New binaries, README update

This commit is contained in:
martin-ger
2019-05-12 09:32:40 +02:00
parent 3037a49534
commit 3475ab52ed
4 changed files with 4 additions and 4 deletions
+2 -2
View File
@@ -426,6 +426,6 @@ If configured correctly, the update will start and the ESP will reboot with the
# Known Issues
- Due to the limitations of the ESP's SoftAP implementation, there is a maximum of 8 simultaniously connected stations.
- The ESP8266 requires a good power supply as it produces current spikes of up to 170 mA during transmit (typical average consumption is around 70 mA when WiFi is on). Check the power supply first, if your ESP runs unstable and reboots from time to time. A large capacitor between Vdd and Gnd can help if you experience problems here.
- All firmware published after 17/Oct/2017 have been built with the patched version of the SDK 2.1.0 from Espressif that mitigates the KRACK (https://www.krackattacks.com/ ) attack.
- The ESP8266 requires a good power supply as it produces current spikes of up to 170 mA during transmit (typical average consumption is around 70 mA when WiFi is on). Check the power supply first, if your ESP runs unstable, has a bad throughput, or reboots from time to time. A large capacitor between Vdd and Gnd can help if you experience problems here. It has been reported that there are sometimes severe throughput problems with the small power supply/serial-to-usb boards for the ESP01. These boards use an XC6206 voltage regulator labeled "662K". Maybe you try an alternative power supply first, if you experience these kind of problems.
Binary file not shown.
Binary file not shown.
+2 -2
View File
@@ -1,3 +1,3 @@
395f45b647160508f01a00ce1244ce0f0120ff14 firmware/0x02000.bin
d26a4ec5a1d88dbd447929b3d236112980626744 firmware/0x82000.bin
2dd44516882b6f950962565d509b150e3e80696d firmware/0x02000.bin
b358bd8bff5dc075a4872a9cbbdf67d938b041c3 firmware/0x82000.bin
9bd7d25204d71b3db5f35e0b2def8a6aaa7f765c firmware/0x00000.bin