Update ldf_cache.py

LoRaWAN Decoder File for Dragino DDS75-LB/LS

An Ultrasonic distance sensor

https://www.dragino.com/products/distance-level-sensor/item/271-dds75-lb-ls.html

.github/PULL_REQUEST_TEMPLATE.md

@@ -7,7 +7,7 @@
   - [ ] Only relevant files were touched
   - [ ] Only one feature/fix was added per PR and the code change compiles without warnings
   - [ ] The code change is tested and works with Tasmota core ESP8266 V.2.7.8
-  - [ ] The code change is tested and works with Tasmota core ESP32 V.3.1.3.250411
+  - [ ] The code change is tested and works with Tasmota core ESP32 V.3.1.3.250504
   - [ ] I accept the [CLA](https://github.com/arendst/Tasmota/blob/development/CONTRIBUTING.md#contributor-license-agreement-cla).
 
 _NOTE: The code change must pass CI tests. **Your PR cannot be merged unless tests pass**_

.github/workflows/Tasmota_build_devel.yml

@@ -24,7 +24,7 @@ jobs:
       - name: Set up Python
         uses: actions/setup-python@v5
         with:
-          python-version: '3.x'
+          python-version: '3.13'
 
       - name: Make Berry and Solidify code
         run: |
@@ -61,7 +61,7 @@ jobs:
       - name: Set up Python
         uses: actions/setup-python@v5
         with:
-          python-version: '3.x'
+          python-version: '3.13'
       - uses: actions/download-artifact@v4
         with:
           pattern: berry
@@ -105,7 +105,7 @@ jobs:
       - name: Set up Python
         uses: actions/setup-python@v5
         with:
-          python-version: '3.x'
+          python-version: '3.13'
       - name: Install dependencies
         run: |
           pip install wheel
@@ -117,6 +117,9 @@ jobs:
           SHA=${COMMIT_SHA_LONG::7}
           sed -i -e "s/TASMOTA_SHA_SHORT/TASMOTA_SHA_SHORT $SHA-/g" ./tasmota/include/tasmota_version.h
       - name: Run PlatformIO
+        env:
+          PYTHONIOENCODING: utf-8
+          PYTHONUTF8: '1'
         run: platformio run -e ${{ matrix.variant }}
       #- name: Use esp32-solo1 safeboot for esp32 too
         #run: |
@@ -152,7 +155,7 @@ jobs:
       - name: Set up Python
         uses: actions/setup-python@v5
         with:
-          python-version: '3.x'
+          python-version: '3.13'
       - name: Install dependencies
         run: |
           pip install wheel
@@ -163,6 +166,9 @@ jobs:
           SHA=${COMMIT_SHA_LONG::7}
           sed -i -e "s/TASMOTA_SHA_SHORT/TASMOTA_SHA_SHORT $SHA-/g" ./tasmota/include/tasmota_version.h
       - name: Run PlatformIO
+        env:
+          PYTHONIOENCODING: utf-8
+          PYTHONUTF8: '1'
         run: platformio run -e ${{ matrix.variant }}
       - name: Upload firmware artifacts
         uses: actions/upload-artifact@v4
@@ -200,7 +206,7 @@ jobs:
       - name: Set up Python
         uses: actions/setup-python@v5
         with:
-          python-version: '3.x'
+          python-version: '3.13'
       - name: Install dependencies
         run: |
           pip install wheel
@@ -221,6 +227,9 @@ jobs:
           SHA=${COMMIT_SHA_LONG::7}
           sed -i -e "s/TASMOTA_SHA_SHORT/TASMOTA_SHA_SHORT $SHA-/g" ./tasmota/include/tasmota_version.h
       - name: Run PlatformIO
+        env:
+          PYTHONIOENCODING: utf-8
+          PYTHONUTF8: '1'
         run: platformio run -e ${{ matrix.variant }}
       - name: Upload firmware artifacts
         uses: actions/upload-artifact@v4
@@ -244,7 +253,7 @@ jobs:
       - name: Set up Python
         uses: actions/setup-python@v5
         with:
-          python-version: '3.x'
+          python-version: '3.13'
       - name: Install dependencies
         run: |
           pip install wheel
@@ -265,6 +274,9 @@ jobs:
           SHA=${COMMIT_SHA_LONG::7}
           sed -i -e "s/TASMOTA_SHA_SHORT/TASMOTA_SHA_SHORT $SHA-/g" ./tasmota/include/tasmota_version.h
       - name: Run PlatformIO
+        env:
+          PYTHONIOENCODING: utf-8
+          PYTHONUTF8: '1'
         run: platformio run -e ${{ matrix.variant }}-${{ matrix.language }}
       - name: Upload language firmware artifacts
         uses: actions/upload-artifact@v4

.github/workflows/Tasmota_build_master.yml

@@ -39,7 +39,7 @@ jobs:
       - name: Set up Python
         uses: actions/setup-python@v5
         with:
-          python-version: '3.x'
+          python-version: '3.13'
       - name: Install dependencies
         run: |
           pip install wheel
@@ -49,6 +49,9 @@ jobs:
         run: |
           sed -i -e "s/TASMOTA_SHA_SHORT/TASMOTA_SHA_SHORT release-/g" ./tasmota/include/tasmota_version.h
       - name: Run PlatformIO
+        env:
+          PYTHONIOENCODING: utf-8
+          PYTHONUTF8: '1'
         run: platformio run -e ${{ matrix.variant }}
       - name: Upload safeboot firmware artifacts
         uses: actions/upload-artifact@v4
@@ -80,7 +83,7 @@ jobs:
       - name: Set up Python
         uses: actions/setup-python@v5
         with:
-          python-version: '3.x'
+          python-version: '3.13'
       - name: Install dependencies
         run: |
           pip install wheel
@@ -90,6 +93,9 @@ jobs:
         run: |
           sed -i -e "s/TASMOTA_SHA_SHORT/TASMOTA_SHA_SHORT release-/g" ./tasmota/include/tasmota_version.h
       - name: Run PlatformIO
+        env:
+          PYTHONIOENCODING: utf-8
+          PYTHONUTF8: '1'
         run: platformio run -e ${{ matrix.variant }}
       - name: Upload firmware artifacts
         uses: actions/upload-artifact@v4
@@ -127,7 +133,7 @@ jobs:
       - name: Set up Python
         uses: actions/setup-python@v5
         with:
-          python-version: '3.x'
+          python-version: '3.13'
       - name: Install dependencies
         run: |
           pip install wheel
@@ -146,6 +152,9 @@ jobs:
         run: |
           sed -i -e "s/TASMOTA_SHA_SHORT/TASMOTA_SHA_SHORT release-/g" ./tasmota/include/tasmota_version.h
       - name: Run PlatformIO
+        env:
+          PYTHONIOENCODING: utf-8
+          PYTHONUTF8: '1'
         run: platformio run -e ${{ matrix.variant }}
       - name: Upload firmware artifacts
         uses: actions/upload-artifact@v4
@@ -169,7 +178,7 @@ jobs:
       - name: Set up Python
         uses: actions/setup-python@v5
         with:
-          python-version: '3.x'
+          python-version: '3.13'
       - name: Install dependencies
         run: |
           pip install wheel
@@ -188,6 +197,9 @@ jobs:
         run: |
           sed -i -e "s/TASMOTA_SHA_SHORT/TASMOTA_SHA_SHORT release-/g" ./tasmota/include/tasmota_version.h
       - name: Run PlatformIO
+        env:
+          PYTHONIOENCODING: utf-8
+          PYTHONUTF8: '1'
         run: platformio run -e ${{ matrix.variant }}-${{ matrix.language }}
       - name: Upload language firmware artifacts
         uses: actions/upload-artifact@v4

.github/workflows/build_all_the_things.yml

@@ -31,15 +31,15 @@ jobs:
       - name: Set up Python
         uses: actions/setup-python@v5
         with:
-          python-version: '3.x'
+          python-version: '3.13'
       - name: Install dependencies
         run: |
           pip install wheel
-          #python -m pip install --upgrade pip
           pip install -U platformio
-          #platformio upgrade --dev
-          #platformio update
       - name: Run PlatformIO
+        env:
+          PYTHONIOENCODING: utf-8
+          PYTHONUTF8: '1'
         run: platformio run -e ${{ matrix.variant }}
       - uses: actions/upload-artifact@v4
         with:
@@ -59,15 +59,15 @@ jobs:
       - name: Set up Python
         uses: actions/setup-python@v5
         with:
-          python-version: '3.12'
+          python-version: '3.13'
       - name: Install dependencies
         run: |
           pip install wheel
-          #python -m pip install --upgrade pip
           pip install -U platformio
-          #platformio upgrade --dev
-          #platformio update
       - name: Run PlatformIO
+        env:
+          PYTHONIOENCODING: utf-8
+          PYTHONUTF8: '1'
         run: platformio run -e ${{ matrix.variant }}
       - uses: actions/upload-artifact@v4
         with:
@@ -117,16 +117,16 @@ jobs:
       - name: Set up Python
         uses: actions/setup-python@v5
         with:
-          python-version: '3.x'
+          python-version: '3.13'
       - name: Install dependencies
         run: |
           pip install wheel
-          #python -m pip install --upgrade pip
           pip install -U platformio
-          #platformio upgrade --dev
-          #platformio update
           cp ./platformio_override_sample.ini ./platformio_override.ini
       - name: Run PlatformIO
+        env:
+          PYTHONIOENCODING: utf-8
+          PYTHONUTF8: '1'
         run: platformio run -e ${{ matrix.variant }}
       - uses: actions/upload-artifact@v4
         with:
@@ -146,15 +146,15 @@ jobs:
       - name: Set up Python
         uses: actions/setup-python@v5
         with:
-          python-version: '3.x'
+          python-version: '3.13'
       - name: Install dependencies
         run: |
           pip install wheel
-          #python -m pip install --upgrade pip
           pip install -U platformio
-          #platformio upgrade --dev
-          #platformio update
       - name: Run PlatformIO
+        env:
+          PYTHONIOENCODING: utf-8
+          PYTHONUTF8: '1'
         run: platformio run -e ${{ matrix.variant }}-${{ matrix.language }}
       - uses: actions/upload-artifact@v4
         with:

.gitignore

@@ -19,6 +19,8 @@ managed_components
 .cache
 .dummy
 sdkconfig.*
+sdkconfig.defaults
+CMakeLists.txt
 data
 unpacked_fs
 unpacked_boards

CHANGELOG.md

@@ -3,7 +3,98 @@ All notable changes to this project will be documented in this file.
 
 ## [Unreleased] - Development
 
-## [14.5.0.3] 
+## [15.0.1.1]
+### Added
+- I2S additions (#23543)
+
+### Breaking Changed
+
+### Changed
+- BLE updates for esp-nimble-cpp v2.x (#23553)
+- Library names (#23560)
+
+### Fixed
+
+### Removed
+
+
+## [Released]
+
+## [15.0.1] 20250614
+- Release Sharon
+
+## [15.0.0.1] 20250614
+### Fixed
+- LVGL regression missing `lv.ANIM_OFF` and `lv.ANIM_ON` (#23544)
+- Berry fix `realline` (#23546)
+- LVGL HASPmota fix regression introduced with LVGL 9.3.0 (#23547)
+
+## [15.0.0] 20250613
+- Release Sharon
+
+## [14.6.0.2] 20250613
+### Added
+- Allow temporary change of DisplayDimmer (#23406)
+- Support for LoRaWan Rx1 and Rx2 profiles (#23394)
+- HASPmota auto-dimming when no touch (#23425)
+- Provide serial upload port from VSC to PIO (#23436)
+- Berry support for `sortedmap` (#23441)
+- Berry `introspect.module` option to not cache module entry (#23451)
+- Berry `webserver.remove_route` to revert `webserver.on` (#23452)
+- Berry `compile` and `tasmota.compile` option to compile in local context (#23457)
+- Support for AP33772S USB PD Sink Controller as used in CentyLab RotoPD
+- Berry mqtt publish rule processing
+- Berry `tasmota.is_network_up()` (#23532)
+
+### Changed
+- ESP32 Platform from 2025.04.30 to 2025.05.40, Framework (Arduino Core) from v3.1.3.250411 to v3.2.0.250504 and IDF from v5.3.2.250403 to v5.4.1.250501 (#23397)
+- ESP32 Platform from 2025.05.40 to 2025.05.30, Framework (Arduino Core) from v3.2.0.250504 to v3.1.3.250504 and IDF from v5.4.1.250501 to v5.3.3.250501 (#23404)
+- ESP8266 platform update from 2024.09.00 to 2025.05.00 (#23448)
+- Increase number of supported LoRaWan nodes from 4 to 16
+- Berry change number parser for json to reuse same parser as lexer (#23505)
+- Berry increase web hooks from 16 to 32 (#23507)
+- ESP32 LVGL library from v9.2.2 to v9.3.0 (#23518)
+- Zigbee improved message when coordinator failed to start (#23525)
+- Format syslog messages according to RFC5424 adding local log time (#23509)
+
+### Fixed
+- Haspmota `haspmota.parse()` page parsing (#23403)
+- ESP32-S3 display stability regression from #23397 (#23404)
+- DNS setting with `IPAddress4/5` not persisted (#23426)
+- Berry avoid json parsing for unmatched commands (#23494)
+- Berry integer and real parser to handle overflows (#23495)
+- Berry potential pointer underflow with `string.endswith` (#23496)
+- Autoconf failing when last line has no trailing LF (#23537)
+- LVGL Tasmota logo splash screen (#23538)
+
+## [14.6.0.1] 20250510
+### Added
+- Command `JsonPP 0..7` to enable (>0) JSON Pretty Print on user interfaces and set number of indents
+- Command `JsonPP <command>|backlog <command>;...` to enable JSON PP only once
+- WebUI status line for MQTT and TLS, added `FUNC_WEB_STATUS` event (#23326)
+- Wireguard VPN (#23347)
+- Optional Wifi strength indicator in WebUI status line (#23352)
+- WebUI status line left and renamed events `FUNC_WEB_STATUS_LEFT` and `FUNC_WEB_STATUS_RIGHT` (#23354)
+- WebUI heap status (#23356)
+- Support for multi channel AU915-928 LoRaWanBridge by Rob Clark (#23372)
+- HASPmota `antiburn()` (#23400)
+
+### Changed
+- Allow command `WebRefresh` minimum from 1000 to 400 mSec
+- GPIOViewer from v1.6.2 to v1.6.3 (No functional change)
+
+### Fixed
+- Berry `bytes().asstring()` now truncates a string if buffer contains NULL (#23311)
+- Berry string literals containing NULL are truncated (#23312)
+- Berry `display.touch_update` wrongly applies resistive calibration (#23363)
+- NimBLE log_level definition conflict (#23366)
+- Matter and mDNS can be enabled at the same time (#23373)
+- Berry `introspect.module()` failed to load modules in files (#23376)
+
+## [14.6.0] 20250416
+- Release Ryan
+
+## [14.5.0.3] 20250416
 ### Added
 - Extend command `GPIO` with different display options and allowing updating of module GPIO's in one go
 - Berry `bytes.add()` now accepts 3-bytes values (#23200)
@@ -29,9 +120,6 @@ All notable changes to this project will be documented in this file.
 - TLS increase timeout and fix crash (#23249)
 - Berry `readline` when a line is exactly 98 characters (#23276)
 
-### Removed
-
-
 ## [14.5.0.2] 20250325
 ### Added
 - Berry load `.tapp` files in `/.extensions/` then in `/` (#23113)
@@ -77,8 +165,6 @@ All notable changes to this project will be documented in this file.
 ### Fixed
 - Too many zeros in RCSwitch received data regression from v14.4.1.4 (#23050)
 
-## [Released]
-
 ## [14.5.0] 20250219
 - Release Ruth
 

CODE_OWNERS.md

@@ -91,7 +91,7 @@ In addition to @arendst the following code is mainly owned by:
 | xdrv_77_wizmote              | @arendst
 | xdrv_78_telnet               | @arendst
 | xdrv_79_esp32_ble            | @staars, @btsimonh
-| xdrv_80                      |
+| xdrv_80_wireguard_client     | @s-hadinger
 | xdrv_81_esp32_webcam         | @gemu, @philrich
 | xdrv_82_esp32_ethernet       | @arendst
 | xdrv_83_esp32_watch          | @gemu
@@ -101,11 +101,12 @@ In addition to @arendst the following code is mainly owned by:
 | xdrv_88_esp32_shelly_pro     | @arendst
 | xdrv_89_                     |
 | xdrv_90_esp32_dingtian_relay | @barbudor
-| xdrv_91_                     |
+| xdrv_91_esp32_twai           | @arendst
 | xdrv_92_                     |
 | xdrv_93_                     |
 | xdrv_94_                     |
 |                              |
+| xdrv_119_i2c_ap33772s        | @arendst
 | xdrv_120_xyzmodem            | @arendst
 | xdrv_121_gpioviewer          | @arendst
 | xdrv_122_file_settings_demo  | @arendst

FIRMWARE.md

@@ -18,7 +18,7 @@ See [CHANGELOG.md](https://github.com/arendst/Tasmota/blob/development/CHANGELOG
 
 ## Development
 
-[![Dev Version](https://img.shields.io/badge/development%20version-v14.5.x.x-blue.svg)](https://github.com/arendst/Tasmota)
+[![Dev Version](https://img.shields.io/badge/development%20version-v15.0.x.x-blue.svg)](https://github.com/arendst/Tasmota)
 [![Download Dev](https://img.shields.io/badge/download-development-yellow.svg)](http://ota.tasmota.com/tasmota/)
 [![Tasmota CI](https://github.com/arendst/Tasmota/workflows/Tasmota%20CI/badge.svg)](https://github.com/arendst/Tasmota/actions?query=workflow%3A%22Tasmota+CI%22)
 [![Tasmota ESP32 CI](https://github.com/arendst/Tasmota/workflows/Tasmota%20ESP32%20CI/badge.svg)](https://github.com/arendst/Tasmota/actions?query=workflow%3A%22Tasmota+ESP32+CI%22)

I2CDEVICES.md

@@ -130,5 +130,6 @@ Index | Define              | Driver   | Device   | Address(es) | Bus2 | Descrip
   90  | USE_RX8010          | xdrv_56  | RX8010    | 0x32       | Yes  | RX8010 RTC from IOTTIMER
   91  | USE_MS5837          | xsns_116 | MS5837    | 0x76       |      | Pressure and temperature sensor
   92  | USE_PCF85063        | xdrv_56  | PCF85063  | 0x51       |      | PCF85063 Real time clock
+  93  | USE_AS33772S        | xdrv_119 | AS33772S  | 0x52       | Yes  | AS33772S USB PD Sink Controller
 
   NOTE: Bus2 supported on ESP32 only.

README.md

@@ -31,7 +31,7 @@ Firmware binaries can be downloaded from http://ota.tasmota.com/tasmota/release/
 
 ## Development
 
-[![Dev Version](https://img.shields.io/badge/development%20version-v14.5.x.x-blue.svg)](https://github.com/arendst/Tasmota)
+[![Dev Version](https://img.shields.io/badge/development%20version-v15.0.x.x-blue.svg)](https://github.com/arendst/Tasmota)
 [![Download Dev](https://img.shields.io/badge/download-development-yellow.svg)](http://ota.tasmota.com/tasmota/)
 [![Tasmota CI](https://github.com/arendst/Tasmota/actions/workflows/build_all_the_things.yml/badge.svg)](https://github.com/arendst/Tasmota/actions/workflows/build_all_the_things.yml)
 [![Build_development](https://github.com/arendst/Tasmota/actions/workflows/Tasmota_build_devel.yml/badge.svg)](https://github.com/arendst/Tasmota/actions/workflows/Tasmota_build_devel.yml)

RELEASENOTES.md

@@ -36,9 +36,9 @@ While fallback or downgrading is common practice it was never supported due to S
 
 This release will be supported from ESP8266/Arduino library Core version **2.7.8** due to reported security and stability issues on previous Core version. This will also support gzipped binaries.
 
-This release will be supported from ESP32/Arduino library Core version **v3.1.1.250203**.
+This release will be supported from ESP32/Arduino library Core version **v3.1.3.250504**.
 
-Support of ESP8266 Core versions before 2.7.8 and ESP32 Core versions before v3.1.1.250203 have been removed.
+Support of ESP8266 Core versions before 2.7.8 and ESP32 Core versions before v3.1.3.250504 have been removed.
 
 ## Support of TLS
 
@@ -75,12 +75,12 @@ Latest released binaries can be downloaded from
 - http://ota.tasmota.com/tasmota/release
 
 Historical binaries can be downloaded from
-- http://ota.tasmota.com/tasmota/release-14.5.0
+- http://ota.tasmota.com/tasmota/release-15.0.1
 
 The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz``
 
 ### ESP32, ESP32-C2, ESP32-C3, ESP32-C6, ESP32-S2 and ESP32-S3 based
-The following binary downloads have been compiled with ESP32/Arduino library core version **v3.1.1.250203**.
+The following binary downloads have been compiled with ESP32/Arduino library core version **v3.1.3.250504**.
 
 - **tasmota32.bin** = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash.  **RECOMMENDED RELEASE BINARY**
 - **tasmota32solo1.bin** = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
@@ -104,7 +104,7 @@ Latest released binaries can be downloaded from
 - https://ota.tasmota.com/tasmota32/release
 
 Historical binaries can be downloaded from
-- https://ota.tasmota.com/tasmota32/release-14.5.0
+- https://ota.tasmota.com/tasmota32/release-15.0.1
 
 The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin``
 
@@ -114,58 +114,16 @@ The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasm
 
 [Complete list](BUILDS.md) of available feature and sensors.
 
-## Changelog v14.5.0.3
+## Changelog v15.0.1.1
 ### Added
-- Filesystem command ``UfsList[2]``
-- Extend command `GPIO` with different display options and allowing updating of module GPIO's in one go
-- Support Vango Technologies V924x ultralow power, single-phase, power measurement [#23127](https://github.com/arendst/Tasmota/issues/23127)
-- Support for HLK-LD2402 24GHz smart wave motion sensor [#23133](https://github.com/arendst/Tasmota/issues/23133)
-- Support for Telnet server using command `Telnet <0|1|port>[,<IP filter>]` if enabled with `#define USE_TELNET`
-- Support for XMODEM over serial and telnet if enabled with `#define USE_XYZMODEM`
-- PZEM_AC device address in JSON and GUI [#23268](https://github.com/arendst/Tasmota/issues/23268)
-- Allow acl in mqtt when client certificate is in use with `#define USE_MQTT_CLIENT_CERT` [#22998](https://github.com/arendst/Tasmota/issues/22998)
-- AlpineJS 2.8.2 - optional for now [#23259](https://github.com/arendst/Tasmota/issues/23259)
-- ESP32 show network interface priority in `Status 5` debug logging [#23302](https://github.com/arendst/Tasmota/issues/23302)
-- Berry experimental driver for AXP2101 for M5Core2v1.1 [#23039](https://github.com/arendst/Tasmota/issues/23039)
-- Berry `tasmota.when_network_up()` and simplified Matter using it [#23057](https://github.com/arendst/Tasmota/issues/23057)
-- Berry `introspect.solidified()` to know if a Berry object is solidified or in RAM [#23063](https://github.com/arendst/Tasmota/issues/23063)
-- Berry `global.undef()` to undefine a global variable [#23073](https://github.com/arendst/Tasmota/issues/23073)
-- Berry load `.tapp` files in `/.extensions/` then in `/` [#23113](https://github.com/arendst/Tasmota/issues/23113)
-- Berry `re.dump()` [#23162](https://github.com/arendst/Tasmota/issues/23162)
-- Berry `bytes.add()` now accepts 3-bytes values [#23200](https://github.com/arendst/Tasmota/issues/23200)
-- Berry expose `esp_http_server` for websockets [#23206](https://github.com/arendst/Tasmota/issues/23206)
-- Matter prepare for ICD cluster [#23158](https://github.com/arendst/Tasmota/issues/23158)
-- LVGL experimental mirroring of display on Web UI [#23041](https://github.com/arendst/Tasmota/issues/23041)
-- HASPmota autostart when `pages.jsonl` exists [#23181](https://github.com/arendst/Tasmota/issues/23181)
+- I2S additions [#23543](https://github.com/arendst/Tasmota/issues/23543)
 
 ### Breaking Changed
-- Berry remove `Leds.create_matrix` from the standard library waiting for reimplementation [#23114](https://github.com/arendst/Tasmota/issues/23114)
-- HASPmota added `y2_min` and `y2_max` to control the second series of `chart` [#23287](https://github.com/arendst/Tasmota/issues/23287)
-- HASPmota default theme is now Tasmota-style [#23288](https://github.com/arendst/Tasmota/issues/23288)
 
 ### Changed
-- ESP32 Platform from 2025.02.30 to 2025.04.30, Framework (Arduino Core) from v3.1.1.250203 to v3.1.3.250411 and IDF from v5.3.2.250120 to 5.3.2.250403 [#23280](https://github.com/arendst/Tasmota/issues/23280)
-- Output of commands `GPIO` and `GPIOs` swapped
-- Smoothen light gamma curve when using `Fade` [#23230](https://github.com/arendst/Tasmota/issues/23230)
-- RCSwitch `RCSWITCH_SEPARATION_LIMIT` from 4100 to 3600
-- GPIOViewer from v1.6.1 to v1.6.2 (No functional change)
-- HLK-LD2402 updates for firmware 3.3.5+ [#23281](https://github.com/arendst/Tasmota/issues/23281)
-- ESP8266 enable FTP for >= 4MB variants [#23120](https://github.com/arendst/Tasmota/issues/23120)
-- ESP32 enable webcam version 2 [#18732](https://github.com/arendst/Tasmota/issues/18732)
-- Berry update flasher for Sonoff ZBBridge Pro [#23136](https://github.com/arendst/Tasmota/issues/23136)
-- Berry `re` now accepts `bytes()` as precompiled patterns, added `re.compilebytes()` [#23149](https://github.com/arendst/Tasmota/issues/23149)
-- LVGL, prepare for HASPmota theme, change: no-grow when clicked, DPI set to 160 [#23040](https://github.com/arendst/Tasmota/issues/23040)
-- LVGL Mirroring add checkbox to enable/disable the feature (in the iterim for a better solution) [#23047](https://github.com/arendst/Tasmota/issues/23047)
-- Leds Panel add checkbox to enable/disable the feature (in the iterim for a better solution) [#23048](https://github.com/arendst/Tasmota/issues/23048)
+- BLE updates for esp-nimble-cpp v2.x [#23553](https://github.com/arendst/Tasmota/issues/23553)
+- Library names [#23560](https://github.com/arendst/Tasmota/issues/23560)
 
 ### Fixed
-- Too many zeros in RCSwitch received data regression from v14.4.1.4 [#23050](https://github.com/arendst/Tasmota/issues/23050)
-- INA226 driver fixes [#23197](https://github.com/arendst/Tasmota/issues/23197)
-- TLS increase timeout and fix crash [#23249](https://github.com/arendst/Tasmota/issues/23249)
-- ESP32 receive incomplete serial data over 128 bytes [#23156](https://github.com/arendst/Tasmota/issues/23156)
-- ESP32 intermittent exception on WiFi AP cannot be reached [#23115](https://github.com/arendst/Tasmota/issues/23115)
-- ESP32-C3 WiFi sleep [#23096](https://github.com/arendst/Tasmota/issues/23096)
-- Berry prevent `import` from hiding a solidified class [#23112](https://github.com/arendst/Tasmota/issues/23112)
-- Berry `readline` when a line is exactly 98 characters [#23276](https://github.com/arendst/Tasmota/issues/23276)
 
 ### Removed

TEMPLATES.md

@@ -5,7 +5,7 @@
 
 # Templates
 
-Find below the available templates as of April 2025. More template information can be found in the [Tasmota Device Templates Repository](http://blakadder.github.io/templates)
+Find below the available templates as of June 2025. More template information can be found in the [Tasmota Device Templates Repository](http://blakadder.github.io/templates)
 
 ## Adapter Board
 ```
@@ -403,7 +403,6 @@ Shelly Vintage 4W 260lm 2700k  {"NAME":"Shelly Vintage","GPIO":[0,0,0,0,416,0,0,
 Shelly Vintage 7W 750lm 2700k  {"NAME":"Shelly Vintage","GPIO":[0,0,0,0,416,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":18}
 Shelly Vintage 7W 750lm 2700k  {"NAME":"Shelly Vintage","GPIO":[0,0,0,0,416,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":18}
 SmartDGM 9W 806lm            {"NAME":"L-WB9W1","GPIO":[0,0,0,0,0,416,0,0,160,0,0,0,0,0],"FLAG":0,"BASE":18}
-Smitch 10W 6500K             {"NAME":"Smitch Ambience SB-0110","GPIO":[0,0,0,0,416,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":18}
 Smitch 10W 6500K             {"NAME":"Smitch 10W 6500K Dimmable Bulb (SB0110 - E27)","GPIO":[0,0,0,0,0,416,0,0,0,417,0,0,0,0],"FLAG":0,"BASE":1}
 TCP Smart 806lm Warm White   {"NAME":"TCP Smart Clas","GPIO":[0,0,0,0,0,0,0,0,0,416,0,0,0,0],"FLAG":0,"BASE":1}
 TCP Smart 810lm Filament     {"NAME":"TCP Filament","GPIO":[0,0,0,0,0,0,0,0,0,0,448,0,0,0],"FLAG":0,"BASE":18}
@@ -464,7 +463,7 @@ QS-WiFi-D01-TRIAC 150W       {"NAME":"QS-WiFi-D01-TRIAC","GPIO":[0,3200,0,3232,0
 RJWF-02A                     {"NAME":"RJWF-02A","GPIO":[32,2272,0,2304,0,0,0,0,0,0,288,0,0,0],"FLAG":0,"BASE":54}
 Shelly Dimmer                {"NAME":"Shelly Dimmer 1","GPIO":[0,3200,0,3232,5568,5600,0,0,192,0,193,288,0,4736],"FLAG":0,"BASE":18}
 Shelly Dimmer 2              {"NAME":"Shelly Dimmer 2","GPIO":[0,3200,0,3232,5568,5600,0,0,193,0,192,0,320,4736],"FLAG":0,"BASE":18}
-Shelly Plus 0-10V Dimmer     {"NAME":"Shelly Plus 0-10V Dimmer","GPIO":[288,0,0,0,192,0,0,0,0,0,0,0,0,0,193,1,0,0,0,0,0,32,416,0,0,0,0,0,4736,0,0,0,0,0,0,0],"FLAG":0,"BASE":1}
+Shelly Plus 0-10V Dimmer     {"NAME":"Shelly Plus 0-10V Dimmer","GPIO":[288,0,0,0,192,0,0,0,0,0,0,0,0,0,193,1,0,0,0,0,0,32,448,0,0,0,0,0,4736,0,0,0,0,0,0,0],"FLAG":0,"BASE":1}
 Sonoff D1                    {"NAME":"Sonoff D1","GPIO":[1,3200,0,3232,0,0,0,0,0,320,0,0,0,0],"FLAG":0,"BASE":74}
 ```
 

boards/esp32-solo1.json

@@ -41,6 +41,11 @@
   "download": {
     "speed": 230400
   },
+  "espidf": {
+    "custom_sdkconfig": [
+      "CONFIG_FREERTOS_UNICORE=y" 
+    ]
+  },
   "url": "https://www.espressif.com/sites/default/files/documentation/esp32-solo-1_datasheet_en.pdf",
   "vendor": "Espressif"
 }

boards/esp32c2.json

@@ -39,6 +39,6 @@
     "download": {
       "speed": 230400
     },
-    "url": "https://docs.espressif.com/projects/espressif-esp-dev-kits/en/latest/esp32c6/esp32-c6-devkitc-1/index.html",
+    "url": "https://docs.espressif.com/projects/espressif-esp-dev-kits/en/latest/esp8684/esp8684-devkitm-1/user_guide.html",
     "vendor": "Espressif"
   }

boards/esp32c2_2M.json

@@ -39,6 +39,6 @@
     "download": {
       "speed": 230400
     },
-    "url": "https://docs.espressif.com/projects/espressif-esp-dev-kits/en/latest/esp32c6/esp32-c6-devkitc-1/index.html",
+    "url": "https://docs.espressif.com/projects/espressif-esp-dev-kits/en/latest/esp8684/esp8684-devkitm-1/user_guide.html",
     "vendor": "Espressif"
   }

lib/default/Unishox-Tasmota-1.0/library.properties

@@ -1,8 +1,8 @@
-name=Unishox Compressor Decompressor highly customized and optimized for ESP8266 and Tasmota
+name=Unishox (De)Compressor
 version=1.0
 author=Arundale Ramanathan, Stephan Hadinger
 maintainer=Arun <arun@siara.cc>, Stephan <stephan.hadinger@gmail.com>
 sentence=Unishox compression for Tasmota Rules
-paragraph=It is based on Unishox hybrid encoding technique. This version has specific Unicode code removed for size.
+paragraph=It is based on Unishox hybrid encoding technique. This Tasmota version has specific Unicode code removed for size.
 url=https://github.com/siara-cc/Unishox
 architectures=esp8266,esp32

lib/default/WiFiHelper/src/WiFiHelper_ESP32.cpp

@@ -27,8 +27,8 @@ enum LoggingLevels {LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_D
 
 
 #ifdef USE_IPV6
-ip_addr_t dns_save4[DNS_MAX_SERVERS] = {};      // IPv4 DNS servers
-ip_addr_t dns_save6[DNS_MAX_SERVERS] = {};      // IPv6 DNS servers
+ip_addr_t dns_save4[2] = {};      // IPv4 DNS servers
+ip_addr_t dns_save6[2] = {};      // IPv6 DNS servers
 #endif // USE_IPV6
 
 #include "tasmota_options.h"
@@ -76,48 +76,72 @@ extern bool WifiHasIPv6(void);
 extern bool EthernetHasIPv6(void);
 
 void WiFiHelper::scrubDNS(void) {
+  // AddLog(LOG_LEVEL_DEBUG, "IP>1: dns_save4 %s %s dns_save6 %s %s",
+  //     IPAddress(&dns_save4[0]).toString().c_str(),IPAddress(&dns_save4[1]).toString().c_str(),
+  //     IPAddress(&dns_save6[0]).toString().c_str(),IPAddress(&dns_save6[1]).toString().c_str());
   // String dns_entry0 = IPAddress(dns_getserver(0)).toString();
   // String dns_entry1 = IPAddress(dns_getserver(1)).toString();
+
   // scan DNS entries
   bool has_v4 = WifiHasIPv4() || EthernetHasIPv4();
   bool has_v6 = false;
 #ifdef USE_IPV6
   has_v6 = WifiHasIPv6() || EthernetHasIPv6();
 #endif
+  // AddLog(LOG_LEVEL_DEBUG, "IP>1: DNS: (%s %s) has4/6:%i-%i", dns_entry0.c_str(), dns_entry1.c_str(), has_v4, has_v6);
 
-  // First pass, save values
-  for (uint32_t i=0; i<DNS_MAX_SERVERS; i++) {
 #ifdef USE_IPV6
+  // First pass, save values
+  for (uint32_t i=0; i<2; i++) {
     const IPAddress ip_dns = IPAddress(dns_getserver(i));
     // Step 1. save valid values from DNS
     if (!ip_addr_isany_val((const ip_addr_t &)ip_dns)) {
-      if (ip_dns.type() == IPv4 && has_v4) {
-        ip_dns.to_ip_addr_t(&dns_save4[i]);
-        // dns_save4[i] = (ip_addr_t) ip_dns;    // dns entry is populated, save it in v4 slot
+      if (ip_dns.type() == IPv4 && (has_v4 || !has_v6)) {
+        ip_dns.to_ip_addr_t(&dns_save4[i]);       // dns entry is populated, save it in v4 slot
       } else if (has_v6) {
-        ip_dns.to_ip_addr_t(&dns_save6[i]);
-        // dns_save6[i] = (ip_addr_t) ip_dns;    // dns entry is populated, save it in v6 slot
+        ip_dns.to_ip_addr_t(&dns_save6[i]);       // dns entry is populated, save it in v6 slot
       }
     }
-
-    // Step 2. scrub addresses not supported
-    if (!has_v4) { dns_save4[i] = *IP4_ADDR_ANY; }
-    if (!has_v6) { dns_save6[i] = *IP_ADDR_ANY; }
-
-    // Step 3. restore saved value
-    if (has_v4 && has_v6) {   // if both IPv4 and IPv6 are active, prefer IPv4
-      if (!ip_addr_isany_val(dns_save4[i])) { dns_setserver(i, &dns_save4[i]); }
-      else { dns_setserver(i, &dns_save6[i]); }
-    } else if (has_v4) {
-      dns_setserver(i, &dns_save4[i]);
-    } else if (has_v6) {
-      dns_setserver(i, &dns_save6[i]);
-    } else {
-      dns_setserver(i, IP4_ADDR_ANY);
-    }
-#endif // USE_IPV6
   }
-  // AddLog(LOG_LEVEL_DEBUG, "IP>: DNS: from(%s %s) to (%s %s) has4/6:%i-%i", dns_entry0.c_str(), dns_entry1.c_str(), IPAddress(dns_getserver(0)).toString().c_str(),  IPAddress(dns_getserver(1)).toString().c_str(), has_v4, has_v6);
+
+  // Step 2. scrub addresses not supported
+  if (!has_v4 && has_v6) {            // v6 only
+    dns_save4[0] = *IP4_ADDR_ANY;
+    dns_save4[1] = *IP4_ADDR_ANY;
+  }
+  if (!has_v6) {
+    dns_save6[0] = *IP_ADDR_ANY;
+    dns_save6[1] = *IP_ADDR_ANY;
+  }
+
+  // Step 3. restore saved value
+  if (has_v4 && has_v6) {   // if both IPv4 and IPv6 are active, prefer IPv4 for first and IPv6 for second
+    if (!ip_addr_isany_val(dns_save4[0])) {
+      // First DNS IPv4
+      dns_setserver(0, &dns_save4[0]);
+      if (!ip_addr_isany_val(dns_save6[0])) {
+        dns_setserver(1, &dns_save6[0]);    // take first IPv6 as second DNS
+      } else {
+        dns_setserver(1, &dns_save4[1]);    // or revert to second IPv4
+      }
+    } else {
+      // If no DNS IPv4, use IPv6
+      dns_setserver(0, &dns_save6[0]);
+      dns_setserver(1, &dns_save6[1]);
+    }
+  } else if (has_v6) {                      // v6 and no v4
+    dns_setserver(0, &dns_save6[0]);
+    dns_setserver(1, &dns_save6[1]);
+  } else {                                  // no v6, we use v4 even if not connected
+    dns_setserver(0, &dns_save4[0]);
+    dns_setserver(1, &dns_save4[1]);
+  }
+#endif // USE_IPV6
+  // AddLog(LOG_LEVEL_DEBUG, "IP>2: DNS: from(%s %s) to (%s %s) has4/6:%i-%i", dns_entry0.c_str(), dns_entry1.c_str(), IPAddress(dns_getserver(0)).toString().c_str(),  IPAddress(dns_getserver(1)).toString().c_str(), has_v4, has_v6);
+
+  // AddLog(LOG_LEVEL_DEBUG, "IP>2: dns_save4 %s %s dns_save6 %s %s",
+  //     IPAddress(&dns_save4[0]).toString().c_str(),IPAddress(&dns_save4[1]).toString().c_str(),
+  //     IPAddress(&dns_save6[0]).toString().c_str(),IPAddress(&dns_save6[1]).toString().c_str());
 }
 
 

lib/default/base64-1.1.1/src/base64.cpp

@@ -0,0 +1,128 @@
+/**
+ * Base64 encoding and decoding of strings. Uses '+' for 62, '/' for 63, '=' for padding
+ */
+
+ #include "base64.hpp"
+
+unsigned char binary_to_base64(unsigned char v) {
+  // Capital letters - 'A' is ascii 65 and base64 0
+  if(v < 26) return v + 'A';
+  
+  // Lowercase letters - 'a' is ascii 97 and base64 26
+  if(v < 52) return v + 71;
+  
+  // Digits - '0' is ascii 48 and base64 52
+  if(v < 62) return v - 4;
+  
+  // '+' is ascii 43 and base64 62
+  if(v == 62) return '+';
+  
+  // '/' is ascii 47 and base64 63
+  if(v == 63) return '/';
+  
+  return 64;
+}
+
+unsigned char base64_to_binary(unsigned char c) {
+  // Capital letters - 'A' is ascii 65 and base64 0
+  if('A' <= c && c <= 'Z') return c - 'A';
+  
+  // Lowercase letters - 'a' is ascii 97 and base64 26
+  if('a' <= c && c <= 'z') return c - 71;
+  
+  // Digits - '0' is ascii 48 and base64 52
+  if('0' <= c && c <= '9') return c + 4;
+  
+  // '+' is ascii 43 and base64 62
+  if(c == '+') return 62;
+  
+  // '/' is ascii 47 and base64 63
+  if(c == '/') return 63;
+  
+  return 255;
+}
+
+unsigned int encode_base64_length(unsigned int input_length) {
+  return (input_length + 2)/3*4;
+}
+
+unsigned int decode_base64_length(unsigned char input[]) {
+  unsigned char *start = input;
+  
+  while(base64_to_binary(input[0]) < 64) {
+    ++input;
+  }
+  
+  unsigned int input_length = input - start;
+  
+  unsigned int output_length = input_length/4*3;
+  
+  switch(input_length % 4) {
+    default: return output_length;
+    case 2: return output_length + 1;
+    case 3: return output_length + 2;
+  }
+}
+
+unsigned int encode_base64(unsigned char input[], unsigned int input_length, unsigned char output[]) {
+  unsigned int full_sets = input_length/3;
+  
+  // While there are still full sets of 24 bits...
+  for(unsigned int i = 0; i < full_sets; ++i) {
+    output[0] = binary_to_base64(                         input[0] >> 2);
+    output[1] = binary_to_base64((input[0] & 0x03) << 4 | input[1] >> 4);
+    output[2] = binary_to_base64((input[1] & 0x0F) << 2 | input[2] >> 6);
+    output[3] = binary_to_base64( input[2] & 0x3F);
+    
+    input += 3;
+    output += 4;
+  }
+  
+  switch(input_length % 3) {
+    case 0:
+      output[0] = '\0';
+      break;
+    case 1:
+      output[0] = binary_to_base64(                         input[0] >> 2);
+      output[1] = binary_to_base64((input[0] & 0x03) << 4);
+      output[2] = '=';
+      output[3] = '=';
+      output[4] = '\0';
+      break;
+    case 2:
+      output[0] = binary_to_base64(                         input[0] >> 2);
+      output[1] = binary_to_base64((input[0] & 0x03) << 4 | input[1] >> 4);
+      output[2] = binary_to_base64((input[1] & 0x0F) << 2);
+      output[3] = '=';
+      output[4] = '\0';
+      break;
+  }
+  
+  return encode_base64_length(input_length);
+}
+
+unsigned int decode_base64(unsigned char input[], unsigned char output[]) {
+  unsigned int output_length = decode_base64_length(input);
+  
+  // While there are still full sets of 24 bits...
+  for(unsigned int i = 2; i < output_length; i += 3) {
+    output[0] = base64_to_binary(input[0]) << 2 | base64_to_binary(input[1]) >> 4;
+    output[1] = base64_to_binary(input[1]) << 4 | base64_to_binary(input[2]) >> 2;
+    output[2] = base64_to_binary(input[2]) << 6 | base64_to_binary(input[3]);
+    
+    input += 4;
+    output += 3;
+  }
+  
+  switch(output_length % 3) {
+    case 1:
+      output[0] = base64_to_binary(input[0]) << 2 | base64_to_binary(input[1]) >> 4;
+      break;
+    case 2:
+      output[0] = base64_to_binary(input[0]) << 2 | base64_to_binary(input[1]) >> 4;
+      output[1] = base64_to_binary(input[1]) << 4 | base64_to_binary(input[2]) >> 2;
+      break;
+  }
+  
+  return output_length;
+}

lib/default/base64-1.1.1/src/base64.hpp

@@ -69,127 +69,4 @@ unsigned int encode_base64(unsigned char input[], unsigned int input_length, uns
  */
 unsigned int decode_base64(unsigned char input[], unsigned char output[]);
 
-unsigned char binary_to_base64(unsigned char v) {
-  // Capital letters - 'A' is ascii 65 and base64 0
-  if(v < 26) return v + 'A';
-  
-  // Lowercase letters - 'a' is ascii 97 and base64 26
-  if(v < 52) return v + 71;
-  
-  // Digits - '0' is ascii 48 and base64 52
-  if(v < 62) return v - 4;
-  
-  // '+' is ascii 43 and base64 62
-  if(v == 62) return '+';
-  
-  // '/' is ascii 47 and base64 63
-  if(v == 63) return '/';
-  
-  return 64;
-}
-
-unsigned char base64_to_binary(unsigned char c) {
-  // Capital letters - 'A' is ascii 65 and base64 0
-  if('A' <= c && c <= 'Z') return c - 'A';
-  
-  // Lowercase letters - 'a' is ascii 97 and base64 26
-  if('a' <= c && c <= 'z') return c - 71;
-  
-  // Digits - '0' is ascii 48 and base64 52
-  if('0' <= c && c <= '9') return c + 4;
-  
-  // '+' is ascii 43 and base64 62
-  if(c == '+') return 62;
-  
-  // '/' is ascii 47 and base64 63
-  if(c == '/') return 63;
-  
-  return 255;
-}
-
-unsigned int encode_base64_length(unsigned int input_length) {
-  return (input_length + 2)/3*4;
-}
-
-unsigned int decode_base64_length(unsigned char input[]) {
-  unsigned char *start = input;
-  
-  while(base64_to_binary(input[0]) < 64) {
-    ++input;
-  }
-  
-  unsigned int input_length = input - start;
-  
-  unsigned int output_length = input_length/4*3;
-  
-  switch(input_length % 4) {
-    default: return output_length;
-    case 2: return output_length + 1;
-    case 3: return output_length + 2;
-  }
-}
-
-unsigned int encode_base64(unsigned char input[], unsigned int input_length, unsigned char output[]) {
-  unsigned int full_sets = input_length/3;
-  
-  // While there are still full sets of 24 bits...
-  for(unsigned int i = 0; i < full_sets; ++i) {
-    output[0] = binary_to_base64(                         input[0] >> 2);
-    output[1] = binary_to_base64((input[0] & 0x03) << 4 | input[1] >> 4);
-    output[2] = binary_to_base64((input[1] & 0x0F) << 2 | input[2] >> 6);
-    output[3] = binary_to_base64( input[2] & 0x3F);
-    
-    input += 3;
-    output += 4;
-  }
-  
-  switch(input_length % 3) {
-    case 0:
-      output[0] = '\0';
-      break;
-    case 1:
-      output[0] = binary_to_base64(                         input[0] >> 2);
-      output[1] = binary_to_base64((input[0] & 0x03) << 4);
-      output[2] = '=';
-      output[3] = '=';
-      output[4] = '\0';
-      break;
-    case 2:
-      output[0] = binary_to_base64(                         input[0] >> 2);
-      output[1] = binary_to_base64((input[0] & 0x03) << 4 | input[1] >> 4);
-      output[2] = binary_to_base64((input[1] & 0x0F) << 2);
-      output[3] = '=';
-      output[4] = '\0';
-      break;
-  }
-  
-  return encode_base64_length(input_length);
-}
-
-unsigned int decode_base64(unsigned char input[], unsigned char output[]) {
-  unsigned int output_length = decode_base64_length(input);
-  
-  // While there are still full sets of 24 bits...
-  for(unsigned int i = 2; i < output_length; i += 3) {
-    output[0] = base64_to_binary(input[0]) << 2 | base64_to_binary(input[1]) >> 4;
-    output[1] = base64_to_binary(input[1]) << 4 | base64_to_binary(input[2]) >> 2;
-    output[2] = base64_to_binary(input[2]) << 6 | base64_to_binary(input[3]);
-    
-    input += 4;
-    output += 3;
-  }
-  
-  switch(output_length % 3) {
-    case 1:
-      output[0] = base64_to_binary(input[0]) << 2 | base64_to_binary(input[1]) >> 4;
-      break;
-    case 2:
-      output[0] = base64_to_binary(input[0]) << 2 | base64_to_binary(input[1]) >> 4;
-      output[1] = base64_to_binary(input[1]) << 4 | base64_to_binary(input[2]) >> 2;
-      break;
-  }
-  
-  return output_length;
-}
-
 #endif // ifndef

lib/default/jsmn-shadinger-1.0/src/JsonParser.h

@@ -25,9 +25,6 @@
 #include <stdlib.h>
 #include <Arduino.h>
 
-// #define strcmp_P(x, y) strcmp(x,y)
-// #define strcasecmp_P(x,y) strcasecmp(x,y)
-// #define pgm_read_byte(x)  (*(uint8_t*)(x))
 #ifndef ARRAY_SIZE
 #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
 #endif

lib/lib_basic/IRremoteESP8266/IRremoteESP8266/src/IRac.cpp

@@ -402,8 +402,10 @@ void IRac::airton(IRAirtonAc *ac,
                   const int16_t sleep) {
   ac->begin();
   ac->setPower(on);
-  ac->setMode(ac->convertMode(mode));
   ac->setTemp(degrees);
+  // Mode needs to be set after temp as Fan-only uses a special temp.
+  ac->setMode(ac->convertMode(mode));
+  // Fan needs to be set after mode, as setMode can change the fan speed.
   ac->setFan(ac->convertFan(fan));
   ac->setSwingV(swingv != stdAc::swingv_t::kOff);
   // No Quiet setting available.

lib/lib_ssl/IniFile-Tasmota/LICENSE

@@ -0,0 +1,504 @@
+GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+(This is the first released version of the Lesser GPL.  It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.)
+
+                            Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it.  You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations below.
+
+  When we speak of free software, we are referring to freedom of use,
+not price.  Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+  To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights.  These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  To protect each distributor, we want to make it very clear that
+there is no warranty for the free library.  Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+
+  Finally, software patents pose a constant threat to the existence of
+any free program.  We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder.  Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+  Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License.  This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License.  We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+  When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library.  The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom.  The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+  We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License.  It also provides other free software developers Less
+of an advantage over competing non-free programs.  These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries.  However, the Lesser license provides advantages in certain
+special circumstances.
+
+  For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it becomes
+a de-facto standard.  To achieve this, non-free programs must be
+allowed to use the library.  A more frequent case is that a free
+library does the same job as widely used non-free libraries.  In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+  In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software.  For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+  Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+
+                  GNU LESSER GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+  6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Use a suitable shared library mechanism for linking with the
+    Library.  A suitable mechanism is one that (1) uses at run time a
+    copy of the library already present on the user's computer system,
+    rather than copying library functions into the executable, and (2)
+    will operate properly with a modified version of the library, if
+    the user installs one, as long as the modified version is
+    interface-compatible with the version that the work was made with.
+
+    c) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    d) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    e) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded.  In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+                            NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+                     END OF TERMS AND CONDITIONS
+
+           How to Apply These Terms to Your New Libraries
+
+  If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change.  You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+  To apply these terms, attach the following notices to the library.  It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+    {description}
+    Copyright (C) {year} {fullname}
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301
+    USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the
+  library `Frob' (a library for tweaking knobs) written by James Random
+  Hacker.
+
+  {signature of Ty Coon}, 1 April 1990
+  Ty Coon, President of Vice
+
+That's all there is to it!

lib/lib_ssl/IniFile-Tasmota/README.md

@@ -0,0 +1,101 @@
+# IniFile
+
+IniFile is an Arduino library for reading ini files. The format is
+similar to that seen in Microsoft `.ini` files but the implementation
+is completely independent. IniFile is designed to use minimal memory
+requirements, and the only buffer used is one supplied by the user,
+thus the user remains in charge of memory usage.
+
+The ini file is separated into sections, where the section names are
+written inside square brackets. If you don't wish to use sections then
+pass a `NULL` pointer for the section name. Under each section are a
+set of key-value pairs, separated by an equals sign (`=`). Spaces
+around keys and values are ignored, but extra spaces inside the key
+are significant. Whitespace inside the value string is preserved; if
+leading or trailing whitespace is important you must quote the value
+string inside the ini file, and you must strip out the quotes
+yourself. If multiple entries for the same key exist inside the
+selected section (if using) then only the first value is returned. If
+a section is defined more than once only the first is used. The .ini
+file can contain comments, which begin with a semicolon (`;`) or hash
+(`#`). The user-supplied buffer must be large enough to accomodate the
+longest line in the file.
+
+## Example file format
+
+    ; Semi-colon comment
+    [network]
+    mac = 01:23:45:67:89:AB
+    
+    # hash comment, leading spaces below
+     gateway = 192.168.1.1
+    
+    # extraneous spaces before and after key and value
+     ip   =   192.168.1.2             
+    
+    hosts allow = example.com
+    
+    # A similarly-named section
+    [network2]
+    mac = ee:ee:ee:ee:ee:ee
+    subnet mask=255.255.255.0
+    
+    ; Extra whitespace around the key and value is permitted
+    ; (and ignored)
+      hosts allow =    sloppy.example.com  
+    
+    [misc]
+    
+    string = 123456789012345678901234567890123456789001234567890
+    string2 = a string with spaces in it
+    
+    ; This section is a repeat of en existing section and will be ignored.
+    [network]
+    mac = 01:23:45:67:89:ab
+    ip = 192.168.1.2
+    gateway = 192.168.1.1
+    
+
+## Write support
+
+Write support is a feature that has been requested on several
+occasions but as I am no longer using the IniFile library I will not
+add this feature. For anyone planning to add such support the
+information below may be useful.
+
+One goal of the `IniFile` implementation was to limit the amount of
+memory required. For use in embedded systems `malloc` and `new` are
+deliberately not used. Another goal was that tasks which take a longer
+duration were broken down into smaller chunks of work, eg
+`IniFile::getValue(const char* section, const char* key, char* buffer,
+int len, IniFileState &state)`. This was because I wanted my `WwwServer`
+library, which uses `IniFile`, to avoid interfering with time-critical
+code.
+
+I don't think that write support can meet the time-critical goal but
+that doesn't prevent its inclusion. I think the way I would choose to
+implement write support is to use `IniFile::findKey()` to find where the
+desired key is located in the file. I'd then copy everything up to
+that point to a temporary file, insert a line for the value and new
+key, skip the current line in the existing file (using
+`IniFile::readline()`) and then write out the reminder of the existing
+file into the temporary file. I'd like to move or rename the temporary
+file over the existing file but the Arduino SD library doesn't provide
+this functionality; I'd probably just copy the temporary file over the
+old one and then delete the temporary one.
+
+The code has been written under a standard Linux environment, using a
+compatibility header file to mimic the SD library. This was far more
+convenient than doing everything on the Arduino and enabled me to use
+`gdb` to debug the code and core dumps. You'll find `arduino_compat.h`
+inside the test directory, along with a `Makefile` which can be used for
+regression testing. Any proposed changes must pass the regression
+tests.
+
+## Contributors
+
+  * [Steve Marple](https://github.com/stevemarple)
+  * [per1234](https://github.com/per1234)
+  * [OscarVanL](https://github.com/OscarVanL)
+  * [MikuX2](https://github.com/toybox01)
+  * [kaixxx](https://github.com/kaixxx)

lib/lib_ssl/IniFile-Tasmota/examples/IniBrowseExample/IniBrowseExample.ino

@@ -0,0 +1,135 @@
+#include <SD.h>
+
+#include <SPI.h>
+#include <IPAddress.h>
+#include <IniFile.h>
+
+// The select pin used for the SD card
+#define SD_SELECT 10
+//#define ETHERNET_SELECT 10
+
+void printErrorMessage(uint8_t e, bool eol = true)
+{
+  switch (e) {
+  case IniFile::errorNoError:
+    Serial.print("no error");
+    break;
+  case IniFile::errorFileNotFound:
+    Serial.print("file not found");
+    break;
+  case IniFile::errorFileNotOpen:
+    Serial.print("file not open");
+    break;
+  case IniFile::errorBufferTooSmall:
+    Serial.print("buffer too small");
+    break;
+  case IniFile::errorSeekError:
+    Serial.print("seek error");
+    break;
+  case IniFile::errorSectionNotFound:
+    Serial.print("section not found");
+    break;
+  case IniFile::errorKeyNotFound:
+    Serial.print("key not found");
+    break;
+  case IniFile::errorEndOfFile:
+    Serial.print("end of file");
+    break;
+  case IniFile::errorUnknownError:
+    Serial.print("unknown error");
+    break;
+  default:
+    Serial.print("unknown error value");
+    break;
+  }
+  if (eol)
+    Serial.println();
+}
+
+void setup()
+{
+  // Configure all of the SPI select pins as outputs and make SPI
+  // devices inactive, otherwise the earlier init routines may fail
+  // for devices which have not yet been configured.
+  pinMode(SD_SELECT, OUTPUT);
+  digitalWrite(SD_SELECT, HIGH); // disable SD card
+  
+//  pinMode(ETHERNET_SELECT, OUTPUT);
+//  digitalWrite(ETHERNET_SELECT, HIGH); // disable Ethernet
+
+  const size_t bufferLen = 80;
+  char buffer[bufferLen];
+
+  const char *filename = "/lunch.ini";
+  Serial.begin(9600);
+  SPI.begin();
+  if (!SD.begin(SD_SELECT))
+    while (1)
+      Serial.println("SD.begin() failed");
+  
+  IniFile ini(filename);
+  if (!ini.open()) {
+    Serial.print("Ini file ");
+    Serial.print(filename);
+    Serial.println(" does not exist");
+    // Cannot do anything else
+    while (1)
+      ;
+  }
+  Serial.println("Ini file exists");
+
+  // Check the file is valid. This can be used to warn if any lines
+  // are longer than the buffer.
+  if (!ini.validate(buffer, bufferLen)) {
+    Serial.print("ini file ");
+    Serial.print(ini.getFilename());
+    Serial.print(" not valid: ");
+    printErrorMessage(ini.getError());
+    // Cannot do anything else
+    while (1)
+      ;
+  }
+  
+  // Browse through all sections and print contents:
+  IniFileState state;
+  char sectName[bufferLen];
+  Serial.println();
+
+  while (ini.browseSections(sectName, bufferLen, state)) {
+    Serial.print("> ");
+    Serial.print(sectName);
+
+    if (ini.getValue(sectName, "meal", buffer, bufferLen)) { 
+      Serial.print(" eats ");
+      Serial.print(buffer);
+    } else
+      Serial.print(" eats nothing");
+
+    if (ini.getValue(sectName, "drinks", buffer, bufferLen)) { 
+      Serial.print(", drinks ");
+      Serial.print(buffer);
+    } else
+      Serial.print(", drinks nothing");
+
+    if (ini.getValue(sectName, "dessert", buffer, bufferLen)) { 
+      Serial.print(" and has ");
+      Serial.print(buffer);
+      Serial.println(" for dessert.");
+    } else
+      Serial.println(" and has no dessert.");
+  }
+
+  // finished!
+  Serial.println();
+  printErrorMessage(ini.getError());
+  // Cannot do anything else
+  while (1)
+     ;
+}
+
+
+void loop()
+{
+
+
+}

lib/lib_ssl/IniFile-Tasmota/examples/IniBrowseExample/README.md

@@ -0,0 +1,35 @@
+# IniFile browsing example
+
+Shows how to browse through an ini file with an unknown number of sections
+which all contain the same elements. This can be useful to store different 
+profiles which are selectable on your device.
+
+
+## Instructions for use
+
+  * Copy the `lunch.ini` file to the root directory of your (micro)SD card.
+  * Modify the `IniBrowseExample.ino` file so that `SD_SELECT` defines
+  the correct pin number.
+  * Compile and upload the sketch. 
+
+
+## Expected output
+
+It may take a few seconds from the sketch starting before anything is
+printed to the serial port, be patient. If the sketch runs correctly
+the output should appear as below:
+
+    Ini file exists
+
+    > Karen eats burger, drinks beer and has chocolate for dessert.
+    > Peter eats falafel, drinks tea without milk and has vegan icecream for dessert.
+    > Noel eats sushi, drinks water and has no dessert.
+    > Jessica eats sandwich, drinks nothing and has muffin for dessert.
+
+    end of file
+
+If the SD card is missing or cannot be read the sketch will print:
+
+    SD.begin() failed
+
+

lib/lib_ssl/IniFile-Tasmota/examples/IniBrowseExample/lunch.ini

@@ -0,0 +1,22 @@
+; A list of settings/profiles stored as sections.
+; Each profile has the same elements.
+
+[Karen]
+meal = burger
+drinks = beer
+dessert = chocolate
+
+[Peter]
+meal = falafel
+drinks = tea without milk
+dessert = vegan icecream
+
+[Noel]
+meal = sushi
+drinks = water
+; note: dessert is missing here
+
+[Jessica]
+meal = sandwich
+; no drinks
+dessert = muffin

lib/lib_ssl/IniFile-Tasmota/examples/IniFileExample/IniFileExample.ino

@@ -0,0 +1,143 @@
+#include <SD.h>
+
+#include <SPI.h>
+#include <IPAddress.h>
+#include <IniFile.h>
+
+// The select pin used for the SD card
+//#define SD_SELECT 4
+#define SD_SELECT 22
+#define ETHERNET_SELECT 10
+
+void printErrorMessage(uint8_t e, bool eol = true)
+{
+  switch (e) {
+  case IniFile::errorNoError:
+    Serial.print("no error");
+    break;
+  case IniFile::errorFileNotFound:
+    Serial.print("file not found");
+    break;
+  case IniFile::errorFileNotOpen:
+    Serial.print("file not open");
+    break;
+  case IniFile::errorBufferTooSmall:
+    Serial.print("buffer too small");
+    break;
+  case IniFile::errorSeekError:
+    Serial.print("seek error");
+    break;
+  case IniFile::errorSectionNotFound:
+    Serial.print("section not found");
+    break;
+  case IniFile::errorKeyNotFound:
+    Serial.print("key not found");
+    break;
+  case IniFile::errorEndOfFile:
+    Serial.print("end of file");
+    break;
+  case IniFile::errorUnknownError:
+    Serial.print("unknown error");
+    break;
+  default:
+    Serial.print("unknown error value");
+    break;
+  }
+  if (eol)
+    Serial.println();
+}
+
+void setup()
+{
+  // Configure all of the SPI select pins as outputs and make SPI
+  // devices inactive, otherwise the earlier init routines may fail
+  // for devices which have not yet been configured.
+  pinMode(SD_SELECT, OUTPUT);
+  digitalWrite(SD_SELECT, HIGH); // disable SD card
+  
+  pinMode(ETHERNET_SELECT, OUTPUT);
+  digitalWrite(ETHERNET_SELECT, HIGH); // disable Ethernet
+
+  const size_t bufferLen = 80;
+  char buffer[bufferLen];
+
+  const char *filename = "/net.ini";
+  Serial.begin(9600);
+  SPI.begin();
+  if (!SD.begin(SD_SELECT))
+    while (1)
+      Serial.println("SD.begin() failed");
+  
+  IniFile ini(filename);
+  if (!ini.open()) {
+    Serial.print("Ini file ");
+    Serial.print(filename);
+    Serial.println(" does not exist");
+    // Cannot do anything else
+    while (1)
+      ;
+  }
+  Serial.println("Ini file exists");
+
+  // Check the file is valid. This can be used to warn if any lines
+  // are longer than the buffer.
+  if (!ini.validate(buffer, bufferLen)) {
+    Serial.print("ini file ");
+    Serial.print(ini.getFilename());
+    Serial.print(" not valid: ");
+    printErrorMessage(ini.getError());
+    // Cannot do anything else
+    while (1)
+      ;
+  }
+  
+  // Fetch a value from a key which is present
+  if (ini.getValue("network", "mac", buffer, bufferLen)) {
+    Serial.print("section 'network' has an entry 'mac' with value ");
+    Serial.println(buffer);
+  }
+  else {
+    Serial.print("Could not read 'mac' from section 'network', error was ");
+    printErrorMessage(ini.getError());
+  }
+  
+  // Try fetching a value from a missing key (but section is present)
+  if (ini.getValue("network", "nosuchkey", buffer, bufferLen)) {
+    Serial.print("section 'network' has an entry 'nosuchkey' with value ");
+    Serial.println(buffer);
+  }
+  else {
+    Serial.print("Could not read 'nosuchkey' from section 'network', error was ");
+    printErrorMessage(ini.getError());
+  }
+  
+  // Try fetching a key from a section which is not present
+  if (ini.getValue("nosuchsection", "nosuchkey", buffer, bufferLen)) {
+    Serial.print("section 'nosuchsection' has an entry 'nosuchkey' with value ");
+    Serial.println(buffer);
+  }
+  else {
+    Serial.print("Could not read 'nosuchkey' from section 'nosuchsection', error was ");
+    printErrorMessage(ini.getError());
+  }
+
+  // Fetch a boolean value
+  bool allowPut; // variable where result will be stored
+  bool found = ini.getValue("/upload", "allow put", buffer, bufferLen, allowPut);
+  if (found) {
+    Serial.print("The value of 'allow put' in section '/upload' is ");
+    // Print value, converting boolean to a string
+    Serial.println(allowPut ? "TRUE" : "FALSE");
+  }
+  else {
+    Serial.print("Could not get the value of 'allow put' in section '/upload': ");
+    printErrorMessage(ini.getError());
+  }
+}
+
+
+void loop()
+{
+
+
+}

lib/lib_ssl/IniFile-Tasmota/examples/IniFileExample/README.md

@@ -0,0 +1,29 @@
+# IniFile example
+
+## Instructions for use
+
+  * Copy the `net.ini` file to the root directory of your (micro)SD card.
+  * Modify the `IniFileExample.ino` file so that `SD_SELECT` defines
+  the correct pin number.
+  * Compile and upload the sketch. 
+
+
+## Expected output
+
+It may take a few seconds from the sketch starting before anything is
+printed to the serial port, be patient. If the sketch runs correctly
+the output should appear as below:
+
+
+    Ini file exists
+    section 'network' has an entry 'mac' with value 01:23:45:67:89:AB
+    Could not read 'nosuchkey' from section 'network', error was key not found
+    Could not read 'nosuchkey' from section 'nosuchsection', error was section not found
+    The value of 'allow put' in section '/upload' is TRUE
+
+
+If the SD card is missing or cannot be read the sketch will print:
+
+    SD.begin() failed
+
+

lib/lib_ssl/IniFile-Tasmota/examples/IniFileExample/net.ini

@@ -0,0 +1,68 @@
+; Semi-colon comment
+[network]
+mac = 01:23:45:67:89:AB
+
+# hash comment, leading spaces below
+ gateway = 192.168.1.1
+
+# extraneous spaces before and after key and value
+ ip   =   192.168.1.2             
+
+hosts allow = example.com
+
+# A similarly-named section
+[network2]
+mac = ee:ee:ee:ee:ee:ee
+subnet mask=255.255.255.0
+
+; Test extra whitespace in keys and value
+hosts allow = sloppy.example.com  
+
+[misc]
+
+string = 123456789012345678901234567890123456789001234567890
+string2 = a string with spaces in it
+
+; ini file for WwwServerExample
+
+[mime types]
+default = text/plain
+htm = text/html
+bin = application/octet-stream
+pdf = application/pdf
+
+[/]
+; no access to root of SD filesystem
+handler = default
+error document 403 = /errordoc/403.htm
+
+[/www.ini]
+handler = default
+
+[/data]
+handler = default
+
+[/data/private]
+; Block access to this directory
+handler = prohibit
+error document 403 = /data/private/403.htm
+
+[/data/noaccess.txt]
+; Block access to this file
+handler = prohibit
+
+[/status]
+; built-in status handler
+handler = status
+
+[/cgi]
+; User-defined handler
+handler = cgi
+
+[/src]
+; A redirect
+handler = temporary redirect
+location = http://github.com/stevemarple/WwwServer
+
+[/upload]
+allow put = true

lib/lib_ssl/IniFile-Tasmota/library.properties

@@ -0,0 +1,9 @@
+name=IniFile
+version=1.3.0+tasmota
+author=Steve Marple <stevemarple@googlemail.com>, Stephan Hadiger
+maintainer=Steve Marple <stevemarple@googlemail.com>, Stephan Hadiger
+sentence=Library to read and parse .ini files, adapted for Tasmota
+paragraph=IniFile is a library to read and parse .ini files as used by Microsoft Windows. IniFile is designed to use minimal memory requirements, and the only buffer used is one supplied by the user, thus the user remains in charge of memory usage. GNU LGPL v2.1.
+category=Other
+url=https://github.com/stevemarple/IniFile
+architectures=*

lib/lib_ssl/IniFile-Tasmota/src/IniFile.cpp

@@ -0,0 +1,498 @@
+#include "IniFile.h"
+
+#include <Arduino.h>
+#include "base64.hpp"
+
+//**************************************************************************************************************
+// enable AddLog support within a C++ library
+extern void AddLog(uint32_t loglevel, PGM_P formatP, ...);
+enum LoggingLevels {LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE};
+//**************************************************************************************************************
+
+extern FS *ffsp;
+
+IniFile::IniFile(File &file)
+{
+	_file = file;
+}
+
+IniFile::~IniFile()
+{
+	//if (_file)
+	//  _file.close();
+}
+
+IniFile::error_t IniFile::getError(void)
+{
+	return _error;
+}
+
+void IniFile::clearError(void)
+{
+	_error = errorNoError;
+}
+
+bool IniFile::getValue(const char* section, const char* key, IniFileState &state)
+{
+	char *cp = nullptr;
+	char *bufptr = buffer;
+	bool done = false;
+	if (!_file) {
+		_error = errorFileNotOpen;
+		return true;
+	}
+
+	switch (state.getValueState) {
+	case IniFileState::funcUnset:
+		state.getValueState = (section == NULL ? IniFileState::funcFindKey
+							   : IniFileState::funcFindSection);
+		state.readLinePosition = 0;
+		break;
+
+	case IniFileState::funcFindSection:
+		if (findSection(section, state)) {
+			if (_error != errorNoError)
+				return true;
+			state.getValueState = IniFileState::funcFindKey;
+		}
+		break;
+
+	case IniFileState::funcFindKey:
+		if (findKey(section, key, &cp, state)) {
+			if (_error != errorNoError)
+				return true;
+			// Found key line in correct section
+			cp = skipWhiteSpace(cp);
+			removeTrailingWhiteSpace(cp);
+
+			// Copy from cp to buffer, but the strings overlap so strcpy is out
+			while (*cp != '\0')
+				*bufptr++ = *cp++;
+			*bufptr = '\0';
+			return true;
+		}
+		break;
+
+	default:
+		// How did this happen?
+		_error = errorUnknownError;
+		done = true;
+		break;
+	}
+
+	return done;
+}
+
+bool IniFile::getValue(const char* section, const char* key)
+{
+	IniFileState state;
+	while (!getValue(section, key, state))
+		;
+	return _error == errorNoError;
+}
+
+
+bool IniFile::getValueStr(const char* section, const char* key, char *value, size_t vlen)
+{
+	if (!getValue(section, key)) return false; // error
+	if (strlen(buffer) >= vlen) return false;
+	strcpy(value, buffer);
+	return true;
+}
+
+bool IniFile::getValueString(const char* section, const char* key, String &value)
+{
+	if (!getValue(section, key)) return false; // error
+	value = buffer;
+	return true;
+}
+
+
+// For true accept: true, yes, 1
+// For false accept: false, no, 0
+bool IniFile::getValueBool(const char* section, const char* key, bool& val)
+{
+	if (!getValue(section, key))
+		return false; // error
+
+	if (strcasecmp_P(buffer, PSTR("true")) == 0 ||
+		strcasecmp_P(buffer, PSTR("yes")) == 0 ||
+		strcasecmp_P(buffer, PSTR("1")) == 0) {
+		val = true;
+		return true;
+	}
+	if (strcasecmp_P(buffer, PSTR("false")) == 0 ||
+		strcasecmp_P(buffer, PSTR("no")) == 0 ||
+		strcasecmp_P(buffer, PSTR("0")) == 0) {
+		val = false;
+		return true;
+	}
+	return false; // does not match any known strings
+}
+
+bool IniFile::getValueInt(const char* section, const char* key, int32_t& val)
+{
+	if (!getValue(section, key)) return false; // error
+	val = atoi(buffer);
+	return true;
+}
+
+bool IniFile::getValueUInt16(const char* section, const char* key, uint16_t& val)
+{
+	int32_t val32;
+	if (!getValue(section, key)) return false; // error
+	val32 = atoi(buffer);
+	if (val32 < 0 || val32 > 65535) return false;
+	val = (uint16_t) val32;
+	return true;
+
+}
+
+bool IniFile::getValueFloat(const char* section, const char* key, float & val)
+{
+	if (!getValue(section, key))
+		return false; // error
+
+	char *endptr;
+	float tmp = strtod(buffer, &endptr);
+	if (endptr == buffer)
+		return false; // no conversion
+	if (*endptr == '\0') {
+		val = tmp;
+		return true; // valid conversion
+	}
+	// buffer has trailing non-numeric characters, and since the buffer
+	// already had whitespace removed discard the entire results
+	return false;
+}
+
+bool IniFile::getIPAddress(const char* section, const char* key, ip_addr_t *ip)
+{
+	if (!getValue(section, key)) return false; // error
+	IPAddress ipaddr;
+	if (!ipaddr.fromString(buffer)) { return false; }
+#ifdef ESP32
+	ipaddr.to_ip_addr_t(ip);
+#else
+	*ip = ipaddr;
+#endif
+	return true;
+}
+
+bool IniFile::getMACAddress(const char* section, const char* key,
+							uint8_t mac[6])
+{
+	// Need 18 chars: 6 * 2 hex digits, 5 : or - and a null char
+	if (bufferLen < 18)
+		return false;
+
+	if (!getValue(section, key))
+		return false; // error
+
+	int i = 0;
+	char* cp = buffer;
+	memset(mac, 0, 6);
+
+	while (*cp != '\0' && i < 6) {
+		if (*cp == ':' || *cp == '-') {
+			++i;
+			++cp;
+			continue;
+		}
+		if (isdigit(*cp)) {
+			mac[i] *= 16; // working in hex!
+			mac[i] += (*cp - '0');
+		}
+		else {
+			if (isxdigit(*cp)) {
+				mac[i] *= 16; // working in hex!
+				mac[i] += (toupper(*cp) - 55); // convert A to 0xA, F to 0xF
+			}
+			else {
+				memset(mac, 0, 6);
+				return false;
+			}
+		}
+		++cp;
+	}
+	return true;
+}
+
+bool IniFile::getValueBase64(const char* section, const char* key, uint8_t *value, size_t vlen)
+{
+	if (!getValue(section, key)) return false; // error
+	size_t len = decode_base64_length((unsigned char*)buffer);
+	if (len != vlen) return false;
+	len = decode_base64((unsigned char*)buffer, value);
+	return true;
+}
+
+bool IniFile::parseCIDR(String& cidr, ip_addr_t *ip, ip_addr_t *mask)
+{
+	int32_t slash = cidr.indexOf('/');
+	if (slash < 0) { return false; }
+	IPAddress ipaddr;
+	if (!ipaddr.fromString(cidr.substring(0, slash))) { return false; }
+#ifdef ESP32
+	ipaddr.to_ip_addr_t(ip);
+#else
+	*ip = ipaddr;
+#endif
+
+	int32_t prefixLen = cidr.substring(slash + 1).toInt();
+	if (prefixLen < 0 || prefixLen > 32) { return false; }
+	IPAddress maskaddr((prefixLen <= 0) ? 0 : (0xFFFFFFFF >> (32 - prefixLen)));
+#ifdef ESP32
+	maskaddr.to_ip_addr_t(mask);
+#else
+	*mask = maskaddr;
+#endif
+	return true;
+}
+
+bool IniFile::getCIDR(const char* section, const char* key, ip_addr_t *ip, ip_addr_t *mask)
+{
+	String cidr;
+	if (!getValueString(section, key, cidr)) return false; // error
+	return parseCIDR(cidr, ip, mask);
+}
+
+bool IniFile::getDomainPort(const char* section, const char* key, String &domain, uint16_t &port, uint16_t default_port)
+{
+	if (!getValueString(section, key, domain)) return false; // error
+	int32_t colon = domain.indexOf(':');
+	if (colon == 0) { return false; }			// having an empty domain is wrong
+	if (colon > 0) {
+		port = domain.substring(colon + 1).toInt();
+		domain = domain.substring(0, colon);
+	} else {
+		port = default_port;
+	}
+	return true;
+}
+
+// From the file location saved in 'state' look for the next section and read its name.
+// The name will be in the buffer. Returns false if no section found. 
+bool IniFile::browseSections(IniFileState &state)
+{
+	error_t err = errorNoError;
+	char *bufptr = &buffer[0];
+	
+	do {
+		err = IniFile::readLine(_file, state.readLinePosition);
+		
+		if (err != errorNoError) {
+			// end of file or other error
+			_error = err;
+			return false;
+		} else { 
+			char *cp = skipWhiteSpace(buffer);
+
+			if (*cp == '[') {
+				// Found a section, read the name
+				++cp;
+				cp = skipWhiteSpace(cp);
+				char *ep = strchr(cp, ']');
+				if (ep != NULL) {
+					*ep = '\0'; // make ] be end of string
+					removeTrailingWhiteSpace(cp);
+					// Copy from cp to buffer, but the strings overlap so strcpy is out
+					while (*cp != '\0')
+						*bufptr++ = *cp++;
+					*bufptr = '\0';
+					_error = errorNoError;
+					return true;
+				}
+			}
+		}
+		// continue searching
+	} while (err == errorNoError);
+	
+	// we should never get here...
+	_error = err;
+	return false;
+}
+
+IniFile::error_t IniFile::readLine(File &file, uint32_t &pos)
+{
+	if (!file)
+		return errorFileNotOpen;
+
+	if (bufferLen < 3)
+		return errorBufferTooSmall;
+
+	if (!file.seek(pos))
+		return errorSeekError;
+
+	size_t bytesRead = file.readBytes(buffer, bufferLen);
+	if (!bytesRead) {
+		buffer[0] = '\0';
+		//return 1; // done
+		return errorEndOfFile;
+	}
+
+	for (size_t i = 0; i < bytesRead && i < bufferLen-1; ++i) {
+		// Test for '\n' with optional '\r' too
+		// if (endOfLineTest(i, '\n', '\r')
+
+		if (buffer[i] == '\n' || buffer[i] == '\r') {
+			char match = buffer[i];
+			char otherNewline = (match == '\n' ? '\r' : '\n');
+			// end of line, discard any trailing character of the other sort
+			// of newline
+			buffer[i] = '\0';
+
+			if (buffer[i+1] == otherNewline)
+				++i;
+			pos += (i + 1); // skip past newline(s)
+			//return (i+1 == bytesRead && !file.available());
+			return errorNoError;
+		}
+	}
+	if (!file.available()) {
+		// end of file without a newline
+		buffer[bytesRead] = '\0';
+		// return 1; //done
+		return errorEndOfFile;
+	}
+
+	buffer[bufferLen-1] = '\0'; // terminate the string
+	return errorBufferTooSmall;
+}
+
+bool IniFile::isCommentChar(char c)
+{
+	return (c == ';' || c == '#');
+}
+
+char* IniFile::skipWhiteSpace(char* str)
+{
+	char *cp = str;
+	if (cp)
+		while (isspace(*cp))
+			++cp;
+	return cp;
+}
+
+void IniFile::removeTrailingWhiteSpace(char* str)
+{
+	if (str == nullptr)
+		return;
+	char *cp = str + strlen(str) - 1;
+	while (cp >= str && isspace(*cp))
+		*cp-- = '\0';
+}
+
+bool IniFile::findSection(const char* section, IniFileState &state)
+{
+	if (section == NULL) {
+		_error = errorSectionNotFound;
+		return true;
+	}
+
+	error_t err = IniFile::readLine(_file, state.readLinePosition);
+
+	if (err != errorNoError && err != errorEndOfFile) {
+		// Signal to caller to stop looking and any error value
+		_error = err;
+		return true;
+	}
+
+	char *cp = skipWhiteSpace(buffer);
+	//if (isCommentChar(*cp))
+	//return (done ? errorSectionNotFound : 0);
+	if (isCommentChar(*cp)) {
+		// return (err == errorEndOfFile ? errorSectionNotFound : errorNoError);
+		if (err == errorEndOfFile) {
+			_error = errorSectionNotFound;
+			return true;
+		}
+		else
+			return false; // Continue searching
+	}
+
+	if (*cp == '[') {
+		// Start of section
+		++cp;
+		cp = skipWhiteSpace(cp);
+		char *ep = strchr(cp, ']');
+		if (ep != NULL) {
+			*ep = '\0'; // make ] be end of string
+			removeTrailingWhiteSpace(cp);
+			if (strcmp(cp, section) == 0) {
+				_error = errorNoError;
+				return true;
+			}
+		}
+	}
+
+	// Not a valid section line
+	//return (done ? errorSectionNotFound : 0);
+	if (err == errorEndOfFile) {
+		_error = errorSectionNotFound;
+		return true;
+	}
+
+	return false;
+}
+
+// From the current file location look for the matching key. If
+// section is non-NULL don't look in the next section
+bool IniFile::findKey(const char* section, const char* key,
+					  char** keyptr,
+					  IniFileState &state)
+{
+	if (key == NULL || *key == '\0') {
+		_error = errorKeyNotFound;
+		return true;
+	}
+
+	error_t err = IniFile::readLine(_file, state.readLinePosition);
+	if (err != errorNoError && err != errorEndOfFile) {
+		_error = err;
+		return true;
+	}
+
+	char *cp = skipWhiteSpace(buffer);
+	// if (isCommentChar(*cp))
+	//   return (done ? errorKeyNotFound : 0);
+	if (isCommentChar(*cp)) {
+		if (err == errorEndOfFile) {
+			_error = errorKeyNotFound;
+			return true;
+		}
+		else
+			return false; // Continue searching
+	}
+
+	if (section && *cp == '[') {
+		// Start of a new section
+		_error = errorKeyNotFound;
+		return true;
+	}
+
+	// Find '='
+	char *ep = strchr(cp, '=');
+	if (ep != NULL) {
+		*ep = '\0'; // make = be the end of string
+		removeTrailingWhiteSpace(cp);
+		if (strcmp(cp, key) == 0) {
+			*keyptr = ep + 1;
+			_error = errorNoError;
+			return true;
+		}
+	}
+
+	// Not the valid key line
+	if (err == errorEndOfFile) {
+		_error = errorKeyNotFound;
+		return true;
+	}
+	return false;
+}
+
+IniFileState::IniFileState()
+{
+	readLinePosition = 0;
+	getValueState = funcUnset;
+}

lib/lib_ssl/IniFile-Tasmota/src/IniFile.h

@@ -0,0 +1,117 @@
+#ifndef _INIFILE_H
+#define _INIFILE_H
+
+#include <stdint.h>
+
+#include <FS.h>
+#include "IPAddress.h"
+
+#define INIFILE_VERSION "1.3.0"
+
+class IniFileState;
+
+class IniFile {
+public:
+
+	enum error_t {
+		errorNoError = 0,
+		errorFileNotFound,
+		errorFileNotOpen,
+		errorBufferTooSmall,
+		errorSeekError,
+		errorSectionNotFound,
+		errorKeyNotFound,
+		errorEndOfFile,
+		errorUnknownError,
+	};
+
+	// Create an IniFile object. It isn't opened until open() is called on it.
+	IniFile(File &file);
+	~IniFile();
+
+	error_t getError(void);
+	void clearError(void);
+
+	// Get value from the file, but split into many short tasks. Return
+	// value: false means continue, true means stop. Call getError() to
+	// find out if any error
+	bool getValue(const char* section, const char* key, IniFileState &state);
+
+	// Get value, as one big task. Return = true means value is present
+	// in buffer
+	bool getValue(const char* section, const char* key);
+
+	// Get the value as a string, storing the result in a new buffer
+	// (not the working buffer)
+	bool getValueStr(const char* section, const char* key, char *value, size_t vlen);
+	bool getValueString(const char* section, const char* key, String &value);
+
+
+	// Get a boolean value
+	bool getValueBool(const char* section, const char* key, bool& b);
+
+	// Get an integer value
+	bool getValueInt(const char* section, const char* key, int32_t& val);
+
+	// Get an uint16_t value
+	bool getValueUInt16(const char* section, const char* key, uint16_t& val);
+
+	// Get a float value
+	bool getValueFloat(const char* section, const char* key, float& val);
+
+	bool getIPAddress(const char* section, const char* key, ip_addr_t *ip);
+
+	bool getMACAddress(const char* section, const char* key,uint8_t mac[6]);
+					   
+	bool getValueBase64(const char* section, const char* key, uint8_t *value, size_t vlen);
+
+	static bool parseCIDR(String& str, ip_addr_t *ip, ip_addr_t *mask);
+	bool getCIDR(const char* section, const char* key, ip_addr_t *ip, ip_addr_t *mask);
+
+	bool getDomainPort(const char* section, const char* key, String &domain, uint16_t &port, uint16_t default_port);
+
+	// From the file location saved in 'state' look for the next section and read its name.
+	// The name will be in the buffer. Returns false if no section found. 
+	bool browseSections(IniFileState &state);
+
+	// Utility function to read a line from a file, make available to all
+	//static int8_t readLine(File &file, char *buffer, size_t len, uint32_t &pos);
+	error_t readLine(File &file, uint32_t &pos);
+	static bool isCommentChar(char c);
+	static char* skipWhiteSpace(char* str);
+	static void removeTrailingWhiteSpace(char* str);
+
+protected:
+	// True means stop looking, false means not yet found
+	bool findSection(const char* section, IniFileState &state);
+	bool findKey(const char* section, const char* key, char** keyptr, IniFileState &state);
+
+
+private:
+	String _filename;
+	error_t _error;
+	File _file;
+	static constexpr size_t bufferLen = 80;
+	char buffer[bufferLen];
+};
+
+
+class IniFileState {
+public:
+	IniFileState();
+
+private:
+	enum {funcUnset = 0,
+		  funcFindSection,
+		  funcFindKey,
+	};
+
+	uint32_t readLinePosition;
+	uint8_t getValueState;
+
+	friend class IniFile;
+};
+
+
+#endif
+

lib/lib_ssl/esp_wireguard-Tasmota/LICENSE

@@ -0,0 +1,32 @@
+Copyright (c) 2021 Kenta Ida (fuga@fugafuga.org)
+Copyright (c) 2022 Tomoyuki Sakurai (y@trombik.org)
+Copyright (c) 2023-2024 Simone Rossetto (simros85@gmail.com)
+
+The original license is below:
+Copyright (c) 2021 Daniel Hope (www.floorsense.nz)
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+  list of conditions and the following disclaimer in the documentation and/or
+  other materials provided with the distribution.
+* Neither the name of "Floorsense Ltd", "Agile Workspace Ltd" nor the names of 
+  its contributors may be used to endorse or promote products derived from this
+  software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Author: Daniel Hope <daniel.hope@smartalock.com>
+