mirror of
https://github.com/olikraus/U8g2_Arduino.git
synced 2026-09-15 03:03:08 +00:00
2.20.4
This commit is contained in:
olikraus
@@ -8,5 +8,5 @@ Description: https://github.com/olikraus/u8g2/wiki
|
||||
|
||||
Issue Tracker: https://github.com/olikraus/u8g2/issues
|
||||
|
||||
Download (2.20.3): https://github.com/olikraus/U8g2_Arduino/archive/master.zip
|
||||
Download (2.20.4): https://github.com/olikraus/U8g2_Arduino/archive/master.zip
|
||||
|
||||
|
||||
@@ -189,6 +189,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -73,6 +73,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -72,6 +72,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -75,6 +75,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -72,6 +72,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -73,6 +73,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_F_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -75,6 +75,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -77,6 +77,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -74,6 +74,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -78,6 +78,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -74,6 +74,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -257,6 +257,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -69,6 +69,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -74,6 +74,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -74,6 +74,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
@@ -86,7 +87,7 @@
|
||||
//U8G2_SSD1322_NHD_256X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // Enable U8G2_16BIT in u8g2.h
|
||||
//U8G2_SSD1325_NHD_128X64_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SSD1325_NHD_128X64_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SSD1326_ER_256X32_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // experimental driver for ER-OLED018-1
|
||||
U8G2_SSD1326_ER_256X32_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // experimental driver for ER-OLED018-1
|
||||
//U8G2_SSD1327_SEEED_96X96_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Seeedstudio Grove OLED 96x96
|
||||
//U8G2_SSD1327_SEEED_96X96_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Seeedstudio Grove OLED 96x96
|
||||
//U8G2_SSD1327_MIDAS_128X128_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
|
||||
@@ -75,6 +75,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -75,6 +75,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -68,6 +68,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -75,6 +75,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -75,6 +75,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -78,6 +78,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -64,6 +64,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -73,6 +73,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
@@ -97,7 +98,7 @@
|
||||
//U8G2_SSD1309_128X64_NONAME0_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SSD1309_128X64_NONAME0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SSD1309_128X64_NONAME2_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SSD1309_128X64_NONAME2_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
U8G2_SSD1309_128X64_NONAME2_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_LD7032_60X32_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* cs=*/ 9, /* dc=*/ 10, /* reset=*/ 8); // SW SPI Nano Board
|
||||
//U8G2_LD7032_60X32_1_4W_SW_I2C u8g2(U8G2_R0, /* clock=*/ 11, /* data=*/ 12, /* reset=*/ U8X8_PIN_NONE); // NOT TESTED!
|
||||
//U8G2_UC1701_EA_DOGS102_1_4W_SW_SPI u8g2(U8G2_R0, /* clock=*/ 13, /* data=*/ 11, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
|
||||
@@ -78,6 +78,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -78,6 +78,7 @@
|
||||
//U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
|
||||
//U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8G2_SSD1306_128X32_UNIVISION_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -61,6 +61,7 @@
|
||||
//U8X8_SH1106_128X64_NONAME_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8X8_SH1106_128X64_NONAME_HW_I2C u8x8(/* reset=*/ U8X8_PIN_NONE);
|
||||
//U8X8_SH1106_128X64_VCOMH0_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8X8_SH1106_128X64_WINSTAR_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8X8_SSD1306_128X32_UNIVISION_SW_I2C u8x8(/* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8X8_SSD1306_128X32_UNIVISION_SW_I2C u8x8(/* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(/* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -63,6 +63,7 @@
|
||||
//U8X8_SH1106_128X64_NONAME_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8X8_SH1106_128X64_NONAME_HW_I2C u8x8(/* reset=*/ U8X8_PIN_NONE);
|
||||
//U8X8_SH1106_128X64_VCOMH0_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8X8_SH1106_128X64_WINSTAR_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8X8_SSD1306_128X32_UNIVISION_SW_I2C u8x8(/* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8X8_SSD1306_128X32_UNIVISION_SW_I2C u8x8(/* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(/* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -60,6 +60,7 @@
|
||||
//U8X8_SH1106_128X64_NONAME_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8X8_SH1106_128X64_NONAME_HW_I2C u8x8(/* reset=*/ U8X8_PIN_NONE);
|
||||
//U8X8_SH1106_128X64_VCOMH0_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8X8_SH1106_128X64_WINSTAR_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8X8_SSD1306_128X32_UNIVISION_SW_I2C u8x8(/* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8X8_SSD1306_128X32_UNIVISION_SW_I2C u8x8(/* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(/* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -60,6 +60,7 @@
|
||||
//U8X8_SH1106_128X64_NONAME_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
|
||||
//U8X8_SH1106_128X64_NONAME_HW_I2C u8x8(/* reset=*/ U8X8_PIN_NONE);
|
||||
//U8X8_SH1106_128X64_VCOMH0_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but maximizes setContrast() range
|
||||
//U8X8_SH1106_128X64_WINSTAR_4W_HW_SPI u8x8(/* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8); // same as the NONAME variant, but uses updated SH1106 init sequence
|
||||
//U8X8_SSD1306_128X32_UNIVISION_SW_I2C u8x8(/* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather ESP8266/32u4 Boards + FeatherWing OLED
|
||||
//U8X8_SSD1306_128X32_UNIVISION_SW_I2C u8x8(/* clock=*/ 21, /* data=*/ 20, /* reset=*/ U8X8_PIN_NONE); // Adafruit Feather M0 Basic Proto + FeatherWing OLED
|
||||
//U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(/* reset=*/ U8X8_PIN_NONE); // Adafruit ESP8266/32u4/ARM Boards + FeatherWing OLED
|
||||
|
||||
@@ -150,5 +150,7 @@ https://github.com/olikraus/u8g2 ChangeLog
|
||||
* Added keywords.txt (issue 402)
|
||||
* Experimental support for SSD1326 (issue 398)
|
||||
* Experimental alternative COM config for SSD1306 128x64 (issue 408)
|
||||
* New SH1106 init sequence (SH1106_WINSTAR, issue 316)
|
||||
|
||||
|
||||
|
||||
|
||||
+1
-1
@@ -1,5 +1,5 @@
|
||||
name=U8g2
|
||||
version=2.20.3
|
||||
version=2.20.4
|
||||
author=oliver <olikraus@gmail.com>
|
||||
maintainer=oliver <olikraus@gmail.com>
|
||||
sentence=Monochrome LCD, OLED and eInk Library. Display controller: SSD1305, SSD1306, SSD1309, SSD1322, SSD1325, SSD1327, SSD1329, SSD1606, SSD1607, SH1106, T6963, RA8835, LC7981, PCD8544, PCF8812, UC1601, UC1604, UC1608, UC1610, UC1611, UC1701, ST7565, ST7567, ST7588, ST75256, NT7534, IST3020, ST7920, LD7032, KS0108, SED1520, SBN1661, IL3820, MAX7219. Interfaces: I2C, SPI, Parallel.
|
||||
|
||||
+162
@@ -1019,6 +1019,42 @@ class U8G2_SH1106_128X64_VCOMH0_1_8080 : public U8G2 {
|
||||
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_1_4W_SW_SPI : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_1_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_1(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_1(&u8g2, rotation, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_1_2ND_4W_HW_SPI : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_1_2ND_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_1(&u8g2, rotation, u8x8_byte_arduino_2nd_hw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_1_3W_SW_SPI : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_1_3W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_1(&u8g2, rotation, u8x8_byte_3wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_3Wire_SW_SPI(getU8x8(), clock, data, cs, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_1_6800 : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_1_6800(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_1(&u8g2, rotation, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_1_8080 : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_1_8080(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_1(&u8g2, rotation, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_NONAME_2_4W_SW_SPI : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_NONAME_2_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_noname_2(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
||||
@@ -1091,6 +1127,42 @@ class U8G2_SH1106_128X64_VCOMH0_2_8080 : public U8G2 {
|
||||
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_2_4W_SW_SPI : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_2_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_2(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_2_4W_HW_SPI : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_2_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_2(&u8g2, rotation, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_2_2ND_4W_HW_SPI : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_2_2ND_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_2(&u8g2, rotation, u8x8_byte_arduino_2nd_hw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_2_3W_SW_SPI : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_2_3W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_2(&u8g2, rotation, u8x8_byte_3wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_3Wire_SW_SPI(getU8x8(), clock, data, cs, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_2_6800 : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_2_6800(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_2(&u8g2, rotation, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_2_8080 : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_2_8080(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_2(&u8g2, rotation, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_NONAME_F_4W_SW_SPI : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_NONAME_F_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_noname_f(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
||||
@@ -1163,6 +1235,42 @@ class U8G2_SH1106_128X64_VCOMH0_F_8080 : public U8G2 {
|
||||
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_F_4W_SW_SPI : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_F_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_f(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_F_4W_HW_SPI : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_F_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_f(&u8g2, rotation, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_F_2ND_4W_HW_SPI : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_F_2ND_4W_HW_SPI(const u8g2_cb_t *rotation, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_f(&u8g2, rotation, u8x8_byte_arduino_2nd_hw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_F_3W_SW_SPI : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_F_3W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_f(&u8g2, rotation, u8x8_byte_3wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_3Wire_SW_SPI(getU8x8(), clock, data, cs, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_F_6800 : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_F_6800(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_f(&u8g2, rotation, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_F_8080 : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_F_8080(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_128x64_winstar_f(&u8g2, rotation, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_NONAME_1_SW_I2C : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_NONAME_1_SW_I2C(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_i2c_128x64_noname_1(&u8g2, rotation, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
@@ -1199,6 +1307,24 @@ class U8G2_SH1106_128X64_VCOMH0_1_2ND_HW_I2C : public U8G2 {
|
||||
u8x8_SetPin_HW_I2C(getU8x8(), reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_1_SW_I2C : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_1_SW_I2C(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_i2c_128x64_winstar_1(&u8g2, rotation, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_SW_I2C(getU8x8(), clock, data, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_1_HW_I2C : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_1_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE, uint8_t clock = U8X8_PIN_NONE, uint8_t data = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_i2c_128x64_winstar_1(&u8g2, rotation, u8x8_byte_arduino_hw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_HW_I2C(getU8x8(), reset, clock, data);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_1_2ND_HW_I2C : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_1_2ND_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_i2c_128x64_winstar_1(&u8g2, rotation, u8x8_byte_arduino_2nd_hw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_HW_I2C(getU8x8(), reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_NONAME_2_SW_I2C : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_NONAME_2_SW_I2C(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_i2c_128x64_noname_2(&u8g2, rotation, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
@@ -1235,6 +1361,24 @@ class U8G2_SH1106_128X64_VCOMH0_2_2ND_HW_I2C : public U8G2 {
|
||||
u8x8_SetPin_HW_I2C(getU8x8(), reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_2_SW_I2C : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_2_SW_I2C(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_i2c_128x64_winstar_2(&u8g2, rotation, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_SW_I2C(getU8x8(), clock, data, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_2_HW_I2C : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_2_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE, uint8_t clock = U8X8_PIN_NONE, uint8_t data = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_i2c_128x64_winstar_2(&u8g2, rotation, u8x8_byte_arduino_hw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_HW_I2C(getU8x8(), reset, clock, data);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_2_2ND_HW_I2C : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_2_2ND_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_i2c_128x64_winstar_2(&u8g2, rotation, u8x8_byte_arduino_2nd_hw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_HW_I2C(getU8x8(), reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_NONAME_F_SW_I2C : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_NONAME_F_SW_I2C(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_i2c_128x64_noname_f(&u8g2, rotation, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
@@ -1271,6 +1415,24 @@ class U8G2_SH1106_128X64_VCOMH0_F_2ND_HW_I2C : public U8G2 {
|
||||
u8x8_SetPin_HW_I2C(getU8x8(), reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_F_SW_I2C : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_F_SW_I2C(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_i2c_128x64_winstar_f(&u8g2, rotation, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_SW_I2C(getU8x8(), clock, data, reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_F_HW_I2C : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_F_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE, uint8_t clock = U8X8_PIN_NONE, uint8_t data = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_i2c_128x64_winstar_f(&u8g2, rotation, u8x8_byte_arduino_hw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_HW_I2C(getU8x8(), reset, clock, data);
|
||||
}
|
||||
};
|
||||
class U8G2_SH1106_128X64_WINSTAR_F_2ND_HW_I2C : public U8G2 {
|
||||
public: U8G2_SH1106_128X64_WINSTAR_F_2ND_HW_I2C(const u8g2_cb_t *rotation, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_sh1106_i2c_128x64_winstar_f(&u8g2, rotation, u8x8_byte_arduino_2nd_hw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_HW_I2C(getU8x8(), reset);
|
||||
}
|
||||
};
|
||||
class U8G2_SSD1306_128X32_UNIVISION_1_4W_SW_SPI : public U8G2 {
|
||||
public: U8G2_SSD1306_128X32_UNIVISION_1_4W_SW_SPI(const u8g2_cb_t *rotation, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
|
||||
u8g2_Setup_ssd1306_128x32_univision_1(&u8g2, rotation, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
||||
|
||||
+56
-1
@@ -85,7 +85,8 @@
|
||||
/* define U8X8_HAVE_2ND_HW_SPI if the board has a second wire interface*/
|
||||
/* As of writing this, I did not found any official board which supports this */
|
||||
/* so this is not tested (May 2017), issue #224 */
|
||||
#ifdef WIRE_INTERFACES_COUNT
|
||||
/* fixed ifdef, #410, #377 */
|
||||
#ifdef SPI_INTERFACES_COUNT
|
||||
#if SPI_INTERFACES_COUNT > 1
|
||||
#define U8X8_HAVE_2ND_HW_SPI
|
||||
#endif
|
||||
@@ -554,6 +555,42 @@ class U8X8_SH1106_128X64_VCOMH0_8080 : public U8X8 {
|
||||
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8X8_SH1106_128X64_WINSTAR_4W_SW_SPI : public U8X8 {
|
||||
public: U8X8_SH1106_128X64_WINSTAR_4W_SW_SPI(uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
||||
u8x8_Setup(getU8x8(), u8x8_d_sh1106_128x64_winstar, u8x8_cad_001, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_4Wire_SW_SPI(getU8x8(), clock, data, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8X8_SH1106_128X64_WINSTAR_4W_HW_SPI : public U8X8 {
|
||||
public: U8X8_SH1106_128X64_WINSTAR_4W_HW_SPI(uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
||||
u8x8_Setup(getU8x8(), u8x8_d_sh1106_128x64_winstar, u8x8_cad_001, u8x8_byte_arduino_hw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8X8_SH1106_128X64_WINSTAR_2ND_4W_HW_SPI : public U8X8 {
|
||||
public: U8X8_SH1106_128X64_WINSTAR_2ND_4W_HW_SPI(uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
||||
u8x8_Setup(getU8x8(), u8x8_d_sh1106_128x64_winstar, u8x8_cad_001, u8x8_byte_arduino_2nd_hw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_4Wire_HW_SPI(getU8x8(), cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8X8_SH1106_128X64_WINSTAR_3W_SW_SPI : public U8X8 {
|
||||
public: U8X8_SH1106_128X64_WINSTAR_3W_SW_SPI(uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
||||
u8x8_Setup(getU8x8(), u8x8_d_sh1106_128x64_winstar, u8x8_cad_001, u8x8_byte_3wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_3Wire_SW_SPI(getU8x8(), clock, data, cs, reset);
|
||||
}
|
||||
};
|
||||
class U8X8_SH1106_128X64_WINSTAR_6800 : public U8X8 {
|
||||
public: U8X8_SH1106_128X64_WINSTAR_6800(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
||||
u8x8_Setup(getU8x8(), u8x8_d_sh1106_128x64_winstar, u8x8_cad_001, u8x8_byte_8bit_6800mode, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_8Bit_6800(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8X8_SH1106_128X64_WINSTAR_8080 : public U8X8 {
|
||||
public: U8X8_SH1106_128X64_WINSTAR_8080(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
||||
u8x8_Setup(getU8x8(), u8x8_d_sh1106_128x64_winstar, u8x8_cad_001, u8x8_byte_arduino_8bit_8080mode, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
|
||||
}
|
||||
};
|
||||
class U8X8_SH1106_128X64_NONAME_SW_I2C : public U8X8 {
|
||||
public: U8X8_SH1106_128X64_NONAME_SW_I2C(uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
||||
u8x8_Setup(getU8x8(), u8x8_d_sh1106_128x64_noname, u8x8_cad_ssd13xx_i2c, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
@@ -590,6 +627,24 @@ class U8X8_SH1106_128X64_VCOMH0_2ND_HW_I2C : public U8X8 {
|
||||
u8x8_SetPin_HW_I2C(getU8x8(), reset);
|
||||
}
|
||||
};
|
||||
class U8X8_SH1106_128X64_WINSTAR_SW_I2C : public U8X8 {
|
||||
public: U8X8_SH1106_128X64_WINSTAR_SW_I2C(uint8_t clock, uint8_t data, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
||||
u8x8_Setup(getU8x8(), u8x8_d_sh1106_128x64_winstar, u8x8_cad_ssd13xx_i2c, u8x8_byte_sw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_SW_I2C(getU8x8(), clock, data, reset);
|
||||
}
|
||||
};
|
||||
class U8X8_SH1106_128X64_WINSTAR_HW_I2C : public U8X8 {
|
||||
public: U8X8_SH1106_128X64_WINSTAR_HW_I2C(uint8_t reset = U8X8_PIN_NONE, uint8_t clock = U8X8_PIN_NONE, uint8_t data = U8X8_PIN_NONE) : U8X8() {
|
||||
u8x8_Setup(getU8x8(), u8x8_d_sh1106_128x64_winstar, u8x8_cad_ssd13xx_i2c, u8x8_byte_arduino_hw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_HW_I2C(getU8x8(), reset, clock, data);
|
||||
}
|
||||
};
|
||||
class U8X8_SH1106_128X64_WINSTAR_2ND_HW_I2C : public U8X8 {
|
||||
public: U8X8_SH1106_128X64_WINSTAR_2ND_HW_I2C(uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
||||
u8x8_Setup(getU8x8(), u8x8_d_sh1106_128x64_winstar, u8x8_cad_ssd13xx_i2c, u8x8_byte_arduino_2nd_hw_i2c, u8x8_gpio_and_delay_arduino);
|
||||
u8x8_SetPin_HW_I2C(getU8x8(), reset);
|
||||
}
|
||||
};
|
||||
class U8X8_SSD1306_128X32_UNIVISION_4W_SW_SPI : public U8X8 {
|
||||
public: U8X8_SSD1306_128X32_UNIVISION_4W_SW_SPI(uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
|
||||
u8x8_Setup(getU8x8(), u8x8_d_ssd1306_128x32_univision, u8x8_cad_001, u8x8_byte_arduino_4wire_sw_spi, u8x8_gpio_and_delay_arduino);
|
||||
|
||||
@@ -548,16 +548,22 @@ void u8g2_Setup_ssd1306_i2c_128x64_vcomh0_f(u8g2_t *u8g2, const u8g2_cb_t *rotat
|
||||
void u8g2_Setup_ssd1306_i2c_128x64_alt0_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_128x64_noname_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_128x64_vcomh0_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_128x64_winstar_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_128x64_noname_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_128x64_vcomh0_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_128x64_winstar_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_128x64_noname_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_128x64_vcomh0_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_128x64_winstar_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_i2c_128x64_noname_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_i2c_128x64_vcomh0_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_i2c_128x64_winstar_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_i2c_128x64_noname_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_i2c_128x64_vcomh0_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_i2c_128x64_winstar_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_i2c_128x64_noname_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_i2c_128x64_vcomh0_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_sh1106_i2c_128x64_winstar_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_ssd1306_128x32_univision_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_ssd1306_128x32_univision_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
void u8g2_Setup_ssd1306_128x32_univision_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
|
||||
|
||||
@@ -229,6 +229,14 @@ void u8g2_Setup_sh1106_128x64_vcomh0_1(u8g2_t *u8g2, const u8g2_cb_t *rotation,
|
||||
buf = u8g2_m_16_8_1(&tile_buf_height);
|
||||
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
|
||||
}
|
||||
void u8g2_Setup_sh1106_128x64_winstar_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
|
||||
{
|
||||
uint8_t tile_buf_height;
|
||||
uint8_t *buf;
|
||||
u8g2_SetupDisplay(u8g2, u8x8_d_sh1106_128x64_winstar, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
|
||||
buf = u8g2_m_16_8_1(&tile_buf_height);
|
||||
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
|
||||
}
|
||||
/* sh1106 2 */
|
||||
void u8g2_Setup_sh1106_128x64_noname_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
|
||||
{
|
||||
@@ -246,6 +254,14 @@ void u8g2_Setup_sh1106_128x64_vcomh0_2(u8g2_t *u8g2, const u8g2_cb_t *rotation,
|
||||
buf = u8g2_m_16_8_2(&tile_buf_height);
|
||||
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
|
||||
}
|
||||
void u8g2_Setup_sh1106_128x64_winstar_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
|
||||
{
|
||||
uint8_t tile_buf_height;
|
||||
uint8_t *buf;
|
||||
u8g2_SetupDisplay(u8g2, u8x8_d_sh1106_128x64_winstar, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
|
||||
buf = u8g2_m_16_8_2(&tile_buf_height);
|
||||
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
|
||||
}
|
||||
/* sh1106 f */
|
||||
void u8g2_Setup_sh1106_128x64_noname_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
|
||||
{
|
||||
@@ -263,6 +279,14 @@ void u8g2_Setup_sh1106_128x64_vcomh0_f(u8g2_t *u8g2, const u8g2_cb_t *rotation,
|
||||
buf = u8g2_m_16_8_f(&tile_buf_height);
|
||||
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
|
||||
}
|
||||
void u8g2_Setup_sh1106_128x64_winstar_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
|
||||
{
|
||||
uint8_t tile_buf_height;
|
||||
uint8_t *buf;
|
||||
u8g2_SetupDisplay(u8g2, u8x8_d_sh1106_128x64_winstar, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
|
||||
buf = u8g2_m_16_8_f(&tile_buf_height);
|
||||
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
|
||||
}
|
||||
/* sh1106 */
|
||||
/* sh1106 1 */
|
||||
void u8g2_Setup_sh1106_i2c_128x64_noname_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
|
||||
@@ -281,6 +305,14 @@ void u8g2_Setup_sh1106_i2c_128x64_vcomh0_1(u8g2_t *u8g2, const u8g2_cb_t *rotati
|
||||
buf = u8g2_m_16_8_1(&tile_buf_height);
|
||||
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
|
||||
}
|
||||
void u8g2_Setup_sh1106_i2c_128x64_winstar_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
|
||||
{
|
||||
uint8_t tile_buf_height;
|
||||
uint8_t *buf;
|
||||
u8g2_SetupDisplay(u8g2, u8x8_d_sh1106_128x64_winstar, u8x8_cad_ssd13xx_i2c, byte_cb, gpio_and_delay_cb);
|
||||
buf = u8g2_m_16_8_1(&tile_buf_height);
|
||||
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
|
||||
}
|
||||
/* sh1106 2 */
|
||||
void u8g2_Setup_sh1106_i2c_128x64_noname_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
|
||||
{
|
||||
@@ -298,6 +330,14 @@ void u8g2_Setup_sh1106_i2c_128x64_vcomh0_2(u8g2_t *u8g2, const u8g2_cb_t *rotati
|
||||
buf = u8g2_m_16_8_2(&tile_buf_height);
|
||||
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
|
||||
}
|
||||
void u8g2_Setup_sh1106_i2c_128x64_winstar_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
|
||||
{
|
||||
uint8_t tile_buf_height;
|
||||
uint8_t *buf;
|
||||
u8g2_SetupDisplay(u8g2, u8x8_d_sh1106_128x64_winstar, u8x8_cad_ssd13xx_i2c, byte_cb, gpio_and_delay_cb);
|
||||
buf = u8g2_m_16_8_2(&tile_buf_height);
|
||||
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
|
||||
}
|
||||
/* sh1106 f */
|
||||
void u8g2_Setup_sh1106_i2c_128x64_noname_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
|
||||
{
|
||||
@@ -315,6 +355,14 @@ void u8g2_Setup_sh1106_i2c_128x64_vcomh0_f(u8g2_t *u8g2, const u8g2_cb_t *rotati
|
||||
buf = u8g2_m_16_8_f(&tile_buf_height);
|
||||
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
|
||||
}
|
||||
void u8g2_Setup_sh1106_i2c_128x64_winstar_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
|
||||
{
|
||||
uint8_t tile_buf_height;
|
||||
uint8_t *buf;
|
||||
u8g2_SetupDisplay(u8g2, u8x8_d_sh1106_128x64_winstar, u8x8_cad_ssd13xx_i2c, byte_cb, gpio_and_delay_cb);
|
||||
buf = u8g2_m_16_8_f(&tile_buf_height);
|
||||
u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
|
||||
}
|
||||
/* ssd1306 */
|
||||
/* ssd1306 1 */
|
||||
void u8g2_Setup_ssd1306_128x32_univision_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
|
||||
|
||||
@@ -757,6 +757,7 @@ uint8_t u8x8_d_ssd1309_128x64_noname0(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int
|
||||
uint8_t u8x8_d_ssd1309_128x64_noname2(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
|
||||
uint8_t u8x8_d_sh1106_128x64_noname(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
|
||||
uint8_t u8x8_d_sh1106_128x64_vcomh0(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
|
||||
uint8_t u8x8_d_sh1106_128x64_winstar(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
|
||||
uint8_t u8x8_d_st7920_192x32(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
|
||||
uint8_t u8x8_d_st7920_128x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
|
||||
uint8_t u8x8_d_ssd1306_128x32_univision(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
|
||||
|
||||
@@ -80,8 +80,10 @@ uint8_t u8x8_d_ls013b7dh03_128x128(u8x8_t *u8x8, uint8_t msg, U8X8_UNUSED uint8_
|
||||
u8x8_d_helper_display_init(u8x8);
|
||||
|
||||
/* clear screen */
|
||||
u8x8_cad_StartTransfer(u8x8);
|
||||
u8x8_cad_SendCmd(u8x8, SWAP8(LS013B7DH03_CMD_ALL_CLEAR) );
|
||||
u8x8_cad_SendCmd(u8x8, LS013B7DH03_VAL_TRAILER);
|
||||
u8x8_cad_EndTransfer(u8x8);
|
||||
|
||||
break;
|
||||
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
|
||||
|
||||
@@ -148,6 +148,31 @@ static const uint8_t u8x8_d_ssd1306_128x64_alt0_init_seq[] = {
|
||||
};
|
||||
|
||||
|
||||
|
||||
/* issue 316: a special sh1106 setup, https://www.mikrocontroller.net/topic/431371?goto=5087807#5087807 */
|
||||
static const uint8_t u8x8_d_sh1106_128x64_winstar_init_seq[] = {
|
||||
|
||||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||||
|
||||
U8X8_C(0xae), // Display OFF/ON: off (POR = 0xae)
|
||||
U8X8_C(0xa4), // Set Entire Display OFF/ON: off (POR = 0xa4)
|
||||
U8X8_CA(0xd5, 0x50), // Divide Ratio/Oscillator FrequencyData Set: divide ratio = 1 (POR = 1), Oscillator Frequency = +/- 0% (POR = +/- 0%)
|
||||
U8X8_CA(0xa8, 0x3f), // Multiplex Ratio Data Set: 64 (POR = 0x3f, 64)
|
||||
U8X8_CA(0xd3, 0x00), // Display OffsetData Set: 0 (POR = 0x00)
|
||||
U8X8_C(0x40), // Set Display Start Line: 0
|
||||
U8X8_CA(0xad, 0x8b), // DC-DC ON/OFF Mode Set: Built-in DC-DC is used, Normal Display (POR = 0x8b)
|
||||
U8X8_CA(0xd9, 0x22), // Dis-charge/Pre-charge PeriodData Set: pre-charge 2 DCLKs, dis-charge 2 DCLKs (POR = 0x22, pre-charge 2 DCLKs, dis-charge 2 DCLKs)
|
||||
U8X8_CA(0xdb, 0x35), // VCOM Deselect LevelData Set: 0,770V (POR = 0x35, 0,770 V)
|
||||
U8X8_C(0x32), // Set Pump voltage value: 8,0 V (POR = 0x32, 8,0 V)
|
||||
U8X8_CA(0x81, 0xff), // Contrast Data Register Set: 255 (large) (POR = 0x80)
|
||||
U8X8_C(0x0a6), // Set Normal/Reverse Display: normal (POR = 0xa6)
|
||||
U8X8_CA(0x0da, 0x012), // com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5)
|
||||
|
||||
U8X8_END_TRANSFER(), /* disable chip */
|
||||
U8X8_END() /* end of sequence */
|
||||
};
|
||||
|
||||
|
||||
static const uint8_t u8x8_d_ssd1306_128x64_noname_powersave0_seq[] = {
|
||||
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
||||
U8X8_C(0x0af), /* display on */
|
||||
@@ -383,6 +408,7 @@ uint8_t u8x8_d_sh1106_128x64_noname(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int,
|
||||
u8x8_d_helper_display_init(u8x8);
|
||||
/* maybe use a better init sequence */
|
||||
/* https://www.mikrocontroller.net/topic/431371 */
|
||||
/* the new sequence is added in the winstar constructor (see below), this is kept untouched */
|
||||
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_128x64_noname_init_seq);
|
||||
break;
|
||||
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
||||
@@ -415,3 +441,25 @@ uint8_t u8x8_d_sh1106_128x64_vcomh0(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int,
|
||||
return 1;
|
||||
|
||||
}
|
||||
|
||||
uint8_t u8x8_d_sh1106_128x64_winstar(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
||||
{
|
||||
if ( u8x8_d_ssd1306_sh1106_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
|
||||
return 1;
|
||||
|
||||
switch(msg)
|
||||
{
|
||||
case U8X8_MSG_DISPLAY_INIT:
|
||||
u8x8_d_helper_display_init(u8x8);
|
||||
u8x8_cad_SendSequence(u8x8, u8x8_d_sh1106_128x64_winstar_init_seq);
|
||||
break;
|
||||
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
||||
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_sh1106_128x64_noname_display_info);
|
||||
break;
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
return 1;
|
||||
|
||||
}
|
||||
|
||||
|
||||
@@ -49,7 +49,7 @@ static const uint8_t u8x8_d_ssd1326_er_256x32_init_seq[] = {
|
||||
U8X8_CA(0x0a8, 0x01f), /* multiplex ratio: 0x03f * 1/64 duty - changed by CREESOO, acc. to datasheet, 100317*/
|
||||
U8X8_CA(0x0a1, 0x000), /* display start line */
|
||||
U8X8_CA(0x0a2, 0x000), /* display offset, shift mapping ram counter */
|
||||
//U8X8_CA(0x0ad, 0x002), /* master configuration: disable embedded DC-DC, enable internal VCOMH */
|
||||
U8X8_CA(0x0ad, 0x002), /* master configuration: disable embedded DC-DC, enable internal VCOMH */
|
||||
U8X8_CA(0x0a0, 0x052), /* remap configuration, horizontal address increment (bit 2 = 0), enable nibble remap (upper nibble is left, bit 1 = 1) */
|
||||
U8X8_C(0x086), /* full current range (0x084, 0x085, 0x086) */
|
||||
|
||||
@@ -203,14 +203,16 @@ static uint8_t u8x8_d_ssd1326_256x32_generic(u8x8_t *u8x8, uint8_t msg, uint8_t
|
||||
|
||||
do
|
||||
{
|
||||
/* tile is empty, use the graphics acceleration command */
|
||||
/* are this really available on the ssd1326??? */
|
||||
u8x8_cad_SendCmd(u8x8, 0x024 ); // draw rectangle
|
||||
u8x8_cad_SendArg(u8x8, x );
|
||||
u8x8_cad_SendArg(u8x8, y );
|
||||
u8x8_cad_SendArg(u8x8, x+3 );
|
||||
u8x8_cad_SendArg(u8x8, y+7 );
|
||||
u8x8_cad_SendArg(u8x8, 0 ); // clear
|
||||
u8x8_cad_SendCmd(u8x8, 0x015 ); /* set column address */
|
||||
u8x8_cad_SendArg(u8x8, x ); /* start */
|
||||
u8x8_cad_SendArg(u8x8, x+3 ); /* end */
|
||||
|
||||
u8x8_cad_SendCmd(u8x8, 0x075 ); /* set row address */
|
||||
u8x8_cad_SendArg(u8x8, y);
|
||||
u8x8_cad_SendArg(u8x8, y+7);
|
||||
|
||||
u8x8_cad_SendData(u8x8, 32, u8x8_ssd1326_8to32(u8x8, ptr));
|
||||
|
||||
ptr += 8;
|
||||
x += 4;
|
||||
c--;
|
||||
|
||||
Reference in New Issue
Block a user