mirror of
https://github.com/athom-tech/esp32-configs.git
synced 2026-07-27 19:56:13 +00:00
add esp32-c5 power monitoring smart plug
This commit is contained in:
Aiden
@@ -0,0 +1,385 @@
|
||||
substitutions:
|
||||
# Default name
|
||||
name: "athom-smart-plug-v5"
|
||||
# Default friendly name
|
||||
friendly_name: "Athom Plug V5"
|
||||
# Allows ESP device to be automatically linked to an 'Area' in Home Assistant. Typically used for areas such as 'Lounge Room', 'Kitchen' etc
|
||||
room: ""
|
||||
# Description as appears in ESPHome & top of webserver page
|
||||
device_description: "athom esp32-c5 power monitoring smart plug"
|
||||
# Project Name
|
||||
project_name: "China Athom Technology.Athom Plug V5"
|
||||
# Projection version denotes the release version of the yaml file, allowing checking of deployed vs latest version
|
||||
project_version: "v5.0.1"
|
||||
# Restore the relay (GPO switch) upon reboot to state:
|
||||
relay_restore_mode: RESTORE_DEFAULT_ON
|
||||
# Set the update interval for sensors
|
||||
sensor_update_interval: 10s
|
||||
# Current Limit in Amps. AU Plug = 10. IL, BR, EU, UK, US Plug = 16.
|
||||
current_limit : "16"
|
||||
# Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
|
||||
dns_domain: ".local"
|
||||
# Set timezone of the smart plug. Useful if the plug is in a location different to the HA server. Can be entered in unix Country/Area format (i.e. "Australia/Sydney")
|
||||
timezone: ""
|
||||
# Set the duration between the sntp service polling ntp.org servers for an update
|
||||
sntp_update_interval: 6h
|
||||
# Network time servers for your region, enter from lowest to highest priority. To use local servers update as per zones or countries at: https://www.ntppool.org/zone/@
|
||||
sntp_server_1: "0.pool.ntp.org"
|
||||
sntp_server_2: "1.pool.ntp.org"
|
||||
sntp_server_3: "2.pool.ntp.org"
|
||||
# Enables faster network connections, with last connected SSID being connected to and no full scan for SSID being undertaken
|
||||
wifi_fast_connect: "false"
|
||||
# Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
|
||||
log_level: "DEBUG"
|
||||
# Enable or disable the use of IPv6 networking on the device
|
||||
ipv6_enable: "false"
|
||||
# Power plug icon selection. Change to reflect the type/country of powr plug in use, this will update the power plug icon shown next to the switch
|
||||
power_plug_type: "power-socket-eu" # Options: power-socket-au | power-socket-ch | power-socket-de | power-socket-eu | power-socket-fr | power-socket-it | power-socket-jp | power-socket-uk | power-socket-us |
|
||||
|
||||
########################## End of Substitutions #########################
|
||||
|
||||
esphome:
|
||||
name: "${name}"
|
||||
friendly_name: "${friendly_name}"
|
||||
comment: "${device_description}"
|
||||
area: "${room}"
|
||||
name_add_mac_suffix: true
|
||||
min_version: 2026.5.1
|
||||
project:
|
||||
name: "${project_name}"
|
||||
version: "${project_version}"
|
||||
platformio_options:
|
||||
board_build.mcu: esp32c5
|
||||
board_build.variant: esp32c5
|
||||
board_build.flash_mode: qio
|
||||
on_boot:
|
||||
- priority: 600
|
||||
then:
|
||||
- select.set_index:
|
||||
id: power_mode
|
||||
index: !lambda |-
|
||||
return id(restore_mode)-1;
|
||||
- lambda: |-
|
||||
switch(id(restore_mode))
|
||||
{
|
||||
case 1:{
|
||||
id(relay).turn_off();
|
||||
break;
|
||||
}
|
||||
case 2:{
|
||||
id(relay).turn_on();
|
||||
break;
|
||||
}
|
||||
default:{
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
esp32:
|
||||
board: esp32-c5-devkitc1-n4
|
||||
flash_size: 4MB
|
||||
variant: ESP32C5
|
||||
framework:
|
||||
type: esp-idf
|
||||
version: recommended
|
||||
sdkconfig_options:
|
||||
# @grigi found in testing that these options resulted in better responsiveness.
|
||||
# BLE 4.2 is supported by ALL ESP32 boards that have bluetooth, the original and derivatives.
|
||||
CONFIG_BT_BLE_42_FEATURES_SUPPORTED: y
|
||||
# Also enable this on any derivative boards (S2, C3 etc) but not the original ESP32.
|
||||
CONFIG_BT_BLE_50_FEATURES_SUPPORTED: y
|
||||
# Extend the watchdog timeout, so the device reboots if the device appears locked up for over 10 seconds.
|
||||
CONFIG_ESP_TASK_WDT_TIMEOUT_S: "10"
|
||||
|
||||
preferences:
|
||||
flash_write_interval: 5min
|
||||
|
||||
api:
|
||||
# reboot_timeout: 0s
|
||||
# Only enable BLE tracking when wifi is up and api is connected
|
||||
# Gives single-core ESP32-C5 devices time to manage wifi and authenticate with api
|
||||
on_client_connected:
|
||||
- esp32_ble_tracker.start_scan:
|
||||
continuous: true
|
||||
# Disable BLE tracking when there are no api connections live
|
||||
on_client_disconnected:
|
||||
if:
|
||||
condition:
|
||||
not:
|
||||
api.connected:
|
||||
then:
|
||||
- esp32_ble_tracker.stop_scan:
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
logger:
|
||||
baud_rate: 0 # 0 Enables logging, but disables serial-port logging to free CPU and memory
|
||||
level: ${log_level}
|
||||
|
||||
mdns:
|
||||
disabled: false
|
||||
|
||||
web_server:
|
||||
port: 80
|
||||
# version: 3
|
||||
|
||||
network:
|
||||
enable_ipv6: ${ipv6_enable}
|
||||
|
||||
wifi:
|
||||
# This spawns an AP with the device name and mac address with no password.
|
||||
ap: {}
|
||||
# Allow rapid re-connection to previously connect WiFi SSID, skipping scan of all SSID
|
||||
fast_connect: "${wifi_fast_connect}"
|
||||
# Define dns domain / suffix to add to hostname
|
||||
domain: "${dns_domain}"
|
||||
|
||||
captive_portal:
|
||||
|
||||
esp32_improv:
|
||||
authorizer: none
|
||||
|
||||
esp32_ble_tracker:
|
||||
scan_parameters:
|
||||
# Don't auto start BLE scanning, we control it in the `api` block's automation.
|
||||
continuous: false
|
||||
active: true # send scan-request packets to gather more info, like device name for some devices.
|
||||
interval: 320ms # default 320ms - how long to spend on each advert channel
|
||||
window: 300ms # default 30ms - how long to actually "listen" in each interval. Reduce this if device is unstable.
|
||||
# If the device cannot keep up or becomes unstable, reduce the "window" setting. This may be
|
||||
# required if your device is controlling other sensors or doing PWM for lights etc.
|
||||
|
||||
bluetooth_proxy:
|
||||
active: true
|
||||
|
||||
dashboard_import:
|
||||
package_import_url: github://athom-tech/esp32-configs/athom-smart-plug-v5.yaml
|
||||
|
||||
uart:
|
||||
rx_pin: GPIO12
|
||||
tx_pin: GPIO11
|
||||
baud_rate: 4800
|
||||
stop_bits: 1
|
||||
|
||||
|
||||
globals:
|
||||
- id: total_energy
|
||||
type: float
|
||||
restore_value: yes
|
||||
initial_value: '0.0'
|
||||
|
||||
- id: restore_mode
|
||||
type: int
|
||||
restore_value: yes
|
||||
initial_value: "2" # 0 = Always_Off. 1 = Restore_Power_Off. 2 = Always_On.
|
||||
|
||||
select:
|
||||
- platform: template
|
||||
name: "Power On State"
|
||||
id: "power_mode"
|
||||
optimistic: true
|
||||
icon: mdi:electric-switch
|
||||
options:
|
||||
- Always Off
|
||||
- Always On
|
||||
- Restore Power Off State
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
id(restore_mode)=i+1;
|
||||
|
||||
binary_sensor:
|
||||
- platform: status
|
||||
name: "Status"
|
||||
icon: mdi:check-network-outline
|
||||
entity_category: diagnostic
|
||||
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO10
|
||||
mode: INPUT_PULLUP
|
||||
inverted: true
|
||||
name: "Power Button"
|
||||
id: power_button
|
||||
disabled_by_default: true
|
||||
on_multi_click:
|
||||
- timing:
|
||||
- ON for at most 1s
|
||||
- OFF for at least 0.2s
|
||||
then:
|
||||
- switch.toggle: relay
|
||||
- timing:
|
||||
- ON for at least 4s
|
||||
then:
|
||||
- button.press: Reset
|
||||
|
||||
sensor:
|
||||
- platform: uptime
|
||||
name: "Uptime Sensor"
|
||||
id: uptime_sensor
|
||||
type:
|
||||
timestamp
|
||||
entity_category: "diagnostic"
|
||||
|
||||
- platform: wifi_signal
|
||||
name: "WiFi Signal dB"
|
||||
id: wifi_signal_db
|
||||
update_interval: 60s
|
||||
entity_category: "diagnostic"
|
||||
|
||||
- platform: copy
|
||||
source_id: wifi_signal_db
|
||||
name: "WiFi Signal Percent"
|
||||
filters:
|
||||
- lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
|
||||
unit_of_measurement: "Signal %"
|
||||
entity_category: "diagnostic"
|
||||
device_class: ""
|
||||
|
||||
- platform: bl0942
|
||||
id: bl0942_sensor
|
||||
voltage:
|
||||
name: "Voltage"
|
||||
icon: mdi:sine-wave
|
||||
filters:
|
||||
- throttle_average: ${sensor_update_interval}
|
||||
|
||||
current:
|
||||
name: "Current"
|
||||
icon: mdi:current-ac
|
||||
filters:
|
||||
- throttle_average: ${sensor_update_interval}
|
||||
on_value_range:
|
||||
- above: ${current_limit}
|
||||
then:
|
||||
- switch.turn_off: relay
|
||||
|
||||
power:
|
||||
name: "Power"
|
||||
id: power_sensor
|
||||
icon: mdi:power
|
||||
filters:
|
||||
- throttle_average: ${sensor_update_interval}
|
||||
|
||||
frequency:
|
||||
name: "Frequency"
|
||||
|
||||
energy:
|
||||
name: "Energy"
|
||||
id: energy
|
||||
icon: mdi:lightning-bolt
|
||||
unit_of_measurement: kWh
|
||||
filters:
|
||||
- throttle: ${sensor_update_interval}
|
||||
# Multiplication factor from W to kW is 0.001
|
||||
- multiply: 0.001
|
||||
on_value:
|
||||
then:
|
||||
- lambda: |-
|
||||
static float previous_energy_value = 0.0;
|
||||
float current_energy_value = id(energy).state;
|
||||
id(total_energy) += current_energy_value - previous_energy_value;
|
||||
previous_energy_value = current_energy_value;
|
||||
id(total_energy_sensor).update();
|
||||
|
||||
- platform: template
|
||||
name: "Total Energy"
|
||||
id: total_energy_sensor
|
||||
unit_of_measurement: kWh
|
||||
device_class: "energy"
|
||||
state_class: "total_increasing"
|
||||
icon: mdi:lightning-bolt
|
||||
accuracy_decimals: 3
|
||||
lambda: |-
|
||||
return id(total_energy);
|
||||
update_interval: ${sensor_update_interval}
|
||||
|
||||
- platform: total_daily_energy
|
||||
name: "Total Daily Energy"
|
||||
restore: true
|
||||
power_id: power_sensor
|
||||
unit_of_measurement: kWh
|
||||
icon: mdi:hours-24
|
||||
accuracy_decimals: 3
|
||||
filters:
|
||||
- multiply: 0.001
|
||||
|
||||
button:
|
||||
- platform: restart
|
||||
name: "Restart"
|
||||
entity_category: config
|
||||
|
||||
- platform: factory_reset
|
||||
name: "Factory Reset"
|
||||
id: Reset
|
||||
entity_category: config
|
||||
|
||||
- platform: safe_mode
|
||||
name: "Safe Mode"
|
||||
internal: false
|
||||
entity_category: config
|
||||
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: "Switch"
|
||||
pin: GPIO23
|
||||
id: relay
|
||||
restore_mode: ${relay_restore_mode}
|
||||
icon: mdi:${power_plug_type}
|
||||
|
||||
light:
|
||||
- platform: status_led
|
||||
name: "Status LED"
|
||||
id: blue_led
|
||||
icon: mdi:lightbulb-outline
|
||||
disabled_by_default: true
|
||||
pin:
|
||||
inverted: true
|
||||
number: GPIO6
|
||||
|
||||
text_sensor:
|
||||
- platform: wifi_info
|
||||
ip_address:
|
||||
name: "IP Address"
|
||||
icon: mdi:ip-network
|
||||
entity_category: diagnostic
|
||||
ssid:
|
||||
name: "Connected SSID"
|
||||
icon: mdi:wifi-strength-2
|
||||
entity_category: diagnostic
|
||||
mac_address:
|
||||
name: "Mac Address"
|
||||
icon: mdi:network-pos
|
||||
entity_category: diagnostic
|
||||
|
||||
# Creates a sensor showing when the device was last restarted
|
||||
- platform: template
|
||||
name: 'Last Restart'
|
||||
id: device_last_restart
|
||||
icon: mdi:clock
|
||||
entity_category: diagnostic
|
||||
|
||||
time:
|
||||
- platform: sntp
|
||||
id: sntp_time
|
||||
# Define the timezone of the device
|
||||
timezone: "${timezone}"
|
||||
# Change sync interval from default 5min to 6 hours (or as set in substitutions)
|
||||
update_interval: ${sntp_update_interval}
|
||||
# Set specific sntp servers to use
|
||||
servers:
|
||||
- "${sntp_server_1}"
|
||||
- "${sntp_server_2}"
|
||||
- "${sntp_server_3}"
|
||||
# Publish the time the device was last restarted
|
||||
on_time_sync:
|
||||
then:
|
||||
# Update last restart time, but only once.
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return id(device_last_restart).state == "";'
|
||||
then:
|
||||
- text_sensor.template.publish:
|
||||
id: device_last_restart
|
||||
state: !lambda 'return id(sntp_time).now().strftime("%a %d %b %Y - %I:%M:%S %p");'
|
||||
@@ -8,9 +8,9 @@ substitutions:
|
||||
# Description as appears in ESPHome & top of webserver page
|
||||
device_description: "athom esp32-c3 power monitoring smart plug"
|
||||
# Project Name
|
||||
project_name: "China Athom Technology.Smart Plug V3"
|
||||
project_name: "China Athom Technology.Athom Plug V3"
|
||||
# Projection version denotes the release version of the yaml file, allowing checking of deployed vs latest version
|
||||
project_version: "v2.0.1"
|
||||
project_version: "v2.0.2"
|
||||
# Restore the relay (GPO switch) upon reboot to state:
|
||||
relay_restore_mode: RESTORE_DEFAULT_ON
|
||||
# Set the update interval for sensors
|
||||
|
||||
Reference in New Issue
Block a user