updated version

argonfanhat.sh

@@ -8,6 +8,7 @@ argon_create_file() {
 	sudo touch $1
 	sudo chmod 666 $1
 }
+
 argon_check_pkg() {
 	RESULT=$(dpkg-query -W -f='${Status}\n' "$1" 2> /dev/null | grep "installed")
 
@@ -26,6 +27,10 @@ then
 	if [ "$ID" = "raspbian" ]
 	then
 		CHECKPLATFORM="Raspbian"
+	elif [ "$ID" = "debian" ]
+	then
+		# For backwards compatibility, continue using raspbian
+		CHECKPLATFORM="Raspbian"
 	elif [ "$ID" = "ubuntu" ]
 	then
 		CHECKPLATFORM="Ubuntu"
@@ -61,7 +66,6 @@ if [ $? -eq 0 ]
 then
 	# Enable i2c and serial
 	sudo raspi-config nonint do_i2c 0
-	sudo raspi-config nonint do_serial 2
 fi
 
 # Helper variables
@@ -72,6 +76,8 @@ daemonconfigfile=/etc/$daemonname.conf
 configscript=/usr/bin/argonone-config
 removescript=/usr/bin/argonone-uninstall
 
+
+
 daemonfanservice=/lib/systemd/system/$daemonname.service
 
 if [ ! -f $daemonconfigfile ]; then
@@ -108,6 +114,7 @@ argon_create_file $shutdownscript
 
 echo "#!/usr/bin/python3" >> $shutdownscript
 echo 'import sys' >> $shutdownscript
+echo 'import time' >> $shutdownscript
 echo 'import smbus' >> $shutdownscript
 echo 'import RPi.GPIO as GPIO' >> $shutdownscript
 echo 'rev = GPIO.RPI_REVISION' >> $shutdownscript
@@ -117,7 +124,10 @@ echo 'else:' >> $shutdownscript
 echo '	bus = smbus.SMBus(0)' >> $shutdownscript
 
 echo 'if len(sys.argv)>1:' >> $shutdownscript
-echo "	bus.write_byte(0x1a,0)"  >> $shutdownscript
+echo '	address=0x1a' >> $shutdownscript
+
+# Fan off
+echo "	bus.write_byte(address,0)"  >> $shutdownscript
 
 
 sudo chmod 755 $shutdownscript
@@ -139,6 +149,7 @@ echo 'else:' >> $powerbuttonscript
 echo '	bus = smbus.SMBus(0)' >> $powerbuttonscript
 
 
+
 echo 'def get_fanspeed(tempval, configlist):' >> $powerbuttonscript
 echo '	for curconfig in configlist:' >> $powerbuttonscript
 echo '		curpair = curconfig.split("=")' >> $powerbuttonscript
@@ -189,11 +200,12 @@ echo '		return []' >> $powerbuttonscript
 echo '	return newconfig' >> $powerbuttonscript
 
 echo 'def temp_check():' >> $powerbuttonscript
+echo '	address=0x1a' >> $powerbuttonscript
+
 echo '	fanconfig = ["65=100", "60=55", "55=10"]' >> $powerbuttonscript
 echo '	tmpconfig = load_config("'$daemonconfigfile'")' >> $powerbuttonscript
 echo '	if len(tmpconfig) > 0:' >> $powerbuttonscript
 echo '		fanconfig = tmpconfig' >> $powerbuttonscript
-echo '	address=0x1a' >> $powerbuttonscript
 echo '	prevblock=0' >> $powerbuttonscript
 echo '	while True:' >> $powerbuttonscript