v4.1.3

4.1.3 20170410 * Add user configuarble GPIO to module S20 Socket and Slampher * Add support for Sonoff SC (#112) * Set PWM frequency from 1000Hz to 910Hz as used on iTead Sonoff Led firmware (#122) * Set Sonoff Led unconfigured floating outputs to 0 to reduce exceptions due to power supply instabilities (#122) * Add Access Point Mac Address to Status 11 and Telemetry (#329) * Fix DS18B20 negative temperature readings (#334)
v4.1.3
2026-07-28 04:15:53 +00:00 · 2017-04-10 17:34:52 +02:00 · 2017-04-10 17:33:57 +02:00 · 2017-04-10 17:25:31 +02:00 · 2017-04-03 16:51:07 +02:00 · 2017-04-03 16:40:13 +02:00
531 changed files with 183286 additions and 2530 deletions
@@ -0,0 +1,17 @@
+# Auto detect text files and perform LF normalization
+* text=auto
+
+# Custom for Visual Studio
+*.cs     diff=csharp
+
+# Standard to msysgit
+*.doc	 diff=astextplain
+*.DOC	 diff=astextplain
+*.docx diff=astextplain
+*.DOCX diff=astextplain
+*.dot  diff=astextplain
+*.DOT  diff=astextplain
+*.pdf  diff=astextplain
+*.PDF	 diff=astextplain
+*.rtf	 diff=astextplain
+*.RTF	 diff=astextplain
@@ -1,21 +1,21 @@
 ## Sonoff-Tasmota
 Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.

-Current version is **3.9.11** - See ```sonoff/_releasenotes.ino``` for change information.
+Current version is **4.1.3** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/master/sonoff/_releasenotes.ino) for change information.

 - This version provides all (Sonoff) modules in one file and starts up with Sonoff Basic.
 - Once uploaded select module using the configuration webpage or the commands ```Modules``` and ```Module```.
 - After reboot select config menu again or use commands ```GPIOs``` and ```GPIO``` to change GPIO with desired sensor.

-<img alt="Sonoff" src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoffbasic.jpg" width="250" align="right" /> 
+<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoffbasic.jpg" width="250" align="right" />
+
 See [Wiki](https://github.com/arendst/Sonoff-Tasmota/wiki) for more information.<br />
 See [Community](https://groups.google.com/d/forum/sonoffusers) for forum and more user experience.

 The following devices are supported:
 - [iTead Sonoff Basic](http://sonoff.itead.cc/en/products/sonoff/sonoff-basic)
 - [iTead Sonoff RF](http://sonoff.itead.cc/en/products/sonoff/sonoff-rf)
- [iTead Sonoff SV](https://www.itead.cc/sonoff-sv.html)
-<img alt="Sonoff" src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff_th.jpg" width="250" align="right" /> 
+- [iTead Sonoff SV](https://www.itead.cc/sonoff-sv.html)<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff_th.jpg" width="250" align="right" />
 - [iTead Sonoff TH10/TH16 with temperature sensor](http://sonoff.itead.cc/en/products/sonoff/sonoff-th)
 - [iTead Sonoff Dual](http://sonoff.itead.cc/en/products/sonoff/sonoff-dual)
 - [iTead Sonoff Pow](http://sonoff.itead.cc/en/products/sonoff/sonoff-pow)
@@ -23,10 +23,12 @@ The following devices are supported:
 - [iTead S20 Smart Socket](http://sonoff.itead.cc/en/products/residential/s20-socket)
 - [iTead Slampher](http://sonoff.itead.cc/en/products/residential/slampher-rf)
 - [iTead Sonoff Touch](http://sonoff.itead.cc/en/products/residential/sonoff-touch)
+- [iTead Sonoff SC](http://sonoff.itead.cc/en/products/residential/sonoff-sc)
 - [iTead Sonoff Led](http://sonoff.itead.cc/en/products/appliances/sonoff-led)
+- [iTead Sonoff Dev](https://www.itead.cc/sonoff-dev.html)
 - [iTead 1 Channel Switch 5V / 12V](https://www.itead.cc/smart-home/inching-self-locking-wifi-wireless-switch.html)
 - [iTead Motor Clockwise/Anticlockwise](https://www.itead.cc/smart-home/motor-reversing-wifi-wireless-switch.html)
 - [Electrodragon IoT Relay Board](http://www.electrodragon.com/product/wifi-iot-relay-board-based-esp8266/)

-<img alt="Sonoff" src="https://github.com/arendst/arendst.github.io/blob/master/media/sonofftoucheu.jpg" height="280" align="left" /> 
-<img alt="Sonoff" src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff4ch.jpg" height="250" align="right" /> 
+<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonofftoucheu.jpg" height="280" align="left" /> 
+<img src="https://github.com/arendst/arendst.github.io/blob/master/media/sonoff4ch.jpg" height="250" align="right" /> 
@@ -0,0 +1,8 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#include "include/ArduinoJson.h"
@@ -0,0 +1,427 @@
+ArduinoJson: change log
+=======================
+
+v5.8.3
+------
+
+* Fixed an access violation in `DynamicJsonBuffer` when memory allocation fails (issue #433)
+* Added operators `==` and `!=` for two `JsonVariant`s (issue #436)
+* Fixed `JsonVariant::operator[const FlashStringHelper*]` (issue #441)
+
+v5.8.2
+------
+
+* Fixed parsing of comments (issue #421)
+* Fixed ignored `Stream` timeout (issue #422)
+* Made sure we don't read more that necessary (issue #422)
+* Fixed error when the key of a `JsonObject` is a `char[]` (issue #423)
+* Reduced code size when using `const` references
+* Fixed error with string of type `unsigned char*` (issue #428)
+* Added `deprecated` attribute on `asArray()`, `asObject()` and `asString()` (issue #420)
+
+v5.8.1
+------
+
+* Fixed error when assigning a `volatile int` to a `JsonVariant` (issue #415)
+* Fixed errors with Variable Length Arrays (issue #416)
+* Fixed error when both `ARDUINOJSON_ENABLE_STD_STREAM` and `ARDUINOJSON_ENABLE_ARDUINO_STREAM` are set to `1`
+* Fixed error "Stream does not name a type" (issue #412)
+
+v5.8.0
+------
+
+* Added operator `==` to compare `JsonVariant` and strings (issue #402)
+* Added support for `Stream` (issue #300)
+* Reduced memory consumption by not duplicating spaces and comments
+
+**BREAKING CHANGES**:
+
+`JsonBuffer::parseObject()` and  `JsonBuffer::parseArray()` have been pulled down to the derived classes `DynamicJsonBuffer` and `StaticJsonBufferBase`.
+
+This means that if you have code like:
+
+```c++
+void myFunction(JsonBuffer& jsonBuffer);
+```
+
+you need to replace it with one of the following:
+
+```c++
+void myFunction(DynamicJsonBuffer& jsonBuffer);
+void myFunction(StaticJsonBufferBase& jsonBuffer);
+template<typename TJsonBuffer> void myFunction(TJsonBuffer& jsonBuffer);
+```
+
+v5.7.3
+------
+
+* Added an `printTo(char[N])` and `prettyPrintTo(char[N])` (issue #292)
+* Added ability to set a nested value like this: `root["A"]["B"] = "C"` (issue #352)
+* Renamed `*.ipp` to `*Impl.hpp` because they were ignored by Arduino IDE (issue #396)
+
+v5.7.2
+------
+
+* Made PROGMEM available on more platforms (issue #381)
+* Fixed PROGMEM causing an exception on ESP8266 (issue #383)
+
+v5.7.1
+------
+
+* Added support for PROGMEM (issue #76)
+* Fixed compilation error when index is not an `int` (issue #381)
+
+v5.7.0
+------
+
+* Templatized all functions using `String` or `std::string`
+* Removed `ArduinoJson::String`
+* Removed `JsonVariant::defaultValue<T>()`
+* Removed non-template `JsonObject::get()` and `JsonArray.get()`
+* Fixed support for `StringSumHelper` (issue #184)
+* Replaced `ARDUINOJSON_USE_ARDUINO_STRING` by `ARDUINOJSON_ENABLE_STD_STRING` and `ARDUINOJSON_ENABLE_ARDUINO_STRING` (issue #378)
+* Added example `StringExample.ino` to show where `String` can be used
+* Increased default nesting limit to 50 when compiled for a computer (issue #349)
+
+**BREAKING CHANGES**:
+
+The non-template functions `JsonObject::get()` and `JsonArray.get()` have been removed. This means that you need to explicitely tell the type you expect in return.
+
+Old code:
+
+```c++
+#define ARDUINOJSON_USE_ARDUINO_STRING 0
+JsonVariant value1 = myObject.get("myKey");
+JsonVariant value2 = myArray.get(0);
+```
+
+New code:
+
+```c++
+#define ARDUINOJSON_ENABLE_ARDUINO_STRING 0
+#define ARDUINOJSON_ENABLE_STD_STRING 1
+JsonVariant value1 = myObject.get<JsonVariant>("myKey");
+JsonVariant value2 = myArray.get<JsonVariant>(0);
+```
+
+
+v5.6.7
+------
+
+* Fixed `array[idx].as<JsonVariant>()` and `object[key].as<JsonVariant>()`
+* Fixed return value of `JsonObject::set()` (issue #350)
+* Fixed undefined behavior in `Prettyfier` and `Print` (issue #354)
+* Fixed parser that incorrectly rejected floats containing a `+` (issue #349)
+
+v5.6.6
+------
+
+* Fixed `-Wparentheses` warning introduced in v5.6.5 (PR #335 by @nuket)
+* Added `.mbedignore` for ARM mbdeb (PR #334 by @nuket)
+* Fixed  `JsonVariant::success()` which didn't propagate `JsonArray::success()` nor `JsonObject::success()` (issue #342).
+
+v5.6.5
+------
+
+* `as<char*>()` now returns `true` when input is `null` (issue #330)
+
+v5.6.4
+------
+
+* Fixed error in float serialization (issue #324)
+
+v5.6.3
+------
+
+* Improved speed of float serialization (about twice faster)
+* Added `as<JsonArray>()` as a synonym for `as<JsonArray&>()`... (issue #291)
+* Fixed `call of overloaded isinf(double&) is ambiguous` (issue #284)
+
+v5.6.2
+------
+
+* Fixed build when another lib does `#undef isnan` (issue #284)
+
+v5.6.1
+------
+
+* Added missing `#pragma once` (issue #310)
+
+v5.6.0
+------
+
+* ArduinoJson is now a header-only library (issue #199)
+
+v5.5.1
+------
+
+* Fixed compilation error with Intel Galileo (issue #299)
+
+v5.5.0
+------
+
+* Added `JsonVariant::success()` (issue #279)
+* Renamed `JsonVariant::invalid<T>()` to `JsonVariant::defaultValue<T>()`
+
+v5.4.0
+------
+
+* Changed `::String` to `ArduinoJson::String` (issue #275)
+* Changed `::Print` to `ArduinoJson::Print` too
+
+v5.3.0
+------
+
+* Added custom implementation of `ftoa` (issues #266, #267, #269 and #270)
+* Added `JsonVariant JsonBuffer::parse()` (issue #265)
+* Fixed `unsigned long` printed as `signed long` (issue #170)
+
+v5.2.0
+------
+
+* Added `JsonVariant::as<char*>()` as a synonym for `JsonVariant::as<const char*>()` (issue #257)
+* Added example `JsonHttpClient` (issue #256)
+* Added `JsonArray::copyTo()` and `JsonArray::copyFrom()` (issue #254)
+* Added `RawJson()` to insert pregenerated JSON portions (issue #259)
+
+v5.1.1
+------
+
+* Removed `String` duplication when one replaces a value in a `JsonObject` (PR #232 by @ulion)
+
+v5.1.0
+------
+
+* Added support of `long long` (issue #171)
+* Moved all build settings to `ArduinoJson/Configuration.hpp`
+
+**BREAKING CHANGE**:
+If you defined `ARDUINOJSON_ENABLE_STD_STREAM`, you now need to define it to `1`.
+
+v5.0.8
+------
+
+* Made the library compatible with [PlatformIO](http://platformio.org/) (issue #181)
+* Fixed `JsonVariant::is<bool>()` that was incorrectly returning false (issue #214)
+
+v5.0.7
+------
+
+* Made library easier to use from a CMake project: simply `add_subdirectory(ArduinoJson/src)`
+* Changed `String` to be a `typedef` of `std::string` (issues #142 and #161)
+
+**BREAKING CHANGES**:
+- `JsonVariant(true).as<String>()` now returns `"true"` instead of `"1"`
+- `JsonVariant(false).as<String>()` now returns `"false"` instead of `"0"`
+
+v5.0.6
+------
+
+* Added parameter to `DynamicJsonBuffer` constructor to set initial size (issue #152)
+* Fixed warning about library category in Arduino 1.6.6 (issue #147)
+* Examples: Added a loop to wait for serial port to be ready (issue #156)
+
+v5.0.5
+------
+
+* Added overload `JsonObjectSuscript::set(value, decimals)` (issue #143)
+* Use `float` instead of `double` to reduce the size of `JsonVariant` (issue #134)
+
+v5.0.4
+------
+
+* Fixed ambiguous overload with `JsonArraySubscript` and `JsonObjectSubscript` (issue #122)
+
+v5.0.3
+------
+
+* Fixed `printTo(String)` which wrote numbers instead of strings (issue #120)
+* Fixed return type of `JsonArray::is<T>()` and some others (issue #121)
+
+v5.0.2
+------
+
+* Fixed segmentation fault in `parseObject(String)` and `parseArray(String)`, when the
+  `StaticJsonBuffer` is too small to hold a copy of the string
+* Fixed Clang warning "register specifier is deprecated" (issue #102)
+* Fixed GCC warning "declaration shadows a member" (issue #103)
+* Fixed memory alignment, which made ESP8266 crash (issue #104)
+* Fixed compilation on Visual Studio 2010 and 2012 (issue #107)
+
+v5.0.1
+------
+
+* Fixed compilation with Arduino 1.0.6 (issue #99)
+
+v5.0.0
+------
+
+* Added support of `String` class (issues #55, #56, #70, #77)
+* Added `JsonBuffer::strdup()` to make a copy of a string (issues #10, #57)
+* Implicitly call `strdup()` for `String` but not for `char*` (issues #84, #87)
+* Added support of non standard JSON input (issue #44)
+* Added support of comments in JSON input (issue #88)
+* Added implicit cast between numerical types (issues #64, #69, #93)
+* Added ability to read number values as string (issue #90)
+* Redesigned `JsonVariant` to leverage converting constructors instead of assignment operators (issue #66)
+* Switched to new the library layout (requires Arduino 1.0.6 or above)
+
+**BREAKING CHANGES**:
+- `JsonObject::add()` was renamed to `set()`
+- `JsonArray::at()` and `JsonObject::at()` were renamed to `get()`
+- Number of digits of floating point value are now set with `double_with_n_digits()`
+
+**Personal note about the `String` class**:
+Support of the `String` class has been added to the library because many people use it in their programs.
+However, you should not see this as an invitation to use the `String` class.
+The `String` class is **bad** because it uses dynamic memory allocation.
+Compared to static allocation, it compiles to a bigger, slower program, and is less predictable.
+You certainly don't want that in an embedded environment!
+
+v4.6
+----
+
+* Fixed segmentation fault in `DynamicJsonBuffer` when memory allocation fails (issue #92)
+
+v4.5
+----
+
+* Fixed buffer overflow when input contains a backslash followed by a terminator (issue #81)
+
+**Upgrading is recommended** since previous versions contain a potential security risk.
+
+Special thanks to [Giancarlo Canales Barreto](https://github.com/gcanalesb) for finding this nasty bug.
+
+v4.4
+----
+
+* Added `JsonArray::measureLength()` and `JsonObject::measureLength()` (issue #75)
+
+v4.3
+----
+
+* Added `JsonArray::removeAt()` to remove an element of an array (issue #58)
+* Fixed stack-overflow in `DynamicJsonBuffer` when parsing huge JSON files (issue #65)
+* Fixed wrong return value of `parseArray()` and `parseObject()` when allocation fails (issue #68)
+
+v4.2
+----
+
+* Switched back to old library layout (issues #39, #43 and #45)
+* Removed global new operator overload (issue #40, #45 and #46)
+* Added an example with EthernetServer
+
+v4.1
+----
+
+* Added DynamicJsonBuffer (issue #19)
+
+v4.0
+----
+
+* Unified parser and generator API (issue #23)
+* Updated library layout, now requires Arduino 1.0.6 or newer
+
+**BREAKING CHANGE**: API changed significantly, see [Migrating code to the new API](https://github.com/bblanchon/ArduinoJson/wiki/Migrating-code-to-the-new-API).
+
+
+v3.4
+----
+
+* Fixed escaped char parsing (issue #16)
+
+
+v3.3
+----
+
+* Added indented output for the JSON generator (issue #11), see example bellow.
+* Added `IndentedPrint`, a decorator for `Print` to allow indented output
+
+Example:
+
+    JsonOject<2> json;
+    json["key"] = "value";
+    json.prettyPrintTo(Serial);
+
+v3.2
+----
+
+* Fixed a bug when adding nested object in `JsonArray` (bug introduced in v3.1).
+
+v3.1
+----
+
+* Calling `Generator::JsonObject::add()` twice with the same `key` now replaces the `value`
+* Added `Generator::JsonObject::operator[]`, see bellow the new API
+* Added `Generator::JsonObject::remove()` (issue #9)
+
+Old generator API:
+
+	JsonObject<3> root;
+    root.add("sensor", "gps");
+    root.add("time", 1351824120);
+    root.add("data", array);
+
+New generator API:
+
+	JsonObject<3> root;
+    root["sensor"] = "gps";
+    root["time"] = 1351824120;
+    root["data"] = array;
+
+v3.0
+----
+
+* New parser API, see bellow
+* Renamed `JsonHashTable` into `JsonObject`
+* Added iterators for `JsonArray` and `JsonObject` (issue #4)
+
+Old parser API:
+
+    JsonHashTable root = parser.parseHashTable(json);
+
+	char*  sensor    = root.getString("sensor");
+	long   time      = root.getLong("time");
+	double latitude  = root.getArray("data").getDouble(0);
+    double longitude = root.getArray("data").getDouble(1);
+
+New parser API:
+
+	JsonObject root = parser.parse(json);
+
+	char*  sensor    = root["sensor"];
+    long   time      = root["time"];
+    double latitude  = root["data"][0];
+    double longitude = root["data"][1];
+
+v2.1
+----
+
+* Fixed case `#include "jsmn.cpp"` which caused an error in Linux (issue #6)
+* Fixed a buffer overrun in JSON Parser (issue #5)
+
+v2.0
+----
+
+* Added JSON encoding (issue #2)
+* Renamed the library `ArduinoJsonParser` becomes `ArduinoJson`
+
+**Breaking change**: you need to add the following line at the top of your program.
+
+	using namespace ArduinoJson::Parser;
+
+v1.2
+----
+
+* Fixed error in JSON parser example (issue #1)
+
+v1.1
+----
+
+* Example: changed `char* json` into `char[] json` so that the bytes are not write protected
+* Fixed parsing bug when the JSON contains multi-dimensional arrays
+
+v1.0
+----
+
+Initial release
@@ -0,0 +1,21 @@
+# Copyright Benoit Blanchon 2014-2017
+# MIT License
+# 
+# Arduino JSON library
+# https://github.com/bblanchon/ArduinoJson
+# If you like this project, please add a star!
+
+cmake_minimum_required(VERSION 3.0)
+project(ArduinoJson)
+
+enable_testing()
+
+set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY ${CMAKE_SOURCE_DIR}/lib)
+set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${CMAKE_SOURCE_DIR}/lib)
+set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_SOURCE_DIR}/bin)
+
+if(${COVERAGE})
+	set(CMAKE_CXX_FLAGS "-g -O0 -fprofile-arcs -ftest-coverage")
+endif()
+
+add_subdirectory(test)
@@ -0,0 +1,10 @@
+The MIT License (MIT)
+---------------------
+
+Copyright © 2014-2017 Benoit BLANCHON
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
@@ -0,0 +1,143 @@
+ArduinoJson - C++ JSON library for IoT
+====================
+
+[![Build status](https://ci.appveyor.com/api/projects/status/m7s53wav1l0abssg/branch/master?svg=true)](https://ci.appveyor.com/project/bblanchon/arduinojson/branch/master) [![Build Status](https://travis-ci.org/bblanchon/ArduinoJson.svg?branch=master)](https://travis-ci.org/bblanchon/ArduinoJson) [![Coverage Status](https://img.shields.io/coveralls/bblanchon/ArduinoJson.svg)](https://coveralls.io/r/bblanchon/ArduinoJson?branch=master) [![Star this project](http://githubbadges.com/star.svg?user=bblanchon&repo=ArduinoJson&style=flat&color=fff&background=007ec6)](https://github.com/bblanchon/ArduinoJson)
+
+*An elegant and efficient JSON library for embedded systems.*
+
+It's designed to have the most intuitive API, the smallest footprint and is able to work without any allocation on the heap (no malloc).
+
+It has been written with Arduino in mind, but it isn't linked to Arduino libraries so you can use this library in any other C++ project.
+For instance, it supports Aduino's `String` and `Stream`, but also `std::string`, `std::istream` and `std::ostream`.
+
+Features
+--------
+
+* JSON decoding (comments are supported)
+* JSON encoding (with optional indentation)
+* Elegant API, very easy to use
+* Fixed memory allocation (zero malloc)
+* No data duplication (zero copy)
+* Portable (written in C++98)
+* Self-contained (no external dependency)
+* Small footprint
+* Header-only library
+* MIT License
+
+Works on
+--------
+
+* All Arduino boards (Uno, Due, Mini, Micro, Yun...)
+* ESP8266
+* Teensy
+* Intel Edison and Galileo
+* PlatformIO
+* Energia
+* RedBearLab boards (BLE Nano...)
+* Computers (Windows, Linux, OSX...)
+
+See [FAQ: Compatibility issues](https://bblanchon.github.io/ArduinoJson/faq/compilation-fails-device-crashes-nothing-on-serial-console)
+
+Quick start
+-----------
+
+#### Decoding / Parsing
+
+```c++
+char json[] = "{\"sensor\":\"gps\",\"time\":1351824120,\"data\":[48.756080,2.302038]}";
+
+StaticJsonBuffer<200> jsonBuffer;
+
+JsonObject& root = jsonBuffer.parseObject(json);
+
+const char* sensor = root["sensor"];
+long time          = root["time"];
+double latitude    = root["data"][0];
+double longitude   = root["data"][1];
+```
+
+[See JsonParserExample.ino](examples/JsonParserExample/JsonParserExample.ino)
+
+#### Encoding / Generating
+
+```c++
+StaticJsonBuffer<200> jsonBuffer;
+
+JsonObject& root = jsonBuffer.createObject();
+root["sensor"] = "gps";
+root["time"] = 1351824120;
+
+JsonArray& data = root.createNestedArray("data");
+data.add(48.756080, 6);  // 6 is the number of decimals to print
+data.add(2.302038, 6);   // if not specified, 2 digits are printed
+
+root.printTo(Serial);
+// This prints:
+// {"sensor":"gps","time":1351824120,"data":[48.756080,2.302038]}
+```
+
+[See JsonGeneratorExample.ino](examples/JsonGeneratorExample/JsonGeneratorExample.ino)
+
+
+Documentation
+-------------
+
+The documentation is available online in the [ArduinoJson wiki](https://github.com/bblanchon/ArduinoJson/wiki).
+
+The [ArduinoJson Assistant](https://bblanchon.github.io/ArduinoJson/assistant/) helps you get started with the library.
+
+
+Testimonials
+------------
+
+From Arduino's Forum user `jflaplante`:
+> I tried aJson json-arduino before trying your library. I always ran into memory problem after a while.
+> I have no such problem so far with your library. It is working perfectly with my web services.
+
+From StackOverflow user `thegreendroid`:
+> It has a really elegant, simple API and it works like a charm on embedded and Windows/Linux platforms. We recently started using this on an embedded project and I can vouch for its quality.
+
+From GitHub user `zacsketches`:
+> Thanks for a great library!!!
+> I've been watching you consistently develop this library over the past six months, and I used it today for a publish and subscribe architecture designed to help hobbyists move into more advanced robotics. Your library allowed me to implement remote subscription in order to facilitate multi-processor robots.
+> ArduinoJson saved me a week's worth of time!!
+
+[From Reddit user `erm_what_`](https://www.reddit.com/r/arduino/comments/3jj6ep/announcing_arduinojson_50/cusjk8c):
+> This is a great library and I wouldn't be able to do the project I'm doing without it. I completely recommend it.
+
+[From Reddit user `makerhacks`](https://www.reddit.com/r/arduino/comments/3jj6ep/announcing_arduinojson_50/cusqg7b):
+> I am just starting an ESP8266 clock project and now I can output JSON from my server script and interpret it painlessly.
+
+[From Twitter user `@hemalchevli`](https://twitter.com/hemalchevli/status/715788439397011456):
+> ArduinoJson library should be used as a benchmark/reference for making libraries. Truly elegant.
+
+[From GitHub user `sticilface`](https://github.com/bblanchon/ArduinoJson/issues/381#issuecomment-260203594):
+> its a great lib:) and i use it in everything!
+
+Donators
+--------
+
+Special thanks to the following persons and companies who made generous donations to the library author:
+
+* Robert Murphy <img alt='USA' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1fa-1f1f8.svg' width='18' height='18'>
+* Surge Communications <img alt='USA' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1fa-1f1f8.svg' width='18' height='18'>
+* Alex Scott <img alt='United Kingdom' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1ec-1f1e7.svg' width='18' height='18'>
+* Firepick Services LLC <img alt='USA' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1fa-1f1f8.svg' width='18' height='18'>
+* A B Doodkorte <img alt='Netherlands' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1f3-1f1f1.svg' width='18' height='18'>
+* Scott Smith <img alt='USA' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1fa-1f1f8.svg' width='18' height='18'>
+* Johann Stieger <img alt='Austria' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1e6-1f1f9.svg' width='18' height='18'>
+* Gustavo Donizeti Gini <img alt='Brazil' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1e7-1f1f7.svg' width='18' height='18'>
+* Charles-Henri Hallard <img alt='France' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1eb-1f1f7.svg' width='18' height='18'>
+* Martijn van den Burg <img alt='Netherlands' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1f3-1f1f1.svg' width='18' height='18'>
+* Nick Koumaris <img alt='Greece' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1ec-1f1f7.svg' width='18' height='18'>
+* Jon Williams <img alt='USA' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1fa-1f1f8.svg' width='18' height='18'>
+* Kestutis Liaugminas <img alt='Lithuania' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1f1-1f1f9.svg' width='18' height='18'>
+* Darlington Adibe <img alt='Nigeria' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1f3-1f1ec.svg' width='18' height='18'>
+* Yoeri Kroon <img alt='Netherlands' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1f3-1f1f1.svg' width='18' height='18'>
+* Andrew Melvin <img alt='United Kingdom' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1ec-1f1e7.svg' width='18' height='18'>
+* Doanh Luong <img alt ='Vietnam' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1fb-1f1f3.svg' width='18' height='18'>
+* Christoph Schmidt <img alt ='Germany' src='https://cdnjs.cloudflare.com/ajax/libs/emojione/2.1.4/assets/svg/1f1e9-1f1ea.svg' width='18' height='18'>
+
+---
+
+Found this library useful? Please star this project or [help me back with a donation!](https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=donate%40benoitblanchon%2efr&lc=GB&item_name=Benoit%20Blanchon&item_number=Arduino%20JSON&currency_code=EUR&bn=PP%2dDonationsBF%3abtn_donate_LG%2egif%3aNonHosted) :smile:
@@ -0,0 +1,18 @@
+version: 5.8.3.{build}
+environment:
+  matrix:
+  - CMAKE_GENERATOR: Visual Studio 14 2015
+  - CMAKE_GENERATOR: Visual Studio 12 2013
+  - CMAKE_GENERATOR: Visual Studio 11 2012
+  - CMAKE_GENERATOR: Visual Studio 10 2010
+#  - CMAKE_GENERATOR: MinGW Makefiles
+# Note: Disabled because of unexplicated error -1073741511
+# This used to work fine with GCC 4.8.2 then failed after they upgraded to GCC 4.9.3
+configuration: Debug
+before_build:
+- set PATH=C:\MinGW\bin;%PATH:C:\Program Files\Git\usr\bin;=% # Workaround for CMake not wanting sh.exe on PATH for MinGW
+- cmake -DCMAKE_BUILD_TYPE=%CONFIGURATION% -G "%CMAKE_GENERATOR%" .
+build_script:
+- cmake --build . --config %CONFIGURATION%
+test_script:
+- ctest -V .
@@ -0,0 +1,35 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#include <ArduinoJson.h>
+
+using namespace ArduinoJson::Internals;
+
+void setup() {
+  Serial.begin(9600);
+  while (!Serial) {
+    // wait serial port initialization
+  }
+
+  IndentedPrint serial(Serial);
+  serial.setTabSize(4);
+
+  serial.println("This is at indentation 0");
+  serial.indent();
+  serial.println("This is at indentation 1");
+  serial.println("This is also at indentation 1");
+  serial.indent();
+  serial.println("This is at indentation 2");
+
+  serial.unindent();
+  serial.unindent();
+  serial.println("This is back at indentation 0");
+}
+
+void loop() {
+  // not used in this example
+}
@@ -0,0 +1,70 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#include <ArduinoJson.h>
+
+void setup() {
+  Serial.begin(9600);
+  while (!Serial) {
+    // wait serial port initialization
+  }
+
+  // Memory pool for JSON object tree.
+  //
+  // Inside the brackets, 200 is the size of the pool in bytes.
+  // If the JSON object is more complex, you need to increase that value.
+  StaticJsonBuffer<200> jsonBuffer;
+
+  // StaticJsonBuffer allocates memory on the stack, it can be
+  // replaced by DynamicJsonBuffer which allocates in the heap.
+  // It's simpler but less efficient.
+  //
+  // DynamicJsonBuffer  jsonBuffer;
+
+  // Create the root of the object tree.
+  //
+  // It's a reference to the JsonObject, the actual bytes are inside the
+  // JsonBuffer with all the other nodes of the object tree.
+  // Memory is freed when jsonBuffer goes out of scope.
+  JsonObject& root = jsonBuffer.createObject();
+
+  // Add values in the object
+  //
+  // Most of the time, you can rely on the implicit casts.
+  // In other case, you can do root.set<long>("time", 1351824120);
+  root["sensor"] = "gps";
+  root["time"] = 1351824120;
+
+  // Add a nested array.
+  //
+  // It's also possible to create the array separately and add it to the
+  // JsonObject but it's less efficient.
+  JsonArray& data = root.createNestedArray("data");
+  data.add(double_with_n_digits(48.756080, 6));
+  data.add(double_with_n_digits(2.302038, 6));
+
+  root.printTo(Serial);
+  // This prints:
+  // {"sensor":"gps","time":1351824120,"data":[48.756080,2.302038]}
+
+  Serial.println();
+
+  root.prettyPrintTo(Serial);
+  // This prints:
+  // {
+  //   "sensor": "gps",
+  //   "time": 1351824120,
+  //   "data": [
+  //     48.756080,
+  //     2.302038
+  //   ]
+  // }
+}
+
+void loop() {
+  // not used in this example
+}
@@ -0,0 +1,184 @@
+// Sample Arduino Json Web Client
+// Downloads and parse http://jsonplaceholder.typicode.com/users/1
+//
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#include <ArduinoJson.h>
+#include <Ethernet.h>
+#include <SPI.h>
+
+EthernetClient client;
+
+const char* server = "jsonplaceholder.typicode.com";  // server's address
+const char* resource = "/users/1";                    // http resource
+const unsigned long BAUD_RATE = 9600;                 // serial connection speed
+const unsigned long HTTP_TIMEOUT = 10000;  // max respone time from server
+const size_t MAX_CONTENT_SIZE = 512;       // max size of the HTTP response
+
+// The type of data that we want to extract from the page
+struct UserData {
+  char name[32];
+  char company[32];
+};
+
+// ARDUINO entry point #1: runs once when you press reset or power the board
+void setup() {
+  initSerial();
+  initEthernet();
+}
+
+// ARDUINO entry point #2: runs over and over again forever
+void loop() {
+  if (connect(server)) {
+    if (sendRequest(server, resource) && skipResponseHeaders()) {
+      UserData userData;
+      if (readReponseContent(&userData)) {
+        printUserData(&userData);
+      }
+    }
+  }
+  disconnect();
+  wait();
+}
+
+// Initialize Serial port
+void initSerial() {
+  Serial.begin(BAUD_RATE);
+  while (!Serial) {
+    ;  // wait for serial port to initialize
+  }
+  Serial.println("Serial ready");
+}
+
+// Initialize Ethernet library
+void initEthernet() {
+  byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
+  if (!Ethernet.begin(mac)) {
+    Serial.println("Failed to configure Ethernet");
+    return;
+  }
+  Serial.println("Ethernet ready");
+  delay(1000);
+}
+
+// Open connection to the HTTP server
+bool connect(const char* hostName) {
+  Serial.print("Connect to ");
+  Serial.println(hostName);
+
+  bool ok = client.connect(hostName, 80);
+
+  Serial.println(ok ? "Connected" : "Connection Failed!");
+  return ok;
+}
+
+// Send the HTTP GET request to the server
+bool sendRequest(const char* host, const char* resource) {
+  Serial.print("GET ");
+  Serial.println(resource);
+
+  client.print("GET ");
+  client.print(resource);
+  client.println(" HTTP/1.0");
+  client.print("Host: ");
+  client.println(host);
+  client.println("Connection: close");
+  client.println();
+
+  return true;
+}
+
+// Skip HTTP headers so that we are at the beginning of the response's body
+bool skipResponseHeaders() {
+  // HTTP headers end with an empty line
+  char endOfHeaders[] = "\r\n\r\n";
+
+  client.setTimeout(HTTP_TIMEOUT);
+  bool ok = client.find(endOfHeaders);
+
+  if (!ok) {
+    Serial.println("No response or invalid response!");
+  }
+
+  return ok;
+}
+
+// Parse the JSON from the input string and extract the interesting values
+// Here is the JSON we need to parse
+// {
+//   "id": 1,
+//   "name": "Leanne Graham",
+//   "username": "Bret",
+//   "email": "Sincere@april.biz",
+//   "address": {
+//     "street": "Kulas Light",
+//     "suite": "Apt. 556",
+//     "city": "Gwenborough",
+//     "zipcode": "92998-3874",
+//     "geo": {
+//       "lat": "-37.3159",
+//       "lng": "81.1496"
+//     }
+//   },
+//   "phone": "1-770-736-8031 x56442",
+//   "website": "hildegard.org",
+//   "company": {
+//     "name": "Romaguera-Crona",
+//     "catchPhrase": "Multi-layered client-server neural-net",
+//     "bs": "harness real-time e-markets"
+//   }
+// }
+bool readReponseContent(struct UserData* userData) {
+  // Compute optimal size of the JSON buffer according to what we need to parse.
+  // This is only required if you use StaticJsonBuffer.
+  const size_t BUFFER_SIZE =
+      JSON_OBJECT_SIZE(8)    // the root object has 8 elements
+      + JSON_OBJECT_SIZE(5)  // the "address" object has 5 elements
+      + JSON_OBJECT_SIZE(2)  // the "geo" object has 2 elements
+      + JSON_OBJECT_SIZE(3)  // the "company" object has 3 elements
+      + MAX_CONTENT_SIZE;    // additional space for strings
+
+  // Allocate a temporary memory pool
+  DynamicJsonBuffer jsonBuffer(BUFFER_SIZE);
+
+  JsonObject& root = jsonBuffer.parseObject(client);
+
+  if (!root.success()) {
+    Serial.println("JSON parsing failed!");
+    return false;
+  }
+
+  // Here were copy the strings we're interested in
+  strcpy(userData->name, root["name"]);
+  strcpy(userData->company, root["company"]["name"]);
+  // It's not mandatory to make a copy, you could just use the pointers
+  // Since, they are pointing inside the "content" buffer, so you need to make
+  // sure it's still in memory when you read the string
+
+  return true;
+}
+
+// Print the data extracted from the JSON
+void printUserData(const struct UserData* userData) {
+  Serial.print("Name = ");
+  Serial.println(userData->name);
+  Serial.print("Company = ");
+  Serial.println(userData->company);
+}
+
+// Close the connection with the HTTP server
+void disconnect() {
+  Serial.println("Disconnect");
+  client.stop();
+}
+
+// Pause for a 1 minute
+void wait() {
+  Serial.println("Wait 60 seconds");
+  delay(60000);
+}
@@ -0,0 +1,67 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#include <ArduinoJson.h>
+
+void setup() {
+  Serial.begin(9600);
+  while (!Serial) {
+    // wait serial port initialization
+  }
+
+  // Memory pool for JSON object tree.
+  //
+  // Inside the brackets, 200 is the size of the pool in bytes,
+  // If the JSON object is more complex, you need to increase that value.
+  StaticJsonBuffer<200> jsonBuffer;
+
+  // StaticJsonBuffer allocates memory on the stack, it can be
+  // replaced by DynamicJsonBuffer which allocates in the heap.
+  // It's simpler but less efficient.
+  //
+  // DynamicJsonBuffer  jsonBuffer;
+
+  // JSON input string.
+  //
+  // It's better to use a char[] as shown here.
+  // If you use a const char* or a String, ArduinoJson will
+  // have to make a copy of the input in the JsonBuffer.
+  char json[] =
+      "{\"sensor\":\"gps\",\"time\":1351824120,\"data\":[48.756080,2.302038]}";
+
+  // Root of the object tree.
+  //
+  // It's a reference to the JsonObject, the actual bytes are inside the
+  // JsonBuffer with all the other nodes of the object tree.
+  // Memory is freed when jsonBuffer goes out of scope.
+  JsonObject& root = jsonBuffer.parseObject(json);
+
+  // Test if parsing succeeds.
+  if (!root.success()) {
+    Serial.println("parseObject() failed");
+    return;
+  }
+
+  // Fetch values.
+  //
+  // Most of the time, you can rely on the implicit casts.
+  // In other case, you can do root["time"].as<long>();
+  const char* sensor = root["sensor"];
+  long time = root["time"];
+  double latitude = root["data"][0];
+  double longitude = root["data"][1];
+
+  // Print values.
+  Serial.println(sensor);
+  Serial.println(time);
+  Serial.println(latitude, 6);
+  Serial.println(longitude, 6);
+}
+
+void loop() {
+  // not used in this example
+}
@@ -0,0 +1,74 @@
+// Sample Arduino Json Web Server
+// Created by Benoit Blanchon.
+// Heavily inspired by "Web Server" from David A. Mellis and Tom Igoe
+
+#include <SPI.h>
+#include <Ethernet.h>
+#include <ArduinoJson.h>
+
+byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
+IPAddress ip(192, 168, 0, 177);
+EthernetServer server(80);
+
+bool readRequest(EthernetClient& client) {
+  bool currentLineIsBlank = true;
+  while (client.connected()) {
+    if (client.available()) {
+      char c = client.read();
+      if (c == '\n' && currentLineIsBlank) {
+        return true;
+      } else if (c == '\n') {
+        currentLineIsBlank = true;
+      } else if (c != '\r') {
+        currentLineIsBlank = false;
+      }
+    }
+  }
+  return false;
+}
+
+JsonObject& prepareResponse(JsonBuffer& jsonBuffer) {
+  JsonObject& root = jsonBuffer.createObject();
+
+  JsonArray& analogValues = root.createNestedArray("analog");
+  for (int pin = 0; pin < 6; pin++) {
+    int value = analogRead(pin);
+    analogValues.add(value);
+  }
+
+  JsonArray& digitalValues = root.createNestedArray("digital");
+  for (int pin = 0; pin < 14; pin++) {
+    int value = digitalRead(pin);
+    digitalValues.add(value);
+  }
+
+  return root;
+}
+
+void writeResponse(EthernetClient& client, JsonObject& json) {
+  client.println("HTTP/1.1 200 OK");
+  client.println("Content-Type: application/json");
+  client.println("Connection: close");
+  client.println();
+
+  json.prettyPrintTo(client);
+}
+
+void setup() {
+  Ethernet.begin(mac, ip);
+  server.begin();
+}
+
+void loop() {
+  EthernetClient client = server.available();
+  if (client) {
+    bool success = readRequest(client);
+    if (success) {
+      StaticJsonBuffer<500> jsonBuffer;
+      JsonObject& json = prepareResponse(jsonBuffer);
+      writeResponse(client, json);
+    }
+    delay(1);
+    client.stop();
+  }
+}
@@ -0,0 +1,55 @@
+// Send a JSON object on UDP at regular interval
+//
+// You can easily test this program with netcat:
+// $ nc -ulp 8888
+//
+// by Benoit Blanchon, MIT License 2015-2017
+
+#include <ArduinoJson.h>
+#include <Ethernet.h>
+#include <SPI.h>
+
+byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
+IPAddress localIp(192, 168, 0, 177);
+IPAddress remoteIp(192, 168, 0, 109);
+unsigned int remotePort = 8888;
+unsigned localPort = 8888;
+EthernetUDP udp;
+
+JsonObject& buildJson(JsonBuffer& jsonBuffer) {
+  JsonObject& root = jsonBuffer.createObject();
+
+  JsonArray& analogValues = root.createNestedArray("analog");
+  for (int pin = 0; pin < 6; pin++) {
+    int value = analogRead(pin);
+    analogValues.add(value);
+  }
+
+  JsonArray& digitalValues = root.createNestedArray("digital");
+  for (int pin = 0; pin < 14; pin++) {
+    int value = digitalRead(pin);
+    digitalValues.add(value);
+  }
+
+  return root;
+}
+
+void sendJson(JsonObject& json) {
+  udp.beginPacket(remoteIp, remotePort);
+  json.printTo(udp);
+  udp.println();
+  udp.endPacket();
+}
+
+void setup() {
+  Ethernet.begin(mac, localIp);
+  udp.begin(localPort);
+}
+
+void loop() {
+  delay(1000);
+
+  StaticJsonBuffer<300> jsonBuffer;
+  JsonObject& json = buildJson(jsonBuffer);
+  sendJson(json);
+}
@@ -0,0 +1,56 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#include <ArduinoJson.h>
+
+// About
+// -----
+// This example shows the different ways you can use PROGMEM with ArduinoJson.
+// Please don't see this as an invitation to use PROGMEM.
+// On the contrary, you should always use char[] when possible, it's much more
+// efficient in term of code size, speed and memory usage.
+
+void setup() {
+#ifdef PROGMEM
+  DynamicJsonBuffer jsonBuffer;
+
+  // You can use a Flash String as your JSON input.
+  // WARNING: the content of the Flash String will be duplicated in the
+  // JsonBuffer.
+  JsonObject& root =
+      jsonBuffer.parseObject(F("{\"sensor\":\"gps\",\"time\":1351824120,"
+                               "\"data\":[48.756080,2.302038]}"));
+
+  // You can use a Flash String to get an element of a JsonObject
+  // No duplication is done.
+  long time = root[F("time")];
+
+  // You can use a Flash String to set an element of a JsonObject
+  // WARNING: the content of the Flash String will be duplicated in the
+  // JsonBuffer.
+  root[F("time")] = time;
+
+  // You can set a Flash String to a JsonObject or JsonArray:
+  // WARNING: the content of the Flash String will be duplicated in the
+  // JsonBuffer.
+  root["sensor"] = F("gps");
+
+  // You can compare the content of a JsonVariant to a Flash String
+  if (root["sensor"] == F("gps")) {
+    // ...
+  }
+
+#else
+
+#warning PROGMEM is not supported on this platform
+
+#endif
+}
+
+void loop() {
+  // not used in this example
+}
@@ -0,0 +1,63 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#include <ArduinoJson.h>
+
+// About
+// -----
+// This example shows the different ways you can use String with ArduinoJson.
+// Please don't see this as an invitation to use String.
+// On the contrary, you should always use char[] when possible, it's much more
+// efficient in term of code size, speed and memory usage.
+
+void setup() {
+  DynamicJsonBuffer jsonBuffer;
+
+  // You can use a String as your JSON input.
+  // WARNING: the content of the String will be duplicated in the JsonBuffer.
+  String input =
+      "{\"sensor\":\"gps\",\"time\":1351824120,\"data\":[48.756080,2.302038]}";
+  JsonObject& root = jsonBuffer.parseObject(input);
+
+  // You can use a String to get an element of a JsonObject
+  // No duplication is done.
+  long time = root[String("time")];
+
+  // You can use a String to set an element of a JsonObject
+  // WARNING: the content of the String will be duplicated in the JsonBuffer.
+  root[String("time")] = time;
+
+  // You can get a String from a JsonObject or JsonArray:
+  // No duplication is done, at least not in the JsonBuffer.
+  String sensor = root["sensor"];
+
+  // Unfortunately, the following doesn't work (issue #118):
+  // sensor = root["sensor"]; // <-  error "ambiguous overload for 'operator='"
+  // As a workaround, you need to replace by:
+  sensor = root["sensor"].as<String>();
+
+  // You can set a String to a JsonObject or JsonArray:
+  // WARNING: the content of the String will be duplicated in the JsonBuffer.
+  root["sensor"] = sensor;
+
+  // You can also concatenate strings
+  // WARNING: the content of the String will be duplicated in the JsonBuffer.
+  root[String("sen") + "sor"] = String("gp") + "s";
+
+  // You can compare the content of a JsonObject with a String
+  if (root["sensor"] == sensor) {
+    // ...
+  }
+
+  // Lastly, you can print the resulting JSON to a String
+  String output;
+  root.printTo(output);
+}
+
+void loop() {
+  // not used in this example
+}
@@ -0,0 +1,19 @@
+# CAUTION: this file is invoked by https://github.com/google/oss-fuzz
+
+CXXFLAGS += -I../include
+
+all: \
+	$(OUT)/json_fuzzer \
+	$(OUT)/json_fuzzer_seed_corpus.zip \
+	$(OUT)/json_fuzzer.options
+
+$(OUT)/json_fuzzer: fuzzer.cpp
+	$(CXX) $(CXXFLAGS) $< -o$@ $(LIB_FUZZING_ENGINE)
+
+$(OUT)/json_fuzzer_seed_corpus.zip: seed_corpus/*
+	zip -j $@ $?
+
+$(OUT)/json_fuzzer.options:
+	@echo "[libfuzzer]" > $@
+	@echo "max_len = 256" >> $@
+	@echo "timeout = 10" >> $@
@@ -0,0 +1,8 @@
+#!/bin/bash
+# This script mimics an invocation from https://github.com/google/oss-fuzz
+
+export CXX='clang++'
+export CXXFLAGS='-fsanitize-coverage=trace-pc-guard -fsanitize=address'
+export LIB_FUZZING_ENGINE=-lFuzzer
+make OUT=.
+./json_fuzzer my_corpus seed_corpus
@@ -0,0 +1,23 @@
+#include <ArduinoJson.h>
+
+class memstream : public std::istream {
+  struct membuf : std::streambuf {
+    membuf(const uint8_t *p, size_t l) {
+      setg((char *)p, (char *)p, (char *)p + l);
+    }
+  };
+  membuf _buffer;
+
+ public:
+  memstream(const uint8_t *p, size_t l)
+      : std::istream(&_buffer), _buffer(p, l) {
+    rdbuf(&_buffer);
+  }
+};
+
+extern "C" int LLVMFuzzerTestOneInput(const uint8_t *data, size_t size) {
+  DynamicJsonBuffer jsonBuffer;
+  memstream json(data, size);
+  jsonBuffer.parse(json);
+  return 0;
+}
@@ -0,0 +1,2 @@
+*
+!.gitignore
@@ -0,0 +1,8 @@
+{
+  "sensor": "gps",
+  "time": 1351824120,
+  "data": [
+    48.75608,
+    2.302038
+  ]
+}
@@ -0,0 +1,53 @@
+{
+  "coord": {
+    "lon": -0.13,
+    "lat": 51.51
+  },
+  "weather": [
+    {
+      "id": 301,
+      "main": "Drizzle",
+      "description": "drizzle",
+      "icon": "09n"
+    },
+    {
+      "id": 701,
+      "main": "Mist",
+      "description": "mist",
+      "icon": "50n"
+    },
+    {
+      "id": 741,
+      "main": "Fog",
+      "description": "fog",
+      "icon": "50n"
+    }
+  ],
+  "base": "stations",
+  "main": {
+    "temp": 281.87,
+    "pressure": 1032,
+    "humidity": 100,
+    "temp_min": 281.15,
+    "temp_max": 283.15
+  },
+  "visibility": 2900,
+  "wind": {
+    "speed": 1.5
+  },
+  "clouds": {
+    "all": 90
+  },
+  "dt": 1483820400,
+  "sys": {
+    "type": 1,
+    "id": 5091,
+    "message": 0.0226,
+    "country": "GB",
+    "sunrise": 1483776245,
+    "sunset": 1483805443
+  },
+  "id": 2643743,
+  "name": "London",
+  "cod": 200
+}
@@ -0,0 +1,90 @@
+{
+  "response": {
+    "version": "0.1",
+    "termsofService": "http://www.wunderground.com/weather/api/d/terms.html",
+    "features": {
+      "conditions": 1
+    }
+  },
+  "current_observation": {
+    "image": {
+      "url": "http://icons-ak.wxug.com/graphics/wu2/logo_130x80.png",
+      "title": "Weather Underground",
+      "link": "http://www.wunderground.com"
+    },
+    "display_location": {
+      "full": "San Francisco, CA",
+      "city": "San Francisco",
+      "state": "CA",
+      "state_name": "California",
+      "country": "US",
+      "country_iso3166": "US",
+      "zip": "94101",
+      "latitude": "37.77500916",
+      "longitude": "-122.41825867",
+      "elevation": "47.00000000"
+    },
+    "observation_location": {
+      "full": "SOMA - Near Van Ness, San Francisco, California",
+      "city": "SOMA - Near Van Ness, San Francisco",
+      "state": "California",
+      "country": "US",
+      "country_iso3166": "US",
+      "latitude": "37.773285",
+      "longitude": "-122.417725",
+      "elevation": "49 ft"
+    },
+    "estimated": {},
+    "station_id": "KCASANFR58",
+    "observation_time": "Last Updated on June 27, 5:27 PM PDT",
+    "observation_time_rfc822": "Wed, 27 Jun 2012 17:27:13 -0700",
+    "observation_epoch": "1340843233",
+    "local_time_rfc822": "Wed, 27 Jun 2012 17:27:14 -0700",
+    "local_epoch": "1340843234",
+    "local_tz_short": "PDT",
+    "local_tz_long": "America/Los_Angeles",
+    "local_tz_offset": "-0700",
+    "weather": "Partly Cloudy",
+    "temperature_string": "66.3 F (19.1 C)",
+    "temp_f": 66.3,
+    "temp_c": 19.1,
+    "relative_humidity": "65%",
+    "wind_string": "From the NNW at 22.0 MPH Gusting to 28.0 MPH",
+    "wind_dir": "NNW",
+    "wind_degrees": 346,
+    "wind_mph": 22,
+    "wind_gust_mph": "28.0",
+    "wind_kph": 35.4,
+    "wind_gust_kph": "45.1",
+    "pressure_mb": "1013",
+    "pressure_in": "29.93",
+    "pressure_trend": "+",
+    "dewpoint_string": "54 F (12 C)",
+    "dewpoint_f": 54,
+    "dewpoint_c": 12,
+    "heat_index_string": "NA",
+    "heat_index_f": "NA",
+    "heat_index_c": "NA",
+    "windchill_string": "NA",
+    "windchill_f": "NA",
+    "windchill_c": "NA",
+    "feelslike_string": "66.3 F (19.1 C)",
+    "feelslike_f": "66.3",
+    "feelslike_c": "19.1",
+    "visibility_mi": "10.0",
+    "visibility_km": "16.1",
+    "solarradiation": "",
+    "UV": "5",
+    "precip_1hr_string": "0.00 in ( 0 mm)",
+    "precip_1hr_in": "0.00",
+    "precip_1hr_metric": " 0",
+    "precip_today_string": "0.00 in (0 mm)",
+    "precip_today_in": "0.00",
+    "precip_today_metric": "0",
+    "icon": "partlycloudy",
+    "icon_url": "http://icons-ak.wxug.com/i/c/k/partlycloudy.gif",
+    "forecast_url": "http://www.wunderground.com/US/CA/San_Francisco.html",
+    "history_url": "http://www.wunderground.com/history/airport/KCASANFR58/2012/6/27/DailyHistory.html",
+    "ob_url": "http://www.wunderground.com/cgi-bin/findweather/getForecast?query=37.773285,-122.417725"
+  }
+}
@@ -0,0 +1,9 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#include "ArduinoJson.hpp"
+using namespace ArduinoJson;
@@ -0,0 +1,23 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "ArduinoJson/DynamicJsonBuffer.hpp"
+#include "ArduinoJson/JsonArray.hpp"
+#include "ArduinoJson/JsonObject.hpp"
+#include "ArduinoJson/JsonVariantComparisons.hpp"
+#include "ArduinoJson/StaticJsonBuffer.hpp"
+
+#include "ArduinoJson/Deserialization/JsonParserImpl.hpp"
+#include "ArduinoJson/JsonArrayImpl.hpp"
+#include "ArduinoJson/JsonBufferImpl.hpp"
+#include "ArduinoJson/JsonObjectImpl.hpp"
+#include "ArduinoJson/JsonVariantImpl.hpp"
+#include "ArduinoJson/Serialization/JsonSerializerImpl.hpp"
+
+using namespace ArduinoJson;
@@ -0,0 +1,137 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+// enable deprecated functions by default
+#ifndef ARDUINOJSON_ENABLE_DEPRECATED
+#define ARDUINOJSON_ENABLE_DEPRECATED 1
+#endif
+
+#ifdef ARDUINO  // assume this is an embedded platform
+
+// store using float instead of double to reduce the memory usage (issue #134)
+#ifndef ARDUINOJSON_USE_DOUBLE
+#define ARDUINOJSON_USE_DOUBLE 0
+#endif
+
+// store using a long because it usually match the size of a float.
+#ifndef ARDUINOJSON_USE_LONG_LONG
+#define ARDUINOJSON_USE_LONG_LONG 0
+#endif
+#ifndef ARDUINOJSON_USE_INT64
+#define ARDUINOJSON_USE_INT64 0
+#endif
+
+// Arduino has its own implementation of String to replace std::string
+#ifndef ARDUINOJSON_ENABLE_ARDUINO_STRING
+#define ARDUINOJSON_ENABLE_ARDUINO_STRING 1
+#endif
+
+#ifndef ARDUINOJSON_ENABLE_ARDUINO_STREAM
+#define ARDUINOJSON_ENABLE_ARDUINO_STREAM 1
+#endif
+
+// On AVR archiecture, we can use PROGMEM
+#ifndef ARDUINOJSON_ENABLE_PROGMEM
+#ifdef PROGMEM
+#define ARDUINOJSON_ENABLE_PROGMEM 1
+#else
+#define ARDUINOJSON_ENABLE_PROGMEM 0
+#endif
+#endif
+
+// Arduino doesn't have std::string
+#ifndef ARDUINOJSON_ENABLE_STD_STRING
+#define ARDUINOJSON_ENABLE_STD_STRING 0
+#endif
+
+// Arduino doesn't support STL stream
+#ifndef ARDUINOJSON_ENABLE_STD_STREAM
+#define ARDUINOJSON_ENABLE_STD_STREAM 0
+#endif
+
+#ifndef ARDUINOJSON_ENABLE_ALIGNMENT
+#ifdef ARDUINO_ARCH_AVR
+// alignment isn't needed for 8-bit AVR
+#define ARDUINOJSON_ENABLE_ALIGNMENT 0
+#else
+// but must processor needs pointer to be align on word size
+#define ARDUINOJSON_ENABLE_ALIGNMENT 1
+#endif
+#endif
+
+// low value to prevent stack overflow
+#ifndef ARDUINOJSON_DEFAULT_NESTING_LIMIT
+#define ARDUINOJSON_DEFAULT_NESTING_LIMIT 10
+#endif
+
+#else  // assume this is a computer
+
+// on a computer we have plenty of memory so we can use doubles
+#ifndef ARDUINOJSON_USE_DOUBLE
+#define ARDUINOJSON_USE_DOUBLE 1
+#endif
+
+// use long long when available
+#ifndef ARDUINOJSON_USE_LONG_LONG
+#if __cplusplus >= 201103L || (defined(_MSC_VER) && _MSC_VER >= 1800)
+#define ARDUINOJSON_USE_LONG_LONG 1
+#else
+#define ARDUINOJSON_USE_LONG_LONG 0
+#endif
+#endif
+
+// use _int64 on old versions of Visual Studio
+#ifndef ARDUINOJSON_USE_INT64
+#if defined(_MSC_VER) && _MSC_VER <= 1700
+#define ARDUINOJSON_USE_INT64 1
+#else
+#define ARDUINOJSON_USE_INT64 0
+#endif
+#endif
+
+// on a computer, we can use std::string
+#ifndef ARDUINOJSON_ENABLE_STD_STRING
+#define ARDUINOJSON_ENABLE_STD_STRING 1
+#endif
+
+// on a computer, there is no reason to beleive Arduino String is available
+#ifndef ARDUINOJSON_ENABLE_ARDUINO_STRING
+#define ARDUINOJSON_ENABLE_ARDUINO_STRING 0
+#endif
+
+// PROGMEM is only available on AVR architecture
+#ifndef ARDUINOJSON_ENABLE_PROGMEM
+#define ARDUINOJSON_ENABLE_PROGMEM 0
+#endif
+
+// on a computer, we can assume that the STL is there
+#ifndef ARDUINOJSON_ENABLE_STD_STREAM
+#define ARDUINOJSON_ENABLE_STD_STREAM 1
+#endif
+
+// on a computer, there is no reason to beleive Arduino Stream is available
+#ifndef ARDUINOJSON_ENABLE_ARDUINO_STREAM
+#define ARDUINOJSON_ENABLE_ARDUINO_STREAM 0
+#endif
+
+#ifndef ARDUINOJSON_ENABLE_ALIGNMENT
+// even if not required, most cpu's are faster with aligned pointers
+#define ARDUINOJSON_ENABLE_ALIGNMENT 1
+#endif
+
+// on a computer, we should have a lot of space on the stack
+#ifndef ARDUINOJSON_DEFAULT_NESTING_LIMIT
+#define ARDUINOJSON_DEFAULT_NESTING_LIMIT 50
+#endif
+
+#endif
+
+#if ARDUINOJSON_USE_LONG_LONG && ARDUINOJSON_USE_INT64
+#error ARDUINOJSON_USE_LONG_LONG and ARDUINOJSON_USE_INT64 cannot be set together
+#endif
@@ -0,0 +1,42 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../Print.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+class Encoding {
+ public:
+  // Optimized for code size on a 8-bit AVR
+  static char escapeChar(char c) {
+    const char *p = escapeTable(false);
+    while (p[0] && p[1] != c) {
+      p += 2;
+    }
+    return p[0];
+  }
+
+  // Optimized for code size on a 8-bit AVR
+  static char unescapeChar(char c) {
+    const char *p = escapeTable(true);
+    for (;;) {
+      if (p[0] == '\0') return c;
+      if (p[0] == c) return p[1];
+      p += 2;
+    }
+  }
+
+ private:
+  static const char *escapeTable(bool excludeIdenticals) {
+    return &"\"\"\\\\b\bf\fn\nr\rt\t"[excludeIdenticals ? 4 : 0];
+  }
+};
+}
+}
@@ -0,0 +1,25 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../JsonBuffer.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+class JsonBufferAllocated {
+ public:
+  void *operator new(size_t n, JsonBuffer *jsonBuffer) throw() {
+    if (!jsonBuffer) return NULL;
+    return jsonBuffer->alloc(n);
+  }
+
+  void operator delete(void *, JsonBuffer *)throw() {}
+};
+}
+}
@@ -0,0 +1,21 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../Configuration.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+#if ARDUINOJSON_USE_DOUBLE
+typedef double JsonFloat;
+#else
+typedef float JsonFloat;
+#endif
+}
+}
@@ -0,0 +1,26 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../Configuration.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+#if ARDUINOJSON_USE_LONG_LONG
+typedef long long JsonInteger;
+typedef unsigned long long JsonUInt;
+#elif ARDUINOJSON_USE_INT64
+typedef __int64 JsonInteger;
+typedef unsigned _int64 JsonUInt;
+#else
+typedef long JsonInteger;
+typedef unsigned long JsonUInt;
+#endif
+}
+}
@@ -0,0 +1,45 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+namespace Internals {
+
+// A metafunction that returns the type of the value returned by
+// JsonVariant::as<T>()
+template <typename T>
+struct JsonVariantAs {
+  typedef T type;
+};
+
+template <>
+struct JsonVariantAs<char*> {
+  typedef const char* type;
+};
+
+template <>
+struct JsonVariantAs<JsonArray> {
+  typedef JsonArray& type;
+};
+
+template <>
+struct JsonVariantAs<const JsonArray> {
+  typedef const JsonArray& type;
+};
+
+template <>
+struct JsonVariantAs<JsonObject> {
+  typedef JsonObject& type;
+};
+
+template <>
+struct JsonVariantAs<const JsonObject> {
+  typedef const JsonObject& type;
+};
+}
+}
@@ -0,0 +1,69 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../JsonVariantBase.hpp"
+#include "../StringTraits/StringTraits.hpp"
+#include "../TypeTraits/EnableIf.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+template <typename TComparand, typename Enable = void>
+struct JsonVariantComparer {};
+
+template <typename TString>
+struct JsonVariantComparer<
+    TString,
+    typename TypeTraits::EnableIf<TypeTraits::IsString<TString>::value>::type> {
+  template <typename TVariant>
+  static bool equals(const JsonVariantBase<TVariant> &variant,
+                     const TString &comparand) {
+    const char *value = variant.template as<const char *>();
+    return Internals::StringTraits<TString>::equals(comparand, value);
+  }
+};
+
+template <typename TComparand>
+struct JsonVariantComparer<
+    TComparand, typename TypeTraits::EnableIf<
+                    !TypeTraits::IsVariant<TComparand>::value &&
+                    !TypeTraits::IsString<TComparand>::value>::type> {
+  template <typename TVariant>
+  static bool equals(const JsonVariantBase<TVariant> &variant,
+                     const TComparand &comparand) {
+    return variant.template as<TComparand>() == comparand;
+  }
+};
+
+template <typename TVariant2>
+struct JsonVariantComparer<TVariant2,
+                           typename TypeTraits::EnableIf<
+                               TypeTraits::IsVariant<TVariant2>::value>::type> {
+  template <typename TVariant1>
+  static bool equals(const JsonVariantBase<TVariant1> &left,
+                     const TVariant2 &right) {
+    if (left.template is<bool>() && right.template is<bool>())
+      return left.template as<bool>() == right.template as<bool>();
+    if (left.template is<JsonInteger>() && right.template is<JsonInteger>())
+      return left.template as<JsonInteger>() ==
+             right.template as<JsonInteger>();
+    if (left.template is<JsonFloat>() && right.template is<JsonFloat>())
+      return left.template as<JsonFloat>() == right.template as<JsonFloat>();
+    if (left.template is<JsonArray>() && right.template is<JsonArray>())
+      return left.template as<JsonArray>() == right.template as<JsonArray>();
+    if (left.template is<JsonObject>() && right.template is<JsonObject>())
+      return left.template as<JsonObject>() == right.template as<JsonObject>();
+    if (left.template is<char *>() && right.template is<char *>())
+      return strcmp(left.template as<char *>(), right.template as<char *>()) ==
+             0;
+
+    return false;
+  }
+};
+}
+}
@@ -0,0 +1,30 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "JsonFloat.hpp"
+#include "JsonInteger.hpp"
+
+namespace ArduinoJson {
+
+// Forward declarations
+class JsonArray;
+class JsonObject;
+
+namespace Internals {
+// A union that defines the actual content of a JsonVariant.
+// The enum JsonVariantType determines which member is in use.
+union JsonVariantContent {
+  JsonFloat asFloat;     // used for double and float
+  JsonUInt asInteger;    // used for bool, char, short, int and longs
+  const char* asString;  // asString can be null
+  JsonArray* asArray;    // asArray cannot be null
+  JsonObject* asObject;  // asObject cannot be null
+};
+}
+}
@@ -0,0 +1,26 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+namespace Internals {
+
+template <typename T>
+struct JsonVariantDefault {
+  static T get() {
+    return T();
+  }
+};
+
+template <typename T>
+struct JsonVariantDefault<const T> : JsonVariantDefault<T> {};
+
+template <typename T>
+struct JsonVariantDefault<T&> : JsonVariantDefault<T> {};
+}
+}
@@ -0,0 +1,39 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+class JsonArray;
+class JsonObject;
+
+namespace Internals {
+
+// Enumerated type to know the current type of a JsonVariant.
+// The value determines which member of JsonVariantContent is used.
+enum JsonVariantType {
+  JSON_UNDEFINED,         // JsonVariant has not been initialized
+  JSON_UNPARSED,          // JsonVariant contains an unparsed string
+  JSON_STRING,            // JsonVariant stores a const char*
+  JSON_BOOLEAN,           // JsonVariant stores a bool
+  JSON_POSITIVE_INTEGER,  // JsonVariant stores an unsigned long
+  JSON_NEGATIVE_INTEGER,  // JsonVariant stores an unsigned long that must be
+                          // negated
+  JSON_ARRAY,             // JsonVariant stores a pointer to a JsonArray
+  JSON_OBJECT,            // JsonVariant stores a pointer to a JsonObject
+
+  // The following values are reserved for float values
+  // Multiple values are used for double, depending on the number of decimal
+  // digits that must be printed in the JSON output.
+  // This little trick allow to save one extra member in JsonVariant
+  JSON_FLOAT_0_DECIMALS
+  // JSON_FLOAT_1_DECIMAL
+  // JSON_FLOAT_2_DECIMALS
+  // ...
+};
+}
+}
@@ -0,0 +1,94 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../JsonBuffer.hpp"
+#include "ListConstIterator.hpp"
+#include "ListIterator.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+// A singly linked list of T.
+// The linked list is composed of ListNode<T>.
+// It is derived by JsonArray and JsonObject
+template <typename T>
+class List {
+ public:
+  typedef T value_type;
+  typedef ListNode<T> node_type;
+  typedef ListIterator<T> iterator;
+  typedef ListConstIterator<T> const_iterator;
+
+  // Creates an empty List<T> attached to a JsonBuffer.
+  // The JsonBuffer allows to allocate new nodes.
+  // When buffer is NULL, the List is not able to grow and success() returns
+  // false. This is used to identify bad memory allocations and parsing
+  // failures.
+  explicit List(JsonBuffer *buffer) : _buffer(buffer), _firstNode(NULL) {}
+
+  // Returns true if the object is valid
+  // Would return false in the following situation:
+  // - the memory allocation failed (StaticJsonBuffer was too small)
+  // - the JSON parsing failed
+  bool success() const {
+    return _buffer != NULL;
+  }
+
+  // Returns the numbers of elements in the list.
+  // For a JsonObject, it would return the number of key-value pairs
+  size_t size() const {
+    size_t nodeCount = 0;
+    for (node_type *node = _firstNode; node; node = node->next) nodeCount++;
+    return nodeCount;
+  }
+
+  iterator begin() {
+    return iterator(_firstNode);
+  }
+  iterator end() {
+    return iterator(NULL);
+  }
+
+  const_iterator begin() const {
+    return const_iterator(_firstNode);
+  }
+  const_iterator end() const {
+    return const_iterator(NULL);
+  }
+
+ protected:
+  node_type *addNewNode() {
+    node_type *newNode = new (_buffer) node_type();
+
+    if (_firstNode) {
+      node_type *lastNode = _firstNode;
+      while (lastNode->next) lastNode = lastNode->next;
+      lastNode->next = newNode;
+    } else {
+      _firstNode = newNode;
+    }
+
+    return newNode;
+  }
+
+  void removeNode(node_type *nodeToRemove) {
+    if (!nodeToRemove) return;
+    if (nodeToRemove == _firstNode) {
+      _firstNode = nodeToRemove->next;
+    } else {
+      for (node_type *node = _firstNode; node; node = node->next)
+        if (node->next == nodeToRemove) node->next = nodeToRemove->next;
+    }
+  }
+
+  JsonBuffer *_buffer;
+  node_type *_firstNode;
+};
+}
+}
@@ -0,0 +1,45 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "ListNode.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+// A read-only forward itertor for List<T>
+template <typename T>
+class ListConstIterator {
+ public:
+  explicit ListConstIterator(const ListNode<T> *node = NULL) : _node(node) {}
+
+  const T &operator*() const {
+    return _node->content;
+  }
+  const T *operator->() {
+    return &_node->content;
+  }
+
+  bool operator==(const ListConstIterator<T> &other) const {
+    return _node == other._node;
+  }
+
+  bool operator!=(const ListConstIterator<T> &other) const {
+    return _node != other._node;
+  }
+
+  ListConstIterator<T> &operator++() {
+    if (_node) _node = _node->next;
+    return *this;
+  }
+
+ private:
+  const ListNode<T> *_node;
+};
+}
+}
@@ -0,0 +1,50 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "ListConstIterator.hpp"
+#include "ListNode.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+// A read-write forward iterator for List<T>
+template <typename T>
+class ListIterator {
+ public:
+  explicit ListIterator(ListNode<T> *node = NULL) : _node(node) {}
+
+  T &operator*() const {
+    return _node->content;
+  }
+  T *operator->() {
+    return &_node->content;
+  }
+
+  bool operator==(const ListIterator<T> &other) const {
+    return _node == other._node;
+  }
+
+  bool operator!=(const ListIterator<T> &other) const {
+    return _node != other._node;
+  }
+
+  ListIterator<T> &operator++() {
+    if (_node) _node = _node->next;
+    return *this;
+  }
+
+  operator ListConstIterator<T>() const {
+    return ListConstIterator<T>(_node);
+  }
+
+ private:
+  ListNode<T> *_node;
+};
+}
+}
@@ -0,0 +1,27 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include <stddef.h>  // for NULL
+
+#include "JsonBufferAllocated.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+// A node for a singly-linked list.
+// Used by List<T> and its iterators.
+template <typename T>
+struct ListNode : public Internals::JsonBufferAllocated {
+  ListNode() : next(NULL) {}
+
+  ListNode<T> *next;
+  T content;
+};
+}
+}
@@ -0,0 +1,66 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include <stdlib.h>
+
+namespace ArduinoJson {
+namespace Internals {
+template <typename TFloat>
+TFloat parse(const char *);
+
+template <>
+inline float parse<float>(const char *s) {
+  return static_cast<float>(strtod(s, NULL));
+}
+
+template <>
+inline double parse<double>(const char *s) {
+  return strtod(s, NULL);
+}
+
+template <>
+inline long parse<long>(const char *s) {
+  return strtol(s, NULL, 10);
+}
+
+template <>
+inline unsigned long parse<unsigned long>(const char *s) {
+  return strtoul(s, NULL, 10);
+}
+
+template <>
+inline int parse<int>(const char *s) {
+  return atoi(s);
+}
+
+#if ARDUINOJSON_USE_LONG_LONG
+template <>
+inline long long parse<long long>(const char *s) {
+  return strtoll(s, NULL, 10);
+}
+
+template <>
+inline unsigned long long parse<unsigned long long>(const char *s) {
+  return strtoull(s, NULL, 10);
+}
+#endif
+
+#if ARDUINOJSON_USE_INT64
+template <>
+inline __int64 parse<__int64>(const char *s) {
+  return _strtoi64(s, NULL, 10);
+}
+
+template <>
+inline unsigned __int64 parse<unsigned __int64>(const char *s) {
+  return _strtoui64(s, NULL, 10);
+}
+#endif
+}
+}
@@ -0,0 +1,37 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+namespace Internals {
+
+// A type that is meant to be used by reference only (JsonArray and JsonObject)
+class ReferenceType {
+ public:
+  bool operator==(const ReferenceType& other) const {
+    // two JsonArray are equal if they are the same instance
+    // (we don't compare the content)
+    return this == &other;
+  }
+
+  bool operator!=(const ReferenceType& other) const {
+    return this != &other;
+  }
+
+ protected:
+  ReferenceType() {}
+
+ private:
+  // copy constructor is private
+  ReferenceType(const ReferenceType&);
+
+  // copy operator is private
+  ReferenceType& operator=(const ReferenceType&);
+};
+}
+}
@@ -0,0 +1,53 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../JsonBuffer.hpp"
+#include "../JsonVariant.hpp"
+#include "../StringTraits/StringTraits.hpp"
+#include "../TypeTraits/EnableIf.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+template <typename TSource, typename Enable = void>
+struct ValueSetter {
+  template <typename TDestination>
+  static bool set(JsonBuffer*, TDestination& destination,
+                  const TSource& source) {
+    destination = source;
+    return true;
+  }
+};
+
+template <typename TSource>
+struct ValueSetter<TSource, typename TypeTraits::EnableIf<StringTraits<
+                                TSource>::should_duplicate>::type> {
+  template <typename TDestination>
+  static bool set(JsonBuffer* buffer, TDestination& destination,
+                  const TSource& source) {
+    const char* copy = buffer->strdup(source);
+    if (!copy) return false;
+    destination = copy;
+    return true;
+  }
+};
+
+template <typename TSource>
+struct ValueSetter<TSource, typename TypeTraits::EnableIf<!StringTraits<
+                                TSource>::should_duplicate>::type> {
+  template <typename TDestination>
+  static bool set(JsonBuffer*, TDestination& destination,
+                  const TSource& source) {
+    // unsigned char* -> char*
+    destination = reinterpret_cast<const char*>(source);
+    return true;
+  }
+};
+}
+}
@@ -0,0 +1,64 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+namespace Internals {
+template <typename TInput>
+void skipSpacesAndComments(TInput& input) {
+  for (;;) {
+    switch (input.current()) {
+      // spaces
+      case ' ':
+      case '\t':
+      case '\r':
+      case '\n':
+        input.move();
+        continue;
+
+      // comments
+      case '/':
+        switch (input.next()) {
+          // C-style block comment
+          case '*':
+            input.move();  // skip '/'
+            // no need to skip '*'
+            for (;;) {
+              input.move();
+              if (input.current() == '\0') return;
+              if (input.current() == '*' && input.next() == '/') {
+                input.move();  // skip '*'
+                input.move();  // skip '/'
+                break;
+              }
+            }
+            break;
+
+          // C++-style line comment
+          case '/':
+            // not need to skip "//"
+            for (;;) {
+              input.move();
+              if (input.current() == '\0') return;
+              if (input.current() == '\n') break;
+            }
+            break;
+
+          // not a comment, just a '/'
+          default:
+            return;
+        }
+        break;
+
+      default:
+        return;
+    }
+  }
+}
+}
+}
@@ -0,0 +1,107 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../JsonBuffer.hpp"
+#include "../JsonVariant.hpp"
+#include "../TypeTraits/IsConst.hpp"
+#include "StringWriter.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+// Parse JSON string to create JsonArrays and JsonObjects
+// This internal class is not indended to be used directly.
+// Instead, use JsonBuffer.parseArray() or .parseObject()
+template <typename TReader, typename TWriter>
+class JsonParser {
+ public:
+  JsonParser(JsonBuffer *buffer, TReader reader, TWriter writer,
+             uint8_t nestingLimit)
+      : _buffer(buffer),
+        _reader(reader),
+        _writer(writer),
+        _nestingLimit(nestingLimit) {}
+
+  JsonArray &parseArray();
+  JsonObject &parseObject();
+
+  JsonVariant parseVariant() {
+    JsonVariant result;
+    parseAnythingTo(&result);
+    return result;
+  }
+
+ private:
+  JsonParser &operator=(const JsonParser &);  // non-copiable
+
+  static bool eat(TReader &, char charToSkip);
+  FORCE_INLINE bool eat(char charToSkip) {
+    return eat(_reader, charToSkip);
+  }
+
+  const char *parseString();
+  bool parseAnythingTo(JsonVariant *destination);
+  FORCE_INLINE bool parseAnythingToUnsafe(JsonVariant *destination);
+
+  inline bool parseArrayTo(JsonVariant *destination);
+  inline bool parseObjectTo(JsonVariant *destination);
+  inline bool parseStringTo(JsonVariant *destination);
+
+  static inline bool isInRange(char c, char min, char max) {
+    return min <= c && c <= max;
+  }
+
+  static inline bool isLetterOrNumber(char c) {
+    return isInRange(c, '0', '9') || isInRange(c, 'a', 'z') ||
+           isInRange(c, 'A', 'Z') || c == '+' || c == '-' || c == '.';
+  }
+
+  static inline bool isQuote(char c) {
+    return c == '\'' || c == '\"';
+  }
+
+  JsonBuffer *_buffer;
+  TReader _reader;
+  TWriter _writer;
+  uint8_t _nestingLimit;
+};
+
+template <typename TJsonBuffer, typename TString, typename Enable = void>
+struct JsonParserBuilder {
+  typedef typename Internals::StringTraits<TString>::Reader InputReader;
+  typedef JsonParser<InputReader, TJsonBuffer &> TParser;
+
+  static TParser makeParser(TJsonBuffer *buffer, TString &json,
+                            uint8_t nestingLimit) {
+    return TParser(buffer, InputReader(json), *buffer, nestingLimit);
+  }
+};
+
+template <typename TJsonBuffer, typename TChar>
+struct JsonParserBuilder<
+    TJsonBuffer, TChar *,
+    typename TypeTraits::EnableIf<!TypeTraits::IsConst<TChar>::value>::type> {
+  typedef typename Internals::StringTraits<TChar *>::Reader TReader;
+  typedef StringWriter<TChar> TWriter;
+  typedef JsonParser<TReader, TWriter> TParser;
+
+  static TParser makeParser(TJsonBuffer *buffer, TChar *json,
+                            uint8_t nestingLimit) {
+    return TParser(buffer, TReader(json), TWriter(json), nestingLimit);
+  }
+};
+
+template <typename TJsonBuffer, typename TString>
+inline typename JsonParserBuilder<TJsonBuffer, TString>::TParser makeParser(
+    TJsonBuffer *buffer, TString &json, uint8_t nestingLimit) {
+  return JsonParserBuilder<TJsonBuffer, TString>::makeParser(buffer, json,
+                                                             nestingLimit);
+}
+}
+}
@@ -0,0 +1,196 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "Comments.hpp"
+#include "JsonParser.hpp"
+
+template <typename TReader, typename TWriter>
+inline bool ArduinoJson::Internals::JsonParser<TReader, TWriter>::eat(
+    TReader &reader, char charToSkip) {
+  skipSpacesAndComments(reader);
+  if (reader.current() != charToSkip) return false;
+  reader.move();
+  return true;
+}
+
+template <typename TReader, typename TWriter>
+inline bool
+ArduinoJson::Internals::JsonParser<TReader, TWriter>::parseAnythingTo(
+    JsonVariant *destination) {
+  if (_nestingLimit == 0) return false;
+  _nestingLimit--;
+  bool success = parseAnythingToUnsafe(destination);
+  _nestingLimit++;
+  return success;
+}
+
+template <typename TReader, typename TWriter>
+inline bool
+ArduinoJson::Internals::JsonParser<TReader, TWriter>::parseAnythingToUnsafe(
+    JsonVariant *destination) {
+  skipSpacesAndComments(_reader);
+
+  switch (_reader.current()) {
+    case '[':
+      return parseArrayTo(destination);
+
+    case '{':
+      return parseObjectTo(destination);
+
+    default:
+      return parseStringTo(destination);
+  }
+}
+
+template <typename TReader, typename TWriter>
+inline ArduinoJson::JsonArray &
+ArduinoJson::Internals::JsonParser<TReader, TWriter>::parseArray() {
+  // Create an empty array
+  JsonArray &array = _buffer->createArray();
+
+  // Check opening braket
+  if (!eat('[')) goto ERROR_MISSING_BRACKET;
+  if (eat(']')) goto SUCCESS_EMPTY_ARRAY;
+
+  // Read each value
+  for (;;) {
+    // 1 - Parse value
+    JsonVariant value;
+    if (!parseAnythingTo(&value)) goto ERROR_INVALID_VALUE;
+    if (!array.add(value)) goto ERROR_NO_MEMORY;
+
+    // 2 - More values?
+    if (eat(']')) goto SUCCES_NON_EMPTY_ARRAY;
+    if (!eat(',')) goto ERROR_MISSING_COMMA;
+  }
+
+SUCCESS_EMPTY_ARRAY:
+SUCCES_NON_EMPTY_ARRAY:
+  return array;
+
+ERROR_INVALID_VALUE:
+ERROR_MISSING_BRACKET:
+ERROR_MISSING_COMMA:
+ERROR_NO_MEMORY:
+  return JsonArray::invalid();
+}
+
+template <typename TReader, typename TWriter>
+inline bool ArduinoJson::Internals::JsonParser<TReader, TWriter>::parseArrayTo(
+    JsonVariant *destination) {
+  JsonArray &array = parseArray();
+  if (!array.success()) return false;
+
+  *destination = array;
+  return true;
+}
+
+template <typename TReader, typename TWriter>
+inline ArduinoJson::JsonObject &
+ArduinoJson::Internals::JsonParser<TReader, TWriter>::parseObject() {
+  // Create an empty object
+  JsonObject &object = _buffer->createObject();
+
+  // Check opening brace
+  if (!eat('{')) goto ERROR_MISSING_BRACE;
+  if (eat('}')) goto SUCCESS_EMPTY_OBJECT;
+
+  // Read each key value pair
+  for (;;) {
+    // 1 - Parse key
+    const char *key = parseString();
+    if (!key) goto ERROR_INVALID_KEY;
+    if (!eat(':')) goto ERROR_MISSING_COLON;
+
+    // 2 - Parse value
+    JsonVariant value;
+    if (!parseAnythingTo(&value)) goto ERROR_INVALID_VALUE;
+    if (!object.set(key, value)) goto ERROR_NO_MEMORY;
+
+    // 3 - More keys/values?
+    if (eat('}')) goto SUCCESS_NON_EMPTY_OBJECT;
+    if (!eat(',')) goto ERROR_MISSING_COMMA;
+  }
+
+SUCCESS_EMPTY_OBJECT:
+SUCCESS_NON_EMPTY_OBJECT:
+  return object;
+
+ERROR_INVALID_KEY:
+ERROR_INVALID_VALUE:
+ERROR_MISSING_BRACE:
+ERROR_MISSING_COLON:
+ERROR_MISSING_COMMA:
+ERROR_NO_MEMORY:
+  return JsonObject::invalid();
+}
+
+template <typename TReader, typename TWriter>
+inline bool ArduinoJson::Internals::JsonParser<TReader, TWriter>::parseObjectTo(
+    JsonVariant *destination) {
+  JsonObject &object = parseObject();
+  if (!object.success()) return false;
+
+  *destination = object;
+  return true;
+}
+
+template <typename TReader, typename TWriter>
+inline const char *
+ArduinoJson::Internals::JsonParser<TReader, TWriter>::parseString() {
+  typename TypeTraits::RemoveReference<TWriter>::type::String str =
+      _writer.startString();
+
+  skipSpacesAndComments(_reader);
+  char c = _reader.current();
+
+  if (isQuote(c)) {  // quotes
+    _reader.move();
+    char stopChar = c;
+    for (;;) {
+      c = _reader.current();
+      if (c == '\0') break;
+      _reader.move();
+
+      if (c == stopChar) break;
+
+      if (c == '\\') {
+        // replace char
+        c = Encoding::unescapeChar(_reader.current());
+        if (c == '\0') break;
+        _reader.move();
+      }
+
+      str.append(c);
+    }
+  } else {  // no quotes
+    for (;;) {
+      if (!isLetterOrNumber(c)) break;
+      _reader.move();
+      str.append(c);
+      c = _reader.current();
+    }
+  }
+
+  return str.c_str();
+}
+
+template <typename TReader, typename TWriter>
+inline bool ArduinoJson::Internals::JsonParser<TReader, TWriter>::parseStringTo(
+    JsonVariant *destination) {
+  bool hasQuotes = isQuote(_reader.current());
+  const char *value = parseString();
+  if (value == NULL) return false;
+  if (hasQuotes) {
+    *destination = value;
+  } else {
+    *destination = RawJson(value);
+  }
+  return true;
+}
@@ -0,0 +1,44 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+namespace Internals {
+
+template <typename TChar>
+class StringWriter {
+ public:
+  class String {
+   public:
+    String(TChar** ptr) : _writePtr(ptr), _startPtr(*ptr) {}
+
+    void append(TChar c) {
+      *(*_writePtr)++ = c;
+    }
+
+    const char* c_str() const {
+      *(*_writePtr)++ = 0;
+      return reinterpret_cast<const char*>(_startPtr);
+    }
+
+   private:
+    TChar** _writePtr;
+    TChar* _startPtr;
+  };
+
+  StringWriter(TChar* buffer) : _ptr(buffer) {}
+
+  String startString() {
+    return String(&_ptr);
+  }
+
+ private:
+  TChar* _ptr;
+};
+}
+}
@@ -0,0 +1,159 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "JsonBufferBase.hpp"
+
+#include <stdlib.h>
+
+#if defined(__clang__)
+#pragma clang diagnostic push
+#pragma clang diagnostic ignored "-Wnon-virtual-dtor"
+#elif defined(__GNUC__)
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#pragma GCC diagnostic push
+#endif
+#pragma GCC diagnostic ignored "-Wnon-virtual-dtor"
+#endif
+
+namespace ArduinoJson {
+class DefaultAllocator {
+ public:
+  void* allocate(size_t size) {
+    return malloc(size);
+  }
+  void deallocate(void* pointer) {
+    free(pointer);
+  }
+};
+
+template <typename TAllocator>
+class DynamicJsonBufferBase
+    : public JsonBufferBase<DynamicJsonBufferBase<TAllocator> > {
+  struct Block;
+  struct EmptyBlock {
+    Block* next;
+    size_t capacity;
+    size_t size;
+  };
+  struct Block : EmptyBlock {
+    uint8_t data[1];
+  };
+
+ public:
+  DynamicJsonBufferBase(size_t initialSize = 256)
+      : _head(NULL), _nextBlockCapacity(initialSize) {}
+
+  ~DynamicJsonBufferBase() {
+    Block* currentBlock = _head;
+
+    while (currentBlock != NULL) {
+      Block* nextBlock = currentBlock->next;
+      _allocator.deallocate(currentBlock);
+      currentBlock = nextBlock;
+    }
+  }
+
+  size_t size() const {
+    size_t total = 0;
+    for (const Block* b = _head; b; b = b->next) total += b->size;
+    return total;
+  }
+
+  virtual void* alloc(size_t bytes) {
+    alignNextAlloc();
+    return canAllocInHead(bytes) ? allocInHead(bytes) : allocInNewBlock(bytes);
+  }
+
+  class String {
+   public:
+    String(DynamicJsonBufferBase* parent)
+        : _parent(parent), _start(NULL), _length(0) {}
+
+    void append(char c) {
+      if (_parent->canAllocInHead(1)) {
+        char* end = static_cast<char*>(_parent->allocInHead(1));
+        *end = c;
+        if (_length == 0) _start = end;
+      } else {
+        char* newStart =
+            static_cast<char*>(_parent->allocInNewBlock(_length + 1));
+        if (_start && newStart) memcpy(newStart, _start, _length);
+        if (newStart) newStart[_length] = c;
+        _start = newStart;
+      }
+      _length++;
+    }
+
+    const char* c_str() {
+      append(0);
+      return _start;
+    }
+
+   private:
+    DynamicJsonBufferBase* _parent;
+    char* _start;
+    int _length;
+  };
+
+  String startString() {
+    return String(this);
+  }
+
+ private:
+  void alignNextAlloc() {
+    if (_head) _head->size = this->round_size_up(_head->size);
+  }
+
+  bool canAllocInHead(size_t bytes) const {
+    return _head != NULL && _head->size + bytes <= _head->capacity;
+  }
+
+  void* allocInHead(size_t bytes) {
+    void* p = _head->data + _head->size;
+    _head->size += bytes;
+    return p;
+  }
+
+  void* allocInNewBlock(size_t bytes) {
+    size_t capacity = _nextBlockCapacity;
+    if (bytes > capacity) capacity = bytes;
+    if (!addNewBlock(capacity)) return NULL;
+    _nextBlockCapacity *= 2;
+    return allocInHead(bytes);
+  }
+
+  bool addNewBlock(size_t capacity) {
+    size_t bytes = sizeof(EmptyBlock) + capacity;
+    Block* block = static_cast<Block*>(_allocator.allocate(bytes));
+    if (block == NULL) return false;
+    block->capacity = capacity;
+    block->size = 0;
+    block->next = _head;
+    _head = block;
+    return true;
+  }
+
+  TAllocator _allocator;
+  Block* _head;
+  size_t _nextBlockCapacity;
+};
+
+#if defined(__clang__)
+#pragma clang diagnostic pop
+#elif defined(__GNUC__)
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#pragma GCC diagnostic pop
+#endif
+#endif
+
+// Implements a JsonBuffer with dynamic memory allocation.
+// You are strongly encouraged to consider using StaticJsonBuffer which is much
+// more suitable for embedded systems.
+typedef DynamicJsonBufferBase<DefaultAllocator> DynamicJsonBuffer;
+}
@@ -0,0 +1,234 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "Data/JsonBufferAllocated.hpp"
+#include "Data/List.hpp"
+#include "Data/ReferenceType.hpp"
+#include "Data/ValueSetter.hpp"
+#include "JsonVariant.hpp"
+#include "Serialization/JsonPrintable.hpp"
+#include "StringTraits/StringTraits.hpp"
+#include "TypeTraits/EnableIf.hpp"
+#include "TypeTraits/IsArray.hpp"
+#include "TypeTraits/IsFloatingPoint.hpp"
+#include "TypeTraits/IsSame.hpp"
+
+// Returns the size (in bytes) of an array with n elements.
+// Can be very handy to determine the size of a StaticJsonBuffer.
+#define JSON_ARRAY_SIZE(NUMBER_OF_ELEMENTS) \
+  (sizeof(JsonArray) + (NUMBER_OF_ELEMENTS) * sizeof(JsonArray::node_type))
+
+namespace ArduinoJson {
+
+// Forward declarations
+class JsonObject;
+class JsonBuffer;
+class JsonArraySubscript;
+
+// An array of JsonVariant.
+//
+// The constructor is private, instances must be created via
+// JsonBuffer::createArray() or JsonBuffer::parseArray().
+// A JsonArray can be serialized to a JSON string via JsonArray::printTo().
+// It can also be deserialized from a JSON string via JsonBuffer::parseArray().
+class JsonArray : public Internals::JsonPrintable<JsonArray>,
+                  public Internals::ReferenceType,
+                  public Internals::List<JsonVariant>,
+                  public Internals::JsonBufferAllocated {
+ public:
+  // Create an empty JsonArray attached to the specified JsonBuffer.
+  // You should not call this constructor directly.
+  // Instead, use JsonBuffer::createArray() or JsonBuffer::parseArray().
+  explicit JsonArray(JsonBuffer *buffer)
+      : Internals::List<JsonVariant>(buffer) {}
+
+  // Gets the value at the specified index
+  const JsonArraySubscript operator[](size_t index) const;
+
+  // Gets or sets the value at specified index
+  JsonArraySubscript operator[](size_t index);
+
+  // Adds the specified value at the end of the array.
+  //
+  // bool add(TValue);
+  // TValue = bool, long, int, short, float, double, RawJson, JsonVariant,
+  //          const std::string&, const String&,
+  //          const JsonArray&, const JsonObject&
+  template <typename T>
+  typename TypeTraits::EnableIf<!TypeTraits::IsArray<T>::value, bool>::type add(
+      const T &value) {
+    return add_impl<const T &>(value);
+  }
+  //
+  // bool add(TValue);
+  // TValue = const char*, const char[N], const FlashStringHelper*
+  template <typename T>
+  bool add(const T *value) {
+    return add_impl<const T *>(value);
+  }
+  //
+  // bool add(TValue value, uint8_t decimals);
+  // TValue = float, double
+  template <typename T>
+  bool add(T value, uint8_t decimals) {
+    return add_impl<const JsonVariant &>(JsonVariant(value, decimals));
+  }
+
+  // Sets the value at specified index.
+  //
+  // bool add(size_t index, TValue);
+  // TValue = bool, long, int, short, float, double, RawJson, JsonVariant,
+  //          const std::string&, const String&,
+  //          const JsonArray&, const JsonObject&
+  template <typename T>
+  typename TypeTraits::EnableIf<!TypeTraits::IsArray<T>::value, bool>::type set(
+      size_t index, const T &value) {
+    return set_impl<const T &>(index, value);
+  }
+  //
+  // bool add(size_t index, TValue);
+  // TValue = const char*, const char[N], const FlashStringHelper*
+  template <typename T>
+  bool set(size_t index, const T *value) {
+    return set_impl<const T *>(index, value);
+  }
+  //
+  // bool set(size_t index, TValue value, uint8_t decimals);
+  // TValue = float, double
+  template <typename T>
+  typename TypeTraits::EnableIf<TypeTraits::IsFloatingPoint<T>::value,
+                                bool>::type
+  set(size_t index, T value, uint8_t decimals) {
+    return set_impl<const JsonVariant &>(index, JsonVariant(value, decimals));
+  }
+
+  // Gets the value at the specified index.
+  template <typename T>
+  typename Internals::JsonVariantAs<T>::type get(size_t index) const {
+    node_type *node = findNode(index);
+    return node ? node->content.as<T>()
+                : Internals::JsonVariantDefault<T>::get();
+  }
+
+  // Check the type of the value at specified index.
+  template <typename T>
+  bool is(size_t index) const {
+    node_type *node = findNode(index);
+    return node ? node->content.is<T>() : false;
+  }
+
+  // Creates a JsonArray and adds a reference at the end of the array.
+  // It's a shortcut for JsonBuffer::createArray() and JsonArray::add()
+  JsonArray &createNestedArray();
+
+  // Creates a JsonObject and adds a reference at the end of the array.
+  // It's a shortcut for JsonBuffer::createObject() and JsonArray::add()
+  JsonObject &createNestedObject();
+
+  // Removes element at specified index.
+  void removeAt(size_t index) {
+    removeNode(findNode(index));
+  }
+
+  // Returns a reference an invalid JsonArray.
+  // This object is meant to replace a NULL pointer.
+  // This is used when memory allocation or JSON parsing fail.
+  static JsonArray &invalid() {
+    static JsonArray instance(NULL);
+    return instance;
+  }
+
+  // Imports a 1D array
+  template <typename T, size_t N>
+  bool copyFrom(T (&array)[N]) {
+    return copyFrom(array, N);
+  }
+
+  // Imports a 1D array
+  template <typename T>
+  bool copyFrom(T *array, size_t len) {
+    bool ok = true;
+    for (size_t i = 0; i < len; i++) {
+      ok &= add(array[i]);
+    }
+    return ok;
+  }
+
+  // Imports a 2D array
+  template <typename T, size_t N1, size_t N2>
+  bool copyFrom(T (&array)[N1][N2]) {
+    bool ok = true;
+    for (size_t i = 0; i < N1; i++) {
+      JsonArray &nestedArray = createNestedArray();
+      for (size_t j = 0; j < N2; j++) {
+        ok &= nestedArray.add(array[i][j]);
+      }
+    }
+    return ok;
+  }
+
+  // Exports a 1D array
+  template <typename T, size_t N>
+  size_t copyTo(T (&array)[N]) const {
+    return copyTo(array, N);
+  }
+
+  // Exports a 1D array
+  template <typename T>
+  size_t copyTo(T *array, size_t len) const {
+    size_t i = 0;
+    for (const_iterator it = begin(); it != end() && i < len; ++it)
+      array[i++] = *it;
+    return i;
+  }
+
+  // Exports a 2D array
+  template <typename T, size_t N1, size_t N2>
+  void copyTo(T (&array)[N1][N2]) const {
+    size_t i = 0;
+    for (const_iterator it = begin(); it != end() && i < N1; ++it) {
+      it->as<JsonArray>().copyTo(array[i++]);
+    }
+  }
+
+ private:
+  node_type *findNode(size_t index) const {
+    node_type *node = _firstNode;
+    while (node && index--) node = node->next;
+    return node;
+  }
+
+  template <typename TValueRef>
+  bool set_impl(size_t index, TValueRef value) {
+    node_type *node = findNode(index);
+    if (!node) return false;
+
+    return Internals::ValueSetter<TValueRef>::set(_buffer, node->content,
+                                                  value);
+  }
+
+  template <typename TValueRef>
+  bool add_impl(TValueRef value) {
+    node_type *node = addNewNode();
+    if (!node) return false;
+
+    return Internals::ValueSetter<TValueRef>::set(_buffer, node->content,
+                                                  value);
+  }
+};
+
+namespace Internals {
+template <>
+struct JsonVariantDefault<JsonArray> {
+  static JsonArray &get() {
+    return JsonArray::invalid();
+  }
+};
+}
+}
@@ -0,0 +1,29 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "JsonArray.hpp"
+#include "JsonArraySubscript.hpp"
+#include "JsonObject.hpp"
+
+namespace ArduinoJson {
+
+inline JsonArray &JsonArray::createNestedArray() {
+  if (!_buffer) return JsonArray::invalid();
+  JsonArray &array = _buffer->createArray();
+  add(array);
+  return array;
+}
+
+inline JsonObject &JsonArray::createNestedObject() {
+  if (!_buffer) return JsonObject::invalid();
+  JsonObject &object = _buffer->createObject();
+  add(object);
+  return object;
+}
+}
@@ -0,0 +1,123 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "Configuration.hpp"
+#include "JsonVariantBase.hpp"
+
+#ifdef _MSC_VER
+#pragma warning(push)
+#pragma warning(disable : 4522)
+#endif
+
+namespace ArduinoJson {
+class JsonArraySubscript : public JsonVariantBase<JsonArraySubscript> {
+ public:
+  FORCE_INLINE JsonArraySubscript(JsonArray& array, size_t index)
+      : _array(array), _index(index) {}
+
+  FORCE_INLINE JsonArraySubscript& operator=(const JsonArraySubscript& src) {
+    _array.set(_index, src);
+    return *this;
+  }
+
+  // Replaces the value
+  //
+  // operator=(TValue)
+  // TValue = bool, long, int, short, float, double, RawJson, JsonVariant,
+  //          const std::string&, const String&,
+  //          const JsonArray&, const JsonObject&
+  template <typename T>
+  FORCE_INLINE JsonArraySubscript& operator=(const T& src) {
+    _array.set(_index, src);
+    return *this;
+  }
+  //
+  // operator=(TValue)
+  // TValue = const char*, const char[N], const FlashStringHelper*
+  template <typename T>
+  FORCE_INLINE JsonArraySubscript& operator=(const T* src) {
+    _array.set(_index, src);
+    return *this;
+  }
+
+  FORCE_INLINE bool success() const {
+    return _index < _array.size();
+  }
+
+  template <typename T>
+  FORCE_INLINE typename Internals::JsonVariantAs<T>::type as() const {
+    return _array.get<T>(_index);
+  }
+
+  template <typename T>
+  FORCE_INLINE bool is() const {
+    return _array.is<T>(_index);
+  }
+
+  // Replaces the value
+  //
+  // bool set(TValue)
+  // TValue = bool, long, int, short, float, double, RawJson, JsonVariant,
+  //          const std::string&, const String&,
+  //          const JsonArray&, const JsonObject&
+  template <typename TValue>
+  FORCE_INLINE bool set(const TValue& value) {
+    return _array.set(_index, value);
+  }
+  //
+  // bool set(TValue)
+  // TValue = const char*, const char[N], const FlashStringHelper*
+  template <typename TValue>
+  FORCE_INLINE bool set(const TValue* value) {
+    return _array.set(_index, value);
+  }
+  //
+  // bool set(TValue, uint8_t decimals);
+  // TValue = float, double
+  template <typename TValue>
+  FORCE_INLINE bool set(const TValue& value, uint8_t decimals) {
+    return _array.set(_index, value, decimals);
+  }
+
+ private:
+  JsonArray& _array;
+  const size_t _index;
+};
+
+#if ARDUINOJSON_ENABLE_STD_STREAM
+inline std::ostream& operator<<(std::ostream& os,
+                                const JsonArraySubscript& source) {
+  return source.printTo(os);
+}
+#endif
+
+inline JsonArraySubscript JsonArray::operator[](size_t index) {
+  return JsonArraySubscript(*this, index);
+}
+
+inline const JsonArraySubscript JsonArray::operator[](size_t index) const {
+  return JsonArraySubscript(*const_cast<JsonArray*>(this), index);
+}
+
+template <typename TImplem>
+inline JsonArraySubscript JsonVariantBase<TImplem>::operator[](int index) {
+  return as<JsonArray>()[index];
+}
+
+template <typename TImplem>
+inline const JsonArraySubscript JsonVariantBase<TImplem>::operator[](
+    int index) const {
+  return as<JsonArray>()[index];
+}
+
+}  // namespace ArduinoJson
+
+#ifdef _MSC_VER
+#pragma warning(pop)
+#endif
@@ -0,0 +1,97 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include <stddef.h>  // for size_t
+#include <stdint.h>  // for uint8_t
+#include <string.h>
+
+#include "JsonVariant.hpp"
+#include "TypeTraits/EnableIf.hpp"
+#include "TypeTraits/IsArray.hpp"
+
+#if defined(__clang__)
+#pragma clang diagnostic push
+#pragma clang diagnostic ignored "-Wnon-virtual-dtor"
+#elif defined(__GNUC__)
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#pragma GCC diagnostic push
+#endif
+#pragma GCC diagnostic ignored "-Wnon-virtual-dtor"
+#endif
+
+namespace ArduinoJson {
+class JsonArray;
+class JsonObject;
+
+// Entry point for using the library.
+//
+// Handle the memory management (done in derived classes) and calls the parser.
+// This abstract class is implemented by StaticJsonBuffer which implements a
+// fixed memory allocation.
+class JsonBuffer {
+ public:
+  // CAUTION: NO VIRTUAL DESTRUCTOR!
+  // If we add a virtual constructor the Arduino compiler will add malloc() and
+  // free() to the binary, adding 706 useless bytes.
+  // virtual ~JsonBuffer() {}
+
+  // Allocates an empty JsonArray.
+  //
+  // Returns a reference to the new JsonArray or JsonArray::invalid() if the
+  // allocation fails.
+  JsonArray &createArray();
+
+  // Allocates an empty JsonObject.
+  //
+  // Returns a reference to the new JsonObject or JsonObject::invalid() if the
+  // allocation fails.
+  JsonObject &createObject();
+
+  // Duplicates a string
+  //
+  // char* strdup(TValue);
+  // TValue = const std::string&, const String&,
+  template <typename TString>
+  typename TypeTraits::EnableIf<!TypeTraits::IsArray<TString>::value,
+                                char *>::type
+  strdup(const TString &src) {
+    return Internals::StringTraits<TString>::duplicate(src, this);
+  }
+  //
+  // char* strdup(TValue);
+  // TValue = const char*, const char[N], const FlashStringHelper*
+  template <typename TString>
+  char *strdup(const TString *src) {
+    return Internals::StringTraits<const TString *>::duplicate(src, this);
+  }
+
+  // Allocates n bytes in the JsonBuffer.
+  // Return a pointer to the allocated memory or NULL if allocation fails.
+  virtual void *alloc(size_t size) = 0;
+
+ protected:
+  // Preserve aligment if necessary
+  static FORCE_INLINE size_t round_size_up(size_t bytes) {
+#if ARDUINOJSON_ENABLE_ALIGNMENT
+    const size_t x = sizeof(void *) - 1;
+    return (bytes + x) & ~x;
+#else
+    return bytes;
+#endif
+  }
+};
+}
+
+#if defined(__clang__)
+#pragma clang diagnostic pop
+#elif defined(__GNUC__)
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#pragma GCC diagnostic pop
+#endif
+#endif
@@ -0,0 +1,143 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "Deserialization/JsonParser.hpp"
+
+#if defined(__clang__)
+#pragma clang diagnostic push
+#pragma clang diagnostic ignored "-Wnon-virtual-dtor"
+#elif defined(__GNUC__)
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#pragma GCC diagnostic push
+#endif
+#pragma GCC diagnostic ignored "-Wnon-virtual-dtor"
+#endif
+
+namespace ArduinoJson {
+template <typename TDerived>
+class JsonBufferBase : public JsonBuffer {
+ public:
+  // Allocates and populate a JsonArray from a JSON string.
+  //
+  // The First argument is a pointer to the JSON string, the memory must be
+  // writable
+  // because the parser will insert null-terminators and replace escaped chars.
+  //
+  // The second argument set the nesting limit
+  //
+  // Returns a reference to the new JsonObject or JsonObject::invalid() if the
+  // allocation fails.
+  // With this overload, the JsonBuffer will make a copy of the string
+  //
+  // JsonArray& parseArray(TString);
+  // TString = const std::string&, const String&
+  template <typename TString>
+  typename TypeTraits::EnableIf<!TypeTraits::IsArray<TString>::value,
+                                JsonArray &>::type
+  parseArray(const TString &json,
+             uint8_t nestingLimit = ARDUINOJSON_DEFAULT_NESTING_LIMIT) {
+    return Internals::makeParser(that(), json, nestingLimit).parseArray();
+  }
+  //
+  // JsonArray& parseArray(TString);
+  // TString = const char*, const char[N], const FlashStringHelper*
+  template <typename TString>
+  JsonArray &parseArray(
+      TString *json, uint8_t nestingLimit = ARDUINOJSON_DEFAULT_NESTING_LIMIT) {
+    return Internals::makeParser(that(), json, nestingLimit).parseArray();
+  }
+  //
+  // JsonArray& parseArray(TString);
+  // TString = std::istream&, Stream&
+  template <typename TString>
+  JsonArray &parseArray(
+      TString &json, uint8_t nestingLimit = ARDUINOJSON_DEFAULT_NESTING_LIMIT) {
+    return Internals::makeParser(that(), json, nestingLimit).parseArray();
+  }
+
+  // Allocates and populate a JsonObject from a JSON string.
+  //
+  // The First argument is a pointer to the JSON string, the memory must be
+  // writable
+  // because the parser will insert null-terminators and replace escaped chars.
+  //
+  // The second argument set the nesting limit
+  //
+  // Returns a reference to the new JsonObject or JsonObject::invalid() if the
+  // allocation fails.
+  //
+  // JsonObject& parseObject(TString);
+  // TString = const std::string&, const String&
+  template <typename TString>
+  typename TypeTraits::EnableIf<!TypeTraits::IsArray<TString>::value,
+                                JsonObject &>::type
+  parseObject(const TString &json,
+              uint8_t nestingLimit = ARDUINOJSON_DEFAULT_NESTING_LIMIT) {
+    return Internals::makeParser(that(), json, nestingLimit).parseObject();
+  }
+  //
+  // JsonObject& parseObject(TString);
+  // TString = const char*, const char[N], const FlashStringHelper*
+  template <typename TString>
+  JsonObject &parseObject(
+      TString *json, uint8_t nestingLimit = ARDUINOJSON_DEFAULT_NESTING_LIMIT) {
+    return Internals::makeParser(that(), json, nestingLimit).parseObject();
+  }
+  //
+  // JsonObject& parseObject(TString);
+  // TString = std::istream&, Stream&
+  template <typename TString>
+  JsonObject &parseObject(
+      TString &json, uint8_t nestingLimit = ARDUINOJSON_DEFAULT_NESTING_LIMIT) {
+    return Internals::makeParser(that(), json, nestingLimit).parseObject();
+  }
+
+  // Generalized version of parseArray() and parseObject(), also works for
+  // integral types.
+  //
+  // JsonVariant parse(TString);
+  // TString = const std::string&, const String&
+  template <typename TString>
+  typename TypeTraits::EnableIf<!TypeTraits::IsArray<TString>::value,
+                                JsonVariant>::type
+  parse(const TString &json,
+        uint8_t nestingLimit = ARDUINOJSON_DEFAULT_NESTING_LIMIT) {
+    return Internals::makeParser(that(), json, nestingLimit).parseVariant();
+  }
+  //
+  // JsonVariant parse(TString);
+  // TString = const char*, const char[N], const FlashStringHelper*
+  template <typename TString>
+  JsonVariant parse(TString *json,
+                    uint8_t nestingLimit = ARDUINOJSON_DEFAULT_NESTING_LIMIT) {
+    return Internals::makeParser(that(), json, nestingLimit).parseVariant();
+  }
+  //
+  // JsonVariant parse(TString);
+  // TString = std::istream&, Stream&
+  template <typename TString>
+  JsonVariant parse(TString &json,
+                    uint8_t nestingLimit = ARDUINOJSON_DEFAULT_NESTING_LIMIT) {
+    return Internals::makeParser(that(), json, nestingLimit).parseVariant();
+  }
+
+ private:
+  TDerived *that() {
+    return static_cast<TDerived *>(this);
+  }
+};
+}
+
+#if defined(__clang__)
+#pragma clang diagnostic pop
+#elif defined(__GNUC__)
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#pragma GCC diagnostic pop
+#endif
+#endif
@@ -0,0 +1,20 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "Deserialization/JsonParser.hpp"
+
+inline ArduinoJson::JsonArray &ArduinoJson::JsonBuffer::createArray() {
+  JsonArray *ptr = new (this) JsonArray(this);
+  return ptr ? *ptr : JsonArray::invalid();
+}
+
+inline ArduinoJson::JsonObject &ArduinoJson::JsonBuffer::createObject() {
+  JsonObject *ptr = new (this) JsonObject(this);
+  return ptr ? *ptr : JsonObject::invalid();
+}
@@ -0,0 +1,341 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "Data/JsonBufferAllocated.hpp"
+#include "Data/List.hpp"
+#include "Data/ReferenceType.hpp"
+#include "Data/ValueSetter.hpp"
+#include "JsonPair.hpp"
+#include "Serialization/JsonPrintable.hpp"
+#include "StringTraits/StringTraits.hpp"
+#include "TypeTraits/EnableIf.hpp"
+#include "TypeTraits/IsArray.hpp"
+#include "TypeTraits/IsFloatingPoint.hpp"
+#include "TypeTraits/IsSame.hpp"
+
+// Returns the size (in bytes) of an object with n elements.
+// Can be very handy to determine the size of a StaticJsonBuffer.
+#define JSON_OBJECT_SIZE(NUMBER_OF_ELEMENTS) \
+  (sizeof(JsonObject) + (NUMBER_OF_ELEMENTS) * sizeof(JsonObject::node_type))
+
+namespace ArduinoJson {
+
+// Forward declarations
+class JsonArray;
+class JsonBuffer;
+
+// A dictionary of JsonVariant indexed by string (char*)
+//
+// The constructor is private, instances must be created via
+// JsonBuffer::createObject() or JsonBuffer::parseObject().
+// A JsonObject can be serialized to a JSON string via JsonObject::printTo().
+// It can also be deserialized from a JSON string via JsonBuffer::parseObject().
+class JsonObject : public Internals::JsonPrintable<JsonObject>,
+                   public Internals::ReferenceType,
+                   public Internals::List<JsonPair>,
+                   public Internals::JsonBufferAllocated {
+ public:
+  // Create an empty JsonArray attached to the specified JsonBuffer.
+  // You should not use this constructor directly.
+  // Instead, use JsonBuffer::createObject() or JsonBuffer.parseObject().
+  explicit JsonObject(JsonBuffer* buffer) : Internals::List<JsonPair>(buffer) {}
+
+  // Gets or sets the value associated with the specified key.
+  //
+  // JsonObjectSubscript operator[](TKey)
+  // TKey = const std::string&, const String&
+  template <typename TString>
+  typename TypeTraits::EnableIf<!TypeTraits::IsArray<TString>::value,
+                                JsonObjectSubscript<const TString&> >::type
+  operator[](const TString& key) {
+    return JsonObjectSubscript<const TString&>(*this, key);
+  }
+  //
+  // JsonObjectSubscript operator[](TKey)
+  // TKey = const char*, const char[N], const FlashStringHelper*
+  template <typename TString>
+  JsonObjectSubscript<const TString*> operator[](const TString* key) {
+    return JsonObjectSubscript<const TString*>(*this, key);
+  }
+
+  // Gets the value associated with the specified key.
+  //
+  // const JsonObjectSubscript operator[](TKey) const;
+  // TKey = const std::string&, const String&
+  template <typename TString>
+  typename TypeTraits::EnableIf<
+      !TypeTraits::IsArray<TString>::value,
+      const JsonObjectSubscript<const TString&> >::type
+  operator[](const TString& key) const {
+    return JsonObjectSubscript<const TString&>(*const_cast<JsonObject*>(this),
+                                               key);
+  }
+  //
+  // const JsonObjectSubscript operator[](TKey) const;
+  // TKey = const char*, const char[N], const FlashStringHelper*
+  template <typename TString>
+  const JsonObjectSubscript<const TString*> operator[](
+      const TString* key) const {
+    return JsonObjectSubscript<const TString*>(*const_cast<JsonObject*>(this),
+                                               key);
+  }
+
+  // Sets the specified key with the specified value.
+  //
+  // bool set(TKey, TValue);
+  // TKey = const std::string&, const String&
+  // TValue = bool, long, int, short, float, double, RawJson, JsonVariant,
+  //          const std::string&, const String&,
+  //          const JsonArray&, const JsonObject&
+  template <typename TValue, typename TString>
+  typename TypeTraits::EnableIf<!TypeTraits::IsArray<TString>::value &&
+                                    !TypeTraits::IsArray<TValue>::value,
+                                bool>::type
+  set(const TString& key, const TValue& value) {
+    return set_impl<const TString&, const TValue&>(key, value);
+  }
+  //
+  // bool set(TKey, TValue);
+  // TKey = const std::string&, const String&
+  // TValue = const char*, const char[N], const FlashStringHelper*
+  template <typename TValue, typename TString>
+  typename TypeTraits::EnableIf<!TypeTraits::IsArray<TString>::value,
+                                bool>::type
+  set(const TString& key, const TValue* value) {
+    return set_impl<const TString&, const TValue*>(key, value);
+  }
+  //
+  // bool set(TKey, TValue);
+  // TKey = const char*, const char[N], const FlashStringHelper*
+  // TValue = bool, long, int, short, float, double, RawJson, JsonVariant,
+  //          const std::string&, const String&,
+  //          const JsonArray&, const JsonObject&
+  template <typename TValue, typename TString>
+  typename TypeTraits::EnableIf<!TypeTraits::IsArray<TValue>::value, bool>::type
+  set(const TString* key, const TValue& value) {
+    return set_impl<const TString*, const TValue&>(key, value);
+  }
+  //
+  // bool set(TKey, TValue);
+  // TKey = const char*, const char[N], const FlashStringHelper*
+  // TValue = const char*, const char[N], const FlashStringHelper*
+  template <typename TValue, typename TString>
+  bool set(const TString* key, const TValue* value) {
+    return set_impl<const TString*, const TValue*>(key, value);
+  }
+  //
+  // bool set(TKey, TValue, uint8_t decimals);
+  // TKey = const std::string&, const String&
+  // TValue = float, double
+  template <typename TValue, typename TString>
+  typename TypeTraits::EnableIf<TypeTraits::IsFloatingPoint<TValue>::value &&
+                                    !TypeTraits::IsArray<TString>::value,
+                                bool>::type
+  set(const TString& key, TValue value, uint8_t decimals) {
+    return set_impl<const TString&, const JsonVariant&>(
+        key, JsonVariant(value, decimals));
+  }
+  //
+  // bool set(TKey, TValue, uint8_t decimals);
+  // TKey = const char*, const char[N], const FlashStringHelper*
+  // TValue = float, double
+  template <typename TValue, typename TString>
+  typename TypeTraits::EnableIf<TypeTraits::IsFloatingPoint<TValue>::value,
+                                bool>::type
+  set(const TString* key, TValue value, uint8_t decimals) {
+    return set_impl<const TString*, const JsonVariant&>(
+        key, JsonVariant(value, decimals));
+  }
+
+  // Gets the value associated with the specified key.
+  //
+  // TValue get<TValue>(TKey);
+  // TKey = const std::string&, const String&
+  // TValue = bool, char, long, int, short, float, double,
+  //          const std::string&, const String&,
+  //          const JsonArray&, const JsonObject&
+  template <typename TValue, typename TString>
+  typename TypeTraits::EnableIf<
+      !TypeTraits::IsArray<TString>::value,
+      typename Internals::JsonVariantAs<TValue>::type>::type
+  get(const TString& key) const {
+    return get_impl<const TString&, TValue>(key);
+  }
+  //
+  // TValue get<TValue>(TKey);
+  // TKey = const char*, const char[N], const FlashStringHelper*
+  // TValue = bool, char, long, int, short, float, double,
+  //          const std::string&, const String&,
+  //          const JsonArray&, const JsonObject&
+  template <typename TValue, typename TString>
+  typename Internals::JsonVariantAs<TValue>::type get(
+      const TString* key) const {
+    return get_impl<const TString*, TValue>(key);
+  }
+
+  // Checks the type of the value associated with the specified key.
+  //
+  //
+  // bool is<TValue>(TKey) const;
+  // TKey = const std::string&, const String&
+  // TValue = bool, char, long, int, short, float, double,
+  //          const std::string&, const String&,
+  //          const JsonArray&, const JsonObject&
+  template <typename TValue, typename TString>
+  typename TypeTraits::EnableIf<!TypeTraits::IsArray<TString>::value,
+                                bool>::type
+  is(const TString& key) const {
+    return is_impl<const TString&, TValue>(key);
+  }
+  //
+  // bool is<TValue>(TKey) const;
+  // TKey = const char*, const char[N], const FlashStringHelper*
+  // TValue = bool, char, long, int, short, float, double,
+  //          const std::string&, const String&,
+  //          const JsonArray&, const JsonObject&
+  template <typename TValue, typename TString>
+  bool is(const TString* key) const {
+    return is_impl<const TString*, TValue>(key);
+  }
+
+  // Creates and adds a JsonArray.
+  //
+  // JsonArray& createNestedArray(TKey);
+  // TKey = const std::string&, const String&
+  template <typename TString>
+  typename TypeTraits::EnableIf<!TypeTraits::IsArray<TString>::value,
+                                JsonArray&>::type
+  createNestedArray(const TString& key) {
+    return createNestedArray_impl<const TString&>(key);
+  }
+  // JsonArray& createNestedArray(TKey);
+  // TKey = const char*, const char[N], const FlashStringHelper*
+  template <typename TString>
+  JsonArray& createNestedArray(const TString* key) {
+    return createNestedArray_impl<const TString*>(key);
+  }
+
+  // Creates and adds a JsonObject.
+  //
+  // JsonObject& createNestedObject(TKey);
+  // TKey = const std::string&, const String&
+  template <typename TString>
+  typename TypeTraits::EnableIf<!TypeTraits::IsArray<TString>::value,
+                                JsonObject&>::type
+  createNestedObject(const TString& key) {
+    return createNestedObject_impl<const TString&>(key);
+  }
+  //
+  // JsonObject& createNestedObject(TKey);
+  // TKey = const char*, const char[N], const FlashStringHelper*
+  template <typename TString>
+  JsonObject& createNestedObject(const TString* key) {
+    return createNestedObject_impl<const TString*>(key);
+  }
+
+  // Tells weither the specified key is present and associated with a value.
+  //
+  // bool containsKey(TKey);
+  // TKey = const std::string&, const String&
+  template <typename TString>
+  typename TypeTraits::EnableIf<!TypeTraits::IsArray<TString>::value,
+                                bool>::type
+  containsKey(const TString& key) const {
+    return findNode<const TString&>(key) != NULL;
+  }
+  //
+  // bool containsKey(TKey);
+  // TKey = const char*, const char[N], const FlashStringHelper*
+  template <typename TString>
+  bool containsKey(const TString* key) const {
+    return findNode<const TString*>(key) != NULL;
+  }
+
+  // Removes the specified key and the associated value.
+  //
+  // void remove(TKey);
+  // TKey = const std::string&, const String&
+  template <typename TString>
+  typename TypeTraits::EnableIf<!TypeTraits::IsArray<TString>::value,
+                                void>::type
+  remove(const TString& key) {
+    removeNode(findNode<const TString&>(key));
+  }
+  //
+  // void remove(TKey);
+  // TKey = const char*, const char[N], const FlashStringHelper*
+  template <typename TString>
+  void remove(const TString* key) {
+    removeNode(findNode<const TString*>(key));
+  }
+
+  // Returns a reference an invalid JsonObject.
+  // This object is meant to replace a NULL pointer.
+  // This is used when memory allocation or JSON parsing fail.
+  static JsonObject& invalid() {
+    static JsonObject instance(NULL);
+    return instance;
+  }
+
+ private:
+  // Returns the list node that matches the specified key.
+  template <typename TStringRef>
+  node_type* findNode(TStringRef key) const {
+    for (node_type* node = _firstNode; node; node = node->next) {
+      if (Internals::StringTraits<TStringRef>::equals(key, node->content.key))
+        return node;
+    }
+    return NULL;
+  }
+
+  template <typename TStringRef, typename TValue>
+  typename Internals::JsonVariantAs<TValue>::type get_impl(
+      TStringRef key) const {
+    node_type* node = findNode<TStringRef>(key);
+    return node ? node->content.value.as<TValue>()
+                : Internals::JsonVariantDefault<TValue>::get();
+  }
+
+  template <typename TStringRef, typename TValueRef>
+  bool set_impl(TStringRef key, TValueRef value) {
+    node_type* node = findNode<TStringRef>(key);
+    if (!node) {
+      node = addNewNode();
+      if (!node) return false;
+
+      bool key_ok = Internals::ValueSetter<TStringRef>::set(
+          _buffer, node->content.key, key);
+      if (!key_ok) return false;
+    }
+    return Internals::ValueSetter<TValueRef>::set(_buffer, node->content.value,
+                                                  value);
+  }
+
+  template <typename TStringRef, typename TValue>
+  bool is_impl(TStringRef key) const {
+    node_type* node = findNode<TStringRef>(key);
+    return node ? node->content.value.is<TValue>() : false;
+  }
+
+  template <typename TStringRef>
+  JsonArray& createNestedArray_impl(TStringRef key);
+
+  template <typename TStringRef>
+  JsonObject& createNestedObject_impl(TStringRef key);
+};
+
+namespace Internals {
+template <>
+struct JsonVariantDefault<JsonObject> {
+  static JsonObject& get() {
+    return JsonObject::invalid();
+  }
+};
+}
+}
@@ -0,0 +1,31 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "JsonArray.hpp"
+#include "JsonObject.hpp"
+#include "JsonObjectSubscript.hpp"
+
+namespace ArduinoJson {
+
+template <typename TStringRef>
+inline JsonArray &JsonObject::createNestedArray_impl(TStringRef key) {
+  if (!_buffer) return JsonArray::invalid();
+  JsonArray &array = _buffer->createArray();
+  set(key, array);
+  return array;
+}
+
+template <typename TStringRef>
+inline JsonObject &JsonObject::createNestedObject_impl(TStringRef key) {
+  if (!_buffer) return JsonObject::invalid();
+  JsonObject &object = _buffer->createObject();
+  set(key, object);
+  return object;
+}
+}
@@ -0,0 +1,116 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "Configuration.hpp"
+#include "JsonVariantBase.hpp"
+#include "TypeTraits/EnableIf.hpp"
+
+#ifdef _MSC_VER
+#pragma warning(push)
+#pragma warning(disable : 4522)
+#endif
+
+namespace ArduinoJson {
+
+template <typename TStringRef>
+class JsonObjectSubscript
+    : public JsonVariantBase<JsonObjectSubscript<TStringRef> > {
+  typedef JsonObjectSubscript<TStringRef> this_type;
+
+ public:
+  FORCE_INLINE JsonObjectSubscript(JsonObject& object, TStringRef key)
+      : _object(object), _key(key) {}
+
+  FORCE_INLINE this_type& operator=(const this_type& src) {
+    _object.set(_key, src);
+    return *this;
+  }
+
+  // Set the specified value
+  //
+  // operator=(TValue);
+  // TValue = bool, char, long, int, short, float, double,
+  //          const std::string&, const String&,
+  //          const JsonArray&, const JsonObject&
+  template <typename TValue>
+  FORCE_INLINE
+      typename TypeTraits::EnableIf<!TypeTraits::IsArray<TValue>::value,
+                                    this_type&>::type
+      operator=(const TValue& src) {
+    _object.set(_key, src);
+    return *this;
+  }
+  //
+  // operator=(TValue);
+  // TValue = const char*, const char[N], const FlashStringHelper*
+  template <typename TValue>
+  FORCE_INLINE this_type& operator=(const TValue* src) {
+    _object.set(_key, src);
+    return *this;
+  }
+
+  FORCE_INLINE bool success() const {
+    return _object.containsKey(_key);
+  }
+
+  template <typename TValue>
+  FORCE_INLINE typename Internals::JsonVariantAs<TValue>::type as() const {
+    return _object.get<TValue>(_key);
+  }
+
+  template <typename TValue>
+  FORCE_INLINE bool is() const {
+    return _object.is<TValue>(_key);
+  }
+
+  // Sets the specified value.
+  //
+  // bool set(TValue);
+  // TValue = bool, char, long, int, short, float, double, RawJson, JsonVariant,
+  //          const std::string&, const String&,
+  //          const JsonArray&, const JsonObject&
+  template <typename TValue>
+  FORCE_INLINE
+      typename TypeTraits::EnableIf<!TypeTraits::IsArray<TValue>::value,
+                                    bool>::type
+      set(const TValue& value) {
+    return _object.set(_key, value);
+  }
+  //
+  // bool set(TValue);
+  // TValue = const char*, const char[N], const FlashStringHelper*
+  template <typename TValue>
+  FORCE_INLINE bool set(const TValue* value) {
+    return _object.set(_key, value);
+  }
+  //
+  // bool set(TValue, uint8_t decimals);
+  // TValue = float, double
+  template <typename TValue>
+  FORCE_INLINE bool set(const TValue& value, uint8_t decimals) {
+    return _object.set(_key, value, decimals);
+  }
+
+ private:
+  JsonObject& _object;
+  TStringRef _key;
+};
+
+#if ARDUINOJSON_ENABLE_STD_STREAM
+template <typename TStringRef>
+inline std::ostream& operator<<(std::ostream& os,
+                                const JsonObjectSubscript<TStringRef>& source) {
+  return source.printTo(os);
+}
+#endif
+}  // namespace ArduinoJson
+
+#ifdef _MSC_VER
+#pragma warning(pop)
+#endif
@@ -0,0 +1,19 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "JsonVariant.hpp"
+
+namespace ArduinoJson {
+
+// A key value pair for JsonObject.
+struct JsonPair {
+  const char* key;
+  JsonVariant value;
+};
+}
@@ -0,0 +1,357 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include <stddef.h>
+#include <stdint.h>  // for uint8_t
+
+#include "Data/JsonVariantContent.hpp"
+#include "Data/JsonVariantDefault.hpp"
+#include "Data/JsonVariantType.hpp"
+#include "JsonVariantBase.hpp"
+#include "RawJson.hpp"
+#include "Serialization/JsonPrintable.hpp"
+#include "TypeTraits/EnableIf.hpp"
+#include "TypeTraits/IsChar.hpp"
+#include "TypeTraits/IsFloatingPoint.hpp"
+#include "TypeTraits/IsIntegral.hpp"
+#include "TypeTraits/IsSame.hpp"
+#include "TypeTraits/IsSignedIntegral.hpp"
+#include "TypeTraits/IsUnsignedIntegral.hpp"
+#include "TypeTraits/RemoveConst.hpp"
+#include "TypeTraits/RemoveReference.hpp"
+
+namespace ArduinoJson {
+
+// Forward declarations.
+class JsonArray;
+class JsonObject;
+
+// A variant that can be a any value serializable to a JSON value.
+//
+// It can be set to:
+// - a boolean
+// - a char, short, int or a long (signed or unsigned)
+// - a string (const char*)
+// - a reference to a JsonArray or JsonObject
+class JsonVariant : public JsonVariantBase<JsonVariant> {
+  friend void Internals::JsonSerializer::serialize(const JsonVariant &,
+                                                   JsonWriter &);
+
+ public:
+  // Creates an uninitialized JsonVariant
+  JsonVariant() : _type(Internals::JSON_UNDEFINED) {}
+
+  // Create a JsonVariant containing a boolean value.
+  // It will be serialized as "true" or "false" in JSON.
+  JsonVariant(bool value) {
+    using namespace Internals;
+    _type = JSON_BOOLEAN;
+    _content.asInteger = static_cast<JsonInteger>(value);
+  }
+
+  // Create a JsonVariant containing a floating point value.
+  // The second argument specifies the number of decimal digits to write in
+  // the JSON string.
+  // JsonVariant(double value, uint8_t decimals);
+  // JsonVariant(float value, uint8_t decimals);
+  template <typename T>
+  JsonVariant(T value, uint8_t decimals = 2,
+              typename TypeTraits::EnableIf<
+                  TypeTraits::IsFloatingPoint<T>::value>::type * = 0) {
+    using namespace Internals;
+    _type = static_cast<JsonVariantType>(JSON_FLOAT_0_DECIMALS + decimals);
+    _content.asFloat = static_cast<JsonFloat>(value);
+  }
+
+  // Create a JsonVariant containing an integer value.
+  // JsonVariant(signed short)
+  // JsonVariant(signed int)
+  // JsonVariant(signed long)
+  template <typename T>
+  JsonVariant(T value,
+              typename TypeTraits::EnableIf<
+                  TypeTraits::IsSignedIntegral<T>::value>::type * = 0) {
+    using namespace Internals;
+    if (value >= 0) {
+      _type = JSON_POSITIVE_INTEGER;
+      _content.asInteger = static_cast<JsonUInt>(value);
+    } else {
+      _type = JSON_NEGATIVE_INTEGER;
+      _content.asInteger = static_cast<JsonUInt>(-value);
+    }
+  }
+  // JsonVariant(unsigned short)
+  // JsonVariant(unsigned int)
+  // JsonVariant(unsigned long)
+  template <typename T>
+  JsonVariant(T value,
+              typename TypeTraits::EnableIf<
+                  TypeTraits::IsUnsignedIntegral<T>::value>::type * = 0) {
+    using namespace Internals;
+    _type = JSON_POSITIVE_INTEGER;
+    _content.asInteger = static_cast<JsonUInt>(value);
+  }
+
+  // Create a JsonVariant containing a string.
+  // JsonVariant(const char*);
+  // JsonVariant(const signed char*);
+  // JsonVariant(const unsigned char*);
+  template <typename TChar>
+  JsonVariant(
+      const TChar *value,
+      typename TypeTraits::EnableIf<TypeTraits::IsChar<TChar>::value>::type * =
+          0) {
+    _type = Internals::JSON_STRING;
+    _content.asString = reinterpret_cast<const char *>(value);
+  }
+
+  // Create a JsonVariant containing an unparsed string
+  JsonVariant(RawJson value) {
+    _type = Internals::JSON_UNPARSED;
+    _content.asString = value;
+  }
+
+  // Create a JsonVariant containing a reference to an array.
+  // CAUTION: we are lying about constness, because the array can be modified if
+  // the variant is converted back to a JsonArray&
+  JsonVariant(const JsonArray &array);
+
+  // Create a JsonVariant containing a reference to an object.
+  // CAUTION: we are lying about constness, because the object can be modified
+  // if the variant is converted back to a JsonObject&
+  JsonVariant(const JsonObject &object);
+
+  // Get the variant as the specified type.
+  //
+  // short as<signed short>() const;
+  // int as<signed int>() const;
+  // long as<signed long>() const;
+  template <typename T>
+  const typename TypeTraits::EnableIf<TypeTraits::IsSignedIntegral<T>::value,
+                                      T>::type
+  as() const {
+    return static_cast<T>(variantAsInteger());
+  }
+  //
+  // short as<unsigned short>() const;
+  // int as<unsigned int>() const;
+  // long as<unsigned long>() const;
+  template <typename T>
+  const typename TypeTraits::EnableIf<TypeTraits::IsUnsignedIntegral<T>::value,
+                                      T>::type
+  as() const {
+    return static_cast<T>(asUnsignedInteger());
+  }
+  //
+  // double as<double>() const;
+  // float as<float>() const;
+  template <typename T>
+  const typename TypeTraits::EnableIf<TypeTraits::IsFloatingPoint<T>::value,
+                                      T>::type
+  as() const {
+    return static_cast<T>(variantAsFloat());
+  }
+  //
+  // const char* as<const char*>() const;
+  // const char* as<char*>() const;
+  template <typename T>
+  typename TypeTraits::EnableIf<TypeTraits::IsSame<T, const char *>::value ||
+                                    TypeTraits::IsSame<T, char *>::value,
+                                const char *>::type
+  as() const {
+    return variantAsString();
+  }
+  //
+  // std::string as<std::string>() const;
+  // String as<String>() const;
+  template <typename T>
+  typename TypeTraits::EnableIf<Internals::StringTraits<T>::has_append, T>::type
+  as() const {
+    const char *cstr = variantAsString();
+    if (cstr) return T(cstr);
+    T s;
+    printTo(s);
+    return s;
+  }
+  //
+  // const bool as<bool>() const
+  template <typename T>
+  const typename TypeTraits::EnableIf<TypeTraits::IsSame<T, bool>::value,
+                                      T>::type
+  as() const {
+    return variantAsInteger() != 0;
+  }
+  //
+  // JsonArray& as<JsonArray> const;
+  // JsonArray& as<JsonArray&> const;
+  template <typename T>
+  typename TypeTraits::EnableIf<
+      TypeTraits::IsSame<typename TypeTraits::RemoveReference<T>::type,
+                         JsonArray>::value,
+      JsonArray &>::type
+  as() const {
+    return variantAsArray();
+  }
+  //
+  // const JsonArray& as<const JsonArray&> const;
+  template <typename T>
+  typename TypeTraits::EnableIf<
+      TypeTraits::IsSame<typename TypeTraits::RemoveReference<T>::type,
+                         const JsonArray>::value,
+      const JsonArray &>::type
+  as() const {
+    return variantAsArray();
+  }
+  //
+  // JsonObject& as<JsonObject> const;
+  // JsonObject& as<JsonObject&> const;
+  template <typename T>
+  typename TypeTraits::EnableIf<
+      TypeTraits::IsSame<typename TypeTraits::RemoveReference<T>::type,
+                         JsonObject>::value,
+      JsonObject &>::type
+  as() const {
+    return variantAsObject();
+  }
+  //
+  // JsonObject& as<const JsonObject> const;
+  // JsonObject& as<const JsonObject&> const;
+  template <typename T>
+  typename TypeTraits::EnableIf<
+      TypeTraits::IsSame<typename TypeTraits::RemoveReference<T>::type,
+                         const JsonObject>::value,
+      const JsonObject &>::type
+  as() const {
+    return variantAsObject();
+  }
+  //
+  // JsonVariant as<JsonVariant> const;
+  template <typename T>
+  typename TypeTraits::EnableIf<TypeTraits::IsSame<T, JsonVariant>::value,
+                                T>::type
+  as() const {
+    return *this;
+  }
+
+  // Tells weither the variant has the specified type.
+  // Returns true if the variant has type type T, false otherwise.
+  //
+  // short as<short>() const;
+  // int as<int>() const;
+  // long as<long>() const;
+  template <typename T>
+  const typename TypeTraits::EnableIf<TypeTraits::IsIntegral<T>::value &&
+                                          !TypeTraits::IsSame<T, bool>::value,
+                                      bool>::type
+  is() const {
+    return isInteger();
+  }
+  //
+  // double is<double>() const;
+  // float is<float>() const;
+  template <typename T>
+  const typename TypeTraits::EnableIf<TypeTraits::IsFloatingPoint<T>::value,
+                                      bool>::type
+  is() const {
+    return isFloat();
+  }
+  //
+  // const bool is<bool>() const
+  template <typename T>
+  const typename TypeTraits::EnableIf<TypeTraits::IsSame<T, bool>::value,
+                                      bool>::type
+  is() const {
+    return isBoolean();
+  }
+  //
+  // bool is<const char*>() const;
+  // bool is<char*>() const;
+  template <typename T>
+  typename TypeTraits::EnableIf<TypeTraits::IsSame<T, const char *>::value ||
+                                    TypeTraits::IsSame<T, char *>::value,
+                                bool>::type
+  is() const {
+    return isString();
+  }
+  //
+  // bool is<JsonArray> const;
+  // bool is<JsonArray&> const;
+  // bool is<const JsonArray&> const;
+  template <typename T>
+  typename TypeTraits::EnableIf<
+      TypeTraits::IsSame<
+          typename TypeTraits::RemoveConst<
+              typename TypeTraits::RemoveReference<T>::type>::type,
+          JsonArray>::value,
+      bool>::type
+  is() const {
+    return isArray();
+  }
+  //
+  // bool is<JsonObject> const;
+  // bool is<JsonObject&> const;
+  // bool is<const JsonObject&> const;
+  template <typename T>
+  typename TypeTraits::EnableIf<
+      TypeTraits::IsSame<
+          typename TypeTraits::RemoveConst<
+              typename TypeTraits::RemoveReference<T>::type>::type,
+          JsonObject>::value,
+      bool>::type
+  is() const {
+    return isObject();
+  }
+
+  // Returns true if the variant has a value
+  bool success() const {
+    return _type != Internals::JSON_UNDEFINED;
+  }
+
+ private:
+  // It's not allowed to store a char
+  template <typename T>
+  JsonVariant(T value, typename TypeTraits::EnableIf<
+                           TypeTraits::IsSame<T, char>::value>::type * = 0);
+
+  JsonArray &variantAsArray() const;
+  JsonObject &variantAsObject() const;
+  const char *variantAsString() const;
+  Internals::JsonFloat variantAsFloat() const;
+  Internals::JsonInteger variantAsInteger() const;
+  Internals::JsonUInt asUnsignedInteger() const;
+  bool isBoolean() const;
+  bool isFloat() const;
+  bool isInteger() const;
+  bool isArray() const {
+    return _type == Internals::JSON_ARRAY;
+  }
+  bool isObject() const {
+    return _type == Internals::JSON_OBJECT;
+  }
+  bool isString() const {
+    return _type == Internals::JSON_STRING ||
+           (_type == Internals::JSON_UNPARSED && _content.asString &&
+            !strcmp("null", _content.asString));
+  }
+
+  // The current type of the variant
+  Internals::JsonVariantType _type;
+
+  // The various alternatives for the value of the variant.
+  Internals::JsonVariantContent _content;
+};
+
+inline JsonVariant float_with_n_digits(float value, uint8_t digits) {
+  return JsonVariant(value, digits);
+}
+
+inline JsonVariant double_with_n_digits(double value, uint8_t digits) {
+  return JsonVariant(value, digits);
+}
+}
@@ -0,0 +1,139 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "Data/JsonVariantAs.hpp"
+#include "Polyfills/attributes.hpp"
+#include "Serialization/JsonPrintable.hpp"
+
+namespace ArduinoJson {
+
+// Forward declarations.
+class JsonArraySubscript;
+template <typename TKey>
+class JsonObjectSubscript;
+
+template <typename TImpl>
+class JsonVariantBase : public Internals::JsonPrintable<TImpl> {
+ public:
+#if ARDUINOJSON_ENABLE_DEPRECATED
+  DEPRECATED("use as<JsonArray>() instead")
+  FORCE_INLINE JsonArray &asArray() const {
+    return as<JsonArray>();
+  }
+
+  DEPRECATED("use as<JsonObject>() instead")
+  FORCE_INLINE JsonObject &asObject() const {
+    return as<JsonObject>();
+  }
+
+  DEPRECATED("use as<char*>() instead")
+  FORCE_INLINE const char *asString() const {
+    return as<const char *>();
+  }
+#endif
+
+  // Gets the variant as an array.
+  // Returns a reference to the JsonArray or JsonArray::invalid() if the
+  // variant
+  // is not an array.
+  FORCE_INLINE operator JsonArray &() const {
+    return as<JsonArray &>();
+  }
+
+  // Gets the variant as an object.
+  // Returns a reference to the JsonObject or JsonObject::invalid() if the
+  // variant is not an object.
+  FORCE_INLINE operator JsonObject &() const {
+    return as<JsonObject &>();
+  }
+
+  template <typename T>
+  FORCE_INLINE operator T() const {
+    return as<T>();
+  }
+
+  template <typename T>
+  FORCE_INLINE const typename Internals::JsonVariantAs<T>::type as() const {
+    return impl()->template as<T>();
+  }
+
+  template <typename T>
+  FORCE_INLINE bool is() const {
+    return impl()->template is<T>();
+  }
+
+  // Mimics an array or an object.
+  // Returns the size of the array or object if the variant has that type.
+  // Returns 0 if the variant is neither an array nor an object
+  size_t size() const {
+    return as<JsonArray>().size() + as<JsonObject>().size();
+  }
+
+  // Mimics an array.
+  // Returns the element at specified index if the variant is an array.
+  // Returns JsonVariant::invalid() if the variant is not an array.
+  FORCE_INLINE const JsonArraySubscript operator[](int index) const;
+  FORCE_INLINE JsonArraySubscript operator[](int index);
+
+  // Mimics an object.
+  // Returns the value associated with the specified key if the variant is
+  // an object.
+  // Return JsonVariant::invalid() if the variant is not an object.
+  //
+  // const JsonObjectSubscript operator[](TKey) const;
+  // TKey = const std::string&, const String&
+  template <typename TString>
+  FORCE_INLINE typename TypeTraits::EnableIf<
+      Internals::StringTraits<TString>::has_equals,
+      const JsonObjectSubscript<const TString &> >::type
+  operator[](const TString &key) const {
+    return as<JsonObject>()[key];
+  }
+  //
+  // const JsonObjectSubscript operator[](TKey) const;
+  // TKey = const std::string&, const String&
+  template <typename TString>
+  FORCE_INLINE typename TypeTraits::EnableIf<
+      Internals::StringTraits<TString>::has_equals,
+      JsonObjectSubscript<const TString &> >::type
+  operator[](const TString &key) {
+    return as<JsonObject>()[key];
+  }
+  //
+  // JsonObjectSubscript operator[](TKey);
+  // TKey = const char*, const char[N], const FlashStringHelper*
+  template <typename TString>
+  FORCE_INLINE typename TypeTraits::EnableIf<
+      Internals::StringTraits<const TString *>::has_equals,
+      JsonObjectSubscript<const TString *> >::type
+  operator[](const TString *key) {
+    return as<JsonObject>()[key];
+  }
+  //
+  // JsonObjectSubscript operator[](TKey);
+  // TKey = const char*, const char[N], const FlashStringHelper*
+  template <typename TString>
+  FORCE_INLINE typename TypeTraits::EnableIf<
+      Internals::StringTraits<TString *>::has_equals,
+      const JsonObjectSubscript<const TString *> >::type
+  operator[](const TString *key) const {
+    return as<JsonObject>()[key];
+  }
+
+ private:
+  const TImpl *impl() const {
+    return static_cast<const TImpl *>(this);
+  }
+};
+
+namespace TypeTraits {
+template <typename T>
+struct IsVariant : IsBaseOf<JsonVariantBase<T>, T> {};
+}
+}
@@ -0,0 +1,88 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "Data/JsonVariantComparer.hpp"
+
+namespace ArduinoJson {
+template <typename TVariant, typename TComparand>
+inline bool operator==(const JsonVariantBase<TVariant> &variant,
+                       TComparand comparand) {
+  return Internals::JsonVariantComparer<TComparand>::equals(variant, comparand);
+}
+
+template <typename TVariant, typename TComparand>
+inline typename TypeTraits::EnableIf<!TypeTraits::IsVariant<TComparand>::value,
+                                     bool>::type
+operator==(TComparand comparand, const JsonVariantBase<TVariant> &variant) {
+  return Internals::JsonVariantComparer<TComparand>::equals(variant, comparand);
+}
+
+template <typename TVariant, typename TComparand>
+inline bool operator!=(const JsonVariantBase<TVariant> &variant,
+                       TComparand comparand) {
+  return !Internals::JsonVariantComparer<TComparand>::equals(variant,
+                                                             comparand);
+}
+
+template <typename TVariant, typename TComparand>
+inline typename TypeTraits::EnableIf<!TypeTraits::IsVariant<TComparand>::value,
+                                     bool>::type
+operator!=(TComparand comparand, const JsonVariantBase<TVariant> &variant) {
+  return !Internals::JsonVariantComparer<TComparand>::equals(variant,
+                                                             comparand);
+}
+
+template <typename TVariant, typename TComparand>
+inline bool operator<=(const JsonVariantBase<TVariant> &left,
+                       TComparand right) {
+  return left.template as<TComparand>() <= right;
+}
+
+template <typename TVariant, typename TComparand>
+inline bool operator<=(TComparand comparand,
+                       const JsonVariantBase<TVariant> &variant) {
+  return comparand <= variant.template as<TComparand>();
+}
+
+template <typename TVariant, typename TComparand>
+inline bool operator>=(const JsonVariantBase<TVariant> &variant,
+                       TComparand comparand) {
+  return variant.template as<TComparand>() >= comparand;
+}
+
+template <typename TVariant, typename TComparand>
+inline bool operator>=(TComparand comparand,
+                       const JsonVariantBase<TVariant> &variant) {
+  return comparand >= variant.template as<TComparand>();
+}
+
+template <typename TVariant, typename TComparand>
+inline bool operator<(const JsonVariantBase<TVariant> &varian,
+                      TComparand comparand) {
+  return varian.template as<TComparand>() < comparand;
+}
+
+template <typename TVariant, typename TComparand>
+inline bool operator<(TComparand comparand,
+                      const JsonVariantBase<TVariant> &variant) {
+  return comparand < variant.template as<TComparand>();
+}
+
+template <typename TVariant, typename TComparand>
+inline bool operator>(const JsonVariantBase<TVariant> &variant,
+                      TComparand comparand) {
+  return variant.template as<TComparand>() > comparand;
+}
+
+template <typename TVariant, typename TComparand>
+inline bool operator>(TComparand comparand,
+                      const JsonVariantBase<TVariant> &variant) {
+  return comparand > variant.template as<TComparand>();
+}
+}
@@ -0,0 +1,159 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "Configuration.hpp"
+#include "Data/Parse.hpp"
+#include "JsonArray.hpp"
+#include "JsonObject.hpp"
+#include "JsonVariant.hpp"
+
+#include <errno.h>   // for errno
+#include <stdlib.h>  // for strtol, strtod
+#include <string.h>  // for strcmp
+
+namespace ArduinoJson {
+
+inline JsonVariant::JsonVariant(const JsonArray &array) {
+  if (array.success()) {
+    _type = Internals::JSON_ARRAY;
+    _content.asArray = const_cast<JsonArray *>(&array);
+  } else {
+    _type = Internals::JSON_UNDEFINED;
+  }
+}
+
+inline JsonVariant::JsonVariant(const JsonObject &object) {
+  if (object.success()) {
+    _type = Internals::JSON_OBJECT;
+    _content.asObject = const_cast<JsonObject *>(&object);
+  } else {
+    _type = Internals::JSON_UNDEFINED;
+  }
+}
+
+inline JsonArray &JsonVariant::variantAsArray() const {
+  if (_type == Internals::JSON_ARRAY) return *_content.asArray;
+  return JsonArray::invalid();
+}
+
+inline JsonObject &JsonVariant::variantAsObject() const {
+  if (_type == Internals::JSON_OBJECT) return *_content.asObject;
+  return JsonObject::invalid();
+}
+
+inline Internals::JsonInteger JsonVariant::variantAsInteger() const {
+  using namespace Internals;
+  switch (_type) {
+    case JSON_UNDEFINED:
+      return 0;
+    case JSON_POSITIVE_INTEGER:
+    case JSON_BOOLEAN:
+      return _content.asInteger;
+    case JSON_NEGATIVE_INTEGER:
+      return -static_cast<Internals::JsonInteger>(_content.asInteger);
+    case JSON_STRING:
+    case JSON_UNPARSED:
+      if (!_content.asString) return 0;
+      if (!strcmp("true", _content.asString)) return 1;
+      return parse<Internals::JsonInteger>(_content.asString);
+    default:
+      return static_cast<Internals::JsonInteger>(_content.asFloat);
+  }
+}
+
+inline Internals::JsonUInt JsonVariant::asUnsignedInteger() const {
+  using namespace Internals;
+  switch (_type) {
+    case JSON_UNDEFINED:
+      return 0;
+    case JSON_POSITIVE_INTEGER:
+    case JSON_BOOLEAN:
+    case JSON_NEGATIVE_INTEGER:
+      return _content.asInteger;
+    case JSON_STRING:
+    case JSON_UNPARSED:
+      if (!_content.asString) return 0;
+      if (!strcmp("true", _content.asString)) return 1;
+      return parse<Internals::JsonUInt>(_content.asString);
+    default:
+      return static_cast<Internals::JsonUInt>(_content.asFloat);
+  }
+}
+
+inline const char *JsonVariant::variantAsString() const {
+  using namespace Internals;
+  if (_type == JSON_UNPARSED && _content.asString &&
+      !strcmp("null", _content.asString))
+    return NULL;
+  if (_type == JSON_STRING || _type == JSON_UNPARSED) return _content.asString;
+  return NULL;
+}
+
+inline Internals::JsonFloat JsonVariant::variantAsFloat() const {
+  using namespace Internals;
+  switch (_type) {
+    case JSON_UNDEFINED:
+      return 0;
+    case JSON_POSITIVE_INTEGER:
+    case JSON_BOOLEAN:
+      return static_cast<JsonFloat>(_content.asInteger);
+    case JSON_NEGATIVE_INTEGER:
+      return -static_cast<JsonFloat>(_content.asInteger);
+    case JSON_STRING:
+    case JSON_UNPARSED:
+      return _content.asString ? parse<JsonFloat>(_content.asString) : 0;
+    default:
+      return _content.asFloat;
+  }
+}
+
+inline bool JsonVariant::isBoolean() const {
+  using namespace Internals;
+  if (_type == JSON_BOOLEAN) return true;
+
+  if (_type != JSON_UNPARSED || _content.asString == NULL) return false;
+
+  return !strcmp(_content.asString, "true") ||
+         !strcmp(_content.asString, "false");
+}
+
+inline bool JsonVariant::isInteger() const {
+  using namespace Internals;
+  if (_type == JSON_POSITIVE_INTEGER || _type == JSON_NEGATIVE_INTEGER)
+    return true;
+
+  if (_type != JSON_UNPARSED || _content.asString == NULL) return false;
+
+  char *end;
+  errno = 0;
+  strtol(_content.asString, &end, 10);
+
+  return *end == '\0' && errno == 0;
+}
+
+inline bool JsonVariant::isFloat() const {
+  using namespace Internals;
+  if (_type >= JSON_FLOAT_0_DECIMALS) return true;
+
+  if (_type != JSON_UNPARSED || _content.asString == NULL) return false;
+
+  char *end;
+  errno = 0;
+  strtod(_content.asString, &end);
+
+  return *end == '\0' && errno == 0 && !is<long>();
+}
+
+#if ARDUINOJSON_ENABLE_STD_STREAM
+inline std::ostream &operator<<(std::ostream &os, const JsonVariant &source) {
+  return source.printTo(os);
+}
+#endif
+
+}  // namespace ArduinoJson
@@ -0,0 +1,22 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#ifdef _MSC_VER
+#define FORCE_INLINE __forceinline
+#define NO_INLINE __declspec(noinline)
+#define DEPRECATED(msg) __declspec(deprecated(msg))
+#else
+#define FORCE_INLINE __attribute__((always_inline))
+#define NO_INLINE __attribute__((noinline))
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+#define DEPRECATED(msg) __attribute__((deprecated(msg)))
+#else
+#define DEPRECATED(msg) __attribute__((deprecated))
+#endif
+#endif
@@ -0,0 +1,111 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+// If Visual Studo <= 2012
+#if defined(_MSC_VER) && _MSC_VER <= 1700
+
+#include <float.h>
+
+namespace ArduinoJson {
+namespace Polyfills {
+template <typename T>
+bool isNaN(T x) {
+  return _isnan(x) != 0;
+}
+
+template <typename T>
+bool isInfinity(T x) {
+  return !_finite(x);
+}
+}
+}
+
+#else
+
+#include <math.h>
+
+// GCC warning: "conversion to 'float' from 'double' may alter its value"
+#ifdef __GNUC__
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#pragma GCC diagnostic push
+#endif
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 9)
+#pragma GCC diagnostic ignored "-Wfloat-conversion"
+#else
+#pragma GCC diagnostic ignored "-Wconversion"
+#endif
+#endif
+
+// Workaround for libs that #undef isnan or isinf
+// https://github.com/bblanchon/ArduinoJson/issues/284
+#if !defined(isnan) || !defined(isinf)
+namespace std {}
+#endif
+
+namespace ArduinoJson {
+namespace Polyfills {
+
+template <typename T>
+bool isNaN(T x) {
+// Workaround for libs that #undef isnan
+// https://github.com/bblanchon/ArduinoJson/issues/284
+#ifndef isnan
+  using namespace std;
+#endif
+
+  return isnan(x);
+}
+
+#if defined(_GLIBCXX_HAVE_ISNANL) && _GLIBCXX_HAVE_ISNANL
+template <>
+inline bool isNaN<double>(double x) {
+  return isnanl(x);
+}
+#endif
+
+#if defined(_GLIBCXX_HAVE_ISNANF) && _GLIBCXX_HAVE_ISNANF
+template <>
+inline bool isNaN<float>(float x) {
+  return isnanf(x);
+}
+#endif
+
+template <typename T>
+bool isInfinity(T x) {
+// Workaround for libs that #undef isinf
+// https://github.com/bblanchon/ArduinoJson/issues/284
+#ifndef isinf
+  using namespace std;
+#endif
+
+  return isinf(x);
+}
+
+#if defined(_GLIBCXX_HAVE_ISINFL) && _GLIBCXX_HAVE_ISINFL
+template <>
+inline bool isInfinity<double>(double x) {
+  return isinfl(x);
+}
+#endif
+
+#if defined(_GLIBCXX_HAVE_ISINFF) && _GLIBCXX_HAVE_ISINFF
+template <>
+inline bool isInfinity<float>(float x) {
+  return isinff(x);
+}
+#endif
+
+#if defined(__GNUC__)
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#pragma GCC diagnostic pop
+#endif
+#endif
+}
+}
+#endif
@@ -0,0 +1,47 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+namespace Polyfills {
+
+#ifdef ARDUINO
+
+// on embedded platform, favor code size over speed
+
+template <typename T>
+short normalize(T& value) {
+  short powersOf10 = 0;
+  while (value && value < 1) {
+    powersOf10--;
+    value *= 10;
+  }
+  while (value > 10) {
+    powersOf10++;
+    value /= 10;
+  }
+  return powersOf10;
+}
+
+#else
+
+// on non-embedded platform, favor speed over code size
+
+template <typename T>
+short normalize(T& value) {
+  if (value == 0.0) return 0;
+
+  short powersOf10 = static_cast<short>(floor(log10(value)));
+  value /= pow(T(10), powersOf10);
+
+  return powersOf10;
+}
+
+#endif
+}
+}
@@ -0,0 +1,44 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#ifndef ARDUINO
+
+#include <stddef.h>
+#include <stdint.h>
+
+namespace ArduinoJson {
+// This class reproduces Arduino's Print class
+class Print {
+ public:
+  virtual ~Print() {}
+
+  virtual size_t write(uint8_t) = 0;
+
+  size_t print(const char* s) {
+    size_t n = 0;
+    while (*s) {
+      n += write(static_cast<uint8_t>(*s++));
+    }
+    return n;
+  }
+
+  size_t println() {
+    size_t n = 0;
+    n += write('\r');
+    n += write('\n');
+    return n;
+  }
+};
+}
+
+#else
+
+#include <Print.h>
+
+#endif
@@ -0,0 +1,23 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+
+// A special type of data that can be used to insert pregenerated JSON portions.
+class RawJson {
+ public:
+  explicit RawJson(const char* str) : _str(str) {}
+  operator const char*() const {
+    return _str;
+  }
+
+ private:
+  const char* _str;
+};
+}
@@ -0,0 +1,23 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../Print.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+// A dummy Print implementation used in JsonPrintable::measureLength()
+class DummyPrint : public Print {
+ public:
+  virtual size_t write(uint8_t) {
+    return 1;
+  }
+};
+}
+}
@@ -0,0 +1,33 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../Print.hpp"
+#include "../StringTraits/StringTraits.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+// A Print implementation that allows to write in a String
+template <typename TString>
+class DynamicStringBuilder : public Print {
+ public:
+  DynamicStringBuilder(TString &str) : _str(str) {}
+
+  virtual size_t write(uint8_t c) {
+    StringTraits<TString>::append(_str, static_cast<char>(c));
+    return 1;
+  }
+
+ private:
+  DynamicStringBuilder &operator=(const DynamicStringBuilder &);
+
+  TString &_str;
+};
+}
+}
@@ -0,0 +1,65 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../Print.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+// Decorator on top of Print to allow indented output.
+// This class is used by JsonPrintable::prettyPrintTo() but can also be used
+// for your own purpose, like logging.
+class IndentedPrint : public Print {
+ public:
+  explicit IndentedPrint(Print &p) : sink(&p) {
+    level = 0;
+    tabSize = 2;
+    isNewLine = true;
+  }
+
+  virtual size_t write(uint8_t c) {
+    size_t n = 0;
+    if (isNewLine) n += writeTabs();
+    n += sink->write(c);
+    isNewLine = c == '\n';
+    return n;
+  }
+
+  // Adds one level of indentation
+  void indent() {
+    if (level < MAX_LEVEL) level++;
+  }
+
+  // Removes one level of indentation
+  void unindent() {
+    if (level > 0) level--;
+  }
+
+  // Set the number of space printed for each level of indentation
+  void setTabSize(uint8_t n) {
+    if (n < MAX_TAB_SIZE) tabSize = n & MAX_TAB_SIZE;
+  }
+
+ private:
+  Print *sink;
+  uint8_t level : 4;
+  uint8_t tabSize : 3;
+  bool isNewLine : 1;
+
+  size_t writeTabs() {
+    size_t n = 0;
+    for (int i = 0; i < level * tabSize; i++) n += sink->write(' ');
+    return n;
+  }
+
+  static const int MAX_LEVEL = 15;    // because it's only 4 bits
+  static const int MAX_TAB_SIZE = 7;  // because it's only 3 bits
+};
+}
+}
@@ -0,0 +1,115 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../Configuration.hpp"
+#include "../TypeTraits/EnableIf.hpp"
+#include "DummyPrint.hpp"
+#include "DynamicStringBuilder.hpp"
+#include "IndentedPrint.hpp"
+#include "JsonSerializer.hpp"
+#include "JsonWriter.hpp"
+#include "Prettyfier.hpp"
+#include "StaticStringBuilder.hpp"
+
+#if ARDUINOJSON_ENABLE_STD_STREAM
+#include "StreamPrintAdapter.hpp"
+#endif
+
+namespace ArduinoJson {
+namespace Internals {
+
+// Implements all the overloads of printTo() and prettyPrintTo()
+// Caution: this class use a template parameter to avoid virtual methods.
+// This is a bit curious but allows to reduce the size of JsonVariant, JsonArray
+// and JsonObject.
+template <typename T>
+class JsonPrintable {
+ public:
+  size_t printTo(Print &print) const {
+    JsonWriter writer(print);
+    JsonSerializer::serialize(downcast(), writer);
+    return writer.bytesWritten();
+  }
+
+#if ARDUINOJSON_ENABLE_STD_STREAM
+  std::ostream &printTo(std::ostream &os) const {
+    StreamPrintAdapter adapter(os);
+    printTo(adapter);
+    return os;
+  }
+#endif
+
+  size_t printTo(char *buffer, size_t bufferSize) const {
+    StaticStringBuilder sb(buffer, bufferSize);
+    return printTo(sb);
+  }
+
+  template <size_t N>
+  size_t printTo(char (&buffer)[N]) const {
+    return printTo(buffer, N);
+  }
+
+  template <typename TString>
+  typename TypeTraits::EnableIf<StringTraits<TString>::has_append, size_t>::type
+  printTo(TString &str) const {
+    DynamicStringBuilder<TString> sb(str);
+    return printTo(sb);
+  }
+
+  size_t prettyPrintTo(IndentedPrint &print) const {
+    Prettyfier p(print);
+    return printTo(p);
+  }
+
+  size_t prettyPrintTo(char *buffer, size_t bufferSize) const {
+    StaticStringBuilder sb(buffer, bufferSize);
+    return prettyPrintTo(sb);
+  }
+
+  template <size_t N>
+  size_t prettyPrintTo(char (&buffer)[N]) const {
+    return prettyPrintTo(buffer, N);
+  }
+
+  size_t prettyPrintTo(Print &print) const {
+    IndentedPrint indentedPrint = IndentedPrint(print);
+    return prettyPrintTo(indentedPrint);
+  }
+
+  template <typename TString>
+  typename TypeTraits::EnableIf<StringTraits<TString>::has_append, size_t>::type
+  prettyPrintTo(TString &str) const {
+    DynamicStringBuilder<TString> sb(str);
+    return prettyPrintTo(sb);
+  }
+
+  size_t measureLength() const {
+    DummyPrint dp;
+    return printTo(dp);
+  }
+
+  size_t measurePrettyLength() const {
+    DummyPrint dp;
+    return prettyPrintTo(dp);
+  }
+
+ private:
+  const T &downcast() const {
+    return *static_cast<const T *>(this);
+  }
+};
+
+#if ARDUINOJSON_ENABLE_STD_STREAM
+template <typename T>
+inline std::ostream &operator<<(std::ostream &os, const JsonPrintable<T> &v) {
+  return v.printTo(os);
+}
+#endif
+}
+}
@@ -0,0 +1,33 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "JsonWriter.hpp"
+
+namespace ArduinoJson {
+
+class JsonArray;
+class JsonArraySubscript;
+class JsonObject;
+template <typename TKey>
+class JsonObjectSubscript;
+class JsonVariant;
+
+namespace Internals {
+
+class JsonSerializer {
+ public:
+  static void serialize(const JsonArray &, JsonWriter &);
+  static void serialize(const JsonArraySubscript &, JsonWriter &);
+  static void serialize(const JsonObject &, JsonWriter &);
+  template <typename TKey>
+  static void serialize(const JsonObjectSubscript<TKey> &, JsonWriter &);
+  static void serialize(const JsonVariant &, JsonWriter &);
+};
+}
+}
@@ -0,0 +1,101 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../JsonArray.hpp"
+#include "../JsonArraySubscript.hpp"
+#include "../JsonObject.hpp"
+#include "../JsonObjectSubscript.hpp"
+#include "../JsonVariant.hpp"
+#include "JsonSerializer.hpp"
+
+inline void ArduinoJson::Internals::JsonSerializer::serialize(
+    const JsonArray& array, JsonWriter& writer) {
+  writer.beginArray();
+
+  JsonArray::const_iterator it = array.begin();
+  while (it != array.end()) {
+    serialize(*it, writer);
+
+    ++it;
+    if (it == array.end()) break;
+
+    writer.writeComma();
+  }
+
+  writer.endArray();
+}
+
+inline void ArduinoJson::Internals::JsonSerializer::serialize(
+    const JsonArraySubscript& arraySubscript, JsonWriter& writer) {
+  serialize(arraySubscript.as<JsonVariant>(), writer);
+}
+
+inline void ArduinoJson::Internals::JsonSerializer::serialize(
+    const JsonObject& object, JsonWriter& writer) {
+  writer.beginObject();
+
+  JsonObject::const_iterator it = object.begin();
+  while (it != object.end()) {
+    writer.writeString(it->key);
+    writer.writeColon();
+    serialize(it->value, writer);
+
+    ++it;
+    if (it == object.end()) break;
+
+    writer.writeComma();
+  }
+
+  writer.endObject();
+}
+
+template <typename TKey>
+inline void ArduinoJson::Internals::JsonSerializer::serialize(
+    const JsonObjectSubscript<TKey>& objectSubscript, JsonWriter& writer) {
+  serialize(objectSubscript.template as<JsonVariant>(), writer);
+}
+
+inline void ArduinoJson::Internals::JsonSerializer::serialize(
+    const JsonVariant& variant, JsonWriter& writer) {
+  switch (variant._type) {
+    case JSON_UNDEFINED:
+      return;
+
+    case JSON_ARRAY:
+      serialize(*variant._content.asArray, writer);
+      return;
+
+    case JSON_OBJECT:
+      serialize(*variant._content.asObject, writer);
+      return;
+
+    case JSON_STRING:
+      writer.writeString(variant._content.asString);
+      return;
+
+    case JSON_UNPARSED:
+      writer.writeRaw(variant._content.asString);
+      return;
+
+    case JSON_NEGATIVE_INTEGER:
+      writer.writeRaw('-');
+    case JSON_POSITIVE_INTEGER:
+      writer.writeInteger(variant._content.asInteger);
+      return;
+
+    case JSON_BOOLEAN:
+      writer.writeBoolean(variant._content.asInteger != 0);
+      return;
+
+    default:
+      uint8_t decimals =
+          static_cast<uint8_t>(variant._type - JSON_FLOAT_0_DECIMALS);
+      writer.writeFloat(variant._content.asFloat, decimals);
+  }
+}
@@ -0,0 +1,184 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../Data/Encoding.hpp"
+#include "../Data/JsonFloat.hpp"
+#include "../Data/JsonInteger.hpp"
+#include "../Polyfills/attributes.hpp"
+#include "../Polyfills/math.hpp"
+#include "../Polyfills/normalize.hpp"
+#include "../Print.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+// Writes the JSON tokens to a Print implementation
+// This class is used by:
+// - JsonArray::writeTo()
+// - JsonObject::writeTo()
+// - JsonVariant::writeTo()
+// Its derived by PrettyJsonWriter that overrides some members to add
+// indentation.
+class JsonWriter {
+ public:
+  explicit JsonWriter(Print &sink) : _sink(sink), _length(0) {}
+
+  // Returns the number of bytes sent to the Print implementation.
+  // This is very handy for implementations of printTo() that must return the
+  // number of bytes written.
+  size_t bytesWritten() const {
+    return _length;
+  }
+
+  void beginArray() {
+    writeRaw('[');
+  }
+  void endArray() {
+    writeRaw(']');
+  }
+
+  void beginObject() {
+    writeRaw('{');
+  }
+  void endObject() {
+    writeRaw('}');
+  }
+
+  void writeColon() {
+    writeRaw(':');
+  }
+  void writeComma() {
+    writeRaw(',');
+  }
+
+  void writeBoolean(bool value) {
+    writeRaw(value ? "true" : "false");
+  }
+
+  void writeString(const char *value) {
+    if (!value) {
+      writeRaw("null");
+    } else {
+      writeRaw('\"');
+      while (*value) writeChar(*value++);
+      writeRaw('\"');
+    }
+  }
+
+  void writeChar(char c) {
+    char specialChar = Encoding::escapeChar(c);
+    if (specialChar) {
+      writeRaw('\\');
+      writeRaw(specialChar);
+    } else {
+      writeRaw(c);
+    }
+  }
+
+  void writeFloat(JsonFloat value, uint8_t digits = 2) {
+    if (Polyfills::isNaN(value)) return writeRaw("NaN");
+
+    if (value < 0.0) {
+      writeRaw('-');
+      value = -value;
+    }
+
+    if (Polyfills::isInfinity(value)) return writeRaw("Infinity");
+
+    short powersOf10;
+    if (value > 1000 || value < 0.001) {
+      powersOf10 = Polyfills::normalize(value);
+    } else {
+      powersOf10 = 0;
+    }
+
+    // Round up last digit (so that print(1.999, 2) prints as "2.00")
+    value += getRoundingBias(digits);
+
+    // Extract the integer part of the value and print it
+    JsonUInt int_part = static_cast<JsonUInt>(value);
+    JsonFloat remainder = value - static_cast<JsonFloat>(int_part);
+    writeInteger(int_part);
+
+    // Print the decimal point, but only if there are digits beyond
+    if (digits > 0) {
+      writeRaw('.');
+    }
+
+    // Extract digits from the remainder one at a time
+    while (digits-- > 0) {
+      // Extract digit
+      remainder *= 10.0;
+      char currentDigit = char(remainder);
+      remainder -= static_cast<JsonFloat>(currentDigit);
+
+      // Print
+      writeRaw(char('0' + currentDigit));
+    }
+
+    if (powersOf10 < 0) {
+      writeRaw("e-");
+      writeInteger(-powersOf10);
+    }
+
+    if (powersOf10 > 0) {
+      writeRaw('e');
+      writeInteger(powersOf10);
+    }
+  }
+
+  void writeInteger(JsonUInt value) {
+    char buffer[22];
+    char *ptr = buffer + sizeof(buffer) - 1;
+
+    *ptr = 0;
+    do {
+      *--ptr = static_cast<char>(value % 10 + '0');
+      value /= 10;
+    } while (value);
+
+    writeRaw(ptr);
+  }
+
+  void writeRaw(const char *s) {
+    _length += _sink.print(s);
+  }
+  void writeRaw(char c) {
+    _length += _sink.write(c);
+  }
+
+ protected:
+  Print &_sink;
+  size_t _length;
+
+ private:
+  JsonWriter &operator=(const JsonWriter &);  // cannot be assigned
+
+  static JsonFloat getLastDigit(uint8_t digits) {
+    // Designed as a compromise between code size and speed
+    switch (digits) {
+      case 0:
+        return 1e-0;
+      case 1:
+        return 1e-1;
+      case 2:
+        return 1e-2;
+      case 3:
+        return 1e-3;
+      default:
+        return getLastDigit(uint8_t(digits - 4)) * 1e-4;
+    }
+  }
+
+  FORCE_INLINE static JsonFloat getRoundingBias(uint8_t digits) {
+    return 0.5 * getLastDigit(digits);
+  }
+};
+}
+}
@@ -0,0 +1,130 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "IndentedPrint.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+// Converts a compact JSON string into an indented one.
+class Prettyfier : public Print {
+ public:
+  explicit Prettyfier(IndentedPrint& p) : _sink(p) {
+    _previousChar = 0;
+    _inString = false;
+  }
+
+  virtual size_t write(uint8_t c) {
+    size_t n = _inString ? handleStringChar(c) : handleMarkupChar(c);
+    _previousChar = c;
+    return n;
+  }
+
+ private:
+  Prettyfier& operator=(const Prettyfier&);  // cannot be assigned
+
+  bool inEmptyBlock() {
+    return _previousChar == '{' || _previousChar == '[';
+  }
+
+  size_t handleStringChar(uint8_t c) {
+    bool isQuote = c == '"' && _previousChar != '\\';
+
+    if (isQuote) _inString = false;
+
+    return _sink.write(c);
+  }
+
+  size_t handleMarkupChar(uint8_t c) {
+    switch (c) {
+      case '{':
+      case '[':
+        return writeBlockOpen(c);
+
+      case '}':
+      case ']':
+        return writeBlockClose(c);
+
+      case ':':
+        return writeColon();
+
+      case ',':
+        return writeComma();
+
+      case '"':
+        return writeQuoteOpen();
+
+      default:
+        return writeNormalChar(c);
+    }
+  }
+
+  size_t writeBlockClose(uint8_t c) {
+    size_t n = 0;
+    n += unindentIfNeeded();
+    n += _sink.write(c);
+    return n;
+  }
+
+  size_t writeBlockOpen(uint8_t c) {
+    size_t n = 0;
+    n += indentIfNeeded();
+    n += _sink.write(c);
+    return n;
+  }
+
+  size_t writeColon() {
+    size_t n = 0;
+    n += _sink.write(':');
+    n += _sink.write(' ');
+    return n;
+  }
+
+  size_t writeComma() {
+    size_t n = 0;
+    n += _sink.write(',');
+    n += _sink.println();
+    return n;
+  }
+
+  size_t writeQuoteOpen() {
+    _inString = true;
+    size_t n = 0;
+    n += indentIfNeeded();
+    n += _sink.write('"');
+    return n;
+  }
+
+  size_t writeNormalChar(uint8_t c) {
+    size_t n = 0;
+    n += indentIfNeeded();
+    n += _sink.write(c);
+    return n;
+  }
+
+  size_t indentIfNeeded() {
+    if (!inEmptyBlock()) return 0;
+
+    _sink.indent();
+    return _sink.println();
+  }
+
+  size_t unindentIfNeeded() {
+    if (inEmptyBlock()) return 0;
+
+    _sink.unindent();
+    return _sink.println();
+  }
+
+  uint8_t _previousChar;
+  IndentedPrint& _sink;
+  bool _inString;
+};
+}
+}
@@ -0,0 +1,37 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../Print.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+// A Print implementation that allows to write in a char[]
+class StaticStringBuilder : public Print {
+ public:
+  StaticStringBuilder(char *buf, size_t size)
+      : buffer(buf), capacity(size - 1), length(0) {
+    buffer[0] = '\0';
+  }
+
+  virtual size_t write(uint8_t c) {
+    if (length >= capacity) return 0;
+
+    buffer[length++] = c;
+    buffer[length] = '\0';
+    return 1;
+  }
+
+ private:
+  char *buffer;
+  size_t capacity;
+  size_t length;
+};
+}
+}
@@ -0,0 +1,39 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../Configuration.hpp"
+
+#if ARDUINOJSON_ENABLE_STD_STREAM
+
+#include "../Print.hpp"
+
+#include <ostream>
+
+namespace ArduinoJson {
+namespace Internals {
+
+class StreamPrintAdapter : public Print {
+ public:
+  explicit StreamPrintAdapter(std::ostream& os) : _os(os) {}
+
+  virtual size_t write(uint8_t c) {
+    _os << static_cast<char>(c);
+    return 1;
+  }
+
+ private:
+  // cannot be assigned
+  StreamPrintAdapter& operator=(const StreamPrintAdapter&);
+
+  std::ostream& _os;
+};
+}
+}
+
+#endif  // ARDUINOJSON_ENABLE_STD_STREAM
@@ -0,0 +1,113 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "JsonBufferBase.hpp"
+
+#if defined(__clang__)
+#pragma clang diagnostic push
+#pragma clang diagnostic ignored "-Wnon-virtual-dtor"
+#elif defined(__GNUC__)
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#pragma GCC diagnostic push
+#endif
+#pragma GCC diagnostic ignored "-Wnon-virtual-dtor"
+#endif
+
+namespace ArduinoJson {
+
+class StaticJsonBufferBase : public JsonBufferBase<StaticJsonBufferBase> {
+ public:
+  class String {
+   public:
+    String(StaticJsonBufferBase* parent) : _parent(parent) {
+      _start = parent->_buffer + parent->_size;
+    }
+
+    void append(char c) {
+      if (_parent->canAlloc(1)) {
+        char* last = static_cast<char*>(_parent->doAlloc(1));
+        *last = c;
+      }
+    }
+
+    const char* c_str() const {
+      if (_parent->canAlloc(1)) {
+        char* last = static_cast<char*>(_parent->doAlloc(1));
+        *last = '\0';
+        return _start;
+      } else {
+        return NULL;
+      }
+    }
+
+   private:
+    StaticJsonBufferBase* _parent;
+    char* _start;
+  };
+
+  StaticJsonBufferBase(char* buffer, size_t capa)
+      : _buffer(buffer), _capacity(capa), _size(0) {}
+
+  size_t capacity() const {
+    return _capacity;
+  }
+  size_t size() const {
+    return _size;
+  }
+
+  virtual void* alloc(size_t bytes) {
+    alignNextAlloc();
+    if (!canAlloc(bytes)) return NULL;
+    return doAlloc(bytes);
+  }
+
+  String startString() {
+    return String(this);
+  }
+
+ private:
+  void alignNextAlloc() {
+    _size = round_size_up(_size);
+  }
+
+  bool canAlloc(size_t bytes) const {
+    return _size + bytes <= _capacity;
+  }
+
+  void* doAlloc(size_t bytes) {
+    void* p = &_buffer[_size];
+    _size += bytes;
+    return p;
+  }
+
+  char* _buffer;
+  size_t _capacity;
+  size_t _size;
+};
+
+// Implements a JsonBuffer with fixed memory allocation.
+// The template paramenter CAPACITY specifies the capacity of the buffer in
+// bytes.
+template <size_t CAPACITY>
+class StaticJsonBuffer : public StaticJsonBufferBase {
+ public:
+  explicit StaticJsonBuffer() : StaticJsonBufferBase(_buffer, CAPACITY) {}
+
+ private:
+  char _buffer[CAPACITY];
+};
+}
+
+#if defined(__clang__)
+#pragma clang diagnostic pop
+#elif defined(__GNUC__)
+#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#pragma GCC diagnostic pop
+#endif
+#endif
@@ -0,0 +1,61 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include <Stream.h>
+
+#include "../TypeTraits/EnableIf.hpp"
+#include "../TypeTraits/IsBaseOf.hpp"
+#include "../TypeTraits/RemoveReference.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+struct ArduinoStreamTraits {
+  class Reader {
+    Stream& _stream;
+    char _current, _next;
+
+   public:
+    Reader(Stream& stream) : _stream(stream), _current(0), _next(0) {}
+
+    void move() {
+      _current = _next;
+      _next = 0;
+    }
+
+    char current() {
+      if (!_current) _current = read();
+      return _current;
+    }
+
+    char next() {
+      // assumes that current() has been called
+      if (!_next) _next = read();
+      return _next;
+    }
+
+   private:
+    char read() {
+      // don't use _stream.read() as it ignores the timeout
+      char c = 0;
+      _stream.readBytes(&c, 1);
+      return c;
+    }
+  };
+};
+
+template <typename TStream>
+struct StringTraits<TStream,
+                    // match any type that is derived from Stream:
+                    typename TypeTraits::EnableIf<TypeTraits::IsBaseOf<
+                        Stream, typename TypeTraits::RemoveReference<
+                                    TStream>::type>::value>::type>
+    : ArduinoStreamTraits {};
+}
+}
@@ -0,0 +1,61 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../TypeTraits/EnableIf.hpp"
+#include "../TypeTraits/IsChar.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+template <typename TChar>
+struct CharPointerTraits {
+  class Reader {
+    const TChar* _ptr;
+
+   public:
+    Reader(const TChar* ptr)
+        : _ptr(ptr ? ptr : reinterpret_cast<const TChar*>("")) {}
+
+    void move() {
+      ++_ptr;
+    }
+
+    TChar current() const {
+      return _ptr[0];
+    }
+
+    TChar next() const {
+      return _ptr[1];
+    }
+  };
+
+  static bool equals(const TChar* str, const char* expected) {
+    return strcmp(reinterpret_cast<const char*>(str), expected) == 0;
+  }
+
+  template <typename Buffer>
+  static char* duplicate(const TChar* str, Buffer* buffer) {
+    if (!str) return NULL;
+    size_t size = strlen(reinterpret_cast<const char*>(str)) + 1;
+    void* dup = buffer->alloc(size);
+    if (dup != NULL) memcpy(dup, str, size);
+    return static_cast<char*>(dup);
+  }
+
+  static const bool has_append = false;
+  static const bool has_equals = true;
+  static const bool should_duplicate = false;
+};
+
+template <typename TChar>
+struct StringTraits<TChar*, typename TypeTraits::EnableIf<
+                                TypeTraits::IsChar<TChar>::value>::type>
+    : CharPointerTraits<TChar> {};
+}
+}
@@ -0,0 +1,52 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+namespace Internals {
+template <>
+struct StringTraits<const __FlashStringHelper*, void> {
+  class Reader {
+    const char* _ptr;
+
+   public:
+    Reader(const __FlashStringHelper* ptr)
+        : _ptr(reinterpret_cast<const char*>(ptr)) {}
+
+    void move() {
+      _ptr++;
+    }
+
+    char current() const {
+      return pgm_read_byte_near(_ptr);
+    }
+
+    char next() const {
+      return pgm_read_byte_near(_ptr + 1);
+    }
+  };
+
+  static bool equals(const __FlashStringHelper* str, const char* expected) {
+    return strcmp_P(expected, (PGM_P)str) == 0;
+  }
+
+  template <typename Buffer>
+  static char* duplicate(const __FlashStringHelper* str, Buffer* buffer) {
+    if (!str) return NULL;
+    size_t size = strlen_P((PGM_P)str) + 1;
+    void* dup = buffer->alloc(size);
+    if (dup != NULL) memcpy_P(dup, (PGM_P)str, size);
+    return static_cast<char*>(dup);
+  }
+
+  static const bool has_append = false;
+  static const bool has_equals = true;
+  static const bool should_duplicate = true;
+};
+}
+}
@@ -0,0 +1,59 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include <istream>
+#include "../TypeTraits/EnableIf.hpp"
+#include "../TypeTraits/IsBaseOf.hpp"
+#include "../TypeTraits/RemoveReference.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+struct StdStreamTraits {
+  class Reader {
+    std::istream& _stream;
+    char _current, _next;
+
+   public:
+    Reader(std::istream& stream) : _stream(stream), _current(0), _next(0) {}
+
+    void move() {
+      _current = _next;
+      _next = 0;
+    }
+
+    char current() {
+      if (!_current) _current = read();
+      return _current;
+    }
+
+    char next() {
+      // assumes that current() has been called
+      if (!_next) _next = read();
+      return _next;
+    }
+
+   private:
+    Reader& operator=(const Reader&);  // Visual Studio C4512
+
+    char read() {
+      return _stream.eof() ? '\0' : static_cast<char>(_stream.get());
+    }
+  };
+};
+
+template <typename TStream>
+struct StringTraits<TStream,
+                    // match any type that is derived from std::istream:
+                    typename TypeTraits::EnableIf<TypeTraits::IsBaseOf<
+                        std::istream, typename TypeTraits::RemoveReference<
+                                          TStream>::type>::value>::type>
+    : StdStreamTraits {};
+}
+}
@@ -0,0 +1,62 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#if ARDUINOJSON_ENABLE_ARDUINO_STRING
+#include <WString.h>
+#endif
+
+#if ARDUINOJSON_ENABLE_STD_STRING
+#include <string>
+#endif
+
+namespace ArduinoJson {
+namespace Internals {
+
+template <typename TString>
+struct StdStringTraits {
+  template <typename Buffer>
+  static char* duplicate(const TString& str, Buffer* buffer) {
+    if (!str.c_str()) return NULL;  // <- Arduino string can return NULL
+    size_t size = str.length() + 1;
+    void* dup = buffer->alloc(size);
+    if (dup != NULL) memcpy(dup, str.c_str(), size);
+    return static_cast<char*>(dup);
+  }
+
+  struct Reader : CharPointerTraits<char>::Reader {
+    Reader(const TString& str) : CharPointerTraits<char>::Reader(str.c_str()) {}
+  };
+
+  static bool equals(const TString& str, const char* expected) {
+    return 0 == strcmp(str.c_str(), expected);
+  }
+
+  static void append(TString& str, char c) {
+    str += c;
+  }
+
+  static const bool has_append = true;
+  static const bool has_equals = true;
+  static const bool should_duplicate = true;
+};
+
+#if ARDUINOJSON_ENABLE_ARDUINO_STRING
+template <>
+struct StringTraits<String, void> : StdStringTraits<String> {};
+template <>
+struct StringTraits<StringSumHelper, void> : StdStringTraits<StringSumHelper> {
+};
+#endif
+
+#if ARDUINOJSON_ENABLE_STD_STRING
+template <>
+struct StringTraits<std::string, void> : StdStringTraits<std::string> {};
+#endif
+}
+}
@@ -0,0 +1,57 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../Configuration.hpp"
+
+namespace ArduinoJson {
+namespace Internals {
+
+template <typename TString, typename Enable = void>
+struct StringTraits {};
+
+template <typename TString>
+struct StringTraits<const TString, void> : StringTraits<TString> {};
+
+template <typename TString>
+struct StringTraits<TString&, void> : StringTraits<TString> {};
+}
+}
+
+#include "CharPointer.hpp"
+
+#if ARDUINOJSON_ENABLE_STD_STRING || ARDUINOJSON_ENABLE_ARDUINO_STRING
+#include "StdString.hpp"
+#endif
+
+#if ARDUINOJSON_ENABLE_STD_STREAM
+#include "StdStream.hpp"
+#endif
+
+#if ARDUINOJSON_ENABLE_ARDUINO_STREAM
+#include "ArduinoStream.hpp"
+#endif
+
+#if ARDUINOJSON_ENABLE_PROGMEM
+#include "FlashString.hpp"
+#endif
+
+namespace ArduinoJson {
+namespace TypeTraits {
+template <typename T, typename Enable = void>
+struct IsString {
+  static const bool value = false;
+};
+
+template <typename T>
+struct IsString<T, typename TypeTraits::EnableIf<
+                       Internals::StringTraits<T>::has_equals>::type> {
+  static const bool value = Internals::StringTraits<T>::has_equals;
+};
+}
+}
@@ -0,0 +1,22 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+namespace TypeTraits {
+
+// A meta-function that return the type T if Condition is true.
+template <bool Condition, typename T = void>
+struct EnableIf {};
+
+template <typename T>
+struct EnableIf<true, T> {
+  typedef T type;
+};
+}
+}
@@ -0,0 +1,27 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+namespace TypeTraits {
+
+// A meta-function that return the type T without the const modifier
+template <typename T>
+struct IsArray {
+  static const bool value = false;
+};
+template <typename T>
+struct IsArray<T[]> {
+  static const bool value = true;
+};
+template <typename T, size_t N>
+struct IsArray<T[N]> {
+  static const bool value = true;
+};
+}
+}
@@ -0,0 +1,30 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+namespace TypeTraits {
+
+// A meta-function that returns true if Derived inherits from TBase is an
+// integral type.
+template <typename TBase, typename TDerived>
+class IsBaseOf {
+ protected:  // <- to avoid GCC's "all member functions in class are private"
+  typedef char Yes[1];
+  typedef char No[2];
+
+  static Yes &probe(const TBase *);
+  static No &probe(...);
+
+ public:
+  enum {
+    value = sizeof(probe(reinterpret_cast<TDerived *>(0))) == sizeof(Yes)
+  };
+};
+}
+}
@@ -0,0 +1,26 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "IsSame.hpp"
+
+namespace ArduinoJson {
+namespace TypeTraits {
+
+// A meta-function that returns true if T is a charater
+template <typename T>
+struct IsChar {
+  static const bool value = IsSame<T, char>::value ||
+                            IsSame<T, signed char>::value ||
+                            IsSame<T, unsigned char>::value;
+};
+
+template <typename T>
+struct IsChar<const T> : IsChar<T> {};
+}
+}
@@ -0,0 +1,24 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+namespace TypeTraits {
+
+// A meta-function that return the type T without the const modifier
+template <typename T>
+struct IsConst {
+  static const bool value = false;
+};
+
+template <typename T>
+struct IsConst<const T> {
+  static const bool value = true;
+};
+}
+}
@@ -0,0 +1,21 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "IsSame.hpp"
+
+namespace ArduinoJson {
+namespace TypeTraits {
+
+// A meta-function that returns true if T is a floating point type
+template <typename T>
+struct IsFloatingPoint {
+  static const bool value = IsSame<T, float>::value || IsSame<T, double>::value;
+};
+}
+}
@@ -0,0 +1,29 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "IsSame.hpp"
+#include "IsSignedIntegral.hpp"
+#include "IsUnsignedIntegral.hpp"
+
+namespace ArduinoJson {
+namespace TypeTraits {
+
+// A meta-function that returns true if T is an integral type.
+template <typename T>
+struct IsIntegral {
+  static const bool value = TypeTraits::IsSignedIntegral<T>::value ||
+                            TypeTraits::IsUnsignedIntegral<T>::value ||
+                            TypeTraits::IsSame<T, char>::value ||
+                            TypeTraits::IsSame<T, bool>::value;
+};
+
+template <typename T>
+struct IsIntegral<const T> : IsIntegral<T> {};
+}
+}
@@ -0,0 +1,24 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+namespace TypeTraits {
+
+// A meta-function that returns true if types T and U are the same.
+template <typename T, typename U>
+struct IsSame {
+  static const bool value = false;
+};
+
+template <typename T>
+struct IsSame<T, T> {
+  static const bool value = true;
+};
+}
+}
@@ -0,0 +1,33 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../Configuration.hpp"
+#include "IsSame.hpp"
+
+namespace ArduinoJson {
+namespace TypeTraits {
+
+// A meta-function that returns true if T is an integral type.
+template <typename T>
+struct IsSignedIntegral {
+  static const bool value = TypeTraits::IsSame<T, signed char>::value ||
+                            TypeTraits::IsSame<T, signed short>::value ||
+                            TypeTraits::IsSame<T, signed int>::value ||
+                            TypeTraits::IsSame<T, signed long>::value ||
+#if ARDUINOJSON_USE_LONG_LONG
+                            TypeTraits::IsSame<T, signed long long>::value ||
+#endif
+
+#if ARDUINOJSON_USE_INT64
+                            TypeTraits::IsSame<T, signed __int64>::value ||
+#endif
+                            false;
+};
+}
+}
@@ -0,0 +1,33 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+#include "../Configuration.hpp"
+#include "IsSame.hpp"
+
+namespace ArduinoJson {
+namespace TypeTraits {
+
+// A meta-function that returns true if T is an integral type.
+template <typename T>
+struct IsUnsignedIntegral {
+  static const bool value = TypeTraits::IsSame<T, unsigned char>::value ||
+                            TypeTraits::IsSame<T, unsigned short>::value ||
+                            TypeTraits::IsSame<T, unsigned int>::value ||
+                            TypeTraits::IsSame<T, unsigned long>::value ||
+#if ARDUINOJSON_USE_LONG_LONG
+                            TypeTraits::IsSame<T, unsigned long long>::value ||
+#endif
+
+#if ARDUINOJSON_USE_INT64
+                            TypeTraits::IsSame<T, unsigned __int64>::value ||
+#endif
+                            false;
+};
+}
+}
@@ -0,0 +1,23 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+namespace TypeTraits {
+
+// A meta-function that return the type T without the const modifier
+template <typename T>
+struct RemoveConst {
+  typedef T type;
+};
+template <typename T>
+struct RemoveConst<const T> {
+  typedef T type;
+};
+}
+}
@@ -0,0 +1,23 @@
+// Copyright Benoit Blanchon 2014-2017
+// MIT License
+//
+// Arduino JSON library
+// https://github.com/bblanchon/ArduinoJson
+// If you like this project, please add a star!
+
+#pragma once
+
+namespace ArduinoJson {
+namespace TypeTraits {
+
+// A meta-function that return the type T without the reference modifier.
+template <typename T>
+struct RemoveReference {
+  typedef T type;
+};
+template <typename T>
+struct RemoveReference<T&> {
+  typedef T type;
+};
+}
+}
@@ -0,0 +1,15 @@
+JsonArray	KEYWORD1
+JsonObject	KEYWORD1
+JsonVariant	KEYWORD1
+StaticJsonBuffer	KEYWORD1
+DynamicJsonBuffer	KEYWORD1
+add	KEYWORD2
+createArray	KEYWORD2
+createNestedArray	KEYWORD2
+createNestedObject	KEYWORD2
+createObject	KEYWORD2
+parseArray	KEYWORD2
+parseObject	KEYWORD2
+prettyPrintTo	KEYWORD2
+printTo	KEYWORD2
+success	KEYWORD2
@@ -0,0 +1,22 @@
+{
+  "name": "ArduinoJson",
+  "keywords": "json, rest, http, web",
+  "description": "An elegant and efficient JSON library for embedded systems",
+  "repository": {
+    "type": "git",
+    "url": "https://github.com/bblanchon/ArduinoJson.git"
+  },
+  "version": "5.8.3",
+  "authors": {
+    "name": "Benoit Blanchon",
+    "url": "https://blog.benoitblanchon.fr"
+  },
+  "exclude": [
+    "scripts",
+    "src/ArduinoJson.h",
+    "test",
+    "third-party"
+  ],
+  "frameworks": "arduino",
+  "platforms": "*"
+}
@@ -0,0 +1,9 @@
+name=ArduinoJson
+version=5.8.3
+author=Benoit Blanchon <blog.benoitblanchon.fr>
+maintainer=Benoit Blanchon <blog.benoitblanchon.fr>
+sentence=An efficient and elegant JSON library for Arduino.
+paragraph=Like this project? Please star it on GitHub!
+category=Data Processing
+url=https://github.com/bblanchon/ArduinoJson
+architectures=*
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
arendst	2b62f94871	v4.1.3 4.1.3 20170410 * Add user configuarble GPIO to module S20 Socket and Slampher * Add support for Sonoff SC (#112) * Set PWM frequency from 1000Hz to 910Hz as used on iTead Sonoff Led firmware (#122) * Set Sonoff Led unconfigured floating outputs to 0 to reduce exceptions due to power supply instabilities (#122) * Add Access Point Mac Address to Status 11 and Telemetry (#329) * Fix DS18B20 negative temperature readings (#334)	2017-04-10 17:34:52 +02:00
arendst	79b63858b9	v4.1.3 4.1.3 20170410 * Add user configuarble GPIO to module S20 Socket and Slampher * Add support for Sonoff SC (#112) * Set PWM frequency from 1000Hz to 910Hz as used on iTead Sonoff Led firmware (#122) * Set Sonoff Led unconfigured floating outputs to 0 to reduce exceptions due to power supply instabilities (#122) * Add Access Point Mac Address to Status 11 and Telemetry (#329) * Fix DS18B20 negative temperature readings (#334)	2017-04-10 17:33:57 +02:00
arendst	824368125b	v4.1.3 4.1.3 20170410 * Add user configuarble GPIO to module S20 Socket and Slampher * Add support for Sonoff SC (#112) * Set PWM frequency from 1000Hz to 910Hz as used on iTead Sonoff Led firmware (#122) * Set Sonoff Led unconfigured floating outputs to 0 to reduce exceptions due to power supply instabilities (#122) * Add Access Point Mac Address to Status 11 and Telemetry (#329) * Fix DS18B20 negative temperature readings (#334)	2017-04-10 17:25:31 +02:00
arendst	d32cb04b1a	v4.1.2 4.1.2 20170403 * Rename Unrecognised command to Unknown command * Remove all command lists * Remove command SmartConfig (superseded by WifiConfig) * Fix boot loop when selecting module Sonoff 4CH or Sonoff Touch on non ESP8285 hardware * Add optional support for Toshiba and Mitsubishi HVAC IR control (needs updated IRremote8266 library) (#83, #257) * Add all configured switches to Domoticz Configuration web page (#305) * Fix compile error when selecting WS2812 DMA (#313)	2017-04-03 16:51:07 +02:00
arendst	46dd474c6a	v4.1.2 4.1.2 20170403 * Rename Unrecognised command to Unknown command * Remove all command lists * Remove command SmartConfig (superseded by WifiConfig) * Fix boot loop when selecting module Sonoff 4CH or Sonoff Touch on non ESP8285 hardware * Add optional support for Toshiba and Mitsubishi HVAC IR control (needs updated IRanother (#83, #257) * Add all configured switches to Domoticz Configuration web page (#305) * Fix compile error when selecting WS2812 DMA (#313)	2017-04-03 16:40:13 +02:00
arendst	fcb380ce2c	v4.1.2 4.1.2 20170403 * Rename Unrecognised command to Unknown command * Remove all command lists * Remove command SmartConfig (superseded by WifiConfig) * Fix boot loop when selecting module Sonoff 4CH or Sonoff Touch on non ESP8285 hardware * Add optional support for Toshiba and Mitsubishi HVAC IR control (needs updated IRanother (#257) * Add all configured switches to Domoticz Configuration web page (#305) * Fix compile error when selecting WS2812 DMA (#313)	2017-04-03 16:38:15 +02:00
arendst	6824c8ac8a	Update library for HVAC	2017-04-03 15:07:49 +02:00
arendst	a8f2293a66	v4.1.1 4.1.1 20170329 * Fix default Telemetry for command Prefix3 * Fix webserver Module parameters for disabled select * Fix sensor status for enabled switches * Remove Light as alternative for Power (save code space) * Remove migration option from pre V3 (code cleanup) * Remove unofficial SPIFFS support (code cleanup) * Remove command list when unknown command is entered (save code space) * Rename Status11 json from StatusPWR to unique StatusSTS * Rename command Gateway to IPAddres2, Subnetmask to IPAddress3 and DnsServer to IPAddress4 (save code space) * Add Command MqttResponse to select either command or RESULT topic as response (#258) * Add command StateText1 to StateText3 to assign MQTT_STATUS_OFF, MQTT_STATUS_ON and MQTT_CMND_TOGGLE respectively (#286) * Remove restart after IPAddress changes (#292) * Add support for MAX31850 in xsns_ds18x20.ino (#295) * Fix possible uptime update misses (#302)	2017-03-29 18:42:05 +02:00
arendst	81eb44aa8c	Revert "Updated library" This reverts commit `659fa92610`.	2017-03-29 18:24:57 +02:00
arendst	659fa92610	Updated library	2017-03-29 18:14:16 +02:00
arendst	ae27ec26a4	v4.1.0 4.1.0 20170325 * Change static IP addresses in user_config.h from list (using commas) to string (using dots) * Unify display result of commands Modules, Module and Gpios * Rewrite Module selection web page to bring size down from 18651 to 4319 bytes (!) (#234, #240) * Add basic support for (Lixada) H801 RGBWW controller (#252) * Add command Prefix1 to Prefix3 to assign SUB_PREFIX, PUB_PREFIX and PUB_PREFIX2 respectively (#255) * Add static ip addresses to flash (#262) * Add commands IpAddress, Gateway, Subnetmask and DnsServer to select static ip addresses (#273)	2017-03-25 17:24:11 +01:00
arendst	99b7474ac4	v4.0.8 4.0.8 20170321 * Fix entering non-numeric webpassword * Force selection between TLS or Webserver due to memory restraint (#240) * Allow entering empty string using "0" for selected commands (#242) * Fix exception when posting commands to web console containing % (#250)	2017-03-21 16:17:28 +01:00
arendst	742a87df8a	v4.0.7 4.0.7 20170319 * Increased Sonoff Led PWM frequency from 432 to 1000 * Fix possible watch dog reboot after changing module type on web page * Fix reporting of GPIO usage from web page * Fix Sonoff Led blank during firmware upgrade * Fix Sonoff Led flicker and possible flash corruption by using latest Arduino-esp8266 versions * of pwm core files included in sonoff library (#211) * Add PWM output control with commands PWM1 to PWM5 using user selectable GPIOs (#211) * Fix exceptions due to low values of commands HlwPCal (10000), HlwUCal (1000) and HlwICal (2500) (#223) * Add Switch state to sensor status (#227, #233) * Add user configuarble GPIO to module Sonoff Touch (#228) * Add define WEB_PORT to user_config.h to change default web server port from 80 (#232) * Fix failed Ota Firmware upgrade started from Web page (#235)	2017-03-19 18:19:08 +01:00
arendst	c4cdd4459c	v4.0.6 4.0.6 20170316 * Fix to better find device by Wifi hostname * Fix compile error when some I2C devices are disabled * Add (experimental) support for SHT1X emulating I2C (#97) * Add ADC to ElectroDragon (#203) * Add support for Sonoff Dev (#206)	2017-03-16 16:23:11 +01:00
Theo ArendsandGitHub	7aebdbbacf	Update README.md	2017-03-15 12:46:46 +01:00
Theo ArendsandGitHub	7aa1df1da8	Update README.md	2017-03-15 12:17:11 +01:00
Theo ArendsandGitHub	06ba6b2b20	Update README.md	2017-03-15 12:15:28 +01:00
Theo ArendsandGitHub	d9c654a2b1	Update README.md	2017-03-15 12:14:04 +01:00
Theo ArendsandGitHub	a68d9aeb6d	Update README.md	2017-03-15 12:13:06 +01:00
Theo ArendsandGitHub	29ee113153	Update README.md	2017-03-14 23:06:15 +01:00
Theo ArendsandGitHub	919e861456	Update README.md	2017-03-14 23:05:21 +01:00
Theo ArendsandGitHub	9729a50098	Update README.md	2017-03-14 23:03:13 +01:00
Theo ArendsandGitHub	4952eeb71b	Update README.md	2017-03-14 23:02:16 +01:00
Theo ArendsandGitHub	97bc30a25b	Update README.md	2017-03-14 23:01:31 +01:00
Theo ArendsandGitHub	a566c3fc6c	Update README.md	2017-03-14 23:00:18 +01:00
Theo ArendsandGitHub	e7ab4b9702	Update README.md	2017-03-14 22:59:21 +01:00
Theo ArendsandGitHub	5d44b1dc31	Update README.md	2017-03-14 22:58:04 +01:00
Theo ArendsandGitHub	f9e8359756	update	2017-03-14 22:56:41 +01:00
Theo ArendsandGitHub	00036420c0	Update README.md	2017-03-14 22:54:08 +01:00
Theo ArendsandGitHub	eb98a653f5	Update README.md	2017-03-14 22:51:22 +01:00
arendst	67fe118dfe	v4.0.5 4.0.5 20170314 * Add command Status 11 to show power status with Vcc if define USE_ADC_VCC is enabled (default) * Add ADC input to Sonoff SV and Wemos D1 mini - Needs recompile with define USE_ADC_VCC disabled (#137) * Add MQTT host:port to timeout message (#199)	2017-03-14 18:03:25 +01:00
arendst	5e4157ebe4	Revert "v4.0.5" This reverts commit `18a1f5e5df`.	2017-03-14 15:40:24 +01:00
arendst	18a1f5e5df	v4.0.5 4.0.5 20170314 * Add command Status 11 to show power status with Vcc if define USE_ADC_VCC is enabled (default) * Add ADC input to Sonoff SV and Wemos D1 mini - Needs recompile with define USE_ADC_VCC disabled (#137) * Add MQTT host:port to timeout message (#199)	2017-03-14 12:36:06 +01:00
arendst	b85fef0479	v4.0.4 4.0.4 20170312 * Add pulse timers for up to 4 relays (#106) * Fix Sonoff Led power state when dimmer or color is 0 (#176) * Add command NtpServer<x> to configure up to three NTP servers (#177) * Delete module User Test as module Wemos D1 mini has same/more user configurable GPIO (#178) * Add more user configurable GPIO to module ElectroDragon (#183)	2017-03-12 18:36:33 +01:00
arendst	59bb20d2cb	v4.0.3 4.0.3 20170309 * Renamed Module NodeMCU to WeMos D1 mini * Add GPIO1 as user option to some modules * Add Buttons, Relays and Leds to user configurable options (#159) * Add description on Module parameters web page to some well known GPIOs (#107, #171)	2017-03-09 17:48:04 +01:00
arendst	7786889e90	Updated esp8266/esp8285 selection	2017-03-08 18:08:47 +01:00
arendst	ac84010015	v4.0.2 4.0.2 20170308 * Restore correct seriallog level after Serial logging was disabled * Add simple dimmer slider to Sonoff Led web page * Reduced root webpage size by 31% * Expand Status 2 with Build date/time and core version * Fix webserver redirection when not in WifiManager mode (#156) * Add command ButtonRestrict On/Off to restrict access to button hold and button multi press options above 2 (#161) * Fix DS18S20 negative temperature readings (#165) * Fix crlf compilation error due to bad syntax (#144, #167)	2017-03-08 16:20:45 +01:00
arendst	4797696b39	Add linefeed normalisation	2017-03-07 09:36:01 +01:00
arendst	47d711b1b2	v4.0.1 4.0.1 20170305 * Fix char default sizes and set MESSZ to 360 (#143) * Fix SerialLog setting status * Disable syslog when emulation is active * Add DS18B20 web page display refresh	2017-03-05 15:07:30 +01:00
arendst	acb5252b54	v4.0.0 4.0.0 20170303 * Add define to remove config migration code for versions below 3.0 (See Wiki-Upgrade-Migration path) * Free memory by switching from String to char[] * Raised Sonoff Led PWM frequency from 200Hz to 432Hz in search of stability (hardware watchdog timeouts) (#122) * Increase message size and suggested minimum MQTT_MAX_PACKET_SIZE to 512 (#114, #124) * Remove runtime warning message regarding MQTT_MAX_PACKET_SIZE too small as it is now moved to compile time (#124) * Fix possible panics with web console and http commands while UDP syslog is active (#127) * Add optional static IP address (#129) * Add define ENERGY_RESOLUTION in user_config.h to allow user control over precision (#136)	2017-03-03 12:35:23 +01:00
arendst	4a989fb8c6	Updated minimum MQTT_MAX_PACKET_SIZE to 512	2017-03-01 11:33:32 +01:00
arendst	fc3b7e22ab	v3.9.22 3.9.22 20170228 * Update web console * Fix Status 4 JSON message * Add Exception info during restart if available * Add osWatch service to detect loop hangs that might happen during (OTA) upgrades * Add WiOn support for relay and switch only (#82, #102) * Allow for user specified relay count up to four in sonoff_template.h (#109) * Add support for HTU21 compatible I2C sensors SI7013, SI7020 and SI7021 (#118) * Add NodeMCU or Wemos configuration option (#119)	2017-02-28 16:01:48 +01:00
arendst	3fefb9b931	v3.9.21 3.9.21 20170224 * Add ajax to web root page and web console (#79) * Add commands SwitchMode1..4 and enable user switches 2, 3 and 4 (#84, #88) * Fix MQTT upgrade when webserver is active	2017-02-24 18:17:48 +01:00
arendst	3f73e48bfa	v3.9.20 3.9.20 20170221 * Add minimal basic authentication to Web Admin mode (#87) * Fix Hue and add HSB support (#89)	2017-02-21 18:14:33 +01:00
arendst	aaabe37f15	Add correct libraries Arduino IDE: Place libraries in portable/sketchbook/libraries folder. PlatformIO: Place libraries in your projects lib folder.	2017-02-21 09:50:32 +01:00
arendst	18aaf05622	v3.9.19 3.9.19 20170219 * Sonoff Led: Made GPIO04, 05 and 15 available for user * Sonoff Led: Add commands Fade, Speed, WakupDuration, Wakeup and LedTable	2017-02-19 17:49:17 +01:00
arendst	3997f48809	v3.9.18 3.9.18 20170218 * Fix ledstate 0 to turn off led * Fix Sonoff Led dimmer range (#16) * Change Sonoff Led command Dimmer to act on both cold and warm color * Add Sonoff Led command Color CCWW where CCWW are hexadecimal values fro 00 - FF * Reduce Sonoff Led flickering by disabling interrupts during flash save and disabling * Led during OTA upgrade and Web upload (#16)	2017-02-18 18:08:55 +01:00
arendst	edca508f57	v3.9.17 3.9.17 20170217 * Fix possible ArduinoJSON related memory fragmentation * Changed console logging using less memory * Add GPIO04 as user selectable for Sonoff Dual (#75)	2017-02-17 17:18:41 +01:00
arendst	381bb4b50c	v3.9.16 3.9.16 20170214 * Update latching relay handler * Add support for IR led using IRremoteESP8266 library (#59) * Add Hue argument passing using ArduinoJSON library (#59)	2017-02-14 14:27:08 +01:00
arendst	533855c210	v3.9.15 3.9.15 20170213 * Change JSON float values from string to number according to http://json.org (#56) * Add support for exs latched relay module https://ex-store.de/ESP8266-WiFi-Relay-V31 (#58) * Add support for inverted relays * Changed MAX_LOG_LINES from 70 to 60 to preserve memory	2017-02-13 17:25:46 +01:00
arendst	bb5251c2c8	v3.9.14 3.9.14 20170211 * Add False and True as alternatives for 0/Off and 1/On (#49) * Fix Status10 JSON format (#52) * Fix DS18x20 using OneWire library (#53)	2017-02-11 15:06:23 +01:00
arendst	3a07c9bf6a	v3.9.13 3.9.13 20170210 * Add FlashChipSize to Status 4 * Removed redundant DHT2 option and code * Add Sonoff SV GPIO pin 05 configuration (#40) * Add configuration file backup and restore via web page * Fix latency due to light_sleep mode even if sleep was set to zero (#50)	2017-02-10 17:22:06 +01:00
arendst	cbd1904b42	v3.9.13 3.9.13 20170210 * Add FlashChipSize to Status 4 * Removed redundant DHT2 option and code * Add Sonoff SV GPIO pin 05 configuration (#40) * Add configuration file backup and restore via web page * Fix latency due to light_sleep mode even if sleep was set to zero (#50)	2017-02-10 17:03:34 +01:00
arendst	971ffef4a9	v3.9.12 3.9.12 20170208 * Fix compile error when webserver is disabled (#30) * Fix possible ESP8285 flash problem by updating Flash Chip Mode to DOUT during OTA upload * Fix hostname issues by not allowing user entry of string formatting and removing from user_config.h (#36)	2017-02-08 12:56:51 +01:00
arendst	f751ad1e26	v3.9.11a 3.9.11a * Fix compile error when webserver is disabled (#30)	2017-02-06 10:09:32 +01:00
arendst	41b740b100	v3.9.11a 3.9.11a * Fix compile error when webserver is disabled (#30)	2017-02-06 10:08:40 +01:00