values:
-#define	BLACK   0x0000
-#define	BLUE    0x001F
-#define	RED     0xF800
-#define	GREEN   0x07E0
-#define CYAN    0x07FF
-#define MAGENTA 0xF81F
-#define YELLOW  0xFFE0
-#define WHITE   0xFFFF
-
-
-Adafruit_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);
-
-#define BOXSIZE 40
-#define PENRADIUS 3
-int oldcolor, currentcolor;
-
-void setup(void) {
-  Serial.begin(9600);
-  Serial.println(F("Paint!"));
-  
-  tft.reset();
-  
-  uint16_t identifier = tft.readID();
-
-  if(identifier == 0x9325) {
-    Serial.println(F("Found ILI9325 LCD driver"));
-  } else if(identifier == 0x9328) {
-    Serial.println(F("Found ILI9328 LCD driver"));
-  } else if(identifier == 0x7575) {
-    Serial.println(F("Found HX8347G LCD driver"));
-  } else {
-    Serial.print(F("Unknown LCD driver chip: "));
-    Serial.println(identifier, HEX);
-    return;
-  }
-
-  tft.begin(identifier);
-
-  tft.fillScreen(BLACK);
-
-  tft.fillRect(0, 0, BOXSIZE, BOXSIZE, RED);
-  tft.fillRect(BOXSIZE, 0, BOXSIZE, BOXSIZE, YELLOW);
-  tft.fillRect(BOXSIZE*2, 0, BOXSIZE, BOXSIZE, GREEN);
-  tft.fillRect(BOXSIZE*3, 0, BOXSIZE, BOXSIZE, CYAN);
-  tft.fillRect(BOXSIZE*4, 0, BOXSIZE, BOXSIZE, BLUE);
-  tft.fillRect(BOXSIZE*5, 0, BOXSIZE, BOXSIZE, MAGENTA);
-  // tft.fillRect(BOXSIZE*6, 0, BOXSIZE, BOXSIZE, WHITE);
- 
-  tft.drawRect(0, 0, BOXSIZE, BOXSIZE, WHITE);
-  currentcolor = RED;
- 
-  pinMode(13, OUTPUT);
-}
-
-#define MINPRESSURE 10
-#define MAXPRESSURE 1000
-
-void loop()
-{
-  digitalWrite(13, HIGH);
-  Point p = ts.getPoint();
-  digitalWrite(13, LOW);
-
-  // if sharing pins, you'll need to fix the directions of the touchscreen pins
-  //pinMode(XP, OUTPUT);
-  pinMode(XM, OUTPUT);
-  pinMode(YP, OUTPUT);
-  //pinMode(YM, OUTPUT);
-
-  // we have some minimum pressure we consider 'valid'
-  // pressure of 0 means no pressing!
-
-  if (p.z > MINPRESSURE && p.z < MAXPRESSURE) {
-    /*
-    Serial.print("X = "); Serial.print(p.x);
-    Serial.print("\tY = "); Serial.print(p.y);
-    Serial.print("\tPressure = "); Serial.println(p.z);
-    */
-    
-    if (p.y < (TS_MINY-5)) {
-      Serial.println("erase");
-      // press the bottom of the screen to erase 
-      tft.fillRect(0, BOXSIZE, tft.width(), tft.height()-BOXSIZE, BLACK);
-    }
-    // scale from 0->1023 to tft.width
-    p.x = map(p.x, TS_MINX, TS_MAXX, tft.width(), 0);
-    p.y = map(p.y, TS_MINY, TS_MAXY, tft.height(), 0);
-    /*
-    Serial.print("("); Serial.print(p.x);
-    Serial.print(", "); Serial.print(p.y);
-    Serial.println(")");
-    */
-    if (p.y < BOXSIZE) {
-       oldcolor = currentcolor;
-
-       if (p.x < BOXSIZE) { 
-         currentcolor = RED; 
-         tft.drawRect(0, 0, BOXSIZE, BOXSIZE, WHITE);
-       } else if (p.x < BOXSIZE*2) {
-         currentcolor = YELLOW;
-         tft.drawRect(BOXSIZE, 0, BOXSIZE, BOXSIZE, WHITE);
-       } else if (p.x < BOXSIZE*3) {
-         currentcolor = GREEN;
-         tft.drawRect(BOXSIZE*2, 0, BOXSIZE, BOXSIZE, WHITE);
-       } else if (p.x < BOXSIZE*4) {
-         currentcolor = CYAN;
-         tft.drawRect(BOXSIZE*3, 0, BOXSIZE, BOXSIZE, WHITE);
-       } else if (p.x < BOXSIZE*5) {
-         currentcolor = BLUE;
-         tft.drawRect(BOXSIZE*4, 0, BOXSIZE, BOXSIZE, WHITE);
-       } else if (p.x < BOXSIZE*6) {
-         currentcolor = MAGENTA;
-         tft.drawRect(BOXSIZE*5, 0, BOXSIZE, BOXSIZE, WHITE);
-       }
-
-       if (oldcolor != currentcolor) {
-          if (oldcolor == RED) tft.fillRect(0, 0, BOXSIZE, BOXSIZE, RED);
-          if (oldcolor == YELLOW) tft.fillRect(BOXSIZE, 0, BOXSIZE, BOXSIZE, YELLOW);
-          if (oldcolor == GREEN) tft.fillRect(BOXSIZE*2, 0, BOXSIZE, BOXSIZE, GREEN);
-          if (oldcolor == CYAN) tft.fillRect(BOXSIZE*3, 0, BOXSIZE, BOXSIZE, CYAN);
-          if (oldcolor == BLUE) tft.fillRect(BOXSIZE*4, 0, BOXSIZE, BOXSIZE, BLUE);
-          if (oldcolor == MAGENTA) tft.fillRect(BOXSIZE*5, 0, BOXSIZE, BOXSIZE, MAGENTA);
-       }
-    }
-    if (((p.y-PENRADIUS) > BOXSIZE) && ((p.y+PENRADIUS) < tft.height())) {
-      tft.fillCircle(p.x, p.y, PENRADIUS, currentcolor);
-    }
-  }
-}
-

examples/tftpaint_shield/glcdfont.c

@@ -1,264 +0,0 @@
-
-#ifndef FONT5X7_H
-#define FONT5X7_H
-
-// standard ascii 5x7 font
-
-static unsigned char  font[]  = {
-        0x00, 0x00, 0x00, 0x00, 0x00,   
-	0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 	
-	0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 	
-	0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 
-	0x18, 0x3C, 0x7E, 0x3C, 0x18, 
-	0x1C, 0x57, 0x7D, 0x57, 0x1C, 
-	0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 
-	0x00, 0x18, 0x3C, 0x18, 0x00, 
-	0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 
-	0x00, 0x18, 0x24, 0x18, 0x00, 
-	0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 
-	0x30, 0x48, 0x3A, 0x06, 0x0E, 
-	0x26, 0x29, 0x79, 0x29, 0x26, 
-	0x40, 0x7F, 0x05, 0x05, 0x07, 
-	0x40, 0x7F, 0x05, 0x25, 0x3F, 
-	0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 
-	0x7F, 0x3E, 0x1C, 0x1C, 0x08, 
-	0x08, 0x1C, 0x1C, 0x3E, 0x7F, 
-	0x14, 0x22, 0x7F, 0x22, 0x14, 
-	0x5F, 0x5F, 0x00, 0x5F, 0x5F, 
-	0x06, 0x09, 0x7F, 0x01, 0x7F, 
-	0x00, 0x66, 0x89, 0x95, 0x6A, 
-	0x60, 0x60, 0x60, 0x60, 0x60, 
-	0x94, 0xA2, 0xFF, 0xA2, 0x94, 
-	0x08, 0x04, 0x7E, 0x04, 0x08, 
-	0x10, 0x20, 0x7E, 0x20, 0x10, 
-	0x08, 0x08, 0x2A, 0x1C, 0x08, 
-	0x08, 0x1C, 0x2A, 0x08, 0x08, 
-	0x1E, 0x10, 0x10, 0x10, 0x10, 
-	0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 
-	0x30, 0x38, 0x3E, 0x38, 0x30, 
-	0x06, 0x0E, 0x3E, 0x0E, 0x06, 
-	0x00, 0x00, 0x00, 0x00, 0x00, 
-	0x00, 0x00, 0x5F, 0x00, 0x00, 
-	0x00, 0x07, 0x00, 0x07, 0x00, 
-	0x14, 0x7F, 0x14, 0x7F, 0x14, 
-	0x24, 0x2A, 0x7F, 0x2A, 0x12, 
-	0x23, 0x13, 0x08, 0x64, 0x62, 
-	0x36, 0x49, 0x56, 0x20, 0x50, 
-	0x00, 0x08, 0x07, 0x03, 0x00, 
-	0x00, 0x1C, 0x22, 0x41, 0x00, 
-	0x00, 0x41, 0x22, 0x1C, 0x00, 
-	0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 
-	0x08, 0x08, 0x3E, 0x08, 0x08, 
-	0x00, 0x80, 0x70, 0x30, 0x00, 
-	0x08, 0x08, 0x08, 0x08, 0x08, 
-	0x00, 0x00, 0x60, 0x60, 0x00, 
-	0x20, 0x10, 0x08, 0x04, 0x02, 
-	0x3E, 0x51, 0x49, 0x45, 0x3E, 
-	0x00, 0x42, 0x7F, 0x40, 0x00, 
-	0x72, 0x49, 0x49, 0x49, 0x46, 
-	0x21, 0x41, 0x49, 0x4D, 0x33, 
-	0x18, 0x14, 0x12, 0x7F, 0x10, 
-	0x27, 0x45, 0x45, 0x45, 0x39, 
-	0x3C, 0x4A, 0x49, 0x49, 0x31, 
-	0x41, 0x21, 0x11, 0x09, 0x07, 
-	0x36, 0x49, 0x49, 0x49, 0x36, 
-	0x46, 0x49, 0x49, 0x29, 0x1E, 
-	0x00, 0x00, 0x14, 0x00, 0x00, 
-	0x00, 0x40, 0x34, 0x00, 0x00, 
-	0x00, 0x08, 0x14, 0x22, 0x41, 
-	0x14, 0x14, 0x14, 0x14, 0x14, 
-	0x00, 0x41, 0x22, 0x14, 0x08, 
-	0x02, 0x01, 0x59, 0x09, 0x06, 
-	0x3E, 0x41, 0x5D, 0x59, 0x4E, 
-	0x7C, 0x12, 0x11, 0x12, 0x7C, 
-	0x7F, 0x49, 0x49, 0x49, 0x36, 
-	0x3E, 0x41, 0x41, 0x41, 0x22, 
-	0x7F, 0x41, 0x41, 0x41, 0x3E, 
-	0x7F, 0x49, 0x49, 0x49, 0x41, 
-	0x7F, 0x09, 0x09, 0x09, 0x01, 
-	0x3E, 0x41, 0x41, 0x51, 0x73, 
-	0x7F, 0x08, 0x08, 0x08, 0x7F, 
-	0x00, 0x41, 0x7F, 0x41, 0x00, 
-	0x20, 0x40, 0x41, 0x3F, 0x01, 
-	0x7F, 0x08, 0x14, 0x22, 0x41, 
-	0x7F, 0x40, 0x40, 0x40, 0x40, 
-	0x7F, 0x02, 0x1C, 0x02, 0x7F, 
-	0x7F, 0x04, 0x08, 0x10, 0x7F, 
-	0x3E, 0x41, 0x41, 0x41, 0x3E, 
-	0x7F, 0x09, 0x09, 0x09, 0x06, 
-	0x3E, 0x41, 0x51, 0x21, 0x5E, 
-	0x7F, 0x09, 0x19, 0x29, 0x46, 
-	0x26, 0x49, 0x49, 0x49, 0x32, 
-	0x03, 0x01, 0x7F, 0x01, 0x03, 
-	0x3F, 0x40, 0x40, 0x40, 0x3F, 
-	0x1F, 0x20, 0x40, 0x20, 0x1F, 
-	0x3F, 0x40, 0x38, 0x40, 0x3F, 
-	0x63, 0x14, 0x08, 0x14, 0x63, 
-	0x03, 0x04, 0x78, 0x04, 0x03, 
-	0x61, 0x59, 0x49, 0x4D, 0x43, 
-	0x00, 0x7F, 0x41, 0x41, 0x41, 
-	0x02, 0x04, 0x08, 0x10, 0x20, 
-	0x00, 0x41, 0x41, 0x41, 0x7F, 
-	0x04, 0x02, 0x01, 0x02, 0x04, 
-	0x40, 0x40, 0x40, 0x40, 0x40, 
-	0x00, 0x03, 0x07, 0x08, 0x00, 
-	0x20, 0x54, 0x54, 0x78, 0x40, 
-	0x7F, 0x28, 0x44, 0x44, 0x38, 
-	0x38, 0x44, 0x44, 0x44, 0x28, 
-	0x38, 0x44, 0x44, 0x28, 0x7F, 
-	0x38, 0x54, 0x54, 0x54, 0x18, 
-	0x00, 0x08, 0x7E, 0x09, 0x02, 
-	0x18, 0xA4, 0xA4, 0x9C, 0x78, 
-	0x7F, 0x08, 0x04, 0x04, 0x78, 
-	0x00, 0x44, 0x7D, 0x40, 0x00, 
-	0x20, 0x40, 0x40, 0x3D, 0x00, 
-	0x7F, 0x10, 0x28, 0x44, 0x00, 
-	0x00, 0x41, 0x7F, 0x40, 0x00, 
-	0x7C, 0x04, 0x78, 0x04, 0x78, 
-	0x7C, 0x08, 0x04, 0x04, 0x78, 
-	0x38, 0x44, 0x44, 0x44, 0x38, 
-	0xFC, 0x18, 0x24, 0x24, 0x18, 
-	0x18, 0x24, 0x24, 0x18, 0xFC, 
-	0x7C, 0x08, 0x04, 0x04, 0x08, 
-	0x48, 0x54, 0x54, 0x54, 0x24, 
-	0x04, 0x04, 0x3F, 0x44, 0x24, 
-	0x3C, 0x40, 0x40, 0x20, 0x7C, 
-	0x1C, 0x20, 0x40, 0x20, 0x1C, 
-	0x3C, 0x40, 0x30, 0x40, 0x3C, 
-	0x44, 0x28, 0x10, 0x28, 0x44, 
-	0x4C, 0x90, 0x90, 0x90, 0x7C, 
-	0x44, 0x64, 0x54, 0x4C, 0x44, 
-	0x00, 0x08, 0x36, 0x41, 0x00, 
-	0x00, 0x00, 0x77, 0x00, 0x00, 
-	0x00, 0x41, 0x36, 0x08, 0x00, 
-	0x02, 0x01, 0x02, 0x04, 0x02, 
-	0x3C, 0x26, 0x23, 0x26, 0x3C, 
-	0x1E, 0xA1, 0xA1, 0x61, 0x12, 
-	0x3A, 0x40, 0x40, 0x20, 0x7A, 
-	0x38, 0x54, 0x54, 0x55, 0x59, 
-	0x21, 0x55, 0x55, 0x79, 0x41, 
-	0x21, 0x54, 0x54, 0x78, 0x41, 
-	0x21, 0x55, 0x54, 0x78, 0x40, 
-	0x20, 0x54, 0x55, 0x79, 0x40, 
-	0x0C, 0x1E, 0x52, 0x72, 0x12, 
-	0x39, 0x55, 0x55, 0x55, 0x59, 
-	0x39, 0x54, 0x54, 0x54, 0x59, 
-	0x39, 0x55, 0x54, 0x54, 0x58, 
-	0x00, 0x00, 0x45, 0x7C, 0x41, 
-	0x00, 0x02, 0x45, 0x7D, 0x42, 
-	0x00, 0x01, 0x45, 0x7C, 0x40, 
-	0xF0, 0x29, 0x24, 0x29, 0xF0, 
-	0xF0, 0x28, 0x25, 0x28, 0xF0, 
-	0x7C, 0x54, 0x55, 0x45, 0x00, 
-	0x20, 0x54, 0x54, 0x7C, 0x54, 
-	0x7C, 0x0A, 0x09, 0x7F, 0x49, 
-	0x32, 0x49, 0x49, 0x49, 0x32, 
-	0x32, 0x48, 0x48, 0x48, 0x32, 
-	0x32, 0x4A, 0x48, 0x48, 0x30, 
-	0x3A, 0x41, 0x41, 0x21, 0x7A, 
-	0x3A, 0x42, 0x40, 0x20, 0x78, 
-	0x00, 0x9D, 0xA0, 0xA0, 0x7D, 
-	0x39, 0x44, 0x44, 0x44, 0x39, 
-	0x3D, 0x40, 0x40, 0x40, 0x3D, 
-	0x3C, 0x24, 0xFF, 0x24, 0x24, 
-	0x48, 0x7E, 0x49, 0x43, 0x66, 
-	0x2B, 0x2F, 0xFC, 0x2F, 0x2B, 
-	0xFF, 0x09, 0x29, 0xF6, 0x20, 
-	0xC0, 0x88, 0x7E, 0x09, 0x03, 
-	0x20, 0x54, 0x54, 0x79, 0x41, 
-	0x00, 0x00, 0x44, 0x7D, 0x41, 
-	0x30, 0x48, 0x48, 0x4A, 0x32, 
-	0x38, 0x40, 0x40, 0x22, 0x7A, 
-	0x00, 0x7A, 0x0A, 0x0A, 0x72, 
-	0x7D, 0x0D, 0x19, 0x31, 0x7D, 
-	0x26, 0x29, 0x29, 0x2F, 0x28, 
-	0x26, 0x29, 0x29, 0x29, 0x26, 
-	0x30, 0x48, 0x4D, 0x40, 0x20, 
-	0x38, 0x08, 0x08, 0x08, 0x08, 
-	0x08, 0x08, 0x08, 0x08, 0x38, 
-	0x2F, 0x10, 0xC8, 0xAC, 0xBA, 
-	0x2F, 0x10, 0x28, 0x34, 0xFA, 
-	0x00, 0x00, 0x7B, 0x00, 0x00, 
-	0x08, 0x14, 0x2A, 0x14, 0x22, 
-	0x22, 0x14, 0x2A, 0x14, 0x08, 
-	0xAA, 0x00, 0x55, 0x00, 0xAA, 
-	0xAA, 0x55, 0xAA, 0x55, 0xAA, 
-	0x00, 0x00, 0x00, 0xFF, 0x00, 
-	0x10, 0x10, 0x10, 0xFF, 0x00, 
-	0x14, 0x14, 0x14, 0xFF, 0x00, 
-	0x10, 0x10, 0xFF, 0x00, 0xFF, 
-	0x10, 0x10, 0xF0, 0x10, 0xF0, 
-	0x14, 0x14, 0x14, 0xFC, 0x00, 
-	0x14, 0x14, 0xF7, 0x00, 0xFF, 
-	0x00, 0x00, 0xFF, 0x00, 0xFF, 
-	0x14, 0x14, 0xF4, 0x04, 0xFC, 
-	0x14, 0x14, 0x17, 0x10, 0x1F, 
-	0x10, 0x10, 0x1F, 0x10, 0x1F, 
-	0x14, 0x14, 0x14, 0x1F, 0x00, 
-	0x10, 0x10, 0x10, 0xF0, 0x00, 
-	0x00, 0x00, 0x00, 0x1F, 0x10, 
-	0x10, 0x10, 0x10, 0x1F, 0x10, 
-	0x10, 0x10, 0x10, 0xF0, 0x10, 
-	0x00, 0x00, 0x00, 0xFF, 0x10, 
-	0x10, 0x10, 0x10, 0x10, 0x10, 
-	0x10, 0x10, 0x10, 0xFF, 0x10, 
-	0x00, 0x00, 0x00, 0xFF, 0x14, 
-	0x00, 0x00, 0xFF, 0x00, 0xFF, 
-	0x00, 0x00, 0x1F, 0x10, 0x17, 
-	0x00, 0x00, 0xFC, 0x04, 0xF4, 
-	0x14, 0x14, 0x17, 0x10, 0x17, 
-	0x14, 0x14, 0xF4, 0x04, 0xF4, 
-	0x00, 0x00, 0xFF, 0x00, 0xF7, 
-	0x14, 0x14, 0x14, 0x14, 0x14, 
-	0x14, 0x14, 0xF7, 0x00, 0xF7, 
-	0x14, 0x14, 0x14, 0x17, 0x14, 
-	0x10, 0x10, 0x1F, 0x10, 0x1F, 
-	0x14, 0x14, 0x14, 0xF4, 0x14, 
-	0x10, 0x10, 0xF0, 0x10, 0xF0, 
-	0x00, 0x00, 0x1F, 0x10, 0x1F, 
-	0x00, 0x00, 0x00, 0x1F, 0x14, 
-	0x00, 0x00, 0x00, 0xFC, 0x14, 
-	0x00, 0x00, 0xF0, 0x10, 0xF0, 
-	0x10, 0x10, 0xFF, 0x10, 0xFF, 
-	0x14, 0x14, 0x14, 0xFF, 0x14, 
-	0x10, 0x10, 0x10, 0x1F, 0x00, 
-	0x00, 0x00, 0x00, 0xF0, 0x10, 
-	0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 
-	0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 
-	0xFF, 0xFF, 0xFF, 0x00, 0x00, 
-	0x00, 0x00, 0x00, 0xFF, 0xFF, 
-	0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 
-	0x38, 0x44, 0x44, 0x38, 0x44, 
-	0x7C, 0x2A, 0x2A, 0x3E, 0x14, 
-	0x7E, 0x02, 0x02, 0x06, 0x06, 
-	0x02, 0x7E, 0x02, 0x7E, 0x02, 
-	0x63, 0x55, 0x49, 0x41, 0x63, 
-	0x38, 0x44, 0x44, 0x3C, 0x04, 
-	0x40, 0x7E, 0x20, 0x1E, 0x20, 
-	0x06, 0x02, 0x7E, 0x02, 0x02, 
-	0x99, 0xA5, 0xE7, 0xA5, 0x99, 
-	0x1C, 0x2A, 0x49, 0x2A, 0x1C, 
-	0x4C, 0x72, 0x01, 0x72, 0x4C, 
-	0x30, 0x4A, 0x4D, 0x4D, 0x30, 
-	0x30, 0x48, 0x78, 0x48, 0x30, 
-	0xBC, 0x62, 0x5A, 0x46, 0x3D, 
-	0x3E, 0x49, 0x49, 0x49, 0x00, 
-	0x7E, 0x01, 0x01, 0x01, 0x7E, 
-	0x2A, 0x2A, 0x2A, 0x2A, 0x2A, 
-	0x44, 0x44, 0x5F, 0x44, 0x44, 
-	0x40, 0x51, 0x4A, 0x44, 0x40, 
-	0x40, 0x44, 0x4A, 0x51, 0x40, 
-	0x00, 0x00, 0xFF, 0x01, 0x03, 
-	0xE0, 0x80, 0xFF, 0x00, 0x00, 
-	0x08, 0x08, 0x6B, 0x6B, 0x08,
-	0x36, 0x12, 0x36, 0x24, 0x36, 
-	0x06, 0x0F, 0x09, 0x0F, 0x06, 
-	0x00, 0x00, 0x18, 0x18, 0x00, 
-	0x00, 0x00, 0x10, 0x10, 0x00, 
-	0x30, 0x40, 0xFF, 0x01, 0x01, 
-	0x00, 0x1F, 0x01, 0x01, 0x1E, 
-	0x00, 0x19, 0x1D, 0x17, 0x12, 
-	0x00, 0x3C, 0x3C, 0x3C, 0x3C, 
-	0x00, 0x00, 0x00, 0x00, 0x00, 
-};
-#endif

examples/tftpaint_shield/tftpaint_shield.ino

@@ -1,175 +0,0 @@
-// Paint example specifically for the TFTLCD Arduino shield.
-// If using the breakout board, use the tftpaint.pde sketch instead!
-
-#include <Adafruit_GFX.h>    // Core graphics library
-#include <Adafruit_TFTLCD.h> // Hardware-specific library
-#include <TouchScreen.h>
-
-#if defined(__SAM3X8E__)
-    #undef __FlashStringHelper::F(string_literal)
-    #define F(string_literal) string_literal
-#endif
-
-#ifndef USE_ADAFRUIT_SHIELD_PINOUT 
- #error "This sketch is intended for use with the TFT LCD Shield. Make sure that USE_ADAFRUIT_SHIELD_PINOUT is #defined in the Adafruit_TFTLCD.h library file."
-#endif
-
-// These are the pins for the shield!
-#define YP A1  // must be an analog pin, use "An" notation!
-#define XM A2  // must be an analog pin, use "An" notation!
-#define YM 7   // can be a digital pin
-#define XP 6   // can be a digital pin
-
-#ifdef __SAM3X8E__
-  #define TS_MINX 125
-  #define TS_MINY 170
-  #define TS_MAXX 880
-  #define TS_MAXY 940
-#else
-  #define TS_MINX  150
-  #define TS_MINY  120
-  #define TS_MAXX  920
-  #define TS_MAXY  940
-#endif
-
-// For better pressure precision, we need to know the resistance
-// between X+ and X- Use any multimeter to read it
-// For the one we're using, its 300 ohms across the X plate
-TouchScreen ts = TouchScreen(XP, YP, XM, YM, 300);
-
-#define LCD_CS A3
-#define LCD_CD A2
-#define LCD_WR A1
-#define LCD_RD A0
-
-// Assign human-readable names to some common 16-bit color values:
-#define	BLACK   0x0000
-#define	BLUE    0x001F
-#define	RED     0xF800
-#define	GREEN   0x07E0
-#define CYAN    0x07FF
-#define MAGENTA 0xF81F
-#define YELLOW  0xFFE0
-#define WHITE   0xFFFF
-
-
-Adafruit_TFTLCD tft;
-
-#define BOXSIZE   40
-#define PENRADIUS  4
-int oldcolor, currentcolor;
-
-void setup(void) {
-  Serial.begin(9600);
-  Serial.println(F("Paint!"));
-
-  tft.reset();
-
-  uint16_t identifier = tft.readID();
-
-  if(identifier == 0x9325) {
-    Serial.println(F("Found ILI9325 LCD driver"));
-  } else if(identifier == 0x9328) {
-    Serial.println(F("Found ILI9328 LCD driver"));
-  } else if(identifier == 0x7575) {
-    Serial.println(F("Found HX8347G LCD driver"));
-  } else {
-    Serial.print(F("Unknown LCD driver chip: "));
-    Serial.println(identifier, HEX);
-    return;
-  }
-
-  tft.begin(identifier);
-
-  tft.fillScreen(BLACK);
-
-  tft.fillRect(0, 0, BOXSIZE, BOXSIZE, RED);
-  tft.fillRect(BOXSIZE, 0, BOXSIZE, BOXSIZE, YELLOW);
-  tft.fillRect(BOXSIZE*2, 0, BOXSIZE, BOXSIZE, GREEN);
-  tft.fillRect(BOXSIZE*3, 0, BOXSIZE, BOXSIZE, CYAN);
-  tft.fillRect(BOXSIZE*4, 0, BOXSIZE, BOXSIZE, BLUE);
-  tft.fillRect(BOXSIZE*5, 0, BOXSIZE, BOXSIZE, MAGENTA);
-  // tft.fillRect(BOXSIZE*6, 0, BOXSIZE, BOXSIZE, WHITE);
- 
-  tft.drawRect(0, 0, BOXSIZE, BOXSIZE, WHITE);
-  currentcolor = RED;
- 
-  pinMode(13, OUTPUT);
-}
-
-#define MINPRESSURE 10
-#define MAXPRESSURE 1000
-
-void loop()
-{
-  digitalWrite(13, HIGH);
-  Point p = ts.getPoint();
-  digitalWrite(13, LOW);
-
-  // if sharing pins, you'll need to fix the directions of the touchscreen pins
-  //pinMode(XP, OUTPUT);
-  pinMode(XM, OUTPUT);
-  pinMode(YP, OUTPUT);
-  //pinMode(YM, OUTPUT);
-
-  // we have some minimum pressure we consider 'valid'
-  // pressure of 0 means no pressing!
-
-  if (p.z > MINPRESSURE && p.z < MAXPRESSURE) {
-    /*
-    Serial.print("X = "); Serial.print(p.x);
-    Serial.print("\tY = "); Serial.print(p.y);
-    Serial.print("\tPressure = "); Serial.println(p.z);
-    */
-    
-    if (p.y < (TS_MINY-5)) {
-      Serial.println("erase");
-      // press the bottom of the screen to erase 
-      tft.fillRect(0, BOXSIZE, tft.width(), tft.height()-BOXSIZE, BLACK);
-    }
-    // scale from 0->1023 to tft.width
-    p.x = map(p.x, TS_MINX, TS_MAXX, tft.width(), 0);
-    p.y = map(p.y, TS_MINY, TS_MAXY, tft.height(), 0);
-    /*
-    Serial.print("("); Serial.print(p.x);
-    Serial.print(", "); Serial.print(p.y);
-    Serial.println(")");
-    */
-    if (p.y < BOXSIZE) {
-       oldcolor = currentcolor;
-
-       if (p.x < BOXSIZE) { 
-         currentcolor = RED; 
-         tft.drawRect(0, 0, BOXSIZE, BOXSIZE, WHITE);
-       } else if (p.x < BOXSIZE*2) {
-         currentcolor = YELLOW;
-         tft.drawRect(BOXSIZE, 0, BOXSIZE, BOXSIZE, WHITE);
-       } else if (p.x < BOXSIZE*3) {
-         currentcolor = GREEN;
-         tft.drawRect(BOXSIZE*2, 0, BOXSIZE, BOXSIZE, WHITE);
-       } else if (p.x < BOXSIZE*4) {
-         currentcolor = CYAN;
-         tft.drawRect(BOXSIZE*3, 0, BOXSIZE, BOXSIZE, WHITE);
-       } else if (p.x < BOXSIZE*5) {
-         currentcolor = BLUE;
-         tft.drawRect(BOXSIZE*4, 0, BOXSIZE, BOXSIZE, WHITE);
-       } else if (p.x < BOXSIZE*6) {
-         currentcolor = MAGENTA;
-         tft.drawRect(BOXSIZE*5, 0, BOXSIZE, BOXSIZE, WHITE);
-       }
-
-       if (oldcolor != currentcolor) {
-          if (oldcolor == RED) tft.fillRect(0, 0, BOXSIZE, BOXSIZE, RED);
-          if (oldcolor == YELLOW) tft.fillRect(BOXSIZE, 0, BOXSIZE, BOXSIZE, YELLOW);
-          if (oldcolor == GREEN) tft.fillRect(BOXSIZE*2, 0, BOXSIZE, BOXSIZE, GREEN);
-          if (oldcolor == CYAN) tft.fillRect(BOXSIZE*3, 0, BOXSIZE, BOXSIZE, CYAN);
-          if (oldcolor == BLUE) tft.fillRect(BOXSIZE*4, 0, BOXSIZE, BOXSIZE, BLUE);
-          if (oldcolor == MAGENTA) tft.fillRect(BOXSIZE*5, 0, BOXSIZE, BOXSIZE, MAGENTA);
-       }
-    }
-    if (((p.y-PENRADIUS) > BOXSIZE) && ((p.y+PENRADIUS) < tft.height())) {
-      tft.fillCircle(p.x, p.y, PENRADIUS, currentcolor);
-    }
-  }
-}
-

examples/wobble/wobble/wobble.ino

@@ -0,0 +1,105 @@
+#include <SD.h>
+#include <Adafruit_GFX.h>    // Core graphics library
+#include <Adafruit_TFTLCD.h> // Hardware-specific library
+
+#define LCD_CS A3 // Chip Select (see notes above)
+#define LCD_CD A2 // Command/Data
+#define LCD_RD A0 // LCD Read strobe
+#define LCD_WR  4 // LCD Write strobe (see notes above)
+
+#define LCD_RESET A4 // Alternately just connect to Arduino's reset pin
+
+#define DMA_SELECT A1 // Hi/lo chooses DMA vs non-DMA effect
+
+Adafruit_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);
+
+#define DMALINES 16
+// DMA buffer is 320 pixels * DMALINES * 2 bytes/pixel * 2 buffers
+uint8_t dmabuf[320 * DMALINES * 2 * 2];
+// Pixel buffer is slightly wider than screen, for X-scrolling
+uint16_t pixels[320 + 64];
+uint32_t startTime;
+
+void setup()
+{
+  Serial.begin(9600);
+  while(!Serial);
+
+  pinMode(DMA_SELECT, INPUT_PULLUP);
+
+  // Initialize pixel buffer with alternating red and white bands,
+  // 32 pixels wide.  0x00F8 is 16-bit red (0xF800) endian-swapped
+  // so bytes can be copied directly to screen.
+  for(int i=0; i<320+64; i++)
+    pixels[i] = (i & 32) ? 0x00F8 : 0xFFFF;
+
+  tft.reset();
+
+  uint16_t identifier = tft.readID();
+
+  // SEE NOTES ABOVE - this is necessary IF using the
+  // hard-wired CS (and no inverter) option.
+  identifier = 0x9341;
+
+  if(identifier == 0x9325) {
+    Serial.println(F("Found ILI9325 LCD driver"));
+  } else if(identifier == 0x9328) {
+    Serial.println(F("Found ILI9328 LCD driver"));
+  } else if(identifier == 0x7575) {
+    Serial.println(F("Found HX8347G LCD driver"));
+  } else if(identifier == 0x9341) {
+    Serial.println(F("Found ILI9341 LCD driver"));
+  } else if(identifier == 0x8357) {
+    Serial.println(F("Found HX8357D LCD driver"));
+  } else {
+    Serial.print(F("Unknown LCD driver chip: "));
+    Serial.println(identifier, HEX);
+    return;
+  }
+
+  tft.begin(identifier);
+  tft.setRotation(1);
+  tft.fillScreen(0);
+  startTime = millis();
+}
+
+int lineNum;
+int frame = 0;
+
+// pushColorsDMA() callback function -- fills DMALINES scanlines with
+// data from pixels[] array.
+void myCallback(uint8_t *dest, uint16_t len) {
+  for(int i=0; i<DMALINES; i++) {
+    // Wave up to 64 pixels horizontally (extra width in pixels[] array)
+    int offset = (int)((sin((float)(lineNum + frame) / 40.0) + 1.0) * 31.5);
+    // Change offset every 32 lines for checkerboard effect
+    if((lineNum + frame/8) & 32) offset = (offset + 32) % 63;
+    memcpy(dest, &pixels[offset], len / DMALINES);
+    lineNum++;
+    dest += 320 * 2; // Offset to next scanline (2 bytes/pixel)
+  }
+}
+
+void loop() {
+  tft.setAddrWindow(0, 0, tft.width() - 1, tft.height() - 1);
+  lineNum = 0;
+  if(digitalRead(DMA_SELECT)) {
+    tft.pushColorsDMA(tft.width() * tft.height() * 2, dmabuf, tft.width() * DMALINES * 2, myCallback);
+  } else {
+    bool first = true;
+    while(lineNum < tft.height()) {
+      // Fill the DMA buffer, but don't issue it
+      myCallback(dmabuf, tft.width() * DMALINES * 2);
+      // Then send it using non-DMA function:
+      tft.pushColors((uint16_t *)dmabuf, tft.width() * DMALINES, first);
+      first = false;
+    }
+  }
+  frame++;
+  uint32_t elapsed = (millis() - startTime) / 1000;
+  if(elapsed > 0) {
+    Serial.print(frame / elapsed);
+    Serial.println(" fps");
+  }
+}
+

pin_magic.h

@@ -55,19 +55,7 @@
 // equivalent to two NOPs each, final NOP burns the 7th cycle, and the
 // last line is a radioactive mutant emoticon.
 #define DELAY7        \
-  asm volatile(      \
-    "rjmp .+0" "\n\t" \
-    "rjmp .+0" "\n\t" \
-    "rjmp .+0" "\n\t" \
-    "nop"      "\n"   \
-    ::);
-
-// Xmega runs at 32 MHz instead of 16, so 13 cycle delays are needed
-#define DELAY13       \
-  asm volatile(      \
-    "rjmp .+0" "\n\t" \
-    "rjmp .+0" "\n\t" \
-    "rjmp .+0" "\n\t" \
+  asm volatile(       \
     "rjmp .+0" "\n\t" \
     "rjmp .+0" "\n\t" \
     "rjmp .+0" "\n\t" \
@@ -82,10 +70,10 @@
 
   // LCD control lines:
   // RD (read), WR (write), CD (command/data), CS (chip select)
-  #define RD_PORT PORTC				/*pin A0 */
-  #define WR_PORT PORTC				/*pin A1 */
-  #define CD_PORT PORTC				/*pin A2 */
-  #define CS_PORT PORTC				/*pin A3 */
+  #define RD_PORT PORTC     /*pin A0 */
+  #define WR_PORT PORTC     /*pin A1 */
+  #define CD_PORT PORTC     /*pin A2 */
+  #define CS_PORT PORTC     /*pin A3 */
   #define RD_MASK B00000001
   #define WR_MASK B00000010
   #define CD_MASK B00000100
@@ -197,7 +185,6 @@
   #define setReadDir        setReadDirInline
   #define writeRegister8    writeRegister8inline
   #define writeRegister16   writeRegister16inline
-  #define writeRegister32   writeRegister32inline
   #define writeRegisterPair writeRegisterPairInline
 
 #elif defined(__AVR_ATmega32U4__)
@@ -268,48 +255,16 @@
   // program to compile.
   #define write8 write8inline
 
-#elif defined(VARIANT_ADAX256A3BU)
-
-	#define write8inline(d)		do { PORTC_OUT = d; WR_STROBE; } while (0)
-	#define read8inline(result)	do { RD_ACTIVE; DELAY13; result = PORTC_IN; RD_IDLE; } while (0)
-	#define setWriteDirInline()	do { PORTC_DIR = 0xFF; } while (0)
-	#define setReadDirInline()	do { PORTC_DIR = 0x00; } while (0)
-
-	#define write8            write8inline
-	#define read8             read8inline
-	#define setWriteDir       setWriteDirInline
-	#define setReadDir        setReadDirInline
-	#define writeRegister8    writeRegister8inline
-	#define writeRegister16   writeRegister16inline
-	#define writeRegister32   writeRegister32inline
-	#define writeRegisterPair writeRegisterPairInline
-
-#elif defined(VARIANT_MICROTOUCHX)
-
-	#define write8inline(d)		do { PORTA_OUT = d; WR_STROBE; } while (0)
-	#define read8inline(result)	do { RD_ACTIVE; DELAY13; result = PORTA_IN; RD_IDLE; } while (0)
-	#define setWriteDirInline()	do { PORTA_DIR = 0xFF; } while (0)
-	#define setReadDirInline()	do { PORTA_DIR = 0x00; } while (0)
-
-	#define write8            write8inline
-	#define read8             read8inline
-	#define setWriteDir       setWriteDirInline
-	#define setReadDir        setReadDirInline
-	#define writeRegister8    writeRegister8inline
-	#define writeRegister16   writeRegister16inline
-	#define writeRegister32   writeRegister32inline
-	#define writeRegisterPair writeRegisterPairInline
-
 #elif defined(__SAM3X8E__)
 
 // Arduino Due
 
  #ifdef USE_ADAFRUIT_SHIELD_PINOUT
 
-  #define RD_PORT PIOA				/*pin A0 */	
-  #define WR_PORT PIOA				/*pin A1 */
-  #define CD_PORT PIOA				/*pin A2 */
-  #define CS_PORT PIOA				/*pin A3 */
+  #define RD_PORT PIOA       /*pin A0 */
+  #define WR_PORT PIOA       /*pin A1 */
+  #define CD_PORT PIOA       /*pin A2 */
+  #define CS_PORT PIOA       /*pin A3 */
   #define RD_MASK 0x00010000
   #define WR_MASK 0x01000000
   #define CD_MASK 0x00800000
@@ -339,8 +294,8 @@
    PIOB->PIO_MDDR |=  0x08000000; /*PIOB->PIO_SODR =  0x08000000;*/ PIOB->PIO_OER |=  0x08000000; PIOB->PIO_PER |=  0x08000000; }
 
   #define setReadDirInline() { \
-	  pmc_enable_periph_clk( ID_PIOD ) ;	  pmc_enable_periph_clk( ID_PIOC ) ;	  pmc_enable_periph_clk( ID_PIOB ) ; \
-   PIOD->PIO_PUDR |=  0x00000080; PIOD->PIO_IFDR |=  0x00000080; PIOD->PIO_ODR |=  0x00000080; PIOD->PIO_PER |=  0x00000080; \
+   pmc_enable_periph_clk(ID_PIOD); pmc_enable_periph_clk(ID_PIOC); pmc_enable_periph_clk(ID_PIOB) ; \
+   PI OD->PIO_PUDR |=  0x00000080; PIOD->PIO_IFDR |=  0x00000080; PIOD->PIO_ODR |=  0x00000080; PIOD->PIO_PER |=  0x00000080; \
    PIOC->PIO_PUDR |=  0x25E00000; PIOC->PIO_IFDR |=  0x25E00000; PIOC->PIO_ODR |=  0x25E00000; PIOC->PIO_PER |=  0x25E00000; \
    PIOB->PIO_PUDR |=  0x08000000; PIOB->PIO_IFDR |=  0x08000000; PIOB->PIO_ODR |=  0x08000000; PIOB->PIO_PER |=  0x08000000; }
 
@@ -356,39 +311,78 @@
    #define CS_ACTIVE  CS_PORT->PIO_CODR |= CS_MASK
    #define CS_IDLE    CS_PORT->PIO_SODR |= CS_MASK
 
-
 #else // Due w/Breakout board
 
-    #define write8inline(d) { \
-		PIO_Set(PIOC, (((d) & 0xFF)<<1)); \
-		PIO_Clear(PIOC, (((~d) & 0xFF)<<1)); \
-		WR_STROBE; }
+  #define write8inline(d) {              \
+    PIO_Set(PIOC, (((d) & 0xFF)<<1));    \
+    PIO_Clear(PIOC, (((~d) & 0xFF)<<1)); \
+    WR_STROBE; }
 
-    #define read8inline(result) { \
-		RD_ACTIVE;   \
-		delayMicroseconds(1);      \
-		result = ((PIOC->PIO_PDSR & 0x1FE) >> 1); \
-		RD_IDLE;}
+  #define read8inline(result) {               \
+    RD_ACTIVE;                                \
+    delayMicroseconds(1);                     \
+    result = ((PIOC->PIO_PDSR & 0x1FE) >> 1); \
+    RD_IDLE;}
 
-    #define setWriteDirInline() { \
-	    PIOC->PIO_MDDR |=  0x000001FE; /*PIOC->PIO_SODR |=  0x000001FE;*/ PIOC->PIO_OER |=  0x000001FE; PIOC->PIO_PER |=  0x000001FE; }
+  #define setWriteDirInline() {   \
+    PIOC->PIO_MDDR |= 0x000001FE; \
+    PIOC->PIO_OER  |= 0x000001FE; \
+    PIOC->PIO_PER  |= 0x000001FE; }
 
-    #define setReadDirInline() { \
-		pmc_enable_periph_clk( ID_PIOC ) ; \
-		PIOC->PIO_PUDR |=  0x000001FE; PIOC->PIO_IFDR |=  0x000001FE; PIOC->PIO_ODR |=  0x000001FE; PIOC->PIO_PER |=  0x000001FE; }
+  #define setReadDirInline() {         \
+    pmc_enable_periph_clk( ID_PIOC ) ; \
+    PIOC->PIO_PUDR |= 0x000001FE;      \
+    PIOC->PIO_IFDR |= 0x000001FE;      \
+    PIOC->PIO_ODR  |= 0x000001FE;      \
+    PIOC->PIO_PER  |= 0x000001FE; }
 
-    // When using the TFT breakout board, control pins are configurable.
-    #define RD_ACTIVE	rdPort->PIO_CODR |= rdPinSet		//PIO_Clear(rdPort, rdPinSet)
-    #define RD_IDLE		rdPort->PIO_SODR |= rdPinSet		//PIO_Set(rdPort, rdPinSet)	
-    #define WR_ACTIVE	wrPort->PIO_CODR |= wrPinSet		//PIO_Clear(wrPort, wrPinSet)
-    #define WR_IDLE		wrPort->PIO_SODR |= wrPinSet		//PIO_Set(wrPort, wrPinSet)
-    #define CD_COMMAND	cdPort->PIO_CODR |= cdPinSet		//PIO_Clear(cdPort, cdPinSet)
-    #define CD_DATA		cdPort->PIO_SODR |= cdPinSet		//PIO_Set(cdPort, cdPinSet)
-    #define CS_ACTIVE	csPort->PIO_CODR |= csPinSet		//PIO_Clear(csPort, csPinSet)
-    #define CS_IDLE		csPort->PIO_SODR |= csPinSet		//PIO_Set(csPort, csPinSet)
+  // When using the TFT breakout board, control pins are configurable.
+  #define RD_ACTIVE  rdPort->PIO_CODR |= rdPinSet //PIO_Clear(rdPort, rdPinSet)
+  #define RD_IDLE    rdPort->PIO_SODR |= rdPinSet //PIO_Set(rdPort, rdPinSet)
+  #define WR_ACTIVE  wrPort->PIO_CODR |= wrPinSet //PIO_Clear(wrPort, wrPinSet)
+  #define WR_IDLE    wrPort->PIO_SODR |= wrPinSet //PIO_Set(wrPort, wrPinSet)
+  #define CD_COMMAND cdPort->PIO_CODR |= cdPinSet //PIO_Clear(cdPort, cdPinSet)
+  #define CD_DATA    cdPort->PIO_SODR |= cdPinSet //PIO_Set(cdPort, cdPinSet)
+  #define CS_ACTIVE  csPort->PIO_CODR |= csPinSet //PIO_Clear(csPort, csPinSet)
+  #define CS_IDLE    csPort->PIO_SODR |= csPinSet //PIO_Set(csPort, csPinSet)
 
  #endif
 
+#elif defined(__SAMD51__) // Metro / Feather / ItsyBitsy M4
+
+ #ifdef USE_ADAFRUIT_SHIELD_PINOUT
+
+  // M4 w/shield: TBD
+
+ #else // M4 w/breakout
+
+  #define write8inline(d) { \
+    *writePort = d;         \
+    WR_STROBE; }
+
+  #define read8inline(result) { \
+    RD_ACTIVE;                  \
+    delayMicroseconds(1);       \
+    result = *readPort;         \
+    RD_IDLE; }
+
+  #define setWriteDirInline() { *dirSet = 0xFF; }
+  #define setReadDirInline()  { *dirClr = 0xFF; }
+
+  #define RD_ACTIVE  *rdPortClr = rdPinMask
+  #define RD_IDLE    *rdPortSet = rdPinMask
+/*
+  #define WR_ACTIVE  *wrPortClr = wrPinMask
+  #define WR_IDLE    *wrPortSet = wrPinMask
+*/
+  #define WR_ACTIVE  *wrPortSet = wrPinMask
+  #define WR_IDLE    *wrPortClr = wrPinMask
+  #define CD_COMMAND *cdPortClr = cdPinMask
+  #define CD_DATA    *cdPortSet = cdPinMask
+  #define CS_ACTIVE  *csPortClr = csPinMask
+  #define CS_IDLE    *csPortSet = csPinMask
+
+ #endif
 
 #else
 
@@ -396,7 +390,7 @@
 
 #endif
 
-#if !defined(__SAM3X8E__)
+#if defined(__AVR__)
 // Stuff common to all Arduino AVR board types:
 
 #ifdef USE_ADAFRUIT_SHIELD_PINOUT
@@ -413,17 +407,6 @@
  #define CS_ACTIVE  CS_PORT &= ~CS_MASK
  #define CS_IDLE    CS_PORT |=  CS_MASK
 
-#elif defined(CORE_ADAX) || defined(CORE_MICROTOUCHX)
-
- #define RD_ACTIVE  ((PORT_t*)rdPort)->OUTCLR = rdPinSet
- #define RD_IDLE    ((PORT_t*)rdPort)->OUTSET = rdPinSet
- #define WR_ACTIVE  ((PORT_t*)wrPort)->OUTCLR = wrPinSet
- #define WR_IDLE    ((PORT_t*)wrPort)->OUTSET = wrPinSet
- #define CD_COMMAND ((PORT_t*)cdPort)->OUTCLR = cdPinSet
- #define CD_DATA    ((PORT_t*)cdPort)->OUTSET = cdPinSet
- #define CS_ACTIVE  ((PORT_t*)csPort)->OUTCLR = csPinSet
- #define CS_IDLE    ((PORT_t*)csPort)->OUTSET = csPinSet
-
 #else // Breakout board
 
  // When using the TFT breakout board, control pins are configurable.
@@ -435,40 +418,31 @@
  #define CD_DATA    *cdPort |=  cdPinSet
  #define CS_ACTIVE  *csPort &=  csPinUnset
  #define CS_IDLE    *csPort |=  csPinSet
+
 #endif
 #endif
 
 // Data write strobe, ~2 instructions and always inline
-#define WR_STROBE do { WR_ACTIVE; WR_IDLE; } while (0)
+#define WR_STROBE { WR_ACTIVE; WR_IDLE; }
 
 // These higher-level operations are usually functionalized,
 // except on Mega where's there's gobs and gobs of program space.
 
 // Set value of TFT register: 8-bit address, 8-bit value
-#define writeRegister8inline(a, d) do { \
-  CD_COMMAND; write8(a); CD_DATA; write8(d); } while (0)
+#define writeRegister8inline(a, d) { \
+  CD_COMMAND; write8(a); CD_DATA; write8(d); }
 
 // Set value of TFT register: 16-bit address, 16-bit value
 // See notes at top about macro expansion, hence hi & lo temp vars
-#define writeRegister16inline(a, d) do { \
+#define writeRegister16inline(a, d) { \
   uint8_t hi, lo; \
   hi = (a) >> 8; lo = (a); CD_COMMAND; write8(hi); write8(lo); \
-  hi = (d) >> 8; lo = (d); CD_DATA   ; write8(hi); write8(lo); } while (0)
-
-// Set value of TFT register: 8-bit address, 32-bit value
-// only used for ID_9341
-// See notes at top about macro expansion, hence hi & lo temp vars
-#define writeRegister32inline(a, d) do { \
-  CS_ACTIVE; CD_COMMAND;\
-  write8(a);\
-  CD_DATA;\
-  write8(d >> 24); write8(d >> 16); write8(d >> 8); write8(d); \
-  CS_IDLE; } while (0)
+  hi = (d) >> 8; lo = (d); CD_DATA   ; write8(hi); write8(lo); }
 
 // Set value of 2 TFT registers: Two 8-bit addresses (hi & lo), 16-bit value
-#define writeRegisterPairInline(aH, aL, d) do { \
+#define writeRegisterPairInline(aH, aL, d) { \
   uint8_t hi = (d) >> 8, lo = (d); \
   CD_COMMAND; write8(aH); CD_DATA; write8(hi); \
-  CD_COMMAND; write8(aL); CD_DATA; write8(lo); } while(0)
+  CD_COMMAND; write8(aL); CD_DATA; write8(lo); }
 
 #endif // _pin_magic_

registers.h

@@ -0,0 +1,172 @@
+// Register names from Peter Barrett's Microtouch code
+#define ILI932X_START_OSC          0x00
+#define ILI932X_DRIV_OUT_CTRL      0x01
+#define ILI932X_DRIV_WAV_CTRL      0x02
+#define ILI932X_ENTRY_MOD          0x03
+#define ILI932X_RESIZE_CTRL        0x04
+#define ILI932X_DISP_CTRL1         0x07
+#define ILI932X_DISP_CTRL2         0x08
+#define ILI932X_DISP_CTRL3         0x09
+#define ILI932X_DISP_CTRL4         0x0A
+#define ILI932X_RGB_DISP_IF_CTRL1  0x0C
+#define ILI932X_FRM_MARKER_POS     0x0D
+#define ILI932X_RGB_DISP_IF_CTRL2  0x0F
+#define ILI932X_POW_CTRL1          0x10
+#define ILI932X_POW_CTRL2          0x11
+#define ILI932X_POW_CTRL3          0x12
+#define ILI932X_POW_CTRL4          0x13
+#define ILI932X_GRAM_HOR_AD        0x20
+#define ILI932X_GRAM_VER_AD        0x21
+#define ILI932X_RW_GRAM            0x22
+#define ILI932X_POW_CTRL7          0x29
+#define ILI932X_FRM_RATE_COL_CTRL  0x2B
+#define ILI932X_GAMMA_CTRL1        0x30
+#define ILI932X_GAMMA_CTRL2        0x31
+#define ILI932X_GAMMA_CTRL3        0x32
+#define ILI932X_GAMMA_CTRL4        0x35
+#define ILI932X_GAMMA_CTRL5        0x36
+#define ILI932X_GAMMA_CTRL6        0x37
+#define ILI932X_GAMMA_CTRL7        0x38
+#define ILI932X_GAMMA_CTRL8        0x39
+#define ILI932X_GAMMA_CTRL9        0x3C
+#define ILI932X_GAMMA_CTRL10       0x3D
+#define ILI932X_HOR_START_AD       0x50
+#define ILI932X_HOR_END_AD         0x51
+#define ILI932X_VER_START_AD       0x52
+#define ILI932X_VER_END_AD         0x53
+#define ILI932X_GATE_SCAN_CTRL1    0x60
+#define ILI932X_GATE_SCAN_CTRL2    0x61
+#define ILI932X_GATE_SCAN_CTRL3    0x6A
+#define ILI932X_PART_IMG1_DISP_POS 0x80
+#define ILI932X_PART_IMG1_START_AD 0x81
+#define ILI932X_PART_IMG1_END_AD   0x82
+#define ILI932X_PART_IMG2_DISP_POS 0x83
+#define ILI932X_PART_IMG2_START_AD 0x84
+#define ILI932X_PART_IMG2_END_AD   0x85
+#define ILI932X_PANEL_IF_CTRL1     0x90
+#define ILI932X_PANEL_IF_CTRL2     0x92
+#define ILI932X_PANEL_IF_CTRL3     0x93
+#define ILI932X_PANEL_IF_CTRL4     0x95
+#define ILI932X_PANEL_IF_CTRL5     0x97
+#define ILI932X_PANEL_IF_CTRL6     0x98
+
+#define HX8347G_COLADDRSTART_HI    0x02
+#define HX8347G_COLADDRSTART_LO    0x03
+#define HX8347G_COLADDREND_HI      0x04
+#define HX8347G_COLADDREND_LO      0x05
+#define HX8347G_ROWADDRSTART_HI    0x06
+#define HX8347G_ROWADDRSTART_LO    0x07
+#define HX8347G_ROWADDREND_HI      0x08
+#define HX8347G_ROWADDREND_LO      0x09
+#define HX8347G_MEMACCESS          0x16
+
+
+
+#define ILI9341_SOFTRESET          0x01
+#define ILI9341_SLEEPIN            0x10
+#define ILI9341_SLEEPOUT           0x11
+#define ILI9341_NORMALDISP         0x13
+#define ILI9341_INVERTOFF          0x20
+#define ILI9341_INVERTON           0x21
+#define ILI9341_GAMMASET           0x26
+#define ILI9341_DISPLAYOFF         0x28
+#define ILI9341_DISPLAYON          0x29
+#define ILI9341_COLADDRSET         0x2A
+#define ILI9341_PAGEADDRSET        0x2B
+#define ILI9341_MEMORYWRITE        0x2C
+#define ILI9341_PIXELFORMAT        0x3A
+#define ILI9341_FRAMECONTROL       0xB1
+#define ILI9341_DISPLAYFUNC        0xB6
+#define ILI9341_ENTRYMODE          0xB7
+#define ILI9341_POWERCONTROL1      0xC0
+#define ILI9341_POWERCONTROL2      0xC1
+#define ILI9341_VCOMCONTROL1      0xC5
+#define ILI9341_VCOMCONTROL2      0xC7
+#define ILI9341_MEMCONTROL      0x36
+#define ILI9341_MADCTL  0x36
+
+#define ILI9341_MADCTL_MY  0x80
+#define ILI9341_MADCTL_MX  0x40
+#define ILI9341_MADCTL_MV  0x20
+#define ILI9341_MADCTL_ML  0x10
+#define ILI9341_MADCTL_RGB 0x00
+#define ILI9341_MADCTL_BGR 0x08
+#define ILI9341_MADCTL_MH  0x04
+
+
+
+#define HX8357_NOP     0x00
+#define HX8357_SWRESET 0x01
+#define HX8357_RDDID   0x04
+#define HX8357_RDDST   0x09
+
+#define HX8357B_RDPOWMODE  0x0A
+#define HX8357B_RDMADCTL  0x0B
+#define HX8357B_RDCOLMOD  0x0C
+#define HX8357B_RDDIM  0x0D
+#define HX8357B_RDDSDR  0x0F
+
+#define HX8357_SLPIN   0x10
+#define HX8357_SLPOUT  0x11
+#define HX8357B_PTLON   0x12
+#define HX8357B_NORON   0x13
+
+#define HX8357_INVOFF  0x20
+#define HX8357_INVON   0x21
+#define HX8357_DISPOFF 0x28
+#define HX8357_DISPON  0x29
+
+#define HX8357_CASET   0x2A
+#define HX8357_PASET   0x2B
+#define HX8357_RAMWR   0x2C
+#define HX8357_RAMRD   0x2E
+
+#define HX8357B_PTLAR   0x30
+#define HX8357_TEON  0x35
+#define HX8357_TEARLINE  0x44
+#define HX8357_MADCTL  0x36
+#define HX8357_COLMOD  0x3A
+
+#define HX8357_SETOSC 0xB0
+#define HX8357_SETPWR1 0xB1
+#define HX8357B_SETDISPLAY 0xB2
+#define HX8357_SETRGB 0xB3
+#define HX8357D_SETCOM  0xB6
+
+#define HX8357B_SETDISPMODE  0xB4
+#define HX8357D_SETCYC  0xB4
+#define HX8357B_SETOTP 0xB7
+#define HX8357D_SETC 0xB9
+
+#define HX8357B_SET_PANEL_DRIVING 0xC0
+#define HX8357D_SETSTBA 0xC0
+#define HX8357B_SETDGC  0xC1
+#define HX8357B_SETID  0xC3
+#define HX8357B_SETDDB  0xC4
+#define HX8357B_SETDISPLAYFRAME 0xC5
+#define HX8357B_GAMMASET 0xC8
+#define HX8357B_SETCABC  0xC9
+#define HX8357_SETPANEL  0xCC
+
+
+#define HX8357B_SETPOWER 0xD0
+#define HX8357B_SETVCOM 0xD1
+#define HX8357B_SETPWRNORMAL 0xD2
+
+#define HX8357B_RDID1   0xDA
+#define HX8357B_RDID2   0xDB
+#define HX8357B_RDID3   0xDC
+#define HX8357B_RDID4   0xDD
+
+#define HX8357D_SETGAMMA 0xE0
+
+#define HX8357B_SETGAMMA 0xC8
+#define HX8357B_SETPANELRELATED  0xE9
+
+#define HX8357B_MADCTL_MY  0x80
+#define HX8357B_MADCTL_MX  0x40
+#define HX8357B_MADCTL_MV  0x20
+#define HX8357B_MADCTL_ML  0x10
+#define HX8357B_MADCTL_RGB 0x00
+#define HX8357B_MADCTL_BGR 0x08
+#define HX8357B_MADCTL_MH  0x04