Add button debounce

athom-2ch-relay-board.yaml

@@ -4,7 +4,7 @@ substitutions:
   room: ""
   device_description: "athom esp32 2ch relay board"
   project_name: "Athom Technology.ESP32 2CH Relay Board"
-  project_version: "v2.0.7"
+  project_version: "v2.0.8"
   update_interval: 60s
   # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
   dns_domain: ".local"
@@ -31,7 +31,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"
   name_add_mac_suffix: true
-  min_version: 2026.6.0
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -156,6 +156,9 @@ binary_sensor:
       inverted: true
     name: "Power Button1"
     disabled_by_default: true
+    id: power_button1
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at most 1s
@@ -174,6 +177,9 @@ binary_sensor:
       inverted: true
     name: "Power Button2"
     disabled_by_default: true
+    id: power_button2
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at most 1s

athom-4ch-relay-board.yaml

@@ -4,7 +4,7 @@ substitutions:
   room: ""
   device_description: "athom esp32 4ch relay board"
   project_name: "Athom Technology.ESP32 4CH Relay Board"
-  project_version: "v2.0.7"
+  project_version: "v2.0.8"
   update_interval: 60s
   # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
   dns_domain: ".local"
@@ -33,7 +33,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"
   name_add_mac_suffix: true
-  min_version: 2026.6.0
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -157,6 +157,9 @@ binary_sensor:
       inverted: true
     name: "Power Button1"
     disabled_by_default: true
+    id: power_button1
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at most 1s
@@ -175,6 +178,9 @@ binary_sensor:
       inverted: true
     name: "Power Button2"
     disabled_by_default: true
+    id: power_button2
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at most 1s
@@ -193,6 +199,9 @@ binary_sensor:
       inverted: true
     name: "Power Button3"
     disabled_by_default: true
+    id: power_button3
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at most 1s
@@ -211,6 +220,9 @@ binary_sensor:
       inverted: true
     name: "Power Button4"
     disabled_by_default: true
+    id: power_button4
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at most 1s

athom-8ch-relay-board.yaml

@@ -4,7 +4,7 @@ substitutions:
   room: ""
   device_description: "athom esp32 8ch relay board"
   project_name: "Athom Technology.ESP32 8CH Relay Board"
-  project_version: "v2.0.7"
+  project_version: "v2.0.8"
   update_interval: 60s
   # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
   dns_domain: ".local"
@@ -37,7 +37,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"
   name_add_mac_suffix: true
-  min_version: 2026.6.0
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -161,6 +161,9 @@ binary_sensor:
       inverted: true
     name: "Power Button1"
     disabled_by_default: true
+    id: power_button1
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at most 1s
@@ -179,6 +182,9 @@ binary_sensor:
       inverted: true
     name: "Power Button2"
     disabled_by_default: true
+    id: power_button2
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at most 1s
@@ -197,6 +203,9 @@ binary_sensor:
       inverted: true
     name: "Power Button3"
     disabled_by_default: true
+    id: power_button3
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at most 1s
@@ -215,6 +224,9 @@ binary_sensor:
       inverted: true
     name: "Power Button4"
     disabled_by_default: true
+    id: power_button4
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at most 1s
@@ -233,6 +245,9 @@ binary_sensor:
       inverted: true
     name: "Power Button5"
     disabled_by_default: true
+    id: power_button5
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at most 1s
@@ -251,6 +266,9 @@ binary_sensor:
       inverted: true
     name: "Power Button6"
     disabled_by_default: true
+    id: power_button6
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at most 1s
@@ -268,7 +286,10 @@ binary_sensor:
         input: true
       inverted: true
     name: "Power Button7"
+    id: power_button7
     disabled_by_default: true
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at most 1s
@@ -287,6 +308,9 @@ binary_sensor:
       inverted: true
     name: "Power Button8"
     disabled_by_default: true
+    id: power_button8
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at most 1s

athom-dual-smart-plug-v3.yaml

@@ -10,7 +10,7 @@ substitutions:
   # Project Name
   project_name: China Athom Technology.Athom Dual Plug V3
   # Projection version denotes the release version of the yaml file, allowing checking of deployed vs latest version
-  project_version: v3.0.5
+  project_version: v3.0.6
   # Restore the relay (GPO switch) upon reboot to state:
   relay1_restore_mode: RESTORE_DEFAULT_ON
   relay2_restore_mode: RESTORE_DEFAULT_ON
@@ -45,7 +45,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"  
   name_add_mac_suffix: true
-  min_version: 2026.6.0
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -239,6 +239,8 @@ binary_sensor:
     name: "Power Button1"
     id: power_button1
     disabled_by_default: true
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
           - ON for at most 1s
@@ -268,6 +270,8 @@ binary_sensor:
     name: "Power Button2"
     id: power_button2
     disabled_by_default: true
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
           - ON for at most 1s

athom-energy-monitor-x2.yaml

@@ -5,7 +5,7 @@ substitutions:
   room: ""
   device_description: "athom bl0906 energy meter (2 channels)"
   project_name: "China Athom Technology.Athom Energy Meter(2 Channels)"
-  project_version: "3.0.4"
+  project_version: "3.0.5"
   update_interval: 5s
   # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
   dns_domain: ".local"
@@ -43,7 +43,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"
   name_add_mac_suffix: true
-  min_version: 2026.6.0
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -202,6 +202,9 @@ binary_sensor:
       inverted: true
     name: "Power Button"
     disabled_by_default: true
+    id: power_button
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at least 4s

athom-energy-monitor-x6.yaml

@@ -5,7 +5,7 @@ substitutions:
   room: ""
   device_description: "athom bl0906 energy meter (6 channels)"
   project_name: "China Athom Technology.Athom Energy Meter(6 Channels)"
-  project_version: "3.0.5"
+  project_version: "3.0.6"
   update_interval: 5s
   # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
   dns_domain: ".local"
@@ -55,7 +55,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"
   name_add_mac_suffix: true
-  min_version: 2026.6.0
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -258,6 +258,9 @@ binary_sensor:
       inverted: true
     name: "Power Button"
     disabled_by_default: true
+    id: power_button
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at least 4s

athom-garage-door.yaml

@@ -10,7 +10,7 @@ substitutions:
   # Project Name
   project_name: "China Athom Technology.Garage Door Opener"
   # Project version denotes the release version of the yaml file, allowing checking of deployed vs latest version
-  project_version: "v3.1.4"
+  project_version: "v3.1.5"
   # Status inverted
   status_inverted: "true"
   # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
@@ -37,7 +37,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"
   name_add_mac_suffix: true
-  min_version: 2025.8.0
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -187,6 +187,8 @@ binary_sensor:
       inverted: true
     name: "Button"
     disabled_by_default: true
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
           - ON for at most 1s
@@ -271,7 +273,7 @@ text_sensor:
     id: device_last_restart
     icon: mdi:clock
     entity_category: diagnostic
-    device_class: timestamp
+    # device_class: timestamp
 
 time:
   - platform: sntp

athom-ld2450-sensor.yaml

@@ -4,7 +4,7 @@ substitutions:
   room: ""
   device_description: "athom esp32c3 ld2450 motion target tracking sensor"
   project_name: "China Athom Technology.PS02C3MZ LD2450"
-  project_version: "v2.0.6"
+  project_version: "v2.0.7"
   update_interval: 60s
   # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
   dns_domain: ""
@@ -29,7 +29,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"
   name_add_mac_suffix: true
-  min_version: 2025.7.0
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -327,6 +327,8 @@ binary_sensor:
       inverted: true
     name: "Button"
     disabled_by_default: true
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
           - ON for at least 4s

athom-mini-relay-v2.yaml

@@ -10,7 +10,7 @@ substitutions:
   # Project Name
   project_name: "China Athom Technology.Mini Relay V2"
   # Projection version denotes the release version of the yaml file, allowing checking of deployed vs latest version
-  project_version: "v3.1.2"
+  project_version: "v3.1.3"
    # Restore the relay (GPO switch) upon reboot to state:
   light_restore_mode: RESTORE_DEFAULT_OFF
   # Set the update interval for sensors
@@ -42,7 +42,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"  
   name_add_mac_suffix: true
-  min_version: 2025.8.0
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -177,6 +177,9 @@ binary_sensor:
       inverted: true
     name: "Power Button"
     disabled_by_default: true
+    id: power_button
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
           - ON for at most 1s
@@ -197,6 +200,8 @@ binary_sensor:
       mode: INPUT_PULLUP
     on_state:
       - light.toggle: mini_relay
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
           - ON for at most 0.5s

athom-presence-sensor-v3.yaml

@@ -10,7 +10,7 @@ substitutions:
   # Project Name
   project_name: "Athom Technology.Athom PS01C3 Presence Sensor"
   # Projection version denotes the release version of the yaml file, allowing checking of deployed vs latest version
-  project_version: "v4.0.2"
+  project_version: "v4.0.3"
   # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
   dns_domain: ".local"
   # Set timezone of the smart plug. Useful if the plug is in a location different to the HA server. Can be entered in unix Country/Area format (i.e. "Australia/Sydney")
@@ -34,7 +34,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"
   name_add_mac_suffix: true
-  min_version: 2026.6.0
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -180,6 +180,9 @@ binary_sensor:
       inverted: true
     name: "Button"
     disabled_by_default: true
+    id: button
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
           - ON for at least 4s

athom-rf-ir-remote.yaml

@@ -10,7 +10,7 @@ substitutions:
   # Project Name
   project_name: "China Athom Technology.Athom RF IR Remote"
   # Projection version denotes the release version of the yaml file, allowing checking of deployed vs latest version
-  project_version: "v3.0.7"
+  project_version: "v3.0.8"
   # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
   dns_domain: ".local"
   # Set timezone of the smart plug. Useful if the plug is in a location different to the HA server. Can be entered in unix Country/Area format (i.e. "Australia/Sydney")
@@ -46,7 +46,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"
   name_add_mac_suffix: true
-  min_version: 2026.5.1
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -305,6 +305,9 @@ binary_sensor:
       inverted: true
     name: "Button"
     disabled_by_default: true
+    id: power_button
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
           - ON for at least 4s

athom-scd40-sensor.yaml

@@ -5,7 +5,7 @@ substitutions:
   room: ""
   device_description: "athom scd40 CO₂ sensor"
   project_name: "China Athom Technology.CO₂ Sensor"
-  project_version: "1.0.10"
+  project_version: "1.0.11"
   update_interval: 5s
   # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
   dns_domain: ".local"
@@ -37,7 +37,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"
   name_add_mac_suffix: true
-  min_version: 2026.6.0
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -214,6 +214,9 @@ binary_sensor:
       inverted: true
     name: "Power Button"
     disabled_by_default: true
+    id: power_button
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at least 4s
@@ -276,7 +279,7 @@ text_sensor:
     id: device_last_restart
     icon: mdi:clock
     entity_category: diagnostic
-    device_class: timestamp
+    # device_class: timestamp
 
   - platform: template
     name: "Air Quality Index"

athom-sht40-sensor.yaml

@@ -5,7 +5,7 @@ substitutions:
   room: ""
   device_description: "athom sht40 temperature and humidity sensor"
   project_name: "China Athom Technology.Temperature Humidity Sensor"
-  project_version: "1.0.9"
+  project_version: "1.0.10"
   update_interval: 5s
   # Define a domain for this device to use. i.e. iot.home.lan (so device will appear as athom-smart-plug-v2.iot.home.lan in DNS/DHCP logs)
   dns_domain: ".local"
@@ -39,7 +39,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"
   name_add_mac_suffix: true
-  min_version: 2026.6.0
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -253,6 +253,9 @@ binary_sensor:
       inverted: true
     name: "Power Button"
     disabled_by_default: true
+    id: power_button
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
         - ON for at least 4s
@@ -303,7 +306,7 @@ text_sensor:
     id: device_last_restart
     icon: mdi:clock
     entity_category: diagnostic
-    device_class: timestamp
+    # device_class: timestamp
 
 time:
   - platform: sntp

athom-smart-plug-v5.yaml

@@ -10,7 +10,7 @@ substitutions:
   # Project Name
   project_name: "China Athom Technology.Athom Plug V5"
   # Projection version denotes the release version of the yaml file, allowing checking of deployed vs latest version
-  project_version: "v5.0.4"
+  project_version: "v5.0.5"
   # Restore the relay (GPO switch) upon reboot to state:
   relay_restore_mode: RESTORE_DEFAULT_ON
   # Set the update interval for sensors
@@ -44,7 +44,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"  
   name_add_mac_suffix: true
-  min_version: 2026.6.0
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -204,6 +204,8 @@ binary_sensor:
     name: "Power Button"
     id: power_button
     disabled_by_default: true
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
           - ON for at most 1s

athom-smart-plug.yaml

@@ -10,7 +10,7 @@ substitutions:
   # Project Name
   project_name: "China Athom Technology.Athom Plug V3"
   # Projection version denotes the release version of the yaml file, allowing checking of deployed vs latest version
-  project_version: "v2.0.7"
+  project_version: "v2.0.8"
   # Restore the relay (GPO switch) upon reboot to state:
   relay_restore_mode: RESTORE_DEFAULT_ON
   # Set the update interval for sensors
@@ -30,7 +30,7 @@ substitutions:
   # Enables faster network connections, with last connected SSID being connected to and no full scan for SSID being undertaken
   wifi_fast_connect: "false"
   # Define logging level: NONE, ERROR, WARN, INFO, DEBUG (Default), VERBOSE, VERY_VERBOSE
-  log_level: "INFO"
+  log_level: "DEBUG"
   # Hide the ENERGY sensor that shows kWh consumed, but with no time period associated with it. Resets when device restarted and reflashed.
   hide_energy_sensor: "true"
   # Enable or disable the use of IPv6 networking on the device
@@ -46,7 +46,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"  
   name_add_mac_suffix: true
-  min_version: 2026.6.0
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -229,6 +229,8 @@ binary_sensor:
     name: "Power Button"
     id: power_button
     disabled_by_default: true
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
           - ON for at most 1s

athom-wall-outlet-v3.yaml

@@ -10,7 +10,7 @@ substitutions:
   # Project Name
   project_name: "China Athom Technology.Athom Wall Outlet V3"
   # Projection version denotes the release version of the yaml file, allowing checking of deployed vs latest version
-  project_version: "v3.0.3"
+  project_version: "v3.0.4"
   # Restore the relay (GPO switch) upon reboot to state:
   relay_restore_mode: RESTORE_DEFAULT_OFF
   # Set the update interval for sensors
@@ -46,7 +46,7 @@ esphome:
   comment: "${device_description}"
   area: "${room}"  
   name_add_mac_suffix: true
-  min_version: 2026.6.0
+  min_version: 2026.8.0
   project:
     name: "${project_name}"
     version: "${project_version}"
@@ -226,16 +226,28 @@ binary_sensor:
     name: "Power Button"
     id: power_button
     disabled_by_default: true
+    filters:
+      - delayed_on_off: 20ms
     on_multi_click:
       - timing:
           - ON for at most 1s
           - OFF for at least 0.2s
         then:
-          - switch.toggle: relay
+          # Ignore short press when child lock is on, to stop kids toggling the socket
+          - if:
+              condition:
+                switch.is_off: child_lock
+              then:
+                - switch.toggle: relay
       - timing:
           - ON for at least 4s
         then:
-          - button.press: Reset
+          # Ignore long press when child lock is on, to prevent accidental factory reset
+          - if:
+              condition:
+                switch.is_off: child_lock
+              then:
+                - button.press: Reset
 
 sensor:
   - platform: uptime
@@ -372,6 +384,15 @@ switch:
     on_turn_off:
       - light.turn_off: red_led
 
+  # Child lock: when on, ignore physical button short/long press, but keep remote (HA/web) control working
+  - platform: template
+    name: "Child Lock"
+    id: child_lock
+    icon: mdi:lock
+    optimistic: true
+    restore_mode: RESTORE_DEFAULT_OFF   # Keep last state after power loss/reboot, default off on first boot
+    entity_category: config
+
 light:
   - platform: status_led
     name: "Status LED"